wire rigging systems

DIVIDER INSERT HERE:

wire rigging systems

wire rigging systems wire rig

gin

gsystem

s

93Online catalogue: www.anzor.co.nz/arch

WIRE RIGGING SYSTEMS

• Wire sizes: 3mm - 6mm.

• Wire types: 1x19, 7x7, 7x19.

• Wire types: Anzor 316 wire.

• Application: a wide variety of applications including horizontal wire, roof plane (criss cross bracing), and hanging vertically applications.

• Economical option.

SWAGE STuD AT EAcH END


S7801 RH Swage Stud: page 98

High tensile rods systems

Multiple annealing stages during the drawing process to ensure wire does not work harden, and finished by passing through an ultrasonic bath to remove any impurities that may have attached during manufacture. This makes Hamma cable unique in raising ultimate corrosion resistance for extreme harsh and severe local conditions as well as increased work life due to the multiple annealing processes, ensuring longevity of the wire. Hamma cables are ensured of superior aesthetic finish due to an excellent surface brightness and smooth exterior.

Strudyna is proud to offer Hamma cables as part of Strudyna's tensile cable systems. Hamma cables are developed exclusively for high tensile performances through unique techniques that differentiate from other manufactures. Hamma cables start with the highest quality of stainless steel source follow by unique descaling of stainless steel rod to remove impurities, which may have attached during transport, prior to commencing production.

HAMMA MEGA-STRANDBenefits - Designed for large structural projects. To date this is the largest

stainless steel strand on the market.

Material : 316 Stainless SteelSizes : 20mm - 42mm.Finish : Bright and smooth for increased corrosion resistance.

Specific features: - Low stretch. - Higher comparative breaking strain. - Wide cable size range. - Compatible with both splicing and swaging. - Good corrosion resistance.

HAMMA X-STRANDBenefits - Enhanced corrosion resistance. Produced with a high level of descaling and ultrasonic removal of impurities. Resulting in longer lasting shine and ultimate corrosion resistance, better for NZ’s harsh corrosive conditions.

Material : 316 Stainless SteelSizes : 0.8mm - 19mmTypes : 1x19 (rigid), 7x7 (semi-flexible), 7x19 (flexible)Finish:Bright and smooth for increased corrosion resistance.

Types:1x19 (rigid), 7x7 (semi-flexible), 7x19 (flexible)

HAMMA PRO-STRAND

Benefits - Built with Micro Stretch Technology (MST), the Minimum BreakingStrength (MBS) is 20-30% higher than conventional 1x19 wire of thesame size. This means that you can downsize the structural cable and maintain the strength. This results in improved aesthetics, less weight in the structure, and cost savings on smaller fittings, which can be significant on large projects.

Material

: :

316 Stainless SteelSizes:

TypesCompact wire strand in constructions 1x7, 1x19, 1x25

1.6mm - 12mmFinish

:

Bright and smooth for increased corrosion resistance.

Application:Predominantly used for structural cables, e.g glass facades

Specific features: - Extremely non-flexible.

- High breaking strain.

- Smooth clean finish.

- No pre-stress required.

- Extremely low stretch.

1x197x77x19

1x19

1x371x61

with Micro-stretch Technologies.

1x7

with Ultimate Structural cable

Application:Large structural projects, such as bridges.

Application:Balustrades, shade sails, foliage trellises, and architectural rigging. Recommended for exterior use in coastal areas.

Types:A conventional 1x37 and 1x61 construction wire stand.

Code:MFW...U

Maintenance:Wire rope must be cleaned & maintained regularly.See our Maintenance & Cleaning guidelines on p.21.

Wire Rope in 316 or 316 Ultra: page 104

+ +S7801 LH Swage Stud:

page 98

S3121/5 Toggle/Swage Turnbuckle to tension wire: page 95

S7805 Swage Toggle Terminal: page 97

+

• Wire sizes: 2.5mm - 10mm.


• Wire material: 316 or 316 Ultra.

• Swaging: hex swaged (by hand tool) or roll swaged.

• Application: suited for membrane structures or shade sails subject to dynamic forces.

ToGGlE TuRNBucKlE











HAMMA PRO-STRAND


Material

: :



1.6mm - 12mmFinish

:








1x197x77x19

1x19

1x371x61


1x7





Code:MFW...U



+

S3121P Jaw/Swage Turnbuckle to tension wire: page 96

S7803 Swage Fork Terminal: page 97

• Wire sizes: 2.5mm - 10mm.


• Wire material: 316 or 316 Ultra.

• Swaging: hex swaged (by hand tool) or roll swaged.

• Application: suited for static applications e.g. flag poles, balustrades, staircases, and straight line installations.

JAW TuRNBucKlE











HAMMA PRO-STRAND


Material

: :



1.6mm - 12mmFinish

:








1x197x77x19

1x19

1x371x61


1x7





Code:MFW...U



+ +

Online catalogue: www.anzor.co.nz/wire-rigging

94


P2H Adjuster Unitpage 101


• Wire material: 316 stainless steel.• Wire type: HAMMA Pro-Strand or Mega-Strand.

• Applications: membrane structures, glass facades, structural cabling (e.g. pedestrian bridges).

• Installation: Wire can be tensioned from one end.

P2H ADJuSTER - WITH HAMMA HIGH TENSIlE HAMMA WIRE

P2H Adjuster Unit to tension wire: page 101

HAMMA High Tensile 316 Wire - page 104











HAMMA PRO-STRAND


Material

: :



1.6mm - 12mmFinish

:








1x197x77x19

1x19

1x371x61


1x7





Code:MFW...U


+ +

RDS RH Adjuster Unit:page 100


• Wire material: 316 stainless steel.• Wire type: Anzor 316 wire.

• Applications: used in a criss cross formation in an bracing application.

• Installation: Not for the faint of heart. Wire has to be turned simultaneously from both ends to tension.

RDS FoRK + PBI SWAGE STuD

RDS LH Adjuster Unit: page 100

+ +

S7803 Swage Fork Terminal: page 99

S7801 RH Swage Stud: page 99



• Wire types: Anzor 316 wire.

• Application: horizontal wire, roof plane (criss cross bracing) and vertically hanging applications with the swage fork visible.

SWAGE FoRK TERMINAl + SWAGE STuD

+ +











HAMMA PRO-STRAND


Material

: :



1.6mm - 12mmFinish

:








1x197x77x19

1x19

1x371x61


1x7





Code:MFW...U













HAMMA PRO-STRAND


Material

: :



1.6mm - 12mmFinish

:








1x197x77x19

1x19

1x371x61


1x7





Code:MFW...U





A toggle end is the preferred choice for membrane structures as it can move in two directions.

Online catalogue: www.anzor.co.nz/wire-riggingInformation used exclusively under permission of Strudyna Co. Ltd

M

L1

L

OD

Safe working load - Standard safety factor for working load is 25% of Breaking Load

codeSize M (mm)

Wire Ø (mm)

l (mm)

l1 (mm)

oD (mm)

AccessoryBreaking load

(kgs)

MFTBPTSM605 M5 2.5* 155 80 5.5 Ring 600

MFTBPTSM606 M6 3.0* 172 90 6.3 Ring 1,000

MFTBPTSM608 M8 4.0* 210 105 7.5 Ring 1,400

MFTBPTSM610 M10 5.0 246 125 9.1 Ring 2,200

MFTBPTSM612 M12 6.0 296 150 12.5 Ring 4,000

MFTBPTSM616 M16 8.0 386 190 16.1 Cotter pin 6,500

MFTBPTSM620 M20 10.0 422 210 17.8 Cotter pin 8,500

S3121/5 Technical Features• Wire sizes: 2.5mm - 10mm.

• Material: 316 Stainless Steel.

• Application: suited to membrane structures subject to dynamic forces.

• Swaging: hex swaged (by hand tool) for 2.5, 3.0 & 4.0mm* wire, or alternatively roll swaged by a professional rigger.

ToGGlE/SWAGE TuRNBucKlES

EX-STocK SuBJEcT To PRIoR

SAlE

S3121/5 ToGGlE/SWAGE TuRNBucKlE

Hand tool for swaging 5.0mm wire available on request. NB: There may be a lead time.

