2005 odyssey - scosche · 2015-10-09 · honda 2005 odyssey images front speaker rear tweet 1....
TRANSCRIPT
+12V Constant = WHITE/GREEN
+12v Acc. Switched = YELLOW/RED
-12V Chassis Ground = BLACK
+12V Illumination = RED/BLACK
+12V Dimmer = RED
Amp Remote = N/A
LF+ = GREEN/BLACK
LF- = LT. GREEN
RF+ = GREEN/TELLOW
RF- = GREEN/RED
LR+ = BLUE/WHITE
LR- = BLUE/BLACK
RR+= PINK
Dash Type :
Kit:Harness:Antenna Adapter: STD-ADT
Interface Adapter(s): N/A
About the Vehicle
Make: HONDA
Model: ODYSSEY
Year: 2005
In Dash Application
Wire Color Codes
Speaker Notes
Front Speaker Sizes
Speaker Adapter : N/A
Factory Assembly: Plastic housing with (3) PHS Screws
Rear
ODYSSEYHONDA
2005
CUSTOM
TBA
HA08
RR- = BLUE/YELLOW
Factory Assembly : Plastic housing with (3) PHS Screws
NOTES
Lower Door : 6 1/2" Midrange
Speaker Sizes
Dimensions:DOOR Dimensions: DASH W= 2-1/2'' L= 2-1/2'' D= 1''
Dimensions: W= 5-5/8'' L= 5-5/8''D= 3-1/4''
NOTES
Rear Door : 6 1/2"Midrange
OPTIONS
PREMIUM SYSTEMNAVIGATION
AMPLIFIER LOCATIONS:
Aftermarket Kit: SINGLE DIN
W= 5-1/2''L= 5-1/2''D= 2''
Dash Speaker: 1-1/2'' Tweeter
-
HONDA2005 ODYSSEY
Images
Front Speaker
Rear
Tweet
1. Using small pick remove panel located behind door release handle cup. Extract two Phillips head screws.2. Remove interior side mirror trim panel.3. Remove one Phillips head screw below arm rest in pocket4. Remove Plastic trim housing around door lock and window controls. Remove one Phillips head screw.5. Using panel removal tool carefully remove door panel.
1. Using panel removal tool carefully remove plastic speaker grill panel.2. Remove (3) phillips head screws and disconnect speaker harness, then remove.
Radio removal
Front Speaker
Rear Speaker
1. Using panel removal tool carefully remove the panel surround the AC controls and vents.2. Remove two Phillips head screws located bellow radio.3. Remove Phillips head screw under the rear center portion of the radio. 4. Remove radio from dash disconnect wire harness and antenna connection.
1. Using Panel removal tool carefully remove plastic pod surrounding and tweeter.2. Disconnect speaker harness and remove.
Tweeter Removal