xl-hp515 (sm-s4422xlhp515u)
TRANSCRIPT
SERVICE MANUALXL-HP515
No. S4422XLHP515U
MICRO COMPONENT SYSTEM
XL-HP515MODEL
SHARP CORPORATION
CONTENTS
This document has been published to be usedfor after sales service only.The contents are subject to change without notice.
CHAPTER 1. GENERAL DESCRIPTION[1] IMPORTANT SERVICE NOTES (FOR
U.S.A. ONLY) ................................................. 1-1[2] SPECIFICATIONS ......................................... 1-1[3] NAMES OF PARTS........................................ 1-2
CHAPTER 2. ADJUSTMENTS[1] ADJUSTMENT............................................... 2-1[2] TEST MODE .................................................. 2-3[3] Standard Specification of Stereo System
Error Message Display Contents ................... 2-5
CHAPTER 3. MECHANICAL DESCRIPTION[1] REMOVING AND REINSTALLING THE
MAIN PARTS ................................................. 3-1[2] DISASSEMBLY .............................................. 3-3
CHAPTER 4. DIAGRAMS[1] BLOCK DIAGRAM ......................................... 4-1
CHAPTER 5. CIRCUIT DESCRIPTION[1] WAVEFORMS OF CD CIRCUIT .................... 5-1[2] VOLTAGE....................................................... 5-2
CHAPTER 6. CIRCUIT SCHEMATICS AND PARTSLAYOUT[1] NOTES ON SCHEMATIC DIAGRAM ............6-1[2] TYPES OF TRANSISTOR AND LED ............6-1[3] WIRING SIDE OF PWB/SCHEMATIC DIA-
GRAM............................................................6-2
CHAPTER 7. FLOWCHART[1] TROUBLESHOOTING ..................................7-1
CHAPTER 8. OTHERS[1] FUNCTION TABLE OF IC .............................8-1[2] FL DISPLAY ................................................ 8-11
Parts Guide
XL-HP515 Micro Component System consisting of XL-HP515 (main unit) and CP-HP515 (speaker system).
•
In the interests of user-safety the set should be restored to its origi-nal condition and only parts identical to those specified be used.
XL-HP515
AudioXL-HP515Service ManualXLHP515MarketE CHAPTER 1. GENERAL DESCRIPTION[1] IMPORTANT SERVICE NOTES (FORU.S.A. ONLY)BEFORE RETURNING THE AUDIO PRODUCT
(Fire & Shock Hazard)
Before returning the audio product to the user, perform the followingsafety checks.
1. Inspect all lead dress to make certain that leads are not pinched orthat hardware is not lodged between the chassis and other metal parts in the audio product.
2. Inspect all protective devices such as insulating materials, cabinet,terminal board, adjustment and compartment covers or shields, mechanical insulators etc.
3. To be sure that no shock hazard exists, check for leakage current inthe following manner.
* Plug the AC line cord directly into a 120 volt AC outlet.
* Using two clip leads, connect a 1.5k ohm, 10 watt resistor paral-leled by a 0.15µF capacitor in series with all exposed metal cabinetparts and a known earth ground, such as conduit or electricalground connected to earth ground.
* Use a VTVM or VOM with 1000 ohm per volt, or higher, sensitivityto measure the AC voltage drop across the resistor (See diagram).
* Connect the resistor connection to all exposed metal parts having areturn path to the chassis (antenna, metal cabinet, screw heads,knobs and control shafts, escutcheon, etc.) and measure the AC voltage drop across the resistor.
All check must be repeated with the AC line cord plug connectionreversed.
Any reading of 0.3 volt RMS (this corresponds to 0.2 milliamp. AC.) ormore is excessive and indicates a potential shock hazard which mustbe corrected before returning the audio product to the owner.
[2] SPECIFICATIONS
FOR A COMPLETE DESCRIPTION OF THE OPERATION OF THIS UNIT, PLEASE REFER TO THE OPERATION MANUAL.
TO EXPOSEDMETAL PARTS
CONNECT TOKNOWN EARTHGROUND
TEST PROBE
0.15 µ F
1.5k ohms10W
VTVMAC SCALE
Specifications for this model are subject to change without prior notice.
��
�
�
�
�
General
Amplifier
CD player
Tuner
Cassette deck
Speaker
Power source AC 120 V, 60 HzPowerconsumption
80 W
Dimensions Width: 7-1/4" (185 mm)Height: 10-1/4" (260 mm)Depth: 12" (307 mm)
Weight 13.7 lbs. (6.2 kg)
Output power 75 watts minimum RMS per channel into 6ohms from 100 Hz to 20 kHz, 10% total har-monic distortion
Output terminals Speakers: 6 ohmsHeadphones: 16 - 50 ohms (recommended:32 ohms)Subwoofer pre-out (audio signal):200 mV/10 k ohms at 70 Hz
Input terminals Video/Auxiliary (audio signal): 500 mV/47 kohms
Type 5-disc multi-play compact disc playerSignal readout Non-contact, 3-beam semiconductor laser
pickupD/A converter 1-bit D/A converterFrequencyresponse
20 - 20,000 Hz
Dynamic range 90 dB (1 kHz)
Frequency range FM: 87.5 - 108 MHz
AM: 530 - 1,720 kHz
Frequencyresponse
50 - 14,000 Hz (normal tape)
Signal/noise ratio 50 dB (recording/playback)
Wow and flutter 0.3 % (WRMS)
Type 2-way type speaker system
2" (5 cm) tweeter
5-1/8" (13 cm) woofer
Maximum inputpower
150 W
Rated input power 75 W
Impedance 6 ohms
Dimensions Width: 6-1/2" (165 mm)Height: 10-1/4" (261 mm)Depth: 9-11/16" (246 mm)
Weight 6.2 lbs. (2.8 kg)/each
1 – 1
XL-HP515
[3] NAMES OF PARTSFront panel
1. Disc Trays2. Timer Indicator3. Power On/Stand-by Button4. Clock/Timer Button5. CD Track Down or Fast Reverse, Tape Fast Wind,
Tuner Preset Down, Time Down Button6. Tape Reverse Play Button7. Tape Reverse Mode Select Button8. Cassette Compartment9. Headphone Jack
10. Disc Tray Open/Close Button11. Disc Number Select Buttons12. CD Direct Play Button13. Illumination Light14. Volume Control15. CD Track Up or Fast Forward, Tape Fast Wind,
Tuner Preset Up, Time Up Button16. Memory/Set Button17. Equalizer Mode Select Button18. Extra Bass/Demo Mode Button19. CD Play or Repeat, Tape Forward Play Button20. CD or Tape Stop Button21. CD Button22. Tuner (Band) Button23. Tape Button24. Video/Auxiliary Button25. Tape Record Pause Button26. Tuning Up Button27. Tuning Down Button
111
12
14151617181920
10
2
34
13
9
567
8
23
24
21 2627
25
22
�
■
■
■
Display
1. Disc Number Indicators2. CD Play Indicator3. CD Pause Indicator4. Memory Indicator5. CD Repeat Play Indicator6. CD Indicator7. Extra Bass Indicator8. Tape Reverse Play Indicator9. Tape Forward Play Indicator
10. Tape Reverse Mode Indicator11. FM Stereo Mode Indicator12. Daily Timer Indicator13. FM Stereo Receiving Indicator14. Tape Record Indicator15. Sleep Indicator16. Timer Play Indicator17. Timer Recording Indicator
Rear panel
1. Cooling Fan2. Speaker Terminals3. AC Power Cord4. FM 75 Ohms Antenna Terminal5. FM Antenna Ground Terminal6. AM Loop Antenna Jack7. Video/Auxiliary (Audio Signal) Input Jacks8. Subwoofer Pre-output Jack
Speaker system
1
4
5
7
6
8
108 976321 4 5
15 16 17
1211 1314
3
2 1. Tweeter2. Woofer3. Bass Reflex Duct4. Speaker Wire
1 3
4
2
1 – 2
XL-HP515
� Remote control
1. Remote Control Transmitter2. Disc Number Select Buttons3. CD Track Down or Fast Reverse, Tape Fast Wind,
Tuner Preset Down, Time Down Button4. Volume Up and Down Buttons5. Disc Direct Search Buttons6. Equalizer Mode Select Button7. Extra Bass Button8. Power On/Stand-by Button9. CD Button
10. Tuner (Band) Button11. Tape Button12. Video/Auxiliary Button13. CD Track Up or Fast Forward, Tape Fast Wind,
Tuner Preset Up, Time Up Button14. Clock/Timer Button15. CD Random Button16. CD Clear/Dimmer Button17. CD Stop Button18. Tape Reverse Play Button19. Tape Stop Button20. Memory/Set Button21. CD Pause Button22. CD Play or Repeat Button23. Tape Forward Play Button24. Tape Record Pause Button
1
2
5
6
3
4
7
1112
13
910
8
14
15 20
21
23
24
16
17
18
19
22
1 – 3
XL-HP515
AudioXL-HP515Service ManualXLHP515MarketE CHAPTER 2. ADJUSTMENTS[1] ADJUSTMENT
1. MECHANISM SECTION• Driving Force Check
• Torque Check
2. TUNER SECTIONfL: Low-range frequency
fH: High-range frequency
• AM IF/RF
Signal generator: 400 Hz, 30%, AM modulated
• FM RF
Signal generator: 1 kHz, 40 kHz dev., FM modulated
• FM IF
Signal generator: 10.7MHz FM modulated
• Tape Speed
3. CD SECTION• Adjustment
Since this CD system incorporates the following automatic adjust-ment functions, readjustment is not needed when replacing thepickup. Therefore, different PWBs and pickups can be combinedfreely.
Each time a disc is changed, these adjustments are performedautomatically. Therefore, playback of each disc can be performedunder optimum conditions.
Items adjusted automatically
1) Offset adjustment (The offset voltage between the head amplifieroutput and the VREF reference voltage is compensated inside theIC.)
* Focus offset adjustment
* Tracking offset adjustment
Torque Meter Specified ValuePlay: TW-2111 Over 80 g
Torque Meter Specified ValuePlay: TW-2111 30 to 80 g.cmFast forward: TW-2231 70 to 180 g.cmRewind: TW-2231 70 to 180 g.cm
Test Stage Frequency FrequencyDisplay
Setting/Adjusting
Parts
InstrumentConnection
AM IF 450 kHz 1,602 kHz T351 *1AM Band Coverage
— 531 kHz (fL): T3061.1 ± 0.1 V
*2
AM Tracking 990 kHz 990 kHz (fL): T303 *1
*1. Input: Antenna Output: TP302*2. Input: Antenna Output: TP301
Test Stage Frequency FrequencyDisplay
Setting/Adjusting
Point
InstrumentConnection
FM Band Coverage
— 87.50 kHz T301 (fL):1.3 ± 0.1 V
*1
FM RF 98.00 MHz(10-30 dB)
98.00 MHz L312 *2
*1. Input: Antenna Output: TP301*2. Input: Antenna Output: Speaker terminal
Test Stage Frequency FrequencyDisplay
Setting/Adjusting
Point
InstrumentConnection
IF 10.7 MHz 98 MHz T302(Turn the core of trans-former T302 fully counter-clock wise)
*1
*1. Input: Antenna Output: TP301
Test Tape Adjusting Point
Specified Value
Instrument Connection
Normal speed
MTT-111 Variable Resistor in motor.
3,000 ± 30 Hz Speaker Ter-minal (Load resistance: 6 ohms)
Figure 1
Figure 2 ADJUSTMENT POINTS
TAPE MECHANISM
TapeMotor
Variable Resistor in motor
AMLOOP
ANTENNAIC
302
T351
T301
IC30
3
T303
T306
T302
L312
CNP301
SO302
IC301
TP302
TP301
AM TRACKING fL
AM BANDCOVERAGE fL
AM IF
FM RF
FM IF
FM OSC
FM ANTENNATERMINAL
TUNER PWB-C
20
R35
6
C393
2 – 1
XL-HP515
2) Tracking balance adjustment3) Gain adjustment (The gain is compensated inside the IC so that theloop gain at the gain crossover frequency will be 0 dB.)
* Focus gain adjustment
* Tracking gain adjustment
4. CD ERROR CODE DESCRIPTION
* 'CHECKING'
If Error is detected, 'CHECKING' will be displayed instead of 'ER-CD**'. 'ER-CD**' display will only be displayed when error had beendetected for the 5th times.
Error Explanation01 When Pickup set inner position, inner switch cannot detect
'ON' level for 10 secs.10* CAM error. Can't detect CAM switch when CAM is moving. 11* When it detect cam operation error during initialize process.20* TRAY error. Can't detect TRAY switch when TRAY is mov-
ing.21* When it detect TRAY operation error during initialize pro-
cess.31 When it change to CD function, DSP cannot read initial data.
2 – 2
XL-HP515
[2] TEST MODE• Setting the test modeDuring stand-by mode, press ON/STAND-BY button while pressing
down the button and X-BASS/DEMO button. then, press the CDbutton to enter the test mode.
IL isn’t done
OPEN/CLOSE operation is using manual. IL isn’t done
<< >>,<< >>buttons make pick's slide possible. IL isn’t done
to page 2-4<<PLAY>> key input.
C D T E S T
A
Do TOC IL. Do normal play.When these following key is input into PLAY key, track num-ber can be appoint directly.
<<MEMORY>>key input.
<< 1>> key: Track 4
<< 2>> key: Track 9
<< 3>> key: Track 15
Adjustment result automatically willdisplay as below for each 2 sec:a) "FOF_XXXX"b) "TOF_XXXX"c) "TBAL_XX"d) "TGAN_XX"f) "FGAN_XX"g) "RFLS_XX"
––––––––<<STOP>> key input.
STOP
explanation:a) Focus off set = "FOF_XXXX"b)Tracking off set = "TOF_XXXX"c)Tracking balance = "TBAL_XX"d)Tracking Gain = "TGAN_XX"f) Focus Gain = "FGAN_XX"g) RF level shift = "RFLS_XX"VOL — Last memoryP.GEQ — FLATX-BASS — OFFTo cancel : Power OFF
2 – 3
XL-HP515
Sliding the PICKUP with<< >>, << >> button must only bein STOP mode.
<<MEMORY>> key input.
Laser ON.
<<MEMORY>> key input.
Tracking OFF play at that specific point.
<<MEMORY>> key input.
Tracking ON play from that specific point.
<<MEMORY>> key input.
Adjustment result automatically will display as below for each 2 sec :a) "FOF_XXXX"b) "TOF_XXXX"c) "TBAL_XX"d) "TGAN_XX"f) "FGAN_XX"g) "RFLS_XX"
<<STOP>> key input.
STOP
explanation:a) Focus off set = "FOF_XXXX"b)Tracking off set = "TOF_XXXX"c)Tracking balance = "TBAL_XX"d)Tracking Gain = "TGAN_XX"f) Focus Gain = "FGAN_XX"g) RF level shift = "RFLS_XX"VOL — Last memoryP.GEQ — FLATX-BASS — OFFTo cancel : Power OFF
A
2 – 4
XL-HP515
[3] Standard Specification of Stereo System Error Message Display Contents(*) CHECKING:
If CD changer mechanism error is detected, 'CHECKING' will be display instead of 'ER-CD**'. 'ER-CD**' display will only be display when error hadbeen detected for the 5 th times.
Speaker abnormal detection and +B PROTECTION display
In case speaker abnormal detection or +B PROTECTION had occurred, it can be check by pressing 'POWER', ' ' and 'X-BASS' button. Micro-Computer version number will displayed as "U******".
Press ‘VIDEO/AUX’ button during version number display and then press ‘POWER’, ‘MEMORY/SET’ and ‘VIDEO/AUX’ button. Display will show "S**B**". S is referring to speaker abnormal detection and B is referring to +B PROTECTION. ** is in hex valve.
+B PROTECTION is condition when irregular process occur on power supply line.
BEFORE TRANSPORTING THE UNIT
The following process need to be taken after set tapering/parts replacement.
1. Press the ON/STAND-BY button to enter stand-by mode.
2. While pressing down the button and the X-BASS/DEMO button, press the ON/STAND-BY button. The Micro Computer version number willbe displayed as "U******".
3. Press OPEN/CLOSE button until "WAIT"--> "FINISHED" appears.
4. Unplug the AC cord and the unit is ready for transporting.
Error Contents DISPLAY NotesCD Pickup Mechanism Error. 'ER-CD01' PU-IN SW Detection NG.
CD Changer Mechanism Error. 'ER-CD**' (*) 10: CAM SW Detection NG during normal operation11: CAM SW Detection NG during initialize process20:TRAY SW Detection NG during normal operation21:TRAY SW Detection NG during initialize process
CD DSP Communication Error. 'ER-CD31' DSP COMMUNICATION ERROR.Focus Not Match/IL Time Over. 'NO DISC'
TUNER PLL Unlock.FM MHz
PLL Unlock.87.50
2 – 5
XL-HP515
AudioXL-HP515Service ManualXLHP515MarketE CHAPTER 3. MECHANICAL DESCRIPTION[1] REMOVING AND REINSTALLING THEMAIN PARTS
1. TAPE MECHANISM SECTIONPerform steps 1 to 9 of the disassembly method to remove the tapemechanism.(see page 3-3,3-4)
1.1. How to remove the Record/Playback Head (See Fig. 1)1. When you remove the screws (A1) x 2 pcs and (A2) x 1 pc., the
record/playback head can be removed.
1.2. How to remove the Pinch Roller (See Fig. 2)1. Carefully bend the pinch roller pawl in the direction of the arrow
<A>, and remove the pinch roller (B1) x 1 pc., in the direction of thearrow <B>.
NOTE: When installing the pinch roller, pay attention to the springmounting position.
1.3. How to remove the Belt (See Fig. 3)1. Remove the main belt (C1) x 1 pc., from the motor side.
2. Remove the FF/REW belt (C2) x 1 pc.
1.4. How to remove the Motor (See Fig. 4)1. Remove the screws (D1) x 2 pcs., to remove the motor.
Figure 1
Figure 2
Figure 3
Figure 4
(A1)x2Ø2x6mm
(A2)x1Ø2x9mm
Record/PlaybackHead
Erase Head
Clutch Ass'y
Pinch Roller(B1)x1 <A>
<B>
PinchRollerPawl
Pull
Main Belt(C1)x1
FF/REWBelt(C2)x1
Motor
FF/REWClutch
Flywheel
(D1)x2Ø2.6x5mm
Motor
Clutch Ass'y
3 – 1
XL-HP515
2. CD MECHANISM SECTIONPerform steps 1 to 4 and 11 to 12 of the disassembly method toremove the CD mechanism.(see page 3-3,3-4)2.1. How to remove the Optical Pickup (See Fig. 1)1. Remove the stop washer (A1) x 1 pc and gear (A2) x 1 pc.
2. Remove the screws (A3) x 2 pcs and shaft (A4) x 1 pc.
3. Remove the optical pickup.
NOTE: After pulling out the optical pickup connector, wrap the tip of itwith conductive aluminium foil or the like to protect the opticalpickup from the static electricity.
2.2. How to remove CD Disc (See Fig. 2~6)1. When CD is at play position, rotate reduction gear C clock-wise as
shown in Figure 2 Until disk tray is at ‘STOCK’ position, then rotatethe gear further to eject the disk tray (Figure 6) so that CD can beremoved from the tray.
2. In another case, if CD mechanism is at tray No. 1 play position andto remove CD located in tray No. 3, the procedure is as follows:
If the gear up down board is located at tray No. 1 position, thenrotate Reduction gear C clock-wise until Disc tray is at stalk‘STOCK’ position. Rotate reduction gear D clock-wise (Figure 3) tomove the CD mechanism to tray No. 3 position. This is confirmedby checking the gear up down board position Base on the markingas indicated on the main chassis as shown in Figure 4.
• Usually changer is covered with top plate. As for reference pur-pose, we exclude the top plate for easy viewing. (Figure 5,6)
Figure 6
CD Disc
CD At 'PLAY' position.
Disc Tray
Guide Tray
CD Disc
CD At 'STOCK' position.
CD Disc
Tray eject
Remove CD from tray.
Figure 5
Figure 1
Figure 4
(A3) x2ø2.6 x5mm
CDMechanism
Stop Washer(A1) x1
Optical Pickup
Gear(A2) x1
Shaft(A4) x1
Reduction gear D
Figure 3
Up Down
Reduction gear C
Front
Figure 2
Rear
Mark 1(DISC 1)
(DISC 2)
(DISC 3)
(DISC 4)
(DISC 5)
Gear up down board
Mark 3 Mark 5
Mark 2 Mark 4
3 – 2
XL-HP515
[2] DISASSEMBLYNote 1:
After removing the connector for the optical pickup from the connector,wrap the conductive aluminium foil around the front end of the connec-tor so as to protect the optical pickup from electrostatic damage.
Caution on DisassemblyFollow the below-mentioned notes when disassembling the unit and reassembling it, to keep it safe and ensure excellent performance:1) Take cassette tape and compact disc out of the unit.2) Be sure to remove the power supply plug from the wall outlet
before starting to disassemble the unit.3) Take off nylon bands or wire holders where they need to be
removed when disassembling the unit. After servicing the unit, be sure to rearrange the leads where they were before disas-sembling.
4) Take sufficient care on static electricity of integrated circuits and other circuits when servicing.
STEP REMOVAL PROCEDURE FIGURE1 Cabinet 1. Screw..........................(A1) x11 12 Rear Panel Top 1. Screw............................(B1) x2 13 CD Changer unit 1. Hook.............................(C1) x2
2. Socket..........................(C2) x13. Flat Cable.....................(C3) x1
2
4 Rear Panel Bot-tom
1. Screw...........................(D1) x9 2
5 Front Panel 1. Screw...........................(E1) x32. Flat Cable....................(E2) x23. Socket..........................(E3) x14. Hook............................(E4) x2
2,3
3
6 Turner PWB 1. Screw............................(F1) x12. Socket..........................(F2) x1
23
7 Main PWB 1. Screw...........................(G1) x22. Socket.........................(G2) x4
2,44
8 Power PWB 1. Screw...........................(H1) x4 49 Terminal PWB 1. Screw............................(J1) x1 4
10 Display PWB 1. Knob.............................(K1) x12. Screw...........................(K2) x 83. Flat Cable....................(K3) x 1
5
11 Tape Mechanism 1. Screw...........................(L1) x 4 512 Headphones PWB 1. Screw..........................(M1) x 1 513 CD Servo PWB
(Note 1)1. Screw...........................(N1) x22. Flat Cable...................(N2) x 23. Socket..........................(N3) x1
6
14 CD Mechanism 1. Screw...........................(P1) x42. Screw...........................(P2) x4
67
Figure 1
Figure 2
Figure 3
(A1) x1ø3x10mm
(A1) x2ø3x8mm
(A1) x1ø3x10mm
(A1) x1ø3x8mm
(A1) x2ø3x8mm
(B1) x2ø3x10mm
(A1) x2ø3x8mm
(A1) x2ø3x8mm
Front Panel
Cabinet
RearPanel Bottom
RearPanel Top
(D1) x9ø3x8mm
(F1) x1ø3x8mm(G1) x1
ø3x10mm
(E1) x1ø3x10mm
(E2) x1
(C2) x1
(C3) x1
Front Panel
RearPanel Bottom
Hook(C1)x1
Hook(C1)x1
Pull
Pull
CD ChangerUnit
Main PWB
HeadphonesPWB
CD Servo PWB
(F2) x1
(E1) x2ø3x10mm
Front Panel
Turner PWB
Main PWB
(E2) x1
Pull
(E3) x1
TapeMechanism
Pull
Hook(E4)x1
Hook(E4)x1
3 – 3
XL-HP515
Figure 4
Figure 5
Figure 6
(G1) x1ø3x6mm
(H1) x4ø4x6mm
(J1) x1ø3x6mm
(G2) x2(G2) x2
Terminal PWB
Main PWB
Power PWB
(K2) x8ø2.6x8mm
(L1) x4ø3x10mm
(M1) x1ø3x10mm
(K3) x1
(K1) x1
Front Panel
HeadphonesPWB
CassetteHolder
Display PWB
TapeMechanism
(N1) x2ø3x10mm
(N2) x2
(N3) x1
(P1) x2ø3x10mm
(P1) x2ø3x10mm
CD ChangerUnit
CD Servo PWB
Figure 7
STEP REMOVAL PROCEDURE FIGUREWoofer/Tweeter
1. Net Frame................(A1) x12. Catching Holder.......(A2) x43. Screw.......................(A3) x44. Front Panel..............(A4) x15. Screw.......................(A5) x6
8
Figure 8
(P2) x4ø2.6x10mm
CD ChangerUnit
CD Mechanism
Net Frame( A1 ) x1
Screwdriver
(A5)x2ø3.5x14mm(A3)x2
ø3.5x16mm
(A2)x2
(A2)x2
(A3)x2ø3.5x16mm
(A5)x4ø3.5x14mm Woofer
Front Panel( A4 ) x1
Tweeter
3 – 4
XL-HP515
AudioXL-HP515Service ManualXLHP515MarketE CHAPTER 4. DIAGRAMS[1] BLOCK DIAGRAM
+B5
+B5 +B5 +B10
M
+B8(D_+5V)
+B9(SW_+5V)
+B_PROTECT
+B7(A_+5V)
VIDEO/AUXR
LRL
ATTñ20dB
Q108
REC/PLAY
CLK
CEDI
L
R
BIAS
MUTINGAC BIAS
L
L
R
R
R
LTAPE
TUNER
CD
PB
CNP2FROM CD SECTION
HEADERASE
SWITCHING
SWITCHING
SWITCHING
BIASQ113
Q114
Q112
SWITCHING
OSCBIAS
Q105Q106
REC /P.B. HEAD
TAPE R-CHL-CH
AUDIO PROCESSORLC75341
RL
REC
R
L
R REC
L REC
SWITCHING L(TA)
R(TA)
/PLAYBACK AMP.PLAYBACK AND RECORDAN7345K
Q107
+B5
UNS
SY
ST
EM
MU
TE
17
3
1
2
2
718
4
21
13
169
232
21
13
12
14
16
11
1
4
9
10
15
3
24
12
15
11
7 18 8 23
+B5
+B4
H/N
P.B
REC
A_+10V
LD_+8V
FM/A
MOU
T RL
FM/A
M
MPX
IN MO/
ST
VC
OFM DET
FM+B
GND
AM
IF
AM
MIX
OU
T
Q601Q602 Q604
Q603
IC601
JK690
CNS2
Q104Q101-
IC101
L103Q111 Q110Q109
Q851
FM+B
+B5
CLK
+B5
AM IFOSCBUFF
10.7 MHz
450 kHz
DO
DI
CE
MO
/ST
SWITCHING
FM
/AM
IC302LC72131
PLL(TUNER)
ST
ER
EO
AM
RF
IN
AMO
SCIN
AMOS
COU
T
FMQ360
Q361
VT
OSC
X3524.5 MHZ
AM BANDCOVERAGE
AMTRACKING
FM RFFM OSC
FM IF
T303 T306
L312 T301
X351456 kHz
ZD3515.1V
CF351 IC303LA1832S
FM IF DET.FM MPX./AM IF
CF352T351
CF302T302
Q302
BF301B.P.F
9 10
18
541 3
217
9 85 17
6
21
21
20 22 11
17
1615
13
14
12 20
15
162324
4
7
+B5
3 84
19
6
5 7
AM LOOPANTENNA
FM ANTENNATERMINAL
CNP301
SO302
IC301TA7358AP
FM FRONT END
+B6
2
1
Figure 4-1 BLOCK DIAGRAM (1/3)
4 – 1
XL-HP515
+B10
+B10+B10
+B10
+B3
+B10
+B
3
AN80T53MULTI REGULATOR
23 56 7 1 4
+B4(8V)
2A 125V
2A 125V
4A 125V
4A12
5V
D842-D845
POWERTRANSFORMER
RELAYDRIVER
AC_RLY
P_IN
AC
_RLY
T_S
OL
T_M
OT
OR
VOL_JOG
PROTECT
+B8(D_5V)+B7(A_5V)
+B7(A_5V)
+B9(SW_+5V)
+B_PROTECT
13V
SW
VC
C
GN
D
5.1V
8.5V
10V
VL+ V
Lñ GN
D
SMUTE
TIME LED
SP_RLYT_R
EC
/PLA
Y
T_B
IAS
VLOAD
VOL_LED
P_IN
AC
120V
,60
Hz
SU
PP
LYC
OR
DA
CP
OW
ER
SP DET
ñVF
T.F
VD
D
TRANSFORMERPOWER
REGULATORVOLTAGE
UNSW_5.6V AN78L05VOLTAGE
REGULATOR
VR701
VOLUME
KEY
ASS'YMECHANISM
TAPE
DRIVER
4A 125V
R-OUTL-OUT
STK412-000POWER AMP.