96

codeSize M (mm)

Wire Ø (mm)

l (mm)

l1 (mm)

oD (mm)


(KGS)

MFTBPJSMM605 M5 mini 3.0* 107 50 - Ring 750

MFTBPJSMM606 M6 mini 4.0* 133 60 - Ring 1,200

MFTBPJSM605 M5 2.5* 150 80 5.5 Ring 600

MFTBPJSM606 M6 3.0* 170 90 6.3 Ring 1,000

MFTBPJSM608 M8 4.0* 205 105 7.5 Ring 1,400

MFTBPJSM610 M10 5.0 240 125 9.1 Ring 2,200

MFTBPJSM612 M12 6.0 295 150 12.5 Ring 4,000

MFTBPJSM616 M16 8.0 370 190 16.1 Cotter pin 6,500


S3121P JAW/SWAGE TuRNBucKlE

L1

L

M

OD

OD

A jaw end is rigid and suited to `straight-line’ applications where the wire rig isn’t subject to significant external forces E.g. It is suited to flag poles, but not suited to shade sails.

S3121/5 Technical Features• Wire sizes: 2.5mm - 8mm.

• Material: 316 Stainless Steel.• Application: Suited to static applications

E.g. balustrades, staircases, flag poles and straight line installations.

• Swaging: hex swaged (by hand tool) for 2.5, 3.0 & 4.0mm* wire, or alternatively roll swaged by a professional rigger.

Information used exclusively under permission of Strudyna Co. Ltd

S3121P WITH THREADED STuD INTo coNcRETESEE P.50 FoR DETAIlS

JAW/SWAGE TuRNBucKlES


EX-STocK

SuBJEcT

To PRIoR SAlE

Hand tool for swaging 5.0mm wire available on request. NB: There may be a lead time.


S7805 - ToGGlE/SWAGE TERMINAl


S7803 - FoRK/SWAGE TERMINAl

codeWire Ø (mm)

A(mm)

B (mm)

D (mm)

F(mm)

l (mm)


(KGS)

MFSWTT603 3.0 6 7 6.35 3.30 3.30 Ring 670

MFSWTT604 4.0 8 10 7.54 4.30 4.30 Ring 1,400

MFSWTT605 5.0 9 12 9.12 5.30 5.30 Ring 1,700

MFSWTT606 6.0 12 13 12.54 6.35 6.35 Ring 4,000

MFSWTT608 8.0 16 17 16.13 8.40 8.40 Cotter pin 7,000

MFSWTT610 10.0 19 20 17.85 10.50 10.50 Cotter pin 7,500


codeWire Ø (mm)

A(mm)

B (mm)

D (mm)

F(mm)

l (mm)

l1 (mm)


(KGS)

MFSWFT4025 2.5 5.00 7.0 5.53 2.70 62.0 35 Ring 700

MFSWFT403 3.0 6.00 8.0 6.35 3.30 68.0 38 Ring 1,250

MFSWFT404 4.0 8.00 11.0 7.54 4.30 77.0 45 Ring 1,800

MFSWFT405 5.0 9.00 12.0 9.12 5.30 87.0 51 Ring 2,650

MFSWFT406 6.0 12.00 14.5 12.54 6.35 109.0 64 Ring 4,000

MFSWFT408 8.0 14.28 15.0 16.13 8.40 148.0 80 Cotter pin 6,500

A

L

L1

F

D

BA

AB

A

L

F

D

SWAGE TERMINAlS


EX-STocK

SuBJEcT

To PRIoR SAlE

EX-STocK

SuBJEcT

To PRIoR SAlE

98



Pin-to-PinMiddle adjustment

Ø Wire

WireS7801 lH Swage Stud S7801 RH Swage Stud

Technical Features• A low cost, wire tensioning system, without the cost of a

turnbuckle. Hex nuts at each end perform the tensioning.


• Wire: Anzor 316 wire (p.105) or 316 Ultra wire (p.106)

• Application: Suited to static applications e.g. staircases and straight line installations.

• Swaging: hex swaged (by hand tool) for 3.0 & 4.0mm* wire, or alternatively roll swaged by a professional rigger.

Hand tool for swaging 5.0mm wire available on request. NB: there may be a lead time.

codeWire Ø(mm)

Adjustment +/-

Thread M(mm)

l(mm)

l1(mm)

l2(mm)

oD(mm)

MFSWS4W03.0M05 3.0 80mm M5 80 32 40 6.3

MFSWS4W03M06 3.0 96mm M6 97 38 48 6.3

MFSWS4W04M06 4.0 96mm M6 110 45 48 7.5

MFSWS4W04M08 4.0 108mm M8 115 45 54 7.5

MFSWS4W05M10 5.0 122mm M10 128 52 61 9.1

MFSWS4W06M12 6.0 158mm M12 162 63 79 12.5

S7801 SWAGE STuD

L1 L2

MOD

L

ANzoR 316 1X19 WIRE


Multiple annealing stages during the drawing process to ensure wire does not work harden, and finished by passing through an ultrasonic bath to remove any impuritie s that may have attached during manufacture . This makes Hamma cable unique in raising ultimate corrosion resistance for extreme harsh and severe local conditions as well as increased work life due to the multiple annealing processes, ensuring longevity of the wire. Hamma cables are ensured of superior aesthetic finish due to an excellent surface brightness and smooth exterior.

Strudyna is proud to offer Hamma cables as part of Strudyna's tensile cable systems. Hamma cables are developed exclusivel y for high tensile performances through unique techniques that differentiate from other manufactures. Hamma cables start with the highest quality of stainless steel source follow by unique descaling of stainless steel rod to remove impurities, which may have attached during transport, prior to commencing production.






Material : 316 Stainless SteelSizes : 0.8mm - 19mmTypes : 1x19 (rigid), 7x7 (semi-flexible), 7x19 (flexible)Finish : Bright and smooth for increased corrosion resistance.

Types : 1x19 (rigid), 7x7 (semi-flexible), 7x19 (flexible)

HAMMA PRO-STRAND


Material

: :

316 Stainless SteelSizes :

Types Compact wire strand in constructions 1x7, 1x19, 1x25

1.6mm - 12mmFinish

:


Application: Predominantly used for structural cables, e.g glass facades






1x19 7x7 7x19

1x19

1x37 1x61


1x7


Application: Large structural projects, such as bridges.

Application: Balustrades, shade sails, foliage trellises, and architectural rigging. Recommended for exterior use in coastal areas.

Types : A conventional 1x37 and 1x61 construction wire stand.

Code: MFW...U

Maintenance: Wire rope must be cleaned & maintained regularly.See our Maintenance & Cleaning guidelines on p.21.











HAMMA PRO-STRAND


Material

: :



1.6mm - 12mmFinish

:








1x19 7x7 7x19

1x19

1x37 1x61


1x7





Code: MFW...U


Wire characteristics & breaking loads - please see p.105

Page 105

One hex nut is supplied per stud for tensioning the wire.

Adjust by tightening the hex nuts at each end.

Steel channel or similar - supplied by others.

Nylon isolating washer with a stainless washer (sold separately)and hex nut.

Tighten hex nut to tension wire.

INSTAllATIoN



EX-STocK

SuBJEcT

To PRIoR SAlE


SWAGE FoRK TERMINAl + SWAGE STuD


WireS7803 Fork Terminal S7801 Swage Stud

Ø Wire

SWAGE FoRK TERMINAl + STuD

Technical Features• Low cost, simple wire rigging system.


• Wire: Anzor 316 wire (p.105) or 316 Ultra wire (p.106)

• Application: Suited to static applications e.g. balustrades, staircases and straight line installations.

• Swaging: hex swaged (by hand tool) for 3.0 & 4.0mm* wire, or alternatively roll swaged by a professional rigger.

Hand tool for swaging 5.0mm wire available on request. NB: there may be a lead time.

ANzoR 316 1X19 WIRE

Wire characteristics & breaking loads - see p.105

for dimensions & breaking loads.

S7803 FoRK TERMINAl

See p.97

See p.98 for installation details.

INSTAllATIoNTighten hex nut to tension wire.












