2013 catalog - southcommmedia.cygnus.com/files/cygnus/document/vspc/2013/oct/2013-heavy... · 2013...

www.snapon.com 1Offer expires October 31, 2013Limited Quantities.

2013 CATALOG

2013 Catalog2 **Small Balance Extended Credit (SBEC) payments based on 26 weeks at 1%. Weekly payments are estimated with approved credit. See important credit notice on back cover. Limited quantities. Participating Franchisees only. Offer expires October 31, 2013. Offer cannot be combined with any other trade in or discount.

YA9340 $40.50 $36.45Blue-Point® Serpentine Belt Ratcheting Wrench• Use to release any serpentine belt tensioner with

½" square drive opening on Series 60 Detroit Diesel®, some Caterpillar® engines, and buses/vans where the engine shrouding is in the way

HSA716 $33.15 $31.49Haldex® Systems Truck Slack Adjuster (H/bg" Deep Hex)• For brake service and slack adjuster installation on

trucks with Haldex automatic slack adjusters

• Use to turn the manual adjuster hex

BSA916 $49.80 $47.31Bendix® Systems Truck Slack Adjuster (J/bg" Deep Hex)• For brake service and slack adjuster installation on

trucks with Bendix automatic slack adjusters

• Use to turn the manual adjuster hex

L872RM $103.95 $93.5536" Knurled Locking Button Handle (¾" Drive)

L53HB $129.95 $116.9529" Plain Locking Button Handle (1" Drive)

• Lubricant is sealed in and damaging dust, dirt and moisture is sealed out

L872 $239.95 $215.95¾" Drive Ratchet Head

L873 $422.95 $380.651" Drive Ratchet Head

DUAL 80® TECHNOLOGY BASED RATCHETS• Dual pawl design with patented sealed head that keeps out dirt and other contaminants

• 7 teeth in contact with gear to provide strength and durability

• Up to 25% less ratcheting arc to engage the next gear tooth

• Built for strength, precision and durability

SL80A $149.95 $134.95½" Drive Ratchet With Standard Long Handle

SLX80A $224.95 $202.45½" Drive Locking Ratchet With Standard Extra Long Handle

SLF80A $199.95 $179.95½" Drive Ratchet With Standard Extra Long Handle

SR80A $149.95 $134.95½" Drive Quick Release Ratchet With Standard Handle

S80A $141.05 $126.95½" Drive Locking Ratchet With Standard Handle

SHLF80A $214.95 $193.45½" Drive Ratchet With Soft Grip Extra Long Handle

SHRLF80A $219.95 $197.95½" Drive Quick Release Ratchet With Soft Grip Extra Long HandleBTQSHD400

$536.85 $482.95Blue-Point 4pc 1" Drive Torque Stick Set• Covers most common

heavy-duty truck applications

• Sizes range BD/bg" to 1½" and 33mm

XDHRM604 $233.50 $210.154pc 12-Point Metric Ratcheting Box Wrench Set• Up to 80 gear teeth requires minimal

movement in tight areas

• Longer length increases leverage

BT4651 $75.00 $71.25Rockwell Style Brake Slack Adjuster Set• Includes offset, reversible automatic slack adjuster

wrench and automatic slack adjuster release tool

• Use on Rockwell® and Arvin Meritor® slack adjusters

TQR600E $850.00 $765.00¾" Drive Click-Type Detached Ratchet Torque Wrench (200 to 600 ft. lbs.)• Accurate within ±4% of any CW setting from 20% to 100% of full scale

• Thumb screw type adjustment setting is displayed in window

• “Split Beam” measuring element provides accurate, reliable reading and eliminates the heavy coil spring used in similar products

• Innovative design that provides consistently accurate readings and rugged, trouble free performance

• Accurate to ±4% clockwise and ±6% counterclockwise from 20% of full scale to full scale

• Each torque instrument, as calibrated at the factory, is certified to meet the accuracy specified

QD4R600 $775.00 $697.50¾" Drive Fixed Ratchet Adjustable Click Type Torque Wrench (100 to 600 ft. lbs.)

UTK150 $30.00 $28.50 Auto Loading Utility Knife

• Longer length increases leverage to break free stubborn fasteners

• New head design for increased strength and durability

• Great for head bolts on heavy duty applications

SN36 $169.95 $152.9536" Breaker Bar

TPMA25 $31.50 $28.3525' Tape Measure (Inches)

$14.68** Per Week • 26 WeeksS

BEC

TER

MS


BEC

TER

MS


BEC

TER

MS


BEC

TER

MS

HAND TOOLS

www.snapon.com 3 **Small Balance Extended Credit (SBEC) payments based on 26 weeks at 1%. Weekly payments are estimated with approved credit. See important credit notice on back cover. Limited quantities. Participating Franchisees only. Offer expires October 31, 2013. Offer cannot be combined with any other trade in or discount.

BD10ESG $97.85 $88.00Blue-Point 10 lb. Sledge Hammer• Fiberglass handle dampens vibration

for extra strength and safety

• Handle is epoxy-welded to hammer head

BP1004S $107.35 $96.95Blue-Point 4pc Hickory Handle Hammer Set• Durable handles that will not dry rot, warp or splinter from

exposure to the elements and resist most shop chemicals

• Includes 8, 12, 16 and 24 oz.

