wool slayer 1
TRANSCRIPT
-
8/22/2019 Wool Slayer 1
1/8
Woolslayer Companies Inc. (WCI) is a top name in the globalpetroleum industry and is recognized as a pioneer in the design and fabrication
of innovative masts, derricks and a variety of drilling technology. Equipment
manufactured by WCI is on top of the job for virtually every major drilling
company, and is used throughout the world in every conceivable drilling
condition, both onshore and offshore.
A Legendary HeritageWCI traces its heritage to 1907 and the legendary Lee C. Moore
Corporation (LCM). In 1936, H.J. Woolslayer, an innovator in the design and
engineering of oilfield equipment, became a partner in LCM, and a few years later its
sole owner.
In 1938 LCM revolutionized the petroleum industry, when it designed and
built the first Cantilever mast, a structure that could be easily assembled by the
drilling crew, strung up on the ground, and raised to drilling position without
special equipment or requiring the services of rig builders. It could also be moved
quickly from one location to another, which greatly reduced the costs of drilling
wells. To date the company has manufactured over 5,000 Cantilever masts.
A Record Of LeadershipToday, WCI provides the worldwide petroleum industry with drilling
equipment solutions and engineering from corporate headquarters in Tulsa,
Oklahoma. Modern test assembly and shipping facilities at the nearby
Port of Catoosa ensure ease of shipment by land or sea. In additionto our sales offices located in Houston, WCI has a fabrication facility in
Liberty, Texas.
WCI employees are some of the most experienced in the industry,
applying the background, knowledge and engineering advancements with years
of services.
Innovation From The Top Down
WOOLSLAYER COMPANIES INC.M a s t s , D e r r i c k s & D r i l l i n g A c c e s s o r i e s f o r t h e W o r l d w i d e P e t r o l e u m I n d u s t r y
-
8/22/2019 Wool Slayer 1
2/8
WCI is instrumental in the design and fabrication of derricks for deep well
offshore drilling. Whether you need a standard derrick or a custom design for a
special application, WCI derricks are built under license of API-4F, and feature
the design integrity that has made them the standard of the industry.
Standard DerricksWCI builds a wide range of derricks for use on fixed platform drilling rigs.
Dynamic DerricksWCI Dynamic Derricks resist the hull motion of semi-submersibles, drill ships
and jack-ups under tow. Dynamic derricks are also provided to resist seismic
induced loads on offshore platforms. All types of motion compensators, power
swivels and pipe-racking systems are accommodated.
Innovative, Dependable Derricks
DERRICKS
HOOK
CAPACITY
MODEL HEIGHTBASE
WIDTH
NUMBER
OF LINES
STRUNG
TOP
2,500,000 15263 170 40 x 40 16 18
2,000,000 15270 170 40 x 40 16 18
2,000,000 15267-A 170 40 x 40 16 18
1,500,000 15269 160 36 x 36 14 18
2,500,000 15265 160 36 x 30 14 18
1,500,000 15266 160 36 x 36 14 14
1,300,000 15267 170 40 x 40 14 14
1,300,000 15268 160 30 x 30 14 14
1,250,000 15262 170 30 x 30 14 14
1,000,000 15259 170 30 x 30 12 14
-
8/22/2019 Wool Slayer 1
3/8
WCI designs and manufactures a variety of masts for both onshore and offshore applications. Each one is built to
demanding industry specifications. In addition, WCI designs and fabricates special application masts to fit any need.
Many of the top quality masts designed by LCM are still in use 30, 40, even 50 years after being put into service.
Some WCI masts have been used to drill conventional wells to depths in excess of 30,000 ft. Permanent records are
maintained on each mast, and WCI is able to supply technical information, furnish replacement parts, and provide
expert field service whenever and wherever its needed.
Bootstrap MastsThe Bootstrap Mast features mast sections, which are inserted into the bottom section of the mast and hydraulically
raised to working position.
Butterfly MastsFeaturing the patented folding mast section, the Butterfly Mast is specially designed for highway transportation and
expedient rig-up.
Cantilever MastsFirst introduced more than 60 years ago, the Cantilever Mast is designed to be installed on a box-on-box style or
self-erecting substructure.
Hi-Floor MastsHi-Floor Masts utilizes a special cantilever design, which carries its own floor. The Hi-Floor Mast design provides
clearance beneath the rotary beams for various wellhead and blowout preventor configurations. The Hi-Floor Mast is
an alternative to the box-on-box style of substructure and is lighter and easier to transport.
