z_text_references.pdf

8/10/2019 Z_Text_References.pdf

1/11

Text References

1-1 Composite Material Study: Maturity of Technology Materials and Fabrication, F.I.T.

Structural Composites Laboratory technical report prepared for UNISYS Corporation and

U.S. Navy, March 1988, Distribution Limited.

1-2 Composite Tandem Wing Boosts Hydroplane Stability, Advanced Composites,Advanstar Communications, Sep/Oct 1992, pp. 15-16.

1-3 Guide for Building and Classing Offshore Racing Yachts, American Bureau of Shipping,

1986, Paramus, New Jersey.

1-4 Fisher, Karen, Composites Find New Waters at Americas Cup, Advanced Composites,

Advanstar Communications, May/Jun 1992, pp. 47-49.

1-5 Hamilton, J.G. and Patterson, J.M., Structural Design and Analysis of an Americas

Cup Yacht, SAMPE Journal, Covina, CA, Vol. 28, No. 6, Nov/Dec 1992., pp. 9-13.

1-6 Antrim, J. K., The New Americas Cup Rule - A Search for the Performance Edge,

Marine Technology, SNAME, Jersey City, NJ, Vol. 31, No. 3, July 1994, pp. 168-174.

1-7 personal correspondence with Tom Johannsen of ATC Chemical Corporation, June 5,

1996.

1-8 Pittman, L.L. Breaking the Old Moulds, Jan. 1985, P. 76-81, in Engineered Materials

Handbook, Vol. 1, Composites, ASM International, 1987.

1-9 Summerscales, John. Royal Naval Engineering College, Marine Applications, in

Engineered Materials Handbook, Vol. 1, Composites, ASM International, 1987.

1-10 Hellbratt, S. and Gullberg, O, invited paper: The High Speed Passenger FerrySES Jet

Rider, Second International Conference on Marine Applications of Composite Materials,

March 1988, Karlskronavarvet AB, Karlskrona, Sweden.

1-11 Scott, R.J. and Sommelia, J., Gibbs and Cox, Inc., Feasibility Study of Glass Reinforced

Plastic Cargo Ship, SSC-224, Ship Structure Committee, 1971, 135p.

1-12 Horsmon, A.W., Composites for Large Ships, 1993 NSRP Ship Production

Symposium, Nov 1-4, 1993, SNAME, Williamsburg, VA.

1-13 Italcraft M78. Boat Int. No. 7, 1985, p. 91, in Engineered Materials Handbook, Vol. 1,

Composites, ASM International, 1987.

1-14 Extensive Use of GRP for Tomorrow's Undersea Craft. Reinforced Plastics, Vol. 27,

No. 9 (Sept. 1983), p. 276, in Engineered Materials Handbook, Vol. 1, Composites, ASM

International 1987.

1-15 Composite Hull Increases Submarine's Range of Action. Composites, Vol. 14, No. 3(July 1983) p. 314, in Engineered Materials Handhook, Vol. 1, Composites, ASM

International, 1987.

1-16 Pipes, R.B., Chairman, Use of Composite Materials in Load-Bearing Structures, National

Conference, sponsored by the Ship Structure Committee, convened by the Marine Board,

Arlington, VA, Sep 25-26, 1990, National Academy Press.

340

Text References Marine Composites


2/11

1-17 Market Development, CI on Composites, SPI Composites Institute, New York, NY,

Aug/Sep 1994, pp. 10-11.

1-18 Seapiletm

Composite Marine Piling, FRP International, Rizkalla, S.H. Editor,

University of Manitoba, Winter, 1995, Vol. III, Issue 1, p. 6.

1-19 Brunetta, L., Covering the Waterfront with Recycled Milk Jugs, Technology Review,

MIT, Cambridge, MA, Vol. 98, No. 3, April, 1995, pp. 55-56.

1-20 C-Bar Reinforcing Rods, FRP International, Rizkalla, S.H. Editor, University of

Manitoba, Winter, 1995, Vol. III, Issue 1, pp. 5-6.

1-21 Warren, G.E., Malvar, L.J., Inaba, C., Hoy, D. and Mack, K., Navy Advanced

Waterfront Technology, International Conference on Corrosion and Corrosion Protection

of Steel in Concrete, Structural Integrity Research Institute, University of Sheffield,

England, July 24-29, 1994.

1-22 Odello, R.J., Naval Facilities Engineering Service Center, Port Hueneme, CA report to

SPI January 12, 1995 at Philadelphia, PA.

