JULY LIGHTING 1

10 lighting 2 Work Lights 5 Lamps & Mounting Accessories 5 LED Lamps & Mounting Accessories 9 Work Lamps 10 Incandescent Lamps

12 Bulbs

20172 NEW! WURTH.CA

RECHARGEABLE METAL LED LAMP

Art. No. 827.805300

Rechargeable metal torch of extremely light-weight aircraft aluminum with adjustable focusing options.

Features:• With CREE P4 1-watt high perform-

ance LED• One-hand sliding carriage focusing

mechanism• Lithium battery pack, 2200 MAH,

3.7V• Charging with 110 V power supply

unit or 12-24 V DC adaptor• Microcontroller-controlled charging

technology• Charging time for fully drained

battery is approx. 4 h• Lighting duration of up to 12 h

(lamp brightness does not begin to slowly decrease until after approx. 4 h)

• Protection against water and dust, IP X6

• Overcharging protection• Multifunction of light:

High-light → Low- light → Flash → SOS

• Dimension: 35mm × 157mm• Weight: about 200 g

Delivery scope:• 1 × battery pack, 1 × user manual• 1 × metal torch with 1-watt

high-performance LED• 1 × 12-24 V DC vehicle adaptor

and 1 × 110 V charger• 1 × charging socket cover• 1 × pouch for metal torch

Recommended tools: Replacement battery Art. No. 827.805301

Technical Information

Item Description

LED light LED CREE 1W

Luminous level 135 lumen (@700mA)

Battery Lithium ion 19670

Battery charge duration 4 hrs; afterwards, the luminance level decreases to 10% in the "Power Light" mode

Electric protection IP X6, according to IEC 60529, Section 14.2.6

Dimensions 35mm x 150mm (lamp head in) 157mm (lamp head out)

Weight 156g (without battery)

Accessories Lithium ion battery 19670, car charger, mains charger, hand strap

LED WORKLIGHT

Features:• Rechargeable LED work light.• Bi-directional lighting: 5 LED "spotlight"

area on end, 21 LED lights on face (cannot be on simultaneously).

• Adjustable 180° lamp head. • Two retractable 360° swivelling suspension hooks. • Three strong built-in magnets (Two on back,

one on bottom allows easy positioning of the light to suit your work area)

• Convenient nylon hanging strap.• Overcharge/discharge protection system:

auto power off when battery runs low. • Coloured LED indicates when battery

is fully charged (red/green).

Contents:• Rechargeable LED Work Light, AC/

DC charger, User manual

P. Qty: 1

Technical Data

Operating time (main light) Up to 8 hours

LED intensity (main light) 1000 Lux

Operating time (spotlight) Up to 15 hours

LED intensity (spotlight) 250 Lux

Battery specifications 3.7 V/2100 mAh Li-ion

Power voltage 100-240 V, 50/60 HZ

Charging time 4 hours

Dimensions (L) overall 25cm (9-3/4”)

Art. No. 827.53110

JULY LIGHTING 3

Features:• High light out-put with pen size.• Compact and one button operation.• Li-ion battery, long time operation.• Additional LED on bottom, torch function.• Strong housing, for durable use.• With clip and magnet, easy for positioning.

Contents:• Rechargeable LED Pen Light, A/C Adapter, Car charger, User manual

P. Qty: 1

Art. No. 827.500011

RECHARGEABLE LED PEN LIGHT

Technical data

Light source 7 LEDs in front, 1 LED on bottom

Li-ion battery 3.7V dc, 750 mAH

Light output 150 lux at 0.5 meters distance

Charge time 3.0 hours

Discharge time 3.0 hours for constant light out-put

Grade of protection IP 20 indoor use

Lighting angle 160°

Dimensions (L x D) 167.5mm x 23mm

Features:• COB (circuit on board) LED lighting system• Magnetic base for convenient positioning• Batteries Included• Pocket clip for easy access• Durable plastic housing with

weather resistant button

LED POCKET LIGHT

Art. No. 827.500071

Technical Data

Light source COB LED

Battery 3 AAA alkaline batteries (included)

