Check out our website for new product updates www.winchhire.com.auCheck out our website for new product updates www.winchhire.com.au

35 Boron Street Sumner Park Brisbane Q 4074 PO Box 509 Sumner Park Brisbane Q 4074

Telephone 07 3376 2888 Facsimile 07 3376 8672 Email info@winchhire.com.au

A division of Impact Supplies (Australia) Pty Ltd ABN 90 522 753 Printed April 2012

Rollers and Guides

45 Fold base curved roller.

140mm wide ball bearing roller

46 Dog bone roller, flat base, with/out tray legs for cable tray use.

140mm wide ball bearing roller

47 Fold base flat roller.

135mm wide roller with nylon bush

48 Split duct quad rollers for guiding cables into conduit in any direction or angle.

Sizes: 100mm, 125mm

49 Trench/pit pivoting slipper guide.

Suit cables up to 100mm diameter

50 Trench/pit twin roller guide.

Suit cables up to 140mm diameter

51 Cable snatch block, side opening.

Suit cables up to 80mm diameter

52 Conduit slipper guide (inlet), aids damage free entry of cable(s) into conduit.

Sizes: 50mm, 80mm, 100mm, 125mm, 150mm

53 Split duct roller guides to aid cable exit from conduit.

Sizes: 50mm, 63mm, 80mm, 100mm, 125mm, 150mm

54 Corner trench roller for ground trench cable installations.

Suit cables up to 160mm diameter

55 Cable tray rollers for horizontal and vertical directional change.

Suit cables up to 50mm diameter

56 Three roller 45 degree bend and four roller 90 degree bend frames.

Suit cables up to 125mm diameter

Check out our website for new product updates www.winchhire.com.au

Optic Fibre Cable Hauling Winches

Cable Drum Trailers

40 41 42Cable drum trailer (Jinker), 600kg, hydraulic self loading.

Max drum diameter: 1400mm Max drum width: 1300mm

Cable drum trailer (Jinker), 1T, manual self loading system, manual rear stabilizer legs.

Max drum diameter: 2050mm Max drum width: 1500mm

Cable drum trailer (Jinker), 1.5T, hydraulic self loading and drum drive systems with hydraulic stabilizer legs.

Max drum diameter: 1800mm Max drum width: 1200mm

43 61 44Cable drum trailer (Jinker), 3T, hydraulic self loading and drum drive systems with hydraulic stabilizer legs.

Max drum diameter: 2100mm Max drum width: 1500mm

Triple drum trailer (Jinker), 1.7T, manual loading with drum drive system. Twin drum trailers also available.

Max drum diameter: 1300mm Max drum width: 900mm

Cable drum trailer (Jinker), 6.5T, hydraulic self loading and drum drive systems with hydraulic stabiliser legs.

Max drum diameter: 2700mm Max drum width: 1550mm

18 19Hydraulic trailer mounted optic fibre cable hauling winches available either petrol or diesel.

Fibre optics certified and road registered

Diesel/hydraulic Land Cruiser mounted optic fibre cable hauling winch.

Fibre optics certified and road registered

For your next optic fibre handling project, our optic fibre winches are available for short or long term hire. All units are fitted with electronic distance measuring equipment and safety screens for operator protection. They are available trailer mounted, Land Cruiser mounted or skid mounted to suit your requirements.

400KG TO 6.5 TONNE

June 2012

Available for HireCABLE HANDLING EQUIPMENT

ESTABLISHED SINCE 1996

8359_WINHA CABLE HANDLING BROCHURE.indd 1 24/05/12 2:31 PM

Check out our website for new product updates www.winchhire.com.au Comprehensive range of dies available to suit our cable cutters and crimpers.

Cable Hauling and Lifting Winches200KG TO 25 TONNE

57

3 Electric winches ranging in size from 200kg up to 10 tonne for pulling and lifting.

Line pull: from 200kg up to 10T Line speed: up to 20m per minute Rope capacity: 200m to 1000m

Trailer mounted bull wheel winches designed to haul cable through ducts using a double bull wheel configuration with storage wheel.

