2012 annual report moving the needle - pace | … · 2013-05-13 · 6 2012 annual report 7 92% of...
TRANSCRIPT
Partners for the Advancement of Collaborative Engineering Education
2012 AnnuAl RepoRt2 3
This annual report is made possible through the contributions of Autodesk, HP, Oracle and Siemens PLM Software.
PACE Partners tour new UPRM Student Project Center at the Mayagüez campus
The PACE Partners welcome Hochschule RheinMain University of Applied Sciences to PACE
President Miguel Muñoz receives the PACE Plaque
Student demonstrates the NX software
Ken Kelzer, Global Vehicle Chief Engineer, GM, welcomes UPRM to PACE
State Secretary Ingmar, Hochschule RheinMain President Dr. Detlev Reymann, Opel Board Deputy Chairman Dr. Thomas Sedran, and Ruesselsheim Mayor Patrick Burkhard
University of Puerto Rico
PACE formally welcomed the University of Puerto Rico Mayagüez (UPRM) to PACE on May 3-4, 2012. President Miguel Muñoz and Chancellor Jorge Rivera-Santos joined José R. Pérez-Riera, Secretary of Economic Development and Commerce of Puerto Rico and members of the PACE Partner companies and in a ribbon cutting ceremony at the Central Administration Building in San Juan the morning of May 3rd.
PACE Partner company speakers included Ken Kelzer, Global Vehicle Chief Engineer, GM; Luiz Carlos Scavarda do Carmo, Vice-Reitoria Administrativa, Pontifical Catholic University of Rio de Janeiro (PUC-Rio), for Autodesk ; Alfredo Trevino, Vice President Mesoamerica Operations Siemens PLM Software; Jose Fernando Melendez, Enterprise Business Manager and Managing Director Puerto Rico and Caribbean, HP; and Jaime Matus, Managing Director Oracle Caribbean.
UPRM engineering students displayed their work on a variety of projects, including the PACE Sustainable Urban Transport (SUT) project. Company representatives from Siemens, Oracle, and CD-adapco visited the Mayagüez campus on May 4th for technical presentations on the PACE software products, and tours of the new student project center.
RheinMain University of Applied Sciences
Hochschule RheinMain celebrated its PACE partnership with a ceremony in the Adam Opel Haus on October 19, 2012 in Russelsheim, Germany. President Detlev Reymann and Dean Moniko Greif were joined by Ingmar Jung, Parliamentary State Secretary at the German Federal Ministry of Education and Research, and Patrick Burkhardt, Lord Mayor of Russelsheim. Dr. Thomas Sedran, Deputy Chairman of the Opel Management Board ; Gunther Diesenroth, Strategic Account Manager, Siemens PLM Software; Detlev Reicheneder, Senior Industry Manager Automotive, Autodesk; Christian Wollheim, HP; and Britta Wolf, Senior Program Manager Oracle Academy , Oracle were on hand from the PACE Partner companies.
Following the ceremony, visitors toured the CIM Center laboratory, viewed student demonstrations, and attended technical presentations by selected PACE company members.
PACE Welcomes New InstitutionsLetter from PACE Core Team
Cumulative Contributions
PACE paves the way for
our students to become
more competitive and a
better workforce in the
STEM global market.
Dr. Mohammad Kamal HossainTuskegee University (USA)
“
”
PACE welcomed two new institutions during formal media events in 2012. The PACE announcement events celebrate each institution’s inauguration as a PACE Institution, and include tours of the PACE Laboratories, as well as student displays and company technical presentations. PACE media events take place after the institution has been part of PACE for more than a year and has begun to integrate the PACE software into the curriculum.
