zenara - roché awnings | patio | veranda€¦ · new, purist look sturdy housing means less...

ZenaraZenara LED

The avantgarde shape of the weinor Zenara makes it the designer awning among all awnings and shades. In modern houses, this cassette awning engages in harmonious dialogue with the facade, while on older buildings it provides a tantalising contrast. Since even the larger-sized versions measuring up to 6.5 m in width need just two wall connections, the weinor Zenara merges beautifully with the house to form a single whole. With its numerous innovations, the Zenara is also a true avantgardist in engineering terms.

Cassette awning

01

2018 | 01 Folding arm awnings | Cassette awning | Zenara

Innovative wall installation:For a purist design

weinor Opti-Flow-System®: Floating bearing to ensure the optimum deployment of the fabric

Zenara LED (optional):Integrated lighting

Fully concealed technology:For a seamless design

2

weinor LongLife arm:Very durable and low-noise

Ingenious tilting mechanism:for even more precise

Mounting options:Installation on walls, ceilings and rafters is possible

Wall mounting Ceiling mounting Rafter mounting

01

2018 | 01 Folding arm awnings | Cassette awning | Zenara

Zenara Highlights

3

Zenara Benefits

4

Innovative wall installation – for a new, purist design

The innovative, patent-pending technology housed in the weinor Zenara forms the backbone to its architectural shape: � Available in versions up to 6.5 m – requires just two installation points � New, purist look � Sturdy housing means less profile sagging � Versions at least 5.5 m wide supplied with wire tensioning

technology used in bridge construction

Completely concealed technology – for a seamless look

All of the technical components are concealed in the housing to save space. The advantage: � No visible brackets or screws

The user-friendly inspection flap makes for � Easy access to the BiConnect components � Easy maintenance of the electronic parts

Ingenious tilting mechanism – for even more precise adjustments

The technology of weinor’s tilting mechanism ensures the cassette closes very precisely. � Perfect spacing of fabric to arm � Awning can be inclined to between 5° and 40° � Wind lock safety device � Mechanical parts elegantly concealed

Wire tensioning technology, as used in bridge construction – only two fasteners required

Unlike in conventional awning technology, the Zenara requires just two wall attachments even for the wider versions. � Only two installation points � Same applies to larger models, from 5.5 m and above, thanks to the

innovative wire tensioning technology used in bridge construction

5 2018 | 01 Folding arm awnings | Cassette awning | Zenara

01

Zenara Technology

� standard � optional unavailable

Variants of the Zenara Zenara Zenara LED

Technology

Max. width 650 cm* 650 cm*

Max. projection 400 cm 400 cm

Cassette size (w x h) 251 x 160 mm 251 x 165 mm

Coupled systems

Motor drive � as standard; no crank � as standard; no crank

Angle of pitch on awning 5° to 40° 5° to 40°

Installation alternatives can be installed on walls, ceilings and rafters

LED lighting (separate spotlights) � integrated into the awning’s cassette

Patented weinor Opti-Flow-System® � as standard � as standard

LongLife arm � as standard � as standard

Accessories

Heating system Tempura � �

BiSens Agido-3V product protection sensor � �

Controls

Radio control � �

No remote � �

Weather sensors

Sun/wind sensor BiConnect BiSens SW-230 V

� �

Sun/wind sensor solar powered BiConnect BiSens SW-Solar

� �

Sun/wind/rain sensor BiConnect-BiSens-SWR-230V

� �

Quality

Tested up to wind resistance class 2 according to DIN 13561 (wind strength 5 on the Beaufort scale)

* A rain drain is used in the middle of the front profile with a width of 451 cm or more.

6

Zenara LED

LED lighting – 30,000 hours of lighting require minimal energy consumption

The select LED components represent the very best in weinor quality: � Integrated into the cassette � Atmospheric light thanks to special glass lenses � Lighting remains on even when awning is retracted � Highly energy-efficient � Operating life of 30,000 hours � Infinitely dimmable when used with BiConnect radio control � Easy to service: simply replace individual LED lights without

uninstalling the awning

Integrated LED lighting

Awning width in cm

Number of separate LED spotlights

Awning width in cm

Number of separate LED spotlights

228 – 250 3 451 – 500 8

251 – 300 4 501 – 550 9

301 – 350 5 551 – 600 10

351 – 400 6 601 – 650 11

401 – 450 7


01

Zenara Controls

Installation location for receiver, power supply pack and fur-ther electrical componentsThe receiver is accommodated in the cassette. The faceplate can be easily be opened for servicing purposes. The receiver, which is separate from the drive, is then easily accessible.