1-23 Fifth International Ship Structure Congress, 1973 section on Glass Reinforced Plastics.

1-24 Espeut, D.O., Breaking the Glass Barrier: Overcoming Manufacturers Resistance to

Fiberglass in the Commercial Shipbuilding Industry, 38th Annual Conference, Session

17-A, Reinforced Plastics/Composites Institute, the Society of the Plastics Industry, Inc.

Feb 7-11, 1983.

1-25 Heller, S.R. Jr. "The Use of Composite Materials In Naval Ships." Mechanics of

Composite Materials, Proceedings of the Fifth Symposium on Structural Mechanics, 8-10

May, 1967, Phil., PA.

1-26 Landford, Benj in W. Jr. and J. Angerer. "Glass Reinforced Plastic Developments for

Application to Minesweeper Construction." Naval Engineers Journal, (Oct. 197 1) p.

13-26.

1-27 Kelly, J., Thick Composites Fabrication and Embedded Sensor Systems Program,

Applying Composites in the Marine Environment, sponsored by the American Society of

Naval Engineers, Savannah, GA, Nov 8-10, 1993.

1-28 Capability brochure published by the the U.S. Navy NSWC, Carderock, August, 1982.

1-29 High Impact Resistant (Toughened) Glass Epoxy Material Systems for Glass

Reinforced (GRP) Domes, prepared by HITCO Fabricated Composites Division under

contract N0024-82-C-4269, June 1986.

1-30 Caplan, I.L., Marine Composites - The U.S. Navy Experience,Lessons Learned Along

the Way, First International Workshop on Composite Materials for Offshore Operations,University of Houston, Oct 26-28, 1993.

1-31 Baker III, A.D., editor, The Naval Institute Guide to Combat Fleets of the World 1995,

Naval Institute Press, Annapolis, MD, 1995.

1-32 Hepburn, R.D., The U.S. Navys New Coastal Minehunter (MHC): Design, Material,

and Construction Facilities, Naval Engineers Journal, the American Society of Naval

Engineers, May, 1991.

341

Chapter Six REFERENCE


3/11

1-33 Eccles, B., Briefing on Intermarine USA Facility and Ship Tour, Applying Composites

in the Marine Environment, sponsored by the American Society of Naval Engineers,

Savannah, GA, Nov 8-10, 1993.

1-34 Olsson, Karl-Axel. "GRP Sandwich Design and Production in Sweden Development and

Evaluation." The Royal Institute of Technology, Stockholm, Sweden, Report 86-6, 1986.

1-35 Hall, D.J. and Robson, B.L., A review of the design and material evaluation programme

for the GRP/foam sandwich composite hull of the RAN minehunter, Composites,

Butterworth & Co., Vol. 15, No. 4, Oct. 1984.

1-36 Nguyen, L., Kuo, J.C., Critchfield, M.O. and Offutt, J.D., Design and Fabrication of a

High Quality GRP Advanced Materiel Transporter, Small Boats Symposium 93,

Norfolk, VA, the American Society of Naval Engineers, May 26-27, 1993.

1-37 Critchfield, M.O., Morgan, S.L. and Potter, P.C., GRP Deckhouse Development for

Naval Ships, Advances in Marine Structures, Elsevier Applied Science, pps. 372-391,

1991.

1-38 Le Lan, J.Y., Livory, P. and Parneix, P., DCN Lorient - France, Steel/CompositeBonding Principle Used in the Connection of Composite Superstructures to a Metal

Hull, Nautical Construction with Composite Materials, Paris, France, 1992.

1-39 Fishman, N. Structural Composites: a 1995 Outlook. Modern Plastics, July 1989, p.

72-73.

1-40 Margolis, J.M. "Advanced Tberrnoset Composites Industrial and Commercial

Applications." Van Nostrand Reinhold Company, N.Y., 1986.

1-41 McDermott, J., SMC: A Third Generation, Composites Technology, Ray Publishing,

May/June 1995, pps. 20-27.

1-42 Koster, J., MOBIK GmbH, Gerlingen, West Germany. The Composite Intensive

Vehicle - A Third Generation of Automobiles! A Bio-Cybemetical Approach toAutomotive Engineering? May, 1989.

1-43 McConnell, V.P., Crossmember Proves Volume-Efficient in Ford Pilot Program,

Composites Technology, Ray Publishing, Sep/Oct 1995, pps. 48-50.

