®328D LCRHydraulic Excavator

Cat® C7 Diesel Engine with ACERT™ TechnologyNet Power (ISO 9249) at 1800 rpm 152 kW/207 hp

Operating Weight 35 400 kgMaximum Travel Speed 4.2 km/hMaximum Reach at Ground Level 10 560 mmMaximum Digging Depth 6920 mmTail Swing Radius 1900 mm

328D LCR Hydraulic ExcavatorOffers a compact radius and improved performance, versatility and styling.

Boom, Stick and LinkageA reach boom and a long stick is available to suit a variety ofapplication conditions. pg. 8

StructuresCaterpillar® design and manufacturing techniques assureoutstanding durability and service life from these importantcomponents. pg. 8

Work Tools and GETA variety of work tools, including buckets, couplers,hammers, crushers, pulverizers, multiprocessors, shears and grapples are available. pg. 10

Service and MaintenanceFast, easy service has been designed in with extended serviceintervals, advanced filtration, convenient filter access anduser-friendly electronic diagnostics for increased productivityand reduced maintenance costs. pg. 9

Complete Customer SupportYour Cat dealer offers a wide range of services that can be setup under a customer support agreement when you purchaseyour equipment. The dealer will help you choose a plan thatcan cover everything from machine configuration to eventualreplacement. pg. 9

C7 Engine with ACERT™ TechnologyACERT Technology works at the point of combustion to optimize engine performance and provide low exhaustemissions to meet EU Stage IIIA emission regulations, with exceptional performance capabilities and provenreliability. pg. 4

HydraulicsThe hydraulic system has been designed to providereliability and outstanding controllability. An optional ToolControl System provides enhanced flexibility. pg. 5

Operator StationProvides maximum space, wider visibility and easy access to switches. The monitor is a full-color graphical display thatallows the operator to understand the machine informationeasily. Overall, the new cab provides a comfortableenvironment for the operator. pg. 6

3

Compact RadiusThe 328D LCR has been designed to rotate with a minimal amount of counterweight hanging over the tracks, which allows it to work in tight, confined areas.

Space Restriction. The increasing need to work within space-restricted areashas created a demand for larger excavators that can also work within tighterquarters and provide greater productivity. The newest addition to this lineupof Compact Radius (CR) excavators is the 328D LCR.

Productivity. Even though the 328D LCR has been designed for use inspecific applications that require high maneuverability in confined spaces, it still maintains the ability to accomplish tasks in a variety of applicationswhere space is not a factor.

Swing Radius. The Caterpillar 328D LCR has a tail swing radius of 1900 mm as compared to 3080 mm for the standard Caterpillar 325D L. This reduction of tail swing may allow for swing operation with greaterconfidence knowing that the tail of the machine only has a minimal amountof overhang.

Lift and Stability. The boom on the 328D LCR has been moved more towardsthe center of the machine, this results in overall greater lift capacity over the front as compared to the standard 325D L. In addition to the repositioningof the boom, the Cat 328D LCR utilizes the undercarriage of the 330D L,which allows for an extremely stable operating platform.

A

A

A2750 mm

1900 mm

3080 mm

323D L

321C LCR

325D L

328D LCR 323D L 325D LTail swing radius (mm) 1900 2750 3080

A Overhang (mm)

with 600 mm shoes 305 1235 1485

with 850 mm shoes 180 1110 1360

328D LCR versus 325D L. Compare minimum frontswing radius and tail swing radius:

328D LCR 325D LTail swing radius (mm) 1900 3080

Minimum front swing radius (mm) 3400 4140

4

EngineBuilt for power reliability, economy and low emissions.

Cat C7 ACERT. The Cat C7 with ACERTTechnology introduces a series ofevolutionary, incremental improvementsthat provide breakthrough enginetechnology. The building blocks ofACERT Technology are fuel delivery,air management and electronic control.ACERT Technology optimizes engineperformance while meeting EU StageIIIA engine emission regulations.

Performance. The 328D LCR, equippedwith the C7 engine with ACERTTechnology, provides 8% morehorsepower as compared to the 3126BATAAC HEUI in the 325C LCR.

Automatic Engine Speed Control.The two-stage, one-touch controlmaximizes fuel efficiency andreduces sound levels.

