Product Process Flow Chart

The production process of welded steel fabric goes through the process of cold rolled longitudinal and cross wire, which passes through the mesh-welding machine, which is controlled electronically by resistance welder. The YTS welded steel fabric is available in metric and imperial standard dimension with ribbed and plain wire.

In order to continue enhancing the satisfaction of our valued customer, we have implemented a Quality Management System (QMS) according to the requirements of ISO9001-2000. We achieved our ISO9001 certification in the year 2005. 

In fact the quality of our products meet the standards set by Standard and Industrial Research Institute of Malaysia (SIRIM) Berhad. We also passed the license of SIRIM certification in the year 2005. 

YTS is consistently improving and upgrading itself. We invest in more machinery to produce high quality products, increasing our production outputs to meet our valued customers requirements, and provide with a competitive edge.

Production

Technical

WELL CONTROLLED

YTS fabric is manufactured on automatic welding machines under controlled environment to achieve consistent quality. YTS fabric is subjected to regular testing at our in-house laboratory to ensure quality products for users.

PREVENTING

*Causes - Distributing of load & effective crack

The smaller diameter and closely wires of welded wire fabric have the ability to provide a more uniform stress distribution and more effective crack control in concrete slabs and walls than the large diameter steel bars which are usually widely spaced. 

*Design

The wide range of wire diameter and spacing available also makes it possible to provide almost exactly the required cross-sectional steel area. 

*Adaptability

YTS fabric can easily be bent into almost any required form or shape. It has the right degree of ductility to allow it to be bent and yet it is sufficiently rigid to maintain its form ater bending. 

TECHNICAL SUPPORT

Users of YTS fabric, are assured of competent and reliable technical support who uses the most advanced Autocad System and service which is provided by a team of dedicated and experienced technical personnel.

PRE-SALE SERVICE

*Consultation and advice on the feasibility of using steel welded fabric.*Providing alternative design proposals and works planning that meets the requirements.

AFTER SALE SERVICE

*Providing effective site coordination to facilitate prompt delivery of goods.*Providing assistance in the supervision of mesh laying

Quality Standard

Welded Steel Fabric

Yetta Steel Welded Steel FabricThe standard metric and imperial welded steel fabric specification are shownin table 1 & table 2. All metric standard mesh dimension are 6.0 meters by 2.20 meters.

ET TA REF. NO.

MS 145 or BS4483 Ref. No.

Main Wire Cross Wire Cross Sectional Area Mass Per Unit Area (Kg/m2)Diameter

(mm)Spacing

(mm)Diameter

(mm)Spacing

(mm)Main

(mm2/m)Cross

(mm2/m)SQUARE MESH

A12   12 200 12 200 566 566 8.89A10 A393 10 200 10 200 393 393 6.16A9 A318 9 200 9 200 318 318 4.99A8 A252 8 200 8 200 252 252 3.95A7 A193 7 200 7 200 193 193 3.02A6 A142 6 200 6 200 142 142 2.22A5 A98 5 200 5 200 98 98 1.54A4 A63 4 200 4 200 63 63 0.99

RECTANGULAR MESHB10 B785 10 100 8 200 785 252 8.14B9 B636 9 100 8 200 636 252 6.97B8 B503 8 100 8 200 503 252 5.93B7 B385 7 100 7 200 385 193 4.53B6 B283 6 100 7 200 283 193 3.73B5 B196 5 100 7 200 196 193 3.05

LONG RECTANGULAR MESHC10 C785 10 100 6 400 785 71 6.72C9 C636 9 100 6 400 636 71 5.55C8 C503 8 100 5 400 503 49 4.34C7 C385 7 100 5 400 385 49 3.41C6 C283 6 100 5 400 283 49 2.61C5 C196 5 100 5 400 196 49 1.93

SMALL SQUARE MESHD10 DA785 10 100 10 100 785 785 12.32D9 DA636 9 100 9 100 636 636 9.98D8 DA503 8 100 8 100 503 503 7.90D7 DA385 7 100 7 100 385 385 6.04D6 DA283 6 100 6 100 283 283 4.44D5 DA196 5 100 5 100 196 196 3.08D4 DA126 4 100 4 100 126 126 1.97

All imperial Std. Mesh dimension are 6.0 meters x 2.0 meters except the rolls40 meters x 2.0 meters.YET TA REF.

NO.BS1221

A1984

 

Main Wire Cross Wire Cross Sectional Area Mass Per Unit Area (Kg/m2)Diameter

(mm)Spacing

(mm)Diameter

(mm)Spacing

(mm)Main

(mm2/m)Cross

(mm2/m)

SQUARE MESH61 121 7.62 150 7.62 150 304 304 4.6962 122 7.01 150 7.01 150 256 256 3.9763 123 6.40 150 6.40 150 214 214 3.3164 124 5.89 150 5.89 150 176 176 2.8165 125 5.38 150 5.38 150 151 151 2.3466 126 4.88 150 4.88 150 124 124 1.92

610 130 3.25 150 3.25 150 55 55 0.86

STANDARD

YTS welded wire fabric is manufactured to comply to the requirement of Malaysian Standard MS145:2001 - Steel Fabric for the Reinforcement of Concrete. The cold reduced steel wires used in the manufacturing of YTS fabric complies to the Malaysian Standard MS144:2001 - Cold Reduced Mild Steel wire for the reinforcement of Concrete, which stipulates a minimum characteristic yield strength (0.2% proof stress) of 485 N/mm2. While the shear strength of each weld is at least half of the yield strength (250 N/mm2) of the wires which ensures that the necessary anchorage can be developed. 

PURPOSES

YTS fabric as a reinforcing material for concrete is suitable for most of the reinforcement of concrete structures such as concrete floor slabs, shear walls, retaining walls, footing, concrete roads and pavements, concrete drains, prcast concrete components and also for anti-crack purposes.

ADVANTAGES

TIME AND LABOUR

YTS fabric can be produced normal cut-to-size same form in which time labour can be saved from sorting, cutting and tying. 

MATERIALS SAVED

Wastage will be saved with the use of cut-to-size YTS fabric. The usage of conventional steel bars usually results in a wastage of 5% or more, depending on the level of supervision and control. Furthermore, with a characteristic yield strength of 485 N/mm2 which is superior to that of normal steel bars, less steel will be used to achieve the same strength. The specified characteristic yield strength of the various type of steel bars in comparision to hard drawn steel wire which is used to manufacture our YTS fabric.

About Us

Yetta Steel Industries Sdn. Bhd. (YTS)commenced mesh production since early 2000. The mesh Plant is situated at Sungai Petani Industrial Estate in Kedah.

YTS Welded Steel Fabric is widely used in the construction industry. Coupled with other hardware products from the group of companies, we cater a complete range of products for the construction industry. 

Yet Ta fabric complies with the Malaysian Standard MS 145 : 1987

RANGE OF PRODUCTS

1. Reinforcing Steel Fabric2. Galvanize (G1) Wire Mesh3. Steel Wire Mesh4. Hard Drawn Steel Wire5. Steel Bar

SPECIAL FABRIC

YTS fabric can be manufacture according to customers' specific requirements. The fabric can be up to 2.4 meter in width, 9.0 meter in length and normal cut-to-size.

OUR COMMITMENT

a. To provide best services to our valued customersb. To meet our valued customers requirements and satisfaction.c. To enhance relationships with our valued customers.d. To deliver our products on timee. To produce and maintain high quality standard products.