accurate smokeless powder - david's reloading...

1 / 18640/ACCURATE ARMS—2000 Loading Manual (12-20-00 10:23:36)

Accurate

SmokelessPowder

DISCLAIMER

Accurate Arms Company, Inc. disclaims all possible liability for

damages, including actual, incidental and consequential, result-

ing from usage of information or advice contained in this book.

Use data and advice at your own risk and with caution.

Accurate Arms Company, Inc.McEwen, Tennessee

http://www.booksonboard.com



TABLE OF CONTENTSAccurate Powder Specifications.................................................................. Inside Front Cover

Introduction.......................................................................................................................... 3

Acknowledgments ................................................................................................................ 4

Legend ................................................................................................................................ 4

Accurate Smokeless Powder Descriptions ........................................................................... 6

Smokeless Powder Storage .................................................................................................. 8

Handgun Data......................................................................................................................12

Cowboy Action Shooting.......................................................................................................19

XMP-5744 Handgun Data.....................................................................................................23

XMP-5744 Rifle Data ............................................................................................................25

Rifle Data............................................................................................................................. 31

Bushing Data for Shotshell Powders .....................................................................................45

Shotshell Data......................................................................................................................47

A Quick Guide to Shotshell Primers......................................................................................63

What’s New in This Manual• .300 Whisper Loading Data• 7.62x25mm Tokarev Loading Data• Updated .357 Mag Data• .338 Remington Ultra Mag Loading Data• Updated .45/70 Trapdoor Data plus new .450 Marlin Data• .45/90 and .45/110 Loading Data• Updated Shotshell Data with Cowboy Action Data• Contact to order new reloading manual on inside back cover

2001 Accurate Arms Company, Inc., McEwen, Tennessee.


INTRODUCTIONThis booklet is an introductory guide to the use of our Accurate Smokeless Powders,

including the ScotTM series of shotshell powders. The data for the metallic cartridgeshas been derived from our new, complete reloading guide. (It is available from your local dealer,or check the cover of this booklet for ordering details.) The shotshell data is the latest we haveavailable on the Scot series.

As with all editions of our loading data, you must be aware that the velocities gener-ated in your gun may differ from what is listed in this guide. This guide is a report of thevelocities developed on a given day under a given set of lab conditions. Some variation invelocity should be expected. All velocities, except shotshell, were measured using Oehler 55Light Screens. Shotshell velocities are measured with induction coils.

In the charge tables for metallic cartridges there is no ‘‘START’’ charge listed. Thischarge should be calculated as 10% below the ‘‘MAXIMUM’’ charge listed. (Multiply themaximum charge weight by 0.90.) There is a possibility that changing components from thoselisted could cause the maximum charge to be excessive, thus use of the calculated charge isnecessary. Some batches of military brass may require reducing the charge even further to keepchamber pressure in line.

The charge tables for shotshell cartridges are set up to be used as listed. No calculationof a different charge is needed. The shot weights listed in this booklet are for lead shot; steelshot may not be substituted.

If you find indications of excessive pressure while using loads in this guide STOPTESTING, and verify all data and loading procedures. If things seem to be in order, checkwith our lab personnel before proceeding. The phone number to use is 800-416-3006.

In reloading the prime concern should be SAFETY. Always wear eye protection whenreloading, even when working with ‘‘non-volatile’’ components. Always keep the reloading areaclean. Never have more than one propellant within easy reach at any given time. Avoid havingsimilar looking bullets of different weights on the bench at the same time. Read the safety notesin the center of the booklet before loading.

If you are new to reloading we recommend that you obtain and read a book such as DeanGrennell’s ABC’s of Reloading. It will help provide the basics for getting started. Loading manualsfrom the bullet companies provide information about reloading for metallic cartridges. All loadingtools (metallic and shotshell) come with instructional text.

3

INTRODUCTION


LEGEND

ACKNOWLEDGMENTSThe following companies have been helpful in the preparation of this loading guide:

Ballistic Products Barnes Bullets C. Sharps ArmsBull-X Bullets CCI/Speer Douglas BarrelsEldorado Cartridge Clements Casting Hornady BulletsLee Precision Cooper Arms Magnum ResearchMiller Arms Forster Products Mayville Engineering (MEC)Penny’s Casting Freedom Arms Nosler BulletsRedding-SAECO Lyman Products RCBSStarline Precision Machine Remington Arms CompanyThompson/Center Arms Sierra Bullets White Rock Tool & DieWolfe Publishing Company H-S Precision Bill Wiseman

LEGENDA-F A-Frame NOS NoslerBAR Barnes NR No recommendationBP Ballistic Products OAL Overall lengthBT Ballistic Tip OZ OunceCB Claybuster PART PartitionCLE Clements PC Pattern controlDGW Dixie Gun Works PEN Penny’s Custom BulletsDE Double end wadcutter PMC PMC/Eldorado CartridgeF/S Feet per second POST PostellFA Freedom Arms PSPCL Pointed Soft Point Core-LoktFED Federal REM RemingtonFIO Fiocchi RN Round NoseFN Flat Nose RPM Rock Pistol ManufacturingGD Gold Dot S SoloGS Grand Slam S&W Smith and WessonH&R Harrington and Richardson SCHM SchmitzerHB Hollow base wadcutter SP SpitzerHDY Hornady SPBT Soft Point Boat TailHPBT Hollow Point Boat Tail SPR SpeerIMI Israel Military Industries SRA Sierra(L) Lead SWC Semi-wadcutterLY Lyman SWF SwiftMAX Maximum T/C Thompson/Center ArmsMIL Military ULA Ultra Light ArmsMIN Minimum WIN WinchesterN100 Nitro 100 X X Hollow Point

4


WARNING!!!In recent years it has become very apparent that there exists a situation

regarding some pistols chambered for the 40 S&W cartridge. Some of the pistolscurrently available to shooters may not provide complete support to the casewhen a cartridge is chambered.

The Sporting Arms and Ammunition Manufacturers Institute (SAAMI) hasestablished a maximum average pressure for the 40 S&W of 35,000 psi. Theloading data published by Accurate Arms was developed in our ballisticlaboratory in accordance with SAAMI test methods and equipment and does notexceed this figure. This information is safe for use in firearms which providecomplete support of the case. Failure to fully support the case with cartridgesof such intensity may result in bulged cases, ruptured cases, separated caseheads or other consequences which may result in damage to the firearm and/or injury or death to the shooter and/or bystanders. This can happen no matterwhose propellant is used.

If you own a firearm chambered for the 40 S&W, we recommend you contactthe manufacturer to determine if the case is fully supported, or have a competentgunsmith examine the firearm and determine the amount of support providedthe case. If your firearm does not provide complete support for the case, DONOT USE Accurate Arms Company data or products to reload your 40S&W ammunition.

This is the first time Accurate Arms Company has felt it necessaryto place such a restriction on the use of our products, but the continued safetyand welfare of the shooting public compels us to do so.

5

SPECIFICATIONS




SPECIFICATIONS

Accurate Smokeless PowdersThe Accurate Smokeless Powders listed below are in approximate burning order from fastestto slowest. All propellants are manufactured with nitrocotton as the main energetic ingredient.Double base propellants have nitroglycerin (glyceryl trinitrate) as the second energetic ingredient.

PISTOL PROPELLANTSNo. 2 ImprovedTM A fast burning, low density ball propellant developed for use in .38 Special target loads.Excellent for target loads in almost all handgun cartridges, especially where low pressure and cleanburning are desirable. Its low charge weights help the handloader stretch his shooting dollar.

No. 5TM A relatively fast burning double base, ball propellant developed for use in the .45 ACP that issomewhat slower than Unique. No. 5 is used in more handgun cartridges than any of our other handgunpropellants. This is our most versatile handgun propellant.

No. 7TM A double base, ball propellant originally developed for 9 mm NATO carbine ammunition. It hasbecome a favorite propellant for IPSC shooters. Somewhat more specialized in applications than No. 2 orNo. 5, it is well-suited to high intensity cartridges. It is a good choice for magnum handgun cartridges(such as 357, 41, and 44 magnum) when slightly less than full power loads are preferred.

No. 9 Our slowest handgun propellant, No. 9 is the best .44 magnum powder available. This doublebase, ball propellant gives excellent velocities for the pressures generated, and with less flash than compa-rable powders. It is intended for use in large capacity handgun cartridges (357, 41, 44 magnum, and 454Casull). No. 9 is also suited to some small rifle cases (25/20, .30 Carbine) and the .410 shotgun. No. 9performs best with heavier bullets in most cartridges. A heavy bullet pull is required for consistent perfor-mance when using lighter bullets.

PISTOL/RIFLE PROPELLANTSXMP-5744TM This short cut, extruded, double base rifle and pistol propellant is designed for use primarilyin the Sharps Rifle Cartridges. It also works well in large capacity handgun cartridges of both conventionaland IHMSA design. Shooters of cast bullets and reduced loads will find it useful in just about everythingfrom the 22 Hornet to the 50/140 Sharps.

RIFLE PROPELLANTS1680TM A double base, ball propellant which performs well in the 7.62 x 39mm cartridge. It is the bestpowder for the 22 Hornet. Also suitable for small capacity cases such as the T/CU series, the .222Remington and the .223 Remington with lighter bullets.

XMR-2015TM (Formerly 2015BR) A single base, small-grained, extruded propellant developed for ‘‘benchrest’’ cartridges, such as the PPC and BR series. This powder was tested at the bench rest nationals in1990 and subsequently adopted by shooters such as Ferris Pindell and Sal Ventimiglia. XMR-2015TM isextremely flexible giving excellent performance in many cartridges from 22 Hornet to 458 WinchesterMagnum.

2230TM One of our most popular rifle propellants. A double base, ball propellant developed for use in the223 Remington (5.56 NATO). 2230 is very popular with those shooters who load large quantities of .223Remington ammo.

2460TM This medium-burning ball propellant is popular with NRA, IHMSA, and bench rest shooters. Usefulin a wide variety of cartridges, it is slightly slower than 2230 and shows a small pressure advantage over2230 in bores of 7mm and over. An excellent choice in .308 Winchester, 2460 is appropriate for use withAR-15, M1 and M14 (M1A) service rifles.

6


XMR-2495TM (Formerly 2495BR) Very similar to 4895, this single base, extruded propellant gives greatperformance in a wide variety of cartridges. It offers service rifle shooters who prefer extruded propellantsan Accurate alternative to our 2520. Now with reduced flash.

2520TM This medium-slow burning, ball propellant gives excellent results in medium capacity cases (308class) and certain applications in large bore cartridges. This powder was in the winner’s circle in NRAHigh Power competition before it had been on the market two years! 2520 is the first choice for targetshooters using 168 grain bullets in the .308 Winchester. 2520 has a pressure curve appropriate for usewith M1 and M14 (M1A) service rifles. In fact, some shooters now call it the ‘‘Camp Perry’’ powder.

XMR-4064TM Very similar to IMR 4064. This single base rifle propellant is short cut for better meteringwhile delivering the performance shooters have come to expect from 4064. This propellant meets theneeds of service rifle competitors and hunters who prefer extruded powders. Admirers of the 30–06 willespecially like this propellant.

2700TM A double base ball propellant that fills the gap between 2520 and our 4350. It is intended to beused as a heavy bullet powder in many cartridges. Excellent in the .22–250 Remington and the .220 Swiftwith varmint bullets.

XMR-4350TM America’s most popular reloading propellant for rifle cartridges. A single base, extrudedpropellant similar to IMR 4350. Delivers superb results in cartridges from the 243 Winchester and 270Winchester to the largest magnums.

XMR-3100TM A single base, extruded propellant that serves well from the .243 Winchester to the bigmagnums, particularly the 7mm Remington Magnum. It has proven to be a cost effective replacement forIMR-4831 and H-4831.

8700TM The slowest powder available to reloaders. This slow burning double base, ball propellant is bestsuited to the magnum rifle cases such as the .257 Weatherby Magnum, .264 Winchester Magnum, .270Weatherby Magnum, 7mm Remington Magnum, and .300 Weatherby Magnum. 8700 may also be usedin cartridges such as the .25/06 Remington and .270 Winchester (velocity and pressure will be reducedfrom normal, but accuracy is outstanding). Interestingly, it performs well in a large variety of cartridges forcast bullet loads. Use of a magnum primer is recommended for best results.

SHOTSHELL PROPELLANTSNitro 100TM A fast burning, double base disc propellant. Developed for 7⁄8, 1, and 11⁄8 ounce of shot in 12gauge for trap, skeet, and light field loads. Clean burning in all applications. An excellent choice for lowpressure/low loading density applications in handgun cartridges.

Solo 1000TM A fast, ultra-clean burning, porous, single base, disc powder ideal for all shotguns. Highlyuniform grain size. The champion’s choice for 12 gauge clay targets or indoor/outdoor .38, and .45 ACP.

Solo 1250TM A single base, clean burning shotshell propellant that ranges in use from 12 gauge fieldloads to 28 gauge. An excellent choice for trap, skeet or sporting clays.

4100TM A fine-grained, double-based ball propellant developed for use with .410 bore shotshells. Ideallysuited to 21⁄2" skeetloads.

7

SPECIFICATIONS


SAFETY

PROPERTIESAND STORAGEOF SMOKELESSPOWDER

DANGER!SMOKELESS GUNPOWDEREXTREMELY FLAMMABLE

KEEP AWAY FROM HEAT, SPARKSOR OPEN FLAME

STORE IN A COOL DRY PLACE

KEEP OUT OF THE REACHOF CHILDREN

Ammunition handloading has become increasingly popular in recent years. This leaflet discusses proper-ties of smokeless powder and offers recommendations for its storage. This leaflet is intended to increasethe knowledge of all concerned individuals and groups regarding smokeless powder. The statements andrecommendations made are not intended to supersede local, state or Federal regulations. Proper authori-ties should be consulted on regulations for storage and use of smokeless powder in each specific commu-nity. A second leaflet entitled ‘‘SPORTING AMMUNITION PRIMERS: PROPERTIES, HANDLING, &STORAGE FOR HANDLOADING’’ supplements this leaflet on Smokeless Powders.

PROPERTIES OF SMOKELESS POWDERSmokeless powders, or propellants, are essentially mixtures of chemicals designed to burn under controlledconditions at the proper rate to propel a projectile from a gun. Smokeless powders are made in three forms:

1. Thin, circular flakes or wafers2. Small cylinders3. Small spheres

Single-base smokeless powders derive their main source of energy from nitrocellulose.The energy released from double-base smokeless powders is derived from both nitrocellulose and nitro-glycerin.All smokeless powders are extremely flammable; by design, they are intended to burn rapidly and vigor-ously when ignited.Oxygen from the air is not necessary for the combustion of smokeless powders since they contain sufficientbuilt-in oxygen to burn completely, even in an enclosed space such as the chamber of a firearm.In effect, ignition occurs when the powder granules are heated above their ignition temperature. This canoccur by exposing powder to:

1. A flame such as a match or primer flash.2. An electrical spark or the sparks from welding, grinding, etc.3. Heat from an electric hot plate or a fire directed against or near a closed container even

if the powder itself is not exposed to the flame.When smokeless powder burns, a great deal of gas at high temperature is formed. If the powder is confined,this gas will create pressure in the surrounding structure. The rate of gas generation is such, however,that the pressure can be kept at a low level if sufficient space is available or if the gas can escape.

SPORTING ARMS AND AMMUNITION MANUFACTURERS’ INSTITUTE, INC.555 DANBURY ROAD, WILTON, CT 06897

8


In this respect smokeless powder differs from blasting agents or high explosives such as dynamite orblasting gelatin, although smokeless powder may contain chemical ingredients common to some ofthese products.High explosives such as dynamite are made to detonate, that is, to change from solid state to gaseousstate with evolution of intense heat at such a rapid rate that shock waves are propagated through anymedium in contact with them. Such shock waves exert pressure on anything they contact, and, as a matterof practical consideration, it is almost impossible to satisfactorily vent away the effects of a detonationinvolving any appreciable quantity of dynamite.Smokeless powder differs considerably in its burning characteristics from common ‘‘black powder.’’Black powder burns essentially at the same rate out in the open (unconfined) as when in a gun.When ignited in an unconfined state, smokeless powder burns inefficiently with an orange colored flame.It produces a considerable amount of light brown noxious smelling smoke. It leaves a residue of ash andpartially burned powder. THE FLAME IS HOT ENOUGH TO CAUSE SEVERE BURNS.The opposite is true when it burns under pressure as in a cartridge fired in a gun. Then it produces verylittle smoke, a small glow, and leaves very little or no residue. The burning rate of smokeless powderincreases with increased pressure.If burning smokeless powder is confined, gas pressure will rise and eventually can cause the container toburst. Under such circumstances, the bursting of a strong container creates effects similar to an explosion.For this reason, the Department of Transportation (formerly Interstate Commerce Commission) sets specifi-cations for shipping containers for propellants and requires tests of loaded containers—under actual fireconditions—before approving them for use.When smokeless powder in D.O.T. approved containers is ignited during such tests, container seams splitopen or lids pop off—to release gases and powder from confinement at low pressure.

HOW TO CHECK SMOKELESS POWDER FOR DETERIORATIONAlthough modern smokeless powders are basically free from deterioration under proper storage conditions,safe practices require a recognition of the signs of deterioration and its possible effects.Powder deterioration can be checked by opening the cap on the container and smelling the contents.Powder undergoing deterioration has an irritating acidic odor. (Don’t confuse this with common solventodors such as alcohol, ether and acetone.)Check to make certain that powder is not exposed to extreme heat as this may cause deterioration. Suchexposure produces an acidity which accelerates further reaction and has been known, because of theheat generated by the reaction, to cause spontaneous combustion.Never salvage powder from old cartridges and do not attempt to blend salvaged powder with new powder.Don’t accumulate old powder stocks.The best way to dispose of deteriorated smokeless powder is to burn it out in the open at an isolatedlocation in small shallow piles (not over 1" deep). The quantity burned in any one pile should never exceedone pound. Use an ignition train of slow burning combustible material so that the person may retreat to asafe distance before powder is ignited.

CONSIDERATIONS FOR STORAGE OF SMOKELESS POWDERSmokeless powder is intended to function by burning, so it must be protected against accidental exposureto flame, sparks or high temperatures.For these reasons, it is desirable that storage enclosures be made of insulating materials to protect thepowder from external heat sources.Once smokeless powder begins to burn, it will normally continue to burn (and generate gas pressure) untilit is consumed.D.O.T. approved containers are constructed to open up at low internal pressures to avoid the effectsnormally produced by the rupture or bursting of a strong container.Storage enclosures for smokeless powder should be constructed in a similar manner:

9

SAFETY


SAFETY

1. Of fire resistant and heat-insulating materials to protect contents from external heat.2. Sufficiently large to satisfactorily vent the gaseous products of combustion which would

result if the quantity of smokeless powder within the enclosure accidentally ignited.If a small, tightly enclosed storage enclosure is loaded to capacity with containers of smokeless powderthe walls of the enclosure will expand or move outwards to release the gas pressure—if the powder instorage is accidentally ignited.Under such conditions, the effects of the release of gas pressure are similar or identical to the effectsproduced by an explosion.Hence only the smallest practical quantities of smokeless powder should be kept in storage, and then instrict compliance with all applicable regulations and recommendations of the National Fire ProtectionAssociation (reprinted at end of leaflet).

RECOMMENDATIONS FOR STORAGE OF SMOKELESS POWDERSTORE IN A COOL, DRY PLACE. Be sure the storage area is free from any possible sources of excessheat and is isolated from open flame, furnaces, hot water heaters, etc. Do not store smokeless powderwhere it will be exposed to the sun’s rays. Avoid storage in areas where mechanical or electrical equipmentis in operation. Restrict from the storage areas heat or sparks which may result from improper, defectiveor overloaded electrical circuits.DO NOT STORE SMOKELESS POWDER IN THE SAME AREA WITH SOLVENTS, FLAMMABLE GASESOR HIGHLY COMBUSTIBLE MATERIALS.STORE ONLY IN DEPARTMENT OF TRANSPORTATION APPROVED CONTAINERS.Do not transfer the powder from an approved container into one which is not approved.DO NOT SMOKE IN AREAS WHERE POWDER IS STORED OR USED. Place appropriate ‘‘No Smoking’’signs in these areas.DO NOT SUBJECT THE STORAGE CABINETS TO CLOSE CONFINEMENT.STORAGE CABINETS SHOULD BE CONSTRUCTED OF INSULATING MATERIALS AND WITH A WEAKWALL, SEAMS OR JOINTS TO PROVIDE AN EASY MEANS OF SELF-VENTING.DO NOT KEEP OLD OR SALVAGED POWDERS. Check old powders for deterioration regularly. Destroydeteriorated powders immediately.OBEY ALL REGULATIONS REGARDING QUANTITY AND METHODS OF STORING. Do not store all yourpowders in one place. If you can, maintain separate storage locations. Many small containers are saferthan one or more large containers.KEEP YOUR STORAGE AND USE AREA CLEAN. Clean up spilled powder promptly. Make sure thesurrounding area is free of trash or other readily combustible materials.

KNOW THE FOLLOWING RECOMMENDATIONS ON STORAGE AND HANDLING ISSUED BY THE NA-TIONAL FIRE PROTECTION ASSOCIATION, BATTERY MARCH PARK, QUINCY, MASS. 02269 AND RE-PRINTED WITH THEIR PERMISSION: CODE FOR THE MANUFACTURE, TRANSPORTATION STORAGE,AND USE OF EXPLOSIVE MATERIALS NFPA NO. 495-1992.CHAPER 10. SMALL ARMS AMMUNITION AND PRIMERS, SMOKELESS PROPELLANTS AND BLACKPOWDER PROPELLANTS

10–3. SMOKELESS PROPELLANTS10–3.1 Quantities of smokeless propellants not exceeding 25 lb (11.3 kg) in shipping containers approved

by the U.S. Department of Transportation may be transported in a private vehicle.10–3.2 Quantities of smokeless propellants exceeding of 25 lb (11.3 kg) but not exceeding 50 lb (22.7

kg), transported in a private vehicle, shall be transported in a portable magazine having woodwalls of at least 1-inch (25.4 mm) nominal thickness.

10


10–3.3 Transportation of more than 50 lb (22.7 kg) of smokeless propellants in a private vehicle is pro-hibited.

10–3.4 Commercial shipments of smokeless propellants in quantities not exceeding 100 lb (45.4 kg) areclassified for transportation purposes as flammable solids when packaged according to U.S.Department of Transportation Hazardous Materials Regulations (Title 49 Code of Federal Regula-tions, Part 173.197a), and shall be transported accordingly.

10–3.5 Commercial shipments of smokeless propellants exceeding 100 lb (45.4 kg) or not packaged inaccordance with the regulations cited in 10–3.4 shall be transported according to U.S. Departmentof Transportation regulations for Class B propellant explosives.

10–3.6 Smokeless propellants shall be stored in shipping containers specified by the U.S. Department ofTransportation Hazardous Materials Regulations.

10–3.7 Smokeless propellants intended for personal use in quantities not exceeding 20 lb (9.1 kg) maybe stored in original containers in residences. Quantities exceeding 20 lb (9.1 kg) but not exceeding50 lb (22.7 kg), may be stored in residences if kept in a wooden box or cabinet having walls of atleast 1-inch (25.4 mm) nominal thickness.

