wm 6 kg automatic new final - ecostar · candle, mosquito-repellent incense, cigarette and other...
TRANSCRIPT
•Please read this manual carefully before Washing Machine operation.
• Retain it for future reference.
• Record model number and serial number of the unit.
• See the label attached on the back cover and quote this information
to your dealer when you require service.
Owner’s Instruction ManualModel: WM06-700
WASHING MACHINE
READ THIS MANUAL CAREFULLY
You will find many helpful hints on how to use and maintain your washer properly. Just a little preventative care can save a great deal of time and money over the life of washer. This manual will guide to many answers to common problems and operations of washing machine.
Contents
Introduction
Before Starting to Wash
Additional FunctionProgram
Installation
Care and Maintenance
Troubleshooting
Specifications
Common Wash Problems
Troubleshooting
Malfunction Display and Solutions
AIR DRY
DELAY START Wash
Other Useful Functions
Placing and Leveling
Connecting Water Supply Hose
Installation of Drain Hose
Grounding Method
Cleaning and Maintenance
Safety Information
Parts Identification of the Washer
Function Information
Preparation Before Washing
Special Guide for Stain Removal
Function of each Button
01
04
05
06
08
09
11
12
13
14
15
16
17
18
20
21
22
23
Default Program Timers 24
Specs
Warning
Observe the following items in order to prevent from injuring yourself, others and the damage of property:
This graphic represents (forcible execution), and detailed forcible execution items will be displayed inside the graphics.
This graphics represents (operation prohibited), and detailed prohibitive items will be displayed inside the graphics.
This graphics represents(cause attention),and detailed cautions will be displayed inside the graphics.
Please observe following contents of graphics.
!
Warning
Caution This will remind you that injury to people and damage to property may occur.
This indicates serious injury or death to human being may be caused.
This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety. Children should be supervised to ensure that they do not play with the appliance.
No dampness No rinsing
小天鹅
小天鹅
No dismantling No touching
Please do not insert your hand and take out clothes from inside the spin barrel before it is fully stopped.
Please do not directly rinse the machine with water when cleaning.
Please do not dismantle and assemble the machine without authorization.
Please do not install the machine in damp and raining environment to avoid electric shocking, catching fire, faults and distortion accidents.
Safety InformationIn
tro
du
ctio
n
1
!
Prohibited
Prohibited
Pull out the plug
!
小天鹅
Prohibited
Smoke and fire prohibited
Earthing
Please do not let children climb the machine or peer into the rotating spin b arrel to avoid accidents.
It is prohibited to wash the clothes touching with kerosene, gasoline, alcohol and other flammable materials.
Please do not damage power flexible cord and power plug to avoid electric shocking, s h ort circuit and catching fire.
Please do not damage power flexible cord and power plug to avoid electric shocking, s h ort circuit and catching fire.
Regularly clean the power plug to remove dust and dirt to avoid contact failure.
Please pull out plug from the socket if the machine is not in use.
(earthing)
Please well connect the earth line of socket to avoid electric shocking by accidental leakage.
Please do not place on the washer burning candle, mosquito-repellent incense, cigarette and other flammable things, as well as electric stove, air heating fan and other heating sources.
Please insert the power plug tightly.
Warning
2
Intr
od
uct
ion
!Wet hands are prohibited
!+
+
小天鹅
>50 C
Prohibited
Prohibited
小天鹅
Prohibited
!Prohibited
Please use correct power source. Please do not pull out or insert the plug with wet hands to avoid electric shocking.
Please ensure that the water inlet pipe is connected and the tap is opened before washing clothes.
The water temperature shall not exceed 50℃ when washing with warm water.
Customers are not allowed to change the power line without permission.
It is strictly prohibited to place children or lay weights on the washer.
Please do not pull the electric cord when pulling out the plug.
Please do not wash down jacket, craincoat, fishing coat and similar clothes in the washer.
Warning
Caution
3
Intr
od
uct
ion
Top lid
Control Panel Frame
Cabinet
Drain Hose(For lower drain only)
Adjustable Leg
Adjustable Foot Knob
Upper Drain Hose
(For upper drain only)
Body
Accessories
Only for lower drain hose
Fixing ring is used
for the fixing in time of
the installation of the
lower drain hose.
Base cover
Self-tapping screw
Only for models including base cover
Water inlet hose assembly
Parts Identification of the Washer
4
Intr
od
uct
ion
Use this Program for heavily soiled durable garments e.g overalls, jeans. Thick and heavy clothes or those which
are excessively dirty like jeans or working uniforms can be washed.