Line pull: up to 3T. Line speed: up to 15m per minute. Rope capacity: up to 1000m

1 Petrol and diesel capstan winches complete with safety screen.

Line pull: 500kg to 2.5T Line speed: up to 14m per minute Petrol motor size: 4hp to 13hp

2 240V electric capstan winches complete with safety screen.

Line pull: 500kg to 3T Line speed: up to 12m per minute Electric motor size: 1hp to 3hp, duty cycle 100%

7 Diesel winch with side capstan for pulling and lifting.

Capstan line pull: up to 10T Winch lift capacity: up to 5T Speed: up to 20m per minute Rope capacity: 200m to 1000m

8 Diesel winches for pulling and lifting with line pull gauge.

Winch line pull: up to 25T Speed: up to 120m per minute Rope capacity: 250m to 6000m

4 Diesel capstan winches with digital line pull and distance gauge.

Line pull: 500kg to 4T Line speed: up to 28m per minute Computer controlled line pull can be preset in increments from 500kg to 4T

6 Diesel winch with side capstan for pulling and lifting with line pull gauge.

Capstan line pull: up to 6T Winch lift capacity: up to 4T Speed: up to 50m per minute Rope capacity: 200m to 750m

9 Hydraulic cable installers for pushing and pulling cable through conduit with kN line pull gauge and optional mini loader or diesel powerpack.

Push pull capacity: up to 10kN (1T) Push pull speed: up to 30m per minute Cable sizes: 50m to 150m

Cable Drum Jacks and Stands

Cable Cutters and Crimpers

58 Power pack battery supports our range of hydraulic remote head crimpers and cutters.

Each 45 minute charge provides up to 50 crimps or cuts.

10 Cable crimper 60T force hydraulic remote head.

Suits copper and aluminium dies up to 1000mm

11 Cable crimper 12T force hydraulic remote head.

Suits copper and aluminium dies up to 300mm

12 Cable crimper 12T force hydraulic manual operation.

Suits copper and aluminium dies up to 300mm

13 Cable crimper 14.7T hydraulic remote head.

Suits copper and aluminium dies

14 Cable cutters hydraulic remote head or battery powered.

Battery powered cuts: copper up to 300mm2 aluminium up to 500mm2. Hydraulic opening sizes 55mm up to 120mm

15 12T force hydraulic manual terminal indent crimper.

Suits copper 5mm to 750mm and aluminium 6mm to 1000mm

17 Power pack electric 240V supports our hydraulic remote head crimpers and cutters for multiple crimps or cuts.

Supplied with 2m hydraulic hose, pendant control and auto control.

500KG TO 35 TONNE

34 Cable drum stands up to 500 kg available in A-frame or rock-back type.

Drum capacity: 500kg Max drum diameter: up to 1150mm Max drum width: up to 750mm

35 Cable drum jacks (scissor type) with 3 pipe spindles.

Drum capacity: 1T, 2T, 3T 2T: diameter 1500mm; width 1800mm 3T: diameter 2600mm, width 1800mm

36 Cable drum stands (aircraft type) with hydraulic jacks.

Drum capacity: up to 5T Suit drum diameter: up to 3000mm Max drum width: 1200mm

37 Cable drum stands with hydraulic jacks.

Drum capacity: up to 10T Suit drum diameter: 3200mm Max drum width: up to 2400mm Max spindle diameter: 74mm

38 Cable drum stands with hydraulic jacks.

Drum capacity: 15T, Suit drum diameter: 1100mm to 3900mm Max drum width: up to 2200mm (Optional petrol or diesel drum drive)

60 Cable drum stands which disassembles for transport.

Drum capacity: up to 22T Suit drum diameter: 1000mm to 3000mm Max drum width: 2200mm (Optional petrol or diesel drum drive)

Accessories

20 Cable snakes/rodders on reel.

Lengths: 40m, 80m, 125m, 150m, 200m Copper traces available

21 2 stage and 3 stage 240V electric rope blowing kit.