Light out-put 150 lumens

Run time Up to 7 hours

UV LED POCKET LIGHTUV LED Lamp for Leak Detection

Features:

• COB (circuit on board) LED lighting system• Magnetic base for convenient positioning• Batteries Included• Pocket clip for easy access• Durable plastic ABS housing with weather resistant button

Benefits:

• Works with all types of UV leak detection dyes• Convenient pocket size• Compact design easily gets into tight, cramped spaces

Technical Data

Light Source 1.5W COB LED 100,000hr COB lifespan

Battery 3 AAA Alkaline batteries (included)

Light Output 440 – 450 nm UV

Run Time Up to 24 hours

EXTENDABLE U/V POCKET LIGHT

Art. No. 764.1

• High powered (395 nm peak, 400 nm dominate) true U/V LED.• Rated for over 50,000 hours of use.• Perfect for close-up inspections.• Pocket sized, extendable (5.51 ~ 7.09 inches).• Includes adjustable service mirror for those hard to see areas.

P. Qty: 1

Art. No. 827.500072

20174 NEW! WURTH.CA

WORK LIGHT WITH 40' REEL

Art. No. 828.826

• Clear lens and bumper provides maximum light protection.

• On/off switch in handle protected from dirt and moisture.

• Outer tube and magnifying lens made of tough polycarbonate.

• 40' reel with 16 GA cord.• Light produces 900 lumens. • UL and C-UL listed. • Black reel case. • Optional wall or ceiling mount.

Recommended: Replacement items for Art. No. 828.826

Retractable Safety Light Replacement Lens & BallastArt. No. 827.9639 P. Qty: 1

Replacement Lens Kit Art. No. 827.2000 P. Qty: 1

Replacement Bulb Art. No. 720.3009 P. Qty: 1

Art. No. 827.940351

New Circuit On Board (COB) Technology Lighting

Features:• Exclusive Würth design• 2 component housing with rubber grip• Strong magnet base• Adjustable angle• Front high power LED spot light• Double hooks for hanging convenience• Strong belt clip for ease of use and mobility• Wrist strap

Benefits:• Extremely high output and intensity • Very wide lighting angle• Better visibility and coverage• Torch function• Longer-lasting rechargeable battery• Convenient and easy to use

WÜRTH ERGOLIGHT PRO

Rechargeable battery

Technical Data

Main lightLuminous flux 350 lumens

Light intensity @ 0.5 meter 500 lux

Spot light Light intensity @ 0.5 meter 1300 lux

Power Source/Mains line 3.7V, 2100 mAh

Illumination Angle 90°

Charging time approx. 4.5 hrs

Discharging time approx. 3 hrs

Grade of protection IP65

Torch function Double hooks Strong magnet base Very wide lighting angle(pictured right)

JULY LIGHTING 5

LED LAMPS

LED Colour Lens Colour # of Diodes Dimensions L x W x H Mounting Clearance Function Voltage Amp Draw SAE Art. No. Qty.

Amber Amber10 6-1/2 x 2-1/4 x 1-1/8"

1-7/8" Depth

Signal/ Park

12 V

30 mA - 210 mA I6P 812.420232

1

Red Red Stop/ Turn/ Tail 20 mA - 110 mA S2T2I6 812.420231

Clear Clear Back-up 18 mA R2 812.420233

Amber Amber24 6 1/2 x 2 1/4 x 1"

Turn/ Tail/ Park 10 mA - 160 mA IP 812.120228

Red Red Stop/ Turn/ Tail/ Park 10 mA - 200 mA STIP 812.120229

Clear Clear Back-up 90 mA R2 812.420234

Red

Clear

10 6-1/2 x 2-1/4 x 1-1/8” Stop/ Turn/ Tail 20 mA - 110 mA S2T2I6 812.461040

Amber 24 6 1/2 x 2 1/4 x 1"Turn/ Tail/ Park 10 mA - 160 mA IP 812.461031

Red Stop/ Turn/ Tail/ Park 10 mA - 170 mA STIP 812.461030

Advantages of LED Technology

• Long service life, as maintenance-free • No bulb change necessary • Very low power consumption• Hermetically sealed • Resists road dirt, dust and moisture • Solid state circuit boards • LEDs provide 100,000 hour lifetime rating • Meets or exceeds DOT FMVSS