HAMMA PRO-STRAND


Material

: :



1.6mm - 12mmFinish

:








1x19 7x7 7x19

1x19

1x37 1x61


1x7





Code: MFW...U












HAMMA PRO-STRAND


Material

: :



1.6mm - 12mmFinish

:








1x19 7x7 7x19

1x19

1x37 1x61


1x7





Code: MFW...U


Page 105

codeWire Ø(mm)

Adjustment +/-

Thread M(mm)

l(mm)

l1(mm)

l2(mm)

oD(mm)

MFSWS4W03.0M05 3.0 40mm M5 80 32 40 6.3

MFSWS4W03M06 3.0 48mm M6 97 38 48 6.3

MFSWS4W04M06 4.0 48mm M6 110 45 48 7.5

MFSWS4W04M08 4.0 57mm M8 115 45 54 7.5

MFSWS4W05M10 5.0 61mm M10 128 52 61 9.1

MFSWS4W06M12 6.0 79mm M12 162 63 79 12.5

S7801 RH SWAGE STuD

L1 L2

MOD

L

One hex nut is supplied per stud for tensioning the wire.

EX-STocK SuBJEcT To PRIoR

SAlE

100

RoD DYNAMIc SWAGE SYSTEM

RDS cABlE SYSTEMRDS ADJuSTABlE FoRK + PBI SWAGE STuD

RDS cable System Technical Features

• Attractive look as the threads are hidden.

• Made from passivated 316 Stainless Steel for enhanced

corrosion resistance.

• Installation: not for the faint of heart. Full cable must be

turned by two people, one at each end.

Recommended for advanced installers only.

• Wire: Anzor 316 Ultra wire - page 106.

We recommend applying Loctite 243 to the pin, washer & screw set for permanent fixture.

locTITE 243


WireRDS Fork (p.76) PBI Swage StudØ Wire

For full RDS Fork technical details, Breaking loads and coupling Plates - see p.79 - 84.

Fork + Stud Size Wire Ø(mm)

Wire type Adjustment+/-

MBl*(kN)

3/8” UNF 5.0 1x19 19mm 18

1/2” UNF 6.0 1x19 30mm 26

5/8” UNF 8.0 1x19 35mm 47

MAINTENANcE & clEANINGRegular maintenance and cleaning is required to maintain appearance.See p.21 for Anzor’s Cleaning & Maintenance Guide.

THREADS MuST BE luBRIcATED WITH NIcKEl ANTI SEIzETo PREVENT GAllING

Tension by turning both swage terminals simultaneously.



ANzoR 316 ulTRA WIRE











HAMMA PRO-STRAND


Material

: :



1.6mm - 12mmFinish

:








1x19 7x7 7x19

1x19

1x37 1x61


1x7





Code: MFW...U












HAMMA PRO-STRAND


Material

: :



1.6mm - 12mmFinish

:








1x19 7x7 7x19

1x19

1x37 1x61


1x7





Code: MFW...U


Wire characteristics & breaking loads - please see p.106

6

EX-STocK

SuBJEcT

To PRIoR SAlE

*Minimum Breaking load (MBl) - after swaging minimum breaking load of cable assembly.

*For information on Safe Working Loads, go to p.105.

101Online catalogue: www.anzor.co.nz/wire-rigging

P2H ADJuSTER - ARcHITEcTuRAllY DESIGNED WIRE TENSIoNING SYSTEM

AVAIlABlE

To oRDER

Delivery approx

4 Months

P2H Adjuster Technical Features

• For cable diameter: 8mm – 42mm.

• Made from passivated 316 Stainless Steel for enhanced

corrosion resistance.

• Installation - special P2H tools required.

• Dynamic load bearing design with double end adjustment.

• Wire: HAMMA wire - page 107 & 108.

Copyright © 2011 Strudyna

• High quality tensioning unit for cable.

• Designed for performance and aesthetic appeal.

• Threads are hidden for enhanced aesthetic appeal.

• The double locking nut system offers good security to counter external dynamic and resonance forces.

• Due to the its unique internal adjustment system, the wire can be tensioned by turning just one end adjuster only, without turning the entire cable.


P2H ADJuSTER

Pin

P2H - Fork

Lock Nut for Ex-socket

Lock Nut forIn-Socket

Swage Terminal

Tension by turning the “In-Socket” only.

A “HIGH END” ARcHITEcTuRAllY DESIGNED FITTING

102

P2H ADJuSTER - technical information

P2H Precautions• Always select the correct cable based on the load requirement.

• Do not overload the cable above its designed Safe Working Load.

• Never use the P2H adjuster for lifting purposes.

• Cable assembly should not be tensioned while under load and should always be used in a straight line. Separate tensioning is required with hydraulic equipment. See our website or contact us for full installation procedures.

• Use nickel anti-seize to prevent the system galling.

Cable Length

P2H Adjuster P2H Adjuster

P2H ADJuSTER

MAINTENANcE & clEANINGRegular maintenance and cleaning is required to maintain appearance.See p.21 for Anzor’s Cleaning & Maintenance Guide.

For installation guide and toolsplease contact one of our architectural product managers

or visit www.anzor.co.nz/arch/p2h

We recommend applying Loctite 243 to the pin, washer & screw set for permanent fixture.

locTITE 243

THREADS MuST BE luBRIcATED WITH NIcKEl ANTI SEIzE To PREVENT GAllING

cable Ø(mm)

Adjustment(+/-)

Min cable length

(mm)

l1 (mm)

Pin to Pin

8.0 40mm 836 182 1,200

10.0 40mm 964 218 1,400

12.0 40mm 1,164 218 1,600

14.0 56mm 1,372 264 1,900

16.0 56mm 1,572 264 2,100

19.0 60mm 1,872 314 2,500

20.0 60mm 1,972 314 2,600

Cable Length + (L1x2)

cable Ø(mm)

Adjustment(+/-)

Min cable length

(mm)

l1 (mm)

Pin to Pin

22.0 60mm 2,136 332 2,800

24.0 64mm 2,320 340 3,000

28.0 64mm 2,700 350 3,400

30.0 70mm 2,890 405 3,700

34.0 80mm 3,288 456 4,200

36.0 80mm 3,390 455 4,300

42.0 100mm 4,388 606 5,600

Cable Length + (L1x2)

Ø cable

L +

Figures described above are not under tension.

l1 l1




P2H ADJuSTER - cable information


Ø cable

P2H Adjuster P2H AdjustercableØD

A












HAMMA PRO-STRAND


Material

: :



1.6mm - 12mmFinish

:








1x19 7x7 7x19

1x19

1x37 1x61


1x7





Code: MFW...U












HAMMA PRO-STRAND


Material

: :



1.6mm - 12mmFinish

:








1x19 7x7 7x19

1x19

1x37 1x61


1x7





Code: MFW...U


HAMMA PRo-STRAND

Page 107











HAMMA PRO-STRAND


Material

: :



1.6mm - 12mmFinish

:








1x19 7x7 7x19

1x19

1x37 1x61


1x7





Code: MFW...U












HAMMA PRO-STRAND


Material

: :



1.6mm - 12mmFinish

:








1x19 7x7 7x19

1x19

1x37 1x61


1x7





Code: MFW...U


HAMMA MEGA-STRAND

Page 108

Wire Ø(mm)

A(mm)

Wire type

ØD(mm)

Min+/-

Min Breaking load* (kN)

8.0 18 1x19 16 40mm 47

10.0 20 1x19 20 40mm 74

12.0 20 1x19 22 40mm 106

14.0 21 1x19 24 56mm 145

16.0 24 1x19 27 56mm 180

19.0 30 1x19 33 60mm 267

P2H ADJuSTER












HAMMA PRO-STRAND


Material

: :



1.6mm - 12mmFinish

:








1x19 7x7 7x19

1x19

1x37 1x61


1x7





Code: MFW...U












HAMMA PRO-STRAND


Material

: :



1.6mm - 12mmFinish

:








1x19 7x7 7x19

1x19

1x37 1x61


1x7





Code: MFW...U


Page 106

*Minimum Breaking load (MBl) - after swaging minimum breaking load of cable assembly.