Year Yearly Total* Overall Total*
2012 $ 794,764,758 $ 11,454,875,902
2011 $ 501,211,575 $ 10,660,111,144
2010 $ 348,618,352 $ 10,175,258,766
2009 $ 126,813,844 $ 9,826,640,414
2008 $ 1,889,779,973 $ 9,686,953,993
2007 $ 1,837,355,001 $ 7,797,174,020
2006 $ 2,007,794,971 $ 5,959,819,019
2005 $ 682,854,012 $ 3,952,024,048
2004 $ 574,441,059 $ 3,269,170,036
2003 $ 903,410,937 $ 2,694,728,977
2002 $ 1,071,862,140 $ 1,791,318,040
2001 $ 532,278,419 $ 719,455,900
2000 $ 131,753,981 $ 187,177,481
1999 $ 55,423,500 $ 55,423,500
*All totals shown in U.S. dollars
$12
$10
$8
$6
Bill
ions
$4
$2
20122008 2009 2010 2011
PACE continues its mission to develop the future leaders of the global Product Lifecycle Management (PLM) team. By enhancing engineering and design academic curricula, and engaging undergraduate students as early as freshmen, PACE plays a key role in increasing retention rates of graduating students in Science, Engineering, Technology, Mathematics (STEM) career fields. Through PACE, institutions engage in activities that lead to successful global collaboration between and among faculty, students and industry.
The PACE Program continues to grow, reaching 57 institutions, five partner and 17 contributor companies in 2012. PACE welcomed the University of Puerto Rico at Mayagüez and RheinMain University of Applied Sciences (Germany) at media events in May and October. New contributor company Synopsys provides software for modeling and simulation of power, physical and multi-domain systems to PACE institutions worldwide.
Our global projects and course competitions provide opportunity for students to develop professional skills through multi-university/ multi-cultural teams, using PACE state-of-the-art CAD/CAM/CAE and collaboration software, and applying PLM tools and concepts. Students and faculty work directly with technical experts as mentors from PACE companies to solve real-life industrial challenges.
In 2012, project competitions such as the Innovative Mobility Systems one-year industrial design project competition involving six universities, and the first two-year global collaborative project, the Sustainable Urban Transport project competition with seven teams from 22 universities, were successfully completed. The 2012-14 two-year
Portable Assisted Mobility Device (PAMD) concept-to-production project challenge was also initiated.
More than 20 course competitions in first through fifth year courses take place annually at PACE Institutions. PACE global course competitions involve multiple institutions in several countries, adding the element of global collaborative teams. Additionally, industry representatives participate as judges, interacting with students to provide valuable feedback.
Over 300 delegates from university and industry met face-to-face in Shanghai, China at the 2012 PACE Annual Forum “Powering Global Collaboration” to present papers, discuss projects, share curriculum advancements, develop relationships for research, and discuss new technologies.
The Executive Sponsor Council approval in 2012 of institution certification will increase program value for institutions, students, companies and PACE overall. Certification will be implemented in a phased approach with U.S. institutions in 2013 and non-U.S. beginning in 2014.
The product of PACE is the next generation of designers and engineers. The PACE Core Team, the Executive Sponsor Council, and the hundreds of volunteers around the globe continue their commitment to and passion for this goal! As we always say: PACE is what you make of it!
The PACE Core Team: Vass Theodoracatos, GM Thom Tremblay, Autodesk Rob Link, HP Keith Rajecki, Oracle Hulas King, Siemens PLM Software
Partners for the Advancement of Collaborative Engineering Education
2012 AnnuAl RepoRt4 5
Nineteen PACE institutions now participate in the Oracle Academy Advanced Computer Science. The program provides university faculty with Oracle database and Middleware software and curriculum, which in turn gives students the opportunity to gain hands-on experience with Oracle’s database technologies. PACE Institutions may also use the Oracle database software with the Siemens PLM Software Teamcenter product data management application.
• Purdue University, Virginia Tech and University of Waterloo assisted Siemens in launching the Learning Advantage Gold Membership Program with over 1,000 self-taught Tutorials for NX, Teamcenter and Tecnomatix.
• Siemens PLM Software was recognized by US Black Engineer & Information Technology magazine as a “TOP Supporter” of historically black engineering schools in the U.S. for the 11th year in a row, and was selected as a “Best Diversity Company for 2012” by Diversity /Careers in Engineering & Information Technology magazine, through its partnership with Prairie View A&M University, Tuskegee University, University of Texas at El Paso and New Mexico State University.