JEANS Wash
QUICK wash
QUICK WASH can be selected to wash lightly soiled clothes of less than 2.0 kg in a short time.
Our machines provides various washing methods which suits various conditions and types of laundry
Different types of laundry washing
Use this Program for everyday washing e.g sheets, towels, T shirts.
Normal Wash
Function Information
ANTI - WRINKLE
As for not easily fading ,deforming , and non-waterproof clothes , can use the function to dry clothes without eating, and to reach the result of being dried in a room.
DELAY START Wash is used to delay the finishing time of the operation. The number of hours to be delayed can be
set by the user accordingly.
When the user needs only SPIN, RINSE/SPIN, RINSE, WASH/RINSE, WASH, WASH/RINSE/SPIN,
SOAK/WASH/RINSE/SPIN
Delicate wash, specially for silk fabrics.
The wash time is short ,rinses many time with high water level ,thoroughly wash away the garment.
AIR DRY
OPTION Washing
SILK
DELAY START Wash
5
Intr
od
uct
ion
Care Labels
Look for a care label on your clothes. This will tell you about the fabric content of your garment and how it should be washed.Sort clothes into loads that can be washed with the same Wash cycle, Water Temperature and spin speed.
Cloth Sorting for Wash
To get the best results, different fabrics need to be washed in different ways.
Check Cloths before Loading
(Heavy, Normal, Light)
COLOR (Whites, Lights, Darks)
LINT (Lint producers, Collectors)
Lint ProducersLint Collectors
Dirt/SOIL Separate clothes according to the type and amount of soilSeparate white fabrics from colored fabrics.Separate lint producers and lint collectors.Terry cloth, Chenille, Towels, Nappies, DiapersSynthetics, Corduroy, Permanent Press, Socks
Clear all pockets of cloth & make sure they are empty. Things such as nails, hair clips, matches, pens, coins, and keys can damage both your washer and your clothes.Repair any torn garments or loose buttons. Tears or holes may become larger during washing.Remove belts, under wires, etc. to prevent damage to the machine or your clothes.Pre-treat dirt and stains on cloths.Make sure the clothes are washable in water.Check the Washing instructions.Remove tissues if found in pockets.
Caution
Do not wash or spin any item labeled or known to be water-proof or water-resistant, even if the product care label on the item permits machine washing. Failure to follow these instructions could result in severe damage to your laundry, your washer and/or property damage as a result of abnormal vibration of the washer.- Examples of Water-proof or Water-resistant items include certain mattress pads, mattress covers, rain gear, camping gear, skiing apparel, outdoor gear and similar items.
Pre-treatment of stains or heavy soil
Loading in Washing Machine
Pre-treat shirt collars and cuffs with a pre-wash product or liquid Detergent when placing them in the Washer. Before washing treat special stains with bar soaps, liquid Detergent or a paste of water and grainy detergent.Use a pre-treat soil and stain remover.Treat stains AS SOON AS POSSIBLE. The longer they are left the harder they are to remove.
Do not wash fabrics containing flammable materials (Waxes, cleaning fluids, etc.)
Light weight and Large-sized clothingClothes like downs and Woolens are light weight, large and float easily. Use a nylon net and Wash them in a small amount of Water. If the laundry floats during the Wash cycle, it may become damaged. Use dissolved Detergent to prevent the Detergent from clumping.
Long length laundry itemsUse nylon nets for long, DELICATE items. For laundry with long strings or long length, a net will prevent tangling during washing. Fasten zippers, hook, and strings to make sure that these items don’t snag on other clothes. Nylon net is not supplied by EcoStar.
Fire HazardNever place items in the washer that are dampened with gasoline or other flammable fluids. No washer can completely remove oil.Do not dry anything that has ever had any type of oil on it (including cooking oils). Doing so can result in death, explosion, or fire.
WARNING
Be
fore
Sta
rting
to W
ash
Cloth Load SizeThe WATER LEVEL should just cover the clothes. Adjust the load size accordingly, loosely load clothes no higher than the top row of holes in the washer tub. To add items alter Washer has started, press Start button and submerge additional items. Close the lid and press Start button again to restart.