BC4SG $66.25 $59.50Blue-Point 4 lb. Cross Peen Hammer

BD4SG $63.75 $56.95Blue-Point 4 lb. Engineer's Hammer• Fiberglass handle dampens

vibration and provides extra strength

• Handle is epoxy-welded to hammer head

• Designed to remove brake anchor pins & bushings on 16½" "Q type" S-cam tractor & trailer brake systems from Dana-Spicer®, Arvin-Meritor (Rockwell)®, Eaton®, Timkin® & Fruehauf® vehicles

• Removes brake pins and bushings without removing wheel hub

407LDH $630.25 $566.957pc ¾" Dr. Chrome Socket Set• Covers sizes from 1 9/16” to 2”

411LDH $546.75 $491.9511pc ¾" Dr. Chrome Socket Set• Covers sizes from 3/4" to 1 1/2"

• Includes side-hole retention for secure attachment to drive tool

PPC710BK $209.95 $188.9510pc Punch & Chisel Set

PPCL60BK $167.95 $150.956pc Long Pin Punch Set (not shown)

BLPPB704 $159.40 $142.95Blue-Point® 4pc Prybar, Pinch Bar & Chisel Set (not shown)• The anvil ends on Snap-on® punches and chisels

are machined to a modified parabolic curve for slow metal displacement

• Reduced mushrooming, chipping and splitting

SPBH30G, SPBH30O & SPBH30R $124.95 $112.45 each30" Crown Handle Striking Prybar

SPBH48G, SPBH48O & SPBH48R $165.95 $149.35 each48" Crown Handle Striking Prybar

SPBH54G, SPBH54O & SPBH54R $184.95 $166.45 each54" Crown Handle Striking Prybar• Cylindrical design with taper allows user to find

a comfortable grip regardless of hand size

• ¾" square bar manufactured from special alloy steel, precision forged and heat treated for optimum strength and durability

• Exclusive crown handle offers protection from off-center hammer strikes

• Handle is 10 D/i" long for control

BC110B $211.85 $189.95Blue-Point 8 lb. Dead Blow Sledge Hammer• Deliver sustained impact and maximum

striking force with almost no rebound

• Non-sparking, chemical resistant covering

HBR25 $101.20 $89.95Blue-Point 2.5 lb. Brass Hammer

• Non-sparking / non-marring flat surface

• Brass head has a nominal 30 C Rockwell hardness that absorbs blow and reduces rebound

HBFE48 $73.55 $66.0048 oz. Soft Grip Dead Blow Hammer• Internal steel canister with free-flowing

steel shot improves dead blow action while reducing rebound

• Composite handle shank improves balance while defusing shock and dampening vibration

SGDP64IRBR $31.25 $28.00#4 Phillips® Snap-on® Instinct® Screwdriver

SGD10BR $31.25 $28.0010" L Flat Instinct Screwdriver• Tri-Lobe design offers multiple grip points for

power, speed and finesse

• Hex bolster allows a wrench to be used for added torque

SGDXXL20BR $87.95 $78.952pc Extra Long Instinct Screwdriver Set With Soft Grip Handles• Automotive: hose clamps & wiring assembly

attachment

• Heavy Duty/Truck: trailer light access & reaching into engine bays & interior compartments

• Industrial/Trades: overhead work, access for pipe strapping & HVAC

CJ2002 $559.95 $503.95Gear Puller Set• Capacity from 6 to 10 tons, use on Pitman arms,

timing gears, carrier side bearings and more

• Makes any of 10 different puller configurations

CJ85A $412.95 $371.95Truck Differential Side Bearing Puller

CJ950 $95.95 $86.352 D/i" Bearing Separator

CJ951 $209.95 $188.954 ½" Bearing Separator

CJ952 $359.95 $323.956 B/i" Bearing Separator

TAP1 $319.40 $287.46Truck Anchor Pin & Bushing Press Kit


BEC

TER

MS


BEC

TER

MS


BEC

TER

MS


BEC

TER

MS


BEC

TER

MS

HAND TOOLS

2013 Catalog4

S6194 $44.50 $40.00½" Square Drive Head Bold Impact Socket (12mm)• Use on universal joint flange

bolts on Ford trucks

• 4B/i" L

S6197 $41.95 $37.75½" Drive 12-Point Driveline Impact Socket (½")• Use on Kenworth and

Peterbuilt heavy duty drivelines

S6160 $49.80 $44.95½" Square Drive Extra Long Head Bold Impact Socket (12mm)• Use on universal joint flange

bolts on Ford trucks

• 8" L

312SIMDM $359.05 $322.95

207IPDFM $272.00 $244.957pc D/i" Drive 6-Point Shallow Swivel Impact Metric Socket Set (10mm, 12mm to 15mm, 17mm, 18mm)• Welded pivot pin reinforces

socket wall and allows full 30˚ uninterrupted, smooth action for efficient power transfer at any angle

IPRD20 $53.50 $48.00½" Drive 12-Point Low Profile swivel Impact Socket (F/i")• Starter bolts found

on International, Caterpillar and Cummins engines

SIMML332 $74.25 $66.95¾" Drive 6-Point Long Impact Socket (33mm)

SIMML333 $85.25 $76.501" Drive 6-Point Long Impact Socket (33mm)• Designed for the Budd Wheel

uni-mount applications—hub piloted semi-truck wheels so the nose of the gun does not rub against the hub

• Flank Drive wrenching system grips the fastener on the flats, increase torque and prevent rounding corners

• Heat treated to a lower hardness than hand sockets to withstand repeated cycling loads of impact wrenches

• Thin wall design and uniform wall thickness provides greater access and improved performance

• Made with special alloy content steel for a stronger, more durable socket

304IMX $159.95 $143.954pc ½" Drive Impact Extension Set (3", 5D/dc", 11¼" & IP80D Universal Joint)

204IMXA $89.95 $80.954pc D/i" Drive Impact Extension Set(1¾", 3", 6", 11")

S6224 $53.75 $48.00½" Drive ¾" Extra Deep Impact Socket• Specialty socket for 30/30 Air

Brake Chamber on Heavy Duty Trucks and Garbage Trucks

• Extra-long design (6") allows quick and safe removal of long threaded brake release stud assemblies

FLANK DRIVE® IMPACT SOCKETS

IPDF12A $37.00 $33.00D/i" Drive 12-Point Shallow Swivel Impact Socket• Perfect for Ford® F550 Truck drive

shaft bolts, U-Joint bolts for GM® trucks, MT 45 Freight Liner drive shaft bolts, drive shaft bolts on school buses, drive line bolts on New Holland® and Case® wheel loaders

S6213 $48.15 $43.00½" Drive 12-Point U-Joint Strap Bolts Impact Socket (13mm)• Use to remove U-Joint strap bolts

found on Volvo®, Mack® and other engine applications

S6260 $49.10 $44.00½" Square Drive 12-Point Spicer Drive Impact Socket (½")• For removal of spicer drive shaft

bolts found on Kenworth, Peterbilt and other heavy duty engine applications

12pc ½" Drive Deep Impact Metric Socket Set (15mm to 25mm, 27mm)

