3 gt auxiliaries
TRANSCRIPT
-
7/31/2019 3 GT Auxiliaries
1/18
May 24, 2012 PMI Revision 00 1
GT AUXILIARYSYSTEMS
-
7/31/2019 3 GT Auxiliaries
2/18
May 24, 2012 PMI Revision 00 2
Shaft Driven Auxiliaries
-
7/31/2019 3 GT Auxiliaries
3/18
May 24, 2012 PMI Revision 00 3
GT Support Systems
On - Base systems
-
7/31/2019 3 GT Auxiliaries
4/18
May 24, 2012 PMI Revision 00 4
GT Support Systems
Inlet System Air Filter, Air intake duct , APU
Exhaust System
Exhaust duct , Exhaust dampers, By-pass stack
Enclosure
Ventilation system
Fire fighting system
Water wash system
Control cabinet
Motor Control Centre
D.C. System
Oil mist eliminator
-
7/31/2019 3 GT Auxiliaries
5/18
May 24, 2012 PMI Revision 00 5
Enclosure
On-Base or Off-Base type
Noise containment
Protection from weather Fixed volume for ventilation
Part of the package
Exterior appearance
-
7/31/2019 3 GT Auxiliaries
6/18
May 24, 2012 PMI Revision 00 6
Exhaust System
Options in configuration
Exhaust duct and by-pass stack
Diverter damper
Guillotine Damper
Generally internally insulated
Stack Size based on emission requirements
-
7/31/2019 3 GT Auxiliaries
7/18
May 24, 2012 PMI Revision 00 7
Ventilation System
Heat dissipation to maintain safe temperature
To limit hazardous area expansion
Positive pressure ventilation Induced draft ventilation
2x 100% philosophy for vent fans
Control dampers available
-
7/31/2019 3 GT Auxiliaries
8/18
May 24, 2012 PMI Revision 00 8
Oil Mist Eliminator
Recovery of oil vapour
Fan and coalescent filters used
Common for entire GTG and gear box
Located outside GTG
-
7/31/2019 3 GT Auxiliaries
9/18
May 24, 2012 PMI Revision 00 9
Control Cabinet
Local control room
Houses all control and electrical systems
Self contained control room
Usually used for outdoor installations
-
7/31/2019 3 GT Auxiliaries
10/18
May 24, 2012 PMI Revision 00 10
Motor Control Centre
Dedicated LT MCC for GT auxiliaries
Tailored to meet specific operational needs
Auto-changeover possible
-
7/31/2019 3 GT Auxiliaries
11/18
May 24, 2012 PMI Revision 00 11
D.C.System
125V DC system
Battery and Charger
Lead-Acid/ SMF / Ni-Cad batteries
Dual cum Boast float charger
Sized to meet operational needs
-
7/31/2019 3 GT Auxiliaries
12/18
May 24, 2012 PMI Revision 00 12
Control System
Microprocessor Based Integrated Controls
Novel Speedtronic Mk-V system of GE Self contained control and protection system
State of art communication features
Triple redundancy in processors and controls
-
7/31/2019 3 GT Auxiliaries
13/18
May 24, 2012 PMI Revision 00 13
Control System
Major Protections
Overspeed
Over temperature
Loss of flame
Vibration
Lube oil / Hydraulic oil parameters
Fire
Loss of ventilation
Electrical protections
Customer specfic
-
7/31/2019 3 GT Auxiliaries
14/18
May 24, 2012 PMI Revision 00 14
Control System
Triple redundancy in processors
Separate processors for control and protection
Remote control possible
Networking of control systems
Integrated control systems of Co-gen / CCP
Single push button start
True black start capability
-
7/31/2019 3 GT Auxiliaries
15/18
May 24, 2012 PMI Revision 00 15
Water Washing System
On-line / Off-line Washing Washing of fouled compressor
For heavy fuels turbine washing envisaged
Use of detergent for cleaning
Manifolds provided on base
On-line washing reduces need for frequent Off line washing
Self contained water washing skid provided
-
7/31/2019 3 GT Auxiliaries
16/18
May 24, 2012 PMI Revision 00 16
Fire-Fighting System
Dedicated F-F system for GT & auxiliaries
Most times Generator included
Co2 / FM200 based system
Meets NFPA requirements
Initial and Extended discharge philosophy
Cylinder banks for storage
Separate control system
On-line weighing system introduced
Detection on Heat-rise / UV principle
-
7/31/2019 3 GT Auxiliaries
17/18
May 24, 2012 PMI Revision 00 17
Water Washing System
On-line / Off-line Washing Washing of fouled compressor
For heavy fuels turbine washing envisaged
Use of detergent for cleaning
Manifolds provided on base
On-line washing reduces need for frequent Off line washing
Self contained water washing skid provided
-
7/31/2019 3 GT Auxiliaries
18/18
May 24, 2012 PMI Revision 00 18