wire jewelry earrings with handmade pendant
TRANSCRIPT
Wire Jewelry Earrings with Handmade Pendant
If you’ve come up with a sparkling beading pattern
and want to show others how to create it, you might
need to make a bead diagram. And when compared
with most common jewelry making tutorials,
diagrams have huge advantage over others for its
conciseness and clearness. In this tutorial you will
discover how to create a handmade pendant that
consists of wire and glamorous glass beads.
Supplies needed in the wire jewelry earrings:
4mm Abacus Glass Bead
Drop Glass Bead
Oval Linking Ring
Clip-on Earring Component
0.5mm Brass Wire
Beading diagram:
Instructions:
Step 1: Prepare the handmade pendant
Cut a segment of 20cm long brass wire. Make a triangle bail for your drop bead.
Step 2: Wrap the beads onto the oval link
Here, you will need 50cm long of 0.5mm brass wire, 1 drop bead pendant and 16 abacus beads for
each earring.
This bead diagram tutorial shows you how to make a pair of wire jewelry earrings decorated with a
handmade pendant. All steps are presented clearly in detail!
Take the wire and start to wrap, keeping 7cm long of wire at beginning. Each time you wrap two
and a half turns feed one abacus bead onto the wire.
In the center, slide on the handmade pendant.
Keep adding the rest of the 8 abacus beads. Fix the wire end in place.
Step 3: Attach on Clip-on Earring Component
Grab the leftover 7cm wire, slide on the clip-on earring component and then make a messy
wrapped loop.
Step 4: Make another piece
Repeat steps 1~3 for the other part of your wire jewelry earrings!
Using diagrams is a brand new in our learning center. In my case, I prefer beading diagram
tutorials. However, if you get some questions or are confused about this pattern of wire jewelry
earrings with handmade pendant; feel free to ask questions, they are welcomed!
Shop for many styles of links and other jewelry findings, welcome to visit our webpage at:
http://www.pandahall.com/wholesale-Jewelry-Findings/3.html