LAWM19E $62.25 $56.00¾" Drive Impact Bit Socket (19mm) • For removing or installing

Caterpillar head bolts

T802E $57.25 $51.50¾" Square Drive TORX® Impact Socket

T902E $57.25 $51.50¾" Square Drive TORX Impact Socket• For Meritor® brakes on big buses (T802E)

• Use on Case excavator final drive (T902E)

204FIHC $86.00 $77.004pc D/i" Drive Hose Clamp Socket Set (H/bg", ½", 8mm and 10mm)• Designed for extra long band clamps

found on Freightliner®, Peterbilt®, Kenworth® & International® trucks; plus Caterpillar® Acert® & Cummins® ISX engines

IMFDL242 $54.30 $48.95¾" Drive Impact Socket• Designed to remove head bolts

on Caterpillar C12, C15, C16 and 3406E engines

S6190 $55.30 $49.95¾" Drive IPR Sensor Impact Socket• 6.0L diesel injection pressure regulator

(IPR) socket for Ford vehicles

GLA72A $47.75 $42.95¾" Internal Drive by 1" External Drive Adaptor (2F/i")

BWD483 $120.00 $108.001" Drive Dual Opening Impact Socket• 1½" Hex; BD/bg" Square

BWD482 $92.05 $82.95¾" Drive Dual Opening Impact Socket• 1½" Hex; BD/bg" Square

BWDS483 $120.05 $108.001" Drive Dual Opening Impact Socket• Designed to engage only short inner nuts

313SIMD $382.00 $342.9513pc ½" Drive Deep Impact Fractional Socket Set (½" to 1¼")


BEC

TER

MS


BEC

TER

MS

**Small Balance Extended Credit (SBEC) payments based on 26 weeks at 1%. Weekly payments are estimated with approved credit. See important credit notice on back cover. Limited quantities. Participating Franchisees only. Offer expires October 31, 2013. Offer cannot be combined with any other trade in or discount.

HAND TOOLS

www.snapon.com 5

DTRCFM114 $374.95 $337.50 14pc Deep Well Thread Chaser Set• National Coarse Chasers

(D/i"-16NC to F/i"-11NC), National Fine Chasers (D/i"-24NF to F/i"-18NF), Metric Chasers (12mm-1.25 to 16mm-1.50)

BLPBC36 $126.15 $113.50Blue-Point 36" Heavy Duty Bolt Cutters • Center cut jaw configuration provides

balance while cutting

FDT1116 $129.30 $116.374pc Fuel Disconnect Tool Set• Includes 4 fuel line disconnect tools - straight & a 90˚

angle—for the 11.8mm & 16mm fuel lines

• The OEM tool sets only include the 90˚ tools—the straight tools allow access into tight areas

SP7882 $121.60 $115.52Blue-Point Diesel Injector Height Gauge Set• 5-in-1 gauge set covers all applications for Detroit

Diesel® 50 and 60 series engines

• 7.5˚ offset to get at hard-to-reach fasteners

• Heat-treated forged steel for increased strength, durability and reduced wear and breakage

• Flank Drive grips the flats, providing up to 20% more turning power than a conventional wrench

• Flank Drive Plus open end with Flank Drive wrenching system box end (SOEX only)

• 12-point box end is set at a 15˚ offset for additional clearance

SOEX34 $85.25 $76.75 (1B/bg") SOEX36 $102.00 $91.80 (1B/i")SOEX38 $105.00 $94.50 (1D/bg")SOEX40 $115.00 $103.50 (1B/e")

OEX34B $80.75 $72.50 (1B/bg")OEX36B $98.00 $88.00 (1B/i")OEX40B $108.00 $96.95 (1B/e")OEX42B $110.00 $99.00 (1F/bg")OEX48B $144.00 $129.50 (1B/c")

BLPADJ703 $222.45 $199.95Blue-Point® 3pc Adjustable Wrench Set• Inch & metric scales on fixed jaw indicate wrench opening

• Fixed jaw and handle forged in one piece to ensure maximum strength

• Hardened jaws with inwardly angled teeth for a stronger more secure grip on object

• Adjusting screw makes locking the position easy

FCT706 $101.95 $91.95Blue-Point Fan Clutch Wrench

SP500 $206.95 $185.95Blue-Point Diesel Timing Gauge Set• For 1994 to 1998 Cummins®

"B" engines used in Dodge® Ram® 250/350 pick-up trucks and some Ford® Trucks and service J.I Case® tractors and off road equipment

TIFHD160 $134.20 $120.78Blue-Point Trick Truck Inflator• Inflate heavy-duty truck tires quickly and safely

• Gauge measures from 6 to 160 PSI

GA359 $43.95 $39.50 Dual Foot Air Chuck

• For 2001 and later 6.6 liter GM® Duramax® diesel truck engines

• Holds the engine in place for high torque requirements

SRT1 $138.45 $124.50Truck Wheel Seal Removal Tool• Remove seals intact without damaging the bearings

• Use on steering, drive and trailer wheel seals

YA6925 $33.10 $29.75Blue-Point Flywheel Lock

FLANK DRIVE® & FLANK DRIVE PLUS WRENCHES

• Speed open end provides quick, ratchet-like action

• Box end offset 15˚ for clearance

• Reversible ratcheting 12-point Flank Drive wrenching system box end

SRXRM710 $385.00 $346.5010pc Ratcheting Open End/Box Metric Flank Drive Wrench Set (10mm to 19mm)

PWZ3 $107.60 $96.953½" Adjustable Jaw Pliers Wrench

• Use on International® (VT365, T444E, DT466, DT350 and HT530), Ford® Power Stroke (7.6L and 6.0L), Detroit Diesel® (Series 40) and John Deere® engines

