wire preparation equipment - te connectivity: … · technical data application discrete wires ......

TE APPLICATION TOOLING /// WIRE PREPARATION EQUIPMENT

Wire Preparation Equipment

ENHANCE YOUR WIRE PROCESSING EFFICIENCY

TE APPLICATION TOOLING /// WIRE PREPARATION EQUIPMENT PAGE 2

WIRE PREPARATION EQUIPMENT

Application Tooling and Equipment PortfolioEnabling our customers to make the wire preparation

process as effective as possible, TE Connectivity (TE)

provides you with high-performance and operator

friendly equipment. Due to the enhanced, innovative

technique, high and precise production solutions can

be achieved.

Our tooling portfolio covers almost all processing

requirements. We offer processing solutions for both

standard, as well as the specialized stripping and

cutting challenges of demanding insulation materials.

You can draw from a full range of add-on modules

to allow your system to grow right along with your

requirements for optimum flexibility and reliable

process control!

Your local representative will be happy to advise on

equipment that meets your production challenges.


Table of Contents Page

Cutting Machines

• Iota 330 4

Stripping Machines

• Cosmic 32M and Cosmic 32M CDD 5

• AT-FE 0400 Stripping Machine 6

• MIRA 230 7

• Cosmic 927R, Cosmic 927RX

and Cosmic 927RX-W 8

Jacket Stripping Machines

• Cosmic 60R, Cosmic 60R-W and

Cosmic 60R-L 9

Coaxial Wire Stripping Machine

• Cosmic 42R Coaxial Stripping Machine 10

• Cosmic 48R and Cosmic 48RX 11

Cutting and Stripping Machines

• Kappa 310 12

• Kappa 315 12

• Kappa 320 13

• Kappa 322 13

• Kappa 330 14

• Kappa 331 U/Coax 14

• Kappa 350 15

Kappa Cutting and Stripping Machines 16 Application Samples/Overview 18


Iota 330 Wire Cutting MachineProduct Features

• Ease of operation

• 5 Hard keys for main functions combined

with touch panel

• For broad variety of materials

• For diameter up to 16 mm

• For width up to 82 mm

• High productivity parallel processing

of up to 4 products

• Precise and smooth handling of product

• Cutting blade shut height precisely adjusted to

product dimensions

• Adjustable contact pressure

• Monitored length measuring as an option


Wire cross section 0.13 – 35 mm2 (AWG 26 – AWG 2)

Insulation diameter16 mm (.63 in) max. 25 mm (.98 in) in the center of the belt drive unit

Flat ribbon cable dimensions max. width 82 mm (3.23 in)

Feed speed 1.7 m/sec

Noise level < 70 dB

Electrical supply 115/230 V +/- 10 %, 50/60 Hz, 230 VA

Compressed air supply 4 – 6 bar

Interfaces 2 x IOCS, 1 x Encoder Out, 1 x Ethernet

Weight app. 38 kg (84 lb)

Machine Dimensions (W x H x D) 510 x 385 x 525 mm (21 x 16 x 21 in)

Technical Data

In case of doubt, we recommend that you have samples made with your wire before making a purchase.

* EMEA only


Cosmic 32M and Cosmic 32M CDD with Integrated Quality Check Faster, more precise and more powerful.

The Cosmic 32M is a high-speed electric wire stripper.

Achieving higher precision, more power, and a wider

AWG range, all in quicker cycle time than its prede-

cessor. It is equipped with digital stripping diameter

display and sensitive wire-tip touch sensor.

The Cosmic 32M CDD machine is equipped in addition

with a conductor damage detector that checks for

conductor damage.