1-44 Engineers' Guide to Composite Materials, American Society for Metals, 1987,

Abstracted from Composite Driveshafts - Dream or Reality. Sidwell, D.R., Fisk, M.

and Oeser, D., Merlin Technologies, Inc., Campbell, CA. New Composite Materials and

Technology, The American Institute of Chemical Engineers, p. 8-11, 1982.

1-45 Engineers' Guide to Composite Materials, American Society for Metals, 1987,

Abstracted from A Composite Rear Floor Pan,Chavka, N.G. and Johnson, C.F., Ford

Motor Co. Proceedings of the 40th Annual Conference, Reinforced Plastics/CompositesInstitute, 28 Jan.-1 Feb. 1985, Session 14-D. the Society of the Plastics Industry, Inc., p.

1-6.

1-46 Modern Plastics, April 1989, Plastiscope feature article.

1-47 Modern Plastics. September 1989, various articles.

1-48 Reinforced Plastics for Commercial Composites, American Society for Metals Source

Book, 1986.

342



4/11

1-49 Dickason, Richard T., Ford Motor Company, Redford, MI. HSMC Radiator Support.

Reinforced Plastics for Commercial Composites, American Society for Metals: Metals

Park, OH, 1986.

1-50 Johnson, C. F., et al. Ford Motor Company, Dearborn, MI and Babbington, D. A., Dow

Chemical Company, Freeport, TX. Design and Fabrication of a HSRTM Crossmember

Module. Advanced Composites III Expanding the Technology, Proceedings, ThirdAnnual Conference on Advanced Composites, 15-17 September 1987, Detroit, MI.

1-51 Materials Substitution in Automotive Exterior Panels (1989-1994). Philip Townsend

Associates, Inc., Marblehead, MA.

1-52 Spencer, R.D., Riding in Style, Fabrication News, Composites Fabricators Association,

Arlington, VA, Vol 7 No. 3 March 1993.

1-53 Farris, Robert D., Shell Development Center, Houston, TX. "Composite Front

Crossmember for the Chrysler T-1 15 Mini-Van." Advanced Composites III Expanding

the Technology, Proceedings, Third Annual Conference on Advanced Composites, 15-17

September 1987, Detroit, MI.

1-54 Engineers' Guide to Composite Materials, American Society for Metals, 1987.

Abstracted from Design and Development of Composite Elliptic Springs for Automotive

Suspensions. Mallick, P.D., University of Michigan, Dearbom, Dearborn, MI.

Proceedings of the 40th Annual Conference, Reinforced Plastics/Composites Institute, 28

Jan.- 1 Feb. 1985, Session 14-C, The Society of the Plastics Industry, Inc., p. 1-5.


Abstracted from Composite Leaf Springs in Heavy Truck Applications. Daugherty,

L.R., Exxon Enterprises, Greer, SC. Composite Materials: Mechanics, Mechanical

Properties, and Fabrication. Proceedings of Japan-U.S. Conference, 1981, Tokyo, Japan:

The Japan Society for Composite Materials, p. 529-538, 1981.


Abstracted from Composite Truck Frame Rails, May, G.L., GM Truck and Coach

Division, and Tanner, C., Convair Division of General Dynamics. Automotive

Engineering, p. 77-79, Nov. 1979.

1-57 Sea, M.R., Kutz, J. and Corriveau, G., Vehicle Research Institute, Western Washington

University, Bellingham, WA. Development of an Advanced Composite Monocoque

Chassis for a Limited Production Sports Car. Advanced Composites: The Latest

Developments, Proceedings of the Second Conference on Advanced Composites, 18-20

Nov. 1986, Dearborn, MI, 1986.

1-58 McConnell, V.P., Electric Avenue, High-Performance Composites, Ray Publishing,

July/Aug 1995.

1-59 adapted from a talk by Richard Piellisch, Advanced Materials in Alternative Fuel

Vehicles, SAMPE Journal, SAMPE, Covina, CA Vol 31, No. 5, Sep/Oct 1995, pps.

9-11.

1-60 Composites Ride the Rails, Advanced Composites, Advanstar Communications, Vol 8,

No. 2, Mar/Apr 1993.

343



5/11

1-61 Shook, G.D. Reinforced Plastics for Commercial Composites, Metals Park, OH:

American Society for Metals, 1986.

1-62 Fisher, K., Inside Manufacturing: Pultrusion plant rolls out marine containers,

High-Performance Composites, Ray Publishing, Vol 3, No. 5 Sep/Oct 1995.

1-63 Lindsay, K., All-composite boxcar rejuvenates rail fleet, Composites Design &

Application, Composites Institute of the Society of the Plastics Industry, Fall, 1995.