• 24½" L for maximum leverage

SRPC107 $174.15 $156.957pc Snap Ring Plier Set• Longer 45˚ and 90˚ jaws

make it easier to access hard to reach snap rings

• Pivot screw converts from internal to external

HP300 $283.80 $254.95Blue-Point Large Blind Rivet Kit

• Includes 3 nosepieces, 21" extra long riveter, a bag of 50 KLIK-SPLIT® rivets

YA4022 $93.15 $83.95Blue-Point Long Reach Oil Filter Pliers (23" L) • Use on over tightened oil, fuel and hydraulic

filters plus fuel sending units

• Wraps around and holds irregular shaped objects like oil filters and mufflers

FWA62121A $26.95 $24.25Blue-Point Oil Filter Wrench Cup• Adjustable filter wrench for 62MM to

121mm diameter oil filters

• D/i" square drive, ¾" external hex

CW24A $86.35 $77.50Chain Wrench (23" Chain; 24" Handle)


BEC

TER

MS


BEC

TER

MS


HAND TOOLS

2013 Catalog6

CDR7850H $580.00½" Drive 18V Lithium Cordless Hammer Drill• 450 in. lbs of torque output• 22-position clutch with 2 speed

gearbox provides torque control• Integrated battery management prevents

battery drain• Built in LED

CDR6850 $471.00 ½" Keyless Chuck 18V Ni-Cad Cordless Drill (not shown)• 22-position clutch

CGG4850 $450.00 18V Ni-Cad Cordless Grease Gun

AT670 $620.95 $557.95Blue-Point ¾" Drive Impact Wrench• 1,050 ft. lbs.

max torque

• Lightweight composite housing with aluminum nose

CTRS6850 $426.00 18V Ni-Cad Cordless Reciprocating Saw• Quick-release mechanism for one-handed

blade change without a tool

• Sealed nose mechanism keeps dirt out

• Turbine-style cooling system runs cooler

• Includes Ni-Cad battery, charger and case (not shown)

CT7850 $685.00½" Drive 18V Lithium Cordless Impact Wrench• 450 ft. lbs of torque output• Digital microprocessor controlled switch

maximizes performance and runtime• Integrated battery management

prevents battery drain• Built in LED

CT6850 $590.00½" Drive 18V Ni-Cad Cordless Impact Wrench (not shown)• 400 ft. lbs. torque output

CT661 $300.00 270.00D/i" Drive 7.2V Lithium Cordless Impact Wrench

CTS661 $269.00 $242.007.2V Lithium Cordless Screwdriver• Nearly twice the torque of the

7.2V Ni-Cad series

• Variable-speed toggler trigger

• Includes 2 batteries, charger and case (not shown)

PTS1000 $289.95Reciprocating Air Saw with Dual-Chuck Mechanism• Dual chuck accepts 0.035" standard air saw blades

and 6" L reciprocating saw blades

• Can cut 1/8" (3mm) thick mild steel

• Low vibration—for less user fatigue

• Featherable paddle trigger with safety lever for easy operation

• Smooth cutting action

• Rugged, reversible right angle drill gets in tight spots comfortably

• Lightweight (2.53 lbs.) helps avoid fatigue during prolonged use

AT4135 $53.95 $48.50Air Adjustment Blow Gun With Bent Tube• Built in valve system improves trigger control

• Impact resistant material for longevity

• Galvanized blow tube for corrosion resistance

• Use in any sector of industry where compressed air is used

DBTBC129 $389.95 $350.95Cobalt Drill Bit Set

• For drilling at higher speeds in tougher drilling conditions

• Set includes 29 bits organized in a metal drill index box

MG725, MG725L & MG725P $459.00 each½" Drive Heavy Duty Air Impact Wrench• 810 ft. lbs. max torque

• 8 vane rotor that provides faster motor start up with more torque

• MG725L has 3" long anvil

• MG725P has pinned anvil

• Heavier piston produces a faster, harder hitting blow producing more power

• Dual elastomer cushions absorb shock and vibration to reduce user fatigue

PH3050B $372.00Super Duty Air Hammer

AT811 $215.00 $192.95 3/8" Right Angle Drill

• Tool operates down to -5°F

• 7,500 PSI hose is flexible in cold weather

• Pump housing tested to 20,000 PSI

• Includes 2 Ni-Cad batteries, charger & storage case (not shown)

YA772B $125.65 $112.95 Blue-Point® Automatic Air Grease Gun (40 psi–100 psi)• Pumps at a 40:1 ratio

with a maximum pressure of 6,000 psi• Heavy duty 18" flexible nylon hose improves

accessibility and reach

CAG6850DBKIT $145.00 $130.49Cordless Adhesive Gun• Professional grade tool and adhesives

• Low battery warning signal and auto shut off alarm

• 4 different types of adhesive sticks available

• High efficiency melt chamber

• Precision solid state temperature control

• 2 finger trigger and convenient back loading

• Tricolored operational lighting

• Battery and Charger sold separately


BEC

TER

MS


BEC

TER

MS


BEC

TER

MS


BEC

TER

MS


BEC

TER

MS


BEC

TER

MS


BEC

TER

MS

$22.37** Per Week • 26 WeeksSB

EC

TER

MS


BEC

TER

MS


BEC

TER

MS


POWER TOOLS

www.snapon.com 7

• 12,000 RPM max free speed

• For Heavy duty grinding with 3" ROLOC® pads & discs (not incl.)

• 7 ½" L and weighs only 2 lbs.

PT490 $349.95 1 HP Heavy-Duty 4” Angle Cut-Off Tool

PT400 $259.00 1 HP Straight Die Grinder• 25,000 RPM

max free speed

• For heavy duty grinding with 1/4" mounted points and 1/4" grinding burrs (not incl.)

• 7 ½" L and weighs only 1½ lbs.

PHG1005AK $237.95 $214.00 5pc Air Hammer Bit Set • Includes PHG51A, PHG55A, PHG61A,

PHG57A and PHG70A inKit Bag

• Machined blades for cleaner cuts, rips and removal of sheet metal, tail pipes and welds

• Power-to-Weight thermally balanced 1 HP air motor delivers 12,000 RPM of smooth cutting action at only 3½ lbs.