10–3.8 Not more than 20 lb (9.1 kg) of smokeless propellants, in containers of 1 lb (0.45 kg) maximumcapacity, shall be displayed in commercial establishments.

10–3.9 Commercial stocks of smokeless propellants shall be stored as follows:a. Quantities exceeding 20 lb (9.1 kg), but not exceeding 100 lb (45.4 kg), shall be stored in portable

wooden boxes having walls of at least 1-in. (25.4 mm) thickness.b. Quantities exceeding 100 lb (45.4 kg), but not exceeding 800 lb (363 kg), shall be stored in

nonportable storage cabinets having walls of at least 1-in. (25.4 mm) thickness. Not more than400 lb (181 kg) may be stored in any one cabinet, and cabinets shall be separated by a distanceof at least 25 ft (7.63 m) or by a fire partition having a fire resistance of at least 1 hr.

c. Quantities exceeding 800 lb (363 kg), but not exceeding 5,000 lb (2268 kg), may be stored in abuilding if the following requirements are met:

1. The warehouse or storage room shall not be accessible to unauthorized personnel.2. Smokeless propellant shall be stored in nonportable storage cabinets having wood walls at least

1-in. (25.4 mm) thick and having shelves with not more than a 3 ft separation between shelves.3. No more than 400 lb (181 kg) shall be stored in any one cabinet.4. Cabinets shall be located against walls of the storage room or warehouse with at least 40 ft (12.2

m) between cabinets.5. Separation between cabinets may be reduced to 20 ft (6.1 m) if barricades twice the height of

the cabinets are attached to the wall, midway between each cabinet. The barricades shall extendat least 10 ft (3 m) outward, shall be firmly attached to the wall, and shall be constructed of 1/4-in. (6.4 mm) boiler plate, 2-in. (51 mm) thick wood, brick, or concrete block.

6. Smokeless propellant shall be separated from materials classified by the U.S. Department ofTransportation as flammable liquids, flammable solids, and oxidizing materials by a distance of25 ft (7.63 m) or by a fire partition having a fire-resistance of at least 1 hour.

7. The building shall be protected by an automatic sprinkler system installed according to NFPANo. 13, Standard for the Installation of Sprinkler Systems.

d. Smokeless propellants not stored according to (a), (b), and (c) above shall be stored in a type 4magazine constructed and located according to Chapter 6.

Reprinted with permission from NFPA 495-1992, Code for the Manufacture, Transportation, Storage and Use of ExplosiveMaterials, Copyright 1992, National Fire Protection Association, Quincy, MA 02269. This reprinted material is not the completeand official position of the NFPA on the referenced subject which is represented only by the standard in its entirety.

11

SAFETY


HANDGUN

HANDGUN DATA 12 HANDGUN DATA

HANDGUN DATAFOR MORE COMPLETE LOADING INFORMATION, BUY ACCURATE’S RELOADING

MANUAL, BOOK TWO. SEE INSIDE BACK COVER FOR DETAILS.

7mm T/CUGun DOUGLASBarrel length 14"Primer CCI 400Case REM

Maximum LoadsBullet Powder Grains Vel.(L) 145 RCBS 1680 22.5 1903OAL = 2.500" 2230 28.0 2057

2460 28.5 20832520 28.5 2034

SRA 100 HP 1680 28.0 2435OAL = 2.430" 2015 28.0 2135

2230 30.0 22452460 30.0 22282520 28.0 2029

SRA 120 SP 1680 26.5 2226OAL = 2.545" 2015 28.0 2137

2230 29.5 21732460 30.0 21752520 28.0 1974

SRA 140 SBT 1680 24.5 2010OAL = 2.540" 2015 27.0 2058

2230 28.5 21022460 29.0 21092520 27.5 1952

NOS 150 BT 1680 22.0 1817OAL = 2.575" 2015 26.0 1973

2230 27.5 19972460 28.0 20132520 27.5 1897

HDY 162 HPBT 1680 22.5 1855OAL = 2.640" 2015 26.0 1975

2230 27.0 19642460 27.5 19592520 27.5 1882

REM 175 PSP 1680 21.5 1629OAL = 2.495" 2015 26.0 1849

2230 27.0 17872460 27.0 18022520 27.5 1771

TECH LINE: 1-800-416-3006WARNING: Reduce listed load by 10% for a start charge.(*) Do not exceed start charge if Winchester small pistol magnum primers are used.

7mm IHMSAGun DOUGLASBarrel length 14"Primer CCI 200Case REM

Maximum LoadsBullet Powder Grains Vel.HDY 139 SP 2230 36.5 2325OAL = 2.765" 2460 37.0 2348

2520 37.5 2335NOS 150 BT 2230 35.5 2245OAL = 2.650" 2460 36.0 2248

2520 36.0 2207SRA 168 HPBT 2230 34.5 2100OAL = 2.650" 2460 35.0 2123

2520 35.5 2132

7mm BR REMINGTONGun DOUGLASBarrel length 15"Primer REM 71⁄2

Case REMMaximum Loads

Bullet Powder Grains Vel.HDY 120 SSP 2015 29.0 2364OAL = 2.225" 2230 31.0 2360

2460 31.5 23742520 32.0 2397

HDY 139 SP 2015 28.0 2191OAL = 2.305" 2230 30.0 2188

2460 31.0 22472520 31.0 2212

SRA 150 SBT 2015 27.5 2144OAL = 2.255" 2230 29.0 2123

2460 29.5 21502520 30.5 2178

SRA 168 HPBT 2015 26.0 1959OAL = 2.310" 2230 28.0 1984

2460 28.5 20182520 30.0 2077


HANDGUN DATA 13 HANDGUN DATA30 HERRETTGun DOUGLASBarrel length 14"Primer REM 91⁄2


Bullet Powder Grains Vel.HDY 130 SSP 2015 30.0 2159OAL = 2.295" 2230 32.0 2125

2460 32.5 2126HDY 150 SP 2015 27.5 1947OAL = 2.385" 2230 30.0 1960

2460 30.5 1979SRA 165 SBT 2015 26.0 1854OAL = 2.490" 2230 27.5 1796

2460 28.0 1831.300 WHISPERGun WISEMANBarrel length 16"Primer REM 71⁄2


Bullet Powder Grains Vel.NOS 125 BT No.2 4.8 1095**OAL = 2.050" No.5 5.6 1054**

No.7 6.2 1071**No.9 13.7 19431680 18.5 19155744 18.0 1969

SRA 165 SPBT No.2 5.8 1090**OAL = 2.265" No.5 5.6 1092**

No.7 7.0 1097**No.9 12.0 16311680 17.0 17095744 15.3 1666

SRA 220 HPBT No.2 5.5 889OAL = 2.265" No.5 6.3 1062**

No.7 7.5 1043**No.9 9.5 12231680*** 11.5 11245744*** 11.0 1181

7.62x25mm TOKAREV (CZ-52 only)Gun DOUGLASBarrel length 9"Primer CCI 500Case STARLINE

Maximum LoadsBullet Powder Grains Vel.SRA 85 RN No.2 6.5 1640OAL = 1.316" No.5 8.5 1766

No.7 10.2 1773No.9 13.1 1972

NOTE: It is advisable to use bullets having a cannelure ring so the bullet may becrimped in place. If the bullet should slip back, it could create dangerouslyhigh chamber pressures.

WARNING: Reduce listed load by 10% for a start charge.(*) Do not exceed start charge if Winchester small pistol magnum primers are used.**Subsonic loads; do not reduce loads. ***Denotes a compressed charge.

7.62x25mm TOKAREV (CONTINUED)Maximum Loads

Bullet Powder Grains Vel.SPR 110 RN No.2 6.2 1447OAL = 1.300" No.5 8.0 1570

No.7 9.5 1620No.9 11.7 1688

30/30 WINCHESTERGun T/C CONTENDERBarrel length 14"Primer CCI 200Case FED

Maximum LoadsBullet Powder Grains Vel.HDY 110 RN 2015 35.5 2398OAL = 2.440" 2230 36.0 2340

2495 37.0 22132460 37.0 23692520 38.0 23664064 39.0 21792700 40.0 2290

HDY 130 SSP 2015 32.0 2168OAL = 2.625" 2230 34.0 2162

2495 33.0 19712460 35.0 21652520 37.0 22704064 38.0 22312700 38.0 2103

SPR 150 FN 2015 29.0 1929OAL = 2.540" 2230 31.7 2000

2495 30.5 18262460 32.5 20152520 33.5 20464064 33.0 18452700 37.0 2038

NOS 170 FN 2015 27.0 1793OAL = 2.545" 2230 30.0 1869

2495 29.5 17182460 30.2 18642520 31.5 18744064 30.0 16822700 35.0 1888

32 S&W LONGGun DOUGLASBarrel length 6"Primer FED 100*Case REM

Maximum LoadsBullet Powder Grains Vel.HDY 90 HBWC No.2 2.0 786OAL = 0.930"SRA 90 JHP No.2 2.5 886OAL = 1.190"

HANDGUN


HANDGUN

HANDGUN DATA 14 HANDGUN DATA32 H&R MAGNUMGun DOUGLASBarrel length 10"Primer CCI 500*Case FED

Maximum LoadsBullet Powder Grains Vel.(L) 100 SWC No.2 3.6 1160OAL = 1.310" No.5 4.7 1261HDY 85 JHP No.2 4.0 1269OAL = 1.325" No.5 5.3 1336SPR 100 JHP No.2 3.7 1146OAL = 1.335" No.5 5.0 1224

32/20 WINCHESTERGun RUGER BLACKHAWKBarrel length 61⁄2"Primer CCI 400*Case REM

Maximum LoadsBullet Powder Grains Vel.(L) 100 SWC No.5 4.8 865OAL = 1.585" No.7 6.1 924SRA 90 JHC No.5 5.0 906OAL = 1.565" No.7 6.1 937HDY 100 XTP No.5 4.7 844OAL = 1.565" No.7 5.8 887

32/20 CONTENDER ONLYGun DOUGLASBarrel length 14"Primer CCI 400*Case REM

Maximum LoadsBullet Powder Grains Vel.(L) 100 SWC No.5 6.0 1342OAL = 1.585" No.7 7.0 1325SRA 90 JHC No.5 6.2 1375OAL = 1.565" No.7 7.8 1461HDY 100 XTP No.5 6.0 1330OAL = 1.585" No.7 7.4 1365

380 AUTOGun OBERMEYERBarrel length 3"Primer CCI 500*Case FED

Maximum LoadsBullet Powder Grains Vel.(L) 100 RN No.2 3.6 943OAL = 0.950" No.5 4.5 922

WARNING: Reduce listed load by 10% for a start charge.(*) Do not exceed start charge if Winchester small pistol magnum primers are used.

380 AUTO (CONTINUED)Maximum Loads

Bullet Powder Grains Vel.HDY 90 XTP No.2 3.7 930OAL = 0.960" No.5 4.8 920SRA 95 FMJ No.2 3.7 934OAL = 0.945" No.5 4.8 891HDY 100 FMJ No.2 3.4 793OAL = 0.975" No.5 4.9 895

9mm LUGERGun OBERMEYERBarrel length 4"Primer WIN SP*Case FED

Maximum LoadsBullet Powder Grains Vel.(L) 115 SWC No.2 4.9 1146OAL = 1.100" No.5 6.3 1182

No.7 8.7 1225(L) 125 RN No.2 4.5 1063OAL = 1.100" No.5 6.2 1133

No.7 8.3 1156(L) 145 RN No.2 3.7 893OAL = 1.140" No.5 5.1 984

No.7 7.2 1052HDY 115 FMJ No.2 4.4 1092OAL = 1.095" No.5 7.0 1192

No.7 8.8 1196HDY 124 RN No.2 4.1 1057OAL = 1.095" No.5 6.4 1200

No.7 8.0 1166SPR 147 TMJ No.2 4.0 888OAL = 1.095" No.5 5.3 991

No.7 7.2 1047Note: Some high performance handguns (such as the

Glock and Sig/Sauer) may not cycle properly with thefaster powders.

38 SUPER AUTOGun WILSONBarrel length 5"Primer CCI 500*Case PMC


No.7 9.8 1320No.9 12.5 1374

(L) 130 RN No.2 4.4 1102OAL = 1.220" No.5 7.0 1185


HANDGUN DATA 15 HANDGUN DATA38 SUPER AUTO (CONTINUED)

Maximum LoadsBullet Powder Grains Vel.

No.7 9.0 1244No.9 11.5 1257

(L) 145 RN No.2 4.8 1078OAL = 1.250" No.5 6.8 1168

No.7 8.5 1165No.9 10.5 1207

(L) 160 RN No.2 4.5 1025OAL = 1.250" No.5 6.0 1048

No.7 8.0 1115No.9 9.5 1116

HDY 115 FMJ No.2 5.7 1200OAL = 1.240" No.5 8.3 1321

No.7 10.3 1340No.9 13.0 1395

IMI 124 FMJ No.2 5.4 1163OAL = 1.245" No.5 7.6 1230

No.7 9.6 1263No.9 12.5 1346

PMC 130 FMJ No.2 5.2 1116OAL = 1.250" No.5 7.3 1201

No.7 9.2 1209No.9 11.9 1305

CP 135 FMJ No.2 5.2 1140OAL = 1.250" No.5 7.0 1140

No.7 9.0 1190No.9 10.7 1199

CP 150 FMJ No.2 4.8 1038OAL = 1.250" No.5 6.5 1075

No.7 8.5 1148No.9 9.7 1111

HDY 158 JHP No.2 4.3 970OAL = 1.250" No.5 6.2 1026

No.7 8.0 1064No.9 9.7 1121

38 SPECIALGun S&W MODEL 14Barrel length 83⁄8"Primer CCI 500*Case HDY

Maximum LoadsBullet Powder Grains Vel.(L) 148 DEWC N100 2.7 863OAL = 1.252" S1000 2.7 830

No.2 3.5 850No.5 5.0 912

(L) 148 HBWC N100 2.8 882OAL = 1.152" S1000 2.8 837

No.2 2.9 720No.5 4.0 807


38 SPECIAL (CONTINUED)Maximum Loads

Bullet Powder Grains Vel.(L) 158 SWC N100 3.3 898OAL = 1.481" S1000 3.4 857

No.2 4.0 868No.5 5.9 940

HDY 110 XTP N100 4.4 1153OAL = 1.435" S1000 4.4 1094

No.2 5.6 1083No.5 7.3 1090

SPR 125 JHP N100 4.1 1031OAL = 1.445" S1000 4.1 1010

No.2 5.3 990No.5 6.8 860

SPR 140 JHP N100 3.9 933OAL = 1.445" S1000 3.9 889

No.2 4.7 888No.5 6.4 860

HDY 158 XTP N100 3.2 786OAL = 1.445" S1000 3.4 798

No.2 4.0 756No.5 5.8 841

357 MAGNUM (NEW DATA)Gun S&W 686Barrel length 6"Primer CCI 500*Case HDY


No.7 11.0 1413No.9 13.5 1499

SPR 110 JHP No.2 8.4 1676OAL = 1.575" No.5 12.0 1840

No.7 14.0 1850No.9 18.4 2006

HDY 125 XTP No.2 8.0 1557OAL = 1.570" No.5 11.5 1728

No.7 13.2 1735No.9 17.0 1872

SPR 140 JHP No.2 7.4 1429OAL = 1.575" No.5 11.0 1632

No.7 12.2 1600No.9 15.4 1699

HDY 158 XTP No.2 6.6 1260OAL = 1.580" No.5 9.8 1453

No.7 11.4 1624No.9 15.0 1633

HDY 180 XTP No.2 6.0 1114OAL = 1.575" No.5 9.2 1326

No.7 10.3 1329No.9 13.0 1437

HANDGUN


HANDGUN

HANDGUN DATA 16 HANDGUN DATA357 SIGGun HS PRECISIONBarrel length 4"Primer FED 100*Case FED


No.7 11.0 1344No.9 13.5 1430

(L) 122 FN No.2 5.8 1217OAL = 1.140" No.5 8.8 1300

No.7 10.7 1321No.9 13.0 1383

(L) 147 RN No.2 4.7 1049OAL = 1.140" No.5 7.5 1170

No.7 9.6 1218No.9 10.5 1170

SPR 88 JHP No.2 7.9 1545OAL = 1.130" No.5 11.1 1616

No.7 13.1 1601No.9 15.0 1545

SRA 95 FMJ No.2 7.6 1467OAL = 1.135" No.5 11.0 1572

No.7 13.0 1562No.9 15.0 1530

HDY 100 FMJ No.2 7.3 1414OAL = 1.140" No.5 10.5 1496

No.7 12.2 1490No.9 14.5 1516

HDY 115 XTP No.2 6.4 1276OAL = 1.140" No.5 9.4 1354

No.7 11.3 1385No.9 13.5 1434

HDY 124 XTP No.2 6.0 1212OAL = 1.140" No.5 9.2 1325

No.7 11.0 1320No.9 13.0 1387

SRA 130 FMJ No.2 6.0 1179OAL = 1.135" No.5 8.8 1253

No.7 10.4 1278No.9 12.0 1285

HDY 147 XTP No.2 5.3 1061OAL = 1.140" No.5 7.9 1159

No.7 9.2 1160No.9 10.5 1158

TECH LINE: 1-800-416-3006WARNING: Reduce listed load by 10% for a start charge.(*) Do not exceed start charge if Winchester small pistol magnum primers are used.

40 S&W (WARNING: See page 5.)Gun HS PRECISIONBarrel length 4"Primer CCI 500*Case HDY


No.7 9.7 1146No.9 12.0 1142

(L) 175 SWC No.2 5.3 975OAL = 1.115" No.5 6.1 986

No.7 8.4 1014No.9 10.2 998

(L) 205 FN No.2 4.3 838OAL = 1.110" No.5 5.0 836

No.7 6.6 845No.9 8.7 880

NOS 135 JHP No.2 7.6 1247OAL = 1.125" No.5 9.3 1266

No.7 11.2 1237No.9 NR

NOS 150 JHP No.2 7.0 1155OAL = 1.120" No.5 8.3 1170

No.7 10.2 1136No.9 NR

RAN 165 JHP No.2 5.8 1087OAL = 1.125" No.5 8.6 1151

No.7 10.3 1165No.9 13.0 1186

SPR 165 GD No.2 5.5 1052OAL = 1.125" No.5 8.4 1145

No.7 9.5 1105No.9 12.4 1150

HDY 180 XTP No.2 5.6 967OAL = 1.135" No.5 6.6 965

No.7 8.5 978No.9 11.0 1019

HDY 200 XTP No.2 4.7 815OAL = 1.130" No.5 5.5 828

No.7 7.4 850No.9 9.2 863

10mm AUTOGun HS PRECISIONBarrel length 5"Primer CCI 300Case HDY

Maximum LoadsBullet Powder Grains Vel.(L) 145 FN No.2 7.5 1293OAL = 1.250" No.5 9.7 1352

No.7 12.0 1367No.9 15.0 1422


HANDGUN DATA 17 HANDGUN DATA10mm AUTO (CONTINUED)


No.7 10.4 1199No.9 13.6 1285

(L) 205 FN No.2 5.2 979OAL = 1.250" No.5 7.0 1063

No.7 9.3 1091No.9 11.8 1157

NOS 135 JHP No.2 9.1 1444OAL = 1.250" No.5 11.4 1503

No.7 13.6 1476No.9 17.5 1507

HDY 155 JHP No.2 8.0 1296OAL = 1.250" No.5 10.0 1334

No.7 12.7 1379No.9 15.9 1414

NOS 170 JHP No.2 7.7 1220OAL = 1.250" No.5 9.7 1275

No.7 12.0 1305No.9 15.0 1341

HDY 180 XTP No.2 6.8 1120OAL = 1.250" No.5 8.7 1197

No.7 10.7 1183No.9 13.5 1242

SPR 190 FMJ No.2 7.2 1126OAL = 1.250" No.5 9.1 1186

No.7 11.2 1198No.9 14.2 1267

HDY 200 XTP No.2 6.3 1041OAL = 1.250" No.5 7.8 1066

No.7 9.8 1091No.9 12.5 1170

41 REMINGTON MAGNUMGun WILSONBarrel length 91⁄2"Primer CCI 300Case WIN


No.7 14.5 1442No.9 18.0 1582

SRA 170 JHP No.2 10.0 1451OAL = 1.565" No.5 12.0 1493

No.7 15.5 1555No.9 19.7 1705

HDY 210 XTP No.2 9.5 1245OAL = 1.570" No.5 11.5 1322


41 REMINGTON MAGNUM (CONTINUED)Maximum Loads

Bullet Powder Grains Vel.No.7 14.2 1379No.9 18.0 1521

44 SPECIALGun DOUGLASBarrel length 71⁄2"Primer CCI 300Case WIN

Maximum LoadsBullet Powder Grains Vel.(L) 245 RN N100 3.8 752OAL = 1.600" S1000 4.5 791

No.2 4.7 819No.5 6.8 860

IMI 240 JHP N100 3.8 583OAL = 1.485" S1000 4.0 587

No.2 4.5 604No.5 6.5 730

44 REMINGTON MAGNUMGun RUGER REDHAWKBarrel length 71⁄2"Primer CCI 300Case WIN


No.7 17.5 1458No.9 21.7 1550

(L) 300 SSK No.2 9.5 1138OAL = 1.720" No.5 11.6 1140

No.7 15.0 1245No.9 18.5 1320

HDY 180 JHP No.2 11.1 1444OAL = 1.560" No.5 16.4 1615

No.7 20.5 1707No.9 NR

NOS 200 JHP No.2 11.0 1342OAL = 1.595" No.5 15.8 1532

No.7 18.7 1538No.9 25.0 1676

IMI 240 JHP No.2 10.0 1250OAL = 1.560" No.5 14.4 1383

No.7 17.3 1415No.9 21.3 1500

HDY 300 XTP No.2 9.8 1108OAL = 1.595" No.5 13.0 1220

No.7 14.5 1190No.9 17.7 1274

HANDGUN


HANDGUN

HANDGUN DATA 18 HANDGUN DATA45 ACPGun 1911A1Barrel length 5"Primer REM 21⁄2


Bullet Powder Grains Vel.(L) 155 SWC N100 5.5 1087OAL = 1.240" S1000 6.5 1170

No.2 7.5 1204No.5 10.0 1189

(L) 170 SWC N100 5.2 1082OAL = 1.130" S1000 5.9 1059

No.2 6.5 1079No.5 9.0 1074

(L) 200 SWC N100 4.9 938OAL = 1.190" S1000 5.3 952

No.2 5.8 939No.5 8.7 1025

(L) 230 RN N100 4.5 834OAL = 1.230" S1000 5.1 898

No.2 5.6 870No.5 8.5 968

HDY 185 XTP N100 5.3 957OAL = 1.210" S1000 5.8 993

No.2 7.5 1077No.5 10.2 1102

HDY 200 XTP N100 4.8 873OAL = 1.225" S1000 5.8 914

No.2 6.5 963No.5 9.7 1050

SRA 230 FMJ N100 4.5 825OAL = 1.250" S1000 5.5 848

No.2 6.1 874No.5 8.7 927

45 COLTGun DOUGLASBarrel length 71⁄2"Primer CCI 300Case WIN

Maximum LoadsBullet Powder Grains Vel.(L) 225 FN N100 5.9 897OAL = 1.620" S1000 6.5 909

No.2 6.1 873No.5 12.1 1033

(L) 240 SWC N100 5.7 898OAL = 1.570" S1000 6.3 851

No.2 6.0 845No.5 11.3 998

(L) 255 SWC N100 5.5 868OAL = 1.600" S1000 5.8 807

No.2 5.9 813No.5 10.4 961

SRA 185 JHP N100 6.8 993OAL = 1.575" S1000 7.6 1027

No.5 12.0 1075WARNING: Reduce listed load by 10% for a start charge.(*) Do not exceed start charge if Winchester small pistol magnum primers are used.