Blows drawline through 19mm to 150mm conduits

23 Poly cable hauling rope with hauling eye on each end.

Supplied on drums with drum stand. Length: 65m, 125m, 250m Diameter: 12mm, 16mm, 22mm, 24mm

24 Cable socks and lace up socks.

Sizes to grip cables: 9mm to 126mm

59 Diesel air compressors suitable for a huge range of industrial applications.

75 CFM up to 500 CFM

62 Heavy duty steel conduit bender. Simple operation, easily transportable, compliments metal conduit die set

Supplied with 16mm, 20mm, 25mm, 30mm bending formers

26 Conduit cleaning squeegees complete with shackles.

Sizes: 50mm, 80mm, 100mm, 125mm, 150mm

27 Conduit cleaning brushes to suit occupied and unoccupied.

Suit occupied/unoccupied conduits up to 150mm

28 Cable hauling swivels with 4 bow shackles.

Sizes: 1T (22mm diam), 1.8T (33mm diam), 3.5T (40mm diam), 5T (60mm diam)

29 Cable and pipe locator with conductive wires, clips & headphones.

Inductive and conductive modes, depth indicator

30 Electric hydraulic selfer punch

With punch capacity in mild steel 6mm and stainless steel 3mm. Includes dies ranging from 8.5mm to 18mm diameter

31 Switchboard cabinet punch and die set.

Hole sizes: 16.5mm to 64mm diameter up to 3.2mm mild steel or 2mm stainless steel

22 Pressure roping kit.

Blows drawline through 50mm to 150mm conduits Requires 75 CFM to 265 CFM compressor

32 Metal conduit vice on stand.

Suit steel conduits 16mm to 50mm diameter

33 Metal conduit die set.

Suit conduit sizes: 16mm, 20mm, 25mm, 32mm, 40mm

Can’t find what you’re looking for? Call us on 07 3376 2888 or visit www.winchhire.com.au

62

Cable drum stands with hydraulic jacks.

Drum capacity: up to 35 tonne Suit drum diameter: up to 4400mm Maximum drum width: 3500mm (Optional drum drive with diesel / hydraulic powerpack)

Designed for the power and telecommunication industries for installation of copper, aluminium and fibre optic cables, subduct and pipe

8359_WINHA CABLE HANDLING BROCHURE.indd 2 24/05/12 2:31 PM

Check out our website for new product updates www.winchhire.com.au Comprehensive range of dies available to suit our cable cutters and crimpers.

Cable Hauling and Lifting Winches200KG TO 25 TONNE

57

3 Electric winches ranging in size from 200kg up to 10 tonne for pulling and lifting.

Line pull: from 200kg up to 10T Line speed: up to 20m per minute Rope capacity: 200m to 1000m

Trailer mounted bull wheel winches designed to haul cable through ducts using a double bull wheel configuration with storage wheel.

Line pull: up to 3T. Line speed: up to 15m per minute. Rope capacity: up to 1000m

1 Petrol and diesel capstan winches complete with safety screen.

Line pull: 500kg to 2.5T Line speed: up to 14m per minute Petrol motor size: 4hp to 13hp

2 240V electric capstan winches complete with safety screen.