• Ergonomic comfort grip and Snap-on® Instinct side handle make for a low-impact workday

Snap-on Die Grinders• 1 HP Thermally balanced air motor• Dual taper collet system• Ergonomic comfort grip handle• Features Snap-on INSTINCT® Screwdriver Side

Handle (PT410 & PT450)

PT410 $310.0090˚ Angle Die Grinder

PT430 $259.95 1 HP Heavy Duty 3" Cut-Off Tool• Powerful Cutting–thermally balanced 1 HP air motor

delivers 25,000 RPM of smooth cutting action

• Increased Stability–internal cooling system routes air efficiently through the tool, reducing vibration and preventing overheating

PT450 $309.004½" Angle Grinder• 12,000 RPM max free speed

• Use for Grinding welds, surface clean-up and material removal

• 9" L and weighs only 3¼ lbs.

• 14.8" Length provides extended reach for easier access

• 0.7 Hp motor with 15,000 RPM max free speed

• Built-in regulator permits easy speed adjustment

AT154 $274.30 $245.95 Blue-Point 4" Extended Reach Cut-Off Tool

AT120L $185.00 $165.95Blue-Point ¼" Extended Reach Die Grinder

• Extended reach of 4¼" to gain access into limited work space

• Built-in speed regulator matches tool speed to the job

• Comfort grip reduces fatigue

• Safety throttle — release the lever and the tool turns off

• Super quite with only 77dBa

AT1300A $1,635.00 $1,470.95 Blue-Point® 1" Super Duty Impact Air Wrench• Fast, 4,000 RPM free speed – strong 3,000 ft. lb.

maximum torque output

• Workhorse performance for use on trucks, buses and heavy equipment

• Steel nose for rugged, demanding applications

• Pin clutch style impact mechanism for fast

startup and high torque requirements

• 1,800 ft. lbs. max torque

• 3-position speed control and full power reverse provides control when tightening or removing fasteners

• IM1800L has a 6" long anvil

IM1800 & IM1800L $1,055.00 each1" Drive Super Duty Air Impact Wrench

PDR5000A $423.00 ½" Reversible Air Drill• Top mounted forward/reverse switch

allows one-handed operation for convenience and to save time

• 5 vane air motor provides more drilling power to get the job done faster

• Over-molded cushion handle insulates from cold and vibration to reduce user fatigue

AT2050 $199.95 $179.95Blue-Point Heavy Duty Air Hammer• Intended for heavy-duty applications

such as cutting large bolts and rivets, separating ball joints, cutting heavy gauge sheet metal and riving bushings

• Includes quick change retainer

• Variable speed trigger with built-in air regulator

MG1250 Super Duty 3/4" Drive Air Impact Wrench

Not shown: MG1250L (w/3" Anvil) MG1250XL (w/6" Anvil) MG1250P (w/Thru-Hole Anvil)$849.00 each

• 1,200 ft. lb. torque output

• A more durable impact mechanism allows us to now offer a 2-year warranty

• Powerful twin-hammer mechanism for fewer moving parts

• 6-vane rotor for faster motor start-up

• 1pc magnesium housing weighs just 8.1 lbs. (3.7 kg) to reduce user fatigue

• Sealed-in oil bath lubrication filled with RED LINE® Synthetic Oil


BEC

TER

MS


BEC

TER

MS


BEC

TER

MS


BEC

TER

MS


BEC

TER

MS

$12.30* Per Week • 104 Weeks

EC

TER

MS


EC

TER

MS

*Extended Credit (EC) payments based on 19.8% and assumes a trade-in or cash down payment. Weekly payments are estimated with approved credit and vary based on actual finance charge. **Small Balance Extended Credit (SBEC) payments based on 26 weeks at 1%. Weekly payments are estimated with approved credit. See important credit notice

on back cover. Limited quantities. Participating Franchisees only. Offer expires October 31, 2013. Offer cannot be combined with any other trade in or discount.

POWER TOOLS

2013 Catalog8

EEHD183030S $1,789.99 $1,700.49Blue-Point® Pocket iQTM For Heavy-Duty Trucks with EOBD II & HDS Update• Monitors all vehicle data and displays trip data• Checks engine speed and load, pressures,

temperatures, and more• Supports, OBD II, J1708 and J1939 communication• Reads and clears inactive fault codes• Reads active fault codes

EEHD693004 $5,266.99 $5,003.64Pocket iQ Light Maintenance Apps Extreme

EEHD693015SO $1,102.00 $1,046.90Detroit kit Includes DDC

EEHD693024SO $1,247.00 $1,184.65Cat kit Includes Cat apps

EEHD693010SO $1,128.00 $1,071.60Navistar® kit Includes Nav apps

PBC4828 $2,499.95 $2,249.95 Dual-Filtered Parts Washer (48" x 28" x 14" tub)• Dual filter parts washers pro-

vide a clean supply of solvent for washing parts

• Filtration system virtually eliminates solvent changes• Composite dual stage filter provides continuous

filtration of solvent

SEPW20SHDE $7,325.85 $7,032.80Electric Powered 2000 PSI Pressure Washer• Instantly heats water to 200° F.• Includes ceramic plunger

pump with stainless steel valves, interchangeable nozzles, chemical injection, adjustable pressure, stain-less steel cold wrap around coil, Poly Fuel tanks and GFCI protection

EEDF400 $869.99 $782.95Diesel EGR Cleaning System

YA1009SS 11 Gallon Stainless Steel Wet-Dry Vac$778.90 $699.95• Industrial strength cleaning/drying

machines combine the highest degree of suction/airflow

• Ball bearing motor designs for strong performance with less motor strain

• Engineered for easy portability and long life

PBC42B $7,225.95 $6,502.95High Pressure Parts Washer• Blast parts clean using a

high pressure wand that sprays a heated biode-gradable soap solution

• Cleaning is performed inside a sealed compart-ment with a hinged lid that also includes an automatic soak cycle

• Features integral oil skimmer and screen filter to extend the life of cleaning solution

• Includes 12 gallon reservoir and a 25 gallon pail of YADW896 powdered soap.

