xmic tech sheet

2
Xmic Advanced electronic acoustic leak detection Halma Water Management Features Simple (one button) or manually selectable filters Multi-function display showing: Noise level (graphically and digitally) Dynamical sensitivity, (signal strength) Improved sound quality Levels of leak noise can be recorded for comparison in a histogram profile (MLP) IP65 enclosure with mil-spec connectors A pair of good quality headphones. For more information call +44 (0) 1633 489479 or visit www.hwm-water.com A Halma Group Company g Company is ISO 9001 Registered No.06134A FLOW MEASUREMENT DATA LOGGING LEAK DETECTION PRESSURE MANAGEMENT USER FRIENDLY DESIGN CLEAR GRAPHICS PORTABLE Introduction The Xmic (pronounced ex- mike) is an advanced, electronic ground microphone designed to amplify the noise generated by water escaping from buried supply pipes under pressure. Identifying the position of the loudest leak noise indicates the position of the actual leak itself. The Xmic system comprises of a lightweight portable amplifier module complete with battery charger, a pair of aviation quality headphones and an acoustically shielded ground microphone foot. As an optional extra, a hand held listening probe is available. This comes with a tripod foot and two probe rods for sounding in soft ground. Xmic is an advanced yet easily used Ground Microphone System. The latest acoustic and amplification technology provides excellent sound quality, whilst a range of features help effective and accurate pinpointing on site. Minimum (noise) Level Profiling (MLP). The easy-to-use advanced features of the Xmic enable the operator to pinpoint leaks faster and with more confidence than ever before. In MLP mode (when sampling) the Xmic records the lowest level in the last three seconds (the background leak noise), and builds a visual graph of these levels. HIGH VISIBILITY SCREEN

Upload: hazliza-abu

Post on 24-Apr-2015

71 views

Category:

Documents


8 download

TRANSCRIPT

Page 1: Xmic Tech Sheet

XmicAdvanced electronic acoustic leak detection Halma Water Management

Features■ Simple (one button) or manually

selectable filters

■ Multi-function display showing:Noise level (graphically and digitally)Dynamical sensitivity, (signal strength)

■ Improved sound quality

■ Levels of leak noise can be recorded forcomparison in a histogram profile (MLP)

■ IP65 enclosure with mil-spec connectors

■ A pair of good quality headphones.

For more information call +44 (0) 1633 489479or visit www.hwm-water.com

A Halma Group Company g Company is ISO 9001 Registered No.06134A

F L OW M E A S U R E M E N T DATA L O G G I N G L E A K D E T E C T I O N P R E S S U R E M A NAG E M E N T

USERFRIENDLYDESIGN

CLEARGRAPHICS PORTABLE

IntroductionThe Xmic (pronounced ex-mike) is an advanced,electronic ground microphonedesigned to amplify the noisegenerated by water escapingfrom buried supply pipesunder pressure. Identifying theposition of the loudest leaknoise indicates the position ofthe actual leak itself.

The Xmic system comprises ofa lightweight portable amplifier module complete withbattery charger, a pair of aviation quality headphonesand an acoustically shielded ground microphone foot. Asan optional extra, a hand held listening probe isavailable. This comes with a tripod foot and two proberods for sounding in soft ground.

Xmic is an advanced yet easily used GroundMicrophone System. The latest acoustic andamplification technology provides excellent soundquality, whilst a range of features help effective andaccurate pinpointing on site.

Minimum (noise) Level Profiling (MLP). The easy-to-useadvanced features of the Xmic enable the operator topinpoint leaks faster and with more confidence than everbefore. In MLP mode (when sampling) the Xmic recordsthe lowest level in the last three seconds (thebackground leak noise), and builds a visual graph ofthese levels.

HIGHVISIBILITY

SCREEN

Page 2: Xmic Tech Sheet

XmicAdvanced electronic acoustic leak detection

P R O D U C T S P E C I F I C A T I O N

Halma Water Management

F L OW M E A S U R E M E N T DATA L O G G I N G L E A K D E T E C T I O N P R E S S U R E M A NAG E M E N T

g Halma Water Management a Division of Palmer EnvironmentalTy Coch House Llantarnam Park Way Cwmbran Gwent NP44 3AW United Kingdom

g Tel: +44 (0) 1633 489479 Fax: +44 (0) 1633 877857 g [email protected] www.hwm-water.comg Registered Address: Ty Coch House Llantarnam Park Way Cwmbran Gwent NP44 3AW

g Registered in England No: 1463016

HW

MXm

ic6/

2007

Control UnitProcessor: 4MHz 16 bitInput impedance: 1MOhmOutput impedance: 6 to 16 OhmsAmplification: 46dBFrequency range: 30 to 3000HzDistortion: Better than 1%Battery: 2 x Lithium ion 1.8Ah rechargeable batteriesBattery life: Minimum 25 hours (without backlight)Battery charge: Maximum 8 hoursCharger: Universal 110-240V AC mains charger with 12V DCoutputWeight: 1kgDimensions: 206mm x 167mm x 86mmEnvironmental rating: IP65Operating temperature range: 0 - 50°COperating humidity: 0 – 95% non-condensingConnection: Military specification AmphenolKeypad: Membrane with push buttonDisplay: 128 x 128 transflective LCDSignal level display 0 – 99

Filter OptionsVariable High Pass and Low Pass filters across frequency rangeThree automatic filter settings based on pipe materialMetallic – High Pass 350Hz, Low Pass 3kHzPlastic – High Pass 75Hz, Low Pass 3kHzBroadband – High Pass 30Hz, Low Pass 3kHz

MicrophoneHigh sensitivity piezo-electric sensor mounted in windproof,nitrile rubber housingLow noise 1.5m cable (detachable)Weight: 2.9kg

Hand Probe Attachment (Optional Upgrade)The hand probe option includes the tripod and two stainless steelprobe rods (each400mm in length)Combined weight of rods 162g

HeadphonesSennheiser HD215 headphones are supplied as standard with theXmic.Aviation Quality Headphones available as option

HWM reserve the right to change the specification ofany product without prior notice.