Preparation Before WashB
efo
re S
tart
ing
Was
h
6
+
+
1
2
Adjust the adjustable foot to make the washer to be placed stable
Adjustable foot (extend when clockwise rotating and shorten when counter clockwise rotating)
(Slightly incline the washer first and loosen the adjustable foot knob. Adjust the adjustable foot so as to ensure four corners of washer be steadily contacted with the ground. Then tighten the adjustable foot knob and lock it. If the ground is obviously not flat, correction should be made on the ground surface, otherwise the washer barrel will incline and knock the cabinet). Foot Rotate clock wise
+
+
For one inlet hoseFor two inlet hoses
+
+
+
+
Install the water inlet hose
3 Connect the power source
4 Turn on the water supply
5 Put down the drain hoseGravity drain
6 Put in clothes and suitable amount of washing powder for washing.
Before washing, please do take out coins, keys and other hard goods, and zip up clothes tightly to prevent them and barrel from damage.
!NOTICE
Please follow the below step guide before starting washing
Preparation Before Wash
7
Bef
ore
Sta
rtin
g W
ash
Remove stains promptly.Determine the kind of stain, then follow the recommended treatment in the stain removal chart below.To pre-treat stains, use pre-wash product, liquid Detergent or paste made from detergent and water.Use COLD Water on unknown stains because HOT Water can relief stains.Check care label instructions for treatments to avoid on specific fabrics.Check for color fastness by testing stain remover on an inside seam.Rinse and Wash items after stain removal.
Adhesive tape, chewing gum, rubber cement
Apply ice. Scrape off excess. Place stain face down on paper towels, saturate with prewash stain remover or nonflammable dry cleaning fluid.
Baby formula, dairy products, egg
Use product containing enzymes to pretreat or soak stains.
Beverages (coffee, tea, soda, juice, alcoholic beverages)
Pretreat stain. Wash using COLD Water and bleach safe for fabric.
Blood Rinse with COLD water. Rub with bar soap. Or pretreat or soak with product containing enzymes. Wash using bleach safe for fabric.
Candle wax, crayon Scrape off surface wax. Place stain face down between paper towels. Press with warm iron until wax is absorbed.Replace paper towels frequently. Treat remaining stain with pre-wash stain remover or nonflammable dry cleaning fluid. Hand wash to remove solvent. Wash using bleach safe for fabric.
Chocolate Pre-treat or soak in WARM water using product containing enzymes. Wash using bleach safe for fabric.
Collar or cuff soil, cosmetics Pre-treat with pre-wash stain remover or rub with bar soap.
Dye transfer on white fabric Use packaged color remover. Wash using bleach safe for fabric.
Grass Pre-treat or soak in WARM water using product containing enzymes. Wash using bleach safe for fabric.
Grease, oil, tar_(butter, fats, salad dressing, cooking oils, car grease, motor oils)
Scrape off residue from fabric. Pretreat. Wash using hottest water safe for fabric. For heavy stains and tar, apply nonflammable dry cleaning fluid to back of stain. Replace towels under stain frequently. Rinse thoroughly. Wash using hottest water safe for fabric.
Ink Some inks may be impossible to remove. Washing may set some inks. Use pre-wash stain remover, denatured alcohol or nonflammable dry cleaning fluid.
Mildew, scorch Wash with chlorine bleach if safe for fabric. Or, soak in oxygen bleach and HOT Water before Washing. Badly mildewed fabrics may be permanently damaged.
Mud Brush off dry mud. Pre-treat or soak with product containing enzymes.
Mustard, tomato Pre-treat with prewash stain remover. Wash using bleach safe for fabric
Nail polish May be impossible to remove. Place stain face down on paper towels. Apply nail polish remover to back of stain.Repeat, replacing paper towels frequently. Do not use on acetate fabrics.
Paint, varnish WATER BASED: Rinse fabric in cool Water while stain is wet. Wash. Once paint is dry, it cannot be removed,OIL BASED AND VARNISH: Use solvent recommended on can label Rinse thoroughly before washing
Rust, brown or yellow discoloration
For spots, use rust remover safe for fabric. For discoloration of an entire load, use phosphate Detergent and non-chlorine bleach. Do not use chlorine bleach because it may intensify discoloration.
Shoe polish LIQUID: Pre-treat with a paste of granular Detergent and Water. PASTE: Scrape residue from fabric. Pre-treat with pre-wash stain remover or nonflammable dry cleaning fluid, Rub Detergent into dampened area, Wash using bleach safe for fabric.