108 & MOT CMVSS108• Will fit Grote grommets

Oval LED lamps• Polycarbonate body and lens • Zinc plated steel contacts • Epoxy encapsulated circuit board

Grommets: 812.420244 open back or 812.420245 closed back

Pigtails: 812.420251 & 812.420250 right angle plug

LED LAMPSRound LED Lamps

• Polycarbonate body and lens • Zinc plated steel contacts • Epoxy coated circuit board

LED Colour Lens Colour # of Diodes Dimensions Mounting Clearance Function Voltage Amp Draw SAE Art. No Qty.

Amber Amber

10 4-1/4" ø7/8" H 1-7/8" Depth

Signal/ Park

12 V

36 mA/290 mA I6P 812.420225

1

Red Red Stop/ Turn/ Tail 22 mA/147 mA S2T2I6 812.420226

Clear Clear Back-up 0.29 R2 812.420227

Amber Amber

24 4-1/4" ø1" H 1-3/8" Depth

Signal/ Park 23 mA /400 mA IP 812.420223

Red Red Stop/ Turn/ Tail 18 mA/272 mA STI 812.420224

Clear Clear Back-up 0.23 AMP IP 812.420220

RedClear

10 4-1/4” x 7/8” H 1-7/8” Depth Stop/ Turn/ Tail 19 mA/ 201 mA S2T2I6 812.461021

Red 24 4-1/4" x 1" H 1-3/8" Depth Stop/ Turn/ Tail 18 mA/212 mA STI 812.461011

Grommets: 812.420246 open back or 812.420247 closed back

Pigtails: 812.420251 straight plug or 812.420250 right angle plug

20176 NEW! WURTH.CA

LED LAMPS WITH SILVER SURFACE MOUNT

LED Colour # of Diodes Dimensions L x W x H Mounting Hole Size Mounting Centre Function Voltage Amp Draw SAE Art. No. Qty.

Amber with Chrome Bezel 107-9/16" x 3-5/16" x 7/8" 3/16"

6-11/16" Signal/Park12V

26 mA / 217 mA 16P 812.4610511

Red with Chrome Bezel 2-11/16" Stop/Turn/Tail 29 mA/ 119 mA S2T2I6 812.461050

Advantages of LED Technology

• Long service life, as maintenance-free • No bulb change necessary • Very low power consumption• Hermetically sealed • Resists road dirt, dust and moisture • Solid state circuit boards • LEDs provide 100,000 hour lifetime rating • Meets or exceeds DOT FMVSS 108 • Will fit Grote grommets

Oval LED lamps

• Polycarbonate body and lens • Zinc plated steel contacts • Epoxy encapsulated circuit board

Surface mount installation eliminates the need to cut mounting hole and does not require grommets & pigtails.

ROUND LED CLEARANCE MARKER LAMPS

SEALED LAMPS WITH DECORATIVE CHROME BEZELS

• Polycarbonate body and lens • Zinc plated steel contacts • Epoxy encapsulated circuit board * Epoxy coated circuit board

LED Colour # of Diodes Dimensions Function Voltage Amp Draw SAE Art. No. Qty.