1-64 Modern Plastics, July 1989, feature article by A. Stuart Wood.

1-65 McConnell, V.P., Industrial Applications, Advanced Composites, Advanstar

Publications, Vol 7, No. 2, Mar/Apr 1992.

1-66 GRP Wraps Up Bridge Repairs, Reinforced Plastics, Elsevier Science Ltd., Vol 39, No.

7/8, Jul/Aug 1995, pps 30-32.

2-1 Engineers' Guide to Composite Materials, Metals Park, OH; American Society for

Metals, 1987 ed.

2-2 Feichtinger, K.A.Methods of Evaluation and Performance of Structural Core Materials

Used in Sandwich Construction, Proc. of the 42nd Annual Conference SPI Reinforced

Plastics/Composites Institute. 2-6 Feb., 1987.

2-3 Johannsen, Thomas J., One-Off Airex Fiberglass Sandwich Construction, Buffalo, NY:

Chemacryl, Inc., 1973.

2-4 Hexcel, HRH-78 Nomex

Commercial Grade Honeycomb Data Sheet 4400. Dublin,

CA., 1989.

3-1 Principles of Naval Architecture, by the Society of Naval Architects and Marine

Engineers. New York, 1967.

3-2 Engineers' Guide to Composite Materials, Metals Park, OH; American Society for

Metals, 1987 ed.3-3 Evans, J. Harvey, Ship Structural Design Concepts, Cambridge, MD; Cornell Maritime

Press, 1975.

3-4 Noonan, Edward F., Ship Vibration Guide, Washington, DC; Ship Structure Committee,

1989.

3-5 Schlick, O., Further Investigations of Vibration of Steamers, R.I.N.A., 1894.

3-6 Guide for Building and Classing Offshore Racing Yachts, by the American Bureau of

Shipping, Paramus, NJ, 1986.

3-7 Guide for Building and Classing High-Speed and Displacement Motor Yachts, by the

American Bureau of Shipping, Paramus, NJ, 1990.3-8 Heller, S.R. and Jasper, N.H., On the Structural Design of Planing Craft, Transactions,

Royal Institution of Naval Architects, (1960) p 49-65.

3-9 NAVSEAHigh Performance MarineCraft Design Manual Hull Structures,

NAVSEACOMBATSYSENGSTA Report 60-204, July 1988. Distribution limited.

3-10 DnV Rules for Classification of High Speed Light Craft, Det Norske Veritas, Hovik,

Norway, 1985

344



6/11

3-11 Schwartz, Mel M., Composite Materials Handbook, McGraw Hill, New York, 1984.

3-12 Tsai, Stephen W., Composites Design, Third edition, Tokyo, Think Composites, 1987.

3-13 X.S. Lu & X.D. Jin, Structural Design and Tests of a Trial GRP Hull, Marine

Structures, Elsever, 1990

3-14 Department of the Navy, DDS-9110-9, Strength of Glass Reinforced Plastic StructuralMembers, August, 1969, document subject to export control.

3-15 Department of the Army, Composite Material Handbook, MIL-HDBK-17, U.S. Army

Research Lab, Watertown, MA.

3-16 Department of the Army, Composite Material Handbook, MIL-HDBK-23, U.S. Army

Research Lab, Watertown, MA

3-17 Smith, C.S., Buckling Problems in the Design of Fiberglass-Reinforced Plastic Ships,

Journal of Ship Research, (Sept., 1972) p. 174-190.

3-18 Reichard, Ronnal P., FRP Sailboat Structural Design: Details Make the Difference,

Proc. of the 17th AIAA/SNAME Symposium on the Aero/Hydrodynamics of Sailing:

The Ancient Interface. Vol. 34 31 Oct. - 1 Nov. 1987.

3-19 Owens-Corning Fiberglas Corp., Joint Configuration and Surface Preparation Effect on

Bond Joint Fatigue in Marine Application, Toledo, OH, 1973.

3-20 Della Rocca, R.J. and Scott, R.J., Materials Test Program for Application of Fiberglass

Reinforced Plastics to U.S. Navy Minesweepers, 22nd Annual Technical Conference,

The Society of the Plastics Industry, Inc.

3-21 Naval Material Laboratory, New York Naval Shipyard, Design Manual for Joining of

Glass Reinforced Structural Plastics, NAVSHIPS 250-634-1, August 1961.