Product Features

• Operates anywhere in the world with

AC 100 V – 240 V compatibility

• Digitally displays stripping diameter

• Easily switches full / partial strip

• 0.3 s quick cycle time

• Wide strip range of AWG 12 – 32

• Compact, easy-to-handle benchtop model

Technical Data

ApplicationDiscrete wires Stranded wires Inner conductors of multicore wires

Cross. section area 0.03 – 3.3 mm2 (AWG 32 – 12)

Max. insulation diameter 0.6 – 4 mm (0.02 – 0.16 in)

Stripping length 1 – 25 mm (0.04 – 1 in)

Pull off length 2 – 25 mm (0.08 – 1 in)

Form and Number of blades V-blades

Min. free length of cable JacketL + stripping length L depends on gripper type:Standard: L = 14 mm (0.6 in), Thin: L = 7 mm (0.3 in)

Weight 4.5 kg (10 pounds)

Machine Dimensions (L x W x H) 77 x 175 x 348 mm (25.5 x 29.5 x 16.7 in)



AT-FE 0400 Stripping Machine The strip box is an electric driven machine to strip

standard PVC (polyvinylchlorid) wires up to an outside

diameter of 4.2 mm.

Due to the low weight the AT-FE 0400 machine can be

placed on nearly every workplace and only requires an

electrical suppy.

Product Features

• Electrically driven

• Simple adjustment

• Easy handling

• Stepping switch for manual operation

• Small space required practically maintenance-free

• Cuts cleanly through the insulation due to the design

of 4 special cutting blades

• Manual adjustment for wire size and stripping length

Technical Data



ApplicationDiscrete wires Stranded wires Inner conductors of multicore wires

Cross. section area0.25 – 2.5 mm2 (AWG 22 – 14)Optional 0.05 – 0.14 mm2 (AWG 30 – 26)

Max. insulation diameter – 4.2 mm (– 0.17 in)

Stripping length 1.5 – 10 mm (0.06 – 0.39 in)

Pull off length continuously adjustable

Form and Number of blades 4 blade system

Min. free length of cable Jacket12.5 mm + stripping length(0.49 in + stripping length)

Weight 6.7 kg (14.77 pounds)


* EMEA only



Application

Discrete wires Stranded wires Inner conductors of multicore wiresSequence processing

Cross. section area 0.03 mm² - 8 mm² (AWG 32 - 8)

Max. insulation diameter 6.5 mm (0.256 in)

Stripping length 1.5 to 46 mm (0.06–1.81 in)

Max. wire cross section for cutting 2 mm² / AWG 14 / ø 1.6 mm (ø0.063 in)

Pull off length 0.01 – 46 mm (0.0004–1.81 in)

Form and Number of blades V-Blades, 2

Min. insertion depth with standard grippers 11 mm (0.43 in)

Weight 11kg (24 lb)

Machine Dimensions (WxHxD) 141 x 290 x 473 mm (5.5 × 11.4 × 18.6 in)


MIRA 230 Machine for multi-conductor processing

Largest processing range in its class• Sturdily built to accommodate high cutting and

stripping forces

• Large processing range up to 8 mm2/AWG 8

• Unique scope of functions, including sequence

processing

Maximum productivity

• Multi-conductor processing in a single pass

• Fast access to frequently used functions

• Function to call up stored articles for production

Reproducible quality

• Production based on verified data stored in the

library

• Password-protected access to the settings

• Integrated air jet for automatic blade cleaning

Technical Data

Smart design

• Smartphone-like navigation for quick learning

progress

• Ergonomic design to optimize work position

• Helpful controls for fast, easy entry of parameter


Cosmic 927R, Cosmic 927RX and Cosmic 927RX-WL

Rotary Wire Stripping Machines Ultramodern technology has been developed into a precision micro-cable stripping machine

The Cosmic 927R machine was designed and

developed to reliably strip various insulation materials

and micro-cable.

From conductor diameter AWG 36 to 10 (0.11 mm to

3.5 mm), the stripping diameter display can be set to

within 0.1 mm increments.

The Cosmic 927RX shares the features of the Cosmic

927R but is recommended for hard to strip insulations.

The Cosmic 927RX-WL shares the features of the

Cosmic 927R but is recommended for longer stripping

length up to 100 mm.