Amber4

2" ø 1" H

Clearance Marker 12 V

92.6 mA

P2

812.420208*

1

Red 90.7 mA 812.420207*

Amber10 Star Pattern

90.7 mA 812.420206

Red 90.7 mA 812.420205

Amber with clear lens10

90.7 mA 812.420195

Red with clear lens 90.7 mA 812.420198

Amber4

2-1/2" ø1" H

87.3 mA 812.420204*

Red 89.5 mA 812.420203*

Amber13 Star Pattern

107.7 mA 812.420202

Red 107.7 mA 812.420201

Red with clear lens 13 107.7 mA 812.420197

• LED lamps with chrome on ABS bezels and 2 wires • Surface mount installation without grommet & pigtails • Hard wired contacts • Polycarbonate lens and body • Epoxy coated circuit board

LED Colour # of Diodes Dimensions L x W x H Mounting Function Voltage Amp Draw SAE Art. No. Qty.

Amber6 6-5/8 x 2-1/8 x 7/8" 4" centre Clearance

marker 12 V89.6 mA

P2812.420222

1Red 88.5 mA 812.420221

JULY LIGHTING 7

LED CLEARANCE MARKER LAMPS - REFLECTIVE• Contacts: Zinc plated steel • Epoxy encapsulated circuit board • Polycarbonate lens & body

Colour # of Diodes Dimensions Function Voltage Amp Draw SAE Art. No. Qty.Amber

4 2-1/2" ø 3/4" depth Clearance marker/ reflector 12 V

107.7 mAAP2

812.4202521

Red 63.2 mA 812.420253

LED MARKER LAMPS4 Diode Series

• Come with base mount, hotwire and built-in ground.

• Quick installation without pigtail. • Polycarbonate lens and body.• Epoxy encapsulated circuit board. • Zinc plated steel contacts. • 12V applications.

Dimensions (LxWxH) Colour Super Flux diodes Function Amp draw SAE Art. No. Qty.

4" x 1-1/2" x 7/8"Red

4 Clearance marker 0.07 Amp P2PC812.420717

1Amber 812.420866

* Alternatives to 12-diode marker lamps 812.420254 and 812.42055.

SEALED LAMPS• Base mount, hotwire and built-in ground • Quick installation without pigtail • Base mount: ABS • Contacts: Zinc plated steel • Polycarbonate lens & body • Epoxy coated circuit board

Colour # of Diodes DimensionsL x W x H Function Voltage Amp Draw SAE Art. No. Qty.

Amber12 3-7/8 x 1-1/4 x 7/8" Clearance marker 12 V

153.8 mAP2

812.4202541

Red 156 mA 812.420255

LED LICENSE LAMP• Lens: PMMA • Body: ABS • Contacts: Hard wired • Circuit board: epoxy coated

Colour # of Diodes Dimensions Mounting Function Voltage Amp Draw SAE Art. No. Qty.

White 12 4 x 1 7/8 x 2 1/8" 2" centre License 12 V 165.9 mA L 812.420210 1

20178 NEW! WURTH.CA

MID-TURN SIGNAL LAMP• Contacts: Zinc plated steel • Circuit board: epoxy coated • Polycarbonate lens & body

Colour # of Diodes Dimensions L x W x D Mounting Clearance Function Voltage Amp Draw SAE Art. No. Qty.

Amber 9 6 1/2 x 2 1/2 x 2 3/4" 2 3/4" depth Mid-turn reflector, Clearance marker 12 V 87 mA / 157 mA AE2P2 812.420230 1

MOUNTING ACCESSORIESContact Pigtails

• Zinc plated copper contacts

PVC Grommets

Description Style Length Wire Gauge End Art. No. Qty.Right PVC Angle Plug

Double Contact Pigtail 9"16 GA 1 #10 Ring Terminal

812.42025010Straight PVC Plug 812.420251

Right PVC Angle Plug Single Contact Pigtail 6" 812.420249

Style For lamp size Type Dimensions Sugg. Hole. Dim. Art. No. Qty.