3-22 Horsmon, Al, Notes on Design, Construction, Inspection and Repair of Fiber Reinforced

Plastic (FRP) Vessels, USCG NVIC No. 8-87, 6 Nov. 1987.3-23 Rules for Building and Classing Reinforced Plastic Vessels, by the American Bureau of

Shipping, Paramus, NJ, 1978.

3-24 Gibbs & Cox, Inc., Marine Design Manual for Fiberglass Reinforced Plastics, sponsored

by Owens-Corning Fiberglas Corporation, McGraw-Hill, New York, 1960.

3-25 Reichard, Ronnal P., and Gasparrina, T., Structural Analysis of a Power Planing Boat,

SNAME Powerboat Symposium, Miami Beach, FL, Feb 1984.

3-26 Reichard, Ronnal P., Structural Design of Multihull Sailboats, First International

Conference on Marine Applications of Composite mateials, Melbourne, FL, Florida

Institute of Technology, March, 1986.

3-27 1988 Annual Book of ASTM Standards, Vols 8.01, 8.02, 8.03, 15.03, ASTM, 1916 Race

Street, Philadelphia, PA.

3-28 Weissmann-Berman, D., A Preliminary Design Method for Sandwich-Cored Panels,

Proceedings of the 10th Ship Technology and Research (STAR) Symposium, SNAME

SY-19, Norfolk, VA, May 1985.

345



7/11

3-29 Sponberg, Eric W., Carbon Fiber Sailboat Hulls: How to Optimize the Use of an

Expensive Material, Journal of Marine Technology, 23 (2) aPRIL, 1986.

3-30 Riley, C. and Isley, F., Application of Bias Fabric Reinforced Hull Panels, First

International Conference on Marine Applications of Composite mateials, Melbourne, FL,

Florida Institute of Technology, March, 1986.

4-1 Hashin, Z. Fatigue Failure Criteria for Unidirectional Fiber Composites. Journal of

Applied Mechanics, Vol. 38, (Dec. 1981), p. 846-852.

4-2 Kim, R.Y. Fatigue Behavior. Composite Design 1986, Section 19, S.W. Tsai, Ed.,

Think Composites: Dayton, Ohio, 1986.

4-3 Goetchius, G.M., Fatigue of Composite Materials, Advanced Composites III Expanding

the Technology, Third Annual Conference on Advanced Composites, Detroit, Michigan,

15-17 September 1987, p.289-298.

4-4 Salkind, M.J., Fatigue of Composites, Composite Materials: Testing and Design

(Second Conference), ASTM STP 497, 1972, p. 143-169.

4-5 Chang, F.H., Gordon, D.E., and Gardner, A.H., A Study of Fatigue Damage inComposites by Nondestructive Testing Techniques, Fatigue of Filamentary Composite

Materials, ASTM STP 636, K.L. Reifsnider and K.N. Lauraitis, Eds., ASTM, 1977.

4-6 Kasen, M.B., Schramm, R.E., and Read, D.T., Fatigue of Composites at Cryogenic

Temperatures. Fatigue of Filamentary Composites, ASTM STP 636, K.L. Reffsnider and

K.N. Lauraitis, Eds., American Society for Testing and Materials, 1977, p. 141-151.

4-7 Porter, T.R., Evaluation of Flawed Composite Structure Under Static and Cyclic

Loading, Fatigue of Filamentary Composite Materials, ASTM STP 636, K.L. Reifsnider

and K.N. Lauraitis, Eds., American Society for Testing and Materials, 1977, p. 152-170.

4-8 Ryder, J.T., and Walker, E.K., Effects of Compression on Fatigue Properties of a

Quasi-Isotropic Graphite/Epoxy Composite, Fatigue of Filamentary CompositeMaterials, ASTM STP 636, K.L. Reifsnider and K.N. Lauraitis, Eds., American Society

for Testing and Materials, 1977, p. 3-26.

4-9 Sendeckyj, G.P., Stalnaker, H.D., and Kleismit, R.A. "Effect of Temperature on Fatigue

Response on Surface- Notched [(0/45/0s]3 Graphite/Epoxy Laminate, Fatigue of

Filamentary Composite Materials, ASTM STP 636, K.L. Reifsnider and K.N. Lauraitis,

Eds., American Society for Testing and Materials, 1977, p. 123-140.

4-10 Sims, D.F., and Brogdon, V.H., Fatigue Behavior of Composites Under Different

Loading Modes, Fatigue of Filamentary Composite Material, ASTM STP 636, K.L.

Reifsnider and K.N. Lauraitis, Eds., ASTM, 1977, p. 185-205.