YA4826PA $5,595.25 $5,034.95Abrasive Pressure Feed Clam Shell Opening Blast Cabinet• Pressurized media system cleans up to 4 times

faster than siphon systems• Auto refilling system eliminates the need to

refill hopper with media• Features a right hand door for smaller parts

and a unique clam shell lid that facilitates easy loading of large or heavy parts

YA437 $7,141.45 $6,426.95Abrasive Side Opening Blast Cabinet (not shown)• Designed for large items

and production volume cleaning• Turntable facilitates cleaning multiple parts

and provides the ability to rotate larger parts• Efficient 405 CFM dust collection system uses

three large Polysateen bags to separate dust from useable media, eliminating wasted media

YA4224 $3,263.05 $2,935.95Abrasive Top Opening Blast Cabinet (not shown)• Features a right hand door for smaller parts

and a top opening lid for larger parts• Designed for continuous use and reduced

operator fatigue

EEHD683004 $11,899.99 $9,995.99Extreme Heavy-Duty Truck Pro-Link iQ Kit• Easily diagnoses engine, brake, and transmission failures• Info clearly displayed with fast data downloads• Includes all current available diagnostic software, most

common adapters, fault code guide and case

EEHD188001 $2,979.99 $2,681.99Starter Heavy-Duty Truck Pro-Link iQ Kit

EEHD682014 $1,500.00 $1,380.00 Pro-Link iQ, ABS Suite (Wabco, Bendix & Trailer) • Includes: EEHD882021 Trailer ABS Suite

Software, EEHD888014 Meritor Wabco® Air & Hydraulic Software and EEHD889013 Bendix® ABS Software

EEHD682020 $1,700.00 $1,564.00 Complete ABS Software Kit for Pro-Link iQ - Software/PLC Adapter • Includes: EEHD882021 Trailer ABS Suite Software, EEHD888014

Meritor Wabco® Air & Hydraulic Software, EEHD889013 Bendix® ABS Software and EEHD602020 J560 PLC Adapter

Heavy duty blast cabinets with an industrial grade blast guns and foot pedal controls


BEC

TER

MS


BEC

TER

MS


EC

TER

MS


EC

TER

MS


EC

TER

MS


EC

TER

MS

$14.48*Per Week • 156 Weeks

EC

TER

MS


EC

TER

MS


EC

TER

MS


EC

TER

MS


EC

TER

MS


EC

TER

MS

$1,258.74 DOWN PAYMENT


EC

TER

MS



EC

TER

MS



EC

TER

MS



EC

TER

MS



EC

TER

MS




• Fast and efficient service thoroughly cleans and removes EGR manifold deposit buildup in diesel engines

• Removes carbon from diesel EGR cooler and induction system

• Designed to avoid costly engine tear down and component replacement

SHOP & TECH

www.snapon.com 9

EECS306C $3,800.00 $3,420.00 D-TACTM Elite (12/24V)• Diagnostic charger, battery,

starting & charging system tester, engine starter is heavy-duty ready

YA2624 $322.90 $290.60 12/24V Electric Battery Tester• Battery condition is shown in % of capacity• Tests both flooded lead acid and AGM batteries

EEJP500V24 $517.50 $465.7512/24V Jump Pack• 4,500 peak amps, 415 CCA• Twin high-output AGM batteries

EEDF500 $322.90 $290.60Duramax® Engine Fuel Pressure Test Set• Designed for testing diesel fuel pressure

and vacuum on GM® 6.6L Duramax engines

EEDF501 $376.75 $339.00Compucheck® Engine Fuel Pressure Test Set• Designed for diesel fuel

pressure and restriction testing on engines with Compucheck test ports

EEPD500 $207.00 $186.50Diesel Compression Gauge• Dial reads from 9 to 800 psi and

from 0 to 5500 kPa• Indispensable diagnostic tool for

determining diesel engine mechanical condition

SVTS263A$236.95 $213.25Air Powered Cooling System Pressure Tester

• Uses pressure regulated shop air to pressure test cooling systems for leaks

• Compatible with most cooling system adapters

SVTA6100$303.95 $273.506pc Large Truck Cooling System Adaptor Set• Test 8 different filler necks

when combined with the pump and TAB10036 from the SVTS262B, SVTS262C or SVTS263 sets

EECT24H $51.75 $43.996/12/24V Wiring System Circuit Tester• Smart LED design with Instinct® handle• 1¾" long probe. 4½" overall length. 6' cord

MT302BR (Red)MT302BG (Green) (not shown)MT302BO (Orange) (not shown)MT302BY (Yellow) (not shown) Remote Starter Switch $70.35 $63.32 each• 35A at 12V; 20A at 24V• 5' leads allow cranking engine

from sides or beneath auto while keeping hands away from moving parts

EEPI2250 $499.90 $449.95 2,250W Power Inverter• Stable, clean and reliable power

with high surge capacity (DC to AC)• Hard wire into tow trucks, construction,

fleets and military vehicles

MT257B $331.20 $298.00 Blue-Point® Diesel Pulse Adaptor• Test injector timing or engine rpm

on diesel engines equipped with ¼" or 6mm external steel fuel injector lines

EEDM504D $238.99 $214.95 Auto-Ranging Digital Meter With Manual-Ranging Features• AC/DC volts, AC/DC

millivolts, Ohms, Continuity, Diode, MicroAmps, milliamps, Amps, Hertz and Capacitance

• Easy fuse testing with fuse replacement design

EEDMRPMD $279.45 $251.50 Diesel Engine RPM Adaptor• Ideal for small diesel engine

applications• Measures diesel engine RPM• Range is 300 to 4,000 RPM• Use with DMM (sold separately)

EEDF502 $372.60 $335.50 Ford® Power Stroke® Vehicles Fuel Pressure Test Set• Helps prevent a lean

condition that may cause burning of injectors or scorched cylinders

MTTL800$159.99 $143.99 Modular Test Leads Kit• Exceptional versatility for most auto testing needs

BK8000 (Wireless) $995.00 $945.00 Advanced Digital Camera Videoscope

• Use to confirm mechanical problems before disassembly• 4.3" diameter touch-screen• Digital video and image capture with internal

memory and SD card storage• View straight ahead or at a 90˚ angle with 36" dual imager• Rechargeable lithium batteries in both viewer and imager• 3 mega-pixel rear-view camera allows technician to

document pre-service vehicle condition

BK8000-55 $279.95 $251.9536" 5.5mm Dual View Imager (not shown)