• Siemens supported the four PACE Institutions participating in the EcoCAR2 program - Wayne State University, Purdue University, University of Waterloo and Virginia Tech - along with with fellow sponsors Argonne National Labs, US Department of Energy, General Motors, National Resources Canada, CD-adapco, MathWorks, and dSPACE.
• Siemens Teammates participated as Judges in the PACE Global Courseware Competitions.
• Brigham Young University, Georgia Tech and Virginia Tech are members of the National Science Foundation E-Design Center, along with Siemens PLM and GM as Industry Partners.
• General Motors recognized Siemens’ Product Lifecycle Management (PLM) software business unit as one of its best global automotive suppliers on Wednesday, March 13 during its 21st annual Supplier of the Year awards ceremony. The event was held at the Charles H. Wright Museum of African American History in Detroit.
“PACE Wins” from Siemens PLM Software
“PACE Win” from Oracle Corporation
Synopsis
Synopsys, Inc. is a world leader in electronic design automation software, providing tools for semiconductor and complex integrated circuit design, verification, and manufacturing. GM’s global engineering teams use Synopsys Saber for the design and development of electrical systems and wire harnesses. As a PACE Contributor, Synopsys offers a streamlined process for PACE Institutions to receive the Saber software, as well as training classes and access to online training and documentation.
PACE Welcomes New Contributor CompanyPACE is much more
than “just” a program.
I don’t know any similar
network, which helps
students and faculty
from all over the world
to connect and
collaborate so easily.
Dr.-Ing. Manuel Löwer RWTH Aachen University (Germany)
“
”
While the product of PACE is the student - the next GM employee - on the technology side PACE works to duplicate the GM IT tool network among the PACE Institutions, in order to create a robust infrastructure that raises the bar in engineering education globally and prepares the next generations of GM employees. We continuously strive to improve this immense network with state-of-the art technology following GM’s lead.
Notable “wins” involving PACE Institutions and the PACE Partner companies in 2012 include:
Synopsys representative Shirly Lu meets with PACE Forum attendees
Hulas King, Siemens PLM Software, presents certificate to PACE student
PACE Forum attendees at Company Display Expo at 2012 PACE Forum
The best part of the
program is
collaborating with the
best minds in the world
through the PACE
Annual Forums and
through interactions
between industry
representatives and
students throughout
the duration of various
PACE projects. THANKS
PACE!
Dr. Sam Anand and Professor Brigid O’Kane University of Cincinnati (USA)
“
”
PACE Partner Company “Wins”
Partners for the Advancement of Collaborative Engineering Education
2012 AnnuAl RepoRt 76
92% of PACE Design Institutions used Autodesk Alias Automotive as their primary CAD system for Industrial Design.
More than 970 students at PACE Institutions used NX CAM in thirty manufacturing engineering courses.
PACE Curriculum in Creative Design
PACE Curriculum in Manufacturing Engineering
•11PACEInstitutions increased the number of CAD/CAM/CAE-related courses in their curriculum in the past year.
•20PACEInstitutions restructured the CAD/CAM/CAE-related courses in their curriculum in the past year.
•157Students from PACE Institutions achieved the Siemens GO PLM NX certification.
•45Students from PACE Institutions achieved other CAD certification.
PACE Curriculum in Engineering
The program provides
software, hardware and
grants to PACE
universities, which are
important resources for
our university to enhance
the infrastructure for
digital engineering.