*Refer to p.105 for our guidelines on Safe Working loads.

cable Ø(mm)

A(mm)

Wire type

ØD(mm)

Min+/-


8.0 18 1x19 16 40mm 57

10.0 20 1x19 20 40mm 90

12.0 20 1x19 22 40mm 127

14.0 21 1x25 24 56mm 170

16.0 24 1x25 27 56mm 225

19.0 30 1x25 33 60mm 282

cable Ø(mm)

A(mm)

Wire type

ØD(mm)

Min+/-


20.0 30 1x37 33 60mm 279

22.0 34 1x37 42 60mm 341

24.0 34 1x37 42 64mm 410

28.0 40 1x37 45 64mm 561

30.0 40 1x61 52 70mm 695

34.0 48 1x61 56 80mm 849

36.0 48 1x61 56 80mm 870

42.0 56 1x61 60 100mm 1,008

104











HAMMA PRO-STRAND


Material

: :



1.6mm - 12mmFinish

:








1x19 7x7 7x19

1x19

1x37 1x61


1x7





Code: MFW...U












HAMMA PRO-STRAND


Material

: :



1.6mm - 12mmFinish

:








1x19 7x7 7x19

1x19

1x37 1x61


1x7





Code: MFW...U


Page 105











HAMMA PRO-STRAND


Material

: :



1.6mm - 12mmFinish

:








1x19 7x7 7x19

1x19

1x37 1x61


1x7





Code: MFW...U


-

Wide range of sizes and configurations.

Material : 316 Stainless Steel.Size : 1mm - 10mm.Types : 1x19 (rigid), 7x7 (semi-flexible), 7x19 (flexible).

- Economical pricing.Benefits

Application: Balustrades, shade sails, foliage trellises, and architectural rigging.

Code: MFW...

Material Test Certs available on request with order.

Maintenance: Wire rope must be cleaned & maintained regularly.

See our Maintenance & Cleaning guidelines on p.21.

ANzoR 316 WIRE


Page 106

WIRE TYPES











HAMMA PRO-STRAND


Material

: :



1.6mm - 12mmFinish

:








1x19 7x7 7x19

1x19

1x37 1x61


1x7





Code: MFW...U












HAMMA PRO-STRAND


Material

: :



1.6mm - 12mmFinish

:








1x19 7x7 7x19

1x19

1x37 1x61


1x7





Code: MFW...U


HAMMA PRo-STRAND

Page 107











HAMMA PRO-STRAND


Material

: :



1.6mm - 12mmFinish

:








1x19 7x7 7x19

1x19

1x37 1x61


1x7





Code: MFW...U












HAMMA PRO-STRAND


Material

: :



1.6mm - 12mmFinish

:








1x19 7x7 7x19

1x19

1x37 1x61


1x7





Code: MFW...U


HAMMA MEGA-STRAND











HAMMA PRO-STRAND


Material

: :



1.6mm - 12mmFinish

:








1x19 7x7 7x19

1x19

1x37 1x61


1x7





Code: MFW...U


Page 108

0.8

1x19

0.31

53

0.52

1.0

1x19

0.49

84

0.82

1.2

3/64”

1x19

0.71

121

1.19

1.5

1x19

1.11

189

1.85

1.6

1/16”

1x19

1.27

215

2.11

2

5/64”

1x19

1.98

336

3.3

2.4

3/32”

1x19

2.84

483

4.74

2.5

1x19

3.09

525

5.15

3

1x19

4.45

756

7.41

3.2

1/8”

1x19

5.06

861

8.44

3.5

1x19

6.06

1,030

10.1

4

5/32”

1x19

7.88

1,340

13.14

4.5

1x19

10.01

1,702

16.69

4.8

3/16”

1x19

11.39

1,935

18.98

5

1x19

12.39

2,100

20.59

6

1x19

3,030

29.71

5.5

7/32”

1x19

2,639

25.88

6.4

1/4”

1x19

3,442

33.75

7

1x19

4,120

40.4

7.2

9/32”

1x19

4,357

42.73

8

5/16”

1x19

5,380

52.76

9.6

3/8”

1x19

7,746

75.96

10

1x19

8,400

82.38

11.1

7/16”

1x19

10,574

103.7

12

1x19

12,102

118.68

12.7

1/2”

1x19

13,555

132.93

14

1x19

16,473

161.54

14.3

9/16”

1x19

17,186

168.54

16

5/8”

1x19

20,500

201.04

19

1x19

30,300

297.14


20

1x37

197.40

31,713

311

22

1x37

240.60

38,647

379

24.3

1x37

274.32

46,499

456

28

1x37

375.72

63,630

624

30

1x61

465.78

78,824

773

34

1x61

568.56

96,261

944

36

1x61

601.98

98,606

967

42

1x61

672.00

114,208

1,120

Extreme Condition Gear

Ultimate Structural cable

METRIC

INCH

Construction

Limit Tension* (kN)

min.BreakingLoad*

(Kgf)

(kN)

METRIC

INCH

Construction

Limit Tension* (kN)

min.BreakingLoad

(Kgf)

(kN)

METRIC

INCH

Construction

min.BreakingLoad

(Kgf)

(kN)

METRIC

INCH

Construction

Limit Tension (kN)

min.BreakingLoad*

(Kgf)

(kN)

*ZR,D DIN 18800

Micro-stretch Technologies

14.0

1x25

113.586

19,300

189.27

12.0

1x19

84.73

14,400

141.22

2.0

5/64”

1x7

2.60

450

4.41

2.5

1x7

4.06

700

6.86

3.0

1x7

5.88

1,025

10.05

4.0

5/32”

1x7

10.47

1,795

17.60

5.0

1x19

14.36

2,600

25.50

6.0

1x19

20.89

3,700

36.28

7.0

1x19

28.89

5,100

50.01

8.0

5/16”

1x19

36.19

6,500

63.74

9.0

3/8”

1x19

46.48

9,000

88.26

10.0

7/16”

1x19

57.49

10,250

100.52

11.0

1x19

71.20

13,500

132.39

16.0

1x25

150.63

25,600

251.05

19.0

1x25

188.29

32,000

313.81

1x7

0.8

1x19

0.31

53

0.52

1.0

1x19

0.49

84

0.82

1.2

3/64”

1x19

0.71

121

1.19

1.5

1x19

1.11

189

1.85

1.6

1/16”

1x19

1.27

215

2.11

2

5/64”

1x19

1.98

336

3.3

2.4

3/32”

1x19

2.84

483

4.74

2.5

1x19

3.09

525

5.15

3

1x19

4.45

756

7.41

3.2

1/8”

1x19

5.06

861

8.44

3.5

1x19

6.06

1,030

10.1

4

5/32”

1x19

7.88

1,340

13.14

4.5

1x19

10.01

1,702

16.69

4.8

3/16”

1x19

11.39

1,935

18.98

5

1x19

12.39

2,100

20.59

6

1x19

3,030

29.71

5.5

7/32”

1x19

2,639

25.88

6.4

1/4”

1x19

3,442

33.75

7

1x19

4,120

40.4

7.2

9/32”

1x19

4,357

42.73

8

5/16”

1x19

5,380

52.76

9.6

3/8”

1x19

7,746

75.96

10

1x19

8,400

82.38

11.1

7/16”

1x19

10,574

103.7

12

1x19

12,102

118.68

12.7

1/2”

1x19

13,555

132.93

14

1x19

16,473

161.54

14.3

9/16”

1x19

17,186

168.54

16

5/8”

1x19

20,500

201.04

19

1x19

30,300

297.14


20

1x37

197.40

31,713

311

22

1x37

240.60

38,647

379

24.3

1x37

274.32

46,499

456

28

1x37

375.72

63,630

624

30

1x61

465.78

78,824

773

34

1x61

568.56

96,261

944

36

1x61

601.98

98,606

967

42

1x61

672.00

114,208

1,120



METRIC

INCH

Construction

Limit Tension* (kN)

min.BreakingLoad*

(Kgf)

(kN)

METRIC

INCH

Construction

Limit Tension* (kN)

min.BreakingLoad

(Kgf)

(kN)

METRIC

INCH

Construction

min.BreakingLoad

(Kgf)

(kN)

METRIC

INCH

Construction

Limit Tension (kN)

min.BreakingLoad*

(Kgf)

(kN)

*ZR,D DIN 18800


14.0

1x25

113.586

19,300

189.27

12.0

1x19

84.73

14,400

141.22

2.0

5/64”

1x7

2.60

450

4.41

2.5

1x7

4.06

700

6.86

3.0

1x7

5.88

1,025

10.05

4.0

5/32”