Line pull: 500kg to 3T Line speed: up to 12m per minute Electric motor size: 1hp to 3hp, duty cycle 100%

7 Diesel winch with side capstan for pulling and lifting.

Capstan line pull: up to 10T Winch lift capacity: up to 5T Speed: up to 20m per minute Rope capacity: 200m to 1000m

8 Diesel winches for pulling and lifting with line pull gauge.

Winch line pull: up to 25T Speed: up to 120m per minute Rope capacity: 250m to 6000m

4 Diesel capstan winches with digital line pull and distance gauge.

Line pull: 500kg to 4T Line speed: up to 28m per minute Computer controlled line pull can be preset in increments from 500kg to 4T

6 Diesel winch with side capstan for pulling and lifting with line pull gauge.

Capstan line pull: up to 6T Winch lift capacity: up to 4T Speed: up to 50m per minute Rope capacity: 200m to 750m

9 Hydraulic cable installers for pushing and pulling cable through conduit with kN line pull gauge and optional mini loader or diesel powerpack.

Push pull capacity: up to 10kN (1T) Push pull speed: up to 30m per minute Cable sizes: 50m to 150m

Cable Drum Jacks and Stands

Cable Cutters and Crimpers

58 Power pack battery supports our range of hydraulic remote head crimpers and cutters.

Each 45 minute charge provides up to 50 crimps or cuts.

10 Cable crimper 60T force hydraulic remote head.

Suits copper and aluminium dies up to 1000mm

11 Cable crimper 12T force hydraulic remote head.

Suits copper and aluminium dies up to 300mm

12 Cable crimper 12T force hydraulic manual operation.

Suits copper and aluminium dies up to 300mm

13 Cable crimper 14.7T hydraulic remote head.

Suits copper and aluminium dies

14 Cable cutters hydraulic remote head or battery powered.

Battery powered cuts: copper up to 300mm2 aluminium up to 500mm2. Hydraulic opening sizes 55mm up to 120mm

15 12T force hydraulic manual terminal indent crimper.

Suits copper 5mm to 750mm and aluminium 6mm to 1000mm

17 Power pack electric 240V supports our hydraulic remote head crimpers and cutters for multiple crimps or cuts.

Supplied with 2m hydraulic hose, pendant control and auto control.

500KG TO 35 TONNE

34 Cable drum stands up to 500 kg available in A-frame or rock-back type.

Drum capacity: 500kg Max drum diameter: up to 1150mm Max drum width: up to 750mm

35 Cable drum jacks (scissor type) with 3 pipe spindles.

Drum capacity: 1T, 2T, 3T 2T: diameter 1500mm; width 1800mm 3T: diameter 2600mm, width 1800mm

36 Cable drum stands (aircraft type) with hydraulic jacks.

Drum capacity: up to 5T Suit drum diameter: up to 3000mm Max drum width: 1200mm

37 Cable drum stands with hydraulic jacks.

Drum capacity: up to 10T Suit drum diameter: 3200mm Max drum width: up to 2400mm Max spindle diameter: 74mm

38 Cable drum stands with hydraulic jacks.

Drum capacity: 15T, Suit drum diameter: 1100mm to 3900mm Max drum width: up to 2200mm (Optional petrol or diesel drum drive)

60 Cable drum stands which disassembles for transport.

Drum capacity: up to 22T Suit drum diameter: 1000mm to 3000mm Max drum width: 2200mm (Optional petrol or diesel drum drive)

Accessories

20 Cable snakes/rodders on reel.

Lengths: 40m, 80m, 125m, 150m, 200m Copper traces available

21 2 stage and 3 stage 240V electric rope blowing kit.

Blows drawline through 19mm to 150mm conduits

23 Poly cable hauling rope with hauling eye on each end.

Supplied on drums with drum stand. Length: 65m, 125m, 250m Diameter: 12mm, 16mm, 22mm, 24mm

24 Cable socks and lace up socks.

Sizes to grip cables: 9mm to 126mm

59 Diesel air compressors suitable for a huge range of industrial applications.

75 CFM up to 500 CFM

62 Heavy duty steel conduit bender. Simple operation, easily transportable, compliments metal conduit die set

Supplied with 16mm, 20mm, 25mm, 30mm bending formers

26 Conduit cleaning squeegees complete with shackles.

Sizes: 50mm, 80mm, 100mm, 125mm, 150mm

27 Conduit cleaning brushes to suit occupied and unoccupied.

Suit occupied/unoccupied conduits up to 150mm

28 Cable hauling swivels with 4 bow shackles.

Sizes: 1T (22mm diam), 1.8T (33mm diam), 3.5T (40mm diam), 5T (60mm diam)