CLOTHS / STAIN TYPES & REMOVAL PROCESS
STAIN TREATMENT
Do not use or mix liquid chlorine bleach with other household chemicals such as toilet cleaners, rust removers, acid or products containing ammonia. These mixtures can produce dangerous fumes which can cause serious injury or death.To reduce the risk of fire or serious injury to persons or property, comply with the basic warnings listed below:Read and comply with all instructions on stain removal products.Keep stain removal products in their original labeled containers and out of children's reach. Thoroughly wash any utensil used.Do not combine stain removal products, especially ammonia and chlorine bleach. Dangerous fumes may result,Never wash items which have been previously cleaned in, washed in, soaked in or spotted with gasoline, dry cleaning solvents or other flammable or explosive substances because they give off vapors that could ignite or explode.Never use highly flammable solvents, such as gasoline, inside the home. Vapors can explode on Contact with flames or sparks.
WARNING
Special Guide to Stain Removal
8
Bef
ore
Sta
rtin
g W
ash
Press the button, by washing quantity select
water level position in drums. The indicator
lights move at each press on the button light
and flash in turn.
WATER LEVEL BUTTON
Press the button to preset delay time. Less
than 24 hours each press the button, the
delay time is edit and or, more than 24
hours each press the button, the delay
time is added six hours, after to 48 hours,
the preset indicator is come back origin
status. if always press the button, the
delay time will automatically change.
DELAY
Program can select fully automatic
program like:
PROGRAM
• Normal • Quick • Jeans
• Anti - Wrinkle • Silk • Air Dry
Wash: Press the button to select the washing time.
Rinse: Press the button to select rinse.the time of rinse.
Spin: Press the button to select the time of spin.
WASH, RINSE & SPIN
Press the Water Level and
Spin
at the same time to lock buttons
on control panel.
Press the Water Level and
Spin at the same time again to
unlock buttons.
CHILD LOCK
Function of Each Button
9
Bef
ore
Sta
rtin
g W
ash
ON and OFF Button
Automatic Power
POWER
After program selection, press the button to start. Press the button to pause in the course of operation, press the button again the program continues till the program is finished.
START/PAUSE
Function of Each Button
10
Bef
ore
Sta
rtin
g W
ash
Press the PROGRAM button to further go into AIR DRY button to select the desired timing.
Press the POWER button to turn power on.
Press the START/PAUSE button.
Close the lid
Air DryA
dd
itio
nal
Fu
nct
ion
Pro
gra
m
11
Delay time means the preset beginning time of washing.
Press the “DELAY” button each time, the number on the digital indication adds by “1”; After the number reaches “24”, press the “Delay” button each time, the number adds by “6”; After the number reaches 48, the light of delay time is turned off, and the delay program return to original status.
Switch on the power button to turn power on.
Open the tap and lay the drain hose.
Put in the laundry and detergent.
Select the proper water level according to the quantity of clothes.
5.Select the functions and programs.
1
2
3
4
5
Press “DELAY” button to select the beginning time of washing. 6
Close the lid and press “START/PAUSE” button7
Confirmation of the delay and inspection
After the delay function is started, the corresponding delay light will flash, and other lights are turned off. 1
After the delay function is started , press “ Delay” button continuously , you may inspect the presetprogram and function. Loose the button , the program return to delay status.
2
Cancel the delay time, or alternate the delay time
Press “ Power” button to cancel the delay time.1
2 To change the delay time , cancel the delay time first, and then press “Delay” button to reset.
Delay Start WashA
dd
itio
nal
Fu
nct
ion
Pro
gra
m
12
Child Lock
If you want to lock all the keys to prevent settings from being changed by a child, you can use the child lock option.
1 Press the POWER (AUTO OFF) button
2 Press the START/PAUSE button to start washing
• After all washing conditions are set according to the manual.
• Turn POWER ON
Automatic power shut off
If the laundry is placed uneven before spinning, it is likely to cause vibration during spinning. The washing machine has a function of adjusting imbalance. When working, the washing machine always inspects operation state automatically. If the spinning vibration is too great, the washing machine automatically starts the adjusting program to balance.
When the machine adjusts imbalance, rinse light will flash, and the machine will start to inject water to set water level. The machine adjusts imbalance automatically for about 1 minute, then drains water, returns to original spinning state. If the washing machine can adjust the imbalance twice. If the adjustment has no function, it will alarm.