Dr. Xiaobo Peng Prairie View A&M University (USA)
“
”
Number of Engineering Courses that Utilized NXSoftware
20122008 2009
27
2022
PACE Institutions with an AutomotiveEngineeringCurriculum
2010 2011
2223
Percentage of Students Who Used NXVersusaCompetitiveSoftware
20092008
79%75%
2010 2011 2012
75% 73% 72%
2008 2009
2725
Number of PACE Engineering Institutions that IntroducedNXintheFirstYear
2010 2011 2012
27 28 28
252
289
2008 2009 2010 2011 2012
285299
264
Primary CAD System in PACE Engineering Institutions
NX
44
SolidW
orks
6
Catia
7So
lidEd
ge
4
ProE
2
AutoC
AD
4
Number of CAE-Related Course Offerings
2008 2012
381 379
2009
402
2010 2011
383 399
Percentage of Design Students Who Used Alias AutomotiveVersusaCompetitiveSoftware
Number of Creative Design Courses that Utilize AliasAutomotiveSoftware
Percentage of PACE Design Institutions that IntroduceAliasAutomotive in the First or Second Year
Number of DigitalManufacturingCoursesUsing Tecnomatix
Number of StudentsWhoUsedTecnomatix
Percentage of PACE Design Institutions that IntroduceSketchbookProin the First or Second Year
2008
2008 2012
2008 2008
2008
2008
2009
2009
2009 2009
2009
2009
2010
2010
2010 2010
2010
2010
2011 2012
2011
2011 2012 2011 2012
2011 2012
2011 2012
65
58% 58%
21519
86%
88%
77
50%
15 387
90%
67%
81
45%
9255
87%
67%
87
72
50%
14
10
418
335
83%76%
67% 67%
PACE faculty and students receive Siemens GO PLM NX Certification during PACE Annual Forum
Partners for the Advancement of Collaborative Engineering Education
2012 AnnuAl RepoRt 98
Faculty and support staff developed numerous PACE-inspired textbooks, tutorials, and other unique teaching materials in the past year, including:
• The University of Texas at El Paso provides lectures and tutorials on the “UTEP Engineering Channel” of YouTube (http://www.youtube.com/user/UTEPengineering)
• Shanghai Jiao Tong University revised a geometric dimensioning and tolerancing module to use Teamcenter Visualization VSA (Siemens PLM Software) and 3DCS Analyst (Dimensional Control Systems)
• The University of Puerto Rico Mayagüez developed STAR-CCM+ (CD-adapco) tutorials for a fluid dynamics course
• Prairie View A&M University created a series of NX 7.5 tutorials for a mechanical engineering design lab course
• TU Darmstadt faculty authored three online NX tutorials titled “Introduction to CAD 2012,” “CAD/CAM Process Chain with NX at the Process Learning Factory,” and “Principles to CAD/CAE” (in German)
• The University of Cincinnati produced ten full training DVDs on Maya (Autodesk) covering topics such as: modeling and texturing a self portrait; modeling; lighting and rendering a still life; basic photogrammetry and UV layout: ambient occlusion; HDRI and light baking; Maya to second life workflow; basic animation principles (forward and inverse kinematics); Maya to after effects workflow; Maya and camera tracking workflow; Maya to game engine (unity3d) workflow
• The University of Ontario Institute of Technology developed self-learning digital-voice-over-video digital laboratory manuals for NX 7.5
• Dalhousie University developed tutorials to assist students with the CAD assignments in an engineering design course
• Missouri University of Science and Technology refined the MSC ADAMS (MSC Software) tutorial used in a dynamics course
• RWTH Aachen University developed HTML-based NX 8 tutorials
• Tongji University created an Alias Studio (Autodesk) standard textbook
• University West created NX exercises for an engineering CAD course
More than 360 PACE faculty, TAs and staff participated in PACE-sponsored software training in 2012. Software training opportunities are available at the PACE Annual Forum, local company training centers, and university locations.
PACE CoursewarePACE course competitions provide students with the opportunity to present their class projects to industry experts, and receive valuable feedback. PACE company representatives observe how the students use the PACE software, as well as project and presentation skills, potentially resulting in internship or employment opportunities. PACE course competitions encourage faculty and students to use digital data, math models, and PACE software in engineering, manufacturing and industrial design courses.