Technical Data


ApplicationCosmic 927R Discrete wiresJacket of multicore wires

Cosmic 927RXFor thin and hard-tostripwires, can apply a higherstripping force

Cosmic 927RX-WLStripping length up to100 mm

Cross. section area 0.013 – 6 (AWG 36 – 10)

Max. insulation diameter 0.25 – 5.3 mm (0.01 – 02 in)

Stripping length 1 – 25 mm (0.04 – 1 in) in)1.5 – 100 mm (0.06 – 3.9 in)

Pull off length 2 – 25 (0.8 – 1 in)

Form and Number of blades

2 carbiderotating blades

4 tool steel rotatingblades, optional carbide blades

2 carbiderotating blades

Machine Dimensions (L x W x H)

241 x 230 x 640 mm(9.5 x 9.1 x 25.2 in)

241 x 230 x 640 mm(9.5 x 9.1 x 25.2 in)

241 x 230 x 640 mm(9.5 x 9.1 x 25.2 in)

Minimal insert length L(Multi-wire cables with outside diameter < 7,5 mm/0,3 in.

L + stripping lengthL depends on gripper type: Standard: x = 12 mm/0.5 in,

Thin: x = 10 mm/0.4 in.Thin+flat: x = 7 mm/0.28 in

Weight 8.4 kg (18.5 pounds

Machine DimensionsL x W x H

131 x 218 x 400 mm (5.16 x 8.6 x 15.75 in)

Product Features

• For most wire types, optimized to maximize

stripping quality

• Can be selected to twist with clockwise/counter-

clockwise or non-twist

• Power supply: 100 – 240 V AC

• Digital display for wire diameter

• Can be set to a wide variety of functions

• Compact, lightweight, benchtop



Cosmic 60R, Cosmic 60R-W and Cosmic 60R-L Rotary Jacket Stripping Machines Patented rotary 4-blade system, for larger diameter multi-conductor cable The Cosmic 60R is designed for jacket stripping of

multi-conductor or single cable. Its patented rotary

4-blade system can strip various insulation material

cables without changing the blades. It comes equip-

ped with a digital display for setting the wire or cable

diameters.

Product Features

• It is possible to strip different wire sizes without the

need to change the stripping blades

• Easy to adjust the cutting diameter by micrometer

dial

• Digital display for stripping diameter selection

• Easy to select full or partial strip

• Powered by electricity only

• Optimal cutting performed by rotary blade system

Technical Data

Application

Cosmic 60R Discrete wires, jacket of multi-core wiresHard and tough insulation materialBraided or textile layers

Cosmic 60R-WDiscrete wires, jacket of multi-core wiresHard and tough insulation materialBraided or textile layers

Cosmic 60R-LDiscrete wires, jacket of multi-core wiresHard and tough insulation materialBraided or textile layers

Max. insulation diameter 2.5 – 10 mm (0.1 – 0.4 in) 11 – 18 mm (0.43 – 0.7 in) 2.5 – 10 mm (0.1 – 0.4 in)

Stripping length 3 – 90 mm (0.43 – 0.7 in) 3 – 90 mm (0.43 – 0.7 in) 3 – 200 (0.43 – 7.9 in)

Form and Number of blades

4-blade rotary system 4-blade rotary system 4-blade rotary system

Weight 20 kg (44 pounds) 20 kg (44 pounds) 20 kg (44 pounds)

Machine Dimensions (L x W x H)

241 x 230 x 640 mm(9.5 x 9.1 x 25.2 in)

241 x 230 x 640 mm(9.5 x 9.1 x 25.2 in)

241 x 230 x 640 mm(9.5 x 9.1 x 25.2 in)



Cosmic 42R Coaxial Stripping MachineThe Cosmic 42R is a developed cable stripper for

ultra-micro coaxial cables. This precision machine is

made through state-of-the-art engineering and will

be the perfect fit in your operation.

Function

The Cosmic 42R bench top machine is equipped with

a waste vacuum cleaning system to achieve proper

removal of slugs. With its three blade rotating head

it performs a precise centered cutting and stripping

function. The centralizer pressure is adjustable to avoid

unwanted twist and/or deformation.

All parameters required for coax stripping: stripping

length, incision diameter, wayback, pull-back speed,

etc. are display on a large LCD screen for speedier

setups. The unit allows for up to 1.000 different data

sets to be stored which can be recalled quickly and

easily.