1x7

10.47

1,795

17.60

5.0

1x19

14.36

2,600

25.50

6.0

1x19

20.89

3,700

36.28

7.0

1x19

28.89

5,100

50.01

8.0

5/16”

1x19

36.19

6,500

63.74

9.0

3/8”

1x19

46.48

9,000

88.26

10.0

7/16”

1x19

57.49

10,250

100.52

11.0

1x19

71.20

13,500

132.39

16.0

1x25

150.63

25,600

251.05

19.0

1x25

188.29

32,000

313.81

1x19 1x25

0.8

1x19

0.31

53

0.52

1.0

1x19

0.49

84

0.82

1.2

3/64”

1x19

0.71

121

1.19

1.5

1x19

1.11

189

1.85

1.6

1/16”

1x19

1.27

215

2.11

2

5/64”

1x19

1.98

336

3.3

2.4

3/32”

1x19

2.84

483

4.74

2.5

1x19

3.09

525

5.15

3

1x19

4.45

756

7.41

3.2

1/8”

1x19

5.06

861

8.44

3.5

1x19

6.06

1,030

10.1

4

5/32”

1x19

7.88

1,340

13.14

4.5

1x19

10.01

1,702

16.69

4.8

3/16”

1x19

11.39

1,935

18.98

5

1x19

12.39

2,100

20.59

6

1x19

3,030

29.71

5.5

7/32”

1x19

2,639

25.88

6.4

1/4”

1x19

3,442

33.75

7

1x19

4,120

40.4

7.2

9/32”

1x19

4,357

42.73

8

5/16”

1x19

5,380

52.76

9.6

3/8”

1x19

7,746

75.96

10

1x19

8,400

82.38

11.1

7/16”

1x19

10,574

103.7

12

1x19

12,102

118.68

12.7

1/2”

1x19

13,555

132.93

14

1x19

16,473

161.54

14.3

9/16”

1x19

17,186

168.54

16

5/8”

1x19

20,500

201.04

19

1x19

30,300

297.14


20

1x37

197.40

31,713

311

22

1x37

240.60

38,647

379

24.3

1x37

274.32

46,499

456

28

1x37

375.72

63,630

624

30

1x61

465.78

78,824

773

34

1x61

568.56

96,261

944

36

1x61

601.98

98,606

967

42

1x61

672.00

114,208

1,120



METRIC

INCH

Construction

Limit Tension* (kN)

min.BreakingLoad*

(Kgf)

(kN)

METRIC

INCH

Construction

Limit Tension* (kN)

min.BreakingLoad

(Kgf)

(kN)

METRIC

INCH

Construction

min.BreakingLoad

(Kgf)

(kN)

METRIC

INCH

Construction

Limit Tension (kN)

min.BreakingLoad*

(Kgf)

(kN)

*ZR,D DIN 18800


14.0

1x25

113.586

19,300

189.27

12.0

1x19

84.73

14,400

141.22

2.0

5/64”

1x7

2.60

450

4.41

2.5

1x7

4.06

700

6.86

3.0

1x7

5.88

1,025

10.05

4.0

5/32”

1x7

10.47

1,795

17.60

5.0

1x19

14.36

2,600

25.50

6.0

1x19

20.89

3,700

36.28

7.0

1x19

28.89

5,100

50.01

8.0

5/16”

1x19

36.19

6,500

63.74

9.0

3/8”

1x19

46.48

9,000

88.26

10.0

7/16”

1x19

57.49

10,250

100.52

11.0

1x19

71.20

13,500

132.39

16.0

1x25

150.63

25,600

251.05

19.0

1x25

188.29

32,000

313.81

WIRE TYPES

Online catalogue: www.anzor.co.nz/wire


ANzoR 316 WIRE

Anzor 316 - Wire











HAMMA PRO-STRAND


Material

: :



1.6mm - 12mmFinish

:








1x19 7x7 7x19

1x19

1x37 1x61


1x7





Code: MFW...U












HAMMA PRO-STRAND


Material

: :



1.6mm - 12mmFinish

:








1x19 7x7 7x19

1x19

1x37 1x61


1x7





Code: MFW...U


Wire Rope SizeBreaking

loadcharacteristics

2.0 mm2.5 mm3.0 mm 4.0 mm 5.0 mm 6.0 mm 8.0 mm

340 kg500 kg720 kg

1,285 kg 2,000kg2,876 kg 4,640 kg

- Rigid, non-flexible, low stretch - ideal in straight lines.

- Higher comparative breaking strain.

- Fewer crevices, traps less dirt, therefore less likely to `tea-stain’.

- Commonly used with swage fittings.

1.0 mm1.5 mm2.0 mm2.5 mm

60 kg122 kg235 kg428 kg

- Semi-flexible.

- Low-medium stretch.

- Medium breaking strain.

- Can be terminated with crimps, or can also be swaged.

2.0 mm2.5 mm3.0 mm 4.0 mm 5.0 mm 6.0 mm 8.0 mm

10.0 mm

230 kg380 kg540 kg 950 kg

1,490 kg 1,910 kg3,400 kg5,310 kg

- Very flexible.

- Medium stretch.

- Medium-low breaking strain.

- Can be terminated with crimps, or can also be swaged.

- More crevices so higher risk of to tea-staining.

- Hardest to clean.

1x19











HAMMA PRO-STRAND


Material

: :



1.6mm - 12mmFinish

:








1x19 7x7 7x19

1x19

1x37 1x61


1x7





Code: MFW...U


-

Wide range of sizes and configurations.

Material : 316 Stainless Steel.Size : 1mm - 10mm.Types : 1x19 (rigid), 7x7 (semi-flexible), 7x19 (flexible).

- Economical pricing.Benefits

Application: Balustrades, shade sails, foliage trellises, and architectural rigging.

Code: MFW...

Material Test Certs available on request with order.

Maintenance: Wire rope must be cleaned & maintained regularly.

See our Maintenance & Cleaning guidelines on p.21.

1x19 7x7 7x19

1x19 7x7 7x19

Safe Working load - to determine the safe working load of a wire rope or cable, the nominal strength or Minimum Breaking Load (MBL) must be reduced by a safety factor. The MBL of a wire rope should be considered the straight line pull which will actually break the wire. The nominal strength or MBL of a wire rope should never be used as its working load.

The safety factor is the ratio of strength of the rope or strand to the working load required. It is impossible toestablish a uniform safety factor as it will depend upon the type of work performed, government regulations,loads applied, speed of operation, length of wire rope used, etc. As a guideline, designers/installers commonly use a the Safe Working Load of 25% of Breaking Load, allowing for a 4:1 safety factor.

It is the customer’s responsibility to ensure that an appropriate safety factor has been applied to the MBL to calculate the safe working load of the wire rope being specified or ordered. We suggest that you engage a consulting engineer to assist you. Anzor takes no responsibility for the final decision, and accepts no liability in the case where loss arises from the safety factor chosen.

Cleaning & Maintenance

is required.See p.21

ANzoR 316 WIRE RoPE

EX-STocK

SuBJEcT

To PRIoR SAlE

106

Wire RopeSize *Breaking

load (Kg)

0.8 mm1.0 mm1.5 mm2.0 mm2.5 mm3.0 mm 3.5 mm4.0 mm 4.5 mm5.0 mm 6.0 mm 7.0 mm8.0 mm10.0 mm12.0 mm14.0 mm16.0 mm19.0 mm

5384

189336525756

1,0301,3401,7022,1003,0304,1205,3808,400

12,10216,47320,50030,300

0.8 mm1.0 mm1.5 mm2.0 mm2.5 mm3.0 mm 3.5 mm4.0 mm 4.5 mm

3859

145258374581 733

1,030 1,312











HAMMA PRO-STRAND


Material

: :



1.6mm - 12mmFinish

:








1x19 7x7 7x19

1x19

1x37 1x61


1x7





Code: MFW...U



HIGHlIGHTED SIzES IN STocK.

oTHERS AVAIlABlE

oN REQuEST.