45 COLT (CONTINUED)Maximum Loads

Bullet Powder Grains Vel.HDY 200 XTP N100 6.4 954OAL = 1.595" S1000 7.0 932

No.5 11.5 1032HDY 230 XTP N100 5.7 843OAL = 1.595" S1000 6.3 800

No.5 11.0 969SRA 240 JHP N100 5.6 838OAL = 1.590" S1000 6.0 776

No.5 10.5 970HDY 250 XTP N100 5.5 757OAL = 1.570" S1000 5.8 750

No.5 11.0 800SPR 260 JHP N100 5.3 729OAL = 1.600" S1000 5.8 695

No.5 10.5 762

454 CASULLGun TEST BARRELBarrel length 71⁄2"Primer CCI 400Case FA

Maximum LoadsBullet Powder Grains Vel.SRA 240 JHP No.9 28.0 1753OAL = 1.705" 1680 36.0 1702HDY 250 XTP No.9 28.0 1770OAL = 1.700" 1680 37.0 1758SPR 260 JHP No.9 26.8 1657OAL = 1.710" 1680 35.0 1646SPR 300 JSP No.9 26.0 1596OAL = 1.765" 1680 33.5 1591HDY 300 XTP No.9 26.0 1623OAL = 1.765" 1680 33.5 1594FA 240 JHP No.9 31.0 1916OAL = 1.780" 1680 38.0 1769FA 260 JFP No.9 30.0 1835OAL = 1.765" 1680 38.5 1780FA 300 JFP No.9 25.0 1575OAL = 1.755" 1680 34.5 1622

50 ACTION EXPRESSGun DESERT EAGLEBarrel length 6"Primer CCI 350Case SPR

Maximum LoadsBullet Powder Grains Vel.SPR 325 U-C No.9 23.8 1247OAL = 1.575" 1680 37.8 1305


COWBOY ACTION DATA 19 COWBOY ACTION DATA

COWBOY ACTION SHOOTINGThis relatively new shooting sport is enjoying ever increasing popularity. As the name implies, cowboy

action shooting involves a less formal (read, more fun) combination of rifle, shotgun and handgun competi-tion. Typically both male and female participants don Old West-style costumes and use original or replicablackpowder-style firearms. Cowboy action shooting has had a definite impact on the world of shootingand reloading.

From our viewpoint as a propellant supplier the resurgence of several old, originally black powder,cartridges created a challenging situation. Firearms made during the original cowboy era fired cartridgesdesigned for black powder, which was the only propellant available 125 years ago. These older cartridgespresent a special set of problems when loaded with modern smokeless propellants. They are of a relativelyhigh case capacity, even with modern solid head case design, because they were originally developed touse black powder. We are also restricted to low chamber pressures because of the firearms that they arechambered in. Even modern replicas, made of newer and better steels, are still true to the original designsand the low pressure limits must still be observed in the interest of shooter safety and longevity of thefirearm. Those firearms originally built for black powder are probably best loaded with black powder, asthe steel used then is inferior to that used in later production and the current replicas.

As we developed data for these cartridges we paid particular attention to propellant selection inbalancing the large case capacity with the low pressure limit in order to achieve consistent ignition andgood accuracy. The sport of Cowboy Shooting emphasizes low velocity and low recoil loads. These aredesirable from the standpoint of shooter safety since the targets are steel and the ranges short. The lowrecoil reduces shooter fatigue and allows a quicker recovery time between shots during competition. Theselow velocity loads are quite sufficient to the task of knocking over target plates.

The following loads are tailored to meet the needs of the modern ‘‘Cowboy Action Shooter.’’ Theyshould be used exactly as shown with no reductions in charge weight. Bullet weight and type should beas closely matched as is feasible, as should the overall length of the loaded round. Care must be exercisedto match the bullet diameter to the inside diameter of the cylinder throat. Undersize bullets will NOTperform well. They allow the already low gas pressure to flow past the base of the bullet and along thesides. This gas flow vaporizes lead from the bullet surface and deposits it in the cylinder and barrel makingthe gun harder to clean and usually deteriorating accuracy. The gas loss also reduces the pressure reachedand results in poor ignition, lower velocity and more residue from the propellant combustion. It is also veryimportant to have a high bullet pull. A tight fit between the case mouth and the bullet greatly aids ignition.Low bullet pull can and usually does ruin an otherwise excellent load.

Cowboy Action loads operate at pressures that are not compatible with many modern propellants.The propellants from the Accurate and Scot product line used in developing this data have proven suitablefor the loads listed, but your favorite propellant may not necessarily work in every cartridge you mightwish. Because of the low charge weight most of these cartridges could hold a double charge ofpropellant, perhaps more. It behooves the loader, therefore, to exercise caution and rigorously inspecthis ammunition throughout the loading process to ensure that this doesn’t happen. DO NOT ASSUME ITCAN’T HAPPEN TO YOU—IT CAN! We here in the customer service department at Accurate ArmsCompany hope that you, the shooter, will find this data of value in pursuing your favorite pastime. If youhave any questions or comments please don’t hesitate to call us at 1-800-416-3006, Monday throughFriday, 8:00 am – 4:30 pm, central time.

COWBOY


COWBOY


HANDGUN LOADS32/20 WINCHESTERGun RUGERBarrel length 61⁄2"Primer CCI 400Case REM

Maximum LoadsBullet Powder Grains Vel.(L) 100 SWC No. 5 4.8 865OAL = 1.585" No. 7 6.1 924

No. 9 7.0 924

38 SPECIALGun H.S. Precision/

S&W Model 14Barrel length 83⁄8"Primer CCI 500Case HDY

Maximum LoadsBullet Powder Grains Vel.(L) 130 SWC N100 3.3 949OAL = 1.420" S1000 3.4 913

No. 2 IMP N/RNo. 5 N/R

(L) 158 SWC N100 3.3 898OAL = 1.481" S1000 3.4 857

No. 2 IMP 4.0 868No. 5 5.9 940

357 MAGNUMGun S&WBarrel length 6"Primer CCI 500Case HDY

Maximum LoadsBullet Powder Grains Vel.(L) 148 DEWC No. 2 IMP 3.0 746OAL = 1.370" 4.0 919(L) 148 HBWC No. 2 IMP 2.5 645OAL = 1.320" 4.0 913(L) 158 SWC* No. 2 IMP 4.0 864OAL = 1.510" 5.0 1008

*Note: SWC seated with front driving band flush with case mouth (357 Magnum and 44 Magnum).

38/40 WINCHESTERGun RUGERBarrel length 61⁄2"Primer WLPCase WIN

Maximum LoadsBullet Powder Grains Vel.(L) 145 FP N100 5.8 1027OAL = 1.580" No. 2 IMP 5.8 1016(L) 165 FP N100 5.2 959OAL = 1.580" No. 2 IMP 5.4 946(L) 185 FP N100 5.0 885OAL = 1.580" No. 2 IMP 5.0 871(L) 200 FP N100 4.8 836OAL = 1.580" No. 2 IMP 4.8 815

44/40 WINCHESTERGun TEST BBLBarrel length 71⁄2"Primer REM 21⁄2"Case REM

Maximum LoadsBullet Powder Grains Vel.(L) 190 WC N100 4.6 861OAL = 1.390" S1000 4.9 860

No. 2 IMP 5.2 891No. 5 8.5 950

(L) 200 SWC N100 5.3 954OAL = 1.575" S1000 5.7 929

No. 2 IMP 6.3 961No. 5 9.2 983

.44 RUSSIANGun TEST BBLBarrel length 71⁄2"Primer CCI 300Case STARLINE

Maximum LoadsBullet Powder Grains Vel.(L) 200 FN N100 4.0 873OAL = 1.240" S1000 4.6 923

No. 2 4.8 939No. 5 7.5 9175744 13.0 919

(L) 240 SWC N100 3.3 769OAL = 1.280" S1000 3.7 781

No. 2 4.2 824No. 5 6.6 8145744 11.5 824


COWBOY ACTION DATA 21 COWBOY ACTION DATA44 S&W SPECIALGun TEST BBLBarrel length 71⁄2"Primer CCI 300Case MIDWAY


No. 2 IMP 4.0 836No. 5 6.7 871

(L) 200 SWC N100 4.1 867OAL = 1.465" S1000 4.3 813

No. 2 IMP 5.2 905No. 5 7.4 959

(L) 245 RN N100 3.8 752OAL = 1.600" S1000 4.5 791

No. 2 IMP 4.7 819No. 5 6.8 860

(L) 250 SWC N100 4.2 772OAL = 1.575" S1000 4.3 751

No. 2 IMP 5.0 808No. 5 7.0 864

44 REMINGTON MAGNUMGun TEST BBLBarrel length 71⁄2"Primer CCI 300Case WIN


No. 2 IMP 5.5 955No. 5 8.0 951

(L) 200 SWC* N100 4.7 911OAL = 1.575" S1000 5.0 928

No. 2 IMP 5.0 885No. 5 7.6 880

(L) 250 SWC* N100 4.5 826OAL = 1.620" S1000 5.0 809

No. 2 IMP 5.0 838No. 5 7.0 812

*Note: SWC seated with front driving band flush with case mouth (357 Magnum and 44 Magnum).

45 S&W–SCHOFIELDGun TEST BBLBarrel length 71⁄2"Primer CCI 300Case STARLINE

Maximum LoadsBullet Powder Grains Vel.(L) 200 SWC N100 5.6 959OAL = 1.450" S1000 6.3 952

No. 2 IMP 5.6 863(L) 230 RN N100 5.0 867OAL = 1.450" S1000 5.8 852

No. 2 IMP 5.3 870(L) 255 SWC N100 4.6 775OAL = 1.450" S1000 5.5 801

No. 2 IMP 5.1 783

45 COLTGun TEST BBLBarrel length 71⁄2"Primer CCI 300Case WIN


No. 2 IMP 6.4 952(L) 225 FN N100 5.9 897OAL = 1.595" S1000 6.5 909

No. 2 IMP 6.1 873(L) 240 SWC N100 5.7 898OAL = 1.660" S1000 6.3 851

No. 2 IMP 6.0 845(L) 250/255 FN N100 5.5 868OAL = 1.600" S1000 5.8 807

No. 2 IMP 5.9 813

TECH LINE: 1-800-416-3006

COWBOY


COWBOY


LONG RANGE RIFLE LOADS

.30-30 WINCHESTERGun TEST BARRELBarrel length 24"Primer CCI 200Case REM

Maximum LoadsBullet Powder Grains Vel.(L) LY 160 PBFN 5744 12.6 1297OAL = 2.550"

.32-40 WINCHESTERGun TEST BARRELBarrel length 24"Primer CCI 200Case REM


.38-55 WINCHESTERGun TEST BARRELBarrel length 24"Primer CCI 200Case WIN


SHOTSHELL LOADS(See Shotshell Section)

.45-70 GOVERNMENTGun TEST BARRELBarrel length 24"Primer CCI 200Case REM NICKEL

Maximum LoadsBullet Powder Grains Vel.(L) CLE 300 PB 5744 31.0 1597OAL = 2.550"(L) CLE 405 PB 5744 27.5 1355OAL = 2.560"(L) LY 500 PBRN 5744 25.0 1209OAL = 2.850"

NOTE: Crimp bullets firmly.


XMP-5744 HANDGUN DATA 23 XMP-5744 HANDGUN DATA

XMP-5744Our XMP-5744 has proven to be an extraordinary powder! XMP-5744 is a short cut, extruded, double

base rifle propellant. Its burn rate is between our No. 9 and 1680. XMP-5744 is not intended to set newvelocity records. What it will do, however, is allow you to shoot reduced loads, without fillers, in just aboutany cartridge, especially the older, low pressure, rifle cartridges. IHMSA shooters take note, it is also usefulin large capacity handgun cartridges.

XMP-5744 has some very specific design criteria. First, it is double base with a high percentage ofNitroglycerin. This gives the propellant a high energy content. It also promotes consistent ignition evenwith low volume powder charges in the large capacity ‘‘old timers’’ such as the 50 Sharps. In fact, the 50Sharps was used in some of the development work for this propellant. Nitroglycerin contributes to excellentshelf life and reduces the effects of humidity and temperature.

Second, XMP-5744’s short length provides uniform metering so you can spend more time shootingand less weighing charges.

Third, XMP-5744 has a relatively low bulk density. This contributes to its ease of ignition. In fact,ease of ignition and consistent velocity, regardless of powder position in the case, are the two main criteriawe set in manufacturing new XMP-5744.

The following loads are considered maximum by the technical staff at Accurate and should notbe exceeded under any circumstances. Additional data may be obtained by calling our customer serviceline (800-416-3006) Monday thru Friday, from 8 AM until 4:30 PM Central Time.

MAXIMUM LOADS! REDUCE LISTED LOADS BY 10 PERCENT FOR START CHARGES!ALL XMP5744 LOADS MUST BE FIRMLY CRIMPED.

7mm T/CUGun DOUGLASBarrel length 14"Primer CCI 400Case REM

Maximum LoadsBullet Grains Vel. OAL(L) RCBS 145 SIL 20.0 1871 2.500"SRA 100 HP 23.0 2320 2.430"SPR 120 SP 22.0 2090 2.545"SPR 130 SP 20.5 1934 2.510"SRA 140 SBT 20.5 1938 2.540"NOS 150 BT 19.0 1772 2.575"HDY 162 BT 18.5 1690 2.640"REM 175 PSP 18.0 1623 2.495"

32/20 WINCHESTERGun BLACKHAWKBarrel length 61⁄2"Primer CCI 400Case REM

Maximum LoadsBullet Grains Vel. OAL(L) PEN 100 SWC 9.3 900 1.585"SRA 90 JHC 9.7 920 1.565"HDY 100 XTP 9.5 930 1.565"

WARNING: Reduce listed load by 10% for a start charge.

357 MAGNUMGun H-S PREC.Barrel length 10"Primer CCI 500Case HDY

Maximum LoadsBullet Grains Vel. OAL(L) LY 174 SWC 14.5 1361 1.660"(L) RCBS 180 SIL 13.0 1231 1.675"HDY 158 XTP 14.5 1368 1.580"HDY 180 XTP 13.0 1196 1.575"

357 REMINGTON MAXIMUMGun DOUGLASBarrel length 14"Primer CCI BR 4Case REM

Maximum LoadsBullet Grains Vel. OAL(L) LY 210 RNGC 17.0 1518 1.965"NOS 158 JHP 21.0 1825 1.905"SRA 170 SIL 20.5 1772 1.900"HDY 180 SSP 22.0 1781 2.190"SPR 200 TMJ 18.0 1497 1.990"

XMP-5744


XMP-5744

XMP-5744 HANDGUN DATA 24 XMP-5744 HANDGUN DATA38/40 WINCHESTERGun ROCKBarrel length 61⁄2"Primer WLPCase WIN

Maximum LoadsBullet Grains Vel. OAL(L) COL 155 RN 16.5 1013 1.585"(L) COL 185 FN 14.5 900 1.580"SRA 150 JHC 17.5 1039 1.575"SRA 180 JHC 16.5 961 1.585"

41 REMINGTON MAGNUMGun DOUGLASBarrel length 91⁄2"Primer CCI 300Case WIN

Maximum LoadsBullet Grains Vel. OAL(L) PEN 210 SWC 21.5 1431 1.675"(L) PEN 240 RN 20.0 1334 1.710"SRA 170 JHC 24.0 1577 1.565"SPR 200 HP 22.0 1424 1.600"HDY 210 XTP 20.5 1326 1.570"SRA 220 SIL 20.0 1311 1.560"

44 S&W SPECIALGun DOUGLASBarrel length 71⁄2"Primer CCI 300Case MIDWAY

Maximum LoadsBullet Grains Vel. OAL(L) LY 250 SWC 12.5 737 1.575"

44/40 WINCHESTERGun DOUGLASBarrel length 71⁄2"Primer CCI 300Case REM

Maximum LoadsBullet Grains Vel. OAL(L) WY 200 FN 17.0 1035 1.580"


44 REMINGTON MAGNUMGun REDHAWKBarrel length 71⁄2"Primer CCI 300Case WIN

Maximum LoadsBullet Grains Vel. OAL(L) LY 240 SWC 24.0 1446 1.560"(L) LY 325 SWC 18.0 1082 1.690"HDY 240 XTP 24.0 1413 1.580"HDY 300 XTP 20.0 1191 1.595"

45 COLTGun H-S PREC.Barrel length 71⁄2"Primer CCI 300Case WIN

Maximum LoadsBullet Grains Vel. OAL(L) CLE 240 SWC 18.5 959 1.575"(L) LY 255 SWC 17.8 860 1.600"SRA 185 JHC 20.5 1078 1.575"HDY 230 XTP 18.5 949 1.570"SRA 240 JHC 18.5 960 1.590"HDY 250 XTP 18.0 929 1.570"

454 CASULLGun H-S PREC.Barrel length 71⁄2"Primer CCI 400Case FA

Maximum LoadsBullet Grains Vel. OALSRA 240 JHC 35.0 1693 1.700"HDY 250 XTP 34.0 1726 1.695"SPR 260 JHP 34.0 1688 1.710"HDY 300 XTP 32.0 1570 1.765"FA 240 JHP 37.0 1811 1.780"FA 260 JFP 36.0 1749 1.765"FA 300 JFP 32.0 1564 1.760"

TECH LINE: 1-800-416-3006


XMP-5744 RIFLE DATA 25 XMP-5744 RIFLE DATA22 HORNETGun DOUGLASBarrel length 24"Primer CCI 500Case WIN

Maximum LoadsBullet Grains Vel. OAL(L) PEN 44 RNGC 9.0 2042 1.665"NOS 40 BT 9.2 2092 1.855"SRA 40 HOR 9.7 2208 1.715"HDY 50 SX 9.0 1951 1.780"

22 BR REMINGTONGun DOUGLASBarrel length 26"Primer REM 71⁄2


Bullet Grains Vel. OALNOS 40 BT 26.5 3843 2.055"SPR 50 TNT 26.0 3563 2.030"HDY 53 HP 25.0 3443 1.990"NOS 55 SBT 24.5 3335 2.005"HDY 60 HP 24.0 3211 2.020"

25/06 REMINGTONGun WISEMANBarrel length 24"Primer CCI 250Case REM

Maximum LoadsBullet Grains Vel. OAL(L) PEN 100 22.0 2072 2.950"FNGC

25/20 WINCHESTERGun DOUGLASBarrel length 24"Primer CCI 400Case REM

Maximum LoadsBullet Grains Vel. OAL(L) PEN 65 FN 11.0 1874 1.592"(L) PEN 90 FN 10.0 1675 1.615"HDY 60 FP 11.4 1953 1.592"SPR 75 FN 11.2 1850 1.585"


260 REMINGTONGun HS PRECISIONBarrel length 24"Primer REM 91⁄2


Bullet Grains Vel. OALSRA 85 HP 20.0 2160 2.670"

33.0 3214 2.670"

.270 WINCHESTERGun HS PRECISIONBarrel length 24"Primer REM 91⁄2


Bullet Grains Vel. OALSRA 90 HP 24.0 2174 3.090"

40.0 3270 3.090"NOS 130 BT 24.5 2020 3.330"

36.5 2748 3.330"SRA 150 SBT 26.0 2068 3.300"

35.5 2606 3.300"

7mm 08 REMINGTONGun DOUGLASBarrel length 24"Primer CCI 200Case REM

Maximum LoadsBullet Grains Vel. OAL(L) LY 145 GC 27.0 2294 2.670"(L) PEN 168 GC 27.0 2174 2.735"

7mm REM MAGGun OBERMEYERBarrel length 24"Primer CCI 250Case REM

Maximum LoadsBullet Grains Vel. OALSPR 120 SP 24.5 2041 3.260"

47.0 3127 3.260"SRA 140 SBT 27.5 2050 3.270"

45.5 2948 3.270"NOS 175 SP 31.5 2042 3,275"

41.5 2513 3.275"

XMP-5744


XMP-5744

XMP-5744 RIFLE DATA 26 XMP-5744 RIFLE DATA30 M1 CARBINEGun DOUGLASBarrel length 20"Primer CCI 400Case REM

Maximum LoadsBullet Grains Vel. OAL(L) LY 125 RN 13.5 1711 1.705"SPR 100 PL 15.0 1846 1.675"SPR 110 FMJ 14.5 1787 1.670"

30/30 WINCHESTERGun H-S PREC.Barrel length 20"Primer CCI 200Case FED

Maximum LoadsBullet Grains Vel. OAL(L) LY 152 RNGC 22.5 2112 2.450"(L) LY 173 FNGC 22.0 2035 2.550"SPR 150 FN 23.5 2060 2.540"

25.0 2158 2.540"SRA 170 FN 23.5 1998 2.545"

30/40 KRAGGun DOUGLASBarrel length 24"Primer CCI 200Case REM

Maximum LoadsBullet Grains Vel. OAL(L) LY 165 FNGC 28.0 2198 2.855"(L) LY 180 RNGC 26.5 2086 2.900"(L) LY 210 RNGC 25.0 1870 2.925"

308 WINCHESTERGun H-S PREC.Barrel length 24"Primer CCI 200Case REM

Maximum LoadsBullet Grains Vel. OAL(L) LY 152 RNGC 27.0 2230 2.530"(L) RCBS 165 SIL 27.0 2165 2.700"SRA 110 HP 23.5 2040 2.595"

36.0 2918 2.595"HDY 150 SP 27.0 2160 2.745"

33.5 2551 2.745"NOS 180 BT 28.0 2117 2.800"

30.0 2235 2.800"SRA 190 HPBT 28.0 2091 2.800"

30.0 2221 2.800"WARNING: Reduce listed load by 10% for a start charge.