InstitutionName CourseName StudentYear
Georgia Tech Interactive Computer Graphics and Computer 4th year Aided Design
Hongik University Introduction to Mechanical Design Process 3rd/4th year
Inha University Computer Aided Drafting 1st year
Inha University General Design of Mechanical Engineering 3rd/4th year
Instituto Politecnico Nacional Modelado y Simulacion 2nd year
Instituto Tecnológico Autónomo Computer Aided Design 3rd year de México
Korea University Computer Aided Mechanical Drawing 2nd year
Lehigh University Manufacturing Process 3rd year
Michigan Technological University Engineering Modeling and Design 1st year
Michigan Technological University Computer Aided Design Methods 4th year
Northwestern University Computer Integrated Manufacturing 3rd year
Politécnico di Torino Disegno Meccanico (Mechanical Drawing) 1st/2nd/3rd year
Shanghai Jiao Tong University Mechanical Engineering Design 2nd year
Sungkyunkwan University CAD/Product Information Management 3rd/4th year
Sungkyunkwan University Digital Manufacturing/PLM 3rd/4th year
Tongji University Fundamentals of CAGD 2nd year
University of São Paulo Engineering Graphics and Design 1st year
University of São Paulo Best Automotive Engineering Capstone Project 4th/5th year
Brigham Young University, CAx Engineering Applications Varied & ITESM-Toluca
Virginia Tech, Technische Universität Global Collaborative Engineering Design 4th/5th year Darmstadt, Shanghai Jiao Tong University, Howard University, ITESM-Monterrey
PACESoftware Students Students Students 2012 2011 2010
Altair HyperWorks 2,821 2,497 3,014
ANSYS FLUENT 2,746 1,394 1,492
ANSYS TGrid 230 25 68
Autodesk DirectConnect 76 62 71
Autodesk Maya 525 423 388
Autodesk Moldflow 216 218 n/a
Autodesk Sketchbook Pro 678 411 456
CD-adapco STAR-CCM+ 407 68 n/a
CEI EnSight 50 81 n/a
Dassault Isight 224 228 124
DCS 3DCS Analyst 30 25 31
dSPACE 25 n/a n/a
Gamma GT Power 169 102 201
LSTC LS-DYNA 371 184 330
MathWorks MATLAB 10,065 n/a n/a
MathWorks Simulink 2,054 n/a n/a
MSC Adams 3,293 2,557 1,816
MSC Nastran 3,635 2,761 3,408
RTT DeltaGen 34 100 25
Siemens JT Open 144 68 84
Siemens Teamcenter 1,648 1,223 1,185
Siemens Tecnomatix 335 418 255
PACESoftware 2012
Altair HyperWorks 94
ANSYS FLUENT 5
CD-adapco STAR-CCM+ 13
MathWorks MATLAB 70
MathWorks Simulink 61
MSC Software Adams/Nastran 12
Siemens NX 81
Siemens Teamcenter 18
Siemens Tecnomatix 4
PACE Course Competitions
PACE Students Use Software PACE Software Training for Faculty and Students
PACE Sponsored 21 course competitions at 20 PACE Institutions in 2012, with more than 1600 students participating.
The software grants
significantly contribute to
provide current industrial
applications for
universities.
Dr.-Ing. Manuel Löwer RWTH Aachen University (Germany)
“
”Schools
Competitions
20122008 2009
2022
21 21
1715
2010 2011
25 26
2022
Partners for the Advancement of Collaborative Engineering Education
2012 AnnuAl RepoRt 1110
• 240 Attendees from 46 PACE Institutions and 12 PACE Companies, representing all 12 PACE Countries
• Dr. Xu Min of Shanghai Jiao Tong University spoke about the Multi-disciplinary Electric Vehicle Project at SJTU, and Dr. Yu Chen of Tongji University spoke about the China Rural Vehicle project
• 11 Industry presentations from 7 companies, including addresses by - Raymond Bierzynski, Executive Director
Electrification Strategy, GM China Group- Kevin Eustace, Senior Vice President
Product–Driven Services, Siemens PLM Software
- Desmond Jiang, Director of Manufacturing Industry China, Autodesk
- Samuel Lo, Senior Director, Strategy Planning and Corporate Development for Oracle Greater China
• 87 Faculty and student delegates attended 9 PACE software training sessions in NX, Teamcenter, Tecnomatix, STAR-CCM+, FLUENT, and MathWorks
• Representatives from 10 PACE Companies met with conference delegates during the Company Display Expo
• Deborah Murphy, Director GM China Engineering, and Shirley Lu, GMIO IT Regional Manager, joined faculty members from Wayne State University, Tongji University, TU Darmstadt, and New Mexico State University in a panel discussion of the challenges and barriers facing women in engineering