Round

4"Open back

5 1/4" ø 4 1/2" ø812.420246

10

Closed back 812.420247

2.5"Open back

3 3/8" ø 2 25/32" ø812.420240

Closed back 812.420241

2"Open back

2 7/8" ø 2 5/16" ø812.420242

Closed back 812.420243

Oval N/AOpen back

7 3/8 L x 3 1/8" W 6 1/2 L x 2 1/2" W812.420244

Closed back 812.420245

JULY LIGHTING 9

RUBBER-LIKE WORK LAMPSSealed beam with housing work lamp

• Work lamp housing made from high-impact synthetic rubber-like resin. • These have the feel and shock absorbing characteristics of rubber but are UV resistant (colour will not fade

or crack) and stand up to road contaminants that deteriorate rubber lamp housings. • Mounting hardware is steel with zinc plating. • 12V application.

Dia. Dimensions (height x depth) Mounting stud size Function Light Pattern Watts Candlepower Art. No. Qty.

5" 5-7/8" H x 3" D 5/16" Off-road work lamp Trap/Work* 35 3000 812.450201 1

Double halogen bulb work lamp

• Work lamp housings are made from rugged high-impact nylon housing.• Twin replaceable halogen high output bulbs (H3). • Operates with one or two bulbs lit.• Bracket is powder-coated steel with adjustable mounting hardware. • 12V applications.

Recommended:Replacement Bulb Art. No. 721.64151P.Qty: 2

Dimensions (LxWxH) Mounting stud size Function Light Pattern Watts Art. No. Qty.

6-1/4" x 4-3/4" x 4-1/8" 10 mm Off-road work lamp Flood 110 (2 @ 55 W ea.) 812.450200 1

HALOGEN WORK LAMP

* In a trap/work design, light is dispersed in a trapezoidal shape, unlike a spotlight

LED WORK LAMPWork lamp with high output LEDs

• High light output with 8 high output LED diodes.• Low amp draw. • Emits clear white light, with an optimum working distance up to 300 ft. • Stylish compact aluminum housing with black powder coating, polycarbonate lens and stainless steel

adjustable mounting hardware.• Epoxy encapsulated circuit board.• 9V–36V applications. • 840 Lumens/5600 CP

Dimensions (LxWxH) Mounting stud size Function High output diodes Amp draw Art. No. Qty.

4-3/8" x 4-7/8" x 1-7/8" 5/16" Off-road work lamp 8 0.8 Amp 812.450400 1

201710 NEW! WURTH.CA

Round sealed lamps

• Polycarbonate lens and body.• Hermetically sealed to resist road dirt, dust and moisture. • Zinc plated steel contacts. • Contacts are compatible with industry standard pigtails. • Meets all DOT FMVSS108 & MOT CMVSS108 safety standards. • 12V applications.

Description Dimensions (Dia. x H) Colour Function Amp draw SAE Grommet Pigtail Art. No. Qty.

Round sealed2" x 3/4"

Amber Clearance marker 0.35 Amp P2 •• • 812.420862

1

Round sealed Red Clearance marker 0.35 Amp P2 •• • 812.420714

Round sealed

2-1/2" x 3/4"

Amber Clearance marker 0.35 Amp P2 •• • 812.420863

Round sealed Red Clearance marker 0.35 Amp P2 •• • 812.420715

Round sealed with reflective lens Amber Clearance marker/reflector 0.35 Amp AP2 •• • 812.420861

Round sealed with reflective lens Red Clearance marker/reflector 0.35 Amp AP2 •• • 812.420713

Round sealed, shock mounted

4-1/4" x 2"

Amber Signal/park 0.6-2.5 Amps IP •• •• 812.420710

Round sealed, shock mounted Red Stop/turn/tail/park 0.6-2.5 Amps STIP •• •• 812.420711

Round sealed with reflective lens Red Stop/turn/tail/rear reflector/clearance

marker 0.6/2.5 Amps AIP2ST •• •• 812.420865

Round back up lamp White Back-up 2.2 Amps R •• •• 812.420660

•••• Refer to legend below

•••• Refer to legend below

INCANDESCENT SEALED LAMPS

Oval sealed lamps

• Polycarbonate lens and body.• Hermetically sealed to resist road dirt, dust and moisture. • Zinc plated steel contacts. • Meets all DOT FMVSS108 & MOT CMVSS108 safety standards. • 12V applications.