LR
VLñ
VHñ
VL+
VH+
VF1
VF2
M971
RESET
SYSTEM MICROCOMPUTER
4.19403MHz
REMOTE SENSOR
VD
D-2
0dB
AT
T
+B10
+B10LED701
LED708
+B5
VD
D
+B3
FAN MOTOR
FL DISPLAY
CE
CLK
DI
DO
TO CD SECTION
RESET
AVDD
REMOCON
HEADPHONES
SUB WOOFERPRE-OUT
SPEAKER TERMINAL
M
SY
ST
EM
MU
TE
8
11
61
14
18
7
48
32 413128
52
4443
242115121176
10
17 18 19 203 4
21 21 44 45
78
69
80
83
84
23
1
31
30
29
47
53
56
41
42
45
5
79
36
38 46 254059 13
33
34
39
1 2 16
100
(SUB)
(MAIN)
MOTOR/
DRIVERSOLENOID
_+10V
D_+8V
SW701-SW705SW709-SW728
IXA020AW
FL701
RX701
Q906
XL700
Q701,702Q712~715
Q904
Q901IC901
F802Q604Q603
IC854
Q841
851
Q801
F804
F803
IC851
D802
D801
F801
F80
5
PT801JK953
JK701
SO901RL914
Q905
Q711 Q703
RL841RELAY
IC701
PT841
RELAY
Figure 4-2 BLOCK DIAGRAM (2/3)
4 – 2
XL-HP515
FO
CU
S/T
RA
CK
ING
/S
PIN
/SLE
DD
RIV
ER
+B7
RC
HO
LRV
SS
LCH
O
LVD
D
RV
DD
GN
D
GN
D
TR
–
TR
+T
R+ FO
+F
O+
FO
–
F CBAEVC
C
PIC
KU
PU
NIT
TR
–
VR
EF
MO_SPEED
CN
P3
CN
P5
CN
P4
CN
B1
CN
P2
Q1 Q2
LDD
VR
EF
LDS
DV
DD
XV
DD
AV
DD
1
AV
DD
2
DV
DD
VV
DD
A+5
V
A+5
VFIN
EIN
CIN
AIN
DIN
BIN
+B8
+B8
––+ +
MO_SPEED/CONT6
MOT_A-/CONT4
TR
–
TR
+
CA
M–
CA
M+
+5V
PH
OT
OD
ISC
CLA
MP
TR
AY
_SW
1
TR
AY
_SW
2
D_G
ND
CD
_RE
S
TR
AY
_SW
2
PH
OT
O
D_G
ND
+5V
A_+
5V
+B4
+B8
+B8
CONT1
0.82
µH
CD
DIG
ITA
LS
IGN
AL
PR
OC
ES
SO
R
LC78
648E
IC1
MOT_A+/CONT5
MO_B+/CONT3
MO_B-/CONT2
SLDO
SPDO
FDO
TDO
XIN
XOUT
DR
F
*RE
S
*WR
QD
ODI
CL
CE
FROM DISPLAY SECTIONTO MAIN SECTION
D_G
ND
16.9
344
MH
zX
L1
+B4
R-C
H
AG
ND
L-C
H
DG
ND
D_+
5V
WR
Q
DR
F
CE
DO
DI
CL
CLA
MP
DIS
C
TR
AY
_SW
1
+8V
MM
3433
810
3231
2421
22 23 19 20
5
1 2 35 36 3 4 5 6
3026
725
279
28
11 13 15 17
4847
7961
5655
541
540
4628
25
19 20 2613 49 1 27 60 80 7 8 9 10 1514
3621
2223
24
6564 66 67 68636245414243441 2 3 54 6 7 8 12345613 12 11 10 9 8 714
1 2 3 4 5 6 7 8 9 10 11
1 2 3 4 5 6 7 8 9 10 11
6 4 3 1
3536
7074
75
2V
CO
NT
6V
CO
NT
5VREFIN
SVCC
PVCC1
VO
4–
VO
3+V
O3–
VO
4+
PGND1
SGND
PGND2
VO
1–V
O1+
VO
2–V
O2+
VIN
2V
IN1
VIN
4V
IN3
VO6+
VO6–
VO5+
VO5–
LA62
61IC
2
RE
V5
FW
D5
RE
V6
FW
D6
PVCC2
SLE
DM
OT
OR
SP
IND
LEM
OT
OR
PIC
KU
P-IN
–+ –+MM
TR
AY
MO
TO
R
DIS
C
CLA
MP
TR
AY
SW
1
TR
AY
SW
2
MA
INC
AM
MO
TO
R
PH
OT
OIN
TE
RR
UP
TE
R
SW
1A
M1A
M2A
M1
RX
1SW
3
SW
2
SW
1
SW
4 M2
Figure 4-3 BLOCK DIAGRAM (3/3)
4 – 3
XL-HP515
AudioXL-HP515Service ManualXLHP515MarketE CHAPTER 5. CIRCUIT DESCRIPTION[1] WAVEFORMS OF CD CIRCUIT
T
FDO
TDO
StoppedCH1=500 mVDC 10:1
CH3=500 mVDC 10:1
500 ms/div(500 ms/div)
NORM:20 kS/s
1
3
=Record Length=Smoothing : ON CH1 : 0.000 V
CH2 : 0.0 VMain : 100 KZoom : 2 K
Mode : AUTOType : EDGE CH1Delay : 0.0 nsHold off : 0.2 µs
CH3 : 0.000 VCH4 : 0.00 V
BW : FULL
=Trigger==Filter= =Offset=
CH1v/DIV500 mV
1 IC1 21
2 IC1 22
T
FDO
DRF
TE
StoppedCH1=500 mVDC 10:1
CH2=10 VDC 10:1
CH3=1 VDC 10:1
500 ms/div(500 ms/div)
NORM:20 kS/s
1
2
3
=Record Length=Smoothing : ON CH1 : 0.000 V
CH2 : 0.0 VMain : 100 KZoom : 2 K
Mode : AUTOType : EDGE CH1Delay : 0.0 nsHold off : 0.2 µs
CH3 : 0.00 VCH4 : 0.00 V
BW : FULL
=Trigger==Filter= =Offset=-3 div -1 div 0 div +1 div +3 div
CH Position To
CH2Position0.20 div
1 IC1 21
3 IC1 68
4 IC1 17
Vp-p=1.0 V~1.3 V0.5 mV/div,0.5 µsec/div
5 IC1 4
T
T
TE
DRF
StoppedCH1=10 VDC 10:1
CH2=1 VDC 10:1
100 ms/div(100 ms/div)
NORM:100 kS/s
2
1
=Record Length=Smoothing : ON CH1 : 0.0 V
CH2 : 0.00 VMain : 100 KZoom : 2 K
Mode : NORMALType : EDGE CH1Delay : 2.924 msHold off : 0.2 µs
CH3 : 0.00 VCH4 : 0.00 V
BW : FULL
=Trigger==Filter= =Offset=
3 IC1 68
4 IC1 17
T
T
FDO
SPDO
StoppedCH1=200 mVDC 10:1
CH2=500 mVDC 10:1
500 ms/div1999/04/07 09:51:15
(500 ms/div)NORM:20 kS/s
2
1
=Record Length=Smoothing : ON CH1 : 0.000 V
CH2 : 0.000 VMain : 100 KZoom : 2 K
Mode : NORMALType : EDGE CH2Delay : 2.924 msHold off : 0.2 µs
CH3 : 0.00 VCH4 : 0.00 V
BW : FULL
=Trigger==Filter= =Offset=
1 IC1 21
6 IC1 24
T
FDO
PDO2
PDO1
StoppedCH1=500 mVDC 10:1
CH3=1 VDC 10:1
CH4=1 VDC 10:1
500 ms/div(500 ms/div)
NORM:20 kS/s
1
4
3
=Record Length=Smoothing : ON CH1 : 0.000 V
CH2 : 0.0 VMain : 100 KZoom : 2 K
Mode : AUTOType : EDGE CH2Delay : 0.0 nsHold off : 0.2 µs
CH3 : 0.00 VCH4 : 0.00 V
BW : FULL
=Trigger==Filter= =Offset=
CH1v/DIV500 mV
1999/04/05 17:33:17
1 IC1 21
7 IC1 76
8 IC1 77
T
T
DOUT
StoppedCH1=2 VDC 10:1
500 ns/div1999/04/07 09:25:28
(500 ns/div)NORM:200 MS/s
1
=Record Length=Smoothing : ON CH1 : 0.00 V
CH2 : 0.00 VMain : 1 KZoom : 100
Mode : NORMALType : EDGE CH1Delay : 2.887 msHold off : 0.2 µs
CH3 : 0.00 VCH4 : 0.00 V
BW : FULL
=Trigger==Filter= =Offset=
9 IC1 39
T
T
DATA
DATACK
LRSY
StoppedCH1=2 VDC 10:1
CH2=2 VDC 10:1
CH3=2 VDC 10:1
5 µs/div(5 µs/div)
NORM:100 kS/s
1
2
3
=Record Length=Smoothing : ON CH1 : 0.00 V
CH2 : 0.00 VMain : 5 KZoom : 100
Mode : AUTOType : EDGE CH3Delay : 0.0 nsHold off : 0.2 µs
CH3 : 0.00 VCH4 : 0.00 V
BW : FULL
=Trigger==Filter= =Offset=
CH3v/DIV
2 V
1999/04/05 20:50:17
10 IC1 57
IC1 58
IC1 59
11
12
5 – 1
XL-HP515
[2] VOLTAGE3.20 V1.61V1.61 V1.60 V1.61 V3.06 V1.65 V1.65 V1.65 V1.65 V1.48 V0 V1.65 V0 V1.65 V1.47 V1.48 V0 V0 V0 V1.60 V0 V1.61 V1.61 V0 V0 V3.20 V0 V3.20 V0 V0 V1.59 V1.60 V3.20 V0 V0 V0 V0 V0 V0 V3.61 V0 V0 V1.80 V3.60 V0 V1.45 V1.49 V3.19 V3.79 V0 V0 V0 V0 V0 V0 V0 V0 V0 V3.20 V0 V0 V0.63 V0 V5.16 V5.18 V4.68 V0 V0 V0 V0 V0 V0 V4.86 V4.86 V3.01 V0 V1.12 V0 V3.20 V
1234567891011121314151617181920212223242526272829303132333435363738394041424344454647484950515253545556575859606162636465666768697071727374757677787980
PINNO. VOLTAGE
IC1
2.10 V2.20 V2.10 V2.20 V2.10 V2.20 V0 V4.37 V5.02 V3.20 V1.62 V1.65 V1.62 V1.65 V1.62 V0 V1.62 V1.64 V4.71 V4.71 V3.92 V3.11 V3.10 V2.50 V1.65 V0 V5.02 V8.68 V5.02 V0.59 V0.71 V0 V0 V0 V2.11 V2.20 V
123456789
101112131415161718192021222324252627282930313233343536
PINNO. VOLTAGE
IC2
0 V0 V0.57 V2.03 V0.44 V0 V0 V0.58 V3.45 V3.35 V0 V0 V6.97 V4.16 V0 V3.42 V0.57 V0 V0 V0.41 V2.03 V0.57 V0 V0 V
123456789
101112131415161718192021222324
PINNO. VOLTAGE
IC101
1.97 V5.15 V1.97 V1.98 V0 V0 V5.21 V3.59 V5.15 V0 V2.01 V1.25 V2.27 V1.13 V1.10 V1.95 V0 V1.29 V2.08 V1.29 V1.95 V1.95 V5.15 V3.65 V
123456789
101112131415161718192021222324
PINNO. VOLTAGE
IC303
0 V0 V0 V5.10 V5.10 V5.10 V5.10 V5.11 V5.10 V5.10 V5.10 V5.10 V5.10 V5.10 V5.10 V5.10 V5.10 V5.10 V5.10 V5.10 V5.10 V5.10 V10.20 V0 V
123456789
101112131415161718192021222324
PINNO. VOLTAGE
IC601
2.57 V0 V0 V0 V0 V5.22 V10.18 V4.75 V0 V0 V5.23 V0 V5.23 V0 V0 V2.59 V5.24 V0 V0 V10.18 V0 V2.57 V
123456789
10111213141516171819202122
PINNO. VOLTAGE
IC302
0 V0 V0.29 V0.20 V0 V0.29 V0.26 V0.29 V0.29 V
123456789
PINNO. VOLTAGE
IC301
5.22 V13.11 V20.66 V0 V19.72 V10.22 V8.67 V
1234567
PINNO. VOLTAGE
IC851
5.66 V0.61 V9.33 V
123
PINNO. VOLTAGE
IC854
4.74 V4.65 V0 V4.70 V4.72 V4.72 V0 V0 V0 V4.83 V2.27 V1.99 V0 V4.73 V0 V4.74 V0 V0 V5.22 V0 V0 V4.88 V0 V0 V0 V5.20 V0 V5.01 V5.01 V2.64 V5.01 V5.01V0 V0 V5.01 V1.67 V5.20 V5.01 V4.87 V0 V2.02 V0 V13.10 V0 V0 V4.74 V0 V4.61 V0 V0 V
987654321
302928272625242322212019181716151413121110
5049484746454443424140393837363534333231
PINNO. VOLTAGE
IC701
0 V0 V0 V0 V5.17 V5.17 V-29.70 V0 V-0.26 V-0.24 V-0.22 V-0.20 V-0.19 V-0.19 V-0.18 V-0.17 V-0.16 V0 V-29.90 V-29.90 V-29.90 V-29.90 V-29.90 V-19.76 V-27.40 V-24.87 V-22.29 V-22.30 V-30.13 V-27.43 V-14.60 V-27.20 V-19.30 V-6.08 V-21.85 V-27.22 V-21.89 V-17.00 V-27.38 V-27.10 V-27.07 V-27.00V-27.00 V-27.35 V-27.27 V-27.11 V-27.00 V-27.07 V-27.00 V-26.83 V
PINNO. VOLTAGE
51
6463
65666768697071727374757677787980
6261605958575655545352
8584
8687888990919293949596979899
100
838281
3.2 V94.3 mV3.2 V
ECB
PINNO. VOLTAGE
Q1
4.9 V3.2 V4.2 V
ECB
PINNO. VOLTAGE
Q2
2.1 V0 V0 V
ECB
PINNO. VOLTAGE
Q302
16.01 V0.4 mV10.01 mV
ECB
PINNO. VOLTAGE
Q360
0.3 mV0.2 mV0.3 V
ECB
PINNO. VOLTAGE
Q601
0.3 mV0.2 mV0.7 V
ECB
PINNO. VOLTAGE
Q602
0.4 mV0.2 mV0.7 mV
ECB
PINNO. VOLTAGE
Q603
0.4 mV0.1 mV0.7 V
ECB
PINNO. VOLTAGE
Q604
12.9 V0.8 mV12.9 V
ECB
PINNO. VOLTAGE
Q701
15.9 V10.0 mV12.9 V
ECB
PINNO. VOLTAGE
Q702
0.9 mV4.5 V0.9 mV
123
PINNO. VOLTAGE
Q703
10.01 V9.7 V207.2 mV
123
PINNO. VOLTAGE
Q711
-392.1 mV4.9 V392.4 mV
ECB
PINNO. VOLTAGE
Q712
12.9 V362.5 mV12.9 V
ECB
PINNO. VOLTAGE
Q713
9.8 mV4.5 V9.9 mV
ECB
PINNO. VOLTAGE
Q714
12.9 V9.8 mV12.9 V
ECB
PINNO. VOLTAGE
Q715
9.9 mV5.10 V9.8 mV
123
PINNO. VOLTAGE
Q719
24.1 mV126.0 mV0.8 V
ECB
PINNO. VOLTAGE
Q841
-0.18 mV-0.18 mV0.5 V
ECB
PINNO. VOLTAGE
Q901
0.16 mV0.5 V0.16 mV
ECB
PINNO. VOLTAGE
Q902
0.7 mV0.5 V-0.10 mV
ECB
PINNO. VOLTAGE
Q903
0.6 mV0.5 V-0.9 mV
ECB
PINNO. VOLTAGE
Q904
-29.12 V-29.77 V-42.4 V
ECB
PINNO. VOLTAGE
Q801
0.6 mV0.5 V0.8 mV
ECB
PINNO. VOLTAGE
Q908
-0.0 mV9.9 V15.1 V
123
PINNO. VOLTAGE
Q110
46.70 V22.90 V10.80 V-10.90 V-22.90 V-48.80 V0 V0 V0 V0 V0 V-47.40 V47.50 V-0.16 V-0.16 V-46.30 V-0.17 V-0.16 V
123456789101112131415161718
PINNO. VOLTAGE
IC901
5 – 2
XL-HP515
AudioXL-HP515Service ManualXLHP515MarketE CHAPTER 6. CIRCUIT SCHEMATICS AND PARTS LAYOUT[1] NOTES ON SCHEMATIC DIAGRAM
• Resistor:
To differentiate the units of resistors, such symbol as K and M areused: the symbol K means 1000 ohm and the symbol M means1000 kohm and the resistor without any symbol is ohm-type resis-tor. Besides, the one with “Fusible” is a fuse type.
• Capacitor:
To indicate the unit of capacitor, a symbol P is used: this symbol Pmeans pico-farad and the unit of the capacitor without such a sym-bol is microfarad. As to electrolytic capacitor, the expression“capacitance/withstand voltage” is used.
(CH), (TH), (RH), (UJ): Temperature compensation
(ML): Mylar type
(P.P.): Polypropylene type
• Schematic diagram and Wiring Side of P.W.Board for this modelare subject to change for improvement without prior notice.
• The indicated voltage in each section is the one measured by Digi-tal Multimeter between such a section and the chassis with no sig-nal given.
1. In the tuner section,
indicates AM
indicates FM stereo
2. In the main section, a tape is being played back.
3. In the deck section, a tape is being played back.
4. In the power section, a tape is being played back.
5. In the CD section, the CD is stopped.
• Parts marked with “ ” ( ) are important formaintaining the safety of the set. Be sure to replace these partswith specified ones for maintaining the safety and performance ofthe set.
[2] TYPES OF TRANSISTOR AND LED
REF. NO DESCRIPTION POSITIONSW1 CLAMP ON—OFFSW1A PICKUP IN ON—OFFSW2 TRAY SW1 ON—OFFSW3 TRAY SW2 ON—OFFSW4 DISC ON—OFFSW701 ON/STAND-BY ON—OFFSW702 CLOCK/TIMER ON—OFFSW703 REVERSE MODE ON—OFFSW704 REVERSE PLAY ON—OFFSW705 PRESET DOWN ON—OFFSW709 CD ON—OFFSW710 TUNER (BAND) ON—OFFSW711 VIDEO/AUX ON—OFFSW712 TAPE ON—OFFSW713 REC/PAUSE ON—OFF
SW714 TUNING/TIME UP ON—OFFSW715 TUNING/TIME DOWN ON—OFFSW716 STOP ON—OFFSW717 PLAY ON—OFFSW718 PRESET UP ON—OFFSW719 X-BASS/DEMO ON—OFFSW720 EQUALIZER ON—OFFSW721 MEMORY/SET ON—OFFSW722 DIRECT PLAY ON—OFFSW723 DISC 1 ON—OFFSW724 DISC 2 ON—OFFSW725 DISC 3 ON—OFFSW726 DISC 4 ON—OFFSW727 DISC 5 ON—OFFSW728 OPEN/CLOSE ON—OFF
REF. NO DESCRIPTION POSITION
(1) (2) (3)(S) (G) (D)E C B
FRONTVIEW
KRC102 SKRC104 SKRA107 SKTA1504 YKTA1271 YKTA1273 YKTA1274 Y
SVC347SSVC230C
FRONTVIEW
KTA1504 GRKTC3199 GRKTC3200 GRKTC3875 GRKTC3203 YKTC3194 YKRA102 S
6 – 1
XL-HP515
[3] WIRING SIDE OF PWB/SCHEMATIC DIAGRAMFigure 6-2 SCHEMATIC DIAGRAM (1/10)
NOTES ON SCHEMATIC DIAGRAM can be found on page 6-1
A
B
C
D
E
F
G
H
1 2 3 4 5 6
0.7V0V
0V
0V
0.7V0V
0V
0V
0V
0V
0V 0.7V
0.7V0V
0V
0V
9.3V 8.6V
9.3V
0V 3.4V
0V
0V
3.4V
0V0.7V 0.7V
0
TAPE MECHANISMAss'y(213)
6-11 11 - ECNP2
TO CD SERVO PWB
CD SIGNAL
12
11
10
9
8
7
6
5
4
3
2
1
24 23 22 21 20
54321
16171819
6 7 8 9
131415
10 11 12
REC_RS
PA
RE
D_GND
LD+8V
+
+B
+B
+B
A-5V
D_5V +B
+B
+B
CD_GND
L-CH
A_GND
R-CH
2
3
1
6
8
7
5
4
8
9
7
6
5
4
3
2
1
LD_+8V
CD_D_GND
A_+5V
D_+5V
CD_GND
CD_A_GND
TO
MA
INP
WB
(2/2
)6-
41
-E
~H
A_GND
M_GND
ERASE
T2_R2
T2_R1
T2_L1
T2_L2
ERASE HEAD
PLA
YB
AC
KH
EA
DR
EC
OR
D/ R-C
HL-
CH
6
3
7
8
5
4
1
2
6
3
5
4
1
2
6
3
5
4
1
2
MAIN PWB-A1(1/2)
R-CH
L-CH1
2
3
7
23
11
10
26
24
A_GND
TO
MA
INP
WB
(2/2
)6-
41
-D
– +
– +– + –+
–+
–+
–+
–+
CCBINTERFACE
AUX
DECK
TUNER
CD
112K 56K
112K 56K
Hich=CHROME
–
–
++Hich=T1+–
+
–
Nor
/CrO
2
RIP
PLE
ALC
ALC
VC
C
LSEL0
R
R
R
R
RSEL
RI
RTR
RBAS
ROU
VRE
VD
CL
L1
L2
L3
L4
LIN
LTRE
LBASS
LOUT
VSS
CE
DI
2
2
1
1
3
3
PLAYBACK SIGNAL
RECORD SIGNAL
HEAD PLATEBLOCK(213-1)
2.2K
180P
3.3K
KTC3200 GR
KTC3200 GR 47K
4.7K
KT
C38
75G
R
0.00
15
15K
12K
6.8K47/2
5330P1K
100/16
56
560P
0.033
100K 3.9K
12K56
330P1K
100/16
560P
47/2
5
6.8K0.033
100K 3.9K
1.5K
270P
4.7K
68K
100
22/1
6
220/
10
10K
22/16
0.00
33
47/2
5
5.6K
0.02
2
LC75341AUDIO PROCESSOR
AN
7345
K
220P
220P
1K
1K
3.3/
50
0.02
2 22/1
6
5.6K
4.7K
270P 1.