29 Cable and pipe locator with conductive wires, clips & headphones.

Inductive and conductive modes, depth indicator

30 Electric hydraulic selfer punch

With punch capacity in mild steel 6mm and stainless steel 3mm. Includes dies ranging from 8.5mm to 18mm diameter

31 Switchboard cabinet punch and die set.

Hole sizes: 16.5mm to 64mm diameter up to 3.2mm mild steel or 2mm stainless steel

22 Pressure roping kit.

Blows drawline through 50mm to 150mm conduits Requires 75 CFM to 265 CFM compressor

32 Metal conduit vice on stand.

Suit steel conduits 16mm to 50mm diameter

33 Metal conduit die set.

Suit conduit sizes: 16mm, 20mm, 25mm, 32mm, 40mm

Can’t find what you’re looking for? Call us on 07 3376 2888 or visit www.winchhire.com.au

62

Cable drum stands with hydraulic jacks.

Drum capacity: up to 35 tonne Suit drum diameter: up to 4400mm Maximum drum width: 3500mm (Optional drum drive with diesel / hydraulic powerpack)

Designed for the power and telecommunication industries for installation of copper, aluminium and fibre optic cables, subduct and pipe

8359_WINHA CABLE HANDLING BROCHURE.indd 2 24/05/12 2:31 PM

Check out our website for new product updates www.winchhire.com.au Comprehensive range of dies available to suit our cable cutters and crimpers.

Cable Hauling and Lifting Winches200KG TO 25 TONNE

57

3 Electric winches ranging in size from 200kg up to 10 tonne for pulling and lifting.

Line pull: from 200kg up to 10T Line speed: up to 20m per minute Rope capacity: 200m to 1000m

Trailer mounted bull wheel winches designed to haul cable through ducts using a double bull wheel configuration with storage wheel.

Line pull: up to 3T. Line speed: up to 15m per minute. Rope capacity: up to 1000m

1 Petrol and diesel capstan winches complete with safety screen.

Line pull: 500kg to 2.5T Line speed: up to 14m per minute Petrol motor size: 4hp to 13hp

2 240V electric capstan winches complete with safety screen.

Line pull: 500kg to 3T Line speed: up to 12m per minute Electric motor size: 1hp to 3hp, duty cycle 100%

7 Diesel winch with side capstan for pulling and lifting.

Capstan line pull: up to 10T Winch lift capacity: up to 5T Speed: up to 20m per minute Rope capacity: 200m to 1000m

8 Diesel winches for pulling and lifting with line pull gauge.

Winch line pull: up to 25T Speed: up to 120m per minute Rope capacity: 250m to 6000m

4 Diesel capstan winches with digital line pull and distance gauge.

Line pull: 500kg to 4T Line speed: up to 28m per minute Computer controlled line pull can be preset in increments from 500kg to 4T

6 Diesel winch with side capstan for pulling and lifting with line pull gauge.

Capstan line pull: up to 6T Winch lift capacity: up to 4T Speed: up to 50m per minute Rope capacity: 200m to 750m

9 Hydraulic cable installers for pushing and pulling cable through conduit with kN line pull gauge and optional mini loader or diesel powerpack.

Push pull capacity: up to 10kN (1T) Push pull speed: up to 30m per minute Cable sizes: 50m to 150m

Cable Drum Jacks and Stands

Cable Cutters and Crimpers

58 Power pack battery supports our range of hydraulic remote head crimpers and cutters.

Each 45 minute charge provides up to 50 crimps or cuts.