• A collaboration workshop led by Greg Jensen of Brigham Young University provided guidance and insight on developing effective organization and communication in global teams
• 24 Faculty presentations and 18 posters from 26 PACE Institutions around the world
• PACE Project judging competitions for the- Sustainable Urban Transport (SUT) global
collaborative project with 22 PACE Institutions
- Innovative Mobility Solutions (IMS) global design project with six PACE Design Institutions
- Collaboration and Innovation Challenge (CIC) project
• Awards for outstanding presentations in- Engineering: Dr. Greg Jensen, Larissa
Cannon, Tom Nysetvold, Glen Phelps, and Joshua Winn of Brigham Young University
- Design: Brigid O’Kane of the University of Cincinnati
- Manufacturing: Mark Richardson of Monash University
- Curriculum: Dr. Victor Cruz of Instituto Tecnológico Autónomo de México (ITAM)
- Training: Bob Chalou of Michigan State University
• Outstanding Poster awards presented to- Dr. Kwanju Kim of Hongik University- Anand C R, Bhushan Deshmukh, and
Praveen Nahar of National Institute of Design
• Bob Chalou of Michigan State University received the PACE Distinguished Integrator award
• Detlef Bielohlawek of GME Adam Opel received the PACE Distinguished Global Administrator award
• Technical tours of Shanghai GM assembly plant, GM China Engineering advanced materials and battery labs, Tongji University, and Shanghai Jiao Tong University
PACE Global Annual Forum
PACE Laboratory Award
The establishment of
collaborative relationships
with companies in the
PACE consortium and the
other academic
institutions in the PACE
program is a plus.
Dr. Xiaoping Du Missouri University of Science & Technology (USA)
We are very excited to
continue developing
PACE projects and to
keep a very close relation
with local industries and
with other PACE
universities. Thanks for
the opportunity and
your effort.
Dr. Jorge Alejandro Rodriguez Melendez ITESM Toluca (Mexico)
“
“”
”
The seventh PACE Global Annual Forum was co-hosted in Shanghai, China by Shanghai Jiao Tong University, Tongji University, and GM China. This annual face-to-face gathering is the most important single enabler toward achieving our mission to develop the “product lifecycle management (PLM) team of the future…” This year’s theme, “Powering Global Collaboration” focused on the various aspects required for successful collaborations between and among faculty, students, and industry.
The 2012 Forum was extended to four days to better accommodate the project judging competitions for the Sustainable Urban Transport (SUT) global collaborative project (year 2), the Innovative Mobility Solutions (IMS) design project, and the first annual Collaboration and Innovation Challenge (CIC) project.
Congratulations to the Prairie View A&M University PACE Teamcenter Lab for winning the 2012 PACE Laboratory Award! This annual award recognizes one PACE Institution for creating an outstanding laboratory that supports the development of the automotive product lifecycle management (PLM) team of the future.
The PVAMU Teamcenter Lab provides a state-of-the-art collaborative engineering design environment with hardware and software to support the education and research activities related to PACE projects and other collaborative projects. The multimedia communication tools and distance learning system enable students to complete design, analysis, review, and collaboration tasks simultaneously within one lab.
2012 PACE Annual Forum Highlights
Participant Feedback
What part of the PACE Annual Forum was most valuable to you?
30% Student Project Presentations & Competitions25% Networking & Collaborating16% Presentations12% Software Training7% Technical and Cultural Tours9% Other Activities: Company Displays, Collaboration Workshop, Cultural Awareness, etc.
PACE LaboratoriesPACE labs provide a hands-on learning environment where students can utilize CAD/CAE/CAM tools, collaborate on projects, and employ rapid prototyping.
