circular brick stitch earrings jewelry making...
TRANSCRIPT
Page 1 www.handmade-jewelry-club.com
www.diylessons.org
Circular Brick Stitch Earrings Jewelry Making Tutorial Designed by Sky Aldovino
Reviewed by XQ Designs
www.Handmade-Jewelry-Club.com,
www.DIYLessons.org
Please do not distribute, lend or copy. Do not mass produce.
Copyrights 2012 XQ Designs
Descriptions:
Circular brick stitch is a fun and exciting beadweaving technique. You can come up with different designs and incorporate it with other beadweaving techniques. In this tutorial, we will teach you the basics of the circular brick stitch using a ring or earring frame, weaving back and forth while you make a pair of earrings. The tutorial will also give you tips on how to come down a step/bead, or 2 steps down, or more to create a variation of the circular brick stitch. The tutorial is suited for intermediate to advance level, but confident beadweavers will also be able to follow through the pictoral step by step instructions. In case you don’t have a similar earring hoops used to create the Brick Stitch Earring, you will find a simple tutorial at Appendix 1.
Page 2 www.handmade-jewelry-club.com
www.diylessons.org
Materials required Tools Needed
4 different colors of seed beads 2 ear wires
Beading thread 2 circular earring hoop/frame with a bail
• Scissors • Flat nose pliers (optional) • Beading needle
Step 1: Cut at least an arm span to 75 inches of thread. Tie a
knot twice onto the earring hoop, leaving about 6 inches
tail.
Page 3 www.handmade-jewelry-club.com
www.diylessons.org
Step 2: 1st layer of brick stitches Slide in 2 seed beads.
Step 3: Bring your thread under and around the earring hoop
like shown in arrow, wrapping the earring hoop.
Page 4 www.handmade-jewelry-club.com
www.diylessons.org
Step 4: Pull the thread and as you pull insert the thread back
thru the 2nd seed bead shown in arrow.
Step 5: Pull your thread. You’ll have the seed beads lying on top of the earring hoop.
Page 5 www.handmade-jewelry-club.com
www.diylessons.org
Step 6: Slide in 1 seed bead then bring your thread under and
around the earring hoop, like you did in Step 3,
wrapping the earring hoop and going back thru the
same seed bead you just added.
Step 7: Pull your thread.
Page 6 www.handmade-jewelry-club.com
www.diylessons.org
Step 8: Repeat Step 6 until you reach the other side of the
earring hoop.
Step 9: 2nd Layer of brick stitches Flip your earring so that you have the needle on your
right side again then slide in 2 seed beads
Page 7 www.handmade-jewelry-club.com
www.diylessons.org
Step 10: Bring your thread under the bridge or thread, shown in
arrow, connecting the 2nd & 3rd seed beads.
Step 11: Continue to insert the thread into the 2nd seed bead you
just added shown arrow.
Page 8 www.handmade-jewelry-club.com
www.diylessons.org
Step 12: Pull the thread and you’ll have 2 seed beads lying on top
of the 1st layer of seed beads Slide in 1 seed bead.
Step 13: Then insert the thread under the bridge or thread
connecting the 3rd & 4th seed beads. Then continuously
insert the thread into the same seed bead you just
added and pull the thread.
Page 9 www.handmade-jewelry-club.com
www.diylessons.org
Step 14: Repeat Steps 12 & 13 until you reach the other side of
the earring hoop and done with your 2nd layer of brick
stitches.
Page 10 www.handmade-jewelry-club.com
www.diylessons.org
Step 15: 3rd Layer of brick stitches Repeat Steps 9 to 14 and create your 3rd layer of brick
stitches.
Step 16: Stepping 2 seed beads down We are now stepping 2 seed beads down to create the
4th layer.
Coming out of the very last yellow seed bead shown in
white arrow, going inward the earring hoop insert the
thread back thru the next yellow seed bead shown in
black arrow.
Page 11 www.handmade-jewelry-club.com
www.diylessons.org
Step 17: Still going inward the earring hoop, continue to insert
the thread into the 3rd white seed bead from the 2nd
layer.