Standard procedures default implementation fuzzy control function. After startup, such as water level before starting the keys will be cancelled automatically according to the fuzzy control functions; In addition, the fuzzy measure before, if there is no water, tub fuzzy measurement, the water level directly as the default file namely 6 gear levels. Fuzzy control function is at boot automatically after the determination of cloth is decide the water level. In fuzzy testing process, water circulation flashing lights display, digital pipe display.
If the machine do not start to work within 10 minutes after powered on, it will power off automatically. 1
After end of operation and the buzzer sounding 6 times, it will power off automatically.2
1
Adjusting for imbalance
2
1
Fuzzy Control Function
If the power supply becomes off suddenly during operation, the machine remembers the current operation state. When power is on, the machine returns to former operation state automatically.
1
Power Failure Memory
4 Child UNLOCK
Press both the SPIN and WATER LEVEL button simultaneously for CHILD UNLOCK.
3 Child LOCK
When the machine is power on, press SPIN and WATER LEVEL at the same time to set the CHILD LOCK, then this function is active, is indicated 1 second every other 5 seconds.
Other Useful FunctionsA
dd
itio
nal
Fu
nct
ion
Pro
gra
m
13
n
1
Please ensure that all the tapes, safety packing, protective material has been removed before operating machine.
Place the machine on a flat and firm surface which allows proper clearance.
We suggest a minimum clearance of 2 cm to the right side and left; sides of the machine for ease of installation.
At the rear, a minimum clearance of 10 cm is suggested.
If the washer is installed on uneven, weak or tilted floor causing excessive vibration, spin failure can happen. lt must be placed on a firm and level floor to prevent spin failure.
NOTE
Open the lid and look from above to see if it seem in perfect center from all sides
Check that the machine is level
Leveling the machine
Lift the front of the washing machine and twist the Adjustable Leg until it's placed in the center.
Caution
If the power is supplied from a cord extension set or generator, the cord extension set or electrical portable outlet device should be positioned so that it is not exposed to splashing or ingress of moisture.
*Please check that Anti-Rat Cover (optional) is firmly fixed on Washing machine and screw properly
CORRECTWRONG
Top view of the Washing Mahine
Placing and Laveling
14
Inst
alla
tio
n
Before connecting the Water Supply Hose to the water tap, check the hose type and choose the correct instruction here under.Note that the Water Supply Hose supplied may vary from country to country, Make sure to connect the blue inlet hose to the COLS water tap, and the orange inlet hose to the HOT water tap.
Connecting Water Supply Hose to water tape
Normal Type (Normal tap without thread & screw type inlet hose)
Untighten the screw of the connector so that the tap can be placed in the middle
Untighten the screw
Fixing the connector to the tap
Push the upper connector up till the rubber packing is in tight contact with the tap, then tighten the 4 screws.
Attach the water supply hose securely to the connector
Push the water supply hose vertically upwards so that the rubber seal within the hose can adhere completely to the tap
Check the connection of water supply hose and the connector
Fixing the connector to the water supply hose
Attach the water supply hose to the connector and then tighten it by screwing it to the right
After connecting the hose, open the tap to check for any water leakage.If the water leaks, close the tap and start again from step 1.
The washing machine is to be connected to the water mains using new hose-sets and old hose sets should not be reused.
Rubber Packing
Connector
Screw
Connector
Water Supply Hose
Connecting Water Supply Hose
15
Inst
alla
tio
n
1
Unpacking the Unit
Ÿ
Ÿ
Ÿ
Remove package and take out the bottom board of the cabinet on the foam cover.
Open the lid of washer's door and take out accessories.
A trial operation or washing on the foamed cushion is strictly forbidden.
Installation of drain hose
Completely sleeve the drain hose over the sewer.Then fit the end of the drain to the outlet of the drain outlet of washing machine.
Fix and tighten it with a hoop. ( As shown in the figure )Make sure that its not loose as water might drip from loose outlet.
2
Placement of water drain hose for lower drain system only
Under 3m
Under 15 cm
If the water drain hose shall be extended, its length shall not exceed 3 meters, otherwise it will affect the water discharging time.
The placed height of water drain hose shall not exceed 15 cm
Do not bend or twist the water drain hose and place it under the washer
Before connecting the drain hose check your drain hose model and follow the instruction:
Installation of Drain Hose
Base foamed cushion
16
Inst
alla
tio
n
Earth wire should be connected.If the earth wire is not connected, there is possible a danger of electric shock caused by the current leakage.