TypeofPACELab 2012 2011 2010
CAD Lab 50 48 47
CAE Lab 26 27 21
Collaboration Lab 22 18 17
Digital Manufacturing Lab 10 13 12
Prototype Lab 21 13 4
Other Labs 11 16 15
Partners for the Advancement of Collaborative Engineering Education
2012 AnnuAl RepoRt 1312
The PACE Global Leadership team sponsored a one year project for the 2011-2012 academic year for industrial design students, in order to keep these schools engaged as the second year of the SUT project shifted to in-depth engineering development. The Innovative Mobility Solutions (IMS) project challenged industrial design students to develop concept solutions for an urban environment, including ride sharing, car sharing, and/or vehicle on-demand options. Concept solutions were to be integrated with the urban infrastructure and public transportation. Vehicle concepts could be autonomous or manually driven, and included the integration of networking and social aspects.
Students from College for Creative Studies (USA), Howard University (USA), ITESM-Monterrey (Mexico), Monash University (Australia), National Institute of Design (India), and the University of Cincinnati (USA) presented their concepts to a judging panel of industry and academic design experts during the 2012 PACE Annual Forum in Shanghai. Winners were selected in eight categories (see graphic on right).
The PACE Global Leadership team initiated the annual Collaboration and Innovation Challenge (CIC) in response to feedback from the PACE Institution faculty for an alternative, smaller-scale project to showcase innovative projects at PACE Institutions and further develop the application of the PACE tools. Project proposals are accepted from June 1 – October 1 each year, and a select number are invited to present at the PACE Annual Forum. Recognition is given to the best project(s) judged by a team of industry representatives, PACE partner companies, and academic representatives.
PACE Innovative Mobility Solutions (IMS) Industrial Design Project
PACE Collaboration and Innovation Challenge (CIC) Project
PACE global projects are excellent opportunities for students to enrich their professional skills through participation in multi-university and multi-cultural teams, as well as the hands-on experience with PACE state-of-the-art design, engineering, manufacturing, and collaboration software, and the application of product lifecycle management (PLM) tools and concepts.
Population increases, energy alternatives, traffic congestion, and vastly improved connected networks require the automotive industry to examine the needs for transportation in the urban setting. The 2010-2012 PACE global collaborative project addressed the emerging needs for the Next Generation of Sustainable Urban Transportation (SUT).
During the first year of the SUT project, teams of engineering and industrial design students conducted market research, developed design concepts and preliminary engineering/manufacturing solutions, and then reported their results at the 2011 PACE Annual Forum. In the second and final year of the SUT project, the teams refined their design concepts/ solutions through more in-depth analysis of the vehicle subsystems and the manufacturing plan, and addressed the gaps and weaknesses in their original designs. The industrial design schools played a less prominent role in the second year, as the project focus shifted to the detailed engineering and manufacturing analysis.
More than 75 engineering students from 21 PACE Institutions represented the six SUT project teams at the 2012 PACE Annual Forum, and presented their results before the judging panel. Judges evaluated the teams against a comprehensive list of engineering and manufacturing criteria, including project management and collaboration strategy. The winners were announced during the Awards Dinner (see graphic on right).
PACE Global Collaborative Projects
The SUT project is a real
motivation for students
to not just work on a real
project but the excitement
of communicating and
networking with students
from all over the world.
Mack Haley Director of Special Projects, College of Engineering, New Mexico State University (USA)
The best part of the
program are the
enormous collaboration
opportunities provided for
students so they can gain
global experience.
Dr. Xiaobo Peng Prairie View A&M University (USA)
“
“
”
”
PACE Sustainable Urban Transport (SUT) Global Project: Second Year
PACE SUT Team 2 students celebrate winning 1st Place in the project competition
Poster displays for the Innovative Mobility Solutions competition
University of Cincinnati student Brendan Oberkircher receives trophy from Gaowa Wulin, Design Director GM China Advanced Studio
1st Place 2025 Approved for Production
Team 2 RWTH Aachen University (Germany)
Northwestern University (USA) Hongik University (Korea)
Inha University (Korea) Tuskegee University (USA)
2nd Place 2025 Approved for Production
Team 3 PES Institute of Technology (India)
Sri Jayachamarajendra College of Engineering (India) Michigan Technological University (USA)
New Mexico State University (USA) Universidad Iberoamericana (Mexico)
3rd Place 2025 Approved for Production
Team 5 ITESM-Monterrey (Mexico)
ITESM-Toluca (Mexico) Virginia Tech (USA)
Sungkyunkwan University (Korea)
Vehicle Most Ready for 2015 Production Team 1
University of Cincinnati (USA)
2012 PACE Collaboration and Innovation
Challenge Winner
The Energy Reclamation Application (ERA) presented by students
Vaishnavi Seetharama and Vidhey V Rao led by
Dr. V. Ramesh of Sri Jayachamarajendra College of Engineering
The ERA uses a vehicle’s exhaust gas
to generate electricity and run electronic equipment such as the HVAC system,
audio system, power windows/ seats/doors, etc.