5K
100
0.02
2
10K
47/2
5
0.00
33
180P(CH) KTC3200 GR
3.3K
2.2K
KTC3200 GR
47K
4.7K
KT
C38
75G
R
0.00
15
100/16
4.7K
KRC104 S
15K
KRC104 S
10K10K
KTA1504 GR
150
22K
22K
22/5
0
2.2/
50
0
1.2
K
0.00
22
1/50
1/50
1/50
3.3K
0
0.15
0.15
1/50
0.0022
1/5010K
4.7/50
1/50
330
330
2.2K
2.2K
390
2.2K 2.2K
2.2K
KT
C38
75G
R
KT
C38
75G
R
KT
C38
75G
R
390
KT
C38
75G
R
2.2K
220K
10K10KKTC3
KT
C38
75G
R
BI601
CNS2
BI102
CNS102
R103
C103
R105
Q103
Q101 R107
R10
9
Q10
5
C10
5
R111
R12
1
R123C11
7
C109
R113
C111
R115
C115
C113
R117 R119
R122R116
C110R114
C112
C116
C11
8
R124C114
R118 R120
R13
0
C12
4R12
6
R15
0 R13
2
C13
3
C13
4
R13
4
C13
0
C13
2
R128
C12
8
IC601
IC10
1
C65
1
C65
2
R601
R602
C14
3
C12
1
C12
5
R12
9
R12
7 C12
3
R13
1 R13
3C
127
R13
5C
131
C12
9
C104Q104
R106
R104
Q102
R108
R11
0
Q10
6 C10
6
C141
Q114
R112
Q113
R147R146
Q112
R149
R62
1
R62
0
C64
0
C63
9
R645
R60
9
C62
5
C621
C619
C617
R607
R05
C605
C607
C615
C613
C611
C609R605
C623
R619
R618
R611
R610
R613
R617
R61
5
R616
Q60
4
Q60
3
Q60
1
R61
2
Q60
2R61
4
R136
R139R138
Q
Q10
8
R148
C126
FM SIGNAL
AUX SIGNAL
6 – 2
XL-HP515
Figure 6-3 SCHEMATIC DIAGRAM (2/10)
7 8 9 10 11 12
11.6
V
0V
11.6V 0V
0V
0V
0V
0.7V0V
6-9 11 - BTO DISPLAY PWB
24
23
22
21
20
19
18
17
16
15
14
13
131415
10 11 12
TA
PE
_A_G
ND
UNSW5.6V
P_IN
P_I
N
SW_5V
S_MUTE
M_+13V
A_+10V
+B
+B
+B
+B
+B
+B
+B
+B
+B
+B
+B_PROTECT
–20dB
–VF
VF1
VF2
–VF
VF
1
VF
2
SP_DET
D_GND
SP_RLY
AC_RLY CON
AC
_RLY
CO
N
REC/PLAY
T_BIAS
CLK
DI
CE
DO
(1/2W)
21
20
19
18
17
16
15
14
13
12
11
10
9
8
7
6
5
4
3
2
1
14
13
12
11
10
9
8
7
6
5
4
3
2
1
21
1
TUN_L
DO
TUN_R
CLK
DI
D_GND
A_GND
A_+10V
CE
L-CH
R-CH
VIDEO/AUX
4
3
2
1
M_G
ND
AP
RO
_GN
D
A_+
10V
+B
_PR
OT
EC
T
D_G
ND
M_+
13V
SW
_+5V
UN
SW
5.6V
SP
_DE
T
SP
_RLY
TO MAIN PWB(2/2)6-4 1 - D~H
45698 17 1822192521 12 16 15 14 13
FR
OM
TU
NE
RP
WB
6-7
10-
H
–+
–+
–+
–+
Nor
/CrO
2
RIP
PLE
ALC
ALC
VC
C
R1
R2
R3
R4
RSEL0
RIN
RTRE
RBASS
ROUT
VREF
VDD
CLK
CHASSISGND
1
2 3
FFC701
CNP701A
CN
S30
3
22/1
6
0.02
2
220/
10
10K
47/2
5
330µ
H
220
47K
4.7K
82
4.7
0.03
9(M
L)
0.0082
22K
47K
KT
C32
03Y
47/2
5
KTA1504 GR
0.04
7(M
L)
KRC104 S
390P
390P6.8K
6.8K
39K
39K
1CESSOR
AN
7345
KP
LAY
BA
CK
AN
DR
EC
OR
D/
PLA
YB
AC
KA
MP
.
10K
47/2
5
0.00
22
1.2K
10K
10K
1/50
1/50
4.7/50
1/50
1/50
1/50
0.022220/16
22/16
0.15
0.15
10K
6.8K
6.8K
1/50
1K
3.3K
0.0022
220P
0
220K
220K
10KKTC3875 GR
C13
3
C13
5
C13
4
R13
4C
132
L103
R158
R14
0
R141
R142
R145
C13
9
C138
R144
R143
Q11
1
C14
0
Q109
C13
7
Q110
CNP701B
CNP303
JK690C691
C690R690
R691
R693
R692
IC10
1
R13
5C
131
C62
6
R60
8
R642
R641
C624
C614
C616
C618
C620
C622
C602C601
C603
C608
C606
R604
R644
R643
C610
R603
R606
C612
C653
R06
R13
7R136
R139
Q107
6 – 3
XL-HP515
Figure 6-4 SCHEMATIC DIAGRAM (3/10)
A
B
C
D
E
F
G
H
1 2 3 4 5 6
DZ15BSBZD805
DZ6.2BSA
KRC104 S
DS1SS133
AN80T53MULTI REGULATOR
3300
/25
220/2522/25
10/50
3.3K
0.1
(ML)
22/25
22/2
5
22K
DS1
SS13
3
DS1
SS13
3
22K
10K
22K
DS
1SS
133D
S1S
S13
3
4 3 56 17 2
UNSW5.6V
VF1
P_IN
ñVF
VF2
AC_RELAY CON
APRO_GND
M_+13V
R_CH
A_GND
M_GND
+B_PROTECT
A_+10V
SP_DET
SP_RLY
L_CH1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26CD_GND
SW_+5V
3
1
2
A_+5V
LD_+8V
+B
+B
+B
+B
+B
+B+B
+B+B
+B
+B
+B
+B
+B
ñB
+B
ñB
ñB
ñB
+B
+B
+B +B +B
+B
+B
SW
MO
DE
1
10V
8.5V
5.1V
GN
D
VC
C
13V
TO
MA
INS
EC
TIO
N6-
22-
B,D
,E/6
-39,
10-H
D_+5V
D_GND
CD_D_GND
CD_A_GND
TAPE_A_GND
AGND
LG2(231)
LG1(231)
LG3(231)
CHASISGND
CHASISGND
15 14 1318 17 16 12 11 10 9 8 7 6 5 4 3 2 1
2
4
5
6
1
3
2
4
5
6
1
3
7
6
5
4
3
1
2
VF2
VF1
ñVFP_IN
UNSW_5.6V
AC_RELAY
HEATSINK
POWER AMP.
GND
VL-
VL+
VH-
VH+
1
2
3
4
5
6
7
8
1
2
3
5
4
6
7
8
9
9
10
1
2
3
4
5
6
7
8
9
10
10
11
GN
D
VL+VL-
VH
-
VH
+
-
+
-
+
0.1/50
0.1/500.1/
50
KTC3875 GR
DS
1SS
133
100/
50
100/
50
1.8K
1.5K 0.01
0.1
10
0.1
47K 47K
3300/63
1N4004S
DZ12BSB
33K
47/5
0
56K
56K
0.1
39K39K
DS
1SS
133
1N4004S
KT
C38
75G
R
4700/35
DS
1SS
133
KTC3875 GR
100
56K
3P(C
H)
(CH
)
(CH
)
1K
56K
3300/63
4700/35
DZ12BSB
100/
100
1.5K1.5K
22/5
056
0
100P
560
1.5K
0.00
1
0.00
1
56K
100/
100
1K
22/5
0
56K
0.01
KTC3875 GR 3µH
3µH
0.1
1.8K
0.22
1K
100/
100
1K
56K
0.22
100P
3P
100
100/
100
STK412-000
(3W
)
(3W
)
(ML)
(1/2W)(1/2W)
(1/4W)(1/4W)
(1/4W)(1/4W)
(1/2
W)
L
R
L
VH+VH- VL- VL+
(3W)
SP_DET
(1/4W)
(1/4W)
(3W)
(ML)
3.3
(1/2
W)
NOTES ON SCHEMATIC DIAGRAM can be found on page 6-1
BI8
02
CN
S80
2
CN
P80
2
ZD804
Q851
D865
IC851
C854C859
C855
R85
4
C87
4C865
C86
4
R86
4
D86
1
D86
0
R85
7
R859
R85
3
D86
2
D86
3
IC901
C85
6
CN
P80
1
CN
S80
1
BI8
01
C90
9
R90
9
C90
8
R90
7
C90
5R
905
C91
3
R90
6C
904
C90
3
C91
2
R910
C90
6
R91
1
R91
3
R903
R90
4
R91
6
C90
7
C91
0
R912
C91
4
C902
C90
1
Q901
R920
R92
1 C919
R922
Q902
R958R90
2
R908C
915
C91
1
R90
1
C946
D90
5
C91
8
C91
6
R929
ZD903
R928R927
D909
C922
D90
6
C920
C921
ZD902
R926R925
R91
8 C917
R917
R919
R930
C923
D910
C92
5
R93
4R
935
L901
D90
7 Q90
4
R93
7
C92
9R
941
R93
9
L902Q903
R86
3
FM SIGNAL
6 – 4
XL-HP515
Figure 6-5 SCHEMATIC DIAGRAM (4/10)
6 7 8 9 10 11 12
4A 125V
SUB WOOFERPRE-OUT
17
14
11
12
13
15
8
9
16
10
6
7
5
4
3
2
1
9
8
7
6
5 4
3
2
1
DS1SS133 RELAY
+B
+B+B
+B
+B
ñB
+B
+B +B +B
(231)
231)
SISD
CHASISGND
M_+13.0V
SP_RLYR_CH
GNDL_CH
+
3
M
5
4
2
1
3
5
4
2
1
1 1
22
150 C
SPEAKERTERMINAL
0.00
47/2
50
AC POWERSUPPLY CODE
(228)
2
4
5
6
1
3
2
4
5
6
1
3
12345 4
32
1
432
1
6 OHMS MIN
R-CH_GNDL-CH_GND
R-CH
+
+
ñ
ñ
L-CH
JACK PWB-B4
TERMINAL PWB-A3
POWER PWB-A2
POWER TRANSFORMER(SUB)
POWER TRANSFORMER(MAIN)
FAN MOTOR
HEADPHONES
MAIN PWB-A1(2/2)
TF
NEUTRAL
LIFE
4.7M
220K
4A12
5V
GND
VL-
VL+
VH-
VH+
D3SBA60F
RL204F
0.22
0.22
D10XB60F
0.1
0.1
4A 125V
(ML)
(ML)
DZ6.8BSA
100/
35
47K
0.1
RL204F
0.1
2A 125V
2A 125V(ML)
(ML)
10
DZ6R2BSA
1000/6.3
12K
(1/4)
(1/4
)
KTA1274 Y
100K
220/
63
2.2K
47/5
0
DZ
30B
SB
1N40
04S
1N40
04S
22/1
00
(1/4W)
(1/2W)
47
47
47K
47/5
0
82
1N40
04S
220
0.02
2
1SS
133
1K
47K
KTC3199 GR
(1/4W)
1N4004S
1N40
04S
1N4004S
1N4004S
0.04
7(M
L)
470/35
AN78L05VOLTAGE
REGULATOR3 1
2
1
2
3
4
5
6
7
8
9
10
1
2
3
4
5
6
7
8
9
10
R
L
47K
KTC3875 GR
1.5K
1.5K
DS1SS133
390
390
0.1
10
10
0
10
56K
56K
100.
13µH
3µH
(1/2
W)
(1/2
W)
L
R
R
L
RL
4.4
0.2
(2W)
(ML)
(ML)
(1/2
W)
(1/2
W)
(2W)
R1_
OU
T
L1_O
UT
KTC3203 Y
1KDS1SS133
15K
RE
LAY
10/50 68K
3.3/
25
390
8.2K
8.2K(1/2)
2.2µH(1
/2)
(1/2)
(1/2)
AC120V 60HzCN
S80
2
CN
P80
2
BI9
02
CN
P90
2
CN
S90
2
CNP971CNS971
M971(202-3)
PT841
RL841D846
C84
4
PT801
SO901
JK953
JK701CNP708FW901W
TM
901
R89
0
R841
F80
5
CN
P80
1
CN
S80
1
D802
D804
ZD802
C80
1
R802
C807
D803
F802
F804
F803
F801
C811
C810
D801
C809
C808
C806
R807
R80
6
C80
2
ZD801
C841
R80
3
R805
R80
4
Q801
R80
1
C80
4
R808
C80
3
ZD
803
D80
6
D80
5
C80
5
R844
D85
3
R85
8
C86
1
D85
6
R842
R843
Q841
D844
D84
5
D843
D842
C84
3
C842
IC854
R93
4R
935
L901
D911
C92
9R
941
R93
9
R95
6
R93
8
R94
0C
928
R946
Q905R
L914
R945
R944
R942
R943
L902
C96
0
R96
8
R965
R966
Q906
D912
C931 R950
L903
R94
7
R949NAL
6 – 5
XL-HP515
Figure 6-6 SCHEMATIC DIAGRAM (5/10)
A
B
C
D
E
F
G
H
1 2 3 4 5 6
DS
1SS
133
TA7358AP
FM FRONTEND
2 51
22 21 20
3 4
1
1 2 3
222324
65
43 2
1
6453
2
1
(CH)
(CH)
BAND PASSFILTER
(CH)
(CH)
VS
SA
OU
T
AIN
CL
DI
CE
XIN
XOU
T
RE
GAM
OS
CIN
FM
AF
C
AM
OS
CO
UT
AM
MIX
OU
T
FM
IFIN
AMLOOPANTANNA
FM
AN
TA
NN
AT
ER
MIA
NL
2
1
2
1
CHASSISGND
AM TRACKING fL
AM ANT.
AM OSC.
AM BANDCOVERAGE fL
TP
301
FM IF
FM
RF
FM OSC
FM
IF
1
2
3
321 987654321
NOTES ON SCHEMATIC DIAGRAM can be found on page 6-1
0.022
DS1SS133
DS1SS133
0.001
15P
10/
1/50 1.5K
12P
150
1K1K
47/160.022
10K
1K
4.5M
HZ
0.001
+B
+B+B
+B +B
+B
+B
LC72131
0.02
2
0.02
2
10/1
6
10.7
MHZ
5.6K
560P
22P 68K
SVC347S
10K
15P 0.047
0.022
10K
0.02
2
2.2/
50
3.9K
0.02
2
PLL(TUNER)
100P
(CH
)
10
0.02
2
0.02
2
10/16
SV
C23
0C
15P
(CH
)
0.00
1
0.0014.7P
(CH
)
100K
33K
22
0.022
4.7P
(CH
)
(UJ)
(CH
)
18P
22P
10K
0.00
10.02
2
0.01
47K
330
KTC3194 Y
4.7K100P
680
SVC230C
4.7P(CH)
0.01
470
C323
D302
D301
CN
P30
1
SO
302
C302
C382
C3
C393 R380
C381
R382
R37
3
R37
4
C384
C39
2C394C397
R38
1
R37
2
X35
2
IC302C
351
C35
0
C35
2
T3
R35
1
T303
T306C335
C334 R323
VD301
R33
6
C330 C331
C332
R36
5
C36
1
C36
2
R358
C34
2
BF301
C30
3
C305
C304
R30
2
C30
6
C34
3C307
VD
302
T301C31
0
C32
0
R31
3
D30
5
R31
1
C312
C30
8 C309
R314
T302
C31
1 VD303
C31
3
R30
9C
F30
3
C31
7
C31
6
C31
5
R325
R327
R322
Q302
C318R316
C32
4IC301
L312
R375
FM SIGNAL
AM SIGNAL
6 – 6
XL-HP515
Figure 6-7 SCHEMATIC DIAGRAM (6/10)
7 8 9 10 11 12
FM
IFD
ET
./FM
MP
X./A
MIF
2 5
21 20
3 4 6 7 8 9 10 11
1213141516171819
1 2 3 4 5 6 7 8 9 10 11 12
131415161718192021222324
D_G
ND
A_G
ND
A_+
10V
TU
N_L
TU
N_R
DI
CLK
DO
CE
TO MAIN PWB(1/2)6-3 12 - C
CONT
IFFM/A
M
FM
/AM S
D
TP
302
(1/4W)
(1/4W)
MO
/ST
STIN
D
MO/
ST
VS
SA
OU
T
AIN PD
VD
DFM
INAM
IN
DO
CL
DI
CE
IFIN
RE
G
AM
IFIN
GN
D
SD
ST
ER
EO
FM
DE
T
VC
C
IFO
UT
PH
AS
E
(FM
/AM
)P
HA
SEL-
CH
OU
T
R-C
HO
UT
MP
XIN
MP
XV
CO
FM
/AM
OU
T
VS
M
AMLO
WCU
T
AM
RF
IN
AM
OS
CIN
FM
AF
C
AM
OS
CO
UT
AM
MIX
OU
T
FM
IFIN
AM IF
1 2 3 4 5 6 7 8 9 10 11 12 13 14
1
2
3
FM
IF
TUNER PWB-C
CNP303
100P
0.01
10/50
2.2K1/50 1.5K
1K1K1K
0.00
1
47/16
10K
1K
0.02
2
0.00
1
0.00
1
100µH
22K
+B
+B
+B
+B
1K
4.7K
47K
330P
47K
31
0.02
2
0.02
2
1K 270
0.02
2
0.02
2
3.9K
2.2/50
1/50
3.3K
1/50
1K
100/
10
0.001
22P
(CH
)
10.7
MHZ
5.6K
LA18
32S
10K
0.02
2
2.2/
50
1/50
2.7K
456K
HZ
1/50
1/50
470K
1K1/
50
27P
(CH
)0.