Mast Designs
-
8/22/2019 Wool Slayer 1
4/8
WCI Crown BlocksWCI manufactures a complete line of standard and custom Crown Blocks for
masts and derricks in accordance with API Specification 8C.
Industrial SheavesWCI Sheaves, using roller bearings, are designed and fabricated to quality
standards that meet API Specification 8C.
Blocks & Sheaves
DERRICK CROWN BLOCK SIZES & SPECIFICATIONS
Capacity(Tons)
Rated StaticHook Load
Capacity(Tons)
Number ofSheaves
SheaveDiameter
GrooveDiameter
420 350 6 42 1 1/4 1 3/8
583 500 7 50 1 3/8 1 1/2
583 500 7 60 1 3/8 1 1/2
743 650 8 60 1 1/2 1 5/8
857 750 8 60 1 1/2 1 5/8
1,125 1,000 9 72 1 7/8 2
SHEAVE SPECIFICATIONS
Sheave O.D. Shaft Size Bearing
20 5 1/2 Straight Roller
24 5 5/8 Tapered Roller
24 4 Straight Roller
24 2 1/2 Tapered Roller
30 5 1/2 Straight Roller
30 5 5/8 Tapered Roller
36 5 1/2 Straight Roller
36 6 Straight Roller
36 6 1/2 Tapered Roller
36 7 Straight Roller
36 8 Tapered Roller
36 9 1/4 Tapered Roller
36 5 5/8 Tapered Roller
42 6 1/2 Tapered Roller
42 8 Straight Roller
42 8 Tapered Roller
42 10 Straight Roller
42 9 1/4 Tapered Roller
48 8 Tapered Roller
48 9 1/4 Tapered Roller
48 9 1/4 Straight Roller
48 10 Straight Roller
48 10 Tapered Roller
48 10 1/2 Tapered Roller
50 10 1/2 Tapered Roller
50 9 1/4 Tapered Roller
50 10 1/2 Tapered Roller
50 12 Tapered Roller
56 12 Tapered Roller
56 9 1/4 Tapered Roller
56 10 1/2 Tapered Roller
56 12 Tapered Roller
60 12 Tapered Roller
60 9 1/4 Tapered Roller
60 10 1/2 Tapered Roller
60 12 Tapered Roller
72 12 Tapered Roller
80 12 Tapered Roller
80 14 Tapered Roller
84 12 Tapered Roller
84 14 Tapered Roller
CATLINE AND CORELINE SHEAVE UNITS
Unit Model No.Sheave
O.D.Groove
SizeCapacity Bearing
CatlineSheave
1476 155/8 O.D.3/4 O.D.
1 1/2 O.D.
12,000 Lb.SLT*
BronzeBushing
CorelineSheave
1489 249/16 O.D.5/8 O.D.3/4 O.D.
18,000 Lb.SLT*
TaperedBearing
* Single Line Tension
TRAVELING BLOCK SPECIFICATIONS
Capacity(Tons)
Number ofSheaves
Sheave O.D. Groove O.D.Weight Lbs.
(Est.)
350 5 42 1 1/4, 1 3/8 8,800
500 6 50 1 3/8, 1 1/2 13,500
500 6 60 1 3/8, 1 1/2 17,500
650 6 60 1 1/2, 1 5/8 22,000
750 7 60 1 1/2, 1 5/8 25,500
1,000 8 72 1 7/8, 2 30,600
-
8/22/2019 Wool Slayer 1
5/8
WCI supplies a complete line of BOP Handling Systems in capacities from
20-tons to 100-tons. Each system is furnished with two (2) WCI hydraulic
cylinder hoists, two (2) trolley beams, a BOP handling cradle, control console
and supply hoses. The hoists are furnished with 10 ft. of lift, geared type trolleys
(manual and powered) and hoisting lines.
In addition, WCI provides a transportation skid for handling the BOP hydraulic
hoists, and an adjustable BOP transportation and test stump skid system
designed to accommodate the BOP stack.
Deadline AnchorsDesigned and manufacztured to API-8C certification, WCI Deadline Anchors are
available in both pedestal and leg-mounted configurations.
These high-quality anchors are rated to 100,000 lb. and 50,000 lb. single-line
pull capacity, and feature all-welded construction. In addition, they come with
Lebus grooving for 138 diameter through 1 diameter dri lling line with tapered
roller bearings.
