Zync Z919 OS Installation Guide

Before starting the installation

• Download the file required.

• Fully charge the Tablet.

• Turn off the Tablet.

• Connect the Tablet to your PC using the USB data cable.

Steps to install the Tablet OS

• Extract the downloaded Zip file, Zync-Z919-OS-ICS (If required, refer “How to Extract a Zip

File - Guide”).

• The folders 'logo_DIY' and 'SDPackTool' will be extracted.

• Open the 'SDPackTool' folder.

• Run Vortexflash.exe file.

• Press & hold the Reset button of the Tablet for 5 to 6 seconds.

• Now press the Tablet Power & Menu buttons both together tp open up the following

window on the PC screen.

• Minimize the AutoPlay window to view the Installer.

• Now select the first option in the installation setup as highlighted in the following screenshot,

'Flash Tool V1.'4'

• Please select the particular option on the right as marked in the following screenshot.

• A new window will open up, please click on the 'OK' button.

Installing…

• After completion, the following window opens up, click the 'OK' button to end the process.

• Press the Reset button on the Tablet & then turn on the Tablet using the Power button.

• The installation is completed & the Tablet is now ready to use.

• The Tab may take 5 to 6 minutes to start up.