Installation location for electrical components

weinor BiConnect radio controller

Product Electronics BiConnect control Remote receiver Transmitter

Zenara Zenara drive � BiRec receiver integrated into cassette BiRec MA-K � BiEasy 1M/5M/15M/15M Go! hand transmitter

� App � 1MW-3V wall transmitter

Zenara LED Zenara drive and LED lighting � BiRec combi-receiver for main drive and LED spotlights (with integrated power supply pack) integrated into cassette

� Dimmable LED

BiRec MLED � BiEasy 5M/15M/15M Go! hand transmitter

� App

Accessories (optional)

Tempura/Tempura Quadra heating system

� Dimmable, additional receiver required � Installation of the reciever in the design bar provided for this purpose or the Tempura Quadra box

BiRec HD � BiEasy 5M/15M/15M Go! hand transmitter

� App

Requires: awning with BiConnect remote control and sensors require a BiEasy 1M, 5M, 15M or 15M Go!

8

Zenara Controls

Somfy RTS radio technology

Somfy io-homecontrol® radio technology

Product Electronics Somfy RTS control Remote receiver Transmitter

Zenara Zenara drive � Somfy RTS remote-controlled motor integrated into cassette

Somfy RTS remote-controlled motor

� Telis 1 RTS Pure/Telis 1 Soliris RTS Pure/Telis 4 RTS Pure/ Telis 4 Soliris RTS Pure hand transmitter

� Smoove 1 wall transmitter

Zenara LED Zenara drive and LED lighting � Somfy RTS remote-controlled motor integrated into cassette

� Additional Somfy receiver for the LED spot-lights (with downstream power supply pack) integrated into cassette

� LED not dimmable

Somfy RTS remote-controlled motor and Lighting Slim Receiver RTS

� Telis 4 RTS Pure/Telis 4 Soliris RTS Pure hand transmitter



� Not dimmable, additional receiver required � Installation of the reciever in the design bar provided for this purpose or the Tempura Quadra box

Heating Slim Receiver RTS Plug

� Telis 4 RTS Pure/Telis 4 Soliris RTS Pure hand transmitter

Product Electronics Somfy io-homecontrol control Remote receiver Transmitter

Zenara Zenara drive � Somfy io remote-controlled motor integrated into cassette

Somfy io remote-controlled motor

� Situo 1 io Pure/Situo 5 io Pure/Easy Sun io Pure Shine hand transmitter

� Smoove 1 io Pure Shine wall transmitter

Zenara LED Zenara drive and LED lighting � Somfy io remote-controlled motor integrated into cassette

� Additional Somfy receiver for the LED spot-lights (with downstream power supply pack) integrated into cassette


Somfy io remote-controlled motor and Lighting Receiver io

� Situo 5 io Pure/Easy Sun io Pure Shine hand transmitter



� Not possible with Somfy io control


01

Hard wired (existing switch/power supply on site)

Hard wired with Somfy control

Zenara Controls

Note:Please see the “Accessories” technical brochure for further details regarding the drive and control.

Some options are subject to a surcharge. For prices, please refer to the weinor awnings price list.

Product Electronics Hard wired Somfy control Control

Zenara Zenara drive � Somfy control for awning drive e.g. Soliris Smoove Uno

Zenara LED Zenara drive and LED lighting � Somfy control for awning drive � Switch on site for the LED spotlights � LED power supply pack integrated into the cassette


e.g. Soliris Smoove Uno and suitable light switch (on site)



� Not dimmable Suitable switch (on site)

Product Electronics Hard wired control Control

Zenara Zenara drive � Awning switch for the awning drive e.g. 2 double rocker switches (on site)

Zenara LED Zenara drive and LED lighting � Awning switch for the awning driveb � Switch on site for the LED spotlights � LED power supply pack integrated into the cassette


e.g. double rocker switch and suitable light switch (on site)



� Not dimmable Suitable switch (on site)

10

Zenara Planning

Determining the head clearance height

Angle of pitch

Projection in cm

150 200 250 300 350 400

5° 274 270 265 261 257 252

15° 248 235 223 210 197 184

25° 224 203 182 160 139 118

Head clearance height in cm (rounded figures)

Determining the projection

Angle of pitch

Terrace depth in cm

150 200 250 300 350 400

5° 151 201 251 301 351 400

15° 155 207 259 311 362 400

25° 166 221 276 331 386 400

Projection in cm (rounded figures)

� Find the projection by looking in the “Projection” table for the terrace depth. � Using the projection from the table and the required angle of pitch, consult the “head clearance height” table

for the head clearance height. This head clearance height refers to an installation height of 300 cm. � Add/subtract the difference between 300 cm and the actual installation height to/from the head clearance

height in the table.