4-11 Sun, C.T., and Roderick, G.L., Improvements of Fatigue Life of Boron/Epoxy LaminatesBy Heat Treatment Under Load, Fatigue of Filamentary Composite Materials, ASTM STP

636, K.L. Reifsnider and K.N. Lauraitis, Eds., ASTM, 1977, p. 89-102.

4-12 Sun, C.T., and Chen, J.K., On the Impact of Initially Stressed Composite Laminates,

Journal of Composite Materials, Vol. 19 (Nov. 1985).

346



8/11

4-13 Roderick, G.L., and Whitcomb, J.D., Fatigue Damage of Notched Boron/Epoxy

Laminates Under Constant-Amplitude Loading, Fatigue of Filamentary Composite

Materials, ASTM STP 636, K.L. Reifsnider and K.N. Lauraitis, Eds., American Society

for Testing and Materials, 1977, p. 73-88.

4-14 Highsmith, A.L., and Reifsnider, K.L. Internal Load Distribution Effects During Fatigue

Loading of Composite Laminates, Composite Materials: Fatigue and Fracture, ASTMSTP 907, H.T. Hahn, Ed., American Society for Testing and Materials, Philadelphia, PA,

1986, p.233-251.

4-15 Reifsnider, K.L., Stinchcomb, W.W., and O'Brien, T.K., Frequency Effects on a

Stiffness-Based Fatigue Failure Criterion in Flawed Composite Specimens, Fatigue of

Filamentary Composite Materials, ASTM STP 636, K.L. Reifsnider and K.N. Lauraitis,

Eds., American Society for Testing and Materials, 1977, p. 171-184.

4-16 Hahn, H.T., Fatigue of Composites, Composites Guide, University of Delaware, 1981.

4-17 Kundrat, R.J., Joneja, S.K., and Broutrnan, L.J., Fatigue Damage of Hybrid Composite

Materials, National Technical Conference on Polymer Alloys, Blends, and Composites,

The Society of Plastics Engineering, Bal Harbour, Fl, Oct. 1982.

4-18 Kim, R.Y., Fatigue Strength, Engineered Materials Handbook Volume 1, Composites,

ASM International, Materials Park, Ohio, 1987.

4-19 Talreja, R., Estimation of Weibull Parameters for Composite Material Strength and

Fatigue Life Data, Fatigue of Composite Materials, Technomic Publishing: Lancaster,

PA, 1987.

4-20 Sims, D.F. and Brogdon, V.H., "Fatigue Behavior of Composites Under Different

Loading Modes, Fatigue of Filamentary Composite Material, ASTM STP 636, K.L.

Reffsnider and K.N. Lauraitis, Eds., American Society for Testing and Materials, 1977, p.

185-205.

4-21 Engineers' Guide to Composite Materials, the American Society for Metals, Metals Park,

OH, 1987.

4-22 Burrel, et al. "Cycle Test Evaluation of Various Polyester Types and a Mathematical

Model for Projecting Flexural Fatigue Endurance." Reprinted from: 41st Annual, 1986,

SPI Conference, Section Marine 1, Session 7-D.

4-23 Konur, O. and Mathews, L., Effect of the Properties of the Constituents on the Fatigue

Performance of Composites: A Review, Composites, Vol. 20, No. 4 (July, 1989), p.

317-328.

4-24 Jones, David E., Dynamic Loading Analysis and Advanced Composites, SNAME SE

Section, May 1983.4-25 O'Brien, T. K., Delamination Durability of Composite Materials for Rotorcraft, U.S.

Army Research and Technology Activity, Langley, VA. LAR-13753.

4-26 Springer, G.S., Environmental Effects on Composite Materials, Technomic Publishing:

Lancaster, PA, 1984.

347



9/11

4-27 Leung, C.L. and D.H. Kaelble. Moisture Diffusion Analysis for Composite

Microdamage, Proc. of the 29th Meeting of the Mechanical Failures Prevention Group.

23-25 May 1979, Gaithersburg, MD.

4-28 Pritchard, G. and Speake, S.D., Tbe Use of Water Absorption Kinetic Data to Predict

Laminate Property Changes, Composites, Vol. 18 No. 3 (July 1987), p. 227-232.

4-29 Crump, S., A Study of Blister Formation in Gel-Coated Laminates, Proc. of the

International Conference Marine Applications of Composite Materials. 24-26 Mar. 1986.

Melbourne, FL: Florida Institute of Technology.

4-30 Marino, R., et al. The Effect of Coatings on Blister Formation. Proc. of the International

Conference Marine Applications of Composite Materials. 24-26 Mar. 1986. Melbourne,

FL: Florida Institute of Technology.