BK8000-56 $299.95 $269.955.5mm Dual View Imager - 2 Meter length (not shown)

BK6500 (Wired) $799.95 $759.95Digital Camera Videoscope (not shown)

EECS400A $599.99 $539.95 Wireless 6/8/12/24V Electronic Battery Tester • First in the industry to test

battery, starting and charging systems wirelessly

• World’s first remote system (up to 50' away)

• Now with 8V for golf carts

EELD500 $2,741.99 $2,467.79EVAP Smart Smoke® Machine• Industries first 100% portable

unit with remote control• 1 touch EVAP testing with

automatically performs Pass/Fail test with 0.010", 0.020" and 0.040"


BEC

TER

MS


BEC

TER

MS


BEC

TER

MS


BEC

TER

MS


BEC

TER

MS


BEC

TER

MS


BEC

TER

MS


EC

TER

MS


EC

TER

MS



SHOP & TECH

2013 Catalog10

Weld Single Pass Det. Opt. Alum. Model Amps Thickness Duty Cycle Feed Input Voltage Opt. TIG Pack Spoolgun

MM350XL 350A 7⁄16" 100% @ 350A Yes 208/230VAC FLEXTIG25 MHG5B MM250SL 270A 3⁄8" 100% @ 185A Yes 208/230VAC FLEXTIG25 MHG5BMIG220 220A 5⁄16" 60% @ 185A No 208/230VAC CKSTP2125A MHG5A

Snap-on® MIG Welders have higher duty cycles at maximum amperage for longer continuous weld times and performance that surpasses the competition.1. Wire feed assembly, constructed of precision-

machined cast aluminum, features all-metal gearing and 800 in/min. delivery for consistent wire speeds.

2. Capacitor bank and diode set deliver consistent voltage and industry-leading smooth-arc characteristics.

3. All-copper wound, tapped transformer features Nomex® insulation and bolted laminations to provide precise voltage control and repeatable welds.

MHG5A & MHG5B $1,399.75 $1,259.75 each Aluminum Spool Guns• Adds aluminum welding capabilities

EFPNSTLKRA$129.30 $116.37 Extreme Face Protector• The world’s first and

only unobstructed, 180˚ peripheral vision welding helmet

• Adjustable halo for maximum vision

• Made with light weight high-impact ABS plastic with military grade anti-scratch coating

WELDER & PLASMA CUTTER TECHNICAL SUPPORT

800-ABC-WELD

GLOVE502BLA & BXLA (Black) GLOVE502RLA & RXLA (Red-not shown) $53.95 $48.50 each SuperCuff® Heavy-Duty Gloves • Dual fingertip layers and gel padded

palms provide extra protection, while the SuperCuff design allows wrist freedom

• Provides enhanced knuckle and finger protection

GLOVE503RCL & RCXL (Red) GLOVE503HCL & HCXL (Hi-Vis, not shown) $60.95 $55.46 SuperCuff Heavy-Duty Carbon Gloves• Same features as the GLOVE501BLA,

but with a hard Carbon Knuckle helps protect from heavy impacts in knuckle and back of the hand area

GLASS40CEAR Clear Lens $18.95 $17.00 GLASS40GEAR Gray Lens GLASS40YEAR Amber Lens Blue-Point® Safety Glasses with Tethered Ear Plugs• Nylon slide allows for easy 4 1/2" extension and

retraction of tethered ear plugs

MM350XL $4,712.65 $4,241.39 350A “Muscle MIG” Welder

MM250SL $3,621.45 $3,259.30 270A “Muscle MIG” Welder (not shown)

MIG220 $2,395.00 $2,155.50 220A Workhorse MIG Welder

1

2 3

PLASMA60i $5,239.25 $4,715.33 55 Amp Inverter Plasma Cutter • Cuts ¾" and severs 1"

PLASMA50 $4,201.75 $3,781.5830A/50A Heavy-Duty Plasma Cutter (not shown)• Cuts ½" and will sever up to ¾"• 30A setting for lighter metals and

50A setting for heavier applications


EC

TER

MS


EC

TER

MS


EC

TER

MS


EC

TER

MS


EC

TER

MS


EC

TER

MS

*Extended Credit (EC) payments based on 19.8% and assumes a trade-in or cash down payment. Weekly payments are estimated with approved credit and vary based on actual finance charge. Weekly payments are estimated with approved credit. See important credit notice on back cover. Limited quantities. Participating Franchisees only. Offer expires October 31, 2013.

Offer cannot be combined with any other trade in or discount.

SHOP & TECH

www.snapon.com 11

TL900L $31.95 $28.50Blue-Point 9" Aluminum Lighted Level

ECFSP200A $189.95 $170.952 LED High-Output Rechargeable Shop Light• 120 degree optics for wide angle coverage• Includes 110V charger cord and base• 45% brighter than previous models

ECU4000 $140.70 $126.50 Dual Twin Utility Light• 4 tube, 26 W, 13 A fluorescent

bulb for high light output

YA662C $2,587.25 $2,328.53 Blue-Point 10-Ton Air/Manual Service Jack (27" Maximum Lift)• Features an air actuator pump to raise lift arm quickly

• T-handle for added maneuverability

• Foot pedal lift assist

• Handle actuated release valve

YA727B $2,939.20 $2,645.28 Blue-Point 1-Ton Hydraulic Transmission Jack (44" Maximum Lift)• Use on bus, truck and

construction vehicles

• 2 heavy cast adjustable mounting plates and wedges to support load

YA657C $1,236.05 $1,112.45 Blue-Point 4-Ton Hydraulic Service Jack (24" Maximum Lift)• T-handle for added maneuverability

• Handle actuated release valve

• Foot pedal lift assist

YA765D $1,272.80 $1,145.50 Blue-Point ¾-Ton Hydraulic Wheel Dolly• Handles dual and large

single wheels up to 52" in diameter

BPWORKBENCH $486.40 $437.50 Blue-Point Heavy-Duty Workbench• Dimensions: 60" x 30.73" x 34"• Weight Capacity: 1,200 lbs.