Site measurements – determining the projection and head clearance height

This table can be used to find the awning projection for any given horizontal patio depth.

This table is used to find the head clearance heights for various projections when the angle of pitch is 5°, 15° or 25°. This table is based on the example of an installation height of 300 cm (upper edge of awning).

Projection

Inst

alla

tion

heig

ht

Head

cle

aran

ce h

eigh

t

Pitc

h

Patio depth


01

Zenara Planning

� Zenara standard wall bracket� Mounting plate 405 x 144 incl. 1 standard

wall bracket and covers

Width in cm

Number of arms

Projection in cm (irregular figures possible)

150 200 250 300 350 400

228 – 250 2 �

251 – 300 2 � �

301 – 350 2 � � �

351 – 400 2 � � � �

401 – 450 2 � � � � �

451 – 500 2 � � � � � �

501 – 550 2 � � � � � �

551 – 600 2 � � � � � �

601 – 650 2 � � � � � �

Wall mounting on C20/25 concretewith up to 200-mm facing, wind resistance class 2 and a permissible centic tensile load of 5.71 kN for anchor bolts

This is why the Zenara only needs two bracketsThe weight and wind load of the awning is conveyed as a tensile load from each of the two folding arms to the bracket located closest to the respective arm. The larger the bracket and the more suitable the fasteners that are used, the better this load can be spread. Requirement: when determining how far apart the fasteners should be spaced, it is important to take the installation surface into account and e.g. the divot caused by the fasteners (see manufacturer’s table).

Sizes and bracket recommendations

� The front profile should ensure the water drainage by means of a projection profile

� From a width of 451 cm it is placed in the centre of the front profile

Integrated rain drain

Wall bracket

12

Zenara Planning

weinor Zenara LED

Cross-sections

5

280

160

251

1895

Although the weinor Zenara only needs two brackets, it does not sag. This is made possible by our patent-pending wire tensioning system, the same type of technology that is used for bridge construction. The awning is pretensioned by a wire inside. This is so effective at preventing the housing from sagging that only one bracket needs to be attached to each end of the housing. This procedure was developed in cooperation with Siegen University.

Innovative wire tensioning technology, as used in bridge construction

Figures are in mm


01

The innovative design of the weinor Zenara means that it can be mounted in a wide range of ways: not only on a wall but also on a ceiling or a rafter. The brackets and mounting plates are made of extruded, powder-coated aluminium.

Preserves the building insulation: In future, it will only be necessary to drill into the wall of a building at two installation points. Therefore, there is less impact on the building’s insulation.

Zenara InstallationInstallation on walls, ceilings and rafters is possible

Wall mounting – brackets

98

14

126

130

58

16

148

14

61 832.5 75

M8

275

18

28016

0

95

Side view with wall bracket

(140 mm)

X +150 mm ±14 mm

X (140 mm)Bracket spacing

14

Zenara Installation

Mounting plate 660 x 390 x 15 mm

Ceiling front plate 520 x 200 x 15 mm


Wall mounting – mounting plates

100405

100 172

114

16

75

1430

15618 8(63) 265

8 x

45°

(17)

9320

38

2795

9 x

45°

22

238

6 x

20°

126

1.6

x 45

°14

4M12

R

200660

200 1530200

98175

126

M12

ø 13

340

95

390

2525

5

M12M12

ø 13ø 13


12698175

1530200200660

200

9517

085

2522

0

M12M12

M12

ø 13

ø 13ø 13

52020

15

95

6521198

350

ø 14

200

52.5

M12

M12

M12

ø 14

140140min. 40 min. 40

Ceiling

Side wall

Side wall

47 for ceiling bracketmin. 33 for wall bracket


01

Zenara Installation

Minimum spacing distances for installation

Ceiling mounting

275

160

321

206

21

23185.5 94

186

180

14157915

204014

12

8122

120

168

14

14

80

60

Ceiling bracket

Side view with ceiling bracket

16

Zenara Installation

Rafter mounting

300159

160

420

162

2483

min

. 33

300

Right-hand rafter bracket Rafter bracket with mounting plate for right-hand rafter. weinor recommends using mounting plates for rafter brackets.

