7521 hwy 35 north po box 219 bassfield, ms 39421 943 …

7521 Hwy 35 North.**P.O. Box 219**Bassfield, MS 39421

DFI Construction, Inc. CONSTRUCTION & INSPECTION

“Quality with Pride”

7521 Hwy 35 North PO Box 219

Bassfield, MS 39421 601-943-6817 601-943-6266

www.dficon.com



INDUSTRIAL CONSTRUCTION

MANAGEMENT & CONSULTING

API 510, API 570, API 571, API 653, STI INSPECTIONS

CWI, NACE Level 3, CP-1

MAINTENANCE

PIPING FABRICATION

MISCELLANEOUS STEEL FABRICATION * Supplier Diversity: DFI Construction, Inc has been approved, through the Small Business Association (SBA), as a “qualified HUBZone small business concern(SBC). As such, our firm is eligible for HUBZone opportunities. Original Certifiation Date 09/15/2015, HUBZone Certificaiton No. 53406. DFI Construction, Inc., through planning, administration, and monitoring has maintained and accident free work site throughout the years. Safety is of the highest priority in all DFI oper-ations. All DFI employees must participate and cooperate with DFI‘s construction safety program as a requirement of their employment. Consistent compliance with this program, along with all other applicable local, state, and federal programs is not an option. It is a necessity. Our commitment to safety has earned DFI Construction the Executive Level CEO Safety Leadership Award in 2004. Several hundred contractors competed for this award and only one attained this pinnacle in safety. It was DFI Construction. This award was for achieving a leadership position in safety and health among all Down- stream contractors for MOTIVA Enterprises.

DFI Construction requires employees to obtain and maintain the Transportation Worker Identification Credential (TWIC). TWIC is administered by the Transportation Security Ad-ministration (TSA) and U.S. Coast Guard. DFI Construction also meets the criteria of supplier prequalification services, such as PICS, ISNetworld and CVM Solutions, as well safety orientation and verification programs, such as Power Safe Training.



Hydro-testing DFI Construction has been involved in the hydro-testing of fuel oil and process piping for vari-ous clients throughout the United States. All testing was done in accordance with industry stand-ards. We also have the knowledge and capabilities of implementing hydro-test packages for new construction projects necessary for the completion of said projects. API 653 / STI SP001 Tank Inspections: DFI Construction has the capability of performing API 653 Tank inspections, Magnetic Flux Leakage floor scanning, ultrasonic thickness survey of shell, roof, and nozzles, and tank repairs according to current API 653 standards. This includes annual visual inspections, 5-year In-Service, and Out-of-Service internal inspections of aboveground storage tanks. API 570 Piping Inspections: DFI Construction has the capability of performing API 570 piping inspections with ultrasonic thickness survey of all process piping. DFI also has access to the piping inspection technique known as Guided Wave, which can be utilized to help inspect piping under insulation and under-ground piping. API 510 Pressure Vessel Inspections: DFI Construction has the capability of performing API 510 pressure vessel inspections on all pressure vessels built per ASME Section VIII. This includes vessels such as hydrogen tanks, air receivers, and anhydrous ammonia vessels. NACE III and I Coating Inspections: DFI has the capability to perform NACE coating application inspections. This includes holiday detection and 3rd-party witnessing of holiday detections, dry and wet film thickness readings, and coating application monitoring/documentation. API 571 Corrosion and Damage Mechanisms Professional on staff. CWI Certified Welding Inspector and CP-1 (cathodic protection) on staff. General Plant Maintenance Since its inception in 1999, DFI Construction has been involved in general plant maintenance, which has covered basically all phases of plant operations. Some of these are listed below:

Repair of underground process lines.

Installation of new piping and associated structural steel

Erection of steel buildings.

Pumping out fuel oil tanks and installation of truck loading facilities.

Construction of structural steel platforms, concrete foundations, installation of contain-ment areas, maintaining dock facilities, and removal of brush and debris.



Fabrication DFI Construction has a new state of the art 7500 sq ft fabrication facility that specializes in all types of metal fabrication which include the following:

Miscellaneous pipe supports

Miscellaneous steel fabrication

Piping handrail fabrication

Angle handrail fabrication

Small bore piping fabrication

Large bore piping fabrication

Vessel trim fabrication

Project Management and Construction The owners of DFI Construction have been involved in various projects throughout the world for various contractors in management positions. These positions have ranged from Foreman to Project Superintendent. Many of the jobs were completed from the grass roots construction to the completing of the hydro-test packages and punch lists. We believe we have the capabilities to assist the larger companies in maintaining a job direction or Quality Assurance program from a third party perspective. In conclusion, DFI Construction consists of people with the knowledge and capabilities of being an asset to any phase of a construction or maintenance project. Mark E. Fails/President



Contact Information

Mailing Address: PO Box 219 Physical Address: 7521 Hwy 35 North

Bassfield, MS 39421 Ph: 601-943-6817 * Fax: 601-943-6266

- Bobby T. Davis: - Head of Fabrication Department, - Vice President and Owner

Phone: 601-310-0071 Email: [email protected]

- Mark E Fails

- Certified Welding Inspector (CWI) - API 653 Aboveground Storage Tank Inspector - API 570 Piping Inspector - API 510 Pressure Vessel Inspector - API 571 Inspector - STI SP001 Aboveground Storage Tank Inspector - NACE Coating Inspector, Level III - CP-1 Inspector - President and Owner

Phone: 601-310-4801 Email: [email protected]

- Philip A Fails - Vice President and Owner Phone: 601-310-4738 Email: [email protected]



JOB LISTINGS

The following are a sample of the jobs that have been completed by DFI Construction over the last three years. If there are any questions please feel free to call me at one of the following numbers: 601-310-4801 cell or 601-943-6817 office. Our jobs have ranged individually from $2,000 to over 1 Million Dollars. This proves our willingness to work regardless of the size of the job.

Pigging of Jet Line at Shell Kenner Terminal

Fabricate and Install Valve Access Platforms for Plains All American Pipe-line

Phase IV Tank Inspection at Entergy Gerald Andrus Plant

Annual Hydrostatic Testing at Various Entergy Facilities and Preventive Maintenance

Install Vapor Recovery Units at Shell Fuel Terminal

API 510, API 570, API 653 Tank and Piping Inspections at Hunt Sanders-ville Facility

Cooling Pond Repairs/ Erosion Control at Lake Hico

Develop temporary Piping system for Product Transfer for tank product conversion/ Perform Tank Repairs/ Reinstate Tanks at Collins Terminal

Removal of Internal Floating Roof in Storage Tanks

Transfer Fuel from Cleveland Terminal



XX

7521 hwy 35 north po box 219 bassfield, ms 39421 943 …

Documents