Product Features

• Repeatable high precision

• Equipped with waste vacuum system

• Stores up to 1.000 sets of data

• Stripping up to 9 steps

• Graphical LCD display

• Compact, easy-to-handle bench top model length

Technical Data

ApplicationCoaxMicro CoaxMicro Triax

Cross. section area 0.005 – 1.5 mm2 (discrete conductor)


Min. diameter of inner conductors 0.01 mm (0.002 in)

Pull off length max. 40 mm (1.6 in)

Form and Number of bladesSpecial head design with 3 blades and 3 centralizers for high precision

Max. stripping levels 9

Weight 9.2 kg (20.3 pounds)






Cosmic 48R and Cosmic 48RX Coaxial Wire Stripping Machines The Cosmic 48R is designed for quick cycle times

whether stripping coaxial or standard wires. With

these extremely versatile features, this will be the

perfect machine for your production.

Function

The Cosmic 48R is an all-electric bench top machine

designed for quick cycle times whether stripping

coax ial or standard wires and can store up to 1.000

different sets of data. This unit uses a triple stepping

motor system to process cable up to nine stages, and

has a 10-phase programmable adjustment for gripping

pressure. The results are highly precise and repeata-

ble. All the parameters required for coax stripping:

stripping length, incision diameter, wayback, pull-back

speed, etc. are displayed on a large LCD screen for

speedier setups.

The Cosmic 48RX shares the features of the

Cosmic 48R but is optimized for semi-flexible cables

Product Features

• Versatile with all-around high precision

• Stripping up to 9 steps

• Graphical LCD display

• Programmable gripper pressure

• Lightweight and portable

• Excellent value for the moneyTechnical Data

ApplicationCosmic 48R Coax, Triax and othermultilayer cables

Cosmic 48RX Semi-flex cables Optimized blade geometry(angeled blades)Optimized cutting parameters(slower blade feed)

Cross. section area 0.013 – 13 mm2 (AWG 36 – 6)


Min. diameter of inner conductors 0.15 mm (0.006 in)

Pull off length max. 40 mm (1.6 in)

Form and Number of blades 2 rotating blades with centralizer

Max. stripping levels 9

Weight 10 kg (22 pounds)



Kappa 310 Cutting and Stripping Machine

The Kappa 310 is an ultra-compact high-speed

machine for reliable controlled processing of the

smallest cross-sections from 0.02 mm2 to 6 mm2.

Product Features

• Ultra-fast cutting and stripping for high production

output

• Powerful drive axles for extremely high cable

transport speeds

• Wire feed parts can be changed without tools

• Minimal setup thanks to unique sensors

• Memory for process parameters, including

programmable wire applied pressure valves

• Processing set for short wire lengths starting

from 18 mm

Kappa 315 Cutting and Stripping MachineThe Kappa 315 is fitted with a powerful and robust

blade head and has a processing range that comprises

cross-sections of 0.05 mm2 to 10 mm2.

Product Features

• Precise and robust blade axis

• different blade shapes for the highest stripping

quality

• Wire feed parts can be changed without tools

• Minimal setup time thanks to a unique conductor

detector

• Memory for process parameters, including

programmable wire applied pressure valves

• Processing set for short wire lengths starting

from 30 mm



Kappa 320 Cutting and Stripping Machine This machine features a number of options and a

powerful blade head. Wire sizes from 0.05 mm2 to

10 mm2 fall within its processing capacity. From this

machine type and higher, all fully automatic cutting

and stripping machines can be controlled and net-

worked via TopWin software to allow inkjet marking.

Product Features

• Broader processing range with a diversity of options

and solutions

• Innovative sensors to aid in setup and to monitor

processing

• Simple operator friendly touch-screen

• Simple integration of additional processing options

• TopWin software for connecting inkjet, part list

production and network solutions

Kappa 322 Cutting and Stripping Machine The real standout feature of the Kappa 322 cutting

and stripping machine is the patented swivel technique

utilized in the wire drive axes. Two different processing

positions can be approached with this feature.

The machine is designed for a wide variety of special

applications or the separation and processing of inside

wires in multi-pole cables.