HAMMA PRO-STRAND


Material

: :



1.6mm - 12mmFinish

:








1x19 7x7 7x19

1x19

1x37 1x61


1x7





Code: MFW...U


Anzor 316 - ultra Wire

7x7











HAMMA PRO-STRAND


Material

: :



1.6mm - 12mmFinish

:








1x19 7x7 7x19

1x19

1x37 1x61


1x7





Code: MFW...U












HAMMA PRO-STRAND


Material

: :



1.6mm - 12mmFinish

:








1x19 7x7 7x19

1x19

1x37 1x61


1x7





Code: MFW...U


Higher corrosion resistance than standard 316 wire, due to the wire undergoing additional treatments.

refer to p92 for characteristics

Wire RopeSize *Breaking

load (Kg)

5.0 mm 6.0 mm 7.0 mm8.0 mm10.0 mm12.0 mm14.0 mm16.0 mm18.0 mm

1,620 2,320 3,160 3,670 5,750 8,270

11,200 14,700 21,000

1.0 mm1.5 mm2.0 mm2.5 mm3.0 mm 3.5 mm4.0 mm 4.5 mm5.0 mm 6.0 mm 7.0 mm8.0 mm10.0 mm12.0 mm14.0 mm16.0 mm18.0 mm20.0 mm

59 134239373538731956

1,206 1,490 2,150 2,930 3,400 5,310 7,650

10,400 13,600 19,30023,900











HAMMA PRO-STRAND


Material

: :



1.6mm - 12mmFinish

:








1x19 7x7 7x19

1x19

1x37 1x61


1x7





Code: MFW...U












HAMMA PRO-STRAND


Material

: :



1.6mm - 12mmFinish

:








1x19 7x7 7x19

1x19

1x37 1x61


1x7





Code: MFW...U


*Refer to p.105 for our guidelines on Safe Working loads.

Cleaning &

Maintenance

is required.

See p.21

ANzoR 316 ulTRA WIRE RoPE

Online catalogue: www.anzor.co.nz/wire

107Online catalogue: www.anzor.co.nz/wire

0.8

1x19

0.31

53

0.52

1.0

1x19

0.49

84

0.82

1.2

3/64”

1x19

0.71

121

1.19

1.5

1x19

1.11

189

1.85

1.6

1/16”

1x19

1.27

215

2.11

2

5/64”

1x19

1.98

336

3.3

2.4

3/32”

1x19

2.84

483

4.74

2.5

1x19

3.09

525

5.15

3

1x19

4.45

756

7.41

3.2

1/8”

1x19

5.06

861

8.44

3.5

1x19

6.06

1,030

10.1

4

5/32”

1x19

7.88

1,340

13.14

4.5

1x19

10.01

1,702

16.69

4.8

3/16”

1x19

11.39

1,935

18.98

5

1x19

12.39

2,100

20.59

6

1x19

3,030

29.71

5.5

7/32”

1x19

2,639

25.88

6.4

1/4”

1x19

3,442

33.75

7

1x19

4,120

40.4

7.2

9/32”

1x19

4,357

42.73

8

5/16”

1x19

5,380

52.76

9.6

3/8”

1x19

7,746

75.96

10

1x19

8,400

82.38

11.1

7/16”

1x19

10,574

103.7

12

1x19

12,102

118.68

12.7

1/2”

1x19

13,555

132.93

14

1x19

16,473

161.54

14.3

9/16”

1x19

17,186

168.54

16

5/8”

1x19

20,500

201.04

19

1x19

30,300

297.14


20

1x37

197.40

31,713

311

22

1x37

240.60

38,647

379

24.3

1x37

274.32

46,499

456

28

1x37

375.72

63,630

624

30

1x61

465.78

78,824

773

34

1x61

568.56

96,261

944

36

1x61

601.98

98,606

967

42

1x61

672.00

114,208

1,120



METRIC

INCH

Construction

Limit Tension* (kN)

min.BreakingLoad*

(Kgf)

(kN)

METRIC

INCH

Construction

Limit Tension* (kN)

min.BreakingLoad

(Kgf)

(kN)

METRIC

INCH

Construction

min.BreakingLoad

(Kgf)

(kN)

METRIC

INCH

Construction

Limit Tension (kN)

min.BreakingLoad*

(Kgf)

(kN)

*ZR,D DIN 18800


14.0

1x25

113.586

19,300

189.27

12.0

1x19

84.73

14,400

141.22

2.0

5/64”

1x7

2.60

450

4.41

2.5

1x7

4.06

700

6.86

3.0

1x7

5.88

1,025

10.05

4.0

5/32”

1x7

10.47

1,795

17.60

5.0

1x19

14.36

2,600

25.50

6.0

1x19

20.89

3,700

36.28

7.0

1x19

28.89

5,100

50.01

8.0

5/16”

1x19

36.19

6,500

63.74

9.0

3/8”

1x19

46.48

9,000

88.26

10.0

7/16”

1x19

57.49

10,250

100.52

11.0

1x19

71.20

13,500

132.39

16.0

1x25

150.63

25,600

251.05

19.0

1x25

188.29

32,000

313.81











HAMMA PRO-STRAND


Material

: :



1.6mm - 12mmFinish

:








1x19 7x7 7x19

1x19

1x37 1x61


1x7





Code: MFW...U












HAMMA PRO-STRAND


Material

: :



1.6mm - 12mmFinish

:








1x19 7x7 7x19

1x19

1x37 1x61


1x7





Code: MFW...U


Copyright © 2011 Strudyna Information used exclusively under permission of Strudyna Co. Ltd

AVAIlABlE To oRDER

Delivery approx 4 Weeks

0.8

1x19

0.31

53

0.52

1.0

1x19

0.49

84

0.82

1.2

3/64”

1x19

0.71

121

1.19

1.5

1x19

1.11

189

1.85

1.6

1/16”

1x19

1.27

215

2.11

2

5/64”

1x19

1.98

336

3.3

2.4

3/32”

1x19

2.84

483

4.74

2.5

1x19

3.09

525

5.15

3

1x19

4.45

756

7.41

3.2

1/8”

1x19

5.06

861

8.44

3.5

1x19

6.06

1,030

10.1

4

5/32”

1x19

7.88

1,340

13.14

4.5

1x19

10.01

1,702

16.69

4.8

3/16”

1x19

11.39

1,935

18.98

5

1x19

12.39

2,100

20.59

6

1x19

3,030

29.71

5.5

7/32”

1x19

2,639

25.88

6.4

1/4”

1x19

3,442

33.75

7

1x19

4,120

40.4

7.2

9/32”

1x19

4,357

42.73

8

5/16”

1x19

5,380

52.76

9.6

3/8”

1x19

7,746

75.96

10

1x19

8,400

82.38

11.1

7/16”

1x19

10,574

103.7

12

1x19

12,102

118.68

12.7

1/2”

1x19

13,555

132.93

14

1x19

16,473

161.54

14.3

9/16”

1x19

17,186

168.54

16

5/8”

1x19

20,500

201.04

19

1x19

30,300

297.14


20

1x37

197.40

31,713

311

22

1x37

240.60

38,647

379

24.3

1x37

274.32

46,499

456

28

1x37

375.72

63,630

624

30

1x61

465.78

78,824

773

34

1x61

568.56

96,261

944

36

1x61

601.98

98,606

967

42

1x61

672.00

114,208

1,120



METRIC

INCH

Construction

Limit Tension* (kN)

min.BreakingLoad*

(Kgf)

(kN)

METRIC

INCH

Construction

Limit Tension* (kN)

min.BreakingLoad

(Kgf)

(kN)

METRIC

INCH

Construction

min.BreakingLoad

(Kgf)

(kN)

METRIC

INCH

Construction

Limit Tension (kN)

min.BreakingLoad*

(Kgf)

(kN)

*ZR,D DIN 18800


14.0

1x25

113.586

19,300

189.27

12.0

1x19

84.73

14,400

141.22

2.0

5/64”

1x7

2.60

450

4.41

2.5

1x7

4.06

700

6.86

3.0

1x7

5.88

1,025

10.05

4.0

5/32”

1x7

10.47

1,795

17.60

5.0

1x19

14.36

2,600

25.50

6.0

1x19

20.89

3,700

36.28

7.0

1x19

28.89

5,100

50.01

8.0

5/16”

1x19

36.19

6,500

63.74

9.0

3/8”

1x19

46.48

9,000

88.26

10.0

7/16”