ADEM™ A4 Engine Controller.The ADEM A4 electronic controlmodule manages fuel delivery to getthe best performance per liter (gallon)of fuel used. The engine managementsystem provides flexible fuel mapping,allowing the engine to respond quicklyto varying application needs. It tracksengine and machine conditions whilekeeping the engine operating atpeak efficiency.

Electronic Control Module.The Electronic Control Module (ECM)works as the “brain” of the engine’scontrol system, responding quickly tooperating variables to maximize engineefficiency. Fully integrated with sensorsin the engine’s fuel, air, coolant, andexhaust systems, the ECM stores andrelays information on conditions suchas rpm, fuel consumption, and diagnosticinformation.

Fuel Delivery. The Cat C7 featureselectronic controls that govern the fuelinjection system. Multiple injectionfuel delivery involves a high degreeof precision. Precisely shaping thecombustion cycle lowers combustionchamber temperatures, generatingfewer emissions and optimizing fuelcombustion. This translates into morework output for your fuel cost.

Cooling System. The cooling fanis directly driven from the engine.An electrically controlled viscousclutch fan is utilized to reduce fan noise.The optimum fan speed is calculatedbased on the target engine speed, coolanttemperature, hydraulic oil temperatureand actual fan speed. The 328D LCRincorporates side by side cooling,allowing easy access to keep the coolingcores free of debris.

Air Cleaner. The radial seal air filterfeatures a double-layered filter corefor more efficient filtration and is locatedin a compartment behind the cab. A warning is displayed on the monitorwhen dust accumulates above a presetlevel.

Noise Reduction Technologies.The engine mounts are rubber-isolatingmounts matched with the engine package.Further noise reduction has beenachieved through design changes tothe isolated top cover, oil pan, multipleinjection strategy, insulated timing cover,sculpted crankcase and gear trainrefinements.

5

HydraulicsCat hydraulics deliver power and precise control to keep material moving.

Component Layout. The hydraulicsystem and component locations havebeen designed to provide a high levelof system efficiency. The main pumps,control valves and hydraulic tank arelocated close together. This allowsfor shorter tubes and lines betweencomponents, which reduce friction loss,and pressure drops in the lines. Thelayout further provides greater operatorcomfort by placing the radiator on thecab side of the upper structure. Thisallows incoming air to enter the enginecompartment from the operator side. Hot air and corresponding engine soundexits on the opposite side away fromthe operator. This reduces enginecompartment heat and sound beingtransmitted to the operator.

Pilot System. The pilot pump isindependent from the main pumps andcontrols the front linkage, swing andtravel operations.

Hydraulic Cross Sensing System.The hydraulic cross sensing systemutilizes each of two hydraulic pumps to100 percent of engine power, under alloperating conditions. This improvesproductivity with faster implementspeeds and quicker, stronger pivot turns.

Boom and Stick Regeneration Circuit.Boom and stick regeneration circuitsaves energy during boom-down andstick-in operation. This increasesoperator efficiency, reduces cycle timesand pressure loss. Benefits includehigher productivity, lower operatingcosts and increased fuel efficiency.

Auxiliary Hydraulic Valve. The auxiliaryvalve is standard on the 328D LCR.Control Circuits are available asattachments, allowing for operationof high and medium pressure tools.These include shears, grapples,hammers, pulverizers, multi-processorsand vibratory plate compactors.

Hydraulic Cylinder Snubbers.Snubbers are located at the rod-end ofthe boom cylinders and both ends of the stick cylinders. Benefits includereducing sound levels, cushion shockswhile extending component life.

6

Operator StationDesigned for simple, easy operation and comfort, the 328D LCR allows the operator to focus on production.

Operator Station. The workstation is spacious, quiet andcomfortable, assuring high productivity during a longworkday. The attachment switches, key switch and throttledial are conveniently located on the right-hand wall. The monitor is easy to see and maximizes visibility.

Joystick Control. The joystick controls are designed for low lever effort and match operator’s natural wrist and armposition. The operator can operate the joystick controls withan arm on the armrest. Horizontal and vertical strokes havebeen designed to reduce operator fatigue.