Product Features

• Broader processing range with a diversity of options

and solutions

• Innovative sensors to aid in setup of cables


• Simple integration of additional processing options

• TopWin software for connecting inkjet, part list

production and network solutions


Kappa 330 Cutting and Stripping Machine This model is designed for processing cables with a

cross section of up to 35 mm2, multi-core conductors

with an outside diameter of up to 16 mm or flat cables

with a width of up to 40 mm. The customer has his

choice of a belt drive or various double-roller drives

depending on his requirements.


Kappa 331 U/Coax Precise and flexible cutting and stripping machine with rotary incision The Kappa 331 is a modular cut and strip machine with

a rotating blade module. Round, multilayered cables

– with and without shielding – are precisely stripped

in multiple steps. The machine can be changed over

quickly, making it ideal for flexible use.

Use as universal model The universal-machine with swivel guide offers a wide

range of uses. It allows you to easily program and

precisely process short and long stripping lengths and

individual wires, jacketed cables, coaxial cables and

other multilayered cables. An inkjet marks the cable

near the blade to minimize scrap. Numerous options

expand the processing range even more, e.g., the slit

unit or the feature for processing flat ribbon up to

16 mm.

Use as universal/coax model This model is optimized for the precise processing of

demanding coaxial and triaxial cables with stripping

lengths of up to 60 mm. The highly precise rotating

cutting unit, the independent length measurement

system and the symmetrical layout of drives and

blades combine with the split guides to create

optimum conditions for this task.

Bild fehlt!

Product Features

• Broad range of uses

• Great flexibility thanks to the modular design

• Precise multi-layer stripping

• Your choice of belt or roller drive for optimum force

transmission

• Allows even demanding cables to be stripped

without blade changes

Product Features

• High performance



processing

• Minimal wire loss on set up thanks to sensor

monitoring

• Simple integration of delivery and deposit equipment

• TopWin interface

• Networking possibility to customers own network


Use Universal Universal/Coax

Cross section area 0.22 mm2 – 35 mm2 (AWG23 –AWG2)*

Max. outside diamenter 16 mm (0.63 in)

Length range 1 mm – 800000 mm (0.039 in – 875 yd)

Length accuracyRepeat accuracy

±(0.2 % + 1 mm (0.04 in))

Max. stripping lengths

Full stripSide 1: 180 mm (7.09 in)Side 2: 50 mm (1.97 in)Semi/multiple strip-offSide 1: 999.9 mm (39.37 in)Side 2: 999.9 mm (39.37 in)

Full stripSide 1: 60 mm (2.36 in)Side 2: 60 mm (2.36 in)Semi/multiple strip-offSide 1: 999.9 mm (39.37 in)Side 2: 60 mm (2.36 in)

Max. wire transport speed 4.0 m/s (157.5 in/s)

Quantity range 1 – 99999

Drive system Double-roller or belt drive

Wire guideSide 1: Swivel guideSide 2: Fixed guide/optional split

Side 1: Split guideSide 2: Split guide

Electrical connection 115/230 V AC ± 10 % 50/60 Hz 680 VA

Compressed air connection 5 – 8 bar / 500 – 800 kPa (73 – 116 psi)

Air consumption < 10 liter per minute

Dimensions (W x H x D) 870 x 380 x 670 mm (34 x 15 x 26 in)

Weight Approx. 100 kg (220 lbs)

Kappa 331 Technical Data

*Applications specific up to 50 mm2

Kappa 350 Cutting and Stripping Machine

This powerhouse with its double-blade principle is

designed for processing round conductors with a cross

section of up to 120 mm2 and a maximum outside dia-

meter of up to 35 mm. The powerful belt drive ensures

gentle processing across the entire cross section range.

The sensors are combined with a length measuring

encoder to provide optimum process monitoring and

accuracy. Zero-cuts are automatically minimized.

Product Features

• High performance



processing

• Minimal wire loss thanks to sensor monitoring

• Simple integration of delivery and deposit

equipment

• TopWin interface

• Networking possibility to customers own network



* Machines of the Kappa 3xx generation can process many conductors outside the indicated cross section range. Certain extremely hard, tough wires may not be able to be processed even if they are within the indicated cross section range. In case of doubt, we are happy to produce samples of your wires.