1x19

57.49

10,250

100.52

11.0

1x19

71.20

13,500

132.39

16.0

1x25

150.63

25,600

251.05

19.0

1x25

188.29

32,000

313.81

1x7

0.8

1x19

0.31

53

0.52

1.0

1x19

0.49

84

0.82

1.2

3/64”

1x19

0.71

121

1.19

1.5

1x19

1.11

189

1.85

1.6

1/16”

1x19

1.27

215

2.11

2

5/64”

1x19

1.98

336

3.3

2.4

3/32”

1x19

2.84

483

4.74

2.5

1x19

3.09

525

5.15

3

1x19

4.45

756

7.41

3.2

1/8”

1x19

5.06

861

8.44

3.5

1x19

6.06

1,030

10.1

4

5/32”

1x19

7.88

1,340

13.14

4.5

1x19

10.01

1,702

16.69

4.8

3/16”

1x19

11.39

1,935

18.98

5

1x19

12.39

2,100

20.59

6

1x19

3,030

29.71

5.5

7/32”

1x19

2,639

25.88

6.4

1/4”

1x19

3,442

33.75

7

1x19

4,120

40.4

7.2

9/32”

1x19

4,357

42.73

8

5/16”

1x19

5,380

52.76

9.6

3/8”

1x19

7,746

75.96

10

1x19

8,400

82.38

11.1

7/16”

1x19

10,574

103.7

12

1x19

12,102

118.68

12.7

1/2”

1x19

13,555

132.93

14

1x19

16,473

161.54

14.3

9/16”

1x19

17,186

168.54

16

5/8”

1x19

20,500

201.04

19

1x19

30,300

297.14


20

1x37

197.40

31,713

311

22

1x37

240.60

38,647

379

24.3

1x37

274.32

46,499

456

28

1x37

375.72

63,630

624

30

1x61

465.78

78,824

773

34

1x61

568.56

96,261

944

36

1x61

601.98

98,606

967

42

1x61

672.00

114,208

1,120



METRIC

INCH

Construction

Limit Tension* (kN)

min.BreakingLoad*

(Kgf)

(kN)

METRIC

INCH

Construction

Limit Tension* (kN)

min.BreakingLoad

(Kgf)

(kN)

METRIC

INCH

Construction

min.BreakingLoad

(Kgf)

(kN)

METRIC

INCH

Construction

Limit Tension (kN)

min.BreakingLoad*

(Kgf)

(kN)

*ZR,D DIN 18800


14.0

1x25

113.586

19,300

189.27

12.0

1x19

84.73

14,400

141.22

2.0

5/64”

1x7

2.60

450

4.41

2.5

1x7

4.06

700

6.86

3.0

1x7

5.88

1,025

10.05

4.0

5/32”

1x7

10.47

1,795

17.60

5.0

1x19

14.36

2,600

25.50

6.0

1x19

20.89

3,700

36.28

7.0

1x19

28.89

5,100

50.01

8.0

5/16”

1x19

36.19

6,500

63.74

9.0

3/8”

1x19

46.48

9,000

88.26

10.0

7/16”

1x19

57.49

10,250

100.52

11.0

1x19

71.20

13,500

132.39

16.0

1x25

150.63

25,600

251.05

19.0

1x25

188.29

32,000

313.81

1x19 1x25

0.8

1x19

0.31

53

0.52

1.0

1x19

0.49

84

0.82

1.2

3/64”

1x19

0.71

121

1.19

1.5

1x19

1.11

189

1.85

1.6

1/16”

1x19

1.27

215

2.11

2

5/64”

1x19

1.98

336

3.3

2.4

3/32”

1x19

2.84

483

4.74

2.5

1x19

3.09

525

5.15

3

1x19

4.45

756

7.41

3.2

1/8”

1x19

5.06

861

8.44

3.5

1x19

6.06

1,030

10.1

4

5/32”

1x19

7.88

1,340

13.14

4.5

1x19

10.01

1,702

16.69

4.8

3/16”

1x19

11.39

1,935

18.98

5

1x19

12.39

2,100

20.59

6

1x19

3,030

29.71

5.5

7/32”

1x19

2,639

25.88

6.4

1/4”

1x19

3,442

33.75

7

1x19

4,120

40.4

7.2

9/32”

1x19

4,357

42.73

8

5/16”

1x19

5,380

52.76

9.6

3/8”

1x19

7,746

75.96

10

1x19

8,400

82.38

11.1

7/16”

1x19

10,574

103.7

12

1x19

12,102

118.68

12.7

1/2”

1x19

13,555

132.93

14

1x19

16,473

161.54

14.3

9/16”

1x19

17,186

168.54

16

5/8”

1x19

20,500

201.04

19

1x19

30,300

297.14


20

1x37

197.40

31,713

311

22

1x37

240.60

38,647

379

24.3

1x37

274.32

46,499

456

28

1x37

375.72

63,630

624

30

1x61

465.78

78,824

773

34

1x61

568.56

96,261

944

36

1x61

601.98

98,606

967

42

1x61

672.00

114,208

1,120



METRIC

INCH

Construction

Limit Tension* (kN)

min.BreakingLoad*

(Kgf)

(kN)

METRIC

INCH

Construction

Limit Tension* (kN)

min.BreakingLoad

(Kgf)

(kN)

METRIC

INCH

Construction

min.BreakingLoad

(Kgf)

(kN)

METRIC

INCH

Construction

Limit Tension (kN)

min.BreakingLoad*

(Kgf)

(kN)

*ZR,D DIN 18800


14.0

1x25

113.586

19,300

189.27

12.0

1x19

84.73

14,400

141.22

2.0

5/64”

1x7

2.60

450

4.41

2.5

1x7

4.06

700

6.86

3.0

1x7

5.88

1,025

10.05

4.0

5/32”

1x7

10.47

1,795

17.60

5.0

1x19

14.36

2,600

25.50

6.0

1x19

20.89

3,700

36.28

7.0

1x19

28.89

5,100

50.01

8.0

5/16”

1x19

36.19

6,500

63.74

9.0

3/8”

1x19

46.48

9,000

88.26

10.0

7/16”

1x19

57.49

10,250

100.52

11.0

1x19

71.20

13,500

132.39

16.0

1x25

150.63

25,600

251.05

19.0

1x25

188.29

32,000

313.81

HAMMA PRo-STRAND

HAMMA 316 HIGH TENSIlE cABlE

0.8

1x19

0.31

53

0.52

1.0

1x19

0.49

84

0.82

1.2

3/64”

1x19

0.71

121

1.19

1.5

1x19

1.11

189

1.85

1.6

1/16”

1x19

1.27

215

2.11

2

5/64”

1x19

1.98

336

3.3

2.4

3/32”

1x19

2.84

483

4.74

2.5

1x19

3.09

525

5.15

3

1x19

4.45

756

7.41

3.2

1/8”

1x19

5.06

861

8.44

3.5

1x19

6.06

1,030

10.1

4

5/32”

1x19

7.88

1,340

13.14

4.5

1x19

10.01

1,702

16.69

4.8

3/16”

1x19

11.39

1,935

18.98

5

1x19

12.39

2,100

20.59

6

1x19

3,030

29.71

5.5

7/32”

1x19

2,639

25.88

6.4

1/4”

1x19

3,442

33.75

7

1x19

4,120

40.4

7.2

9/32”

1x19

4,357

42.73

8

5/16”

1x19

5,380

52.76

9.6

3/8”

1x19

7,746

75.96

10

1x19

8,400

82.38

11.1

7/16”

1x19

10,574

103.7

12

1x19

12,102

118.68

12.7

1/2”

1x19

13,555

132.93

14

1x19

16,473

161.54

14.3

9/16”

1x19

17,186

168.54

16

5/8”

1x19

20,500

201.04

19

1x19

30,300

297.14


20

1x37

197.40

31,713

311

22

1x37

240.60

38,647

379

24.3

1x37

274.32

46,499

456

28

1x37

375.72

63,630

624

30

1x61

465.78

78,824

773

34

1x61

568.56

96,261

944

36

1x61

601.98

98,606

967

42

1x61

672.00

114,208

1,120



METRIC

INCH

Construction

Limit Tension* (kN)

min.BreakingLoad*

(Kgf)

(kN)