4-31 Kokarakis, J. and Taylor, R., Theoretical and Experimental Investigations of Blistered

Fiberglass, Proc. of the Third International Conference on Marine Application of

Composite Materials. 19-21 Mar. 1990. Melbourne, FL: Florida Institute of Technology.

4-32 Smith, J. W., Cracking of Gel Coated Composites 1: Microscopic and FractographicAnalysis. Proc. of the 43rd Annual Conference of the Composites Institute, The Society

of the Plastics Industry, Inc., 1-5 February, 1988.

4-33 Blackwell, E., et al. Marine Composite Structure Failures and Their Causes, Proc. of the

Atlantic Marine Surveyors, Inc. Blistering and Laminate Failures in Fiberglass Boat

Hulls. 9-10 Feb. 1988. Miami, FL.

4-34 Structural Plastics Design Manual published by the American Society of Civil Engineers,

ASCE Manuals and Reports on Enginering Practice No. 63, New York, 1984.

4-34 USCG NVIC No. 8-87. Notes on Design, Construction, Inspection and Repair of Fiber

Reinforced Plastic (FRP) Vessels, 6 Nov. 1987.

4-35 Timoshenko, S., Strength of Materials, Part I, Elementary Theory and Problems, RobertE. Krieger Publishing, Huntington, NY 1976.

4-36 Guide for Building and Classing High-Speed Craft, Preliminary Draft, October 1996,

American Bureau of Shipping, Houston, TX.

4-37 Military Standard MIL-STD-2031(SH), Fire and Toxicity Test Methods and Qualification

Procedure for Composite Material Systems used in Hull, Machinery and Structural

Applications Inside Naval Submarines, Department of the Navy, 26 February, 1991.

4-38 ASTM E 1317-90, Standard Test Method for Flammability of Marine Surface Finishes,

May 1990, ASTM, 100 Barr Harbor Dr., W. Conshohocken, PA 19428-2959.

4-39 SNAME T & R Bulletin, Aluminum Fire Protection Guidelines, Pavonia, NJ, 1974.4-40 Greene, Eric, Fire Performance of Composite Materials for Naval Applications, Navy

contract N61533-91-C-0017, Structural Composites, Inc, Melbourne, FL 1993.

5-1 How to Build a Mold, Marine Resin News. Reichhold Chemicals, Inc. Research

Triangle Park, NC, 1990.

5-2 Reichard, R. and Lewit, S., The Use of Polyester Fabric to Reduce Print-Through,

Proc. the SNAME Powerboat Symposium. 15 Feb. 1989. Miami, FL.

348



10/11

5-3 JIT Delivery Plan Set for RP Fabricators, Modem Plastics, (1989), p. 18.

5-4 Zenkert D. and Groth H.L, Sandwich Constructions 1," Proceedings of the lst Intl.

Conference on Sandwich Constructions, edited by K.A. Olsson, et al., EMAS, 1989, p.

363-381.

5-5 Venus-Gusmer Catalog. 5th Ed. Kent, WA, 1988.

5-6 Health, Safety and Environmental Manual. FRP Supply. Ashland Chemical, Richmond,

VA, 1989.

5-7 Safe Handling of Advanced Composite Materials Components: Health Information.

Suppliers of Advanced Composite Materials Association, Arlington, VA, 1989.

5-8 FFA Considers OSHA Proposed Agreement. Fabrication News, Composites

Fabrication Association, Vol. 11, No. 11 (Nov. 1989), p. 12-13.

5-9 Martinsen, S. and Madsen, C., Production, Research and Development in GRP

Materials, Proc. of the 3rd International Conference on Marine Applications of

Composite Materials. 19-21 March 1990. Melbourne, FL: Florida Institute of

Technology, 1990.

5-10 Walewski L. and Stockton, S., Low-styrene Emission Laminating Resins Prove it in the

Workplace, Modern Plastics, (Aug. 1985), p. 78-79.

5-11 Marshall, A.C., Composite Basics, Third Edition, published by Marshall Consulting,

Walnut Creek, CA, Dec 1993.

5-12 Lazarus, P., Vacuum-Bagging, Professional Boatbuilder, Brooklin, ME., No. 30,

Aug/Sep 1994, pp. 18-25.

5-13 personal correspondence with Phil Mosher, TPI, Warren, RI.