7

Seat. The air suspension seat is standardin the 328D LCR, provides a variety ofadjustments to suit the operator’size andweight including fore/aft, height andweight. Wide adjustable armrest and aretractable seat belt are also included

Automatic Climate Control. Fullyautomatic climate control adjuststemperature and flow, and determineswhich air outlet is best in each situationwith a touch of a button.

Hydraulic Activation Control Lever.For added safety, this lever must bein the operate position to activate themachine control functions.

Skylight. An enlarged skylight withsunshade provides excellent visibilityand ventilation.

Door. The 328D LCR features a curvedsliding door. This feature is ideal forthose situations when space is restrictedand opening a conventional door is notpermissible.

Windows. All glass is affixed directly to the cab for excellent visibilityeliminating window frames. The upperfront windshield opens, closes and storeson the roof above the operator with aone-touch action release system.

Wipers. Pillar-mounted wipers increasethe operator’s viewing area and offercontinuous and intermittent modes.

Monitor. The monitor is a full color 400 x 234 pixels Liquid Crystal Display(LCD) graphic display. The angle can beadjusted to minimize sun glare and hasthe capability of displaying informationin twenty-seven different languages.

Pre-Start Check. Prior to starting themachine, the system will check for lowfluid levels. These include engine oil,hydraulic oil and engine coolant.The event display area warns theoperator if one of the conditions exists.

Gauge Display. Three analog gauges,fuel level, hydraulic oil temperatureand coolant temperature, are displayed in this area.

Event Display. Machine information isdisplayed in this area with the icon andlanguage.

Multi-information Display. This areais reserved for displaying variousinformation which is convenient for theoperator. The “CAT” logo is displayedwhen no information is available tobe displayed.

Console. Redesigned consoles featurea simple, functional design to reduceoperator fatigue, ease of switchoperation and excellent visibility. Both consoles have attached armrestswith height adjustments.

Cab Exterior. The exterior design usesthick steel tubing along the bottomperimeter of the cab, improving theresistance of fatigue and vibration.This design allows the FOGS to bebolted directly to the cab, at the factoryor as an attachment later, enabling themachine to meet specifications and jobsite requirements.

Cab Mounts. The cab shell is attachedto the frame with viscous rubber cabmounts, which dampen vibrationsand sound levels while enhancingoperator comfort.

Standard Cab Equipment. To enhanceoperator comfort and productivity, thecab includes a drink holder, coat hook,service meter, literature holder andmagazine rack.

8

StructuresStructural components and undercarriage are the backbone of the machine’s durability.

Robotic Welding. Up to 95% of the structural welds on a CaterpillarExcavator are completed by robots.Robotic welds achieve over threetimes the penetration of manual welds.

Carbody Design and Track RollerFrames. X-shaped, box-sectioncarbody provides excellent resistanceto torsional bending. Robot-weldedtrack roller frames are press-formed,pentagonal units to deliver exceptionalstrength and service life.

Main Frame. Rugged main frame isdesigned for maximum durability andefficient use of materials.

Swing Bearing. The swing bearingutilizes cross roller bearings versus thetraditional ball bearing design. Thecross roller bearing design allows formore surface contact to absorb the

stresses that are a result of the highswing torque that Cat offers. It provides exceptional machinestability and reduces machine pitchingduring boom down operation.

Undercarriage. Durable Catundercarriage absorbs stresses andprovides excellent stability.

Rollers and Idlers. Sealed andlubricated track rollers, carrier rollers,and idlers provide excellent servicelife, to keep the machine in the fieldlonger.

Long Undercarriage. The long (L)undercarriage maximizes stability andlift capacity. Two additional tracklinks have been added to the 328DLCR. This long, wide, and sturdyundercarriage offers a very stablework platform.

Booms, Sticks and LinkageDesigned for flexibility, high productivity, and efficiency in a variety of applications.

Reach Boom. The reach boom (6150 mm) is designedto balance reach, digging force bucket capacity,offering a wide range of applications as digging,loading, trenching and working with hydraulic tools.

R3.2CB2 Stick. The CB-family buckets associatedwith these sticks have enough capacity for excellentreach and depth in trenching and general constructionapplications.

Linkage Pins. The bucket linkage pins have beenenlarged to improve reliability and durability. All thepins in the front linkages have thick chrome plating,giving them high wear and corrosion resistance.