Grounding Method with Ground insert space Terminal
If the AC current outlet has a ground terminal, then separate grounding is not required. Note that AC power outlet configuration may differ from country to country.
Ground Terminal
Outlet with ground terminal
Most appliances recommend they be placed upon a dedicated circuit; that is, a single outlet circuit which powers only that appliance and has no additional outlets. Overloaded wall outlets, loose or damaged wall outlets, extension cords, frayed power cords, or damaged or cracked wire insulation are dangerous. Any of these conditions could result in electric shock or fire. Practically examine the cord of your appliance, and if its appearance indicates damage or deterioration, unplug it, discontinue use of the appliance, and have the cord replaced with an exact replacement part by an authorized servicer. Protect the power cord from physical or mechanical abuse, such as being twisted, kinked, pinched, closed in a door, or walked upon. Pay particular attention to plugs, wall outlets and the point where the cord exists the appliance.
Caution
Burying Copper Plate
Connect the Ground Wire to a Ground Copper Plate and bury it more than 75 cm in the ground.
Ground Wire
75 cm
Ground Copper Plate
GroundWire
Short - circuitBreaker
Connect the ground Wire to the socket provided exclusively for Grounding.
If grounding methods described above are not possible, a separate circuit breaker should be employed and installed by a qualified electrician.
Caution
• To prevent a possible explosion, do not connect ground to a gas pipe.• Do not connect to telephone wires or lightning rods, This may be dangerous during electrical storms.• Connecting ground to plastic has no effect.• Ground wires should be connected when an extension cord is used.
Grounding Method
Other Grounding Method
Using Ground Wire
Using a Short Circuit Breaker
Car
e a
nd
Mai
nte
nan
ce
17
1
End of Program
Use gentle clothing to wipe off the water and dirt on the surface each time after using the washing machine.Detergent , propellant and other chemicals are not allowed to use so as to avoid any damage to the plastic accessories.
If the drain filter is not cleaned at proper time (every 10 times of use),Drain problem could be caused.Notes:
Drain the water out of the pump, under which use a container to collect
Loosen the pump cover anti clockwise
ŸThe washing machine will send off the sound of “dou-dou” at the end of any program operation to remind you to take out the laundry or operate it again.
ŸAfter the sound ,the washing machine returns to its power-off state with no display and all lights off.
ŸPlease shut off the tap, pull out the plug when not in use to avoid water leakage or the fire accidents
For MAGIC filter
Maintenance
To Clean the water inlet
After long time use, the water inlet mesh bag may be blocked with smudginess, and should be cleaned according to the following steps:
1. Switch on the power, followed by shutting off the tap .2. Let the washer works for 5 seconds so that water flows into the tub
through the water inlet hose. then turn off the power.3. Unload the water inlet hose and clean the mesh bag, then restore
the water inlet assembly.
To Clean of the lint filter
After using the washing machine for a period, please clean it according to the following steps:1. Take out the lint filter.2.Open the filter and wash it clean in the water.3. Restore it and fix it.
For NORMAL filterAfter using the washing machine for a period, clean it according to the following steps:1. Take off the lint filter.2. Turn over the mesh bag and wash it clean in the water.3. Restore and fix it.
To Clean of the Drain pump lint filter (only for having drain filter)
2 3 Take out the lint filter
4 5 6Clean the filter Restore it and adjust the convex place to align at the pump hole.
Tighten the pump cover clockwise
Cleaning and Maintenance
18
Car
e a
nd
Mai
nte
nan
ce
Wash Inner-tub
Inlet Hoses Exterior
Long Vacations
Leave the lid open after washing to allow moisture to evaporate. If you want to clean the inner-tub use a clean soft cloth dampened with liquid Detergent, then rinse. (Do not use harsh or gritty cleaners.)
Hoses connecting washer to faucet should be replaced every 5 years.Immediately wipe off any spills. Wipe with damp cloth. Try not to hit surface with sharp objects.
Be sure water supply is shut off at faucets. Drain all water from hoses if weather will be below freezing.
Cleaning the Inside of your Washer
If you use fabric softener or do regular COLD water washing, it is very important that you occasionally clean the inside of your washer.
Fill your washer with HOT water.
Add about two cups of a powdered Detergent that contains phosphate.
Let it operate for several minutes.
Stop the washer, open the lid and leave it to soak overnight.
After soaking, drain the washer and run it through a normal cycle.