015
0.01
5
5.6K
270
DZ5.1BSB
100/10
0.022
270
100µH
KTA1504 GR
5.6K
47/1
6
5.6K
1.8K
0.02
2
2.2/
50
0.00
1
0.02
2
R) C383
C38
5
C380
R37
9C393 R380
R37
8
R37
3
R37
4
C38
7
C38
9
C38
8
C39
2C394
R38
1
R37
2
L351
R386
R376
R360
CNS303
R395
C386
R37
7
2
C35
0
T351
CF
352
C39
9
R35
2
R35
3C
F35
1
C35
4
C35
3
R38
8
C357
C358
R355
C37
0
R39
3
C39
8
C356
C35
5
R38
7
IC30
3
R36
5
C36
1
C36
2 C36
3
C36
4
C36
6
C36
5
C36
7R
350
X35
1
C371
C372
R35
7R
356
C36
8
C36
9C
374
C37
3
R383
R391
ZD351
C396
C395
R392
L352
Q360
R38
5
C39
1
R38
4
R359
6 – 7
XL-HP515
Figure 6-8 SCHEMATIC DIAGRAM (7/10)
A
B
C
D
E
F
G
H
1 2 3 4 5 6
TAPE MECHANISM Ass'y(213)
0.047C724
KRC104 S KRA107 S
80
79
78
77
76
75
74
73
72
71
70
69
68
67
66
65
64
63
62
61
60
59
58
57
56
55
54
53
52
51 30
29
28
27
26
25
24
23
22
21
20
19
18
17
16
15
14
13
12
11
10
9
8
7
6
5
4
3
2
1
8.2K
VHP304VT
4.7K
2.7K
4.7K
0.00
10.00
1
KRC104 S KRA107 S
10K
1K
0
1K4.7K1K4.7K
1K4.7K
4.7K 1K
560
680
1K
10K
1K
MA
111
2.2K
1/50
8.2K
4.7K
47K
1.5
1K
1K
4.7K
KTA1273 Y
10K
10K
KTA1271 Y
1K 1K 1K 1K 1K
1K
MA
111
KRA102 S
150150
5.6K
2.7K
2.2K
1.5K
10K
3.9K
1K
A304BC2H
81 82 83 84 85 86 959493929190898887 10099989796
41 40 39 38 37 36 35 34 33 32 3150 49
50 49
48 47 46 45 44 43 42
VOL_JOG
3 3
11
22
CD_RESOUT
IXA020AW
12
332
1
NA-11SS55-1
3
21
VO
L_LE
D
MIC_SW
G10
P20
P19
G11
T_REC/PLAY
KE
Y2
TRAY SW1
5V BACK UP
S18(DIST 2)
S20(DIST 0)
T_BIAS
SP
DE
T
S14
VLOAD
S8
S7
S6
S5
AV
RE
F
XT2
ñ20dBATT
SP
_RLY
G10
G8
G7
G6
G5
G4
G3
G2
G1
P01
P02
P03
P04
P05
P07
P08
P09
P10
P11
P12
P13
P14
P15
P16
P17
P18
VDD
G1
G2
G3
G4
G5
G6
G7
G8
G9
PH
OT
O
VD
D
TIM
ELE
D
T_M
OT
OR
SM
UT
E
VS
S
RE
MO
CO
N
P_I
N
KE
Y0
T_RUN
TUN_SM/SPAN
AVSS
CD_DO
CD_DI
CD_CLK
DO
VPP
CD_WRQ
CD_CE
S13
S12
S4
S3
S2
S1
G11
DI
CE
RESET
AV
DD
XOUT
XIN
VDD
F2
F2
P06
NX
NX
NX
NX
NX
NP
CLAMP SW
T_S
OL PROTECT
S9S10
KE
KE
KE
S16
S17(DIST 3)
CLK
+B
+B+B
+B
+B
+B
CD_DRF
DISC SW
AC
_RLY
TRAY SW2
S19(DIST 1)
S15
S11
DIST
FPA/FPB SW
KE
Y1
NP
NX
G9
NP
NP
1
45 44 43 42 41 40 39 38 37 36 35 34 33 32 31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16 15 14 13 12 11 10 9 8 7 6 5 4 3
1
23
1
22
KEY
GND
DISC 5
DISC 4
DISC 3
OPEN/
DISC 1
DISC 2
PLAYDIRECT
CLOSE
SWITCH PWB-B2
1
2
2
1
2
1
LED PWB-B3
DISPLAY PWB-B1
GND
T_MOTORT_SOL_A
FPB
T1 RUN
FPA
7
1
456
23
7
1
456
23
6
2
3
1
4
5
FL DISPLAY
SYSTEMMICROCOMPUTER
R. RECF. REC
+MTR
ñCOM
M+
ñ
END SW
+SOL
N.C. (OP PACK)
SOLENOID
TAPEMOTOR(213-2)
TAPE MECHANISMPWB Ass'y(213-3)
VO
LUM
E
NOTES ON SCHEMATIC DIAGRAM can be found on page 6-1
CN
P70
7 R772R573
LED708
BI707C
NS
707
BI703A
CNP706B
SW728
SW725
SW726
SW722
SW723
SW724
SW727
RD
24R
D22
RD
21R
D20
RD
25R
D23
RD19
BI703B
CNP702
R566
R774
R773
Q714 Q715
R77
9
R780
R781
C71
7C71
6
VR
701
Q712 Q713
R73
2
Q701
R776
R775
Q702
D71
1
D71
2
R78
2R793
LED701
R78
4
R563R562
R565
R564
R737R736
R761
R747
R748
R77
1
R73
4R
731
R73
5
R74
6 R72
3
R72
4
R73
0
R72
9
R72
8
R72
7
R72
6
R72
5
R75
5
IC701
Q711
C70
7
R76
3
FL701
R76
6
FFC702
6 – 8
XL-HP515
Figure 6-9 SCHEMATIC DIAGRAM (8/10)
7 8 9 10 11 12
0.047C723
KRC104 S
10K
GP1UM271
30
29
28
27
26
25
24
23
22
21
20
19
18
17
16
15
14
13
12
11
10
9
8
7
6
5
4
3
2
1
K
0.00
1
10K
680
1K1K
0
220/10
0.022
1/50
1.5
820
10K
10K
10K5.6K
1K
1K
1K
10K
5.6K
1K
10K
10K
0.022
10K
15P
1K
1K
1K
1K
1K
1K
1K
1K
1K
1K
1K
1K
1K
1K
1K
KRC102 S
3.3/
50
MA111100µH MA111
100K
MA
111
0.01
47K
680
680
680 820 1K 1.5K
3.9K2.7K2.2K1.5K1K 5.6K820
0.02
2
47/16
MA
111
MA
111
100
150P
(CH
)
5 10099989796
6 35 34 33 32 31
1 2 3
VOL_JOG
CD_RESOUT
321
32
1
3
2
DISC
TRAY SW2
+5V
PAUSE
GND
PHOTO
T_REC/PLAY
KE
Y2
A_+10V
CLAMP
P_IN
AC_RLY CON
VF2
ñVF
VF1
T_BIAS
CD_CE
CD_D0
CD_D1CD_CLK
CD_RESOUT
CD_WRQ
CD_DRF
TAPEVIDEO
ñ20dB
SP_DET
DO
TUNER
CLK
CE
DI
T_BIAS
REC/PLAY
AV
RE
F
XT2
ñ20dBATT
D_GND
SP_RLY
CD
EQUALIZERX-BASS
ON/
F1
G6
G5
G4
G3
G2
G1
VDD
G1
G2
G3
G4
G5
G6
P_I
N
KE
Y0
T_RUN
TUN_SM/SPAN
AVSS
CD_DO
CD_DI
CD_CLK
DO
VPP
CD_WRQ
CD_CE
DI
CE
RESET
AV
DD
XOUT
XIN
VDD
PROTECT
+B_PROTECT
KEY 2
KEY 1
KEY 0
CLK
M_+13V
UNSW5.6+B
+B
+B
+B +B
+B
+B
+B
+B
+B
+B +B+B
+B+B
+B
+B+B
SW_5V
M_+13V
UN
_SW
5.6V
CD_DRF
S_MUTE
/AUX
TIMER/CLOCK/
/TIMEUP UPDOWN
DOWN
STOP PLAY
TUNING TUNING/TIME
MEMORY/SET/DEMO
MODEREVERSE REVERSE
PLAY
TRAY SW1
FPA/FPB SW
PRESET
PRESETSTANDBY
REC/
KE
Y1
NP
NP
F1
21
8
7
9
11
10
14
14
13
12
0 9 8 7 6 5 4 3 2 1
9
8
7
5
17
18
3
15
4
6
13
11
14
21
12
2
1
1
19
20
10
16
6
2
3
1
4
5
6
2
3
1
1
4
56-11 11 - B
CNP5
TO CD SERVO PWB
6-3 12 - F
CNP701B
TO MAIN PWB(1/2)
FFC5
REMOTESENSOR
VO
LUM
E (BAND)
(CH)
18P(CH)
4.19403MHz
CNP706A
FFC706
SW712
SW701
SW711SW710 SW713 SW718SW716 SW717SW709 SW715SW714
SW720
SW703SW702
RD18
SW721
RD16
RD17
SW719
RD08
RD01 RD02 RD03
RD14RD13RD12RD11RD10 RD15RD09
SW705SW704
RD04
RX701Q703
C71
9
D706L701 D705
R79
7
D70
7
C71
8
R79
6
C72
0 C721
D70
8
D70
9
R798
C72
2
CNP701A
CN
P70
4
R799
0
C71
7VR
701
R78
4
R785
R786
R794
R72
3
R72
4
R72
5
R75
5
R71
8R
720
R02
6
R78
9
R790
R721
C705
R717
R716
R715
R714
R713
R712
R711
R710
R709
R770
C703
XL700
C704
R708
R701
R705
R704
R702
R700
C702
C701
Q719
R795
C700
R783
R787
FFC701
6 – 9
XL-HP515
Figure 6-10 SCHEMATIC DIAGRAM (9/10)
A
B
C
D
E
F
G
H
1 2 3 4 5 6
+B
+B
+B
+B
+B
+B
+B
+B
+B
FOCUS/TRACKING/SPIN/SLED DRIVER
CD SIGNAL
680
0.1 2.2M
56K
KDS184
8.2K
15K
0.056
10K
5.6K
10K
0.22
0.01
47/25
10K
6.8K
10K
0.01
3.3/16
100P(CH)
0.01
20191817
1615
141312111098765
4321
0.0027330
0.047
LA6261
0.00
1
100/
10
100/10
KTA1271 Y
47/25
10
56K
56K
0.01
0.001
0.022
KTA1504 Y
100/
10
0.00
1
100/
10
100/
10
100
47
36 35 34 33 32 31 30 29 28
1 2 3 4 5 6 7 8 9
27 26 25 24 23 22 21 20 19
10 11 12 13 14 15 16 17 18
80 79 78 77 76
21 22 23 24 25
AV
SS
VREF
TRñ
VC
C
E
A
B
C
F
LDVR
PD
FOñ
FO+FO+
TR+TR+
TRñ
GND
GND
VR
LD
VREF
VO
4ñ
VO
4+
VO
5ñ
VO
5+
VO
6ñ
VO
6+
PG
ND
2
MU
TE
PV
CC
2
SV
CC
SG
ND
VR
EF
IN
VC
ON
T6
RE
V6
FW
D6
VC
ON
T5
RE
V5
FW
D5
VIN
4G
VIN
4
VIN
3G
VIN
3
VIN
2G
VIN
2
VIN
1G
VIN
1
RE
GO
UT
PV
CC
1
RE
GIN
PG
ND
1
VO
1ñ
VO
1+
VO
2ñ
VO
2+
VO
3ñ
VO
3+
GND
FOñ
PD
FO+
TR+
TRñ
C
F
B
A
E
GND
PUIN
SL+
SLñ
SPñ
SP+
VCC
VVDDVVSS
PC
KIS
TP
D02
PD
01S
PD
OS
LDO
TD
O
FDO
LDS
PHLPF/RFMONFEC
LDDTEINTE
TECFIN
EINVREF
DINBINCINAIN
JITTCLPF
RFEFMIN
SLCO
AVDD1
2
5
1
4
3
6
5
6
7
8
9
10
11
12
13
14
16
15
1
2
3
4
5
6
7
8
9
10
11
12
13
14
16
15
1
2
3
4
SLEDMOTOR
SPINDLEMOTOR
+
+
ñ
ñ
PICKUP-IN
M
M
6
5
2
4
1
32
5
1
4
3
66
5
2
4
1
3
0.056
6.8K
6.8K
CD MOTOR PWB-E
CD SERVO PWB-D
PICKUP UNIT(306)
NOTES ON SCHEMATIC DIAGRAM can be found on page 6-1
The numbers to are waveform numbers shown in page 5-11 12
R39
R40
C37 R57
R41
C21
C36
C35
C9
C12C6
C8R12
C5
C11
R48
R19
R49R8
R17
R10
C46
D1
C10
C39
C20
C17
C15
C47
R45
C2
C1
C3
R9
R6
R3
C38
C4
C49
Q1
R7
IC2
CNP3
CNP3A CNW3
R13
R16
C40
Q2
R14
R15
CNP1FFC1
SW1A
M1A
M2A
C43
7
85
4
1
6 – 10
XL-HP515
Figure 6-11 SCHEMATIC DIAGRAM (10/10)
7 8 9 10 11 12
+5V +B
+B
+B+B
+B
+B
+B
+B+B
+B
+B
+B
+B
+B
+B
+8V
CDDIGITAL SIGNAL
PROCESSOR
33K
4.7K
4.7K
10K
100/
10
680
680
2.2M
4.7K
S184
8.2K
15K
10K10K
0.82
µH
1K
0.22
0.04
7
100
LC78648E
6059585756555453525150494847464544434241
20191817
1615
141312111098765
4321
7
10/25
2.2K
0.0015
0.022
0.022
0.010.01
1
1
0.00
1
0.0015(ML) (ML)0.01
330/6.3
10/25
2.2K
9
8
80 79 78 77 76 75 74 73 72 71 70 69 68 67 66 65 64 63 62 61
21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40
DV
DD
AV
SS
TRAY SW2
TRAY SW1
TRññ
TR++
ñ
+CAMñ
CAM+
+5V
PHOTODISC
CLAMP
TRAY SW1
TRAY SW2
GND
+5V
PHOTO
CLAMP
DISC
GND
MO
NI4
FW
D5
VIN
4G
+8V
DGND
CD RES
A_+5V
VVDDVVSS
PC
KIS
TP
D02
PD
01M
OT
_A-/
CO
NT
4
MO
T_A
+/C
ON
T5
MO
NI3
MO
NI5
MO
_SP
EE
D/C
ON
T6
C2F
/SB
CK
DR
F*R
ES
*WR
GD
O DI
CL
CE
DV
SS DVDD
DATA
DATACK
ASDFINASDACKASLRCK
F16MOUTOUT1
F16MINIOMODE
XVDDXIN
XOUT
XVSS
LRSY
RVDD
RCHOLRVSSLCHO
LVD
DTE
ST
DO
UT
MO
NI2
MO
NI1
MO
_B+
/CO
NT
3
M0_
B-/
CO
NT
2P
U_I
N/C
ON
T1
FS
X
EF
LGF
SE
Q
DE
FE
CT
VP
BD
VS
S
AV
DD
2
SP
DO
SLD
OT
DO
FDO
LDS
PHLPF/RFMONFEC
LDDTEINTE
TECFIN
EINVREF
DINBINCINAIN
JITTCLPF
RFEFMIN
SLCO
CL
DI
DO
CE
DRF
WRQ
DGND
L-CH
AGND
R-CH
M
M
11
10
9
8
7
6
5
4
3
2
1
1
1
2
3
4
5
6
7
8
9
10
11
12
13
14
14
11
11
10
9
8
7
6
5
4
3
2
1
1
11
1
1
2
3
4
5
6
7
8
100P (CH)
(CH)(CH)
(CH)
(CH)(CH)
0.022
100P100P100P100P
100P
0.022
6.8K
6.8K
0.02
2 2.2K
2.2K
DZ3.3BSB
220
4.7K4.7K4.7K
1K1K1K
1K1K
1K
1K
270
2.2K
2.2K
4.7K
6-2 2 - D
CNS2
FROM MAIN PWB (1/2)
6-9 11 - E
CNP704
TO DISPLAY PWB
TRAYMOTOR
DISC
CLAMP
TRAY SW1
TRAY SW2
MAIN CAMMOTOR
CHANGER PWB-F
PHOTOINTERRUPTER
16.9344MHz
0.02
2
C32
C29
C31
C27
C28
C30
C33
C34
R58
R39
R40
7 R57
C36
C35
D1
C14
R13
R16
R18
R44
R42
C22
R47
R28
C13
R14
R15
C24
R25
C26C25
C23
R24
ZD1
C16
R50
R43
L1
CNP4
CN
B1
CNP5
R55
R52
R51
R36
R32R33
R35R34
R37
R38
R54
R53R21
R56
R31
R30
R20
R27R26
CNP2
C50
C48
C42C18
C44
FFC5
FFC4
IC1
R22M1
RX1
SW3
SW2
SW1
SW4
M2
XL1
C43
1211
103
7
8
9
5
42
61
6 – 11
XL-HP515
Figure 6-12 WIRING SIDE OF PWB (1/9)
A
B
C
D
E
F
G
H
1 2 3 4 5 6
R13
9C
129
C13
5R
130
R12
2
R13
4
R13
2
C13
0
R13
5
R61
2
Q60
3
R61
3
R61
5
Q60
4
R62
1
Q60
1
Q60
2
R62
0
R61
1
R90
5
R61
4
R61
0
R61
7R
616
R90
2
C90
4
R90
9C90
3 R90
1
R90
6R
904
C90
8C
907
C91
3
R90
7R
908
R90
3
R91
1
C91
0
C91
9
R92
0Q901
R92
1
Q902
R91
9
R91
8
C91
7
Q90
5 Q904
R95
6R
946
Q903
R69
1
C69
1
R61
9
R69
3
R69
0
C69
0
R69
2
R05
R64
1
R64
3
R60
9C
625 R
607
C61
1
C65
1
C65
2
C62
6R
608R64
5 C65
3
C61
2
C60
2
R64
4
R64
2
R60
6
R06
CH
AS
SIS
GN
D
CHASSISGND
CHASSISGND
CHASSISGND
C92
0
C92
3
R917
R916
Z
ZD902
C13
1
C61
0
C60
8
R136
C60
3
C13
2
C60
1
R13
8
C12
8
CNP303R603
R602
R601
C13
3
C13
4
R15
8
R137
C127
C64
0
C63
9
R61
8
C90
2
C90
6
C90
9
C90
5
R93
5
R93
4 R958
R912
IC901
D90
6
D90
5
R943
R913
R922
R942
C96
0
BI902
CNS902
RL914
C92
8
JK953
D911C929L903
R968
R94
0
R91
0
R93
8
R93
9
R94
1R94
4
R94
5
R96
6
R96
5
CN
P97
1
D90
7R94
9
R95
0
D91
2
R94
7
R93
7
C931C
925
C94
6
C90
1Q906
JK690
R60
4
R60
5
C619
C93
0
C613
C617C615
C62
1
C60
9
C60
7
C60
5
C623
C62
2
C62
0
C62
4
IC601
C61
8
C60
6
C61
4C616
CN
P90
2
SO901
CNS971
M971(202-3)
L902
L901
123456789101112
242322212019181716151413
ECB
56789101112131415161718
1
4
SUB WOOFERPRE-OUT
SPEAKERTERMINAL
VIDEO/AUXIN
RIGHT LEFT
RIG
HT
+
+ –
–
LEF
T
3
2
1
1
1
RD
BL
WH
BL
2 3 4
5
1234567891011121314
2
1
2RD
BR
FAN MOTOR
6-19 8 - EFROM TUNER PWB
CNS303MAIN PWB-A1
TERMINAL PWB-A3
BR
COLOR TABLE
RD(R)
OR
YL
GR
BL
VL
GY
WH(W)
BK
PK
BROWN
RED
ORANGE
YELLOW
GREEN
BLUE
VIOLET
GRAY
WHITE
BLACK
PINK
LG4(231)
LG2(231)
6 – 12
XL-HP515
Figure 6-13 WIRING SIDE OF PWB (2/9)
7 8 9 10 11 12
R10
6
R14
4R
143
Q10
9 R14
0Q
110
Q112R14
6
Q114Q113
Q85
1
R12
7C
123
R13
9
Q10
7
R12
3
R12
1
R13
1
R13
3 R11
9
C12
1
R12
9
R11
7
C115
C12
9
R11
0R
108
R10
7R
109
R14
7
Q10
6
Q10
5
C10
5R11
3
C109 R14
8
C10
6
C13
5
C110R15
0C
124
R12
8R
126
R13
0
R11
8
C10
4
R12
4
R12
2
R10
4R
103
R10
5R
120
C11
6
Q108
R11
2
R13
4
R13
2
C13
0
R13
5
Q60
4
R61
7R
616
R91
9C
917
CHASSISGND
CHASSISGND
BI8
02
CN
P70
1B
Q11
1
C14
0
C13
7
R14
2
R14
1
C138
BI6
01
R14
5
C13
9L103
R149
C141
D86
2
D86
0
C86
4
C85
5
IC851
C874
C856
C85
4
R85
4
R930
BI8
01
C92
0
C91
2
WT
M90
1
FW901
R917
R916 R926
R925
R927
C914
C91
6
C92
2
C918
C92
1C
915
C91
1
R92
9
R92
8
C85
9
C86
5
ZD
804
ZD
805
ZD903
ZD902
R85
3
R85
7D86
5
R86
4 R85
9
D86
1
C14
3
C13
1
C11
7
C12
5
C111
R11
5
C113
IC101
R11
6
R114 BI102
C103
C12
6
C11
2
C11
4 Q10
1
Q10
3
R111
C118
Q104Q102
C13
2
R13
8
C12
8
C13
3
C13
4
C127
C90
2
R958
R912
901
D91
0
D90
9
JK701
CNS802
CNS2
CNS801
CN
P70
8
CNS102
D86
3
R86
3
1
1 8WH
B
BCEECB C
EB
C
E
B
C
E
WH
GR
GR
GY
YL
YL
WH
WH
PK
PK
23456789101112
123456135
246
77891011
242322212019181716151413
12
34
56
78
910
1112
1314
1516
1718
1920
21
5
1
11
1
1
1
GRWHGRWHGRRD
RDWHBKWHBKWHBKWH
RD
1
9WHBKWHBKWHBKWH
RD
GR
WH
BL
GR
WH
BL
GR
WH
BL
RD
BL
WH
BL
WH
BL
WH
BL
123456
12345678
1
2
3
4
5
6
7
8
9
10
711
2345
5
HEADPHONES
TO
PO
WE
RP
WB
CN
P80
2
TO
CD
SE
RV
OP
WB
6-17
10-
G
CN
P2
6-15 11 - G
6-18
5-
H
6-20 4 - F
TO DISPLAY PWB
CNP701A
6-18
3-
GT
OP
OW
ER
PW
B
CN
P80
1
1
21 FFC701
TERMINAL PWB-A3
JACK PWB-B4
TOTAPE
MECHANISM Ass'yRECORD/PLAYBACK
/ERASE HEAD
654321
LG3(231)
LG1(231)
6 – 13
XL-HP515
Figure 6-14 WIRING SIDE OF PWB (3/9)
A
B
C
D
E
F
G
H
1 2 3 4 5 6
RD25
RD17
Q719
RD18
R770
R773R774
R566
R799RD15
RD16
D711
R77
5
R776
R731
Q71
3Q
714
Q71
2
Q715
RD13
D712
RD12
RD11
RD
10 R796
D705
Q703
R78
R
R70
4C
703
C70
4R
705
C702
R70
9
R712R713
R711R710
R708
R732
C720C722
RD24
RD23
RD22
RD21
RD20
RD19
C71
6
R02
6
C72
3
SW728
SW719
SW720
SW721
SW717
SW718
SW716
CNP702
Q70
2
Q701
RD14
SW715
SW714
SW713
SW711
SW712
RD09
C70
1L7
01
VR701
R
FFC706
FFC702
FL702
XL700
R702
R700
R701
R790
R755R720
R715
R714
R716
R717
R783R
798
C72
1
C70
0C
NP
706A
RX701
CN
P70
4
SW726
SW724
SW722
BI7
03B
BI7
03A
SW727
SW725
SW723
11 2
34
56
78
9 1
MEMORRY/SET
EQUALIZER
PRESETUP
REC/PAUSE
TUNING/TIMEUP
TAPE
VIDEO/AUX
TUNING/TIME
DOWN
X-BASS/DEMO
STOP
PLAY
1
23
45
76
B
C
E
E
C
B
7
1011
1213
14
14
1
1002
22 3
1
1
1
BR
COLOR TABLE
RD(R)
OR
YL
GR
BL
VL
GY
WH(W)
BK
PK
BROWN
RED
ORANGE
YELLOW
GREEN
BLUE
VIOLET
GRAY
WHITE
BLACK
PINK
CD DIRECTPLAY
OPEN/CROSE
DISC 1
DISC 2
DISC 3
REMOTE SENSOR
DISC 4
DISC 5
1
1
2
3
4
5
6
7
7
6-17 9 - GTO CD SERVO PWB
CNP5
FFC5
6-20 4 - C
TO TAPE MECHANISM PWB
FL DISPLAY
1 2 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19
DIS
SWITCH PWB-B2
1 2 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19
6 – 14
XL-HP515
Figure 6-15 WIRING SIDE OF PWB (4/9)
7 8 9 10 11 12
D705
Q703
R781
R789
R721
C717R780
D706
R786
R785
C718
D708
R724R723
R787
D707
R784
R725R728
D709
R797
R782
R730
R746
R772
R794
R735
R79
3
R748
RD04
RD02
RD03
RD
01
R564R565
R763
R737
R761R747
Q711
R771
R736
IC701
C705
R718
R70
4C
703
C71
6
R02
6
R573
R563
R56
2
C724
BI707
LED708
VR701
R727
R729
R779
R72
6
C719
RD
08
SW710
SW709
CNP701A
SW703
SW704
SW705
SW702
SW701
LED701
CN
P70
6B
FFC701
C70
7
R76
6
R734
CNP707
CNS707
FL702
XL700
R795
1
2
1
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
21
CD
TUNER(BAND)
CLOCK/TIMER
POWERON/
STAND-BY
TIMER
1
7
12
34
56
7
1 5
10
15
20
25
30 31
35
40
45 505155
60
65
70
75
8081
85
9095100
1 2
1 2
DISPLAY
6-13 11 - BTO MAIN PWB
CNP701B
5 16 17 18 19 20 21 28 29 30 31 32 33 34 35 36 37 38 39 40 41 44 45
PRESETDOWN
REVERSEPLAY
REVERSEMODE
DISPLAY PWB-B1
LED PWB-B3
5 16 17 18 19 20 21 28 29 30 31 32 33 34 35 36 37 38 39 40 41 44 45
3 21
6 – 15
XL-HP515
Figure 6-16 WIRING SIDE OF PWB (5/9)
A
B
C
D
E
F
G
H
1 2 3 4 5 6
FFC4
CNP3A
SW1A
M2A
M1A
CNW3
M1
CNB1
RX1
M2
SW1
SW2
SW3
SW4
123456
123456
123456
PICKUP IN
SPINDLE MOTOR
SLED MOTOR
CD MOTOR PWB-E
CHANGER PWB-F
RDWHGRWHGRWH
BR
COLOR TABLE
RD(R)
OR
YL
GR
BL
VL
GY
WH(W)
BK
PK
BROWN
RED
ORANGE
YELLOW
GREEN
BLUE
VIOLET
GRAY
WHITE
BLACK
PINK
CD P
161
161513
1411
12109
87
65
43
21
1
11
11
10
9
8
7
6
5
4
3
2
1
TRAYMOTOR
MAIN CAMMOTOR
PHOTOINTERRUPTER
DISC
CLAMP
TRAY SW1
TRAY SW2
+ +
ññ
The numbers to are waveform numbers shown in page 5-11 12
6 – 16
XL-HP515
Figure 6-17 WIRING SIDE OF PWB (6/9)
7 8 9 10 11 12
D1
C13
R55
C48
R24
R26 C44
C22
R27
R25
R43
R50
R51
C28C29C30
C31C32
C33C34C27
R21R53
R58
R52
R54
R41R40R39
C2
C49
C5
C37R57C36C35
C38
R12
IC1
C8
C6
C12
C21
C46
C4
Q1
R9
C10
C17
R49
R48R17R19
IC2
C43
CNP4
R56
R16
R20
R18R15
R13R14
R47R28
CNP5
FFC5
FFC1
C14
C23
R42
C25
L1
C24
C18
CNP2
C50
R22
C26 ZD
1
C42
C16
R31
R30
R32
R33
R34R35R36
R37
R38
R7C1CNP1
C9
C47
C3
C11
C15
C20
C39
R8
R10
R45
R44
Q2
C40
CNP3 R6
R3
XL1
1
510
152021 25
3035
40 41
4550
55 606165
7075
80
1
510
152021 25
3035
40 41
4550
55 606165
7075
80
1
5
10
15
18 19
25
20
30
3536
123456
N
E
W
N
T
E
K
CD SERVO PWB-D
CD PICKUP UNIT(307)
1
1
123456782
34
56
78
910
1112
1314
14
16
16
151314
111210
98
76
54
32
1
1
1
E C B
1
11
23
45
67
89
1011
654321
6-13 12 - DFROM MAIN PWB
6-14 3 - DTO DISPLAY PWB
CNS2
CNP704
WAVEFORM NUMBERS
IC1
5 87
4
2
1
6 9
3
10 1112
6 – 17
XL-HP515
Figure 6-18 WIRING SIDE OF PWB (7/9)
A
B
C
D
E
F
G
H
1 2 3 4 5 6
6-13 12 - GFROM MAIN PWB
6-13 12 - FFROM MAIN PWB
CNS801
CNS802
BR
COLOR TABLE
RD(R)
OR
YL
GR
BL
VL
GY
WH(W)
BK
PK
BROWN
RED
ORANGE
YELLOW
GREEN
BLUE
VIOLET
GRAY
WHITE
BLACK
PINK
RE
LAY
10
1 2 3 4 5 6
987654321
PO
WE
RT
RA
NS
FO
RM
ER
(SU
B)
T.F
.
PO
WE
RT
RA
NS
FO
RM
ER
(MA
IN)
4A 125V
1 2 3 4 5 6 7
891011121314151617
4A 125V
4A 125V
2A12
5V
2A12
5V
POWER PWB-A2
12
34
98
76
5
WH
BK
AC POWERSUPPLY CORDAC 120 V, 60 Hz
1 2 3
E C B
B C E
R85
8
C861D856
IC85
4
R841
C84
2
C841
CNP802
C80
6C
805
D853
D80
4C
807
R84
4R
802
D80
3R
801
ZD
802
D80
5Z
D80
1R
805
D80
6
R80
4
C801
R807ZD803
Q801
R80
3
C803
CNP801
C810
D80
1
C811
D80
2
C808
C809
C80
4
R808
C80
2 R80
6
Q841
D845
D844
D843
D842
R843
R842
C843
C84
4
R890
D846
F805
PT
801
F801
F802
F80
3
F80
4
PT
841
RL8
41
6 – 18
XL-HP515
Figure 6-19 WIRING SIDE OF PWB (8/9)
7 8 9 10 11 12
C35
5
R35
5
R37
4R
378
R37
3
R37
2
R359
R360
C38
7R
379
R388
R39
5
R376C386
R37
7C
392
C39
5R385
R38
3
C38
5R
380
Q360
R39
3
C35
6
C35
1
R35
3C
354
C35
0C
353
R35
2
C39
9C
366
R351
R36
5C
369
R35
0
C361
R35
6
C342
R35
7
C363
VD
301
R323
C32
3
C334
C331
R33
6
C33
0C
332
C33
5 R38
1
C39
7
C38
1C
302
C38
2C
384
C30
6
C305 C343C
304
C30
3
C315
C308
C31
7
C316
R31
6 C30
9
VD
302
R31
1
R31
3
C31
3
VD303
C31
0
R30
2
R32
2
R32
5C
324
C31
2
C31
1
R32
7
C388
CHASSISGND
FM ANNTENNATERMINAL
AM LOOPANNTENNA
GNDFM
75 OHMS
AM
IFF
MO
SC
FM IFFM RF
C37
2
C37
4
C37
3
C37
1
C383
R386
R39
1IC
302
R39
2
R384
R387
L351
C38
0L3
52
C396
C391
ZD
351
R38
2
C393
C370
C398
T351
CF352
C35
7
C35
2
CF
351
C35
8
CF
303
X351
IC30
3
C36
7
C36
2
R358
C368
T306
C364
C365
CN
S30
3
T303
D30
2
D30
1
CNP301
SO302
C39
4
X352
IC301BF301
L312
D305
R309
T301
C389
C318
C320
Q30
2
T302
R314
R37
5
C307
12
1
1
1
2 3
2
3
B
C
E
234567891011
2221201918171615141312
123456789101112
2423222120191817161514
14
TP
302
TP301
13121110987654321
13
AM TRACKING fL
AM BANDCOVERAGE fL
TO MAIN PWB6-12 6 - C
CNP303
1 2 31 2 3 4 5 6 7 8 9
TUNER PWB-C
6 – 19
XL-HP515
Figure 6-20 WIRING SIDE OF PWB (9/9)
A
B
C
D
E
F
G
H
1 2 3 4 5 6
TAPE MECHANISM Ass'y(213)
1 7
1 7
BKRD
6 1
RECORD/PLAYBACK/ERASE HEAD
6-14 4 - GTO DISPLAY PWB
CNP702
FFC702
6-13 10 - AFROM MAIN PWB
CNS102BR
COLOR TABLE
RD(R)
OR
YL
GR
BL
VL
GY
WH(W)
BK
PK
BROWN
RED
ORANGE
YELLOW
GREEN
BLUE
VIOLET
GRAY
WHITE
BLACK
PINK
SOLENOID
TAPE MOTOR(213-2)
TAPE MECHANISMPWB Ass'y(213-3)
HEAD PLATEBLOCK(213-1)
6 – 20
XL-HP515
AudioXL-HP515Service ManualXLHP515MarketE CHAPTER 7. FLOWCHART[1] TROUBLESHOOTING
1. When the CD does not function The CD section may not operate when the objective lens of the optical pickup is dirty. Clean the objective lens, and check the playback operation.When this section does not operate even after the above step is taken, check the following items.