30/06 SPRINGFIELDGun H-S PREC.Barrel length 24"Primer CCI 200Case IMI

Maximum LoadsBullet Grains Vel. OAL(L) LY 152 RNGC 33.5 2451 3.035"(L) LY 180 RNGC 32.0 2337 3.015"(L) LY 210 RNGC 30.0 2021 3.195"SRA 125 SP 26.0 2046 3.150"

42.5 3037 3.150"REM 150 PSPCL 28.0 2058 3.250"

41.0 2787 3.250"SRA 168 HPBT 29.0 2106 3.295"

38.5 2621 3.295"SRA 180 HPBT 29.5 2083 3.290"

37.0 2486 3.290"SRA 220 RN 32.5 2058 3.200"

35.5 2210 3.200"

.300 REMINGTON ULTRA MAGGun UNIVERSAL RECEIVERBarrel length WISEMAN/24"Primer REM 91⁄2 MCase REM

Maximum LoadsBullet Grains Vel. OAL(L) LY 165 RNGC 25.0 1636 3.380"

35.0 2090 3.380"(L) LY 168 RNGC 25.0 1540 3.475"(L) LY 180 RNGC 25.0 1604 3.400"

38.0 2161 3.400"NOS 125 BT 45.0 2650 3.600"

67.0 3578 3.600"BAR 150X 40.0 2340 3.600"

62.0 3216 3.600"NOS 165 BT 39.0 2215 3.600"

61.0 3092 3.600"SPR 165 GS 40.0 2277 3.550"

61.0 3062 3.550"SWF 165 A-F 38.0 2184 3.550"

60.0 3044 3.550"HDY 168 HPBT 38.0 2185 3.600"

61.0 3072 3.600"HDY 180 SPBT 38.0 2151 3.600"

59.0 2937 3.600"REM 180 PSPCL 47.0 2454 3.550"

60.0 2942 3.550"


XMP-5744 RIFLE DATA 27 XMP-5744 RIFLE DATA.300 REMINGTON ULTRA MAG (CONTINUED)

Maximum LoadsBullet Grains Vel. OALSPR 180 GS 38.0 2134 3.550"

58.0 2882 3.550"SWF 180 A-F 38.0 2111 3.550"

59.0 2939 3.550"NOS 180 BT 38.0 2152 3.600"

58.0 2903 3.600"NOS 180 PART 38.0 2118 3.600"

58.0 2892 3.600"BARNES 180 X 38.0 2063 3.600"

58.0 2876 3.600"SPR 200 SP 38.0 2014 3.600"

56.0 2689 3.600"SPR 200 GS 38.0 2043 3.550"

56.0 2772 3.550"SWIFT 200 A-F 38.0 2024 3.550"

56.0 2731 3.550"SRA 220 RN 38.0 1921 3.570"

57.0 2615 3.570"

.300 WINCHESTER MAGNUMGun HS PRECISIONBarrel length 24"Primer CCI 200Case REM

Maximum LoadsBullet Grains Vel. OALSRA 150 SP 32.0 2091 3.380"

52.0 3030 3.380"SPR 180 GS 34.0 2097 3.315"

49.0 2778 3.315"SRA 220 HPBT 37.0 2111 3.300"

46.0 2497 3.300"

32/20 WINCHESTER*Gun MARLINBarrel length 22"Primer CCI 400Case REM

Maximum LoadsBullet Grains Vel. OAL(L) LY 100 SWC 9.3 1203 1.545"SRA 90 JHC 9.7 1221 1.565"HDY 100 XTP 9.5 1233 1.585"

*Loads for Model 1873 Winchester


7.62x39mmGun H-S PREC.Barrel length 20"Primer REM 91⁄2

Case IMIMaximum Loads

Bullet Grains Vel. OALSPR 100 RN 23.0 2374 1.950"SRA 110 HP 22.5 2294 2.115"SPR 125 SP 21.5 2145 2.195"HDY 130 SSP 20.5 2051 2.180"SRA 150 SP 19.5 1900 2.180"*HDY 123 SP 22.0 2245 2.175"

*Bullet .310" Diameter

303 BRITISHGun DOUGLASBarrel length 24"Primer CCI 250Case REM

Maximum LoadsBullet Grains Vel. OAL(L) PEN 180 RNGC 28.0 2159 2.930"SPR 125 SP 32.5 2660 2.870"HDY 150 SP 31.0 2413 3.010"SRA 180 SP 29.0 2189 3.000"

32/40 WINCHESTERGun DOUGLASBarrel length 24"Primer REM 91⁄2


Bullet Grains Vel. OAL(L) LY 170 FNGC 20.0 1802 2.495"HDY 170 FN 20.0 1777 2.575"

32/40 SCHUETZENGun DOUGLASBarrel length 24"Primer REM 21⁄2


Bullet Grains Vel. OAL(L) SAECO 11.0 1043 N/A200 FN 12.5 1138 N/ABREECH 14.0 1243 N/ASEATED 15.5 1345 N/A

TECH LINE: 1-800-416-3006

XMP-5744


XMP-5744

XMP-5744 RIFLE DATA 28 XMP-5744 RIFLE DATA.338 REMINGTON ULTRA MAGGun WISEMANBarrel length 24"Primer REM 91⁄2 MCase REM

Maximum LoadsBullet Grains Vel. OAL(L) PEN 193 FPGC 25.0 1595 3.310"

40.0 2185 3.310"HDY 200 SP 40.0 2123 3.575"HDY 225 SP 40.0 2083 3.575"SRA 250 SPBT 42.0 2113 3.575"SWF 275 AF 44.0 2082 3.490"

.338 WINCHESTER MAGNUMGun HS PRECISIONBarrel length 24"Primer CCI 250Case FED

Maximum LoadsBullet Grains Vel. OAL(L) PEN 200 FNGC 28.0 1815 3.200"

38.0 2302 3.200"HDY 200 SP 36.0 2061 3.335"

52.0 2790 3.335"SRA 250 SBT 38.0 2056 3.340"

47.0 2466 3.340"SWF 275 SP 40.0 2038 3.240"

44.0 2203 3.240"

35 WHELENGun DOUGLASBarrel length 24"Primer CCI 200Case REM

Maximum LoadsBullet Grains Vel. OAL(L) LY 205 RNGC 38.0 2452 3.045"(L) RCBS 250 SIL 36.0 2173 3.250"(L) LY 280 RNGC 34.0 2015 3.050"

38/55 WINCHESTERGun DOUGLASBarrel length 24"Primer CCI 200Case WIN

Maximum LoadsBullet Grains Vel. OAL(L) SAECO 240 FN 22.0 1601 2.510"SRA 200 FN 25.5 1853 2.590"HDY 220 FN 23.5 1648 2.580"


40/65 WINCHESTERGun C. SHARPSBarrel length 36"Primer WIN WLRCase WIN

Maximum LoadsBullet Grains Vel. OAL(L) RCBS 260 FN 26.0 1651 2.540"(L) RCBS 300 FN 24.0 1515 2.580"(L) RCBS 300 SP 24.0 1521 2.660"(L) RCBS 350 SP 23.0 1436 2.660"(L) RCBS 400 SP 23.0 1364 2.830"

416 RIGBYGun DOUGLASBarrel length 26"Primer FED 215Case FED

Maximum LoadsBullet Grains Vel. OAL(L) RCBS 350 FN 55.0 2173 3.480"

416 REMINGTON MAGNUMGun DOUGLASBarrel length 24"Primer REM 91⁄2MCase REM

Maximum LoadsBullet Grains Vel. OAL(L) RCBS 350 FN 55.0 2267 3.430"

444 MARLINGun DOUGLASBarrel length 24"Primer REM 91⁄2


Bullet Grains Vel. OAL(L) PEN 200 FN 38.0 2225 2.560"(L) LY 240 SWC 36.0 2051 2.570"HDY 200 XTP 40.0 2297 2.520"SRA 240 JHC 37.0 2069 2.520"HDY 265 FP 35.0 1923 2.570"

TECH LINE: 1-800-416-3006


XMP-5744 RIFLE DATA 29 XMP-5744 RIFLE DATA.450 MARLINGun DOUGLASBarrel length 24"Primer CCI 250Case REM

Maximum LoadsBullet Grains Vel. OAL(L) CLE 305 RNFP 43.0 2096 2.480"(L) CLE 405 RNFP 40.0 1865 2.550"SRA 300 FNHP 48.0 2211 2.550"SPR 350 FNHP 43.8 1971 2.550"SPR 400 FN 41.0 1835 2.550"

45/70 TRAP DOOR SPRINGFIELD—Level 1

Gun DOUGLASBarrel length 24"Primer REM 91⁄2

Case REM NICKELMaximum Loads

Bullet Grains Vel. OAL(L) CLE 300 PB 31.0 1597 2.550"(L) CLE 405 PB 27.5 1355 2.560"(L) LY 500 PBRN 25.0 1209 2.850"(L) LY 500 SCHM 25.3 1219 3.010"(L) LY 530 POST 22.4 1178 2.950"SPR 400 JSP 26.0 1172 2.560"

45/70 (RUGER, MARLIN, SHARPS,WINCHESTER)—Level 2

Gun DOUGLASBarrel length 24"Primer WIN WLRCase REM NICKEL

Maximum LoadsBullet Grains Vel. OAL(L) CLE 300 PB 38.0 1877 2.550"(L) CLE 405 PB 33.0 1589 2.560"(L) LY 500 SCHM 31.5 1456 3.010"(L) LY 530 POST 29.5 1360 2.950"SRA 300 HP 35.0 1704 2.550"SPR 400 FN 31.0 1434 2.560"HDY 500 RNSP 31.0 1488 2.580"

45/90 WINCHESTERGun WISEMANBarrel length 30"Primer CCI 250Case BELL

Maximum LoadsBullet Grains Vel. OAL(L) CLE 300 PBFN 39.0 1779 2.810"(L) CLE 405 PBFN 35.0 1534 2.910"(L) LY 500 SCHM 32.5 1413 3.300"

WARNING: Reduce listed load by 10% for a start charge.Note: Use a firm crimp.

45/110 SHARPS 27⁄8"Gun WISEMANBarrel length 30"Primer CCI 250Case HDS

Maximum LoadsBullet Grains Vel. OAL(L) CLE 300 PBFN 44.0 1944 3.300"(L) CLE 405 PBFN 38.5 1616 3.350"(L) LY 500 SCHM 37.0 1522 3.750"

45/120 SHARPS 31⁄4"Gun WISEMANBarrel length 30"Primer CCI 250Case HDS

Maximum LoadsBullet Grains Vel. OAL(L) CLE 300 PB 43.0 1912 3.700"(L) CLE 405 PB 37.0 1570 3.815"(L) LY 500 PBRN 35.0 1447 4.000"(L) LY 570 JONES 34.0 1352 4.000"SPR 400 JSP 39.0 1535 3.700"

458 WINCHESTER MAGNUMGun DOUGLASBarrel length 24"Primer REM 91⁄2MCase REM

Maximum LoadsBullet Grains Vel. OAL(L) PEN 375 RN 52.0 2240 3.000"(L) PEN 400 FN 51.0 2170 3.000"(L) PEN 455 RN 49.0 2022 3.110"(L) PEN 500 RN 47.0 1901 3.170"

50/70 GOVERNMENTGun C. SHARPSBarrel length 30"Primer FED 215Case DGW

Maximum LoadsBullet Grains Vel. OAL(L) LY 425 SP 30.0 1419 2.275"(L) RCBS 550 FN 25.0 1208 2.200"

TECH LINE: 1-800-416-3006

XMP-5744


XMP-5744

XMP-5744 RIFLE DATA 30 XMP-5744 RIFLE DATA50/90 SHARPS 21⁄2"Gun C. SHARPSBarrel length 30"Primer FED 215Case ELDORADO

Maximum LoadsBullet Grains Vel. OAL(L) PEN 365 FN 43.0 1795 2.870"(L) LY 440 SP 38.0 1557 3.000"(L) RCBS 550 FN 35.0 1411 2.925"

50/140 SHARPS 31⁄4"Gun C. SHARPSBarrel length 30"Primer FED 215Case ELDORADO

Maximum LoadsBullet Grains Vel. OAL(L) LY 440 SP 55.0 1978 3.785"(L) RCBS 550 FN 50.0 1736 3.735"

WARNING: Reduce listed load by 10% for a start charge.Note: Use a firm crimp.


RIFLE DATA 31 RIFLE DATA

RIFLE DATAFOR MORE COMPLETE LOADING INFORMATION, BUY ACCURATE’S NEW

RELOADING MANUAL, BOOK TWO. SEE INSIDE BACK COVER FOR DETAILS.

17 REMINGTONGun DOUGLASBarrel length 24"Primer REM 71⁄2


Bullet Powder Grains Vel.HDY 25 HP 2230 21.5 3877OAL = 2.170" 2460 22.0 3965

2520 22.7 39734064 24.0 40452700 27.0 4083

22 HORNETGun DOUGLASBarrel length 24"Primer CCI 500*Case WW

Maximum LoadsBullet Powder Grains Vel.HDY 35 VMAX 1680 13.5 2860OAL = 1.775"SRA 40 HOR 1680 14.0 2785OAL = 1.715" 2015 12.5 2002NOS 45 HOR 1680 12.3 2493OAL = 1.720" 2015 12.5 2078

*A small pistol primer is used to improve loaduniformity on this small cartridge.

CAUTION—This loading data was developed inWinchester brass. RWS, Sako, and Norma brass haveless capacity, so reduce charge weights accordingly.

222 REMINGTONGun DOUGLASBarrel length 24"Primer REM 71⁄2

Case REM/WINMaximum Loads

Bullet Powder Grains Vel.NOS 45 SB 1680 21.0 3297OAL = 2.065" 2015 24.5 3384

2230 27.0 34472460 27.0 34052520 25.0 3156

WARNING: Reduce listed load by 10% for a start charge.*Denotes a compressed load.

222 REMINGTON (CONTINUED)Maximum Loads

Bullet Powder Grains Vel.HDY 50 SX 1680 18.5 3009OAL = 2.150" 2015 23.5 3208

2230 24.5 32272460 24.5 32042520 25.0 3081

NOS 55 SBT 1680 19.0 2896OAL = 2.155" 2015 22.5 3047

2230 24.5 31062460 24.5 30912520 24.5 2962

223 REMINGTONGun WILSONBarrel length 24"Primer REM 71⁄2


Bullet Powder Grains Vel.HDY 35 VMAX 1680 21.5 3677OAL = 2.130" 5744 22.0 3675

2015 26.0 38142230 29.5 3945

NOS 45 SP 1680 20.5 3302OAL = 2.115" 2015 26.0 3546

2230 27.0 34562460 27.5 34762495 26.5* 34352520 28.5* 3424

SPR 50 TNT 1680 20.5 3146OAL = 2.235" 2015 25.5 3387

2230 26.0 33422460 26.0 33292495 26.5 32822520 28.5 3346

HDY 53 HPBT 1680 20.0 3047OAL = 2.225" 2015 24.5 3268

2230 26.0 32522460 25.5 32342495 26.0 32662520 27.5 3235

NOS 55 SBT 1680 20.5 3058OAL = 2.230" 2015 25.0 3281

2230 26.0 3216

RIFLE


RIFLE

RIFLE DATA 32 RIFLE DATA223 REMINGTON (CONTINUED)

Maximum LoadsBullet Powder Grains Vel.

2460 26.5 32312495 26.2 32712520 27.5 3224

SRA 69 HPBT 2015 23.0 2917OAL = 2.250" 2230 24.5 2929

2460 24.7 29912495 25.0 29642520 27.0 3044

NOTE: Some military cases are much heavier thancommercial brass cases and may require reduction ofcharge weight by 8-12%. Use extra caution whenloading with military brass.

22 PPCGun DOUGLASBarrel length 24"Primer REM 71⁄2

Case SAKOMaximum Loads

Bullet Powder Grains Vel.SPR 50 HP 2015 26.0 3462OAL = 2.000" 2230 29.0 3617

2460 29.0 35772495 28.0 35032520 29.0 3466

HDY 53 HP 2015 25.5 3374OAL = 1.975" 2230 28.5 3498

2460 29.0 35312495 28.0 35042520 29.0 3431

NOS 55 SBT 2015 25.0 3278OAL = 1.960" 2230 28.0 3404

2460 28.0 33642495 27.6 34212520 29.0 3366

22 BR REMINGTONGun DOUGLASBarrel length 26"Primer REM 71⁄2


Bullet Powder Grains Vel.SPR 50 TNT 2015 30.5 3729OAL = 2.000" 2230 33.3 3765

2460 33.5 37622495 32.0 35592520 33.7 37512700 35.0 3476


22 BR REMINGTON (CONTINUED)Maximum Loads

Bullet Powder Grains Vel.HDY 53 HP 2015 29.5 3579OAL = 1.985" 2230 32.2 3617

2460 32.8 36532495 31.5 35412520 32.8 36202700 35.0 3310

NOS 55 SBT 2015 29.0 3490OAL = 1.970" 2230 32.0 3566

2460 32.5 36052495 31.0 34472520 32.7 35904064 32.5 35132700 34.0 3357

22/250 REMINGTONGun APEXBarrel length 24"Primer CCI 200Case REM

Maximum LoadsBullet Powder Grains Vel.NOS 50 SP 2015 34.0 3790OAL = 2.350" 2230 36.0 3800

2460 36.5 38312520 37.0 38194064 38.0 37964350 40.0 3531

HDY 53 HP 2015 33.5 3659OAL = 2.380" 2230 34.0 3584

2460 35.0 36292520 35.5 35994064 37.5 37674350 40.0 3505

NOS 55 SBT 2015 33.0 3598OAL = 2.370" 2230 35.0 3609

2460 36.0 36702520 36.0 36054064 37.0 36322700 40.0 36554350 40.0 3466

HDY 60 HP 2015 33.0 3497OAL = 2.400" 2230 34.0 3425

2460 35.0 34992520 36.0 35124064 36.0 35072700 38.0 34784350 40.0 3395

SPR 70 SSP 2015 30.0 3126OAL = 2.325" 2230 31.0 3091

2460 31.0 30772520 32.5 31444064 32.2 32202700 34.5 31214350 38.0 3244


RIFLE DATA 33 RIFLE DATA220 SWIFTGun RUGER 77VBarrel length 26"Primer FED 210Case WIN

Maximum LoadsBullet Powder Grains Vel.SPR 50 HP 4064 39.0 3843OAL = 2.700" 2700 45.0 4035

4350 44.0 39403100 44.0 3589

NOS 55 SBT 4064 37.0 3566OAL = 2.680" 2700 43.5 3832

4350 44.0 38963100 44.0 3588

HDY 60 HP 2700 42.0 3607OAL = 2.700" 4350 44.0 3820

3100 44.0 3528SRA 63 SP 2700 41.0 3717OAL = 2.660" 4350 41.5 3646

3100 44.0 3582SPR 70 SSR 2700 39.0 3435OAL = 2.660" 4350 41.5 3486

3100 44.0 3412

6mm PPCGun DOUGLASBarrel length 24"Primer REM 71⁄2

Case SAKOMaximum Loads

Bullet Powder Grains Vel.SRA 60 HP 2015 27.2 3163OAL = 2.050" 2230 29.5 3175

2460 30.0 32002495 28.5 3175

HDY 70 SX 2015 27.0 2957OAL = 2.080" 2230 28.5 2924

2460 29.5 29812495 28.5 3021

6mm BR REMINGTONGun DOUGLASBarrel length 24"Primer REM 71⁄2



2460 33.0 32752495 31.5 32622520 34.0 32832700 35.0 2949


6mm BR REMINGTON (CONTINUED)Maximum Loads

Bullet Powder Grains Vel.SPR 80 SP 2015 29.0 3044OAL = 2.120" 2230 31.0 3037

2460 32.0 31242495 30.0 30752520 33.0 31212700 35.0 2933

243 WINCHESTERGun H.S. PRECISIONBarrel length 24"Primer CCI 200Case WIN

Maximum LoadsBullet Powder Grains Vel.NOS 55 BT 2015 39.0 3731OAL = 2.605" 2230 41.5 3807

2460 43.0 38712520 43.5 38852700 48.5 38234350 47.5* 35163100 47.5* 3173

HDY 70 SX 2015 36.5 3395OAL = 2.650" 2495 39.0 3489

2520 39.0 33654064 42.0 34792700 45.0 34984350 48.0 35313100 48.0 3216

SPR 80 SP 2015 33.5 3121OAL = 2.700" 2495 36.0 3230

4064 37.0 31942700 42.0 32334350 44.0 33163100 47.0 3271

SRA 85 HPBT 2495 35.0 3072OAL = 2.660" 4064 38.0 3140

2700 41.0 31404350 44.0 32943100 46.0 3132

SPR 100 SBT 2495 30.0 2653OAL = 2.700" 4064 31.0 2644

2700 36.0 27534350 39.0 29813100 43.0 2966

TECH LINE: 1-800-416-3006

RIFLE


RIFLE

RIFLE DATA 34 RIFLE DATA6mm REMINGTONGun DOUGLASBarrel length 24"Primer CCI 200Case FED


4064 45.0 40312700 50.5 39154350 51.0* 37563100 51.0* 3381

HDY 70 SP 2015 40.8 3501OAL = 2.775" 2495 42.0 3568

4064 44.5 36774350 50.0 34283100 51.0 3187

SPR 80 SP 2015 38.8 3276OAL = 2.825" 2495 40.0 3280

4064 43.5 34852700 48.0 34164350 49.5 34063100 51.0 3186

NOS 100 SP 2015 36.5 2896OAL = 2.825" 4064 40.0 3070

2700 45.5 30594350 45.6 30413100 48.0 2981

250/3000 SAVAGEGun DOUGLASBarrel length 24"Primer REM 91⁄2



2460 34.0 31792520 34.0 31214064 36.0 31704350 41.0 30343100 41.0 2735

SRA 90 HPBT 2015 30.5 2929OAL = 2.465" 2230 32.0 2905

2460 32.0 28972520 32.5 29024064 35.0 29974350 40.0 29313100 41.0 2731

HDY 100 SP 2015 30.0 2792OAL = 2.500" 2230 30.0 2662

2460 31.0 2687WARNING: Reduce listed load by 10% for a start charge.*Denotes a compressed load.