10 Cable crimper 60T force hydraulic remote head.

Suits copper and aluminium dies up to 1000mm

11 Cable crimper 12T force hydraulic remote head.

Suits copper and aluminium dies up to 300mm

12 Cable crimper 12T force hydraulic manual operation.

Suits copper and aluminium dies up to 300mm

13 Cable crimper 14.7T hydraulic remote head.

Suits copper and aluminium dies

14 Cable cutters hydraulic remote head or battery powered.

Battery powered cuts: copper up to 300mm2 aluminium up to 500mm2. Hydraulic opening sizes 55mm up to 120mm

15 12T force hydraulic manual terminal indent crimper.

Suits copper 5mm to 750mm and aluminium 6mm to 1000mm

17 Power pack electric 240V supports our hydraulic remote head crimpers and cutters for multiple crimps or cuts.

Supplied with 2m hydraulic hose, pendant control and auto control.

500KG TO 35 TONNE

34 Cable drum stands up to 500 kg available in A-frame or rock-back type.

Drum capacity: 500kg Max drum diameter: up to 1150mm Max drum width: up to 750mm

35 Cable drum jacks (scissor type) with 3 pipe spindles.

Drum capacity: 1T, 2T, 3T 2T: diameter 1500mm; width 1800mm 3T: diameter 2600mm, width 1800mm

36 Cable drum stands (aircraft type) with hydraulic jacks.

Drum capacity: up to 5T Suit drum diameter: up to 3000mm Max drum width: 1200mm

37 Cable drum stands with hydraulic jacks.

Drum capacity: up to 10T Suit drum diameter: 3200mm Max drum width: up to 2400mm Max spindle diameter: 74mm

38 Cable drum stands with hydraulic jacks.

Drum capacity: 15T, Suit drum diameter: 1100mm to 3900mm Max drum width: up to 2200mm (Optional petrol or diesel drum drive)

60 Cable drum stands which disassembles for transport.

Drum capacity: up to 22T Suit drum diameter: 1000mm to 3000mm Max drum width: 2200mm (Optional petrol or diesel drum drive)

Accessories

20 Cable snakes/rodders on reel.

Lengths: 40m, 80m, 125m, 150m, 200m Copper traces available

21 2 stage and 3 stage 240V electric rope blowing kit.

Blows drawline through 19mm to 150mm conduits

23 Poly cable hauling rope with hauling eye on each end.

Supplied on drums with drum stand. Length: 65m, 125m, 250m Diameter: 12mm, 16mm, 22mm, 24mm

24 Cable socks and lace up socks.

Sizes to grip cables: 9mm to 126mm

59 Diesel air compressors suitable for a huge range of industrial applications.

75 CFM up to 500 CFM

62 Heavy duty steel conduit bender. Simple operation, easily transportable, compliments metal conduit die set

Supplied with 16mm, 20mm, 25mm, 30mm bending formers

26 Conduit cleaning squeegees complete with shackles.

Sizes: 50mm, 80mm, 100mm, 125mm, 150mm

27 Conduit cleaning brushes to suit occupied and unoccupied.

Suit occupied/unoccupied conduits up to 150mm

28 Cable hauling swivels with 4 bow shackles.

Sizes: 1T (22mm diam), 1.8T (33mm diam), 3.5T (40mm diam), 5T (60mm diam)

29 Cable and pipe locator with conductive wires, clips & headphones.

Inductive and conductive modes, depth indicator

30 Electric hydraulic selfer punch

With punch capacity in mild steel 6mm and stainless steel 3mm. Includes dies ranging from 8.5mm to 18mm diameter

31 Switchboard cabinet punch and die set.

Hole sizes: 16.5mm to 64mm diameter up to 3.2mm mild steel or 2mm stainless steel

22 Pressure roping kit.

Blows drawline through 50mm to 150mm conduits Requires 75 CFM to 265 CFM compressor

32 Metal conduit vice on stand.

Suit steel conduits 16mm to 50mm diameter

33 Metal conduit die set.

Suit conduit sizes: 16mm, 20mm, 25mm, 32mm, 40mm

Can’t find what you’re looking for? Call us on 07 3376 2888 or visit www.winchhire.com.au

62

Cable drum stands with hydraulic jacks.