Bucket Linkage. The power link improves durability,increases machine-lifting capability in key liftingpositions and with the integrated lift-eye it is easierto use than compared to the previous power link.

9

Maintenance Services. Repair optionprograms guarantee the cost of repairsup front. Diagnostic programs suchas Scheduled Oil Sampling, CoolantSampling and Technical Analysis help you avoid unscheduled repairs.

Replacement. Repair, rebuild orreplace? Your Cat dealer can helpyou evaluate the cost involved soyou can make the right choice.

Ground Level Service. The designand layout was made with the servicetechnician in mind. Many servicelocations are easily accessible at groundlevel allowing critical maintenance to get done quickly and efficiently.

Air Filter Compartment. The air filterfeatures a double-element constructionfor superior cleaning efficiency.When the air cleaner plugs, a warningis displayed on the monitor screeninside the cab.

Pump Compartment. A service dooron the right side of the upper structureallows ground-level access to the pumpand pilot filter.

Radiator Compartment. The left rearservice door allows easy access to theengine radiator, oil cooler and air-to-air-after-cooler. A reserve tank and draincock are attached to the radiator forsimplified maintenance.

Complete Customer SupportCat dealer services help you operate longer with lower costs.

meets specific needs. These plans cancover the entire machine, includingattachments, to help protect thecustomer’s investment.

Operation. Improving operatingtechniques can boost your profits.Your cat dealer has videotapes, literatureand other ideas to help you increaseproductivity, and Caterpillar offerscertified operator training classes to helpmaximize the return on your investment.

Product Support. You will find nearly all parts at our dealer parts counter. Cat dealers utilize a worldwide computer network to find in-stock parts to minimize machine downtime. You can save money with Catremanufactured components.

Service and MaintenanceSimplified service and maintenance save you time and money.

Greasing Points. A concentrated remotegreasing block on the boom deliversgrease to hard-to-reach locations onthe front.

Fan Guard. Engine radiator fan iscompletely enclosed by fine wiremesh, reducing the risk of an accident.

Anti-Skid Plate. Anti-skid plate covers top of storage box and upper structure toprevent slipping during maintenance.

Diagnostics and Monitoring. The 328DLCR is equipped with S•O•SSM samplingand hydraulic test ports for the hydraulicsystem, engine oil, and for coolant. A testconnection for the Cat ElectronicTechnician (Cat ET) service tool islocated in the cab.

Extended Service Interval. 328D LCRservice and maintenance intervals have been extended to reduce machine servicetime and increase machine availability.

Machine Selection. Make detailedcomparisons of the machines you areconsidering before you buy. What arethe job requirements, machine attach-ments and operating hours?What production is needed? Your Catdealer can provide recommendations.

Purchase. Consider the financingoptions available as well as day-to-dayoperating costs. This is also the time tolook at dealer services that can beincluded in the cost of the machine toyield lower equipment owning andoperating costs over the long run.

Customer Support Agreements. Cat dealers offer a variety of productsupport agreements, and work withcustomers to develop a plan the best

10

1310 11 12

16 1817

14

15

1 2 3

Work Tools and GETA wide variety of Work Tools help optimize machine performance. Purpose designed and built to Caterpillar’s high durability standards.

Work Tools. Choose from a variety of work tools such as hammers,crushers, pulverizers, shears, multi-processors and grapples.

mm kg m3 %

4098 3848

Stick 3200 mm Stick 3200 mm

Without Quick Coupler With Quick Coupler

CB2 600 646 0.49 100CB2 750 688 0.67 100CB2 1250 919 1.29 100CB2 1300 958 1.35 100CB2 1350 979 1.42 100CB2 1400 1000 1.48 100CB2 1500 1043 1.61 100CB2 1600 1084 1.74 100CB2 750 724 0.66 100CB2 1150 926 1.16 100CB2 1350 1014 1.42 100CB2 1450 1083 1.55 100CB2 1500 1104 1.61 100CB2 1600 1148 1.74 100

Maximum load in kg (payload plus bucket)

Excavation

Extreme Excavation

LinkageWidth Weight* Capacity

(ISO)Fill

Factor

Reach boom 6150 mm

Bucket Specifications

×NMax. Material Density 1200 kg/m3

Max. Material Density 1800 kg/m3

Max. Material Density 1500 kg/m3

Not compatibleNot recommended

* Bucket weight includingpenetration plus tips

11

Rationalized Bucket Line. Optimized designmatches machine configuration perfectly.Improved balance between performanceand durability. Buckets feature the newCaterpillar K Series Tooth System.