Most Innovative Concept Monash University
Best Customer & Regional Research National Institute of Design
Best Creative Research & Concept Development ITESM-Monterrey
Best Functionality and Human Factors University of Cincinnati
Best Collaboration University of Cincinnati
Best Interior Design Concept University of Cincinnati
Best Exterior Design Concept College for Creative Studies
Best Overall Design Concept University of Cincinnati
PACE Institutions * - 2011
The new 2-year global collaboration project for 2012-2014 was launched during the PACE Annual Forum with a call for institution commitment and team formation. The Portable Assisted Mobility Device (PAMD) project maintains an urban transportation focus, and addresses the first and the last mile scenario as it mixes seamlessly with public transportation and personal urban transportation. Teams are challenged to design a small power assisted vehicle that can be taken on a train or bus, or can be stowed or carried indoors.
In the first year of the project, teams will develop PAMD concepts including research, market assessment, design process, engineering analyses, manufacturing assessments, and a final design proposal, including a non-running scale model. Each team consists of one Industrial Design Institution and multiple Manufacturing and Engineering Institutions. One school is designated as the “lead” or “host” school for each team, leading
not only the team organization but also the building of a functional prototype during the second year. Thirty-two PACE Institutions are participating in the PAMD project, comprising a total of seven global collaborative teams.
PACE Portable Assisted Mobility Device (PAMD) Project KickoffAustralia
Monash University
BrazilUniversity of São Paulo
CanadaDalhousie University
McMaster University
Queen’s University
University of British Columbia
University of Ontario Institute of Technology
University of Toronto
University of Waterloo
ChinaJilin University
Shanghai Jiao Tong University
Tongji University
GermanyRheinMain University of Applied Sciences
RWTH-Aachen University
Technische Universität Darmstadt
IndiaNational Institute of Design PES Institute of TechnologySri Jayachamarajendra College of Engineering
ItalyPolitécnico di Torino
MexicoInstituto Politécnico Nacional
Instituto Tecnológico Autónomo de México (ITAM)
ITESM – Estado de México
ITESM – Monterrey
ITESM – Toluca
Universidad Iberoamericana
South KoreaInha University
Hongik University
Korea University
Sungkyunkwan University
SwedenUniversity West
United StatesArt Center College of Design
Brigham Young University
College for Creative Studies
Georgia Institute of Technology
Howard University
Kettering University
Lehigh University
Massachusetts Institute of Technology
Michigan State University
Michigan Technological University
Missouri University of Science & Technology
New Mexico State University
Northwestern University
Prairie View A&M University
Purdue University
Rensselaer Polytechnic Institute
Tuskegee University
University of Cincinnati
University of Michigan – Ann Arbor
University of Pennsylvania
University of Puerto Rico
University of Texas at El Paso
Virginia Tech
Wayne State University
There are many “best
parts” in the PACE
Program…PACE gives our
Faculty and Students the
opportunity to work with
people from other
universities and to work
with mentors from
the industry.
Alan Steeves University of British Columbia (Canada)
Many excellent students
have improved themselves
and found their interests
in the PACE projects and
they are more ambitious
to seek for their future
developments. Some are
now working at General
Motors, some are
working at GM joint
ventures in China, some
are at world renowned
vehicle suppliers and some
are even studying for a
PhD engineering degree in
the US.
Dr. Qing Jia Tongji University (China)
“
“
”
”Monash University student Dominic Dowling posing with tape drawing of a PAMD concept
15Partners for the Advancement of Collaborative Engineering Education
14 2012 ANNUAL REPORT