Drum capacity: up to 35 tonne Suit drum diameter: up to 4400mm Maximum drum width: 3500mm (Optional drum drive with diesel / hydraulic powerpack)

Designed for the power and telecommunication industries for installation of copper, aluminium and fibre optic cables, subduct and pipe

8359_WINHA CABLE HANDLING BROCHURE.indd 2 24/05/12 2:31 PM

Check out our website for new product updates www.winchhire.com.auCheck out our website for new product updates www.winchhire.com.au

35 Boron Street Sumner Park Brisbane Q 4074 PO Box 509 Sumner Park Brisbane Q 4074

Telephone 07 3376 2888 Facsimile 07 3376 8672 Email info@winchhire.com.au

A division of Impact Supplies (Australia) Pty Ltd ABN 90 522 753 Printed April 2012

Rollers and Guides

45 Fold base curved roller.

140mm wide ball bearing roller

46 Dog bone roller, flat base, with/out tray legs for cable tray use.

140mm wide ball bearing roller

47 Fold base flat roller.

135mm wide roller with nylon bush

48 Split duct quad rollers for guiding cables into conduit in any direction or angle.

Sizes: 100mm, 125mm

49 Trench/pit pivoting slipper guide.

Suit cables up to 100mm diameter

50 Trench/pit twin roller guide.

Suit cables up to 140mm diameter

51 Cable snatch block, side opening.

Suit cables up to 80mm diameter

52 Conduit slipper guide (inlet), aids damage free entry of cable(s) into conduit.

Sizes: 50mm, 80mm, 100mm, 125mm, 150mm

53 Split duct roller guides to aid cable exit from conduit.

Sizes: 50mm, 63mm, 80mm, 100mm, 125mm, 150mm

54 Corner trench roller for ground trench cable installations.

Suit cables up to 160mm diameter

55 Cable tray rollers for horizontal and vertical directional change.

Suit cables up to 50mm diameter

56 Three roller 45 degree bend and four roller 90 degree bend frames.

Suit cables up to 125mm diameter

Check out our website for new product updates www.winchhire.com.au

Optic Fibre Cable Hauling Winches

Cable Drum Trailers

40 41 42Cable drum trailer (Jinker), 600kg, hydraulic self loading.

Max drum diameter: 1400mm Max drum width: 1300mm

Cable drum trailer (Jinker), 1T, manual self loading system, manual rear stabilizer legs.

Max drum diameter: 2050mm Max drum width: 1500mm

Cable drum trailer (Jinker), 1.5T, hydraulic self loading and drum drive systems with hydraulic stabilizer legs.

Max drum diameter: 1800mm Max drum width: 1200mm

43 61 44Cable drum trailer (Jinker), 3T, hydraulic self loading and drum drive systems with hydraulic stabilizer legs.

Max drum diameter: 2100mm Max drum width: 1500mm

Triple drum trailer (Jinker), 1.7T, manual loading with drum drive system. Twin drum trailers also available.

Max drum diameter: 1300mm Max drum width: 900mm

Cable drum trailer (Jinker), 6.5T, hydraulic self loading and drum drive systems with hydraulic stabiliser legs.

Max drum diameter: 2700mm Max drum width: 1550mm

18 19Hydraulic trailer mounted optic fibre cable hauling winches available either petrol or diesel.

Fibre optics certified and road registered

Diesel/hydraulic Land Cruiser mounted optic fibre cable hauling winch.

Fibre optics certified and road registered

For your next optic fibre handling project, our optic fibre winches are available for short or long term hire. All units are fitted with electronic distance measuring equipment and safety screens for operator protection. They are available trailer mounted, Land Cruiser mounted or skid mounted to suit your requirements.