1 Excavation (X). Digs and loads soft tomedium materials such as clay and earth.Features weld on tip adapters, wearresistant steel alloy cutting edge and wearplates, and high grade steel side bars.

2 Extreme Excavation (EX). Digs and loadscompact/abrasive materials like earth/rock,sand/clay, sand/gravel, coal, chalk andlow abrasion ores. Features biggerground engaging tools, plus all wearresistant steel alloy cutting edge, wear plates and side bars.

3 Quick Coupler. Caterpillar quick couplersenable the operator to simply release one work tool and pick up another. Your hydraulic excavator becomes highlyversatile. The dedicated CW-Series quick coupler enables a quick toolexchange while maintaining top machineperformance. A lifting hook is added formaximum lift capacity.

K Series Tip Selection. The new CaterpillarK Series Tooth System holds tighter,changes easier and stays sharper.10 General Duty11 Extra Duty12 Penetration13 Penetration Plus14 Heavy Penetration15 Heavy Abrasion16 Wide17 Spike18 Double Spike

N

N

N

N

N

N

N

N

NN

N

N

NN

N

N

H120C s, H130 s, H140D sMP20 CC, CR, PP, PS, S, TSMP30 CC, CR, S, TSMP30 PP, PSVHC-40VHC-50VHP-40VHP-50S320S325S340*G115G125G320G330G320B-D, -RCVP110GOS-35 620, 700, 780GOS-35 1050, 1260GOS-35 1460, 1670GOS-45 970GOS-45 1120GOS-45 1270GOS-45 1580GOS-45 1710GOS-45 2020GOS-45 2340GSH20B 600, 800GSH20B 1000GSH22B 600GSH22B 800GSH22B 1000GSH22B 1250GSH20B 600, 800, 1000GSH22B 600GSH22B 800GSH22B 1000GSH22B 1250

Stick 3200 mm

CW-40CW-45CW-40SCW-45SH120C s, H130 s, H140D sMP20 CC, CR, PS, SMP20 PP, TSVHC-40VHC-50VHP-40VHP-50S320S325G115G125G315G320G330G320B-D, -RCVP110

N

* Boom mounted

Work Tools Matching Guide

Reach boom 6150 mm

Hammers

Multiprocessors

Crushers and Pulverizers

Without quick coupler

Hydraulic Shears

Mechanical Grapples

Multi Grapples

Vibratory Plate Compactor

Clamshell Buckets (rehandling)

Orange Peel Grapples

5 tines

4 tines

Vibratory Plate Compactor

Quick Couplers

Multiprocessors

Hammers

With quick coupler

Crushers and Pulverizers

Hydraulic Shears

Mechanical Grapples

Multi Grapples

Best choice

Quick coupler match

Not recommended Max. Material Density 3000 kg/m3

Max. Material Density 1200 kg/m3

Max. Material Density 1800 kg/m3

360° Working range

Over the front only

12 328D LCR Hydraulic Excavator specifications

Service Refill Capacities

Liters

Fuel Tank 406

Cooling System 32

Engine Oil 32

Swing Drive (each) 10

Final Drive (each) 8

Hydraulic system (including tank) 290

Hydraulic tank 153

Machine and Major Component WeightsActual weights and ground pressures will depend on final machine configuration.

kg

Base machine with counterweight (without front linkage) with 850 mm shoes 30 400

Two boom cylinders (each) 240

Standard counterweight 7720

Reach boom (6150 mm), includes lines, pins and stick cylinder 2300

Long stick (3200 mm), includes lines, pins, bucket cylinder and linkage 1390

Engine

Cat C7 with ACERT Technology

Net Power at 1800 rpm

ISO 9249 152 kW/207 hp

80/1269/EEC 152 kW/207 hp

Bore 110 mm

Stroke 127 mm

Displacement 7.2 liters

� All engine horsepower (hp) are metricincluding front page.

