zync z919 os installation guide
TRANSCRIPT
Zync Z919 OS Installation Guide
Before starting the installation
• Download the file required.
• Fully charge the Tablet.
• Turn off the Tablet.
• Connect the Tablet to your PC using the USB data cable.
Steps to install the Tablet OS
• Extract the downloaded Zip file, Zync-Z919-OS-ICS (If required, refer “How to Extract a Zip
File - Guide”).
• The folders 'logo_DIY' and 'SDPackTool' will be extracted.
• Open the 'SDPackTool' folder.
• Run Vortexflash.exe file.
• Press & hold the Reset button of the Tablet for 5 to 6 seconds.
• Now press the Tablet Power & Menu buttons both together tp open up the following
window on the PC screen.
• Minimize the AutoPlay window to view the Installer.
• Now select the first option in the installation setup as highlighted in the following screenshot,
'Flash Tool V1.'4'
• Please select the particular option on the right as marked in the following screenshot.
• A new window will open up, please click on the 'OK' button.
Installing…
• After completion, the following window opens up, click the 'OK' button to end the process.
• Press the Reset button on the Tablet & then turn on the Tablet using the Power button.
• The installation is completed & the Tablet is now ready to use.
• The Tab may take 5 to 6 minutes to start up.