400KG TO 6.5 TONNE

June 2012

Available for HireCABLE HANDLING EQUIPMENT

ESTABLISHED SINCE 1996

8359_WINHA CABLE HANDLING BROCHURE.indd 1 24/05/12 2:31 PM

Check out our website for new product updates www.winchhire.com.auCheck out our website for new product updates www.winchhire.com.au

35 Boron Street Sumner Park Brisbane Q 4074 PO Box 509 Sumner Park Brisbane Q 4074

Telephone 07 3376 2888 Facsimile 07 3376 8672 Email info@winchhire.com.au

A division of Impact Supplies (Australia) Pty Ltd ABN 90 522 753 Printed April 2012

Rollers and Guides

45 Fold base curved roller.

140mm wide ball bearing roller

46 Dog bone roller, flat base, with/out tray legs for cable tray use.

140mm wide ball bearing roller

47 Fold base flat roller.

135mm wide roller with nylon bush

48 Split duct quad rollers for guiding cables into conduit in any direction or angle.

Sizes: 100mm, 125mm

49 Trench/pit pivoting slipper guide.

Suit cables up to 100mm diameter

50 Trench/pit twin roller guide.

Suit cables up to 140mm diameter

51 Cable snatch block, side opening.

Suit cables up to 80mm diameter

52 Conduit slipper guide (inlet), aids damage free entry of cable(s) into conduit.

Sizes: 50mm, 80mm, 100mm, 125mm, 150mm

53 Split duct roller guides to aid cable exit from conduit.

Sizes: 50mm, 63mm, 80mm, 100mm, 125mm, 150mm

54 Corner trench roller for ground trench cable installations.

Suit cables up to 160mm diameter

55 Cable tray rollers for horizontal and vertical directional change.

Suit cables up to 50mm diameter

56 Three roller 45 degree bend and four roller 90 degree bend frames.

Suit cables up to 125mm diameter

Check out our website for new product updates www.winchhire.com.au

Optic Fibre Cable Hauling Winches

Cable Drum Trailers

40 41 42Cable drum trailer (Jinker), 600kg, hydraulic self loading.

Max drum diameter: 1400mm Max drum width: 1300mm

Cable drum trailer (Jinker), 1T, manual self loading system, manual rear stabilizer legs.

Max drum diameter: 2050mm Max drum width: 1500mm

Cable drum trailer (Jinker), 1.5T, hydraulic self loading and drum drive systems with hydraulic stabilizer legs.

Max drum diameter: 1800mm Max drum width: 1200mm

43 61 44Cable drum trailer (Jinker), 3T, hydraulic self loading and drum drive systems with hydraulic stabilizer legs.

Max drum diameter: 2100mm Max drum width: 1500mm

Triple drum trailer (Jinker), 1.7T, manual loading with drum drive system. Twin drum trailers also available.

Max drum diameter: 1300mm Max drum width: 900mm

Cable drum trailer (Jinker), 6.5T, hydraulic self loading and drum drive systems with hydraulic stabiliser legs.

Max drum diameter: 2700mm Max drum width: 1550mm

18 19Hydraulic trailer mounted optic fibre cable hauling winches available either petrol or diesel.

Fibre optics certified and road registered

Diesel/hydraulic Land Cruiser mounted optic fibre cable hauling winch.

Fibre optics certified and road registered

For your next optic fibre handling project, our optic fibre winches are available for short or long term hire. All units are fitted with electronic distance measuring equipment and safety screens for operator protection. They are available trailer mounted, Land Cruiser mounted or skid mounted to suit your requirements.

400KG TO 6.5 TONNE

June 2012

Available for HireCABLE HANDLING EQUIPMENT

ESTABLISHED SINCE 1996

8359_WINHA CABLE HANDLING BROCHURE.indd 1 24/05/12 2:31 PM