METRIC

INCH

Construction

Limit Tension* (kN)

min.BreakingLoad

(Kgf)

(kN)

METRIC

INCH

Construction

min.BreakingLoad

(Kgf)

(kN)

METRIC

INCH

Construction

Limit Tension (kN)

min.BreakingLoad*

(Kgf)

(kN)

*ZR,D DIN 18800


14.0

1x25

113.586

19,300

189.27

12.0

1x19

84.73

14,400

141.22

2.0

5/64”

1x7

2.60

450

4.41

2.5

1x7

4.06

700

6.86

3.0

1x7

5.88

1,025

10.05

4.0

5/32”

1x7

10.47

1,795

17.60

5.0

1x19

14.36

2,600

25.50

6.0

1x19

20.89

3,700

36.28

7.0

1x19

28.89

5,100

50.01

8.0

5/16”

1x19

36.19

6,500

63.74

9.0

3/8”

1x19

46.48

9,000

88.26

10.0

7/16”

1x19

57.49

10,250

100.52

11.0

1x19

71.20

13,500

132.39

16.0

1x25

150.63

25,600

251.05

19.0

1x25

188.29

32,000

313.81


108Online catalogue: www.anzor.co.nz/wire-rigging

0.8

1x19

0.31

53

0.52

1.0

1x19

0.49

84

0.82

1.2

3/64”

1x19

0.71

121

1.19

1.5

1x19

1.11

189

1.85

1.6

1/16”

1x19

1.27

215

2.11

2

5/64”

1x19

1.98

336

3.3

2.4

3/32”

1x19

2.84

483

4.74

2.5

1x19

3.09

525

5.15

3

1x19

4.45

756

7.41

3.2

1/8”

1x19

5.06

861

8.44

3.5

1x19

6.06

1,030

10.1

4

5/32”

1x19

7.88

1,340

13.14

4.5

1x19

10.01

1,702

16.69

4.8

3/16”

1x19

11.39

1,935

18.98

5

1x19

12.39

2,100

20.59

6

1x19

3,030

29.71

5.5

7/32”

1x19

2,639

25.88

6.4

1/4”

1x19

3,442

33.75

7

1x19

4,120

40.4

7.2

9/32”

1x19

4,357

42.73

8

5/16”

1x19

5,380

52.76

9.6

3/8”

1x19

7,746

75.96

10

1x19

8,400

82.38

11.1

7/16”

1x19

10,574

103.7

12

1x19

12,102

118.68

12.7

1/2”

1x19

13,555

132.93

14

1x19

16,473

161.54

14.3

9/16”

1x19

17,186

168.54

16

5/8”

1x19

20,500

201.04

19

1x19

30,300

297.14


20

1x37

197.40

31,713

311

22

1x37

240.60

38,647

379

24.3

1x37

274.32

46,499

456

28

1x37

375.72

63,630

624

30

1x61

465.78

78,824

773

34

1x61

568.56

96,261

944

36

1x61

601.98

98,606

967

42

1x61

672.00

114,208

1,120



METRIC

INCH

Construction

Limit Tension* (kN)

min.BreakingLoad*

(Kgf)

(kN)

METRIC

INCH

Construction

Limit Tension* (kN)

min.BreakingLoad

(Kgf)

(kN)

METRIC

INCH

Construction

min.BreakingLoad

(Kgf)

(kN)

METRIC

INCH

Construction

Limit Tension (kN)

min.BreakingLoad*

(Kgf)

(kN)

*ZR,D DIN 18800


14.0

1x25

113.586

19,300

189.27

12.0

1x19

84.73

14,400

141.22

2.0

5/64”

1x7

2.60

450

4.41

2.5

1x7

4.06

700

6.86

3.0

1x7

5.88

1,025

10.05

4.0

5/32”

1x7

10.47

1,795

17.60

5.0

1x19

14.36

2,600

25.50

6.0

1x19

20.89

3,700

36.28

7.0

1x19

28.89

5,100

50.01

8.0

5/16”

1x19

36.19

6,500

63.74

9.0

3/8”

1x19

46.48

9,000

88.26

10.0

7/16”

1x19

57.49

10,250

100.52

11.0

1x19

71.20

13,500

132.39

16.0

1x25

150.63

25,600

251.05

19.0

1x25

188.29

32,000

313.81











HAMMA PRO-STRAND


Material

: :



1.6mm - 12mmFinish

:








1x19 7x7 7x19

1x19

1x37 1x61


1x7





Code: MFW...U












HAMMA PRO-STRAND


Material

: :



1.6mm - 12mmFinish

:








1x19 7x7 7x19

1x19

1x37 1x61


1x7





Code: MFW...U


HAMMA MEGA-STRAND











HAMMA PRO-STRAND


Material

: :



1.6mm - 12mmFinish

:








1x19 7x7 7x19

1x19

1x37 1x61


1x7





Code: MFW...U


HAMMA 316 HIGH TENSIlE cABlE

Copyright © 2011 StrudynaInformation used exclusively under permission of Strudyna Co. Ltd

AVAIlABlE To oRDER

Delivery approx 4 Weeks

0.8

1x19

0.31

53

0.52

1.0

1x19

0.49

84

0.82

1.2

3/64”

1x19

0.71

121

1.19

1.5

1x19

1.11

189

1.85

1.6

1/16”

1x19

1.27

215

2.11

2

5/64”

1x19

1.98

336

3.3

2.4

3/32”

1x19

2.84

483

4.74

2.5

1x19

3.09

525

5.15

3

1x19

4.45

756

7.41

3.2

1/8”

1x19

5.06

861

8.44

3.5

1x19

6.06

1,030

10.1

4

5/32”

1x19

7.88

1,340

13.14

4.5

1x19

10.01

1,702

16.69

4.8

3/16”

1x19

11.39

1,935

18.98

5

1x19

12.39

2,100

20.59

6

1x19

3,030

29.71

5.5

7/32”

1x19

2,639

25.88

6.4

1/4”

1x19

3,442

33.75

7

1x19

4,120

40.4

7.2

9/32”

1x19

4,357

42.73

8

5/16”

1x19

5,380

52.76

9.6

3/8”

1x19

7,746

75.96

10

1x19

8,400

82.38

11.1

7/16”

1x19

10,574

103.7

12

1x19

12,102

118.68

12.7

1/2”

1x19

13,555

132.93

14

1x19

16,473

161.54

14.3

9/16”

1x19

17,186

168.54

16

5/8”

1x19

20,500

201.04

19

1x19

30,300

297.14


20

1x37

197.40

31,713

311

22

1x37

240.60

38,647

379

24.3

1x37

274.32

46,499

456

28

1x37

375.72

63,630

624

30

1x61

465.78

78,824

773

34

1x61

568.56

96,261

944

36

1x61

601.98

98,606

967

42

1x61

672.00

114,208

1,120



METRIC

INCH

Construction

Limit Tension* (kN)

min.BreakingLoad*

(Kgf)

(kN)

METRIC

INCH

Construction

Limit Tension* (kN)

min.BreakingLoad

(Kgf)

(kN)

METRIC

INCH

Construction

min.BreakingLoad

(Kgf)

(kN)

METRIC

INCH

Construction

Limit Tension (kN)

min.BreakingLoad*

(Kgf)

(kN)

*ZR,D DIN 18800


14.0

1x25

113.586

19,300

189.27

12.0

1x19

84.73

14,400

141.22

2.0

5/64”

1x7

2.60

450

4.41

2.5

1x7

4.06

700

6.86

3.0

1x7

5.88

1,025

10.05

4.0

5/32”

1x7

10.47

1,795

17.60

5.0

1x19

14.36

2,600

25.50

6.0

1x19

20.89

3,700

36.28

7.0

1x19

28.89

5,100

50.01

8.0

5/16”

1x19

36.19

6,500

63.74

9.0

3/8”

1x19

46.48

9,000

88.26

10.0

7/16”

1x19

57.49

10,250

100.52

11.0

1x19

71.20

13,500

132.39

16.0

1x25

150.63

25,600

251.05

19.0

1x25

188.29

32,000

313.81


wire rigging systems

Documents

wire types

increased corrosion

horizontal wire

hamma cables

ultimate corrosion resistance

enhanced corrosion resistance

good corrosion resistance

rigging systems wire