� The C7 engine meets Stage IIIAemission requirements.

� Net power advertised is the poweravailable at the flywheel when theengine is equipped with fan, aircleaner, muffler, and alternator.

� Full engine net power up to 2300 maltitude (engine derating requiredabove 2300 m).

Hydraulic System

Main System

Maximum flow 2 x 235 l/min

Maximum pressure

Normal 350 bar

Heavy lift 360 bar

Travel 350 bar

Swing 275 bar

Pilot System

Maximum flow 32.4 l/min

Maximum pressure 39 bar

Boom Cylinder

Bore 140 mm

Stroke 1407 mm

Stick Cylinder

Bore 150 mm

Stroke 1646 mm

CB2 Family Bucket Cylinder

Bore 135 mm

Stroke 1156 mm

Drive

Maximum Travel Speed 4.2 km/h

Maximum Drawbar Pull 300 kN

Swing Mechanism

Swing Speed 10.2 rpm

Swing Torque 82.2 kNm

Cab/FOGS

Cab/FOGS meets ISO 10262.

Sound

The dynamic exterior sound power levelmeets EU Directive 2000/14/EC.

Track Width

Optional 850 mm

Optional 600 mm

Number of Shoes Each Side 49

Number of Track Rollers Each Side 9

Number of Carrier Rollers Each Side 2

13328D LCR Hydraulic Excavator specifications

10

91

87

3

45

2

6

DimensionsAll dimensions are approximate.

mm

Reach Boom 6150

Long Stick R3.2CB2 3200

1 Shipping Height 3370

2 Shipping Length 9820

3 Tail Swing Radius 1900

4 Lenth to Center of Idler and Sprocket 4040

5 Track Length 5020

6 Ground Clearance 510

mm

7 Track Gauge 2590

8 Transport Width

850 mm shoes 3440

700 mm shoes 3290

600 mm shoes 3190

9 Cab Height 3190

10 Counterweight Clearance 1200

14

1

2

3

4

5

6

7

8

1213 10 911 8 7 6 5 4 3 2 1 0 -2-1 m

0

1

2

3

4

5

6

7

8

9

4

5

6

7

8

9

10

11

12m

14

7 ➤➤

2 ➤➤

1

➤

➤

5

➤

➤

9

➤

➤

4

➤

➤

3

➤

➤

8

➤

➤

6 ➤➤

328D LCR Hydraulic Excavator specifications

Shoes850 mm

Long Stick3200 mm

Lift Capacities – Reach Boom (6150 mm)All weights are in kg. Heavy Lift On.

*4200 *4200 7.85*6100 *6100 *4000 *4000 9.05

*8000 *8000 *6550 6500 *3900 *3900 9.80*10 800 *10 800 *9050 8750 *8050 6350 *6000 4850 *3950 *3950 10.24*13 550 12 500 *10 350 8350 *8750 6150 *7450 4750 *4100 3900 10.40*15 700 11 650 *11 550 7950 *9350 5950 7450 4650 *4300 3900 10.30

*7000 *7000 *16 550 11 200 *12 200 7650 9500 5750 *7400 4600 *4700 4050 9.94*7450 *7450 *11 100 *11 100 *16 200 11 100 *12 200 7500 9400 5700 *5300 4400 9.29

*11 850 *11 850 *16 600 *16 600 *14 850 11 150 *11 350 7550 *8750 5700 *6400 5200 8.26*16 150 *16 150 *12 200 11 400 *9200 7700 *5650 *5650 6.66

9.0 m7.5 m6.0 m4.5 m3.0 m1.5 m

–1.5 m–3.0 m–4.5 m

0 m

1.5 m 3.0 m 4.5 m 6.0 m 7.5 m

m

9.0 m

Load Point Height Load Radius Over Front Load Radius Over Side Load at Maximum Reach

* Limited by hydraulic rather than tipping load.The above loads are in compliance with hydraulic excavator lift capacity ratings standard ISO 10567, they do not exceed 87% of hydraulic lifting capacity or 75% of tipping capacity. Weight of all lifting accessories must be deducted from the above lifting capacities.