Applications Kappa 310 Kappa 315 Kappa 320 Kappa 322

Cable cross section, stranded wires*

0.02 mm2 – 6.0 mm2

AWG 34 – AWG 100.05 mm2 – 10.0 mm2

AWG 30 – AWG 70.05 mm2 – 10.0 mm2

AWG 30 – AWG 70.05 mm2 – 16.0 mm2

AWG 34 – AWG 5

Maximum outside diameter

10.0 mm (0.4 in) 10.0 mm (0.4 in) 10.0 mm (0.4 in) 12.0 mm (0.47 in)

Length accuracy±[0.2 % +1 mm (0.04 in.)] Repeat accuracy

±[0.2 % +1 mm (0.04 in.)] Repeat accuracy



Flat cable processingv

Optional 8.0 mm (0.32 in)




Maximum wire transport speed

4.0 m/s (157.5 in/s) 2.0 m/s (157.5 in/s) 4.0 m/s (157.5 in/s) 4.0 m/s (157.5 in/s)

Maximum stripping length

Full stripSide 1: 100 mm (3.94 in)Side 2: 40.0 mm (1.57 in)Semi stripSide 1: 999.9 mm (39.37 in)Side 2: 999.9 mm (39.37 in)Multiple stripSide 1: 999.9 mm (39.37 in)Side 2: 999.9 mm (39.37 in)



Full stripSide 1: 100 mm (3.94 in)Side 2: 90 mm (3.54 in)Semi stripSide 1: 999.9 mm (39.37 in)Side 2: 999.9 mm (39.37 in)Multiple stripSide 1: 999.9 mm (39.37 in)Side 2: 999.9 mm (39.37 in)

Noise level < 70 dBA < 70 dBA < 70 dBA < 70 dBA

Drive system Roller Roller Roller Belt/Roller

Electrical connection

110/230 V AC ±10 %50/60 Hz 300 VAC

110/230 V AC ±10 %50/60 Hz 300 VAC

110/230 V AC ±10 %50/60 Hz 520 VAC

110/230 V AC ±10 %50/60 Hz 300 VAC

Pneumatic connection

optional optional optional5 – 8 bar / 500 – 800 kPa(73 – 116 psi)

Dimensions(W x H x D)

465 x 385 x 460 mm(18.3 x 15.2 x 18.1 in)

466 x 385 x 460 mm(18.3 x 15.2 x 18.1 in)

510 x 380 x 470 mm(20 x 15 x 18.5 in)

650 x 380 x 470 mm(25.6 x 15 x 18.5 in)

Weightapprox. 25 kg (55.0 lbs

approx. 25.9 kg (57.0 lbs)

approx. 34 kg (75.0 lbs)



Applications Kappa 330 Kappa 331U Kappa 331U/Coax Kappa 350

Cable cross section, stranded wires*

0.22 mm2 – 35.0 mm2

AWG 24 – AWG 20.22 mm2 – 35.0 mm2

AWG 24 – AWG 20.22 mm2 – 35.0 mm2

AWG 24 – AWG 22.5 mm2 – 120.0 mm2

AWG 14 – AWG 5/0

Maximum outside diameter

16.0 mm (0.63 in) 16.0 mm (0.63 in) 16.0 mm (0.63 in) 35.0 mm (1.38 in)

Length accuracy±[0.2 % +1 mm (0.04 in.)] Repeat accuracy




Flat cable processing

Optional 40 mm (1.6 in)



—

Maximum wire transport speed

4.0 m/s (157.5 in/s) 4.0 m/s (157.5 in/s) 4.0 m/s (157.5 in/s) 4.8 m/s (189 in/s)

Maximum stripping length



Full stripSide 1: 60 mm (2.36 in)Side 2: 60 mm (2.36 in)Semi stripSide 1: 999.9 mm (39.37 in)Side 2: 60 mm (2.36 in)Multiple stripSide 1: 999.9 mm (39.37 in)Side 2: 60 mm (2.36 in)