Step 18: This time going outward the earring hoop, insert the
thread into the 2nd white seed bead from the 2nd layer.
Page 12 www.handmade-jewelry-club.com
www.diylessons.org
Step 19: Lastly, insert the thread into the 2nd yellow seed bead
then pull the thread.
Note:
If you want to come down a step, or 2 steps down, or
more, your thread should come out the corresponding
number of steps and beads.
Your thread should be coming out of the 2nd yellow seed
bead, in preparation for the 4th layer.
Page 13 www.handmade-jewelry-club.com
www.diylessons.org
Step 20: 4th Layer of brick stitches
Repeat Steps 9 to 14.
Step 21: 5th Layer of brick stitches
Repeat Steps 16 to 19 of stepping 2 seed beads down
then repeat Steps 9 to 14 to weave the 5th layer of brick
stitches.
Page 14 www.handmade-jewelry-club.com
www.diylessons.org
Step 22: 6th Layer of brick stitches
Repeat Steps 16 to 19 of stepping 2 seed beads down
then repeat Steps 9 to 14 to weave the 6th layer of brick
stitches.
Step 23: 7th Layer of brick stitches
For the final layer, repeat Steps 16 to 19 of stepping 2
seed beads down then repeat Steps 9 to 14 to weave
the 7th layer of brick stitches.
Page 15 www.handmade-jewelry-club.com
www.diylessons.org
Step 24: Weaving the picot edges Coming out of the very last yellow seed bead, slide in 3
white seed beads and insert the thread back thru the
next yellow seed bead.
Step 25: Pull the thread and you should have a picot edge.
Page 16 www.handmade-jewelry-club.com
www.diylessons.org
Step 26: Continue to insert the thread into the next yellow seed
bead.
Step 27: Slide in 3 white seed beads and insert the thread into
the next yellow seed bead.
Page 17 www.handmade-jewelry-club.com
www.diylessons.org
Step 28: Pull the thread. Repeat Step 26 & 27 until you reach the
very last yellow seed bead.
Step 29: To finish off the thread, go back thru the seed beads, tie
a knot and go back thru again several seed beads. Make
your final knot and then cut off excess thread. Do the
same for the tail end you left at the start then attach
your ear wire.
Page 18 www.handmade-jewelry-club.com
www.diylessons.org
You have completed the Circular Brick Stitch Earrings.
Hope you like it!
If you have any query or feedback for the tutorial,
please contact me at [email protected].
Please do not distribute, lend or copy.
Do not mass produce.
Copyrights 2012 XQDesigns
Page 19 www.handmade-jewelry-club.com
www.diylessons.org
APPENDIX 1
Earring Hoops with a Bail Wire Jewelry Making Tutorial
Descriptions:
This is a simple tutorial that will show you the steps how to create the earring hoops, similar to the earring hoops that was used in creating the Brick Stitch Earrings.
Page 20 www.handmade-jewelry-club.com
www.diylessons.org
Materials required Tools Needed
20 ga copper wire
• Round nose pliers • Wire Cutter
Step 1: Depending how big you want your earring hoops will be,
cut a 20ga wire and using your nose pliers make a loop
at one end.
Page 21 www.handmade-jewelry-club.com
www.diylessons.org
Step 2: Using a round object, a mandrel or a spool shape the
wire into a circle.
Step 3: Then wrap the wire just below the loop.
Page 22 www.handmade-jewelry-club.com
www.diylessons.org
Step 4: Cut off excess wire and you're done! You now have your
earring hoops with a bail.
Page 23 www.handmade-jewelry-club.com
www.diylessons.org
Join our monthly subscription plan! Exclusive offer for our existing members
from www.diylessons.org and www.handmade-jewelry-club.com or buyers from
Etsy, Artfire and eBay! Just pay a small fee to access at least 5 tutorials a month,
click here to find out more: http://www.handmade-jewelry-
club.com/2011/12/join-diy-beading-club-and-get-access-to.html!