250/3000 SAVAGE (CONTINUED)Maximum Loads

Bullet Powder Grains Vel.2520 32.0 27604064 35.0 28644350 39.0 27813100 41.0 2667

257 ROBERTSGun DOUGLASBarrel length 24"Primer CCI 200Case REM

Maximum LoadsBullet Powder Grains Vel.SRA 75 HP 2520 39.5 3169OAL = 2.745" 4064 42.3 3300

2700 46.0 32434350 47.0 32573100 51.0 3163

SRA 90 HPBT 2520 37.0 2947OAL = 2.735" 4064 40.5 3062

2700 42.0 29894350 45.0 30013100 50.0 3056

NOS 100 BT 2520 35.0 2745OAL = 2.785" 4064 38.0 2796

2700 41.0 28544350 44.5 28983100 49.0 2864

SRA 117 SBT 2520 34.0 2555OAL = 2.775" 2700 39.0 2619

4350 43.0 27003100 48.0 2736

25/06 REMINGTONGun WISEMANBarrel length 24"Primer CCI 250Case REM

Maximum LoadsBullet Powder Grains Vel.SRA 75 HP 2700 53.0 3753OAL = 3.065" 4350 59.0* 3780

3100 60.0* 3585SRA 90 HP 2700 50.0 3416OAL = 3.075" 4350 54.0 3472

3100 56.5* 3370NOS 100 BT 2700 48.0 3213OAL = 3.250" 4350 52.0 3273

3100 55.0* 32838700 65.0* 2843


RIFLE DATA 35 RIFLE DATA25/06 REMINGTON (CONTINUED)

Maximum LoadsBullet Powder Grains Vel.NOS 115 PART 2700 45.7 2949OAL = 3.195" 4350 49.5 3053

3100 52.8 30598700 64.0* 2803

SPR 120 SPBT 2700 45.0 2893OAL = 3.120" 4350 49.0 2942

3100 52.0 29788700 64.0* 2723

260 REMINGTONGun H.S. PRECISIONBarrel length 24"Primer REM 91⁄2



4350 48.0* 32243100 48.0* 2922

HDY 100 SP 4064 43.0 3168OAL = 2.750" 2700 47.0 3176

4350 49.0* 32663100 50.0* 3042

SWF 120 SP 4064 39.0 2817OAL = 2.710" 2700 43.0 2827

4350 45.5 29553100 47.5* 2849

HDY 129 SP 4064 38.0 2685OAL = 2.780" 2700 41.0 2689

4350 44.0 28333100 47.0* 2895

SWF 140 SP 4064 35.0 2494OAL = 2.740" 2700 39.0 2534

4350 41.5 26723100 45.0* 2640

SRA 140 SBT 4064 36.0 2501OAL = 2.750" 2700 39.0 2580

4350 43.5 27433100 46.0* 2678

HDY 140 SP 4064 36.5 2518OAL = 2.750" 2700 40.0 2581

4350 43.5 27423100 46.0* 2704

SRA 140 HPBT 4064 36.5 2569OAL = 2.775" 2700 40.0 2617

4350 43.0 27673100 46.0* 2735


6.5 x 55mm SWEDISHGun DOUGLASBarrel length 24"Primer CCI 200Case PMC

Maximum LoadsBullet Powder Grains Vel.(L) PEN 140 SPGC 5744 29.0 2371OAL = 3.020" 2495 33.0 2367

2520 34.0 23624064 38.0 24922700 41.0 25094350 44.0 25213100 47.0* 24768700 53.0* 2196

HDY 100 SP 2520 41.0 2965OAL = 2.975" 4064 44.0 3060

2700 48.0 30934350 48.0 29293100 49.0 2724

HDY 129 SP 2520 37.5 2558OAL = 3.025" 4064 41.5 2738

2700 43.0 26554350 46.0 27533100 49.0 2721

SPR 140 SP 2520 37.0 2502OAL = 3.000" 4064 40.0 2569

2700 42.0 25704350 45.0 26293100 47.0 25248700 53.0 2193

SRA 155 HPBT 4064 37.5 2388OAL = 3.090" 2700 38.0 2375

4350 42.5 25403100 46.0 25398700 53.0* 2413

270 WINCHESTERGun H.S. PRECISIONBarrel length 24"Primer REM 91⁄2


Bullet Powder Grains Vel.(L) 150 RCBS 8700 60.0 2374OAL = 3.250"SRA 90 HP 4064 53.0 3455OAL = 3.090" 2700 57.0 3452

4350 61.0 34843100 61.0 3127

HDY 100 SP 4064 52.0 3339OAL = 3.175" 2700 56.0 3340

4350 60.0 33563100 61.0 3100

RIFLE


RIFLE

RIFLE DATA 36 RIFLE DATA270 WINCHESTER (CONTINUED)

Maximum LoadsBullet Powder Grains Vel.SRA 110 SP 4064 51.0 3197OAL = 3.240" 2700 55.0 3232

4350 59.0 33003100 61.0 3128

NOS 130 BT 4064 48.0 2920OAL = 3.330" 2700 52.0 2954

4350 55.0 30203100 61.0 3065

HDY 140 SBT 2700 52.0 2893OAL = 3.330" 4350 56.0 2988

3100 60.0 29628700 64.0 2453

SRA 150 SBT 2700 50.0 2738OAL = 3.300" 4350 53.0 2880

3100 58.0 28948700 63.0 2532

7-30 WATERS(flat point bullets only)Gun DOUGLASBarrel length 24"Primer REM 91⁄2


Bullet Powder Grains Vel.NOS 120 FN 2015 33.0 2687OAL = 2.530" 2230 34.0 2646

2460 34.0 26142520 37.0 27344064 38.0 2725

NOS 139 FN 2015 31.0 2403OAL = 2.665" 2230 34.0 2542

2460 34.5 25482520 34.5 24724064 35.5 2532

7 x 57mm MAUSERGun DOUGLASBarrel length 24"Primer CCI 200Case WIN

Maximum LoadsBullet Powder Grains Vel.SRA 140 SBT 4064 42.0 2683OAL = 3.025" 2700 47.5 2742

4350 51.0 28363100 51.0 2561

NOS 150 BT 4064 40.0 2519OAL = 3.060" 2700 46.0 2626

4350 49.0 27223100 51.0 2581


7 x 57mm MAUSER (CONTINUED)Maximum Loads

Bullet Powder Grains Vel.HDY 175 SP 4064 39.0 2342OAL = 3.040" 2700 43.0 2401

4350 47.0 25073100 50.0 2442

Remington rolling block, use start charges only.

7mm08 REMINGTONGun DOUGLASBarrel length 24"Primer CCI 200Case REM

Maximum LoadsBullet Powder Grains Vel.NOS 120 SP 2015 38.2 2887OAL = 2.765" 2230 40.3 2887

2460 40.7 29222520 41.4 28744064 43.0 29582700 46.5 28714350 47.5 27943100 47.5 2498

SRA 140 SBT 2015 37.0 2699OAL = 2.800" 2230 39.0 2711

2460 40.0 27682520 39.5 27004064 42.0 27752700 44.5 27004350 47.5 28033100 47.5 2535

SRA 150 SBT 2015 36.0 2578OAL = 2.800" 2230 38.0 2620

2460 38.3 26252520 39.0 26124064 41.0 26672700 43.5 26354350 46.5 27313100 47.0 2494

NOS 160 SP 2015 35.0 2440OAL = 2.800" 2230 36.5 2435

2460 37.0 24522520 38.0 24554064 40.0 25534350 46.0 26303100 47.0 2452

REM 175 SP 2015 35.0 2316OAL = 2.795" 2230 37.0 2373

2460 37.0 23662520 38.0 23644064 39.5 23682700 42.0 23874350 45.5 25013100 47.0 2352


RIFLE DATA 37 RIFLE DATA280 REMINGTONGun DOUGLASBarrel length 24"Primer REM 91⁄2


Bullet Powder Grains Vel.SPR 120 SP 2700 52.5 3001OAL = 3.200" 4350 57.0 3112

3100 60.0 3025BAR 140 X 2700 48.5 2710OAL = 3.310" 4350 51.0 2776

3100 57.0 2839HDY 154 SP 2700 49.0 2718OAL = 3.330" 4350 54.0 2825

3100 58.0 2792NOS 160 SP 2700 48.5 2663OAL = 3.300" 4350 52.0 2742

3100 57.5 2775HDY 175 SP 2700 46.0 2428OAL = 3.300" 4350 51.5 2583

3100 57.0 2681

7mm REMINGTON MAGNUMGun OBERMEYERBarrel length 24"Primer CCI 250Case REM

Maximum LoadsBullet Powder Grains Vel.SPR 120 SP 4064 54.0 3159OAL = 3.260" 2700 61.5 3174

4350 63.0 32153100 71.3 33258700 79.0 2982

SRA 140 SBT 4064 53.0 2937OAL = 3.270" 2700 59.5 2995

4350 61.0 30283100 68.0 30928700 80.0 2777

SRA 150 SBT 4064 51.5 2808OAL = 3.280" 2700 57.5 2900

4350 61.0 29683100 66.0 30038700 79.0 2951

NOS 160 SP 4064 49.5 2667OAL = 3.280" 2700 57.5 2781

4350 57.0 27683100 63.5 28558700 79.0 2933

NOS 175 SP 4064 48.0 2502OAL = 3.275" 2700 53.0 2581

4350 56.0 26533100 60.5 27008700 75.0 2754


7mm WEATHERBY MAGNUMGun DOUGLAS BARRELBarrel length 26"Primer REM 91⁄2 MCase REM

Maximum LoadsBullet Powder Grains Vel.BAR 120 X 4350 71.0 3484OAL = 3.310" 3100 76.0 3477

8700 86.0 3073HDY 139 SBT 4350 69.0 3293OAL = 3.340" 3100 74.0 3313

8700 82.0 2929NOS 150 BT 4350 65.0 3090OAL = 3.350" 3100 72.0 3199

8700 82.0 2902NOS 160 SP 4350 65.0 3039OAL = 3.355" 3100 70.5 3106

8700 81.0 2892NOS 175 SP 4350 63.0 2894OAL = 3.360" 3100 69.0 2976

8700 80.0 2775

30 M1 CARBINEGun DOUGLASBarrel length 20"Primer CCI 400Case REM

Maximum LoadsBullet Powder Grains Vel.(L) 125 RN No.9 11.0 1769OAL = 1.705" 1680 15.0 1756SPR 100 SP No.9 13.3 2015OAL = 1.675" 1680 17.0 1842SPR 110 FMJ No.9 12.6 1893OAL = 1.670" 1680 16.0 1765

7.62 x 39mmGun H.S. PRECISIONBarrel length 20"Primer REM 91⁄2

Case IMIMaximum Loads


2230 29.5 22252460 29.5 2194

SPR 125 SP 1680 25.5 2368OAL = 2.195" 2015 28.5 2309

2230 29.5 22082460 29.5 2176

RIFLE


RIFLE

RIFLE DATA 38 RIFLE DATA7.62 x 39mm (CONTINUED)

Maximum LoadsBullet Powder Grains Vel.SRA 150 SP 1680 22.5 2055OAL = 2.180" 2015 26.0 2072

2230 27.0 19762460 27.0 1956

30/30 WINCHESTER(FN/RN point bullets only)Gun H.S. PRECISIONBarrel length 20"Primer CCI 200Case FED

Maximum LoadsBullet Powder Grains Vel.(L) 152 RN 2015 25.5 1987OAL = 2.450" 2230 26.0 1973

2460 27.0 19942495 28.5 20492520 27.5 2004

(L) 173 FN 2015 26.0 1988OAL = 2.550" 2230 26.0 1954

2460 27.5 20172495 27.5 20132520 28.5 2053

SPR 150 FN 2015 29.0 2192OAL = 2.540" 2230 31.7 2273

2460 32.5 22902495 30.5 22272520 33.5 23254064 33.0 22452700 37.0 2265

NOS 170 FN 2015 27.0 2038OAL = 2.545" 2230 30.0 2124

2460 30.2 21182495 29.5 20952520 31.5 21294064 30.0 19972700 35.0 2098

308 WINCHESTERGun H.S. PRECISIONBarrel length 24"Primer CCI 200Case REM


2460 48.5 31932495 47.0 30222520 47.5 3020


308 WINCHESTER (CONTINUED)Maximum Loads

Bullet Powder Grains Vel.NOS 125 BT 2015 43.5 3018OAL = 2.780" 2230 47.0 3017

2460 47.0 30142495 47.0 29312520 47.5 2955

HDY 150 SP 2015 41.5 2764OAL = 2.745" 2230 43.5 2712

2460 45.0 27652495 46.0 28062520 46.5 28094064 45.5 27602700 48.5 2506

SRA 168 HPBT 2015 40.0 2642OAL = 2.800" 2230 42.0 2610

2460 42.5 26012495 44.5 26542520 45.0 27124064 46.0 27022700 47.0 2493

NOS 180 BT 2230 40.0 2439OAL = 2.800" 2460 41.5 2474

2495 43.0 25922520 44.5 26164064 42.0 24662700 47.0 2470

SRA 190 HPBT 2230 38.5 2368OAL = 2.800" 2460 39.0 2367

2495 40.0 23952520 41.5 24184064 41.0 24152700 45.0 2312


7.62 x 54mm RUSSIANGun DOUGLASBarrel length 24"Primer CCI 250Case NORMA


8700 55.0 1819SRA 150 SP 4350 54.0 2673OAL = 2.850" 3100 55.0 2465

8700 58.0 1898SRA 180 SP 4350 51.0 2497OAL = 2.900" 3100 55.0 2457

8700 57.0 1814


RIFLE DATA 39 RIFLE DATA30/06 SPRINGFIELDGun WILSONBarrel length 24"Primer CCI 200/250Case IMI

Maximum LoadsBullet Powder Grains Vel.(L) 152 RN* 2015 40.0 2623OAL = 3.035" 2230 41.0 2586

2460 41.0 25982495 42.0 24352520 42.0 25824064 46.0 25988700 60.0 2000

(L) 180 RN* 2015 40.0 2470OAL = 3.015" 2230 41.0 2422

2460 41.0 24062495 42.0 24502520 42.0 24124064 45.0 24418700 60.0 1999

(L) 210 RN* 2015 36.0 2188OAL = 3.195" 2230 38.0 2186

2460 38.5 21912495 40.0 22332520 40.0 22324064 43.0 23048700 60.0 2014

HDY 110 RN 2015 53.5 3374OAL = 2.900" 2230 57.0 3385

2460 58.5 34212495 58.0 34462520 60.0 34364064 58.0 34012700 62.0 32804350 NR3100 NR8700 NR

SRA 125 SP 2015 52.0 3189OAL = 3.150" 2230 53.3 3172

2460 53.5 31252495 54.0 32202520 54.0 31264064 57.0 32862700 62.0 31954350 60.0 28923100 NR8700 NR

TECH LINE: 1-800-416-3006WARNING: Reduce listed load by 10% for a start charge. *CCI 250 primer

30/06 SPRINGFIELD (CONTINUED)Maximum Loads

Bullet Powder Grains Vel.SRA 150 SP 2015 48.0 2881OAL = 3.250" 2230 49.4 2865

2460 49.5 28622495 51.5 29072520 51.2 28704064 52.5 30102700 59.0 29324350 59.0 28153100 59.0 26108700 NR

SRA 168 HPBT 2015 45.5 2710OAL = 3.295" 2230 46.0 2663

2460 46.7 26592495 47.0 27072520 47.5 26814064 51.5 28272700 54.0 27324350 59.0 28253100 59.0 26148700 NR

SRA 180 HPBT 2015 44.5 2588OAL = 3.290" 2230 44.0 2568

2460 45.8 25632495 45.5 25952520 46.8 25854064 48.5 27042700 55.0 26464350 57.0 27153100 59.0 26118700 NR

SRA 190 HPBT 2015 43.0 2492OAL = 3.325" 2230 44.0 2477

2460 45.5 25372495 44.0 24922520 45.5 25144064 47.5 26262700 52.0 25194350 55.5 26633100 59.0 25748700 62.0 2173

NOS 200 SP 2015 42.0 2343OAL = 3.295" 2230 43.5 2386

2460 44.5 24292495 43.0 23792520 45.0 24324064 46.0 24752700 51.5 24414350 55.0 25693100 59.0 25618700 62.0 2187

RIFLE


RIFLE

RIFLE DATA 40 RIFLE DATA30/06 SPRINGFIELD (CONTINUED)

Maximum LoadsBullet Powder Grains Vel.SRA 220 RN 2015 42.0 2253OAL = 3.200" 2230 42.5 2248

2460 43.0 22682495 42.5 22222520 44.0 22884064 45.0 23152700 49.5 23274350 55.0 24673100 59.0 24708700 62.0 2168

NOTE: Data listed above is for the Sierra 220 gr. RN.When loading the Sierra 220 gr. HPBT, start andmaximum charge will be 2 grains less.


.300 REMINGTON ULTRA MAGGun UNIVERSAL RECEIVERBarrel length WISEMAN/24"Primer REM 9– MCase REM


4350 95.0 37573100* 98.5 37198700* 115.5 3445

BAR 150 X 4064 74.0 3258OAL = 3.600" 2700 75.0 3250

4350 85.0 33943100* 89.0 33808700* 114.0 3456

NOS 165 BT 4064 74.0 3117OAL = 3.600" 2700 72.0 3102

4350 83.0 32033100* 90.0 32848700* 113.0 3288

SPR 165 GS 4064 71.0 3085OAL = 3.550" 2700 73.0 3100

4350 80.5 32303100* 88.0 32888700* 113.0 3369

SWF 165 A-F 4064 71.0 3093OAL = 3.550" 2700 75.0 3138

4350 85.0 32763100* 92.0 33568700* 113.0 3237


.300 REMINGTON ULTRA MAG (CONTINUED)Maximum Loads

Bullet Powder Grains Vel.HDY 168 HPBT 4064 76.0 3156OAL = 3.600" 2700 74.0 3121

4350 84.0 32773100* 91.0 33268700* 112.0 3297

HDY 180 SPBT 4064 71.0 3016OAL = 3.600" 2700 74.0 3036

4350 81.0 31373100* 89.0 32568700* 113.0 3254

REM 180 PSPCL 4064 74.0 3006OAL = 3.550" 2700 74.5 3026

4350 85.0 31733100* 90.0 32208700* 113.0 3220

SPR 180 GS 4064 71.5 2976OAL = 3.550" 2700 71.5 2975

4350 80.0 31053100* 87.0 31828700* 113.0 3304

SWF 180 A-F 4064 68.5 2935OAL = 3.550" 2700 74.0 3003

4350 82.0 31153100* 89.0 32058700* 112.0 3189

NOS 180 BT 4064 72.0 2963OAL = 3.600" 2700 74.0 3003

4350 80.0 30773100* 88.5 32028700* 113.0 3250

NOS 180 PART 4064 73.0 2981OAL = 3.600" 2700 74.5 3007

4350 82.0 31283100* 89.0 32128700* 113.0 3323

BARNES 180 X 4064 71.0 2920OAL = 3.600" 2700 69.5 2883

4350 74.5 29383100* 86.0 31268700* 113.0 3286

SPR 200 SP 4064 63.0 2661OAL = 3.600" 2700 65.0 2713

4350 69.0 27883100 80.5 29378700 106.0 3119

SPR 200 GS 4064 65.0 2716OAL = 3.550" 2700 67.0 2742

4350 73.0 28623100 81.0 29628700* 110.0 3154


RIFLE DATA 41 RIFLE DATA.300 REMINGTON ULTRA MAG (CONTINUED)

Maximum LoadsBullet Powder Grains Vel.SWF 200 A-F 4064 64.0 2706OAL = 3.550" 2700 73.0 2876

4350 79.0 29383100 86.0 30188700* 111.0 3115

SRA 220 RN 4064 65.0 2588OAL = 3.570" 2700 67.0 2636

4350 69.0 26453100 83.0 28818700* 106.0 2970

300 WINCHESTER MAGNUMGun H.S. PRECISIONBarrel length 24"Primer CCI 200Case REM


4350 79.5 35413100 82.0 3419

SRA 125 SP 2520 65.0 3343OAL = 3.250" 2700 74.5 3478

4350 78.5 34623100 82.0 3373

HDY 130 SP 2520 63.0 3237OAL = 3.300" 2700 73.5 3386

4350 77.0 33783100 82.0 3378

SRA 150 SP 2520 58.0 2959OAL = 3.380" 4064 62.0 3084

2700 69.5 31774350 73.0 31443100 76.0 3108

SRA 168 HPBT 4064 61.0 2973OAL = 3.475" 2700 67.0 2959

4350 72.0 30603100 73.5 2945

SRA 180 SBT 2700 66.0 2879OAL = 3.450" 4350 69.0 2894

3100 72.0 28998700 86.0 2813

SRA 190 HPBT 2700 63.5 2778OAL = 3.450" 4350 68.0 2861

3100 70.0 28038700 86.0 2813

SRA 200 HPBT 2700 62.0 2697OAL = 3.340" 4350 64.0 2696

3100 69.0 27038700 86.0 2747


300 WINCHESTER MAGNUM (CONTINUED)Maximum Loads

Bullet Powder Grains Vel.SRA 220 RN 2700 59.5 2445OAL = 3.300" 4350 65.0 2600

3100 67.0 25608700 86.0 2694

303 BRITISHGun DOUGLASBarrel length 24"Primer CCI 250Case REM


2460 40.0 24802495 44.0 25292520 40.0 24484064 44.0 25232700 42.0 23124350 46.0 23023100 46.0 20638700 48.0 1630

HDY 150 SP 2015 41.0 2714OAL = 3.010" 2230 43.0 2704

2460 44.0 27282495 46.0 27272520 46.0 27694064 47.5 27552700 48.0 25614350 46.0 2254

SRA 180 SP 2015 38.0 2420OAL = 3.000" 2230 40.0 2472

2460 40.5 24422495 44.0 24782520 44.0 25684064 45.0 25372700 46.0 24284350 46.0 22803100 46.0 2042

8 x 57mm JS (.323")Gun DOUGLASBarrel length 24"Primer CCI 250Case REM


2460 51.0 29062520 52.5 2955

RIFLE


RIFLE

RIFLE DATA 42 RIFLE DATA8 x 57mm JS (.323") (CONTINUED)

Maximum LoadsBullet Powder Grains Vel.HDY 170 RN 2015 45.5 2707OAL = 2.855" 2230 49.0 2743

2460 49.0 27282520 50.0 2752

HDY 220 SP 2015 41.0 2314OAL = 2.990" 2230 42.0 2296

2460 43.5 23452520 45.0 23512700 53.0* 24424350 51.0* 2274

.338 REMINGTON ULTRA MAGGun WISEMANBarrel length 24"Primer REM 91⁄2 MCase REM


3100 95.0* 32268700 112.0* 2916

HDY 225 SP 2700 80.0 2905OAL = 3.575" 4350 88.0 3041

3100 92.0* 30398700 106.0* 2781

SRA 250 SPBT 2700 72.0 2711OAL = 3.575" 4350 82.5 2860

3100 87.5* 28758700 104.0* 2687

SWF 275 AF 2700 66.0 2471OAL = 3.490" 4350 74.0 2586

3100 84.0* 26968700 98.0* 2490

338 WINCHESTER MAGNUMGun H.S. PRECISIONBarrel length 24"Primer CCI 250Case FED


4064 63.0 28612700 70.5 28984350 73.0 29503100 76.0 28338700 80.0 2303


338 WINCHESTER MAGNUM (CONTINUED)Maximum Loads

Bullet Powder Grains Vel.HDY 225 SP 2495 54.0 2585OAL = 3.340" 2520 56.0 2579

4064 60.5 27022700 66.0 27034350 70.5 28003100 73.0 26828700 79.0 2247

SRA 250 SBT 2495 52.0 2445OAL = 3.340" 2520 56.0 2474

4064 58.0 25482700 63.0 25474350 65.0 25863100 71.0 26078700 81.0 2338

SPR 275 SSP 2495 50.0 2242OAL = 3.330" 2520 53.0 2296

4064 55.0 23482700 63.5 24514350 64.0 24593100 68.0 24328700 78.0 2297

35 REMINGTONGun DOUGLASBarrel length 24"Primer CCI 200Case REM


2520 38.0 2084SPR 180 FN 2230 36.5 2061OAL = 2.465" 2460 37.0 2089

2520 39.0 2122SRA 200 RN 2230 35.0 1982OAL = 2.470" 2460 37.0 2028

2520 39.0 2071

35 WHELENGun DOUGLASBarrel length 24"Primer CCI 200Case REM


2460 57.0 27282520 58.5 27552700* 65.0 27444350* 59.0 23573100* 60.0 2138


RIFLE DATA 43 RIFLE DATA35 WHELEN (CONTINUED)

Maximum LoadsBullet Powder Grains Vel.SRA 225 SBT 2015 49.0 2554OAL = 3.280" 2230 52.5 2573

2460 54.0 26132520 55.0 25992700 61.5 26014350 59.0* 24103100 60.0* 2165

SPR 250 SP 2015 47.5 2411OAL = 3.245" 2230 51.0 2429

2460 51.5 24322520 52.0 24112700 60.0* 24314350 60.0* 23843100 60.0* 2136

375 H&H MAGNUMGun DOUGLASBarrel length 25"Primer REM 91⁄2MCase WIN

Maximum LoadsBullet Powder Grains Vel.SPR 235 SP 2520 71.0 2875OAL = 3.450" 2700 80.0 2879