Remove the cabinet and follow the trouble shooting instructions.
"Track skipping and/or no TOC (Table Of Contents) may be caused by build up of dust other foreign matter on the laser pickup lens. Before attemptingany adjustment make certain that the lens is clean. If not, clean it as mentioned below."
Turn the power off.
Gently clean the lens with a lens cleaning tissue and a small amount of isopropyl alcohol.
Do not touch the lens with the bare hand.
2. When a CD cannot be played
2.1. "E-CD01" is displayed.1) Check the power to IC1 (LC78648E), the presence of the clock signal (16.9344 MHz) and the status of the RESET terminal (pin 67 on IC1).
2) Does the pickup move to the PICKUP-IN Switch (SW1A) position ?
If (1) and (2) are OK, check the system microcomputer (especially the communication line with the DSP).
2.2. Pressing the CD operation key is accepted, but playback does not occur.1) Focus-HF system check
2) Tracking system check
3) Spin system check
4) PLL system check
5) Others
Parts code1. CD optical pickup Lens cleaner disc UDSKA0004AFZZ
HOW TO USE
CAUTION
Cleaning fluid
Cleaner disc
Using the brush in the cleaner cap, apply 1 or 2 drops of the cleaning fluid to thebrush on the CD cleaner disc which has the mark next to it.Place the CD cleaner disc onto the CD disc tray with the brush side down,thenpress the play button.You will hear music for about 20 seconds and the CD player will automatically stop.If it still play continuously, press the stop button.
1.
2.
3.
The CD lens cleaner should be effective for 30-50 operations, however if thebrushes become worn out earlier then please replace the cleaner disc.If the CD cleaner brushes become very wet then wipe off any excess fluid with a softcloth.Do not drink the cleaner fluid or allow it contact with the eyes. In the event of thishappening then drink and / or rinse with clean water and seek medical advice.The CD cleaner disc must not be used on car CD players or on computer CD-ROMdrives.All rights reserved. Unauthorized duplicating, broadcasting and renting this productis prohibited by law.
7 – 1
XL-HP515
Although a CD is inserted and the cover is closed, "NODISC" is displayed.
(1) Focus-HF system check.
Press the Tray1 CD Eject Button without inserting a disc, and try starting the playback operation.
Figure 1
T
FDO
TDO
StoppedCH1=500 mVDC 10:1
CH3=500 mVDC 10:1
500 ms/div(500 ms/div)
NORM:20 kS/s
1
3
=Record Length=Smoothing : ON CH1 : 0.000 V
CH2 : 0.0 VMain : 100 KZoom : 2 K
Mode : AUTOType : EDGE CH1Delay : 0.0 nsHold off : 0.2 µs
CH3 : 0.000 VCH4 : 0.00 V
BW : FULL
=Trigger==Filter= =Offset=
CH1v/DIV500 mV
1. Does the pickup move to the PICKUP-IN Switch (SW1A) posi-tion ?
No Sled motor (M2A).
Yes2. Does the focus (lens) move up and down ?(Waveform drawing Figure 1)
No Check the focus peripheral circuit.
Yes3. Is the laser lit ? No Check the laser diode driver Q1 peripheral circuit.
Yes4. Is the turntable rotating ? No Spindle motor (M1A).
When a disc is loaded, start playback operation.
1. Is focus servo activated ?(Waveform drawing Figure 2)
No Pins 7~11, 79 and 80 on IC1Check the laser diode driver Q1 peripheral circuit.
Yes2. Does DRF change from "L" to "H" ? No Is the disc rotating ? No Check the spin system.
Yes
If the disc is spinning and a HF waveform is generated, DRF will go H.
3. Is the HF waveform normal ?(Waveform drawing Figure 3)
No If the level is not normal.
Figure 2
T
FDO
DRF
TE
StoppedCH1=500 mVDC 10:1
CH2=10 VDC 10:1
CH3=1 VDC 10:1
500 ms/div(500 ms/div)
NORM:20 kS/s
1
2
3
=Record Length=Smoothing : ON CH1 : 0.000 V
CH2 : 0.0 VMain : 100 KZoom : 2 K
Mode : AUTOType : EDGE CH1Delay : 0.0 nsHold off : 0.2 µs
CH3 : 0.00 VCH4 : 0.00 V
BW : FULL
=Trigger==Filter= =Offset=-3 div -1 div 0 div +1 div +3 div
CH Position To
CH2Position0.20 div
Figure 3
Vp-p=1.0 V~1.3 V0.5 mV/div,0.5 µsec/div
7 – 2
XL-HP515
Check the TE waveform at pin 17 on IC1.
(2) Focus-HF system check.
If the waveform shown in Figure 4 appears and soon after NO DISC appears ?
Yes
The tracking servo is not activated.Check the peripheral circuits at pins 16, 17 and 22 on IC1, and FFC1.
No"Initialization" is possible, but play is not possible ?
Yes
A normal jump operation cannot be completed or the beginning of the track cannot be found.Check the around pin 22 on IC1.
No"Initialization" is not possible. Data cannot be read. Check the VCO-PLL (Pin76~80 on IC1)
system.
Figure 4
T
T
TE
DRF
StoppedCH1=10 VDC 10:1
CH2=1 VDC 10:1
100 ms/div(100 ms/div)
NORM:100 kS/s
2
1
=Record Length=Smoothing : ON CH1 : 0.0 V
CH2 : 0.00 VMain : 100 KZoom : 2 K
Mode : NORMALType : EDGE CH1Delay : 2.924 msHold off : 0.2 µs
CH3 : 0.00 VCH4 : 0.00 V
BW : FULL
=Trigger==Filter= =Offset=
(3) Spin system check.
Press the OPEN/CLOSE switch without inserting a disc, and then try starting the play operation.
1. The turntable rotates a little ?(Waveform drawing Figure 5) Yes
The spin driver circuit is OK.
No2. The turntable doesn't rotate. Check around pin 24 on IC1, pins 3 and 4 on IC2, and CNW3.
Figure 5
T
T
FDO
SPDO
StoppedCH1=200 mVDC 10:1
CH2=500 mVDC 10:1
500 ms/div1999/04/07 09:51:15
(500 ms/div)NORM:20 kS/s
2
1
=Record Length=Smoothing : ON CH1 : 0.000 V
CH2 : 0.000 VMain : 100 KZoom : 2 K
Mode : NORMALType : EDGE CH2Delay : 2.924 msHold off : 0.2 µs
CH3 : 0.00 VCH4 : 0.00 V
BW : FULL
=Trigger==Filter= =Offset=
7 – 3
XL-HP515
The HF waveform is normal and the time is displayed nor-mally, but no sound is produced. Or the sound has drop-outs.
(4) PLL system check.
When a disc is loaded, start play operation.
The HF waveform is normal, but the TOC data cannot be read.
Check the PDO waveform. (Figure 6)
Check around pins 73~78 on IC1.
Figure 6
T
FDO
PDO2
PDO1
StoppedCH1=500 mVDC 10:1
CH3=1 VDC 10:1
CH4=1 VDC 10:1
500 ms/div(500 ms/div)
NORM:20 kS/s
1
4
3
=Record Length=Smoothing : ON CH1 : 0.000 V
CH2 : 0.0 VMain : 100 KZoom : 2 K
Mode : AUTOType : EDGE CH2Delay : 0.0 nsHold off : 0.2 µs
CH3 : 0.00 VCH4 : 0.00 V
BW : FULL
=Trigger==Filter= =Offset=
CH1v/DIV500 mV
1999/04/05 17:33:17
(5) Others.
Is pin 52 (C2F) on IC1 "L" ? No There are too many error flags on a damaged disc which makes error correction impossible.
Yes1. When playing at normal speed.Check the peripheral circuit at pin 39 (DOUT) on IC1 and the waveform (Figure 7).
Check again using a known good disc.
If OK, Check the unit.
Figure 7
T
T
DOUT
StoppedCH1=2 VDC 10:1
500 ns/div1999/04/07 09:25:28
(500 ns/div)NORM:200 MS/s
1
=Record Length=Smoothing : ON CH1 : 0.00 V
CH2 : 0.00 VMain : 1 KZoom : 100
Mode : NORMALType : EDGE CH1Delay : 2.887 msHold off : 0.2 µs
CH3 : 0.00 VCH4 : 0.00 V
BW : FULL
=Trigger==Filter= =Offset=
7 – 4
XL-HP515
AudioXL-HP515Service ManualXLHP515MarketE CHAPTER 8. OTHERS[1] FUNCTION TABLE OF ICIC1 VHiLC78648E-1: CD Digital Signal Processor (LC78648E) (1/2)
In this unit, the terminal with asterisk mark (*) is (open) terminal which is not connected to the outside.
Pin No. Terminal Name Input/Output Setting in Reset Function1 AVDD1 Output — Analog power supply pin 1.2 SLCO Output — slice level con-
trol.Slice level Control output pin.
3 EFMIN Input — RF signal input pin.4 RF Output — RF signal Output pin.5 LPF Output — RF signal DC level detection LPF capacitor connection pin.6 JITTC Input — Jitter detection capacitor connection pin.7 AIN Input — A signal input pin.8 CIN Input — C signal input pin.9 BIN Input — B signal input pin.10 DIN Input — D signal input pin.11 FEC Output FE signal LPF capacitor connection pin.12* PHLPF/RFMON Output ZHI Reference supply setting terminal.13 VREF Output AVDD1/2 VREF voltage output pin.14 EIN Input — E signal input pin.15 FIN Input F signal input pin.16 TEC Output TE signal LPF capacitor connection pin.17 TE Output — TE signal output pin.18 TEIN Input — TES signal generation TE signal input pin19 LDD Output — Laser power control signal output pin.20 LDS Input — Laser power control signal input pin.21 FDO Output ADAVDD/2 Focus control output pin. D/A output.22 TDO Output ADAVDD/2 Tracking control output pin. D/A output.23 SLDO Output ADAVDD/2 Thread control output pin. D/A output.24 SPDO Output ADAVDD/2 Spindle control output pin. D/A output.25 AVSS2 — — Analog GND pin 2. Must always be connected to 0V.26 AVDD2 — — Analog power supply pin 2.27 DVDD — — Digital power supply pin.28 DVSS — — Digital GND pin 2. Must always be connected to 0V.29* VPB Output H Rough servo/phase control automatic switching monitor output pin.“H” for rough
servo and “L” for phase servo.30* DEFECT Output L Defect signal output pin.31* FSEQ Output L Synchronization signal detection output pin.
Outputs a high level when the Synchronization signal detection from the EFM sig-nal and the internally generated Synchronization signal agree.
32* EFLG Output L C1, C2 error correction monitor pin33* FSX Output L 7.35kHz Synchronization signal output pin.
CLV playback mode.34 CONT1 Input/Output Input General pur-
pose I/O pin 1.Controlled by command from the microprocessor. Any of these that are unused must be either set up as input pin ports and connected to 0V, or set up as output pin ports and left open.35 CONT2 Input/Output Input General pur-
pose I/O pin 2.36 CONT3 Input/Output Input General pur-
pose I/O pin 3.37* MONI1 Input/Output Input External deiemphasis setting pin, INternal signal monitor pin 1.Controlled by
microprocessor.38* MONI2 Output L Internal signal monitor pin 2.39* DOUT Output L Digital OUT output Pin. (EIAJ format)40 TEST Input L Test input pin. Must always be connected to 0V.41 LVDD — — Left channel
D/A converterL channel Power supply pin.
42 LCHO Output LVDD/2 L channel output supply pin.43 LRVSS — — LR channel GND pin. Must always be connected to 0V.
8 – 1
XL-HP515
IC1 VHiLC78648E-1: CD Digital Signal Processor (LC78648E) (2/2)In this unit, the terminal with asterisk mark (*) is (open) terminal which is not connected to the outside.
The same potential must be supplied to all power supply pins, i, e., AVDD1, AVDD2, XVDD, DVDD, LVDD and RVDD)
Pin No. Terminal Name Input/Output Setting in Reset Function44 RCHO Output RVDD /2 Right channel
D/A converterR channel Power supply pin.
45 RVDD — — R channel output supply pin.46 XVSS — — Digital GND pin. Must always be connected to 0V47 XOUT Output Oscillator Crystal
oscillator
Power supply for crystal oscillator.Connected for a 16.9344 MHz crystal oscillator pin.48 XIN Input Oscillator
49 XVDD — — Digital power supply pin. Must always be connected to 0V50 IOMODE Input — CONT4 to 6.MONI3~5, DRF, WRQB pin output mode switching input pin.
”L” setting: Normal output “H” setting: Nch open drain output 51 F16MIN Input — DF. DAC external clock input pin.52* OUT1 Output L General-purpose output pin 1.53* 16MOUT Output CLK
Output16.9344 MHz output port.
54 ASLRCK Input —
Anti-shock
Left/Right clock input pin.(Must be connect to 0 V when unused.)
55 ASDACK Input — Bit clock input pin.(Must be connect to 0 V when unused.)
56 ASDFIN Input — Left/Right channel data input pin.(Must be connect to 0 V when unused.)
57 LRSK Output LDigital data out-
put
Left/Right channel data output pin.58 DATACK Output L Bit clock output pin.59 DATA Output L Left/Right clock output pin.60 DVDD — — Digital power supply pin.61 DVSS — — Digital GND pin 2. Must always be connected to 0V.62 CE Input —
Microcomputer Interface
Chip enable signal input pin.63 CL Input — Data transfer clock input pin.64 DI Input — Data output pin.65 DO Output (H) Data output pin. (Try state output.) 66 WRQB Output L Interruption signal output pin.67 RESB Input — Reset input pin for LSI.
This pin must be set LOW briefly after power is first applied.68 DRF Output L Focus ON detection pin.69 C2F/SBCK Input/Output Input Error flag monitor pin, or sub code
read clock input pin.Controlled by commands from the micro-processor.
70 CONT6/SBCK Input/Output Input General-purpose I/O pin 6, or sub code read clock input pin.
Controlled by commands from the micro-processor.Any of these that are unused must be either set up as input pin ports and connected to 0V, or set up as output pin ports and left open.
71* MONI5 Output L Internal signal monitor pin 5.72* MONI4 Output L Internal signal monitor pin 4.73* MONI3 Output L Internal signal monitor pin 3.74 CONT5 Input/Output Input General pur-
pose I/O pin 5.Controlled by command from the microprocessor. Any of these that are unused must be either set up as input pin ports and connected to 0V, or set up as output pin ports and left open when unused.
75 CONT4 Input/Output Input General pur-pose I/O pin 4.
76 PDO1 Output —
PLL
Phase comparison output pin 1 to control built-in VCO.77 PDO2 Output — Phase comparison output pin 2 to control built-in VCO.78 PCKIST Input — Resistor connection pin to set current for PDO1 and 02 out-
puts.79 VVSS — — Built-in VCO GND pin. Must always be connected to 0V.80 VVDD — — Built-in VCO power supply pin.
8 – 2
XL-HP515
IC1 VHiLC78648E-1: CD Digital Signal Processor(LC78648E)1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40
80 79 78 77 76 75 74 73 72 71 70 69 68 67 66 65 64 63 62 61
60
59
58
57
56
55
54
53
52
51
50
49
48
47
46
45
44
43
42
41
AVDD1
SLCO
EFMIN
RF
LPF
JITTC
AIN
CIN
BIN
DIN
FEC
PHLPF/RFMON
VREF
EIN
FIN
TEC
TE
TEIN
LDD
LDS
FD
O
TD
O
SLD
O
SP
DO
AV
SS
AV
DD
2
DV
DD
DV
SS
VP
B
DE
FE
CT
FS
EQ
EF
LG
FS
X
CO
NT
1
CO
NT
2
CO
NT
3
MO
NI1
MO
NI2
DO
UT
TE
ST
VV
DD
VV
SS
PC
KIS
T
PD
02
PD
01
CO
NT
4
CO
NT
5
MO
NI3
MO
NI4
MO
NI5
CO
NT
6/S
BC
K
C2F
/SB
CK
DR
F
*RE
S
*WR
Q
DO
DI
CL
CE
DV
SS
DVDD
DATA
DATACK
LRSY
ASDFIN
ASDACK
ASLRCK
F16MOUT
OUT1
F16MIN
IOMODE
XVDD
XIN
XOUT
XVSS
RVDD
RCHO
LRVSS
LCHO
LVDD
LC78648E
PHLPF/RFMON
VREF
LDD
LDS
LPFRF
AINCINBINDIN
FEC
EINFIN
TECTE
TEIN
JITTC
SLCOEFMIN
PDO1PDO2
PCKISTVVDDVVSS
RVDDRCHO
LRVSSLCHOLVDD
XVDDXVSS
XINXOUT
F16MINF16MOUT
ASLRCKASDACKASDFIN
RESBTEST
IOMODE
FDOTDOSPDO
SLDO
AVDD1AVSSAVDD2
DEFECT
DRF
VPB
CONT1~6OUT1
FSEQ
CLCEDIDOWRQB
DOUT
LRSYDATACKDATA
FSXEFLGC2F
MONI1~5
DVDDDVDDDVSS
DVSS
MONITOR
VREF
APC
RF SIGNALPROCESSOR
FOCUS ERRORPROCESSOR
JITTER/DETECT
PLL
CLOCKGENERATOR
EXTERNALAUDIO IN
LPF
SLICE LEVELCONTROL
TRACKING ERRORPROCESSOR
1bit DAC
RAM
ATTENUATION
INTERPOLATIONMUTE
ERRORCORRECTION
8FS DIGITALFILTER
DEEMPHASISSERIAL
OUT
A/D
AUTOADJUST
SETVOPROCESSEROR
TRACKJUMP
CLVCAV
CONTROL
A/D
RAM
RUPTUREDEFECT
DRF
CPU I/F
FRAME SYNCDETECT,PROTECT,
INSERT,EFMDECODE
PORT
MONITOR SIGNALSELECTOR
SUBCODE DECODECRC & TEXT
AUDIO OUT
Figure 1 BLOCK DIAGRAM OF IC
8 – 3
XL-HP515
IC2 VHILA6261//-1: Focus/Tracking/Spin/Sled Driver (LA6261)In this unit, the terminal with asterisk mark (*) is (open) terminal which is not connected to the outside.
* Set power system GND to the minimum potential together with SGND
* Short-circuit three pins of power system SVSS and PVCC1 externally before use.
Pin No. Terminal Name Function1 VO3+ BTL Output pin (+) for channel 3.2 VO3- BTL Output pin (-) for channel 3.3 VO2+ BTL Output pin (+) for channel 2.4 VO2- BTL Output pin (-) for channel 2.5 VO1+ BTL Output pin (+) for channel 1.6 VO1- BTL Output pin (-) for channel 1.7 PGND1 Power GND for channels 1,2,3 and 4 (BTL).8 REGIN Regulator pin (External PNP base).9 PVCC1 Power for channels 1,2,3 and 4 (BTL). (SVCC short-crircuited)10 REGOUT Regulator pin (External PNP collector).11 VIN1 Input pin for channel 112* VIN1G Input pin for channel 1 (for gain control)13 VIN2 Input pin for channel 214* VIN2G Input pin for channel 2 (for gain control)15 VIN3 Input pin for channel 316* VIN3G Input pin for channel 3 (for gain control)17 VIN4 Input pin for channel 418* VIN4G Input pin for channel 4 (for gain control)19 FWD5 CH5 Output change pin (FWD). Logic input for bridge.20 REV5 CH5 Output change pin (REV). Logic input for bridge.21 VCONT5 Input pin for CH5 output voltage control22 FWD6 CH6 Output change pin (FWD). Logic input for bridge.23 REV6 CH6 Output change pin (REV). Logic input for bridge.24 VCONT6 Input pin for CH5 output voltage control.25 VREFIN Reference voltage input pin.26 SGND Signal system GND27 SVCC Signal system power (PVCC1 short - circuited)28 PVCC2 Power for channel 5 and 6 (H bridge).29 MUTE Input pin for BTL mute.30 PGND2 Power GND for channels 5 and 6 (H bridge).31 VO6+ H bridge Output pin (+) for channel 6.32 VO6- H bridge Output pin (-) for channel 6.33 VO5+ H bridge Output pin (+) for channel 5.34 VO5- H bridge Output pin (-) for channel 5.35 VO4+ BTL Output pin (+) for channel 4.36 VO4- BTL Output pin (-) for channel 4.
8 – 4
XL-HP515
IC2 VHILA6261//-1: Focus/Tracking/Spin/Sled Driver (LA6261)1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
36
35
34
33
32
31
30
29
28
27
26
25
24
23
22
21
20
19
+-
+-
+-
+-
+-
+-
+-
+-
+-
+-
11k
22k
1k
1k
1k
1k
11k
11k
11k
22k
22k
22k
-+
-+
Pre
Driv
eP
reD
rive
+-
+-
+-
Refcroncevoltage
DUFFER AMPFor 1/2 VCC
DUFFER AMPFor VREF
TSD
Bandgad
BTL
Mod
ese
lect
Mod
ese
lect
CH4
CH5
CH6
CH3
CH2
CH1
VOLTAGECONTROL AMP
Figure 2 BLOCK DIAGRAM OF IC
8 – 5
XL-HP515
IC601 VHiLC75341/-1: Audio Processor (LC75341)IC601 VHiLC75341/-1: Audio Processor (LC75341)
Pin No. Terminal Name Function1 DI Serial data and clock input pin for con-
trol.2 CE Chip enable pin.
Data written into an internal latch in a timing of "H" to "L".Each analog switch is activated.Data transfer enabled at "H" level.
3 VSS Ground pin.4 LOUT Bass band filter comprising
capacitor and resistor connection pin and bass/treble output pin.
5 LBASS Bass band filter comprising capacitor and resistor connection pin.
6 LTRE Treble band filter comprising capacitor and resistor connection pin.
7 LIN Volume + equaliser output pin.8 LSEL0 Input selector output pin.9-12 L4-1 Input signal pin.
Pin No. Terminal Name Function13-16 R1-4 Input signal pin.17 RSEL0 Input selector output pin.18 RIN Volume + equaliser output pin19 RTRE Treble band filter comprising capacitor
and resistor connection pin.20 RBASS Bass band filter comprising capacitor
and resistor connection pin.21 ROUT Bass band filter comprising capacitor
and resistor connection pin and bass/treble output pin.
22 VREF 0.5x VDD voltage generation block for analog ground. Capacitor of sev-eral 10µF to be connected between VREF and AWSS (VSS) as a counter-measure against power ripple.
23 VDD Supply pin24 CLK Serial data and clock input pin for con-
trol.
19 20 21
22
23
24
1
2
3
45678
9
10
11
12
13
14
15
16
1817
LVref
RVref
CONTROLCIRCUIT
CONTROLCIRCUIT
CONTROLCIRCUIT
LOU
T
LBA
SS
LIN
LSE
L0
L4
L3
L2
L1
R1
R2
R3
R4
RS
EL0
RIN
RT
RE
LTR
E
RB
AS
S
RO
UT
VREF
VDD
CLK
DI
CE
VSS
CCBINTERFACE
CD
Tuner
Tape
Video
Figure 3 BLOCK DIAGRAM OF IC
8 – 6
XL-HP515
IC701 RH-iXA020AWZZ: System Microcomputer (IXA020AW) (1/2)In this unit, the terminal with asterisk mark (*) is (open) terminal which is not connected to the outside.