YA512 $237.90 $213.95 Blue-Point 12-Ton Jack Stands• Maximum Height: 27½"

• Minimum Height: 17½"

YA1731A $827.95 $745.16 Blue-Point® 22 Ton Air Operated Floor Jack• Adjustable extension

screw raises saddle height

• Uses standard shop air supply (110 psi to 175 psi)

• Rubber wheels allow ease in positioning

ECFLED6HO$109.95 $102.95 Blue-Point Rechargeable 6 LED Shop Light• Ultra bright, wide 90° illumination with spot top

YA660C $2,483.95 $2,235.56 Blue-Point 10-Ton Service Jack• Handle actuated release valve provides precise

metered control of lowering speeds

• Wide stance and low center of gravity provide optimum stability under load stress

YA667C $1,630.05 $1,467.05 Blue-Point 4 Ton Air/Manual Jack• Release valve provides control

of lowering speed• High speed Air Turbo Motor is equipped

to raise the load to the desired height efficiently, effortlessly, and safely

YA731B $1,551.70 $1,396.53 Blue-Point 20 Ton Air Service Jack• Large rubber wheels enhance mobility• Automatic valve prevents overloading• Extension screw permits pick-up height adjustment

WAM1100 $1,825.60 Wheel-A-Matic Turntable Set• 14" diameter, 10,000 lbs.

per wheel capacity

WAM0517 $380.50 Wheel-A-Matic® Scribe Type Toe Gauge• Pointers are adjustable to hub height

• Designed for 1 user to easily adjust toe

WAM1841 $513.20 Wheel-A-Matic Truck Front Slip Plate Set• Allows unrestricted movement

of front tires to make accurate adjustments

WAM1889 $229.00 Wheel-A-Matic Trailer Kingpin Extension• Makes fast, accurate measurements from the

kingpin center to the trailer tandems

WAM1890 $354.15 Wheel-A-Matic Tandem Tracker Set• Use with WAM1889

• Measure tracking of tandem axles easily

WAM1891 $182.10 Wheel-A-Matic Tandem Axle Spacing Caliper• Check the spacing between axles of tractors

and/or trailers

WAM0684 $611.00 Wheel-A-Matic Magnetic Wheel Alignment Gauge• Durable die-cast aluminum

with multi-pole magnet

• Camber: +8 degrees to -8 degrees

• Caster: +14 degrees to -6 degrees


BEC

TER

MS


BEC

TER

MS


BEC

TER

MS


BEC

TER

MS


BEC

TER

MS


BEC

TER

MS


EC

TER

MS


EC

TER

MS


EC

TER

MS


EC

TER

MS


EC

TER

MS


EC

TER

MS


EC

TER

MS


EC

TER

MS



SHOP & TECH

2013 Catalog12

NEvEr CompromisE WhEN it ComEs to storiNg your tooLs.TOOL STORAGE, MOBILE CARTS & CHESTS

KMC18043NOR (Orange) KMC18043NGR (Green) KMC18043NBK (Black) KMC18043NTN (Tan) (not shown) $750.00 each7 Drawer 18" All Weather Mobile Tool Chest• Waterproof and dust proof design• Drawers fully extend on proprietary composite slides• Telescoping trolley handle with higher reach• Urethane casters for smooth rolling

KERN682B4 $11,670.0068" EPIQ Double Bank Roll Cab With Stainless Steel Power Top• InPulse™ Drawer Action: Flush finish drawers with uncompromising

strength are easier to open, easier to close and don't drift open• ISO-Ride® System: 7”x2" Swivel lock mag wheels with independent

torsion spring suspension • PowerTop™: Stainless steel work surface with integrated power source• EPIQ™ Strength: Designed for a lifetime of use with more load capacity• Available in 12 colors

KRA2423 $5,795.0073" Classic 96 Roll Cab• Full double wall construction features two full layers of heavy duty steel for

strength and durability• Two extra wide 50" drawers• Z-shaped stiffeners between walls prevent creases to the outside walls• Reinforced gussets inside each corner help protect corners from racking• Available in 8 colors

KRSC100A $1,745.002 Drawer Mobile Workstation

KRSC101 $1,995.003 Drawer Mobile Workstation• 1,000 lb capacity and 38 x 26" top work surface has raised edge all the way around• 8" semi soft swivel lock casters, extra heavy duty weight capacity will go over obstacles

that stop ordinary carts• 4” and 6" InPulse™ drawers retain up to 20x the weight of standard detents without

drifting open• Convenience drawer large enough for short term storage of work in progress parts• Available in 10 colors


BEC

TER

MS


EC

TER

MS


EC

TER

MS

KRSC100A KRSC101


EC

TER

MS



EC

TER

MS


Extended Credit (EC) payments based on standard rates and assumes a trade-in or cash down payment where indicated. Weekly payments are estimated with approved credit and vary based on actual finance charge. Please be aware that the weekly payment is an estimate only and may not apply to you. Your actual payment may be different than the estimated financing payment shown. All credit sale contracts are subject to approved credit and the terms of the standard Snap-on Credit credit sales contract form. Not all applicants will qualify. Taxes, installation, and costs of financing, such

as charges for filing UCC statements or insurance premiums, are extra. Weekly payments shown are based on suggested list prices and your price may vary. Terms and interest rates may vary and such terms and interest rates are subject to change without notice. In the event you fail to make payments when due, the terms of the contract will apply and late charges may be due. Please contact us regarding finance terms and restrictions. While every attempt is made to ensure accuracy, errors during publication can occur. Product features and specifications can change. Pricing can change. Limited quantities. Participating Franchisees only. Offer expires October 31, 2013. Offer cannot be combined with any other trade in or discount. Snap-on, Flank Drive, Flank Drive Plus, Dual 80, Pro-Link iQ, Pocket iQ, Instinct, Smart Smoke, D-TAC, InPulse, ISO-Ride, PowerTop and

Blue-Point are trademarks of Snap-on Incorporated ©Snap-on Incorporated 2013. All Rights Reserved. All other marks are trademarks of their respective holders. Printed in U.S.A. Snap-on, 2801 80th Street, Kenosha, WI 53143

HD2013

TOOL STORAGE

2013 catalog - southcommmedia.cygnus.com/files/cygnus/document/vspc/2013/oct/2013-heavy... · 2013...

Documents