We do not recommend that you wash clothes during this procedure
ŸŸŸŸŸ
Products that might damage your washing machine
ŸŸ
ŸŸ
Ÿ
Concentrated bleaches and diaper sanitizer will cause damage to the paintwork and components of your washer.
Hydrocarbon solvents i.e. petrol, paint thinners and lacquer thinners, etc. can dissolve plastic and blister paint (Be careful when washing garments stained with these solvents as they are flammable DO NOT put them in washer or dryer.)
Some pretreatment sprays or liquids can damage your washer's control panel.
Use of dyes in your washer may cause staining of the plastic components. The dye will not damage the machine but we suggest you thoroughly clean your washer afterwards. We do not recommend the use of dye strippers in your washer.
Do not use your washer lid as a work surface.
ŸWhen there is a fear of freezing
• Close the water taps and remove the Water Supply Hose.
• Remove the water which remains in the water supply.
• Lower the drain hose and drain the water in the bowl and the drain hose by spinning.
If Frozen
• Remove the water supply hose, and immerse it in HOT water at approx. 50 C.
• Pour approx. 2 liters of HOT water at approx. 50 C, into the bowl and let it stand for 10 minutes.
• Connect the water supply hose to the water tap and confirm that the washing machine performs the supply and drainage of water.
Cleaning and Maintenance
19
Car
e a
nd
Mai
nte
nan
ce
Many washing problems involve poor soil & stain removal, residues of lint and scum and fabric
damage. For satisfactory washing results, follow these instructions.
WASH PROBLEM
Poor soil removal
Blue Stains
Black or Grey Marks on the cloth
Yellow or brown rust stains
Lint
Residue or Detergent
Holes, tears or snags
ŸNot enough Detergent
ŸWash Water Temperature too low.
ŸOverloading the washer
ŸIncorrect wash cycle
ŸIncorrect sorting
ŸDo not pre-treat stain
ŸUndiluted fabric softener dispensed directly onto fabric
ŸA buildup caused by the iteration of fabric softener and Detergent can flake off and mark cloths.
ŸNot enough Detergent
ŸIron or manganese in Water supply, water pipes
ŸIncorrect sorting
ŸTissues left in pocket
ŸOverloading the washer
ŸOverloading the washer
ŸUndissolved Detergent
ŸUse too much Detergent
ŸIncorrect use of chlorine bleach.
ŸUnfastened zippers, hooks, buckles
ŸRibs, tears and broken threads
ŸOverloading the washer
ŸDegradation of fabric
ŸUse correct amount of Detergent for load size, amount of soil and water Hardness.
ŸUse WARM or HOT water for normal soil.ŸDifferent Water Temperature may be required according to
soil type. (refer to page 10)ŸReduce load size.ŸWash with JEAN or SOAK & JEAN Wash cycle for heavy
soiled laundry.ŸSeparate heavily soiled items from lightly soiled ones.ŸPretreat stain and heavy soil according to directions shown
on page 9.
ŸRub the stain with bar soap. Wash.ŸDo not overfill fabric softener dispenser and do not pour
liquid fabric softener directly onto fabric. See page 12 for more instructions.
ŸKeep the recommendations against Scrub (waxy buildup) (refer to page 12)
ŸUse correct amount of Detergent for load size, amount of soil and water Hardness
ŸTo restore discolored load of Whites, use rust remover safe for fabric
ŸInstall non precipitating water softener or an iron filter in your water supply system for an ongoing problem.
ŸBefore washing, run water for a few minutes to clear lines.
ŸWash lint givers eg towels, flannelette sheets, separately from lint collectors eg synthetic fabrics and remove tissues in pockets before wash. See page 9 for sorting and caring before loading.
ŸDo not overload the Washer
ŸDo not overload the washer.ŸSome Detergents need to be pre-dissolved, check the
Detergent Instructions, Try pre-dissolving the Detergent.ŸIncrease Water Temperature using HOT Water safe for
fabric.ŸUse proper amount of Detergent.
ŸNever pour chlorine bleach directly on fabric. See page 11 for adding liquid bleach.ŸFasten zippers, hooks, and buckles.ŸRemove objects in pockets. See page 9 for caring before
loading.ŸDo not overload the washer.
Problems Possible Causes Solutions & Preventive Measures
Co
mm
on
Wa
sh
Pro
ble
ms Common Wash Problem
20
Tro
ub
lesh
oo
tin
g When the washer is in trouble, please contact authorized EcoStar Service Center. Customer should not dismantle
the machine without permission.