Pin No. Port Name Terminal Name Input/Output Function1 VDD VDD Input (+) Power supply 5V.2 P37 -20dBATT Output -20dB Attenuator.3 P36 T BIAS Output Tape record bias control.4 P35 T_REC/PLAY Output Tape REC/PLAY control.5* P34 NO USE Output Open.6 P33 CD RESOUT Output CD reset.7 P32 CD_WRQ Input CD WRQ input.8* P31 NO USE Output Open.9* P30 NO USE Output Open.10 RESET RESET Input Reset Input.11 X2 XOUT Output Main clock output 4.19MHz.12 X1 XIN Input Main clock input 4.19MHz.13 IC(VPP) VPP — GND14* XT2 NO USE — Open15 P04 CD_DRF Input CD DRF detect.16 VDD VDD Input (+) Power supply 5V.17 P27 CLK Output CD clock.18 P26 DI Output Data output.19 P25 DO Input Data input.20 P24 CE Output CE output.21 P23 CD CE Output CD chip enable.22 P22 CD CLK Output CD Clock.23 P21 CD DI Output CD Data output.24 P20 CD DO Input CD Data input.25 AVSS AVSS — Analog ground.26 ANI7 T RUN PULS Input Tape Run Pulse detect.27 ANI6 TUN SM/SPAN Input Tuner signal meter/Span Selecetor.28 ANI5 T_FP SW Input Tape Fool Proof A & B SW.29 ANI4 PROTECT Input Power abnormal detect.30 ANI3 VOL JOG Input Volume jog input.31-33 ANI2-ANI0 KEY 2-KEY 0 Input Key input.34 AVDD AVDD Input Analog power supply 5V.35 AVREF AVREF Input Analog reference voltage 5V.36 INTP3 P_IN Input Power failure detect.37 P02 PHOTO Input 5-Changer Photo SW.38 INTP1 SP DET Input Speaker abnormal detect.39 INTP0 REMOCON Input Remocon input.40 VSS VSS — Ground voltage.41 P74 S MUTE Output System mute control.42 P73 TIMER LED Output Timer LED control.43 P72 T_SOL Output Tape solenoid control.44 P71 T_MOTOR Output Tape motor control.45 P70 VOL LED Output Volume control.46 VDD VDD Input (+) Power supply 5V.47 P127 SP RLY Output Speaker relay control.48 P126 AC RLY Output AC relay control.49* P125 RDS RST Output RDS reset.50* P124 RDS READY Input RDS ready.51* P123 RDS RDDA Input RDS data.52* P122 RDS RDCL Output RDS clock.53 P121 TRAY SW2 Input 5-Changer Tray SW2.
8 – 7
XL-HP515
IC701 RH-iXA020AWZZ: System Microcomputer (IXA020AW) (2/2)In this unit, the terminal with asterisk mark (*) is (open) terminal which is not connected to the outside.
Pin No. Port Name Terminal Name Input/Output Function54 P120 TRAY SW1 Input 5-Changer Tray SW1.55 P117 DISC SW Input 5-Changer Disc SW1.56 P116 CLAMP SW Input 5-Changer Clamp SW1.57 P115 DIST Input Destination input.58* P114 ILLU LED Output Illumination LED.59 P113 MIC SW Input Mic sw detect.60* P112 KARA_LATCH Output Karaoke latch.61* P111 NO USE Output Open.62* P110 NO USE Output Open.63* P107 NO USE Output Open.64* P106 NO USE Output Open.65* P105 NO USE Output Open.66* P104 NO USE Output Open.67* P103 NO USE Output Open.68* P102 NO USE Output Open.69 P101/FIP30 S20/DEST0 Input FL segment driver/Destination input.70 P100/FIP29 S19/DEST1 Output FL segment driver/Destination input.71 P97/FIP28 S18/DEST2 Output FL segment driver/Destination input.72 P96/FIP27 S17/DEST3 Output FL segment driver/Destination input.73-78 FIP26-FIP21 S16-S11 Output FL segment driver.79 VLOAD VLOAD Input VLOAD -35V80-89 FIP20-FIP11 S10-S1 Output FL segment driver.90-100 FIP10-FIP0 G11-G1 Output FL grid driver.
8 – 8
XL-HP515
IC701 RH-iXA020AWZZ: System Microcomputer (IXA020AW)1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81828384858687888990919293949596979899100
VDD
-20dBATT
T_BIAS
T_REC/PLAY
CD_RESOUT
CD_WRQ
RESET
XOUT
XIN
VPP
CD_DRF
VDD
CLK
DI
DO
CE
CD_CE
CD_CLK
CD_DI
CD_DO
AVSS
T_RUN PULS
TUN_SM(SPAN)
T_FP SW
PROTECT
VOL_JOG
VDD
P37
P36/BUZ
P35/PCL
P34/T12
P33/T11
P32/TO2
RESET
X2
X1
IC(VPP)
P04/XT1
VDD
P27/SCK0
P26/SO0/SB1
P25/SI0/SB0
P24/BUSY
P23/STB
P22/SCK1
P21/SO1
P20/SI1
AVSS
P17/ANI7
P16/ANI6
P15/ANI5
P14/ANI4
P13/ANI3
VLOAD
S11
S12
S13
S14
S15
S16
S18(DIST2)S19(DIST1)S20(DIST0)
KARA LATCH
MIC_SW
ILLU LED
DIST
CLAMP SW
DISC SW
TRAY SW1
TRAY SW2
RDS_RDCL
RDS_RDDA
KE
Y2
KE
Y1
KE
Y0
AV
DD
AV
RE
FP
-IN
PH
OTO
SP
_DE
T
RE
MO
CO
N
VS
S
SM
UT
E
TIM
ER
LED
T_S
OL
TM
OTO
R
VO
L_LE
DV
DD
SP
_RLY
AC
_RLY
RD
S_R
ST
RD
S_R
EA
DY
P12
/AN
I2
P11
/AN
I1
P10
/AN
I0
AV
DD
AV
RE
FP
03/IN
TP
3
P02
/INT
P2
P01
/INT
P1
P00
/INT
PO
T0
VS
S
P74
P73
P72
P71
P70
VD
D
P12
7/F
IPS
2
P12
6/F
IPS
1
P12
5/F
IPS
0
P12
4/F
IP49
FIP
0
FIP
1
FIP
2
FIP
3
FIP
4F
IP5
FIP
6
FIP
7
FIP
8
FIP
9
FIP
10
FIP
11
FIP
12
P80
/FIP
13
P81
/FIP
14P
82/F
IP15
P83
/FIP
16
P84
/FIP
17
P85
/FIP
18
P86
/FIP
19
G1
G2
G3
G4
G5
G6
G7
G8
G9
G10
G11
S1
S2
S3
S4
S5
S6
S7
S8
S9
S17(DIST3)
S10
P31/TO1
P30/TO0
XT2
P87/FIP20
VLOAD
P90/FIP21
P91/FIP22
P92/FIP23
P93/FIP24
P94/FIP25
P97/FIP28
P100/FIP29
P101/FIP30
P102/FIP31
P104/FIP33
P105/FIP34
P106/FIP35
P107/FIP36
P110/FIP37
P111/FIP38
P112/FIP39
P113/FIP40
P114/FIP41
P115/FIP42
P116/FIP43
P117/FIP44
P120/FIP45
P121/FIP46
P122/FIP47
P123/FIP48
P95/FIP26
P96/FIP27
P103/FIP32RH-iXA020AWZZ
Figure 4 BLOCK DIAGRAM OF IC
8 – 9
XL-HP515
IC851 VHIAN80T53/-1: Multi Regulator (AN80T53)Pin No.
Terminal Name Function
1 REG4 Output 5.1V power supply with a minimum peak out current of 1200mA.2 REG3 Output 13V power supply with a minimum peak out current of 1350mA.3 VCC Connected to Power supplies.4 GND Connected to the IC substrate.5 MODE 1 REG1, REG2,REG3 and REG4 outputs are turned ON when this pin is 5V.6 REG2 Output 10V power supply with a minimum peak out current of 800mA.7 REG1 Output 8.5V power supply with a minimum peak out current of 700mA.
5 2 3 4 1 7 6
Peak Current Protection,Thermal Protection,
Load Short Protection.
Out puts
-+
-+ Prc
Drive-+ Prc
Drive-+Prc
DrivePrc
Drive
ReferenceVoltage
MODE1 REG313V
REG45.1V
REG18.5V
REG210.0V
VCC GND
Figure 5 BLOCK DIAGRAM OF IC
8 – 10
XL-HP515
[2] FL DISPLAYFL701 VVKNA11SS55-1RES WMAV-
AB1
MEMORY
SURROUND
SLEEP
5 PTYI
PTY
ST
TATP
DAILY TITLECHAP
ANGLE
MHz
RDS
kHz
a
b
c
d
f
g m
er
pn
h j k
(2G~9G)
(1G)
D1a D1a
D1b
2G 3G 4G 5G 6G 7G 9G 10G
11G
8G1G
GRID ASSIGNMENT
P1
1G
D5-a
D5-bD5-c
D4-a
D4-bD4-c
D3-a
D2-aD2-bD2-c
D1-aD1-b
D1-c
D3-bD3-c
k
b
jhfmdgpenrc
k
b
jhfmdgpenrc
k
b
jhfmdgpenrc
k
b
jhfmdgpenrc
k
b
jhfmdgpenrc
k
b
jhfmdgpenrc
k
b
jhfmdgpenrc
DotDot
a a a a a a a a
(R)
k
b
jhfmdgpenrc
colcol2G 3G 4G 5G 6G 7G 8G 9G 10G 11G
P2P3P4P5P6P7P8P9P10P11P12P13P14P15P16P17P18P19
P 20
ANODE CONNECTION
4
3
2
1
A1 BANGLEMEMORY CHAP
DVDTITLE WMAV- SURROUNDVCD CD MP3 X-BASS TA
TP
DAILY
D1c
D2a D2a
D2b D2c
D3a D3a
D3b D3c
D4a D4a
D4b D4c
D5a D5a
D5b D5c
DVDVCD
MP3
CD
X-BASS
)(
(L)
PATTERN AREA
145OUTER DIMENSIONS
PIN NO.
CONNECTION
45
F2 F2 NP NP P20 P19 P18 P17 P16 P15 P14 P13 P12 P11 P10 P9 P8 P7 NX P6
44 43 42 41 40 39 38 37 36 35 34 33 32 31 30 29 28 27-22 21
PIN NO.
CONNECTION
20
P5 P4 P3 P2 P1 11G 10G 9G 8G 7G 6G 5G 4G 3G 2G 1G NP NP F1 F1
19 18 17 16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1
PIN CONNECTION
col col
Dot Dot
8 – 11
XL-HP515
—MEMO—8 – 12
XL-HP515
PARTS GUIDE
NOTE:Parts marked with “ ” are important for maintaining the safety of the set.Be sure to replace parts with specified ones for maintaining the safety and performance of the set.
MICRO COMPONENT SYSTEM
MODEL XL-HP515XL-HP515 Micro Component System consisting of XL-HP515(main unit) and CP-HP515 (speaker system).
“HOW TO ORDER REPLACEMENT PARTS”To have your order filled promptly and correctly, please furnish thefollowing information.
1. MODEL NUMBER 2. REF. No.3. PART NO. 4. DESCRIPTION
MARK: SPARE PARTS-DELIVERY SECTION
For U.S.A. onlyContact your nearest SHARP Parts Distributor to order.
For location of SHARP Parts Distributor,Please call Toll-Free;1-800-BE-SHARP
Explanation of capacitors/resistors parts codesCapacitorsVCC ....................... Ceramic typeVCK........................ Ceramic typeVCT ........................ Semiconductor typeVC • • MF ............... Cylindrical type (without lead wire)VC • • MN ............... Cylindrical type (without lead wire)VC • • TV ................ Square type (without lead wire)VC • • TQ ............... Square type (without lead wire)VC • • CY ............... Square type (without lead wire)VC • • CZ ............... Square type (without lead wire)VC • • • • • • • • • J .. The 13th character represents capacity difference.
("J" ±5%, "K" ±10%, "M" ±20%, "N" ±30%, "C" ±0.25 pF, "D" ±0.5 pF, "Z" +80-20%.)
If there are no indications for the electrolytic capacitors, error is ±20%.
ResistorsVRD ....................... Carbon-film typeVRS........................ Carbon-film typeVRN ....................... Metal-film typeVR • • MF ............... Cylindrical type (without lead wire)VR • • MN ............... Cylindrical type (without lead wire)VR • • TV ................ Square type (without lead wire)VR • • TQ ............... Square type (without lead wire)VR • • CY ............... Square type (without lead wire)VR • • CZ ............... Square type (without lead wire)VR • • • • • • • • • J .. The 13th character represents error.
("J" ±5%, "F" ±1%, "D" ±0.5%.)
If there are no indications for other parts, the resistors are ±5%carbon-film type.
CAUTION:FOR CONTINUEDPROTECTION AGAINST FIREHAZARD, REPLACE ONLY WITHSAME TYPE F801,802,805 4A, 125V/F803,804 2A, 125V FUSES.
ATTENTION:POUR ASSURERUNE LONGUE PROTECTION CONTREUN INCENDIE, REMPLACER SEULEMENTPAR UN FUSIBLE DETYPE F801,802,805 4A, 125V/F803,804 2A, 125V FUSES.
PRICERANK
DESCRIPTIONNO. PART CODE NO. PARTS CODE PRICERANK DESCRIPTION
XL-HP515
– 1 –
INTEGRATED CIRCUITS
IC1 VHILC78648E-1 J AW CD Digital Signal Proscessor,LC78648E
IC2 VHILA6261//-1 J AN Focus/Tracking/Spin/Sled Driver,LA6261
IC101 VHIAN7345K/-1 J AM Playback and Record/PlaybackAmp.,AN7345K
IC301 VHITA7358AP-1 J AG FM Front End,TA7358APIC302 VHILC72131/-1 J AP PLL (Tuner),LC72131IC303 VHILA1832S/-1 J AN FM IF Det./FM Mpx./AM IF,
LA1832SIC601 VHILC75341/-1 J AM Audio Processor,LC75341IC701 RH-IXA020AWZZ J AX System Microcomputer,
IXA020AWIC851 VHIAN80T53/-1 J AL Multi Regulator,AN80T53IC854 VHIAN78L05/-1 J AE Voltage Regulator,AN78L05IC901 VHISTK41200-1 J AY Power Amp.,STK412-000
TRANSISTORS
Q1 VSKTA1504Y/-1 J AB Silicon,PNP,KTA1504 YQ2 VSKTA1271Y/-1 J AC Silicon,PNP,KTA1271 YQ101~104 VSKTC3200GR-1 J AC Silicon,NPN,KTC3200 GRQ105~108 VSKTC3875GR-1 J AB Silicon,NPN,KTC3875 GRQ109 VSKTA1504GR-1 J AB Silicon,PNP,KTA1504 GRQ110 VSKRC104S//-1 J AC Digital,NPN,KRC104 SQ111 VSKTC3203Y/-1 J AC Silicon,NPN,KTC3203 YQ112 VSKTA1504GR-1 J AB Silicon,PNP,KTA1504 GRQ113,114 VSKRC104S//-1 J AC Digital,NPN,KRC104 SQ302 VSKTC3194Y/-1 J AD Silicon,NPN,KTC3194 YQ360 VSKTA1504GR-1 J AB Silicon,PNP,KTA1504 GRQ601~604 VSKTC3875GR-1 J AB Silicon,NPN,KTC3875 GRQ701 VSKTA1273Y/-1 J AE Silicon,PNP,KTA1273 YQ702 VSKTA1271Y/-1 J AC Silicon,PNP,KTA1271 YQ703 VSKRC102S//-1 J AB Digital,NPN,KRC102 SQ711 VSKRA102S//-1 J AB Digital,PNP,KRA102 SQ712 VSKRC104S//-1 J AC Digital,NPN,KRC104 SQ713 VSKRA107S//-1 J AB Digital,NPN,KRA107 SQ714 VSKRC104S//-1 J AC Digital,NPN,KRC104 SQ715 VSKRA107S//-1 J AB Digital,NPN,KRA107 SQ719 VSKRC104S//-1 J AC Digital,NPN,KRC104 SQ801 VSKTA1274Y/-1 J AE Silicon,PNP,KTA1274 YQ841 VSKTC3199GR-1 J AB Silicon,NPN,KTC3199 GRQ851 VSKRC104S//-1 J AC Digital,NPN,KRC104 SQ901~905 VSKTC3875GR-1 J AB Silicon,NPN,KTC3875 GRQ906 VSKTC3203Y/-1 J AC Silicon,NPN,KTC3203 Y
DIODES
D1 VHDKDS184//-1 J AB Silicon,KDS184D301,302 VHDDS1SS133-1 J AB Silicon,DS1SS133D305 VHDDS1SS133-1 J AB Silicon,DS1SS133D705~709 VHDMA111///-1 J AC Silicon,MA111D711,712 VHDMA111///-1 J AC Silicon,MA111D801 VHDD10XB60F-1 J AL Silicon,D10XB60FD802 VHDD3SBA60F-1 J AG Silicon,D3SBA60FD803,804 VHDRL204F//-1 J AC Silicon,RL204FD805,806 VHD1N4004S/-1 J AB Silicon,1N4004SD842~845 VHD1N4004S/-1 J AB Silicon,1N4004SD846 VHDDS1SS133-1 J AB Silicon,DS1SS133D853 VHD1N4004S/-1 J AB Silicon,1N4004SD856 VHDDS1SS133-1 J AB Silicon,DS1SS133D860~863 VHDDS1SS133-1 J AB Silicon,DS1SS133D865 VHDDS1SS133-1 J AB Silicon,DS1SS133D905~907 VHDDS1SS133-1 J AB Silicon,DS1SS133D909,910 VHD1N4004S/-1 J AB Silicon,1N4004SD911,912 VHDDS1SS133-1 J AB Silicon,DS1SS133LED701 VHP304VT2H3-1 J AC LED,Red,304VT2H3LED708 VHPA304BC2H-1 J AK LED,Blue,A304BC2HVD301 VHCSVC347S/-1 J AG Variable Capacitance,SVC347SVD302,303 VHCSVC230C/-1 J AD Variable Capacitance,SVC230CZD1 VHEDZ3R3BSB-1 J AB Zener,3.3V,DZ3.3BSBZD351 VHEDZ5R1BSB-1 J AC Zener,5.1V,DZ5.1BSBZD801 VHEDZ6R2BSA-1 J AB Zener,6.2V,DZ6.2BSAZD802 VHEDZ6R8BSA-1 J AC Zener,6.8V,DZ6.8BSAZD803 VHEDZ300BSB-1 J AB Zener,30V,DZ30BSBZD804 VHEDZ6R2BSA-1 J AB Zener,6.2V,DZ6.2BSAZD805 VHEDZ150BSB-1 J AB Zener,15V,DZ15BSBZD902,903 VHEDZ120BSB-1 J AB Zener,12V,DZ12BSB
FILTERS
BF301 RFILR0008AWZZ J AE Band Pass FilterCF303 RFILF0124AFZZ J AD FM IF,10.7 MHzCF351 RFILF0003AWZZ J AK FM IFCF352 RFILA0009AWZZ J AE AM IF
TRANSFORMERS
1 PT801 RTRNP0509AWZZ J BC Power (Main)1 PT841 RTRNP0483AWZZ J AL Power (Sub)
T301 RCILB0065AWZZ J AC OSC,FMT302 RCILI0017AWZZ J AB FM IFT303 RCILA0052AWZZ J AE AM AntennaT306 RCILB0067AWZZ J AD AM OSCT351 RCILI0019AWZZ J AD AM IF
COILS
L1 VP-XHR82K0000 J AC 0.82 µHL103 VP-MK331K0000 J AB 330 µH,ChokeL312 RCILR0056AWZZ J AB FM RFL351,352 VP-DH101K0000 J AB 100 µH,ChokeL701 VP-DH101K0000 J AB 100 µH,ChokeL901,902 RCILZ0024AWZZ J AC 3 µH,ChokeL903 VP-DH2R2K0000 J AB 2.2 µH,Peaking
VIBRATORS
X351 92LCRSTL1425A J AF Crystal,456 kHzX352 RCRSP0019AWZZ J AF Crystal,4.5 MHzXL1 RCRM-0047AWZZ J AE Crystal,16.9344 MHzXL700 RCRSP0003AWZZ J AH Crystal,4.19403 MHz
CAPACITORS
C1 VCEAZA1EW476M J AB 47 µF,25V,ElectrolyticC2 VCKYCY1CB103K J AA 0.01 µF,16VC3 VCEAZA1EW476M J AB 47 µF,25V,ElectrolyticC4 VCKYCY1HB102K J AA 0.001 µF,50VC5 VCKYCY1HB473K J AB 0.047 µF,50VC6 VCKYCY1CB103K J AA 0.01 µF,16VC8 VCKYCY1HB272K J AA 0.0027 µF,50VC9 RC-EZ0004AWZZ J AD 3.3 µF,16V,ElectrolyticC10 VCKYCY1HB102K J AA 0.001 µF,50VC11 VCTYPA1CX563K J AB 0.056 µF,16VC12 VCCCCY1HH101J J AA 100 pF (CH),50VC13 VCKYCY1EF223Z J AB 0.022 µF,25VC14,15 VCEAZA1AW107M J AB 100 µF,10V,ElectrolyticC16 VCEAZA0JW337M J AC 330 µF,6.3V,ElectrolyticC17 VCKYCY1HB102K J AA 0.001 µF,50VC18 VCKYPA1HF103Z J AB 0.01 µF,50VC20 VCEAZA1AW107M J AB 100 µF,10V,ElectrolyticC21 VCKYCY1CB563K J AB 0.056 µF,16VC22 VCKYCY1CB103K J AA 0.01 µF,16VC23,24 VCEAZA1EW106M J AB 10 µF,25V,ElectrolyticC25,26 VCQYKA1HM152K J AB 0.0015 µF,50V,MylarC27 VCKYCY1EF223Z J AB 0.022 µF,25VC28~32 VCCCCY1HH101J J AA 100 pF (CH),50VC33 VCKYCY1EF223Z J AB 0.022 µF,25VC34 VCCCCY1HH101J J AA 100 pF (CH),50VC35 VCKYCY1HB473K J AB 0.047 µF,50VC36 VCKYCY1CF224Z J AB 0.22 µF,16VC37 VCKYCY1CB104K J AB 0.1 µF,16VC38 VCKYCY1CB103K J AA 0.01 µF,16VC39,40 VCEAZA1AW107M J AB 100 µF,10V,ElectrolyticC42 VCKYPA1HF103Z J AB 0.01 µF,50VC43 VCKYCY1EF223Z J AB 0.022 µF,25VC44 VCKYCY1HB102K J AA 0.001 µF,50VC46 VCKYCY1CB103K J AA 0.01 µF,16VC47 VCEAZA1AW107M J AB 100 µF,10V,ElectrolyticC48,49 VCKYCY1EF223Z J AB 0.022 µF,25VC50 VCKYPA1HF223Z J AB 0.022 µF,50VC103 VCKYBT1HB181K J AA 180 pF,50VC104 VCCCCY1HH181J J AA 180 pF (CH),50VC105,106 VCKYCY1HB152K J AA 0.0015 µF,50VC109,110 VCKYCY1HB331K J AA 330 pF,50VC111,112 VCEAZA1CW107M J AC 100 µF,16V,ElectrolyticC113,114 VCTYPA1EX333K J AA 0.033 µF,25V
NO. PRICERANK DESCRIPTIONPARTS CODENO. PART CODE PRICE
RANK DESCRIPTION
XL-HP515
– 2 –