Dimensions (LxWxH) Colour Function Amp draw SAE Grommet Pigtail Art. No. Qty.

6-1/2" x 2-1/4" x 2-3/8"

Amber Signal/park 0.6/2.5 Amps STIPP2 •• •• 812.420860

1Red Stop/turn/tail/park 0.6/2.5 Amps STIPP2 •• •• 812.420712

White Back up 2.22 Amps R •• •• 812.420650

Accessories Guide

Grommets

Style Lamp Size Type Art. No. Colour Code

Round

2" Open back 812.420242 •2" Closed back 812.420243 •2.5" Open back 812.420240 •2.5" Closed back 812.420241 •4" Open back 812.420246 •4" Closed back 812.420247 •

OvalOpen back 812.420244 •Closed back 812.420245 •

Pigtails

Description Style Art. No. Colour code

Right angle plug Double contact 812.420250 •Straight plug Double contact 812.420251 •Right angle plug Single contact 812.42049 •

JULY LIGHTING 11

Dimensions (LxWxH) Colour Function Amp draw SAE Art. No. Qty.

4" x 1-1/4" x 7/8" Amber Clearance marker 0.7 Amp P2PC 812.4208641

4" x 1-1/4" x 7/8" Red Clearance marker 0.7 Amp P2PC 812.420716

INCANDESCENT LICENSE LAMPSIn polycarbonate housing

• License lamp kit with sealed lamp and pigtail. • Polycarbonate lens and body (gray). • Zinc plated steel contacts. • Pigtail: Right PVS angle plus with 16 GA wire.• Mounting: 2" centre.• 12V applications.

Dimensions (LxWxH) Function Amp draw SAE Art. No. Qty.

3-1/2" x 2-1/2" x 2-1/4" License 0.35 Amp L 812.420610 1

Chrome plated steel housing

• Mounting: 2" centre.• 12V applications.

Dimensions (LxWxH) Function Amp draw SAE Art. No. P. Qty. Replacement bulb Qty.

2-3/4" x 1-1/2" x 2" License 0.6 Amp L 812.420611 1 Art. No. 721.670100 10

INCANDESCENT BULLSEYE MARKER LAMPS

In polycarbonate housing

• High impact molded bodies with replaceable snap-on lens. • Meet all FMVSS108 DOT and MOT CMVSS108 safety standards. • White ABS body.• Acrylic lens.• Mounting: 3" centre. • 12V applications.

Dimensions(LxWxH) Colour Function Amp draw SAE Art. No. Qty. Replacement lens Qty. Replacement bulb Qty.

4" x 2" x 1" Amber Clearance marker 0.7 Amp P3 812.420869 1 1 721.194000 10

4" x 2" x 1" Red Clearance marker 0.7 Amp P3 812.420720 1 812.420721 1 721.194000 10

INCANDESCENT SEALED LAMPS1" x 4" Sealed lamps

• Come with base mount, hotwire and built-in ground.

• Quick installation without pigtail. • Polycarbonate lens and body.• Hermetically sealed to resist road dirt, dust and

moisture. • Zinc plated steel contacts. • Meets all DOT FMVSS108 & MOT CMVSS108

safety standards. • 12V applications.

201712 NEW! WURTH.CA

COMING SOON!

WÜRTH LIGHT BULB EXPANSION!

F A L L 2 017

JULY LIGHTING 13

24 VOLT WURTH BULBS- PREFIX 720

3009 (12V)

1342 1312 1322 1412 1402 1502 15021 1552 1512 14021

1622 1612 1602 1732 1722 1662 1107 1112

201714 WURTHCANADA.COM

24 VOLT WURTH BULBS- PREFIX 720

EUROPEAN/ASIAN LIGHT BULBS - PREFIX 721

64215

2721 2722 2821 2825 3893 5008 6713 6418

64156 64193 6475 7506 7951

Art. No. 965.721

Bulb Start-Up AssortmentContents (84 Pieces):Assortment of Prefix 721 bulbs

ASSORTMENTS