5-14 Seemann, Bill. Letter to Eric Greene. 11 April, 1990. Seemann Composites, Inc.,

Gulfport, MS.5-15 Gougeon Brothers Inc. GLRI25 Epoxy Resin/CLH226 Hardener Gougeon Laminating

Epoxy, Bay City, MI, 1987.

5-16 Juska, T. and Mayes, S., A Post-Cure Study of Glass/Vinyl Ester Laminates Fabricated

by Vacuum Assisted Resin Transfer Molding, U.S. Navy report

CARDIVNSWC-SSM-64-94/18, Survivability, Structures, and Materials Directorate,

March, 1995.

5-17 Juska, T., Loup, D. and Mayes, S., An Evaluation of Low Energy Cure Glass Fabric

Prepregs, U.S. Navy reportNSWCCD-TR-65-96/23, Survivability, Structures, and

Materials Directorate, September, 1996.

5-18 Miller B., Hybrid Process Launches New Wave in Boat-Building. Plastics World, Feb.

1989, p. 40-42.

5-19 Thiele, C., BASF AG, Ten Years of Light-Curing in UP Resins. The Current Situation

and Foresasts, distributed by Sunrez Corporation, El Cajon, CA.

5-20 Owens-Corning Fiberglas, Fiber Glass Repairability: A Guide and Directory to the

Repair of Fiber Glass Commercial Fishing Boats. No. 5-BO-12658. Toledo, OH, 1984.

349



11/11

5-21 Repair Manual for Boats and Other Fiber Glass Reinforced Surfaces, PPG Industries:

Pittsburgh, PA.

5-22 Proc. of Atlantic Marine Surveyors, Inc. Two Day Seminar Blistering and Laminate

Failures in Fiberglass Boat Hulls. 9-10 Feb. 1988. Miami, FL.

5-23 Inspection and Repair Manual for Fiber Reinforced Plastic Boats and Craft (T9008-B4-

MAN-010, Naval Sea System Command), 15 April 1992

5-24 Glass Reinforced Plastics Preventive Maintenance and Repair (MIL-HDBK-803), 20

April 1990

5-25 Manual for Major Repairs to Glass Reinforced Plastic Boats (NAVSHIPS

0982-019-0010, Naval Ship Systems Command), 1973

5-26 Smith, C.S., Design of Marine Structures in Composite Materials, Elsevier Science

Publishers LTD, 1990.

5-27 Cobb Jr., B., Repairs to Fiberglass Boats, Owens/Corning Fiberglas Corp., Toledo, OH,

1970.

5-28 Beale, R., Surveying and Repairing GRP Vessels, Fairplay Publications LTD, Coulsdon,

England, 1989.

5-29 Vaitses, A. H., The Fiberglass Boat Repair Manual, International Marine Publishing,

1988.

5-30 Marine Survey Manual for Fiberglas Reinforced Plastics, Gibbs and Cox Inc., 1962.

5-31 Thomas, R. and Cable, C. Quality Assessment of Glass Reinforced Plastic Ship Hulls In

Naval Applications, Diss. MIT 1985. Alexandria, VA: Defense Technical Information

Center, 1985.

5-32 U.S. Navy. MIL-C-9084C. Military Specification Cloth, Glass, Finished, for Resin

Laminates, Engineering Specifications & Standards Department Code 93, Lakehurst, NJ.9 June 1970.

5-33 Guide for Building and Classing High-Speed Craft and Guide for Building and Classing

Motor Pleasure Yachts, Oct, Nov 1990, respectively, American Bureau of Shipping,

Paramus, NJ.

6-1 46 CFR Part 170, et al., Small Passenger Vessel Inspection and Certification, Department

of Transportation, U.S. Coast Guard (typical CFR section, others apply)

6-2 various publications are available from the American Bureau of Shipping, ASB Paramus,

45 Eisenhower Drive, Paramus, NJ 07653-0910, 201-386-9100, FAX 201-368-0255.

6-3 Heller, S.R. & Jasper, N.H., On the Structural Design of Planing Craft, Transactions

RINA, 1960.

6-4 Savitsky, D. and Brown, P. W., Procedures for Hydrodynamic Evaluation of Planing

Hulls, in Smooth and Rough Water, Marine Technology, (October 1976).

6-5 Allen, R.G. and Jones, R.R., A Simplified Method for Detemiing Structural

Design-Limit Pressures on High Performance Marine Vehicles, AIAA 1987.

6-6 Spencer, J.S., Structural Design of Alumminum Crewboats, pp 267-274, Marine

Technology. New York, (1975).

350


z_text_references.pdf

Documents