C115,116 VCKYCY1HB561K J AA 560 pF,50VC117,118 VCEAZA1EW476M J AB 47 µF,25V,ElectrolyticC121 VCKYCY1EF223Z J AB 0.022 µF,25VC123,124 VCKYCY1HB271K J AA 270 pF,50VC125,126 VCEAZA1CW226M J AC 22 µF,16V,ElectrolyticC127,128 VCTYPA1CX223K J AA 0.022 µF,16VC129,130 VCKYCY1HB332K J AA 0.0033 µF,50VC131,132 VCEAZA1EW476M J AB 47 µF,25V,ElectrolyticC133 VCEAZA1CW226M J AC 22 µF,16V,ElectrolyticC134 VCEAZA1AW227M J AC 220 µF,10V,ElectrolyticC135 VCKYCY1EF223Z J AB 0.022 µF,25VC137 VCQYKA1HM473K J AB 0.047 µF,50V,MylarC138 VCQPKA2AA822J J AA 0.0082 µF,100V,PolypropyleneC139 VCQYKA1HM393K J AB 0.039 µF,50V,MylarC140 VCEAZA1EW476M J AB 47 µF,25V,ElectrolyticC141 VCEAZA1CW107M J AC 100 µF,16V,ElectrolyticC143 VCEAZA1HW335M J AB 3.3 µF,50V,ElectrolyticC302 VCKYCY1HB102K J AA 0.001 µF,50VC303 VCCCCY1HH101J J AA 100 pF (CH),50VC304 VCKYCY1HB103K J AA 0.01 µF,50VC305 VCCCCY1HH4R7C J AA 4.7 pF (CH),50VC306 VCKYCY1EF223Z J AB 0.022 µF,25VC307 VCEAZA1CW106M J AC 10 µF,16V,ElectrolyticC308 VCCCCY1HH4R7C J AA 4.7 pF (CH),50VC309 VCKYCY1HB102K J AA 0.001 µF,50VC310 VCCCCY1HH150J J AA 15 pF (CH),50VC311 VCCCCY1HH180J J AA 18 pF (CH),50VC312 VCKYCY1EF223Z J AB 0.022 µF,25VC313 VCCCCY1HH220J J AA 22 pF (CH),50VC315 VCKYCY1HB103K J AA 0.01 µF,50VC316 VCKYCY1EF223Z J AB 0.022 µF,25VC317 VCKYCY1HB102K J AA 0.001 µF,50VC318 VCKYBT1HB101K J AA 100 pF,50VC320 VCKYBT1HB102K J AA 0.001 µF,50VC323 VCKYCY1EF223Z J AB 0.022 µF,25VC324 VCCCCY1HH4R7C J AA 4.7 pF (CH),50VC330 VCCCCY1HH150J J AA 15 pF (CH),50VC331 VCKYCY1EF473Z J AB 0.047 µF,25VC332 VCKYCY1EF223Z J AB 0.022 µF,25VC334 VCCCCY1HH220J J AA 22 pF (CH),50VC335 VCKYCY1HB561K J AA 560 pF,50VC342,343 VCKYCY1EF223Z J AB 0.022 µF,25VC350,351 VCKYCY1EF223Z J AB 0.022 µF,25VC352 VCEAZA1CW106M J AC 10 µF,16V,ElectrolyticC353,354 VCKYCY1EF223Z J AB 0.022 µF,25VC355 VCCCCY1HH220J J AA 22 pF (CH),50VC356 VCKYCY1HB102K J AA 0.001 µF,50VC357 VCEAZA1HW225M J AB 2.2 µF,50V,ElectrolyticC358 VCEAZA1HW105M J AB 1 µF,50V,ElectrolyticC361 VCKYCY1EF223Z J AB 0.022 µF,25VC362 VCEAZA1HW225M J AB 2.2 µF,50V,ElectrolyticC363 VCKYCY1EF223Z J AB 0.022 µF,25VC364 VCEAZA1HW225M J AB 2.2 µF,50V,ElectrolyticC365 VCTYPA1CX223K J AA 0.022 µF,16VC366 VCKYCY1HB102K J AA 0.001 µF,50VC367,368 VCEAZA1HW105M J AB 1 µF,50V,ElectrolyticC369 VCCCCY1HH270J J AA 27 pF (CH),50VC370~372 VCEAZA1HW105M J AB 1 µF,50V,ElectrolyticC373,374 VCTYPA1CX153K J AA 0.015 µF,16VC380 VCEAZA1HW106M J AB 10 µF,50V,ElectrolyticC381 VCCCCY1HH120J J AA 12 pF (CH),50VC382 VCCCCY1HH150J J AA 15 pF (CH),50VC383 VCKYBT1HB101K J AA 100 pF,50VC384 VCKYCY1HB102K J AA 0.001 µF,50VC385 VCKYCY1HB103K J AA 0.01 µF,50VC386 VCKYCY1HB331K J AA 330 pF,50VC387 VCKYCY1EF223Z J AB 0.022 µF,25VC388 VCKYCY1HB102K J AA 0.001 µF,50VC389 VCKYBT1HB102K J AA 0.001 µF,50VC391 VCEAZA1CW476M J AB 47 µF,16V,ElectrolyticC392 VCKYCY1HB102K J AA 0.001 µF,50VC393 VCEAZA1HW105M J AB 1 µF,50V,ElectrolyticC394 VCEAZA1CW476M J AB 47 µF,16V,ElectrolyticC395 VCKYCY1EF223Z J AB 0.022 µF,25VC396 VCEAZA1AW107M J AB 100 µF,10V,ElectrolyticC397 VCKYCY1EF223Z J AB 0.022 µF,25VC398 VCEAZA1AW107M J AB 100 µF,10V,ElectrolyticC399 VCKYCY1EF223Z J AB 0.022 µF,25VC601 VCEAZA1CW227M J AC 220 µF,16V,ElectrolyticC602 VCKYCY1EF223Z J AB 0.022 µF,25VC603 VCEAZA1CW226M J AC 22 µF,16V,ElectrolyticC605~608 VCFYFA1HA154J J AB 0.15 µF,50V,Thin Film
C609 RC-EZY105AF1H J AB 1 µF,50V,ElectrolyticC610 VCEAZA1HW105M J AB 1 µF,50V,ElectrolyticC611,612 VCKYCY1HB222K J AA 0.0022 µF,50VC613,614 VCEAZA1HW105M J AB 1 µF,50V,ElectrolyticC615,616 VCEAZA1HW475M J AB 4.7 µF,50V,ElectrolyticC617~624 VCEAZA1HW105M J AB 1 µF,50V,ElectrolyticC625,626 VCKYCY1HB222K J AA 0.0022 µF,50VC639 VCEAZA1HW225M J AB 2.2 µF,50V,ElectrolyticC640 VCEAZA1HW226M J AB 22 µF,50V,ElectrolyticC651~653 VCKYCY1HB221K J AA 220 pF,50VC690,691 VCKYCY1HB391K J AA 390 pF,50VC700 RC-EZD105AF1H J AB 1 µF,50V,ElectrolyticC701 VCEAZA1AW227M J AC 220 µF,10V,ElectrolyticC702 VCKYCY1EF223Z J AB 0.022 µF,25VC703 VCCCCY1HH150J J AA 15 pF (CH),50VC704 VCCCCY1HH180J J AA 18 pF (CH),50VC705 VCKYCY1EF223Z J AB 0.022 µF,25VC707 RC-EZD105AF1H J AB 1 µF,50V,ElectrolyticC716,717 VCKYCY1HB102K J AA 0.001 µF,50VC718 VCKYCY1HB103K J AA 0.01 µF,50VC719 RC-EZD335AF1H J AB 3.3 µF,50V,ElectrolyticC720 VCKYCY1EF223Z J AB 0.022 µF,25VC721 RC-EZD476AF1C J AC 47 µF,16V,ElectrolyticC722 VCCCCY1HH151J J AA 150 pF (CH),50VC723,724 VCKYCY1EF473Z J AB 0.047 µF,25VC801 VCEAZA1VW107M J AC 100 µF,35V,ElectrolyticC802,803 VCEAZA1HW476M J AB 47 µF,50V,ElectrolyticC804 VCEAZA1JW227M J AD 220 µF,63V,ElectrolyticC805 VCEAZA2AW226M J AC 22 µF,100V,ElectrolyticC806~809 VCQYKA1HM104K J AB 0.1 µF,50V,MylarC810,811 VCFYDA2AA224J J AD 0.22 µF,100V,Thin FilmC841 VCEAZA0JW108M J AC 1000 µF,6.3V,ElectrolyticC842 VCEAZA1VW477M J AD 470 µF,35V,ElectrolyticC843 VCQYKA1HM473K J AB 0.047 µF,50V,Mylar
1 C844 RC-KZ002LAWZZ J AC 0.0047 µF,250V,CeramicC854 VCEAZA1EW227M J AC 220 µF,25V,ElectrolyticC855 VCEAZA1HW106M J AB 10 µF,50V,ElectrolyticC856 VCEAZW1EW338M J AG 3300 µF,25V,ElectrolyticC859 VCEAZA1EW226M J AB 22 µF,25V,ElectrolyticC861 VCKZPA1HF223Z J AA 0.022 µF,50VC864,865 VCEAZA1EW226M J AB 22 µF,25V,ElectrolyticC874 VCQYKA1HM104K J AB 0.1 µF,50V,MylarC901,902 VCEAZA1HW104M J AB 0.1 µF,50V,ElectrolyticC903,904 VCKYCY1HB102K J AA 0.001 µF,50VC905,906 VCEAZA1HW226M J AB 22 µF,50V,ElectrolyticC907 VCCCCY1HH101J J AA 100 pF (CH),50VC908 VCCCCY1HH3R0C J AA 3 pF (CH),50VC909 VCQYKA1HM104K J AB 0.1 µF,50V,MylarC910 VCCCCY1HH3R0C J AA 3 pF (CH),50VC911,912 VCEAZA2AW107M J AD 100 µF,100V,ElectrolyticC913 VCCCCY1HH101J J AA 100 pF (CH),50VC914,915 VCEAZA2AW107M J AD 100 µF,100V,ElectrolyticC916 VCEAZA1HW107M J AC 100 µF,50V,ElectrolyticC917 VCKYCY1HB103K J AA 0.01 µF,50VC918 VCEAZA1HW107M J AC 100 µF,50V,ElectrolyticC919 VCKYCY1HB103K J AA 0.01 µF,50VC920 RC-EZ0027AWZZ J AN 3300 µF,63V,ElectrolyticC921,922 RC-EZ0115AWZZ J AH 4700 µF,35V,ElectrolyticC923 RC-EZ0027AWZZ J AN 3300 µF,63V,ElectrolyticC925 VCEAZA1HW476M J AB 47 µF,50V,ElectrolyticC928,929 VCQYKA1HM104K J AB 0.1 µF,50V,MylarC931 VCEAZA1HW106M J AB 10 µF,50V,ElectrolyticC946 VCEAZA1HW104M J AB 0.1 µF,50V,ElectrolyticC960 VCEAZA1EW335M J AB 3.3 µF,25V,Electrolytic
RESISTORS
VRS-CY1JB000J J AA 0 ohm,Jumper,0.8×1.55mm,GreenR026 VRS-CY1JB000J J AA 0 ohm,Jumper,0.8×1.55mm,GreenR05 VRS-CY1JB000J J AA 0 ohm,Jumper,0.8×1.55mm,GreenR06 VRS-CY1JB000J J AA 0 ohm,Jumper,0.8×1.55mm,GreenR3 VRD-ST2CD563J J AA 56 kohms,1/6WR6 VRD-ST2CD563J J AA 56 kohms,1/6WR7 VRD-ST2CD470J J AA 47 ohms,1/6WR8 VRD-ST2CD103J J AA 10 kohm,1/6WR9 VRS-CY1JB100J J AA 10 ohm,1/16WR10 VRD-ST2CD103J J AA 10 kohm,1/6WR12 VRS-CY1JB331J J AA 330 ohms,1/16WR13 VRD-ST2CD822J J AA 8.2 kohms,1/6WR14,15 VRD-ST2CD682J J AA 6.8 kohms,1/6WR16 VRD-ST2CD153J J AA 15 kohms,1/6W
PRICERANK
DESCRIPTIONNO. PART CODE NO. PARTS CODE PRICERANK DESCRIPTION
XL-HP515
– 3 –
R17 VRS-CY1JB682J J AA 6.8 kohms,1/16WR18 VRD-ST2CD102J J AA 1 kohm,1/6WR19 VRS-CY1JB562J J AA 5.6 kohms,1/16WR20 VRD-ST2CD472J J AA 4.7 kohms,1/6WR21 VRS-CY1JB472J J AA 4.7 kohms,1/16WR22 VRD-ST2CD101J J AA 100 ohm,1/6WR24,25 VRS-CY1JB222J J AA 2.2 kohms,1/16WR26,27 VRS-CY1JB103J J AA 10 kohm,1/16WR28 VRD-ST2CD222J J AA 2.2 kohms,1/6WR30,31 VRD-ST2CD222J J AA 2.2 kohms,1/6WR32~38 VRD-ST2CD102J J AA 1 kohm,1/6WR39,40 VRS-CY1JB681J J AA 680 ohms,1/16WR41 VRS-CY1JB563J J AA 56 kohms,1/16WR42 VRD-ST2EE1R0J J AA 1 ohm,1/4WR43 VRS-CY1JB221J J AA 220 ohms,1/16WR44 VRD-ST2EE1R0J J AA 1 ohm,1/4WR45 VRD-ST2CD101J J AA 100 ohm,1/6WR47 VRD-ST2CD222J J AA 2.2 kohms,1/6WR48,49 VRS-CY1JB103J J AA 10 kohm,1/16WR50~54 VRS-CY1JB472J J AA 4.7 kohms,1/16WR55 VRS-CY1JB333J J AA 33 kohms,1/16WR56 VRD-ST2CD271J J AA 270 ohms,1/6WR57 VRS-CY1JB225J J AA 2.2 Mohms,1/16WR58 VRS-CY1JB103J J AA 10 kohm,1/16WR103,104 VRS-CY1JB222J J AA 2.2 kohms,1/16WR105,106 VRS-CY1JB332J J AA 3.3 kohms,1/16WR107,108 VRS-CY1JB473J J AA 47 kohms,1/16WR109,110 VRS-CY1JB472J J AA 4.7 kohms,1/16WR111 VRD-ST2CD153J J AA 15 kohms,1/6WR112 VRS-CY1JB153J J AA 15 kohms,1/16WR113 VRS-CY1JB102J J AA 1 kohm,1/16WR114 VRD-ST2CD102J J AA 1 kohm,1/6WR115,116 VRD-ST2CD560J J AA 56 ohms,1/6WR117,118 VRS-CY1JB104J J AA 100 kohm,1/16WR119,120 VRS-CY1JB392J J AA 3.9 kohms,1/16WR121,122 VRS-CY1JB123J J AA 12 kohms,1/16WR123,124 VRS-CY1JB682J J AA 6.8 kohms,1/16WR126,127 VRS-CY1JB472J J AA 4.7 kohms,1/16WR128,129 VRS-CY1JB562J J AA 5.6 kohms,1/16WR130,131 VRS-CY1JB152J J AA 1.5 kohms,1/16WR132,133 VRS-CY1JB101J J AA 100 ohm,1/16WR134,135 VRS-CY1JB103J J AA 10 kohm,1/16WR136,137 VRD-ST2CD224J J AA 220 kohms,1/6WR138 VRD-ST2CD103J J AA 10 kohm,1/6WR139 VRS-CY1JB103J J AA 10 kohm,1/16WR140 VRS-CY1JB473J J AA 47 kohms,1/16WR141 VRD-ST2CD472J J AA 4.7 kohms,1/6WR142 VRD-RT2HD820J J AA 82 ohms,1/2WR143 VRS-CY1JB473J J AA 47 kohms,1/16WR144 VRS-CY1JB223J J AA 22 kohms,1/16WR145 VRD-ST2CD4R7J J AA 4.7 ohms,1/6WR146,147 VRS-CY1JB103J J AA 10 kohm,1/16WR148 VRS-CY1JB472J J AA 4.7 kohms,1/16WR149 VRD-ST2EE151J J AA 150 ohms,1/4WR150 VRS-CY1JB683J J AA 68 kohms,1/16WR158 VRD-ST2EE221J J AA 220 ohms,1/4WR302 VRS-CY1JB100J J AA 10 ohm,1/16WR309 VRD-ST2CD103J J AA 10 kohm,1/6WR311 VRS-CY1JB104J J AA 100 kohm,1/16WR313 VRS-CY1JB333J J AA 33 kohms,1/16WR314 VRD-ST2CD220J J AA 22 ohms,1/6WR316 VRS-CY1JB472J J AA 4.7 kohms,1/16WR322 VRS-CY1JB681J J AA 680 ohms,1/16WR323 VRS-CY1JB683J J AA 68 kohms,1/16WR325 VRS-CY1JB473J J AA 47 kohms,1/16WR327 VRS-CY1JB330J J AA 33 ohm,1/16WR336 VRS-CY1JB103J J AA 10 kohm,1/16WR350 VRS-CY1JB272J J AA 2.7 kohms,1/16WR351 VRS-CY1JB562J J AA 5.6 kohms,1/16WR352 VRS-CY1JB102J J AA 1 kohm,1/16WR353 VRS-CY1JB271J J AA 270 ohms,1/16WR355 VRS-CY1JB332J J AA 3.3 kohms,1/16WR356 VRS-CY1JB102J J AA 1 kohm,1/16WR357 VRS-CY1JB474J J AA 470 kohms,1/16WR358 VRD-ST2CD392J J AA 3.9 kohms,1/6WR359 VRS-CY1JB182J J AA 1.8 kohms,1/16WR360 VRS-CY1JB472J J AA 4.7 kohms,1/16WR365 VRS-CY1JB103J J AA 10 kohm,1/16WR372~374 VRS-CY1JB102J J AA 1 kohm,1/16WR375 VRD-ST2CD471J J AA 470 ohms,1/6WR376 VRS-CY1JB102J J AA 1 kohm,1/16WR377 VRS-CY1JB473J J AA 47 kohms,1/16W
R378 VRS-CY1JB102J J AA 1 kohm,1/16WR379 VRS-CY1JB222J J AA 2.2 kohms,1/16WR380 VRS-CY1JB152J J AA 1.5 kohms,1/16WR381 VRS-CY1JB103J J AA 10 kohm,1/16WR382 VRD-ST2EE151J J AA 150 ohms,1/4WR383 VRS-CY1JB562J J AA 5.6 kohms,1/16WR384 VRD-ST2CD562J J AA 5.6 kohms,1/6WR385 VRS-CY1JB562J J AA 5.6 kohms,1/16WR386 VRD-ST2CD223J J AA 22 kohms,1/6WR387 VRD-ST2CD562J J AA 5.6 kohms,1/6WR388 VRS-CY1JB392J J AA 3.9 kohms,1/16WR391,392 VRD-ST2EE271J J AA 270 ohms,1/4WR393 VRS-CY1JB102J J AA 1 kohm,1/16WR395 VRS-CY1JB473J J AA 47 kohms,1/16WR562~565 VRS-CY1JB472J J AA 4.7 kohm,1/16WR566 VRS-CY1JB822J J AA 8.2 kohms,1/16WR573 VRS-CY1JB151J J AA 150 ohms,1/16WR601~603 VRD-ST2CD102J J AA 1 kohm,1/6WR604,605 VRD-ST2CD103J J AA 10 kohm,1/6WR606,607 VRS-CY1JB332J J AA 3.3 kohms,1/16WR608,609 VRS-CY1JB122J J AA 1.2 kohms,1/16WR610,611 VRS-CY1JB222J J AA 2.2 kohms,1/16WR612,613 VRS-CY1JB391J J AA 390 ohms,1/16WR614~617 VRS-CY1JB222J J AA 2.2 kohms,1/16WR618 VRD-ST2CD331J J AA 330 ohms,1/6WR619 VRS-CY1JB331J J AA 330 ohms,1/16WR620,621 VRS-CY1JB223J J AA 22 kohms,1/16WR641,642 VRS-CY1JB103J J AA 10 kohm,1/16WR643,644 VRS-CY1JB682J J AA 6.8 kohms,1/16WR645 VRS-CY1JB000J J AA 0 ohm,Jumper,0.8×1.55mm,GreenR690,691 VRS-CY1JB682J J AA 6.8 kohms,1/16WR692,693 VRS-CY1JB393J J AA 39 kohms,1/16WR700~702 VRD-ST2CD102J J AA 1 kohm,1/6WR704,705 VRS-CY1JB102J J AA 1 kohm,1/16WR708~713 VRS-CY1JB102J J AA 1 kohm,1/16WR714~717 VRD-ST2CD102J J AA 1 kohm,1/6WR718 VRS-CY1JB102J J AA 1 kohm,1/16WR720 VRD-ST2CD102J J AA 1 kohm,1/6WR721 VRS-CY1JB102J J AA 1 kohm,1/16WR723~725 VRS-CY1JB102J J AA 1 kohm,1/16WR726,727 VRD-ST2CD102J J AA 1 kohm,1/6WR728 VRS-CY1JB102J J AA 1 kohm,1/16WR729 VRD-ST2CD102J J AA 1 kohm,1/6WR730 VRS-CY1JB102J J AA 1 kohm,1/16WR731 VRS-CY1JB681J J AA 680 ohms,1/16WR732 VRS-CY1JB222J J AA 2.2 kohms,1/16WR734 VRD-ST2CD561J J AA 560 ohms,1/6WR735~737 VRS-CY1JB102J J AA 1 kohm,1/16WR746,747 VRS-CY1JB102J J AA 1 kohm,1/16WR748 VRS-CY1JB000J J AA 0 ohm,Jumper,0.8×1.55mm,GreenR755 VRD-ST2CD681J J AA 680 ohms,1/6WR761 VRS-CY1JB102J J AA 1 kohm,1/16WR763 VRS-CY1JB473J J AA 47 kohms,1/16WR766 VRD-ST2EE1R5J J AA 1.5 ohms,1/4WR770 VRS-CY1JB103J J AA 10 kohm,1/16WR771 VRS-CY1JB102J J AA 1 kohm,1/16WR772 VRS-CY1JB151J J AA 150 ohms,1/16WR773 VRS-CY1JB472J J AA 4.7 kohms,1/16WR774 VRS-CY1JB822J J AA 8.2 kohms,1/16WR775,776 VRS-CY1JB103J J AA 10 kohm,1/16WR779 VRD-ST2CD472J J AA 4.7 kohms,1/6WR780 VRS-CY1JB272J J AA 2.7 kohms,1/16WR781,782 VRS-CY1JB472J J AA 4.7 kohms,1/16WR783 VRD-ST2CD103J J AA 10 kohm,1/6WR784~787 VRS-CY1JB103J J AA 10 kohm,1/16WR789 VRS-CY1JB103J J AA 10 kohm,1/16WR790 VRD-ST2CD562J J AA 5.6 kohms,1/6WR793,794 VRS-CY1JB103J J AA 10 kohm,1/16WR795 VRD-ST2EE1R5J J AA 1.5 ohms,1/4WR796 VRS-CY1JB473J J AA 47 kohms,1/16WR797 VRS-CY1JB104J J AA 100 kohm,1/16WR798 VRD-ST2CD101J J AA 100 ohm,1/6WR799 VRS-CY1JB562J J AA 5.6 kohms,1/16WR801 VRD-ST2CD104J J AA 100 kohm,1/6WR802 VRD-ST2CD473J J AA 47 kohms,1/6WR803 VRD-ST2CD123J J AA 12 kohms,1/6WR804,805 VRD-ST2EE470J J AA 47 ohms,1/4WR806 VRD-ST2CD473J J AA 47 kohms,1/6WR807 VRD-ST2EE100J J AA 10 ohm,1/4WR808 VRD-RT2HD222J J AA 2.2 kohms,1/2WR841 VRD-ST2CD224J J AA 220 kohms,1/6WR842 VRD-ST2CD102J J AA 1 kohm,1/6W
NO. PRICERANK DESCRIPTIONPARTS CODENO. PART CODE PRICE
RANK DESCRIPTION
XL-HP515
– 4 –
R843 VRD-ST2CD473J J AA 47 kohms,1/6WR844 VRD-ST2EE820J J AA 82 ohms,1/4WR853 VRD-ST2CD223J J AA 22 kohms,1/6WR854 VRD-ST2CD332J J AA 3.3 kohms,1/6WR857 VRD-ST2CD223J J AA 22 kohms,1/6WR858 VRD-ST2CD221J J AA 220 ohms,1/6WR859 VRD-ST2CD103J J AA 10 kohm,1/6WR863 VRD-RT2HD3R3J J AA 3.3 ohms,1/2WR864 VRD-ST2CD223J J AA 22 kohms,1/6WR890 RR-HZ0001AWZZ J AE 4.7 Mohms,1/2WR901,902 VRS-CY1JB563J J AA 56 kohms,1/16WR903,904 VRS-CY1JB102J J AA 1 kohm,1/16WR905,906 VRS-CY1JB561J J AA 560 ohms,1/16WR907 VRS-CY1JB563J J AA 56 kohms,1/16WR908 VRS-CY1JB102J J AA 1 kohm,1/16WR909 VRS-CY1JB333J J AA 33 kohms,1/16WR910 VRD-ST2CD102J J AA 1 kohm,1/6WR911 VRS-CY1JB563J J AA 56 kohms,1/16W
1 R912 VRG-ST2EC101J J AB 100 ohm,1/4W,FusibleR913 VRN-VV3LAR22J J AC 0.22 ohms,3WR916 VRN-VV3LAR22J J AC 0.22 ohms,3WR917 VRN-VV3LAR10J J AD 0.1 ohm,3WR918 VRS-CY1JB152J J AA 1.5 kohms,1/16WR919,920 VRS-CY1JB182J J AA 1.8 kohms,1/16WR921 VRS-CY1JB152J J AA 1.5 kohms,1/16WR922 VRN-VV3LAR10J J AD 0.1 ohm,3WR925,926 VRD-RT2HD152J J AA 1.5 kohms,1/2WR927,928 VRD-ST2EE393J J AA 39 kohms,1/4WR929,930 VRD-ST2EE473J J AA 47 kohms,1/4WR934,935 VRD-ST2CD563J J AA 56 kohms,1/6WR937 VRD-ST2CD563J J AA 56 kohms,1/6WR938~941 VRD-RT2HD100J J AA 10 ohm,1/2WR942,943 VRS-VV3DA391J J AC 390 ohms,2WR944,945 VRD-ST2CD152J J AA 1.5 kohms,1/6WR946 VRS-CY1JB473J J AA 47 kohms,1/16WR947 VRD-ST2CD153J J AA 15 kohms,1/6WR949 VRD-ST2CD102J J AA 1 kohm,1/6WR950 VRD-ST2CD683J J AA 68 kohms,1/6WR956 VRS-CY1JB000J J AA 0 ohm,Jumper,0.8×1.55mm,Green
1 R958 VRG-ST2EC101J J AB 100 ohm,1/4W,FusibleR965,966 VRD-RT2HD822J J AA 8.2 kohms,1/2WR968 VRD-RT2HD391J J AA 390 ohms,1/2WRD01 VRS-CY1JB681J J AA 680 ohms,1/16WRD02 VRS-CY1JB821J J AA 820 ohms,1/16WRD03 VRS-CY1JB102J J AA 1 kohm,1/16WRD04 VRS-CY1JB152J J AA 1.5 kohms,1/16WRD08 VRD-ST2CD681J J AA 680 ohms,1/6WRD09 VRD-ST2CD821J J AA 820 ohms,1/6WRD10 VRS-CY1JB102J J AA 1 kohm,1/16WRD11 VRS-CY1JB152J J AA 1.5 kohms,1/16WRD12 VRS-CY1JB222J J AA 2.2 kohms,1/16WRD13 VRS-CY1JB272J J AA 2.7 kohms,1/16WRD14 VRD-ST2CD392J J AA 3.9 kohms,1/6WRD15 VRS-CY1JB562J J AA 5.6 kohms,1/16WRD16 VRS-CY1JB103J J AA 10 kohm,1/16WRD17 VRS-CY1JB681J J AA 680 ohms,1/16WRD18 VRS-CY1JB821J J AA 820 ohms,1/16WRD19 VRS-CY1JB102J J AA 1 kohm,1/16WRD20 VRS-CY1JB152J J AA 1.5 kohms,1/16WRD21 VRS-CY1JB222J J AA 2.2 kohms,1/16WRD22 VRS-CY1JB272J J AA 2.7 kohms,1/16WRD23 VRS-CY1JB392J J AA 3.9 kohms,1/16WRD24 VRS-CY1JB562J J AA 5.6 kohms,1/16WRD25 VRS-CY1JB103J J AA 10 kohm,1/16W