420

16

25

80120

35

5

387

115

7023

35

14

14

R10

365

93

ø13

ø13

Side view: rafter bracket installation

Rafter bracket


01

Zenara Installation

Extraction forces

Wall mounting on C20/25 concrete with up to 200 mm of facingextraction force in N per upper fixing for wall bracket

Widthin cm

Projection in cm

150 200 250 300 350 400

250

732330182709

300

847 1262382 567211 314820 1222

350

961 1434 2024434 644 907239 356 502931 1389 1959

400

1076 1607 2265 3080485 722 1015 1378268 399 562 763

1042 1555 2192 2981

450

1191 1779 2505 3399 4327537 799 1123 1520 1933296 442 621 842 1071

1153 1722 2425 3291 4189

500

1305 1951 2746 3719 5356 6785589 876 1230 1663 2392 3027325 485 681 921 1326 1679

1264 1889 2658 3600 5185 6569

550

1420 2124 2987 4550 5830 7379640 954 1338 2035 2604 3292354 528 741 1127 1444 1826

1375 2056 2891 4404 5644 7143

600

1535 2296 3227 4918 6305 7972692 1031 1446 2200 2816 3557382 570 800 1219 1561 1973

1486 2223 3124 4761 6104 7718

650

1649 2468 3900 5286 6779 8566743 1109 1748 2365 3028 3822411 613 967 1310 1678 2119

1597 2389 3775 5118 6563 8293

Standard wall bracket Fasteners: 3* per bracket

Mounting plate, 405 x 144 mm incl. 1 standard wall bracket and covers Fasteners: 6* per bracket

Mounting plate, 660 x 220 mm incl. 1 standard wall bracket and covers Fasteners: 6* per bracket

Installation on front of concrete ceiling with standard wall bracket Fasteners: 3* per bracket incl. ceiling front plate Fasteners: 4* per bracket

* number of fixings required on site

The extraction force is the force with which the weight of the awning and the wind load pull on each upper fixing. The tables indicate this force in N per upper fixing. It varies depending on the awning size and the wall bracket/mounting plate used.

Selecting the wall bracket and anchoring system:

1. Consult relevant table for extraction force per fixing for selected awning size.

2. Select a wall bracket/mounting plate for which there is fixing material which can resist the indicated extraction force. Remember to take into account the spacing, the area which will be damaged if the fixing breaks out, the type of fixing material used and the mounting base.

See separate bracket overview for other bases.

F

F

F = force

18

Zenara Installation

Extraction forces

Rafter mountingShear forces in N per bracket for rafter mounting

Width in cm

Projection in cm

150 200 250 300 350 400

2501328

611

3001539 2301

712 1020

3501750 2617 3713

812 1162 1605

4001961 2932 4153 5519

913 1305 1799 2351

4502172 3248 4594 6106 89391013 1447 1992 2603 3749

5002383 3563 5035 6693 9808 124861114 1590 2185 2855 4115 5198

5502594 3879 5476 8159 10677 135771214 1732 2378 3463 4481 5654

6002805 4194 5916 8930 11544 146691315 1875 2571 3749 4846 6110

6503016 4510 7083 9501 12412 157601415 2017 3057 4035 5212 6566

Ceiling installation (on C20/25 concrete)Extraction force in N per upper fastener in ceiling bracket

Width in cm

Projection in cm

150 200 250 300 350 400250 455300 530 779350 605 888 1243400 679 997 1394 1889450 754 1106 1544 2087 2658500 829 1215 1695 2286 3272 4152550 903 1324 1845 2777 3564 4517600 978 1433 1996 3004 3856 4882650 1053 1543 2388 3230 4147 5248

Zenara ceiling bracket with wall bracket and cover Fasteners: 3* per bracket

* number of fixings required on site

1 rafter bracket and 1 standard wall bracket (150 mm) and covers, each for left- and right-hand side

1 rafter bracket and 1 mounting plate and 1 standard wall bracket (150 mm) and covers, each for left- and right-hand side

F F

F = force


01

As

of: 0

8/20

18 Z

We

rese

rve

the

rig

ht t

o m

ake

tech

nic

al c

han

ges

as

wel

l as

chan

ges

in r

ang

e an

d p

rod

uct

po

rtfo

lio. F

or t

ech

nic

al r

easo

ns,

th

e co

lou

rs m

ay a

pp

ear s

ligh

tly

diff

eren

t wh

en p

rin

ted

.

Terrazza patio roof with lateral SUPER LITE

fixed glazing

AwningAwning

with Valance Plus and Tempura

Awning with Valance Plus

and Paravento

Terrazza patio roof

with Sottezza II sun protection

Glasoase® with conservatory awning

WGM Top and full glass sliding door w17 easy

AWNINGS

PATIO ROOFS AND GLASOASE®

Premium qualitymade in Germany

CUSTOMISED, SYSTEMISED SOLUTIONS

PERGOLA AWNINGS

Pergola awning Plaza Viva

and Paravento

Pergola awning weinor PergoTex II

with VertiTex II

Pergola awning weinor PergoTex II

and Tempura

20Awnings Patio roofs Glasoasen®

zenara - roché awnings | patio | veranda€¦ · new, purist look sturdy housing means less...

Documents