R3.2CB2mm 3200

mm 6920

mm 10 560

mm 8040

mm 2990

mm 6260

mm 3400

mm 10 770

mm 11 110

mm 6760

m3 1.2

kN 179

kN 130

Working Range – Reach Boom (6150 mm)

Stick Length

1 Maximum Digging Depth

2 Maximum Reach at Ground Level

3 Maximum Loading Height

4 Minimum Loading Height

5 Maximum Vertical Wall Digging Depth

6 Minimum Front Swing Radius

7 Maximum Reach

8 Maximum Cutting Height

9 Maximum Digging Depth 2500 mm Level Bottom

Bucket HD

Bucket Force (ISO 6015)

Stick Force (ISO 6015)

15328D LCR Hydraulic Excavator specifications

Front LinkageStick Reach 3200 mmBucket Linkage CB2 Family

GuardingFalling Object Guarding System

(FOGS)

Engine/Power TrainPrefilter, AirStarting, Cold Weather Package

Two additional maintenance freebatteries

High capacity starter motorHeavy-duty cableJump-start receptacleEither aidBlock heater

UndercarriageTrack Shoes (mandatory attachment)

600 mm triple grouser850 mm triple grouser

Miscellaneous OptionsBlade, 3190 mm widePlate new machine certificateDevice SLCV Reach BoomAuxiliary stick lines (high pressure

and medium pressure)

Optional EquipmentOptional equipment may vary. Consult your Caterpillar dealer for specifics.

Standard Equipment Standard equipment may vary. Consult your Caterpillar dealer for specifics.

Electrical65 Ampere alternatorHeavy duty maintenance free batteriesLights workingFrame mountedCab mountedBoom mountedSignal/warning HornPre-Start monitoring system – checks

for low fluids(engine oil, coolant, hydraulic oil) prior

to starting machine

Operator EnvironmentAir conditioner, heater, defroster with

automatic climate controlAM/FM Radio with antenna and

2 speakersAshtrayBeverage/cup holderBolt-on Falling Object Guarding System

(FOGS) capabilityCoat HookConverter, 5A-12VFloor mat, washableInstrument panel and gaugesJoysticks thumb wheel, console

mounted, pilot operatedLight, interiorLiterature compartmentMirrors – left and rightMonitor, full graphic color displayNeutral lever (lock out) for all controlsOpenable and retractable two-piece front

windshield

Polycarbonate side windowsPositive filtered ventilation,

Pressurized cabRear window, emergency exitSeat, suspension, with high back and

head restSeat belt, retractableSun shade (for skylight)Sky-light, pop-up, polycarbonateTravel control pedals with removable

hand leversWindshield wiper and washer

Engine/Power TrainCat C7 ACERTAir Intake HeaterAir-to-air Aftercooler (ATAAC)24V Electric StartingHydraulic electronic unit injectors

(HEUI)2300 m Altitude capability without

derateAutomatic engine speed control with

one touch low idleCoolingProtection of 43°C to -18°C at 50%

concentrationElectric Priming PumpStraight line travelTwo speed auto-shift travelWater separator in fuel lineWater level indicator for water separator

GuardsHeavy duty bottom guards on upper

frame

Heavy duty travel motor guards onundercarriage

Track guiding guard, full lengthSwivel guard on undercarriage

HydraulicsAuxiliary boom lines (high pressure and

medium pressure)Tool Control

Combined function (one way highpressure circuit for hammerapplication, function for 1-way or 2-way high pressure)

Medium pressure circuitTool selection (via monitor 10 tools)

UndercarriageGrease lubricated trackHeavy-duty rollersHydraulic track adjustersIdler and center section track guardsStep – Six

Other Standard EquipmentAutomatic swing parking brakeBoom lowering control deviceBooms Reach 6150 mmCounterweight – 7720 kgCaterpillar one key security system with

locks for doors, cab and fuel capFine swing controlFully pressurized hydraulic systemHeavy Lift modeS•O•SSM quick sampling valves for

engine and hydraulic oilTravel AlarmWiring provision for Product Link

®

www.CAT.com

© 2006 Caterpillar

All Rights ReservedHEHH3329 (07/2006) hr

328D LCR Hydraulic Excavators

Materials and specifications are subject to change without notice.Featured machines in photos may include additional equipment.

See your Caterpillar dealer for available options.