List of faults and inspection
If the washer can not work normally, or appear abnormity or alarms, please check and correct as follows.
Note: During the de spin process, if washing are piled at one side of the spin barrel, it will cause unbalance of spin
barrel resulting in striking. At this moment, the computer inside the washer will feel this unbalance phenomenon and
will automatically correct it ( fill in water Washing ). However, if unbalance situation is not removed after continuous three
corrections, which means the computer auto-correction can not resolve the problem. Then the user has to manually and
evenly place the clothing inside the barrel to solve the problem.
If the water drain hose is placed very high.
If the end of water drain hose is sealed in pond.
If the internal rubber ring of drain valve is blocked by dirt.
Inspection ItemsFaults
No Water
Flows In
If the power is off or the fuse is burnt out.
If the water supply is cut off or the water pressure is too low.
If the inlet hose is properly connected and the water tap is opened.
If the filtering screen of inlet valve is blocked by dirt.
If the coil of inlet valve is damaged. (The slight electromagnetic sound is normal
phenomenon when the inlet valve is switched on)
If the "Start / Pause" button is pressed after the power switch is pressed.
No Washing
Abnormal Draining
Abnormal Spin
If the door lid is closed.
If all clothing piled largely at one side of barrel or the clothing is excessively placed.
If the washer is not placed in stable condition or it is placed in inclination state. (The ground
is not flat).
If the motor belt is loosened.
If the power is off or the fuse is burnt out.
If the power supply voltage is too low.
If the water amount reaches to the required water level. (The washer will not work if the water
amount does not reach the required water level)
If it is set to "Delay" washing mode. (It will only start to work until the reservation time
reached)
Troubleshooting
21
When the washer is in trouble, please contact Authorized EcoStar Service Center. Customer should not dismantle the machine without permission and warranty will be considered voided..
If the washer cannot work normally, and abnormal indication or error codes are shown on LED Digits dial or machine will make buzzer alarm for warning. Please check the error codes and take corrective actions as show below:
Fault Indication
Alarm for water inlet
Water injection for about 16 minutes, but do not reach the preset water level
flares
Alarm for lid opening
Ÿ
Ÿ
Ÿ
Open the lid after starting the delay time. Open the lid when Washer is spinning. Open the lid when entering into the child lock state.
flares
Imbalance alarm
Checked imbalance of washing drum for third time by the computer but could not balance the spinning.
flares
Drain alarm Alarm for water drain time out.
flares
Overflow alarm
After the water reaching the preset water level, water injection dosent cease.
flares
Alarm buzzing sound
The buzzer goes on
buzzing for 10 seconds. If the fault is not solved,
buzzes again for 10 seconds in
every 6 minutes
Stopping the alarm
Open the lid to deal with faults, then close the lid to stop the
alarm
Error Message
Please refer to EcoStar Washing Machine Warranty Card for complete address and phone numbers of Authorized Service Center within your city
Note:
Mal
fun
ctio
n D
isp
lay
& S
ou
lutio
ns
Malfunction Display and Solutions
22
* In our continuing effort to improve the quality of our appliances, it may be necessary to make changes to the
appliances without revising this manual.
340W
220V - 240V ~ 50 Hz
Rated Input Power
Water pressure inlet
Power Supply
Model
Weight
Net Dimensions (mm)
0.1Mpa ~ 0.6Mpa
6 Kg
WM06-700
515 * 525 * 920
Net Weight (Kg) 31
SpecificationsS
pec
ific
atio
n
23
Program Wash Time Rinse Times Spin Time Total Time
12 Minutes Two Times 5 Minutes 42 Minutes
6 Minutes One Time 3 Minutes 19 Minutes
Two Times 5 Minutes 54 MinutesSoak 10 MinutesWash 12 Minutes
Two Times 1 Minute 41 Minutes
Two Times 1 Minute 35 Minutes
60 Minutes 60 Minutes__ __
Normal
Quick
Jeans
Silk
Air Dry
Anti-Wrinkle
Note:
The total time included the time of entering water and the drain time. It can affect the total time that is the pressure of the tap water in your family and the drain speed.
Below is the procedure of full automatic wash program:
Soak 13 Minutes
Wash 6 Minutes
9 Minutes
Default Program TimersD
efau
lt P
rog
ram
Tim
ers
24