OTHER CIRCUITRY PARTS
BI102/CNS102 QCNWN2748AWPZ J AL Connector Ass’y,8/6PinBI601/CNS2 QCNWN2750AWPZ J AG Connector Ass’y,9/8PinBI703A/B QCNWN2747AWPZ J AB Flat Wire,2PinBI707/CNS707 QCNWN2505AWZZ J AC Connector Ass’y,2/2PinBI801/CNS801 QCNWN2753AWPZ J AK Connector Ass’y,11/10PinBI802/CNS802 QCNWNA056AWPZ J AF Connector Ass’y,7/6PinBI902/CNS902 QCNWN2756AWPZ J AF Connector Ass’y,5/4PinCNB1 QCNCWZO11AWZZ J AC Socket,11PinCNP1 QCNCWYP16AWZZ J AD Socket,16PinCNP2 92LCONE8P53254 J AC Plug,8PinCNP3 92LCONE6P53253 J AC Plug,6PinCNP3A 92LCONE6P53254 J AC Plug,6PinCNP4 QCNCWZX11AWZZ J AC Socket,11PinCNP5 QCNCWZY14AWZZ J AD Socket,14Pin
CNP301 92LCONE2P5268 J AB Plug,2PinCNP303 QCNCM010PAWZZ J AD Plug,14PinCNP701A QCNCWYH21AWZZ J AE Socket,21PinCNP701B QCNCWYP21AWZZ J AD Socket,21PinCNP702 QCNCWZY07AWZZ J AC Socket,7PinCNP704 QCNCWZX14AWZZ J AD Socket,14PinCNP706A QCNCWYP07AWZZ J AC Socket,7PinCNP706B QCNCWYP07AWZZ J AC Socket,7PinCNP707 92LCONE2P53253 J AB Plug,2PinCNP708 QCNCW012EAWZZ J AC Socket,5PinCNP801 92LCONEAP5267X J AC Plug,10PinCNP802 92LCONE6P53253 J AC Plug,6PinCNP902 92LCONE4P5267X J AB Plug,4PinCNP971 92LCONE2P53253 J AB Plug,2PinCNS303 QCNCW010PAWZZ J AE Socket,14PinCNS971 QCNWNA057AWPZ J AC Connector Ass’y,2PinCNW3 QCNWN2699AWPZ J AF Connector Ass’y,6/6Pin
1 F801 QFS-D402DAWNI J AC Fuse,4A,125V1 F802 QFS-D402DAWNI J AC Fuse,4A,125V1 F803 QFS-D202DAWNI J AC Fuse,2A,125V1 F804 QFS-D202DAWNI J AC Fuse,2A,125V1 F805 QFS-D402DAWNI J AC Fuse,4A,125V
FFC1 QCNWN2700AWPZ J AE Flat Cable,16PinFFC4 QCNWN2701AWPZ J AD Flat Cable,11PinFFC5 QCNWN2741AWPZ J AE Flat Cable,14PinFFC701 QCNWN2737AWPZ J AE Flat Cable,21PinFFC702 QCNWN2740AWPZ J AD Flat Cable,7PinFFC706 QCNWNA043AWPZ J AD Flat Cable,7PinFL701 VVKNA11SS55-1 J AV FL DisplayFW901 QCNWN2746AWPZ J AC Flat Wire,5PinJK690 QSOCJ0224AWZZ J AC Jack,Video/AUXJK701 QJAKM0004AWZZ J AK Jack,HeadphonesJK953 QSOCJ0111AWZZ J AD Sub Woofer OutputM1 92LMTR5529AASY J AD Motor with Gear [Tray]M1A 92LMTR5515CASY J AS Motor with Chassis [Spindle]M2 92LMTR5529AASY J AD Motor with Gear [Main Cam]M2A 92LMTR1854BASY J AP Motor with Gear [Sled]M971(202-3) RMOTV0027AWZZ J AM Motor,Air Cooling Fan
1 RL841 RRLYD0018AWZZ J AH RelayRL914 RRLYD0016AWZZ J AH RelayRX1 VHPGP1S094HCZ J AF Photo InterrupterRX701 VHLGP1UM271-1 J AH Remote Sensor,GP1UM271SO302 QTANC0206AWZZ J AD Terminal,FM AntennaSO901 QTANA0426AWZZ J AE Terminal,SpeakerSP1 RSP-ZA009AWZZ J AZ WooferSP2 RSP-ZA009AWZZ J AZ WooferSP3 RSP-ZA010AWZZ J AR TweeterSP4 RSP-ZA010AWZZ J AR TweeterSW1 QSW-P9003AWZZ J AD Switch,Push Type [CLAMP]SW1A QSW-F9001AW01 J AD Switch,Leaf Type [PICKUP IN]SW2 QSW-P9003AWZZ J AD Switch,Push Type [TRAY SW1]SW3 QSW-P9003AWZZ J AD Switch,Push Type [TRAY SW2]SW4 QSW-P9006AWZZ J AF Switch,Push Type [DISC]SW701 QSW-K0005AWZZ J AC Switch,Key Type
[ON/STAND-BY]SW702 QSW-K0005AWZZ J AC Switch,Key Type
[CLOCK/TIMER]SW703 QSW-K0005AWZZ J AC Switch,Key Type
[REVERSE MODE]SW704 QSW-K0005AWZZ J AC Switch,Key Type
[REVERSE PLAY]SW705 QSW-K0005AWZZ J AC Switch,Key Type
[PRESET DOWN]SW709 QSW-K0005AWZZ J AC Switch,Key Type [CD]SW710 QSW-K0005AWZZ J AC Switch,Key Type
[TUNER (BAND)]SW711 QSW-K0005AWZZ J AC Switch,Key Type [VIDEO/AUX]SW712 QSW-K0005AWZZ J AC Switch,Key Type [TAPE]SW713 QSW-K0005AWZZ J AC Switch,Key Type [REC/PAUSE]SW714 QSW-K0005AWZZ J AC Switch,Key Type
[TUNING/TIME UP]SW715 QSW-K0005AWZZ J AC Switch,Key Type
[TUNING/TIME DOWN]SW716 QSW-K0005AWZZ J AC Switch,Key Type [STOP]SW717 QSW-K0005AWZZ J AC Switch,Key Type [PLAY]SW718 QSW-K0005AWZZ J AC Switch,Key Type [PRESET UP]SW719 QSW-K0005AWZZ J AC Switch,Key Type
[X-BASS/DEMO]SW720 QSW-K0005AWZZ J AC Switch,Key Type [EQUALISER]SW721 QSW-K0005AWZZ J AC Switch,Key Type
[MEMORY/SET]
PRICERANK
DESCRIPTIONNO. PART CODE NO. PARTS CODE PRICERANK DESCRIPTION
XL-HP515
143 NGERH0195AWZZ J AC Mechanism Up/Down Gear B144 NGERH0196AWZZ J AC Mechanism Clamp Switch Gear145 NGERH0198AWZZ J AB Reduction Gear A146 NGERH0199AWZZ J AB Reduction Gear B147 NGERH0200AWZZ J AB Reduction Gear C148 NGERH0201AWZZ J AB Reduction Gear D149 NGERH0202AWZZ J AB Up/Down Reduction Gear E150 NGERH0203AWZZ J AB Up/Down Reduction Gear F151 NGERH0204AWZZ J AB Tray Reduction Gear E152 NSFTT0084AWFD J AD Shaft,Main Base801 LX-BZA006AWFD J AB Screw,Special802 LX-EZ0005AWFD J AA Screw,Special803 XEBSD20P10000 J AA Screw,ø2×10mm804 XEBSD30P10000 J AA Screw,ø3×10mmM1 92LMTR5529AASY J AD Motor with Gear [Tray]M2 92LMTR5529AASY J AD Motor with Gear [Main Cam]SW1 QSW-P9003AWZZ J AD Switch,Push Type [CLAMP]SW2 QSW-P9003AWZZ J AD Switch,Push Type [TRAY SW1]SW3 QSW-P9003AWZZ J AD Switch,Push Type [TRAY SW2]SW4 QSW-P9006AWZZ J AF Switch,Push Type [DISC]
CABINET PARTS
201 CCABA5762AW01 J Front Panel Ass’y201- 1 ———— –– Front Panel201- 2 GCOVA1364AWSA J AB Indicator,Timer201- 3 GCOVA1524AWSA J AC Cover,Sensor201- 4 GCOVA1531AWSA J AG Decoration Panel,Front A201- 5 GCOVA1532AWSA J AG Decoration Panel,Front B201- 6 GCOVAA054AWSA J AG Panel,Cassette Cover201- 7 GDORF0117AWSA J AF Holder,Cassette201- 8 HBDGB1001AWSA J AD Badge,SHARP201- 9 HDECQ1111AWSA J AB Window,Cassette201-10 HDECQ1112AWSA J AD Panel,FL Display201-11 HDECQ1113AWSA J AD Indicator,Volume Knob201-12 HDECZ0034AWSA J AQ Decoration Panel,Center201-13 JKNBZ0994AWSA J AE Button,Power ON/STAND-BY201-14 JKNBZ0995AWSA J AE Button,Disc Select201-15 JKNBZ0996AWSA J AE Button,X-Bass201-16 JKNBZ0997AWSA J AF Button,Play/Stop201-17 JKNBZ0998AWSA J AF Button,Play/Rev201-18 JKNBZ0999AWSA J AE Button,Function201-19 JKNBZ1000AWSA J AE Button,Tuning/Rec201-20 MLIFP0008AWZZ J AD Damper201-21 MLOKC0015AWZZ J AC Lock Lever,Cassette201-22 MSPRD0180AWFJ J AB Spring,Cassette Lock Lever201-23 MSPRD0197AWFJ J AC Spring,Cassette Holder202 CFANB5609AW01 J AQ Fan Motor Ass’y202- 1 LANGK0434AWFW J AF Bracket,Fan Motor202- 2 NFANP0001AWZZ J AD Rotary,Fan202- 3(M971) RMOTV0027AWZZ J AM Motor,Air Cooling Fan202- 4 92LCSPR1431C J AA Spring,Ring203 92LCSPR1431C J AA Spring,Ring204 GCAB-3100AWSA J AW Cabinet205 GCOVA1525AWSC J AF CD Tray Cover210 GITAR1269AWSA J AM Rear Panel,Bottom211 GITARA138AWSA J AK Rear Panel,Top212 JKNBK0104AWSA J AK Knob,VOLUME213 KMECBA003AWZZ J BC Tape Mechanism Ass’y213- 1 ———— J –– Head Plate Block213- 2 ———— J –– Motor with Pulley213- 3 ———— J –– Tape Mechanism PWB Ass’y213- 4 92PF522-063 J AZ Clutch Ass’y Block213- 5 ———— J –– Belt,Main213- 6 92PF514-133 J AL Pinch Roller Block,Right213- 7 92PF514-134 J AL Pinch Roller Block,Left213- 8 ———— J –– Belt,FF/REW214 LANGT0042AWFW J AC Bracket,PWB Suport215 LBND-1011AWZZ J AA Nylon Band216 LBSHC0005AWZZ J AD Bushing,AC Power Supply Cord217 LCHSM0197AWFW J AP Chassis,Main218 LCHSZ0026AWZZ J AM Chassis,Changer Unit219 LHLDZ9023AWZZ J AD Holder,FL Display220 PCUSG0022AWZZ J AB Cushion,Leg221 PRDARA019AWFW J AV Heat Sink,Main223 PSHEPA003AWZZ J AH Dust Sheet224 PSHEPA004AWZZ J AE Edge Light Sheet225 PSHEZA012AWZZ J AK Shield Sheet,Power PWB226 PSHEZA013AWZZ J AF Shield Sheet,Main PWB
1 228 QACCD0022AWZZ J AM AC Power Supply Cord229 QCNWN1860AWZZ J AC Lead Wire with Lug
– 5 –
SW722 QSW-K0005AWZZ J AC Switch,Key Type[DIRECT PLAY]
SW723 QSW-K0005AWZZ J AC Switch,Key Type [DISC 1]SW724 QSW-K0005AWZZ J AC Switch,Key Type [DISC 2]SW725 QSW-K0005AWZZ J AC Switch,Key Type [DISC 3]SW726 QSW-K0005AWZZ J AC Switch,Key Type [DISC 4]SW727 QSW-K0005AWZZ J AC Switch,Key Type [DISC 5]SW728 QSW-K0005AWZZ J AC Switch,Key Type
[OPEN/CLOSE]VR701 QSW-ZA002AWZZ J AF Switch,Rotary Type [VOLUME]WTM901 QCNCW019EAWZZ J AB Socket,5Pin
CD MECHANISM PARTS
301 NGERH0011AWZZ J AC Gear,Middle302 NGERH0012AWZZ J AC Gear,Drive304 NSFTM0020AWFW J AD Shaft,Guide305 92LMCUSN1524A J AD Cushion
1 306 92LHPC1LFASY J BB Pickup Unit Ass’y306- 1 ———— –– Pickup Unit
(Not Replacement Item)306- 2 NGERR0043AFZZ J AC Gear,Rack306- 3 MSPRC0961AFZZ J AA Spring,Rack307 PCUSG0001AWSA J AD Cushion308 PCUSG0004AWSA J AD Cushion701 XBSSD26P06000 J AA Screw,ø2.6×6mm703 XBBSD20P03000 J AA Screw,ø2×3mm704 LX-WZ1070AFZZ J AA Washer,ø1.5×ø3.8×0.25mmM1A 92LMTR5515CASY J AS Motor with Chassis [Spindle]M2A 92LMTR1854BASY J AP Motor with Gear [Sled]SW4 QSW-F9001AW01 J AD Switch,Leaf Type [Pickup In]
CHANGER MECHANISM PARTS
101 GCOVA1513AWZZ J AF Disc Tray102 GCOVA1514AWZZ J AF Guide Tray103 LANGG0008AWZZ J AD Outer Tray Guide104 LANGG0009AWZZ J AC Inner Tray Guide105 LCHSM0194AWZZ J AP Main Base106 LHLDZ9017AWZZ J AF CD Mechanism Holder107 LPLTP0014AWZZ J AK Top Plate108 LPLTP0015AWZZ J AG Gear Plate109 MHOLD5529ASY J AP Up/Down Holder Ass’y109- 1 LHLDM9001AWZZ J AD Stabilizer109- 2 LHLDZ9019AWM1 J AK Up/Down Holder Ass’y109- 3 LPLTM0017AWZZ J AB Stabilizer Plate109- 4 LPLTMA001AWFW J AC Plate109- 5 PMAGF0003AWZZ J AF Magnet110 MLEVP0129AWZZ J AC Tray Lock Lever111 MLEVP0130AWZZ J AG Gear Up/Down Board112 MLEVP0131AWZZ J AD Mechanism Up/Down Board (L)113 MLEVP0132AWZZ J AD Mechanism Up/Down Board (R)114 MLEVP0133AWZZ J AC Mechanism Clamp Board115 MLEVP0134AWZZ J AD L/R Joint Lever116 MLEVP0135AWZZ J AC Tray Set Lever117 MLEVP0136AWZZ J AC Mechanism Clamp Switch Lever118 MLEVP0137AWZZ J AC Mechanism Clamp Switch Arm119 MLEVP0138AWZZ J AB Inner Gear Up/Down Lever120 MLEVP0139AWZZ J AC Outer Gear Up/Down Lever121 MSPRC0044AWFJ J AB Shift Spring122 MSPRD0191AWFJ J AC Disc Stop Spring123 MSPRD0192AWFJ J AB Balance Spring124 NGERH0176AWZZ J AF Tray Big Gear125 NGERH0177AWZZ J AC Tray Front Gear A126 NGERH0178AWZZ J AC Tray Front Gear B127 NGERH0179AWZZ J AC Tray Rear Gear A128 NGERH0180AWZZ J AB Tray Rear Gear B129 NGERH0181AWZZ J AC Mechanism Clamp Gear A130 NGERH0182AWZZ J AC Mechanism Clamp Joint Gear131 NGERH0183AWZZ J AC Mechanism Clamp Board Gear132 NGERH0184AWZZ J AC Tray Rear Joint Gear A133 NGERH0185AWZZ J AC Tray Rear Joint Gear B134 NGERH0186AWZZ J AC Tray Rear Joint Gear C135 NGERH0187AWZZ J AB Tray Rear Drive Gear136 NGERH0188AWZZ J AC Tray Drive Gear137 NGERH0189AWZZ J AB Tray Front Drive Gear138 NGERH0190AWZZ J AC Tray Front Joint Gear139 NGERH0191AWZZ J AE Mode Big Gear140 NGERH0192AWZZ J AC G-Up/Down Gear A141 NGERH0193AWZZ J AC G-Up/Down Gear B142 NGERH0194AWZZ J AB Mechanism Up/Down Gear A
NO. PART CODE PRICERANK DESCRIPTION
XL-HP515
– 6 –
1 230 QFSHD0001AWZZ J AB Holder,Fuse231 QLUGP0001AWZZ J AC Lug (LG1~4)232 92LNBAND1318A J AA Nylon Band,80mm602 LX-JZ0037AWFD J AB Screw,ø3×10mm603 LX-JZ0022AFFD J AA Screw,ø3×10mm604 LX-JZ0036AWFD J AB Screw,Special605 LX-JZ0037AWFD J AB Screw,ø3×12mm606 LX-LZ0002AW00 J AC Snap Rivet,Main PWB607 LX-LZA003AWZZ J AC Snap Rivet,Power PWB608 XBBSD20P04000 J AA Screw,ø2×4mm609 XEBSD26P08000 J AA Screw,ø2.6×8mm610 XEBSD30P10000 J AA Screw,ø3×10mm611 XESSD30P10000 J AA Screw,ø3×10mm612 XHBSD30P06000 J AA Screw,ø3×6mm613 XHBSD40P06000 J AA Screw,ø4×6mm614 XJBSD30P08000 J AA Screw,ø3×8mm615 XJBSD30P10000 J AA Screw,ø3×10mm616 XJBSF30P08000 J AA Screw,ø3×8mm617 XJSSD30P10000 J AA Screw,ø3×10mm
SPEAKER BOX PARTS
901 GBOXSA034AWSA J BG Speaker Box Ass’y902 CWAKPA002AW02 J AS Net Frame Ass’y903 HPNLSA010AWSA J AT Front Panel904 LHLDZ8002AWSA J AG Catching Holder905 PCUSG0147AWZZ J AC Cushion,Foot906 TSPC-A127AWZZ J Label,Specification907 XMTZD35P14000 J AC Screw,ø3.5×14mm908 XMBZD35P16000 J AC Screw,ø3.5×16mmSP1,2 RSP-ZA009AWZZ J AZ WooferSP3,4 RSP-ZA010AWZZ J AR Tweeter
ACCESSORIES
QANTL0005AWZZ J AG AM Loop AntennaTINSEA050AWZZ J AE Operation ManualTINSZA062AWZZ J AD Quick Guide92LFANT1746A J AD FM AntennaRRMCG0408AWSA J AS Remote ControlGFTAB1049AWSA J AE Battery Lid,Remote Control
P.W.B. ASSEMBLY (Not Replacement Item)
1 PWB-A1~3 92LPWB5609MANS J –– Main/Power/TerminalPWB-B1~4 92LPWB5609DPLS J –– Display/Switch/Led/JackPWB-C 92LPWB5609TUNS J –– TunerPWB-D 92LPWB5529CDUS J –– CD ServoPWB-E QPWBF0027AWZZ J AD CD Motor (PWB Only)PWB-F QPWBF1055AWZZ J AE CD Changer Motor (PWB Only)
OTHER SERVICE PARTS
UDSKA0004AFZZ J AZ CD Optical Pickup Lens CleanerDisc
XL-HP515
A
B
C
D
E
F
G
H
1 2 3 4 5 6
Figure 7 CD MECHANISM EXPLODED VIEW– 7 –
701304
701
302
301
M1A
703x2
305x2
SW4
M2A
308
PWB-D
306-2306
704
307
306-1
306-3
XL-HP515
A
B
C
D
E
F
G
H
1 2 3 4 5 6
Figure 8 CD CHANGER MECHANISM EXPLODED VIEW– 8 –
M1
SW1SW2SW3
SW4
M2
CDMECHANISMUNIT
107
122
101x2
101x3 115
123
108
135
136111
103
119802x4
110
120
137
136
124
138
126
125149
150
141 140 127132
134
133
143
152
142 129
152
117
121130
131
113
146 145
106
114
116
109
109-2
109-3
109-5
109-4
109-1
148
105
147
144
118
128
151
146
804
148 147 145
803
801x2
803
139
104
112
803x4
803x2
102x5
PWB-F
XL-HP515
A
B
C
D
E
F
G
H
1 2 3 4 5 6
Figure 9 CABINET EXPLODED VIEW– 9 –
������yyyyyy
�y
B
B
A
A
FF/REWClutch
FF/REWBelt
MainBelt
Flywheel
BELT CONNECTION
Motor
Flywheel
CD CHANGERMECHANISM UNIT
SiliconGrease
(M971)
FAN POSITION.CAUTION : RING SPRING ASSY.INTO
FAN RIB
RING GAP
FAN RIB
RING GAP
MOTOR.AFTER FULLY INSERTED THE FAN TO CAUTION : MUST VISUAL CHECK
OK NG
MOTOR BRACKET.GAP IS 4.9 mm BETWEEN FAN AND FAN
( FOR REFERENCE ONLY )
4.9m
m
FAN MOTOR BRACKET.FAN BLADE PWB-D
611x4
201
212 203
229
609
603 213
229
604608x2
202
202-1
202-2
202-3202-4
605x2
205x5
218
223
204
610x2
614x5
614x2
614x9
612
221
607
614x2 230x4
231x2
231x2
230x6
225
220x2
220x2
201-1201-4
201-8
201-10
201-11
201-5
201-7
201-6201-9
201-23
201-20
201-22
201-21
201-15
201-16201-3
201-14
201-19
201-17
201-2201-13
201-18x2
201-12
617x2
217215232
216228
613x4
615x2
210
211
214
214226
219
224
606
616x2
602x2
609x2
609x6
614
614
614
612
614x2
610
610
610x2
610x2
610
PWB-B1PWB-B2
PWB-B3
PWB-C
PWB-A1
PWB-B4
PWB-A3213-1213-2213-3213-4213-5213-6213-7213-8
PWB-A2
Note: Only the unit and consumable parts are supplied as parts supply for the Tape mechanism.
XL-HP515
– 10 –
A
B
C
D
E
F
G
H
1 2 3 4 5 6
Figure 10 SPEAKER EXPLODED VIEW
Capacitor
TWEETERSP3(L-CH)SP4(R-CH)
WOOFERSP1(L-CH)SP2(R-CH)
BK BK
BK
REDBLUE
TWEETERSP3(L-CH)SP4(R-CH)
WOOFERSP1(L-CH)SP2(R-CH)
Capacitor2.7µF,100V
903
902904x2
904x2
908x2
907x2
SP1, SP2
SP3, SP4
907x4
905x4
901
906
908x2
XL-HP515
PACKING METHOD (FOR U.S.A. ONLY)Setting position of switches and knobs
Tape Mechanism STOP
UNIT Front Speaker(L/R)
Bottom
A
B
B
A
: Not Replacement Item
Label,Energy StarTLABZA113AWSA Packing Add.,Unit,Left/Right
SPAKAA011AWZZ
Polyethylene Bag,UnitSSAKH0094AWZZ
Polyethylene Bag,SpeakerSSAKH0099AWZZ
Sheet,SpeakerSPAKZA012AWZZ
Packing,Add.,Front Speaker,Top/Bottom
SPAKAA015AWZZ
Packing CaseSPAKCA114AWZZ
Polyethylene Bag,Accessories92LBAG1460C1
AM LoopAntenna
FM Antenna Remote Control
Operation ManualQuic Guide
Label,PopTLABZA024AWZZ
Pad,Add.,SPAKZA050AWZZ
– 11 –
XL-HP515
— M E M O —
– 12 –
XL-HP515
COPYRIGHT 2004 BY SHARP CORPORATION
ALL RIGHTS RESERVED.
No part of this publication may be reproduced,stored in a retrieval system, or transmitted inany form or by any means, electronic, mechanical,photocopying, recording, or otherwise, withoutprior written permission of the publisher.
©
A0404-1447SS•HA•M SC
SHARP CORPORATIONAV Systems GroupQuality & Reliability Control CenterHigashihiroshima, Hiroshima 739-0192, Japan
Printed in Japan