Noise level < 70 dBA < 70 dBA < 70 dBA < 70 dBA

Drive system Belt/Roller Belt/Roller Belt/Roller Belt/Roller

Electrical connection

110/230 V AC ±10 %50/60 Hz 680 VAC

110/230 V AC ±10 %50/60 Hz 680 VAC

110/230 V AC ±10 %50/60 Hz 680 VAC

110/230 V AC ±10 %50/60 Hz 1.2 kVA

Pneumatic connection

— — — —

Dimensions(W x H x D)

630 x 365 x 480 mm(24.8 x 14.8 x 18.9 in)

870 x 380 x 670 mm(34 x 15 x 26 in)

871 x 380 x 670 mm(34 x 15 x 26 in)

1090 x 1425 x 890 mm(42.9 x 56.1 x 35.0 in)

Weightapprox. 55 kg (121.3 lbs)

approx. 100 kg (220 lbs)

approx. 100 kg (220 lbs



ApplicationsKappa 310 0.02 mm2 – 6.0 mm2

AWG 34 – AWG 10

Kappa 315 0.05 mm2 – 10.0 mm2

AWG 30 – AWG 7

Kappa 320 0.05 mm2 – 10.0 mm2

AWG 30 – AWG 7

Kappa 322 0.05 mm2 – 16.0 mm2

AWG 34 – AWG 5

Cutting

Cutting pulled strands

Precision cut

Full stripping

Half stripping

Multiple strip stripping


Multi conductor cable

Inner conductor processing

Double sheath / Coaxial and triaxial cables

Coaxial and triaxialcable processing

Intermediate strip

Intermediate slitting

Hot stamp marking

Inkjet marking

Sequence processing



ApplicationsKappa 330 0.02 mm2 – 6.0 mm2

AWG 34 – AWG 10

Kappa 331U 0.05 mm2 – 10.0 mm2

AWG 30 – AWG 7

Kappa 331U/Coax 0.05 mm2 – 10.0 mm2

AWG 30 – AWG 7

Kappa 350 0.05 mm2 – 10.0 mm2

AWG 30 – AWG 7

Cutting

Cutting pulled strands

Precision cut

Full stripping

Half stripping

Multiple strip stripping


Multi conductor cable

Inner conductor processing

Double sheath / Coaxial and triaxial cables

Coaxial and triaxialcable processing

Intermediate strip

Intermediate slitting

Hot stamp marking

Inkjet marking

Sequence processing


tooling.te.com1-1773919-7 / Revised 06-17 © 2017 TE Connectivity Ltd. family of companies. All Rights Reserved. AMP, EYE Check, LITEALUM, OCEAN, RAYCHEM, SOLARLOK, TE Connectivity and TE connectivity (logo) are trademarks. Crimpmatic is a trademark. iButton and MOST are trademarks.Other product and/or crimping names herein might be trademarks of their respective owners.

Let’s ConnectTo learn more about the right TE tooling for your needs, call us a 717-810-2082 or email [email protected]

TE Technical Support CenterUSA: 1.800.522.6752Canada: 1.800.522.6752Mexico: +52.55.11.06.0800 Latin/S. America +54.11.4733.2200Germany: +49.6151.607.1999

UK: +44.0800.267666 France: +33.1.34.20.8686Netherlands: +31.73.624.6999China: +86.400.820.6015

Stronger, Smarter, More Reliable Applicator.

If you are looking to increase production and improve crimp consistency, consider adding an OCEAN applicator to your wire crimping process.

The OCEAN applicator’s flexible design is quickly adaptable to a wide variety of terminal configurations and features:

• Tool-less fine adjustment capabilities for wire & insulation crimps

• 3 feed options (mechanical, pneumatic, and servo)

• For additional information download catalog #4-1773460-5 from tooling.te.com.

Waste Not. Want Not.

Whether its time or scrap, in manufacturing everyone knows that waste costs money. With our on-site certification and consultation services, we can help you:

• Reduce downtime• Reduce scrap• Maintain crimp quality• Improve manufacturing efficiency

Connect with us today to learn more.

• E-mail: [email protected]• Phone: 800-722-1111 or 717-986-3434• For additional information download catalog

#1-1307619-0 from tooling.te.com.

wire preparation equipment - te connectivity: … · technical data application discrete wires ......

Documents