4350 86.0* 28353100 86.0* 2567

HDY 270 SP 2700 80.0* 2691OAL = 3.570" 4350 84.0* 2711

3100 86.0* 2519SRA 300 SBT 2700 75.0 2550OAL = 3.585" 4350 79.0* 2547

3100 83.0* 2453BAR 350 RN 2700 67.0 2259OAL = 3.560" 4350 75.0* 2355

3100 73.0* 2106

38/55 WINCHESTERGun DOUGLASBarrel length 24"Primer CCI 300Case WIN

Maximum LoadsBullet Powder Grains Vel.(L) 240 FN 2015 31.5 1943OAL = 2.510" 2495 38.0* 2020SRA 200 FN 2015 36.0 2132OAL = 2.590" 2495 40.0* 2037HDY 220 FN 2015 32.0 1886OAL = 2.580" 2495 38.0* 2045


416 REMINGTON MAGNUMGun DOUGLASBarrel length 24"Primer REM 91⁄2MCase REM

Maximum LoadsBullet Powder Grains Vel.BAR 350 X 2015 75.0 2618OAL = 3.680" 2230 79.0 2645

2460 79.0 26112520 78.0 25634064 83.0 25402700 86.0* 25364350 80.0* 2221

HDY 400 RN 2015 70.0 2391OAL = 3.580" 2230 73.0 2380

2460 74.0 23832520 75.0 23854064 80.0 24192700 85.0 24424350 87.0* 2449

416 RIGBYGun DOUGLASBarrel length 26"Primer FED 215Case FED

Maximum LoadsBullet Powder Grains Vel.SPR 400 SP 3100 100.0 2337OAL = 3.635" 8700* 120.0 2139

40/65 WINCHESTERGun C. SHARPSBarrel length 36"Primer WIN WLRCase WIN

Maximum LoadsBullet Powder Grains Vel.(L) 300 2495 43.0 1874OAL = 2.660" 8700* 60.0 1426(L) 350 2495 40.0 1768OAL = 2.660" 8700* 54.0 1255(L) 400 2495 37.0 1633OAL = 2.830" 8700* 52.0 1183

TECH LINE: 1-800-416-3006

RIFLE


RIFLE

RIFLE DATA 44 RIFLE DATA.450 MARLINGun DOUGLASBarrel length 24"Primer CCI 250Case REM

Maximum LoadsBullet Powder Grains Vel.SRA 300 FNHP 1680 58.0 2389OAL = 2.550" 2015 61.0* 2410

2230 64.5* 24202460 67.0* 24072520 63.0* 2211

SPR 350 FNHP 1680 57.2 2086OAL = 2.550" 2015 55.5* 2207

2230 62.0* 22472460 62.0* 21852520 62.0* 21542700 62.0* 1869

SPR 400 FN 1680 46.0 18832015 52.5* 20472230 55.4* 20402460 60.0* 20752520 59.0* 20382700 59.0* 1761

45/70 GOVERNMENT (RUGER, MARLIN,SHARPS, WINCHESTER)—Level 2Gun DOUGLASBarrel length 24"Primer WIN WLRCase WIN


4350 60.0 16223100 60.0 14858700 60.0 1026

(L) 405 FN 2015 54.0 1665OAL = 2.550" 2495 54.0 1801

2700 54.0 16654350 56.0 14743100 60.0 14228700 60.0 1165

(L) 500 FN 2015 42.0 1567OAL = 2.550" 2495 49.0 1670

2700 47.0 14144350 58.0 15823100 60.0 1493**8700 60.0 1000**

SRA 300 HP 2015 59.0 2164OAL = 2.550" 2495 66.0 2175

2700 65.0 19394350 70.0 18153100 70.0 1705

*Denotes a compressed load.**OAL is 2.795" ***OAL is 2.825"

45/70 GOVERNMENT (CONTINUED)Maximum Loads

Bullet Powder Grains Vel.HDY 350 RN 2015 53.0 1932OAL = 2.550" 2495 61.0 2057

2700 61.0 17944350 65.0 17353100 65.0 1590

SPR 400 FN 2015 49.0 1761OAL = 2.560" 2495 55.0 1836

2700 55.0 16084350 60.0 1570*3100 60.0 1452*8700 60.0 992*

HDY 500 RN 2015 40.0 1422OAL = 2.580" 2495 46.0 1538

2700 46.0 13274350 58.0 1602**3100 60.0 1441***8700 60.0 1033***

50 BROWNINGGun FRESHOURBarrel length 44"Primer CCI 35Case IMI

Maximum LoadsBullet Powder Grains Vel.MIL 642 FMJ 8700 228.0 2930OAL = 5.545"MIL 750 FMJ 8700 218.0 2700OAL =5.545"

TECH LINE: 1-800-416-3006


Load Bushing DataNOTE: VERIFY POWDER CHARGE WITH A SCALEPRIOR TO LOADING

Hornady 366/APEX Presses

SOLO SOLO No. 2 NitroDesired 1000 1250 Improved 100Grains Bushing Bushing Bushing Bushing

13.0 354 36613.5 360 37214.0 387 369 37514.5 393 378 38115.0 399 384 38715.5 408 390 39316.0 411 396 39916.5 417 402 351 40517.0 420 408 357 41117.5 429 414 363 41718.0 432 420 366 42318.5 435 426 372 42919.0 438 429 378 43519.5 441 435 384 44120.0 447 441 387 44720.5 453 447 393 45321.0 459 453 396 45621.5 468 456 402 45722.0 474 459 408 46522.5 480 465 41123.0 471 41723.5 477 42024.0 48024.5 48625.0 49225.5 49526.0 50126.5 50227.0 51027.5 51328.0 51628.5 52229.0 52529.5 53130.0 53730.5 —31.0 54331.5 54932.0 55533.0 558

MEC Single Stage Presses

SOLO SOLO No. 2 NitroBushing 1000 1250 Improved 100

Grains Grains Grains Grains

20 13.9 17.021 14.2 18.022 14.7 18.723 15.0 19.424 15.6 20.225 16.1 20.5 15.526 16.0 17.0 21.6 16.327 16.3 17.9 22.6 17.028 17.3 18.4 23.5 17.529 18.0 19.4 18.330 18.8 19.9 19.131 19.2 20.5 19.732 20.8 21.2 20.333 21.4 22.3 20.834 22.0 23.1 21.535 22.8 23.7 22.336 23.3 24.6 23.037 23.8 25.2 23.938 24.5 26.438A 25.3 26.739 26.3 28.339A 29.140 29.640A 30.241 31.941A 32.442 33.642A 34.443 35.5

BUSHING 4100

11 13.5

Ponsness-Warren Presses

SOLO SOLO No. 2 NitroBushing 1000 1250 Improved 100Letter Grains Grains Grains Grains

D1 12.0 10.7E 13.7 17.0 11.9E1 14.0 18.4 12.5E2 14.5 19.0 13.1F 14.3 15.5 20.2 13.9F1 14.5 15.7 20.5 14.1G 15.9 17.5 22.7 15.6G1 16.4 17.7 23.0 15.9H 17.5 19.0 24.5 16.7I 18.5 19.5 17.2J 19.7 20.3 17.9J1 20.4 20.8 18.7K 20.7 21.4 19.1L 21.4 22.5 20.2M 22.1 23.5 20.3N 23.5 25.0 22.5O 24.0 25.5 23.0P 24.6 26.0 23.7Q 26.3 24.0R 28.0S 28.3T 30.0U 32.0V 32.5

MEC Progressive Presses

SOLO SOLO No. 2 NitroBushing 1000 1250 Improved 100Number Grains Grains Grains Grains

20 13.5 17.021 13.9 18.022 14.4 18.723 14.8 19.424 15.5 20.225 14.2 16.0 20.5 14.526 14.5 16.8 21.6 15.227 15.5 17.5 22.6 15.728 16.2 18.0 23.5 16.529 17.0 18.9 17.330 17.4 19.6 17.931 19.0 20.1 18.532 19.6 21.0 19.033 20.2 22.0 19.734 21.0 22.6 20.535 21.5 23.2 21.236 22.0 24.3 22.137 22.7 25.038 23.5 26.038A 24.5 26.539 28.039A 28.940 29.540A 30.141 31.341A 32.042 33.042A 34.043 35.0

45

BUSHING


BUSHING

Load Bushing DataNOTE: VERIFY POWDER CHARGE WITH A SCALEPRIOR TO LOADING

LEE AUTO-DISK CAVITIES

Powder 0.30 0.32 0.34 0.37 0.40 0.43 0.46 0.49 0.53 0.57 0.61 0.66

NITRO100 2.2 2.4 2.5 2.7 3.0 3.2 3.4 3.6 3.9 4.2 4.5 4.9No. 2I 2.9 3.0 3.3 3.5 3.8 4.1 4.4 4.6 5.0 5.4 5.8 6.3No. 5 4.8 5.1 5.5 5.9 6.4 6.9 7.4 7.9 8.5 9.2 9.8 10.6No. 7 4.6 4.9 5.2 5.7 6.1 6.6 7.0 7.5 8.1 8.7 9.3 10.1No. 9 4.6 4.9 5.2 5.6 6.1 6.5 7.0 7.5 8.1 8.7 9.3 10.11680 4.6 4.9 5.2 5.6 6.1 6.6 7.0 7.5 8.1 8.7 9.3 10.1XMR2015 4.1 4.4 4.7 5.1 5.5 5.9 6.3 6.7 7.3 7.8 8.4 9.02230 4.6 4.9 5.2 5.6 6.1 6.5 7.0 7.5 8.1 8.7 9.3 10.02460 4.6 4.9 5.2 5.6 6.1 6.6 7.0 7.5 8.1 8.7 9.3 10.1XMR2495 4.0 4.3 4.5 4.9 5.3 5.7 6.1 6.5 7.1 7.6 8.2 8.82520 4.4 4.7 5.0 5.4 5.9 6.3 6.7 7.2 7.8 8.4 8.9 9.72700 4.4 4.7 5.0 5.4 5.8 6.3 6.7 7.2 7.7 8.3 8.9 9.6XMR4350 4.1 4.3 4.6 5.0 5.4 5.8 6.2 6.6 7.2 7.7 8.2 8.9XMR3100 4.0 4.3 4.5 4.9 5.3 5.7 6.1 6.5 7.1 7.6 8.2 8.88700 4.4 4.7 4.9 5.4 5.8 6.3 6.7 7.1 7.7 8.3 8.9 9.6SOLO 1000 2.3 2.4 2.6 2.8 3.0 3.2 3.5 3.7 4.0 4.3 4.6 5.0XMP 5744 4.0 4.2 4.5 4.9 5.3 5.7 6.1 6.5 7.0 7.5 8.1 8.7

LEE AUTO-DISK CAVITIES—Cont’d.

Powder 0.71 0.76 0.82 0.88 0.95 1.02 1.09 1.18 1.26 1.36 1.46 1.57

NITRO100 5.3 5.6 6.1 6.5 7.0 7.6 8.1 8.7 9.3 10.1 10.8 11.6No. 2I 6.8 7.3 7.8 8.4 9.0 9.8 10.4 11.3 12.0 13.0 13.9 15.0No. 5 11.4 12.2 13.2 14.1 15.3 16.4 17.5 18.9 20.2 21.8 23.4 25.2No. 7 10.9 11.6 12.6 13.5 14.5 15.6 16.7 18.1 19.3 20.8 22.4 24.0No. 9 10.8 11.6 12.5 13.4 14.5 15.5 16.6 18.0 19.2 20.7 22.2 23.91680 10.8 11.6 12.5 13.4 14.5 15.6 16.6 18.0 19.2 20.8 22.3 24.0XMR2015 9.7 10.4 11.2 12.1 13.0 14.0 14.9 16.2 17.3 18.6 20.0 21.52230 10.8 11.6 12.5 13.4 14.5 15.5 16.6 18.0 19.2 20.7 22.2 23.92460 10.8 11.6 12.5 13.4 14.5 15.5 16.6 18.0 19.2 20.7 22.2 23.9XMR2495 9.5 10.2 11.0 11.8 12.7 13.6 14.6 15.8 16.8 18.2 19.5 21.02520 10.4 11.1 12.0 12.9 13.9 14.9 16.0 17.3 18.5 19.9 21.4 23.02700 10.4 11.1 12.0 12.9 13.9 14.9 15.9 17.2 18.4 19.9 21.3 22.9XMR4350 9.6 10.3 11.1 11.9 12.8 13.8 14.7 16.0 17.0 18.4 19.7 21.2XMR3100 9.5 10.2 11.0 11.8 12.7 13.6 14.6 15.8 16.8 18.2 19.5 21.08700 10.3 11.1 11.9 12.8 13.8 14.8 15.8 17.2 18.3 19.8 21.2 22.8SOLO 1000 5.3 5.7 6.2 6.6 7.1 7.7 8.2 8.9 9.5 10.2 11.0 11.8XMP 5744 9.4 10.0 10.8 11.6 12.6 13.5 14.4 15.6 16.7 18.0 19.3 20.7

LEE DIPPERS

Powder 0.30 0.50 0.70 1.00 1.30 1.60 1.90 2.20 2.50 2.80 3.10 3.40 3.70 4.00 4.30

NITRO100 2.2 3.7 5.2 7.4 9.6 11.9 14.1 16.3 18.5 20.8 23.0 25.2 27.4 29.7 31.9No. 2I 2.9 4.8 6.7 9.5 12.4 15.3 18.2 21.0 23.8 26.7 29.6 32.5 35.3 38.2 41.0No. 5 4.8 8.0 11.2 16.1 20.9 25.7 30.5 35.3 40.1 45.0 49.8 54.6 59.4 64.2 69.0No. 7 4.6 7.7 10.7 15.3 19.9 24.5 29.1 33.7 38.3 42.9 47.5 52.1 56.7 61.2 65.8No. 9 4.6 7.6 10.7 15.2 19.8 24.4 28.9 33.5 38.1 42.6 47.2 51.8 56.4 60.9 65.51680 4.6 7.6 10.7 15.3 19.8 24.4 29.0 33.6 38.2 42.7 47.3 51.9 56.5 61.0 65.6XMR2015 4.1 6.8 9.6 13.7 17.8 21.9 26.0 30.1 34.2 38.3 42.5 46.6 50.7 54.8 58.92230 4.6 7.6 10.7 15.2 19.8 24.4 28.9 33.5 38.1 42.6 47.2 51.8 56.3 60.9 65.52460 4.6 7.6 10.7 15.2 19.8 24.4 28.9 33.5 38.1 42.7 47.2 51.8 56.4 60.9 65.5XMR2495 4.0 6.7 9.4 13.4 17.4 21.4 25.4 29.4 33.4 37.4 41.4 45.4 49.4 53.5 57.52520 4.4 7.3 10.3 14.6 19.0 23.4 27.8 32.2 36.6 41.0 45.4 49.8 54.2 58.6 63.02700 4.4 7.3 10.2 14.6 19.0 23.4 27.7 32.1 36.5 40.9 45.3 49.7 54.0 58.4 62.8XMR4350 4.1 6.8 9.5 13.5 17.6 21.6 25.7 29.7 33.8 37.8 41.9 46.0 50.0 54.1 58.1XMR3100 4.0 6.7 9.4 13.4 17.4 21.4 25.4 29.4 33.4 37.4 41.4 45.4 49.4 53.5 57.58700 4.4 7.3 10.2 14.5 18.9 23.3 27.6 32.0 36.4 40.7 45.1 49.4 53.8 58.2 62.5SOLO 1000 2.3 3.8 5.3 7.5 9.8 12.0 14.3 16.5 18.8 21.0 23.3 25.6 27.8 30.1 32.3XMP 5744 4.0 6.6 9.3 13.2 17.2 21.1 25.1 29.1 33.0 37.0 41.0 44.9 48.9 52.9 56.8

LEE CHARGE BAR BUSHINGS

Powder .095 .100 .105 .110 .116 .122 .128 .134 .141 .148 .151 .155 .163 .171 .180 .189 .198

NITRO100 11.3 11.9 12.5 13.0 13.8 14.5 15.2 15.9 16.7 17.6 17.9 18.4 19.3 20.3 21.4 22.4 23.5SOLO 1000 11.4 12.0 12.6 13.2 13.9 14.7 15.4 16.1 17.0 17.8 18.2 18.6 19.6 20.6 21.6 22.7 23.8

46


SHOTSHELL DATA 47 SHOTSHELL DATA

Shotshell Data12-Ga., 23⁄4-IN. Winchester Plastic AA-Type Shells

Min. Overall Length: Max. Crimp Depth:29⁄32-IN. 2⁄32-IN.

SOLO 1000 NITRO 100 No. 2Improved SOLO 1250

Dram Approx. Approx. Approx. Approx. Approx.Ounces Primer Grains Grains Grains GrainsEquiv- Velocity, Wad Pressure Pressure Pressure PressureLead Type Wt. Wt. Wt. Wt.alent Ft./Sec. PSI PSI PSI PSI

COWBOY ACTION

3⁄4 —

1176 WIN 209 FED 12S0 — — 15.0 4000

1232 WIN 209 FED 12S0 — — 16.0 4500

1295 WIN 209 FED 12S0 — — 17.0 5100

1361 WIN 209 FED 12S0 — — 18.0 6100

1160 WIN 209 WAA12SL 17.0 3400 — —

1206 WIN 209 WAA12SL 18.0 3700 — —

1276 WIN 209 WAA12SL 19.0 4700 — —

1336 WIN 209 WAA12SL 20.0 5400 — —

7⁄8 —

1143 WIN 209 FED 12S0 — — 15.0 4900

1196 WIN 209 FED 12S0 — — 16.0 5700

1263 WIN 209 FED 12S0 — — 17.0 6900

1320 WIN 209 FED 12S0 — — 18.0 7900

1148 WIN 209 WAA12SL 17.0 4100 — —

1203 WIN 209 WAA12SL 18.0 5000 — —

1247 WIN 209 WAA12SL 19.0 5400 — —

1305 WIN 209 WAA12SL 20.0 6200 — —

1 —

1107 WIN 209 WAA12SL — — 15.0 5400

1174 WIN 209 WAA12SL — — 16.0 6700

1223 WIN 209 WAA12SL — — 17.0 7400

1275 WIN 209 WAA12SL — — 18.0 8800

1175 WIN 209 WAA 12 17.0 5900 — —

1190 WIN 209 WAA 12 18.0 7200 — —

1221 WIN 209 WAA12 19.0 7300 — —

1271 WIN 209 WAA 12 20.0 8600 — —

11⁄8 —

1092 WIN 209 WAA12SL — — 15.0 7400

1130 WIN 209 WAA12SL — — 16.0 7900

1184 WIN 209 WAA12SL — — 17.0 9500

1227 WIN 209 WAA12SL — — 18.0 9700

1108 WIN 209 WAA 12 17.0 7500 — —

1164 WIN 209 WAA 12 18.0 9300 — —

1194 WIN 209 WAA 12 19.0 9500 — —

1237 WIN 209 WAA 12 20.0 10300 — —

REGULAR TARGET LOADS

7⁄8 — 1325

CHED 209 WAA12SL 20.5 7200 18.5 7100

CCI 209 WAA12SL 21.0 7100 18.5 7500

FED209A GRN DUSTER 20.5 7700 18.0 8000

REM209P WAA12SL 21.0 6800 18.5 6700

WIN 209 WAA12SL 20.5 7900 18.0 7200

FIO 616 WAA12SL 20.5 8200 18.0 7700

CCI209M WAA12SL 20.5 8300 18.0 73007⁄8 — 1445 WIN 209 WAA12SL 22.5 9500 20.5 9800

1 23⁄4 1200

WIN 209 WAA12SL 18.0 8500 16.5 7400

WIN 209 WINDJAMMER 18.0 7700 17.0 6400

WIN 209 CB 2100 18.0 7800 17.0 7000

WIN 209 FED 12S0 18.0 8200 16.5 7900

WIN 209 GRN DUSTER 18.0 7600 16.5 7100

SHOTSHELL


SHOTSHELL


12-Ga., 23⁄4-IN. Winchester Plastic AA-Type ShellsMin. Overall Length: Max. Crimp Depth:

29⁄32-IN. 2⁄32-IN.SOLO 1000 NITRO 100 No. 2

Improved SOLO 1250


1 23⁄4 1200

WIN 209 CB 1100 18.0 8500 16.7 6800

WIN 209 REMTGT 18.5 8200 16.8 6700

CCI 209 WAA12SL 18.5 7700 16.8 7400

CCI209M WAA12SL 18.0 8200 16.8 7600

CHED 209 WAA12SL 18.0 8000 16.8 7400

FED209A WAA12SL 18.0 8500 16.8 7600

FIO 616 WAA12SL 18.0 7400 16.8 7300

REM209P WAA12SL 18.5 7800 16.8 6700

CCI 209 HAWK II 18.5 8100 16.8 7500

1 3 1245CCI209M BLUE DUSTER 19.0 8000 17.3 7900

WIN 209 WAA12SL 19.0 8200 17.3 8200

1 31⁄4 1290

WIN 209 WAA12SL 19.5 10300 18.0 9000

WIN 209 TRAPPER 19.5 9000 18.5 8500

WIN 209 CB 1118-12 19.5 9500 18.5 9600

WIN 209 REM TGT 12 19.5 9000 18.0 8700

WIN 209 REM FIG 8 19.5 9300 18.0 8400

WIN 209 FED 12S0 19.5 9900 18.0 9700

CCI 209 WAA12 20.5 9400 18.5 10300

REM209P WAA12 20.0 9600 18.5 10200

FED209A GRN DUSTER 20.0 9800 18.5 10300

FIO 616 WAA12 19.5 9600 18.0 10600

CCI209M WAA12 19.5 9900 18.0 10700

1 33⁄4 1350

WIN 209 WAA12SL — — 19.5 10200

CCI 209 GRN DUSTER — — 19.8 9900

FED209A FED 12S0 — — 19.0 10400

11⁄8 Extra 1125

WIN 209 WAA12 17.0 9000 15.5 8100 17.0 6400

Light

WIN 209 BP 18 17.0 7800 15.5 7900

WIN 209 TRAPPER 16.5 9500 15.5 7000 17.0 5800

WIN 209 VERSALITE 16.5 9300 15.5 7900 16.8 6500

WIN 209 P.C. (Red) 17.0 7900 15.5 7700

WIN 209 CB 2118-12 16.5 8200 15.5 8300

WIN 209 REM TGT 12 16.5 8800 15.5 8400 17.2 6800

WIN 209 REM FIG 8 16.5 8400 15.5 8300 17.2 6000

WIN 209 BLUE DUSTER 16.5 7200 15.5 8200 17.2 6500

WIN 209 FED 12S3 16.0 10300 15.5 7300 17.2 6600

CCI 209 WAA12 16.5 8900 15.5 8700 17.3 6300

CCI 209 CB 2118-12 17.0 7100 15.5 7900 17.2 6000

REM209P WAA12 17.0 7200 15.5 7500 17.6 6000

FED209A WAA12 16.0 9400 15.5 9000 17.2 6300

FIO 616 WAA12 16.0 8500 15.5 9100 17.2 6200

CCI209M WAA12 16.0 8600 15.5 9100 17.2 6800

CHED 209 WAA12 17.5 7500 16.0 7900

11⁄8 23⁄4 1145

WIN 209 WAA12 17.5 9700 16.0 8800 17.7 6900

WIN 209 WAA12SL 16.0 8700 17.7 6600

WIN 209 VERSALITE 17.0 9800 16.0 9100 17.2 7600

WIN 209 P.C. (Red) 17.5 9300 16.0 8200 17.8 6200

WIN 209 BP 18 17.5 7900 16.0 8300 17.2 5900

WIN 209 CB 2118-12 17.0 8600 16.5 8400 17.2 5800



12-Ga., 23⁄4-IN. Winchester Plastic AA-Type ShellsMin. Overall Length: Max. Crimp Depth:


Improved SOLO 1250


11⁄8 23⁄4 1145

WIN 209 HAWK II 17.0 10000 16.0 9100 17.8 6200

WIN 209 REM RXP 12 17.0 8900 16.0 8900 18.0 6400

WIN 209 REM FIG 8 17.0 8500 16.0 8600 17.8 6300

WIN 209 BLUE DUSTER 17.0 8200 16.0 8700 17.8 6800

WIN 209 FED 12S3 16.5 10500 16.0 8700 17.8 7200

CCI 209 WAA12 17.5 10000 16.0 9700 17.7 6400

CCI 209 CB 1118-12 17.5 8200 16.0 9500 17.7 6600

REM209P WAA12 17.5 9500 16.0 7800 17.7 6800

FED209A WAA12 16.5 9800 16.0 9700 17.5 6700

FIO 616 WAA12 16.5 9800 16.0 9200 17.7 6700

CCI209M BLUE DUSTER 16.5 9400 16.0 9300 17.5 7700

CHED 209 WAA12 16.5 9000 16.5 10400

11⁄8 3 1200

WIN 209 WAA12 18.5 10800 17.0 9700 19.0 8700 21.5 9800

WIN 209 WAA12SL — — 17.0 9900 19.0 8300

WIN 209 VERSALITE 18.0 10300 17.0 11200 18.5 8800 21.5 9500

WIN 209 P.C. (Red) 18.5 9700 17.5 10000 21.5 9000

WIN 209 BP 18 18.5 9700 17.0 9500 22.0 9500

WIN 209 CB 1118-12 18.0 9900 17.0 9300 18.5 7800 22.0 8800

WIN 209 TRAPPER 18.5 10000 17.0 10400 19.0 7900 22.0 8900

WIN 209 REM RXP 12 18.0 10700 17.0 10000 19.0 7300 22.5 9000

WIN 209 REM FIG 8 18.0 9800 17.5 9600 19.0 7700 22.5 9000

WIN 209 FED 12C1 18.0 11400 17.0 9900 19.0 7700 22.0 9200

WIN 209 BLUE DUSTER 18.0 10700 17.0 11100 19.0 8400 22.0 10300

CCI 209 WAA12 18.0 10500 17.0 10000 19.0 8300 23.5 8800

CCI 209 CB 1118-12 18.5 8800 17.0 9600 19.0 7400 23.5 8800

REM209P WAA12 18.0 11500 17.0 10100 19.5 8300 23.5 9100

FED209A WAA12 18.5 11200 16.5 10900 19.0 9200 22.0 9800

FIO 616 BLUE DUSTER 18.5 9400 17.0 10700 19.0 9000 22.5 9500

CCI209M WAA12 18.5 9500 17.0 10800 19.0 9000 22.5 9900

CHED 209 WAA12 19.0 9900 17.0 10700

11⁄8 31⁄4 1255

WIN 209 WAA12 — — — — 20.0 10000 22.5 10800

WIN 209 VERSALITE — — — — 20.0 9900 23.0 10800

WIN 209 P.C. (Red) 19.5 11000 18.5 11100 23.0 10100

WIN 209 BP 18 — — 18.0 10800 23.0 10800

WIN 209 CB 1118-12 19.5 11500 — — 20.0 8900 22.5 10200

WIN 209 REM RXP 12 — — 19.0 10500 23.0 10400

WIN 209 REM TGT 12 — — 18.0 11500 22.5 10200

WIN 209 FED 12C1 — — 18.0 11400 22.5 10600

CCI 209 CB 1118-12 20.0 10300 — — 24.0 9500

11⁄8 31⁄2 1310

WIN 209 WAA12 24.0 11000

WIN 209 REM FIG 8 25.0 10200

WIN 209 P.C. (Red) 25.0 10300

WIN 209 WINDJAMMER 25.5 9600

WIN 209 CB1118-12 25.0 10300

11⁄4 31⁄4 1220WIN 209 WAA12R 23.5 10700

WIN 209 REM SP12 23.0 10300

FED209A WAA12R 23.5 10700

11⁄4 31⁄2 1275 WIN 209 WAA12R 24.0 11100

SHOTSHELL


SHOTSHELL


12-Ga., 23⁄4-IN. Winchester Plastic Grey Super SportMin. Overall Length: Max. Crimp Depth:


Improved SOLO 1250

Dram Approx. Approx. Approx. Approx. Approx.Ounces Primer Wad Grains Grains Grains GrainsEquiv- Velocity, Pressure Pressure Pressure PressureLead Type Type Wt. Wt. Wt. Wt.alent Ft./Sec. PSI PSI PSI PSI

7⁄8 — 1325

WIN 209 WAA12SL 21.0 5800 18.5 7200

FED209A CB2100 20.5 6300 18.0 8000

CCI 209 FED 12S0 21.0 5900 17.8 7300

FIO 616 GRN DUSTER 20.5 6100 17.5 8100

CHED 209 WAA12SL 20.0 6900 17.8 7700

1 23⁄4 1200

WIN209A WAA12SL 18.2 6000 16.5 7200

FED209A CB2100 18.0 6000 16.2 8100

CCI 209 FED 12S0 18.5 6000 16.8 6900

FIO 616 GRN DUSTER 18.2 7000 16.2 7600

CHED 209 WAA12SL 18.5 6100 16.3 7400

1 31⁄4 1290

WIN 209 WAA12SL 20.0 8600 18.3 9100

FED209A VERSALITE 19.5 9200 17.5 10600

CCI 209 TRAPPER 20.5 9000 18.5 8600

FIO 616 GRNDUSTER 19.8 9700 17.8 10500

CHED 209 FED 12SL 19.8 9200 18.0 9500

11⁄8 23⁄4 1145

WIN 209 WAA12 17.8 8000 16.2 8800

FED209A CB1118-12 17.8 7500 16.0 9700

CCI 209 HAWK II 18.0 7600 16.2 9700

FIO 616 BLUE DUSTER 17.5 8200 16.0 9200

CHED 209 TRAPPER 17.5 8900 16.5 10400

11⁄8 3 1200

WIN 209 WAA12 19.0 10500 17.0 9700

FED209A CB1118-12 18.5 10300 16.8 9600

CCI 209 HAWK II 18.7 10000 17.3 9500

FIO 616 BLUE DUSTER 18.5 10000 17.0 10000

CHED 209 TRAPPER 18.7 10400 17.0 10000

12-Ga., 23⁄4-IN. Remington STS Plastic Target ShellsMin. Overall Length: Max. Crimp Depth:


Improved SOLO 1250


COWBOY ACTION

3⁄4 —

1281

REM209P

FED

— — 17.0 5500

STS

12SO

+

ONE

.135" CARD

1344 — — 18.0 6400

1404 — — 19.0 7100

1446 — — 20.0 7800

3⁄4 —

1171 17.0 4300 — —

1224 18.0 4800 —

1286 19.0 5700 — —

1343 20.0 6500 — —

7⁄8 —

1270

REMFED

— — 17.0 7100

209P

STS12SO

1322 — — 18.0 8000

1367 — — 19.0 8500

1419 — — 20.0 9800

7⁄8 —

1169 17.0 5600 — —

1215 18.0 6200 — —

1281 19.0 7300 — —

1314 20.0 7600 — —


SHOTSHELL DATA 51 SHOTSHELL DATA12-Ga., 23⁄4-IN. Remington STS Plastic Target ShellsMin. Overall Length: Max. Crimp Depth:


Improved SOLO 1250


1 —

1092

REMFED

— — 15.0 5600

209P

STS12SO

1150 — — 16.0 6600

1207 — — 17.0 7500

1263 — — 18.0 8500

1 —

1100 17.0 5200 — —

1153 18.0 5900 — —

1220 19.0 7200 — —

1270 20.0 8400 — —

11⁄8 —

1074

REMREM

— — 15.0 6500

209P

STSTGT

1122 — — 16.0 7300

1163 — — 17.0 8100

1236 — — 18.0 10100

11⁄8 —

1010 15.0 5600 — —

1051 16.0 6100 — —

1110 17.0 7600 — —

1146 18.0 8000 — —


7⁄8 — 1325

CHED 209 WIN 7⁄8 GREY 20.5 6700 18.0 8100

CCI 209 REM TGT 21.0 6600 18.5 8000

FED209A REM TGT 20.0 7600 18.0 9000

REM209P REM TGT 21.0 6400 18.0 8100

WIN 209 REM TGT 20.5 7500 18.0 7600

FIO 616 GREEN DUSTER 20.5 6800 18.0 8100

CCI209M REM TGT 20.5 7000 18.0 80007⁄8 — 1435 REM209P REM TGT 23.0 8100 21.0 8100

1 23⁄4 1200

REM209P REM FIG 8 19.5 6600 16.5 7600

REM209P REM TGT 12 19.0 7000 16.5 7400

REM209P CB 1100 19.0 6500 16.0 7500

REM209P GREEN DUSTER 18.0 8100 16.0 8000

REM209P TRAPPER 18.5 6700 16.0 8800

CCI 209 REM FIG 8 19.0 6300 16.5 7800

CCI 209 REM TGT 12 19.5 6200 16.5 7900

WIN 209 REM FIG 8 18.5 7100 16.0 7500

WIN 209 REM TGT 12 19.0 7200 16.0 7700

FED209A REM FIG 8 18.0 7500 16.0 8400

FED209A REM TGT 12 18.0 7400 16.0 8300

1 31⁄4 1290

REM209P REM FIG 8 21.0 7300 18.0 9300

REM209P REM TGT 12 21.5 7500 18.0 10100

REM209P CB 1100 21.0 7700 18.0 10100

REM209P GREEN DUSTER 20.5 9100 18.0 9900

REM209P TRAPPER 20.5 7900 17.5 10200

CCI 209 REM FIG 8 21.5 7700 18.0 8700

CCI 209 REM TGT 12 21.5 7800 18.0 10200

WIN 209 REM FIG 8 20.5 8600 18.0 9200

WIN 209 REM TGT 12 21.0 8700 18.0 9900

FED209A REM FIG 8 20.0 9000 18.0 10200

FED209A REM TGT 12 20.0 8900 18.0 10900

CCI209M REM FIG 8 20.5 9100 18.0 10000

CCI209M REM TGT 12 20.5 8200 18.0 10400

SHOTSHELL


SHOTSHELL



Improved SOLO 1250


11⁄8Extra

1125

REM209P REM FIG 8 17.5 8300 16.0 6500

Light

REM209P REM RXP 12 17.5 8200 16.0 7200

WIN 209 BLUE DUSTER 18.0 8500 16.0 7400

FED209A REM RXP 12 17.5 8900 15.5 7900

CCI209M REM RXP 12 17.0 9600 16.0 6900

11⁄8 23⁄4 1145

REM209P REM FIG 8 18.0 8400 16.5 7900 18.0 7600

REM209P REM TGT 12 18.0 7200 16.5 8500 18.0 6800

REM209P REM RXP 12 18.0 8800 16.5 9300

REM209P VERSALITE 18.5 7700 16.0 8100 18.0 7000

REM209P P.C. (Red) 18.0 8300 16.5 7200

REM209P BLUE DUSTER 18.5 7600 16.5 7600

REM209P CB 1118 18.5 7600 16.5 7900

REM209P WAA12 18.5 9200 16.5 8600

CCI 209 REM FIG 8 18.5 8300 17.0 7900 18.0 6800

CCI 209 REM TGT 12 18.5 7300 17.0 8000 18.0 7300

CCI 209 REM RXP 12 18.5 7600 17.0 7700 18.0 7300

WIN 209 REM FIG 8 18.0 8200 16.5 7900 18.0 6900

WIN 209 REM TGT 12 18.0 8200 16.5 7800 18.0 7300

WIN 209 REM RXP 12 18.0 8100 16.5 8300 18.0 7100

FED209A BLUE DUSTER 18.0 8500 16.0 8400 18.0 7400

FED209A REM TGT 12 18.0 8700 16.0 8400 18.0 7000

FED209A REM RXP 12 18.0 9200 16.0 9000 18.0 7300

FIO 616 REM FIG 8 18.0 7700 16.5 6900 18.0 6700

CCI209M REM FIG 8 18.0 7000 16.5 7800 18.0 8000

11⁄8 3 1200

REM209P BLUE DUSTER 19.5 8700 17.5 8900 19.5 7700

REM209P REM TGT 12 19.5 9000 17.5 8700 19.5 8100

REM209P REM RXP 12 19.5 9000 17.5 9400 20.0 8400

REM209P VERSALITE 19.5 9000 17.5 9200 19.2 8100

REM209P P.C. (Red) 19.5 9100 17.5 8700 19.7 7600

REM209P WINDJAMMER 20.0 8100 17.5 7700 19.7 7700

REM209P CB 1118 19.5 8200 17.5 9000 19.5 8400

REM209P WAA12 19.5 8800 17.0 10200 19.5 8500

CCI 209 BLUE DUSTER 19.5 8200 18.0 10000 19.3 8400

CCI 209 REM TGT 12 19.5 8100 18.0 9600 19.3 8400

CCI 209 REM RXP 12 19.5 8000 17.5 9700 19.5 8100

WIN 209 REM FIG 8 19.5 9900 17.5 9400 19.2 8600

WIN 209 REM TGT 12 19.5 9500 17.5 9900 19.0 8400

WIN 209 REM RXP 12 19.0 9800 17.5 9700 19.5 8600

FED209A REM FIG 8 19.0 10000 17.5 9800 19.3 8400

FED209A REM TGT 12 19.0 10000 17.0 9600 19.3 8400

FED209A REM RXP 12 19.0 10500 17.0 10000 19.5 8100

FIO 616 BLUE DUSTER 19.5 9400 17.5 9400 19.2 8600

CCI209M REM FIG 8 19.5 8400 17.5 8900 19.2 8800

11⁄8 31⁄4 1255

FED209A REM RXP 12 20.4 10000 24.0 8900

FED209A P.C. (Red) 20.6 9800 24.0 8900

FED209A WINDJAMMER 20.5 10300 24.0 10200

11⁄8 31⁄2 1310

REM209P REM FIG 8 27.5 7700

REM209P REM RXP 12 26.5 8900

REM209P WAA12F114 25.0 8500

REM209P CB 1118 26.0 8500




Improved SOLO 1250


11⁄8 31⁄2 1310

REM209P WINDJAMMER — —

CCI 209 WAA12F114 26.5 8900

WIN 209 WAA12F114 24.5 10400

FED209A WAA12F114 23.5 10300

11⁄4 31⁄4 1220

FIO 209 WAA12F114 22.5 9700

CCISC WAA12F114 22.5 9400

CCI209A WAA12F114 22.5 9800

CCI 209 WAA12F114 22.5 9400

WIN 209 WAA12F114 22.0 10400

12-Ga., 23⁄4-IN. Federal Gold Medal Plastic Target ShellsMin. Overall Length: Max. Crimp Depth:


Improved SOLO 1250


COWBOY ACTION

3⁄4 —

1150 FED209A FED12S0 + 1-135 — — 15.0 4200

1180 FED209A FED12S0 + 1-135 — — 16.0 4300

1250 FED209A FED12S0 + 1-135 — — 17.0 5100

1296 FED209A FED12S0 + 1-135 — — 18.0 5500

1146 FED209A FED12S0 + 1-135 17.0 3900 — —

1217 FED209A FED12S0 + 1-135 18.0 4700 — —

1262 FED209A FED12S0 + 1-135 19.0 5100 — —

1327 FED209A FED12S0 + 1-135 20.0 6200 — —

7⁄8 —

1079 FED209A FED12S0 + 1-135 — — 15.0 4400

1137 FED209A FED12S0 + 1-135 — — 16.0 4900

1212 FED209A FED12S0 + 1-135 — — 17.0 6000

1269 FED209A FED12S0 + 1-135 — — 18.0 6700

1106 FED209A FED12S0 + 1-135 17.0 4700 — —

1169 FED209A FED12S0 + 1-135 18.0 5500 — —

1213 FED209A FED12S0 + 1-135 19.0 6000 — —

1275 FED209A FED12S0 + 1-135 20.0 6900 — —

1 —

1087 FED209A FED 12S0 — — 15.0 5500

1125 FED209A FED 12S0 — — 16.0 5900

1193 FED209A FED 12S0 — — 17.0 6900

1257 FED209A FED 12S0 — — 18.0 7900

1108 FED209A FED 12S0 17.0 5700 — —

1167 FED209A FED 12S0 18.0 6800 — —

1209 FED209A FED 12S0 19.0 7500 — —

1244 FED209A FED 12S0 20.0 7900 — —

11⁄8 —

1062 FED209A FED 12S0 — — 15.0 6600

1113 FED209A FED 12S0 — — 16.0 7400

1172 FED209A FED 12S0 — — 17.0 8700

1216 FED209A FED 12S0 — — 18.0 9500

1108 FED209A FED 12S3 17.0 7800 — —

1130 FED209A FED 12S3 18.0 7900 — —

1182 FED209A FED 12S3 19.0 8700 — —

1223 FED209A FED 12S3 20.0 9600 — —

SHOTSHELL


SHOTSHELL




Improved SOLO 1250



7⁄8 — 1325

CCI 209 FED 12S0 22.0 5900 19.5 6000

FED209A FED 12S0 21.0 7100 18.5 7600

CCI209SC FED 12S0 20.0 7600 19.5 7000

WIN 209 FED 12S0 21.0 7200 19.0 7000

FIO 616 FED 12S0 21.0 7200 19.0 7300

CCI209M FED 12S0 20.5 7300 19.0 7100

1 23⁄4 1200

FED209A FED 12S3 19.0 7500 17.0 7300

FED209A FED 12S0 19.0 7000 17.5 7400 20.0 7400

FED209A BP ITD 19.0 7000 17.5 7100

FED209A REM TGT 12 18.5 6900 17.0 6800

FED209A WINDJAMMER 19.0 6900 17.5 7200

FED209A WAA12SL 18.5 7300 17.0 7000

FED209A GREEN DUSTER 19.0 7000

FED209A ACT T-28 20.0 7500

CCI 209 FED 12S0 20.0 6900 18.5 6500

WIN 209 FED 12S0 19.5 7600 17.5 7400

REM209P FED 12S0 19.5 6700 18.5 6700

FIO 616 FED 12S0 19.5 8200 17.0 7200

CCI209M FED 12S0 19.0 8300 17.0 7100

1 31⁄4 1290

FED209A FED 12S3 21.0 9200 19.0 9100

FED209A FED 12S0 21.0 9500 18.5 9000

FED209A BP ITD 21.0 8500 19.0 8100

FED209A REM TGT 12 21.0 8700 18.5 8700

FED209A REM FIG 8 21.0 8500 19.0 8100

FED209A WAA12SL 21.0 9500 19.0 9000

FED209A GREEN DUSTER 21.5 8800

FED209A ACT T-28 22.0 8100

CCI 209 FED 12S0 22.0 8500 20.0 8900

WIN 209 FED 12S0 21.5 9200 19.0 9100

REM209P FED 12S0 22.0 8200 20.0 8900

FIO 616 FED 12S0 22.0 9500 19.0 9300

CCI209M FED 12S0 21.5 9100 19.0 9200

11⁄8Extra

1125

FED209A FED 12S3 18.0 7100 16.0 7800 17.8 5900

Light

FED209A FED 12C1 18.0 7100

FED209A VERSALITE 18.0 7600

FED209A P.C. (Red) 18.0 7400

FED209A WINDJAMMER 18.5 6500 16.3 7300 17.8 6400

FED209A CB 1118 17.0 7400 16.0 7200

FED209A REM FIG 8 17.0 7100 16.5 7100

FED209A UNIWAD 17.0 7100

FED209A BLUE DUSTER 17.0 7200

FED209A ACT TG-30 18.5 8200 18.0 6600

CCI 209 FED 12S3 18.5 7300 16.5 6900 18.0 6600

WIN 209 FED 12S3 18.5 7900 16.0 6600 18.0 7000

REM209P FED 12S3 18.5 7400 16.5 6200 18.5 6100

FIO 616 FED 12S3 18.0 7500 16.5 6600 18.0 6600

CCI209M FED 12S3 18.0 8100 16.5 6700 18.0 7000

11⁄8 23⁄4 1145 FED209A FED 12S3 18.5 8000 16.5 8300 18.2 6800





Improved SOLO 1250


11⁄8 23⁄4 1145

FED209A FED 12S0 18.0 8100 16.5 8600 18.2 7200

FED209A FED 12C1 18.5 8700 17.0 8000

FED209A VERSALITE 18.5 8300 16.0 8000

FED209A P.C. (Red) 19.0 8400 16.5 7000

FED209A WINDJAMMER 19.0 7300 16.5 7600 18.2 7000

FED209A CB2118 18.5 7700 16.5 7600

FED209A REM FIG 8 18.5 7700 17.0 7700

FED209A BP ITD 18.0 7400 16.5 7800

FED209A BLUE DUSTER 18.5 8400 16.0 7200

FED209A ACT TG-30 19.0 8500 16.5 8700 18.2 7400

CCI 209 FED 12S3 19.0 7600 17.5 7000 18.5 6700

WIN 209 FED 12S3 19.0 8000 17.5 7200 18.2 7400

REM209P FED 12S3 19.0 8000 17.5 7100

FIO 616 FED 12S3 18.5 7800 17.5 7200 18.2 6700

CCI209M FED 12S3 18.5 8300 17.5 7400 18.2 7200

11⁄8 3 1200

FED209A FED 12S3 19.5 9700 17.5 8800 19.8 7700 22.7 7200

FED209A FED 12S0 19.0 9200 17.5 9500 20.0 8800 22.5 7600

FED209A FED 12C1 19.5 9200 17.5 8800 22.5 6900

FED209A VERSALITE 19.0 9300 17.0 8700 22.5 7500

FED209A P.C. (Red) 19.5 8400 18.0 8300 23.0 6800

FED209A WINDJAMMER 20.5 7900 18.0 8500 19.7 7600 22.5 7100

FED209A CB2118 19.0 9300 17.5 8800 22.5 7000

FED209A REM FIG 8 19.0 9000 17.5 8100 23.0 6700

FED209A BP ITD 19.5 8800 17.5 8700 22.5 7000

FED209A BLUE DUSTER 19.0 10000 18.0 8500 22.5 7500

FED209A ACT TG-30 20.0 9600 17.5 9200 19.7 8400 22.5 7600

CCI 209 FED 12S3 20.0 8700 18.5 8000 19.7 8000 23.0 6400

WIN 209 FED 12S3 20.0 8700 18.5 8500 19.7 7900 23.0 7100

REM209P FED 12S3 20.0 8600 18.5 8300 20.0 7200

FIO 616 FED 12S3 20.0 8700 18.5 8500 19.7 7400 23.0 7300

CCI209M FED 12S3 19.5 9400 18.5 8700 19.5 8000 22.5 7100

11⁄8 31⁄4 1255

FED209A FED 12S3 20.5 10200 18.5 10500 20.8 9000 23.5 8000

FED209A FED 12C1 20.5 10500 18.5 10000 23.5 8100

FED209A VERSALITE 20.0 10200 18.5 10200 23.5 8000

FED209A P.C. (Red) 20.5 9600 19.0 9400 24.0 7500

FED209A WINDJAMMER 22.0 8700 18.5 9100 21.2 8300 23.5 7700

FED209A CB2118 20.0 10700 18.5 10100 21.2 8500 23.5 7900

FED209A REM FIG 8 20.0 10300 19.0 9600 21.3 8200 23.5 7200

FED209A BP ITD 20.5 9700 19.0 10200 24.0 7700

FED209A BLUE DUSTER 20.0 10600 18.5 9700 23.5 7800

FED209A ACT TG-30 21.5 10700 18.5 10600 21.2 9400 23.5 7700

CCI 209 FED 12S3 21.5 10200 19.5 9700 21.2 8900

WIN 209 FED 12S3 21.5 9700 19.5 10200 20.5 8900 23.5 8000

REM209P FED 12S3 21.5 9600 19.0 10000

FIO 616 FED 12S3 21.5 9500 19.5 10200 21.0 8800 23.5 7600

CCI209M FED 12S3 21.0 10700 19.5 10900 21.0 8800 23.5 7500

11⁄8 31⁄2 1310

FED209A FED 12S3 22.0 10000 25.0 9100

FED209A FED 12C1 25.0 9200

FED209A ACT TG-30 25.0 8600

SHOTSHELL


SHOTSHELL




Improved SOLO 1250


11⁄8 31⁄2 1310

FED209A BLUE DUSTER 25.0 8900

FED209A REM RXP 12 25.5 8500


FED209A CB2118 25.0 8400

FED209A WINDJAMMER 25.5 8200

CCI209SC FED 12S3 22.0 10700 25.0 8100

WIN 209 FED 12S3 22.0 10200 25.5 9600

FIO 616 FED 12S3 22.0 10500 25.0 9100

CCI209M FED 12S3 22.0 10300 25.0 8600

11⁄4 31⁄4 1220

FED209A FED 12S4 23.0 9700

FED209A FED 12C1 24.0 8600

CCI 209 FED 12S4 24.5 8200

WIN 209 FED 12S4 24.0 8800

CCI209M FED 12S4 23.5 9500

11⁄4 31⁄2 1275 FED209A FED 12S4 25.0 10500

12-Ga., 23⁄4-IN. Federal Champion Paper Target ShellsMin. Overall Length: Max. Crimp Depth:


Improved SOLO 1250


7⁄8 — 1325

CCI 209 FED 12S0 22.5 5800 20.5 6300

FED209A FED 12S0 22.0 6700 19.5 6800

REM209P FED 12S0 22.5 6900 20.5 6600

WIN 209 FED 12S0 21.0 7200 19.5 6400

FIO 616 FED 12S0 21.0 7400 20.0 6400

CCI209M FED 12S0 21.0 7200 20.0 6400

1 23⁄4 1200

FED209A FED 12S3 19.0 6600 17.5 6600

FED209A WAA12 19.0 5500 17.5 6800

WIN 209 FED 12S3 19.0 6500 17.5 6400

FIO 616 FED 12S3 19.0 6800 17.5 6800

CCI209M FED 12S3 19.0 6700 17.5 6500

1 31⁄4 1290

FED209A FED 12S3 21.0 9000 19.5 8600

FED209A WAA12 20.5 7500 19.0 8400

WIN 209 FED 12S3 21.0 8300 19.0 8600

FIO 616 FED 12S3 21.0 8600 19.0 8100

CCI209M FED 12S3 21.0 9000 19.0 7900

11⁄8 23⁄4 1145

FED209A FED 12C1 19.0 7500 17.0 7500 20.0 9200

FED209A FED 12S4 18.0 8500 16.5 8200 19.0 7000

FED209A WAA12 18.0 7900 16.5 7800

FED209A BP TRAP C 18.5 8200 17.0 7800

FED209A HAWK II 18.0 8200 17.0 7600

WIN 209 FED 12C1 19.0 7900 17.0 6700

FIO 616 FED 12C1 19.0 8100 17.5 6300

CCI209M FED 12C1 18.5 7600 17.5 7200

11⁄8 3 1200

FED209A FED 12C1 20.0 8800 18.5 8700

FED209A FED 12S4 19.0 9800 17.5 9700 19.5 8000

FED209A WAA12 19.5 9500 18.0 9000

FED209A BP TRAP C 19.5 9100 18.0 8900



12-Ga., 23⁄4-IN. Federal Champion Paper Target ShellsMin. Overall Length: Max. Crimp Depth:


Improved SOLO 1250


11⁄8 3 1200

FED209A HAWK II 19.0 8800 18.0 8900

WIN 209 FED 12C1 20.0 8900 18.0 8000

FIO 616 FED 12C1 20.0 8200 18.5 8000

CCI209M FED 12C1 19.5 8900 18.0 8500

11⁄8 31⁄4 1255

FED209A FED 12C1 22.0 10100 20.0 10500

FED209A FED 12S4 20.5 10800 19.0 11300 20.5 9800

FED209A WAA12 20.5 10500 19.0 10000 23.5 7500

FED209A BP TRAP 20.5 10900 19.0 9900 24.5 7800

FED209A HAWK II 20.0 9600 19.0 9500 25.0 7500

WIN 209 FED 12C1 21.0 10000 19.0 9200 25.0 7600

CCI209M FED 12C1 21.0 9600 19.0 8700 25.0 7700

11⁄8 31⁄2 1310

FED209A FED 12C1 26.0 8000

FED209A WAA12F114 26.0 9200


CCI 209M FED 12C1 25.5 8100

WIN 209 FED 12C1 25.5 8000

FIO 616 FED 12C1 26.0 7300

FED209A HAWK II 26.0 8100

11⁄4 31⁄4 1220

FED209A FED 12S4 24.0 8000

FED209A WAA12F114 24.0 9300

FED209A REM RP12 24.0 8500

CCI 209 FED 12S4 24.5 8300

WIN 209 FED 12S4 24.0 9400

FIO 616 FED 12S4 24.0 9200

CCI209M FED 12S4 24.0 9300

11⁄4 31⁄2 1275 FED209A FED 12S4 25.0 9700

12-Ga., 23⁄4-IN. Fiocchi Target ShellsMin. Overall Length: Max. Crimp Depth:


Improved SOLO 1250


7⁄8 — 1325

CCI209SC BP 078 20.0 7600 18.5 7700

FED209A BP 078 19.5 8100 18.0 8500

WIN 209 BP 078 20.0 8000 18.0 7700

FIO 616 BP 078 20.0 7700 18.5 8100

CCI209M BP 078 20.5 7400 18.5 8000

1 23⁄4 1200

FIO 616 FED 12S0 19.0 7800 17.0 8100

WIN 209 FED 12S0 19.5 6500 17.0 7200

REM209P FED 12S0 20.0 6900 17.0 7100

FED209A FED 12S0 18.5 8000 17.0 8500

CCI209M FED 12S0 19.0 7600 17.0 7400

1 31⁄4 1290

FIO 616 FED 12S3 20.5 10500 18.5 9900

WIN 209 FED 12S3 20.0 11400 18.5 8800

REM209P FED 12S3 21.5 9700 18.5 8800

FED209A FED 12S3 20.0 10700 18.5 10300

CCI209M FED 12S3 20.5 9900 18.5 8900

11⁄8Extra

1125FIO 616 FED 12S3 18.0 7300 15.5 8000

Light FIO 616 Super Hawk 17.5 7400 15.5 8000

SHOTSHELL


SHOTSHELL


12-Ga., 23⁄4-IN. Fiocchi Target ShellsMin. Overall Length: Max. Crimp Depth:


Improved SOLO 1250


11⁄8Extra

1125

WIN 209 FED 12S3 17.5 7500 15.5 7300

Light

WIN 209 Super Hawk 17.0 7800 15.5 7300

REM209P FED 12S3 18.5 6100 16.0 7800

REM209P Super Hawk 17.5 7200 16.0 7600

FED209A FIOTL1 17.5 8200 15.5 8800

FED209A Super Hawk 17.5 8300 15.5 8400

CCI209M FIOTL1 18.5 7000 15.5 8000

CCI209M Super Hawk 18.5 7900 16.0 7500

11⁄8 23⁄4 1145

FIO 616 FIOTL1 18.5 8200 16.5 8100 18.0 9800

FIO 616 Super Hawk 18.0 7900 16.0 8100

WIN 209 FIOTL1 18.0 7900 16.5 8300

WIN 209 Super Hawk 18.0 8400 16.0 7900

REM209P FIOTL1 19.0 7300 16.5 8000

REM209P Super Hawk 18.0 7600 16.5 7900

FED209A FIOTL1 18.5 8400 16.5 9300

FED209A Super Hawk 18.5 8600 16.0 9100

CCI209M FIOTL1 18.5 7800 16.5 9100

CCI209M Super Hawk 18.0 8200 16.5 8000

11⁄8 3 1200

FIO 616 FIOTL1 19.5 9200 17.5 9100 19.0 10700 22.0 7400

FIO 616 WAA12 19.0 9000 17.5 9000 22.0 7300

WIN 209 FIOTL1 20.0 7900 17.5 8900 22.0 7600

WIN 209 WAA12 19.0 9900 17.5 9900 22.0 7400

REM209P FIOTL1 20.0 8000 17.5 9100

REM209P REM RXP 19.5 8100 17.5 9000

FED209A FIOTL1 19.5 10900 17.5 10500 22.0 7500

FED209A WAA12 18.5 9600 17.0 9900 22.0 7600

CCI209M FIOTL1 19.5 8800 17.5 10300 22.5 6900

CCI209M WAA12 19.0 8700 17.5 9600 22.5 7200

11⁄8 31⁄4 1255

FIO 616 FED 12S3 21.0 9100 18.5 10900 23.0 8200

FIO 616 ACT TG-30 21.0 9000 18.5 10800

WIN 209 FED 12S3 21.0 9100 18.5 10700 22.5 8400

FED209A FED 12S3 21.0 9400 22.5 8700

11⁄8 31⁄2 1310

FIO 616 FIOTL1 24.0 9700

FIO 616 FED 12C1 24.0 9200

WIN 209 WAA12F114 23.5 10000

WIN 209 FIOTL1 24.0 10000

FED209A FIOTL1 23.5 9500

FED209A WAA12F114 23.5 10000

REM209P WAA12F114 25.0 9100

REM209P FED 12C1 25.0 7900

CCI209M FED 12C1 23.5 9500

11⁄4 31⁄4 1220

FIO 616 FED 12C1 23.0 7900

WIN 209 FED 12C1 23.0 8900

WIN 209 WAA12F114 23.0 9900

FED209A FED 12C1 23.0 8900

11⁄4 31⁄2 1275

FIO 616 FED 12C1 24.5 9900

FIO 616 WAA12F114 24.5 10600

FIO 616 WAA12R 24.5 9100

CCI209SC WAA12F114 25.0 10600

WIN 209 FED 12C1 24.5 9600

FED209A FED 12C1 24.5 10500



16-Ga., 23⁄4-IN. Shotshell Target and Field LoadsMin. Overall Length: Max. Crimp Depth:


Improved SOLO 1250

Dram Approx. Approx. Approx. Approx. Approx.Shell Ounces Primer Wad Grains Grains Grains GrainsEquiv- Velocity, Pressure Pressure Pressure PressureBrand Lead Type Type Wt. Wt. Wt. Wt.alent Ft./Sec. PSI PSI PSI PSI

FED

1 21⁄2 1165

FED209A AA16 + 1-135 16.0 10500 14.5 9700 18.5 8000

FIELD&

HI-P

WIN 209 AA16 + 1-135 16.0 9700 15.0 9800 19.0 7400REM209P SP16 + 1⁄4 17.5 8800 15.0 8700 20.0 7600CCI 209 AA16 + 1-135 17.5 9100 15.0 8900 19.0 8500

FED209A BPSP16 18.5 7300

1 23⁄4 1220

FED209A AA16 + 1-135 17.0 11100 16.0 10900 19.0 9300WIN 209 AA16 + 1-135 17.0 11200 16.5 10200 20.0 8300

REM209P SP16 + 1⁄4 18.0 11500 15.5 10000 22.0 8900CCI 209 AA16 + 1-135 — — 15.5 10000 20.0 8900

FED209A BPSP16 — — 20.0 8900

11⁄8 23⁄4 1185FED209A WAA16 19.5 10600WIN 209 WAA16 20.0 9500

WIN

1 21⁄2 1165

FED209A WAA16 17.0 9200

AA

WIN 209 WAA16 17.0 9500REM209P WAA16 17.5 7800CCI 209 WAA16 17.0 7800

1 23⁄4 1220

FED209A WAA16 18.5 10600WIN 209 WAA16 18.5 10700

REM209P WAA16 18.5 9300CCI 209 WAA16 18.5 10100

11⁄8 23⁄4 1185FED209A REMSP16 18.5 10700WIN 209 REMSP16 19.5 9800

ACTIV

1 21⁄2 1165FED209A AA16 + 1-135 15.0 10500 15.0 10700 17.5 6000WIN 209 AA16 + 1-135 15.5 10900 15.0 10100 17.5 6000CCI 209 AA16 + 1-135 15.5 10300 15.5 9600 19.0 6500

1 23⁄4 1220FED209A AA16 + 1-135 20.0 8400WIN 209 AA16 + 1-135 20.0 8000CCI 209 AA16 + 1-135 20.0 8300

11⁄8 23⁄4 1185FED209A WAA16 19.0 9600WIN 209 WAA16 19.0 9200

20-Ga., Cowboy Action Loads SOLO 1000 NITRO 100Approx. Approx. Approx.Shotshell Ounces Primer Grains GrainsVelocity Wad Pressure PressureBrand Lead Type Wt. Wt.Ft./Sec. PSI PSI

WIN3⁄4

1037 WIN 209 WAA20 — — 9.5 7400AA 990 WIN 209 WAA20 10.4 7100 — —

REM3⁄4

1021 REM 209 WAA + 1-135 — — 9.5 7400RXP 1030 REM 209 WAA + 1-135 10.5 7600 — —FED

3⁄41072 FED209A WAA + 1-135 — — 10.5 7500

HI-P 1042 FED209A WAA + 1-135 11.0 7400 — —

SOLO 125020-Ga., 23⁄4-IN. Shotshell Target and Field LoadsDram Approx. Grains Approx.Shotshell Ounces Primer WadEquiv- Velocity Solo PressureBrand Lead Type Typealent Ft./Sec. 1250 PSI

Winchester AA7⁄8 21⁄4 1155

WIN 209 WAA20 14.0 11400

(one-piece)8-point crimp

WIN 209 REM RXP 20 14.5 10300WIN 209 P.C. 20 14.5 9900

7⁄8 SKEET 1200WIN 209 P.C. 20 15.5 11800WIN 209 WAA20F1 15.0 12000WIN 209 REM RXP 20 15.5 11500

SHOTSHELL


SHOTSHELL


20-Ga., 23⁄4-IN. Shotshell Target and Field Loads SOLO 1250

Dram Approx. Grains Approx.Shotshell Ounces Primer WadEquiv- Velocity Solo PressureBrand Lead Type Typealent Ft./Sec. 1250 PSI

Winchester 7⁄8 21⁄4 1155

WIN 209 WAA20 17.5 10200

Dove & Quail(polyformedwith plasticbase wad)

6-point crimp

WIN 209 WAA20F1 17.5 9000WIN 209 REM RXP 20 17.5 8900WIN 209 P.C. 20 17.0 9300WIN 209 WINDJAMMER 16.5 10000

CCI 209 WAA20 16.5 8800

REM209P WAA20 16.5 9300

FED209A WAA20 16.0 9400

7⁄8 SKEET 1200

WIN 209 WAA20 18.5 10700WIN 209 REM RXP 20 18.5 10800

CCI 209 WAA20 18.5 10800

REM209P WAA20 18.5 10400

Remington RXP7⁄8 21⁄4 1155

REM209P REM RXP 20 16.0 10200

(one-piece)8-point crimp

REM209P REM SP20 16.0 10000REM209P WAA20 16.0 10800REM209P WINDJAMMER 16.0 10400REM209P REM RXP 20 17.0 11200

WIN 209 REM RXP 20 17.0 11400

FED209A REM RXP 20 17.0 11400

Federal 7⁄8 21⁄4 1155

FED209A FED 20S1 18.0 8900

Hi-Powerand Target(two-piecewith plasticbase wad)

6-point crimp

FED209A REM RXP 20 18.5 8700FED209A P.C. 20 18.5 8800FED209A WINDJAMMER 18.0 9100FED209A W-28 18.5 8400

CCI 209 FED 20S1 18.5 8900

WIN 209 FED 20S1 18.0 9100

7⁄8 SKEET 1200

FED209A FED 20S1 19.0 9900FED209A REM RXP 20 19.5 10400FED209A P.C. 20 19.5 10100

CCI 209 FED 20S1 19.5 10400

WIN 209 FED 20S1 19.0 10500

ACTIV

7⁄8 21⁄4 1155

WIN 209 W-28 17.5 8700

Industries6-point crimp

WIN 209 P.C. 20 18.0 8900WIN 209 WINDJAMMER 17.5 9200

CCI 209 W-28 18.0 9400

FED209A W-28 17.5 9900

7⁄8 SKEET 1200

WIN 209 W-28 18.5 10600WIN 209 P.C. 20 19.0 10400WIN 209 WINDJAMMER 18.5 10800

CCI 209 W-28 19.0 10400

FED209A W-28 18.5 10300



28-Gauge Shotshell Target Loads SOLO 1250 No. 5Dram Approx. Approx. Approx.Shotshell Ounces Primer Wad Grains GrainsEquiv- Velocity Pressure PressureBrand Lead Type Type Solo Soloalent Ft./Sec. PSI PSI

REMINGTON3⁄4 SKEET 1155 REM 209

REM PT 28 13.0 10700

PREMIER

P.C. 12.5 11000BP Sporting* 12.5 9900

3⁄4 SKEET 1200 REM 209REM PT 28 13.5 12000

P.C. 13.5 11900BP Sporting* 13.0 10400

FEDERAL3⁄4 SKEET 1155 CCI 209

BP Sporting* 13.0 11400FED 28S1 13.0 12500

3⁄4 SKEET 1200 REM 209 BP Sporting* 13.5 10300

WIN3⁄4 SKEET 1155 WIN 209 REM PT 28 12.5 122003⁄4 SKEET 1200 WIN 209 WAA 28 16.5 11800

*Note: BP Sporting Wad used with 11⁄16 oz. No. 9 only.

.410-BORE, 21⁄2-IN. PLASTIC SHELLS 4100Shotshell Ounces Velocity, Approx.Primer Wad Grains*Brand Lead FPS PSI

FEDERAL OR1⁄2 1200

FED209A WAA41 13.5 9400

REMINGTONFED209A REM SP410 13.5 9700FED209A P.C. 13.5 9600

WINCHESTER AA 1⁄2 1200

FED209A P.C. 13.5 10700FED209A REM SP410 13.5 11100FED209A WAA41 13.5 11200FED209A FC410SC 13.5 12600

*4100: 13.5 gr requires MEC #11 Bushing.

12-Gauge 23⁄4" Shotshell Slug Data No. 2 No. 5Lee Drive Key Slug ImprovedApprox. Approx.Shotshell Slug Wt. Velocity Grains GrainsPrimer Wad Pressure PressureBrand Ounces Ft./Sec. Wt. Wt.PSI PSI

ACTIV 7⁄8 oz. 1501 WIN 209 ACTIV TG-30 + .135 NITRO CARD 25.5 10300 — —ACTIV 7⁄8 oz. 1593 WIN 209 ACTIV TG-30 + .135 NITRO CARD — — 40.0 10700ACTIV 1 oz. 1553 WIN 209 ACTIV TG-30 — — 41.5 10300

Fed G.M. 7⁄8 oz. 1509 WIN 209 ACTIV TG-30 + .070 NITRO CARD 25.5 9700 — —Fed G.M. 7⁄8 oz. 1638 WIN 209 ACTIV TG-30 + .135 NITRO CARD — — 42.0 10200Fed G.M. 1 oz. 1529 WIN 209 FED 12S3 — — 41.5 9100

Rem STS 7⁄8 oz. 1466 WIN 209 ACTIV TG-30 22.5 10700 — —Rem STS 1 oz. 1535 WIN 209 WAASL — — 38.5 10800

WIN AA 7⁄8 oz. 1492 WIN 209 ACTIV TG-30 25.0 10000 — —WIN AA 7⁄8 oz. 1608 WIN 209 ACTIV TG-30 — — 40.0 10800WIN AA 1 oz. 1494 WIN 209 WAA — — 38.5 9700

SHOTSHELL


SHOTSHELL


20-Gauge 23⁄4" Shotshell Slug Data No. 5 No. 7Lee Drive Key SlugApprox. Approx.Shotshell Slug Wt. Velocity Grains GrainsPrimer Wad Pressure PressureBrand Ounces Ft./Sec. Wt. Wt.PSI PSI

ACTIV 3⁄4 oz. 1569 WIN 209 FED 20S1 + .250" FELT WAD — — 32.0 11900

FED TGT 3⁄4 oz. 1492 WIN 209 FED 20S1 + .250" + .125" 26.0 11900 — —

REM TGT 3⁄4 oz. 1518 WIN 209 FED 20S1 + .500" CORK WAD — — 30.0 11500

WIN AA 3⁄4 oz. 1565 WIN 209 FED 20S1 + .250" FELT WAD — — 32.0 11900


A QUICK GUIDE TO SHOTSHELL PRIMERS(Approximately in Increasing Order of Strength)

Abbreviation Manufacturer/Supplier Comments

REM 209P (STS) Remington Arms Corp. A medium primer, well-suited to the Scotpowder line but may require a slightly highercharge weight of propellant than hotter primersfor equal ballistics.

CCI 209 Blount Industries A medium strength primer. Suitable for usewith all Scot powders. Do not confuse with theCCI 209M which is hotter.

WIN 209 Olin-Winchester Div. A medium strength primer. Suitable for usewith all Scot powders.

CHED 209 Cheddite Very similar to Winchester 209 primers in ourtesting.

FIO 616 Fiocchi SPA/Italy A ‘‘magnum’’ strength primer. The 616 is of aslightly larger diameter. It is suitable for usewith all Scot powders.

CCI209M Blount Industries A ‘‘magnum’’ strength primer, suitable for usewith all Scot powders. This primer will producehigher pressures than the CCI 209.

FED209A Federal Cartridge Co. A ‘‘magnum’’ strength primer developed byFederal as a replacement for their FED 209.This primer is much more powerful and mustnot be directly substituted for the FED 209 asexcessive pressure will result.

63

accurate smokeless powder - david's reloading...

Documents