WCI Deadline Anchors are furnished with load cells, and anchor bolt patterns are
interchangeable with oilfield standards. Other pedestal-type WCI anchors are
available for use as breakovers for raising and lowering masts.
BOP Handling Systems
-
8/22/2019 Wool Slayer 1
6/8
Casing Stabbing PlatformsWCI provides both air-powered and hydraulic Adjustable Casing Stabbing
Platform Units. The work platform is adjustable from 23 ft. to 47 ft. elevations
above the drill floor, mounted on cam rollers, and designed to fold up against
track for storage and transport. The WCI Casing Stabbing Platform is designed,
fabricated and tested in accordance with industry standards and is ABS certified.Each unit includes the following:
Air powered manriding hoist UL certified for 1000 lb., furnished withautomatic spring-actuated power-released primary load brake
Two dynamic safety brakes, furnished with a positive mechanical (wedgetype) locking device designed to actuate in case of hoist failure oroverspeed
Derrickmans belt
Derrickmans harness with shoulder straps and safety line withattachment padeye
Safety screen installed on backside of work platform
Guide track
Work platform includes counter-weighted hinged.
Personnel ElevatorThe WCI Hydraulic Powered Personal Elevator is designed to travel from the
ground to the drill floor elevation. A high-quality personnel car with a 4 ft.square floor area is mounted on dual track beams with cam rollers. The unit is
available in both hydraulic and electric powered configuration. Each unit includes
the following:
Dynamic safety brakes
Safety gate
Safety screen
Tailboard skids on track frame
Padeyes for pinning to drill floor and sub-base at ground level
Lifting eyes
Rated for 2,000 lb. capacity
Casing Stabbing Platforms & Personnel Elevators
-
8/22/2019 Wool Slayer 1
7/8
WCI offers comprehensive engineering services through our LCM Engineering
Division, serving the petroleum, offshore, civil, electrical, manufacturing and
aerospace industries.
LCM Engineering has designed and fabricated oil-drilling equipmentsince before 1930, and has regularly met all certification requirements,
adhering to API quality control, and other specifications outlined by AWS, ANSI,
and ASTM.
Historically, WCI has provided complete engineering studies on
equipment such as derricks, masts, cranes and substructures. LCM Engineering
has also produced extensive studies for various modifications made to
existing structures.
LCM Engineering specializes in the application of engineering,
computing and management techniques for carrying out engineering projects.
The engineering staff has many years of theoretical and practical experience in
all engineering disciplines applied to major projects around the globe.
Primary LCM Engineering Services Structural design and analysis
Historical research of existing structures
Computer-aided design
Structural monitoring
Field surveys of existing structures
On-site fabrication inspection
Test assembly
Field supervision of installation and commissioning
LCM consulting and engineering services allow WCI to fabricate products for
customers at a qualified facility of their choice. With complete turnkey services,
LCM Engineering handles every phase of a project.
Worldwide Field ServiceWCI engineers and field technicians are available and frequently travel
wherever customers require. With drilling rigs working around the world, the
constant demand for WCI expertise and field service is met with industry
veterans who have the professional know-how and access to WCI products and
technology. The result is less downtime and a more cost-effective drilling
operation. Comprehensive field service by WCI includes inspection, Recertification,
and supervision of modification and repairs for masts, derricks, substructures
and many other WCI products.
Engineering And Field Services
-
8/22/2019 Wool Slayer 1
8/8
LICENSED UNDER API LICENSED UNDER API
4F AT PORT OF CATOOSA, OK 8C AT LIBERTY, TX
P.O. BOX 216 TULSA, OK 74101-0216 TEL.: (918) 523-9191 FAX: (918) 523-0854
5002 BIRD CREEK AVENUE CATOOSA, OK 74015-3011 TEL.: (918) 266-3927 FAX: (918) 266-4681
3810 BEAUMONT AVENUE LIBERTY, TX 77575 TEL.: (936) 336-8884 FAX: (936) 336-8894
5065 WESTHEIMER, SUITE 850E HOUSTON, TX 77056 TEL.: (713) 552-1122 FAX: (713) 552-1205
E-MAIL ADDRESS: [email protected] /WEBSITE: www.lcm-wci.com
TOLL FREE 1-800-864-8794
mailto:[email protected]?subject=Composite.Catalog.Information.Requesthttp://www.lcm-wci.com/http://www.lcm-wci.com/mailto:[email protected]?subject=Composite.Catalog.Information.Request