wire edm sinker edm small hole edm precision machining · small hole edm precision machining iso...

Wire EDM Sinker EDM Small Hole EDM Precision Machining

ISO 9001:2008 Registered

Toll Free: (866) 924-6602 Local: (770) 924-8328 Fax: (770) 924-7987

[email protected] Visit us online at: www.edmtechnologies.net

EDM Technologies, Inc. 325 Bell Park Drive

Woodstock, GA 30188

EDM Technologies

EDM Technologies is a premier national Electrical Discharge Machining (EDM) job shop located in Woodstock, GA. EDM Technologies is an ISO 9001:2008 certified company that has been specializing in EDM Machining for more than 27 years. EDM Technologies offers the following services: Wire EDM Sinker EDM Small Hole EDM Precision Machining ISO 9001:2008 Certified In-house Heat-Treatment Complete Precision Tooling Source

EDM Technologies has grown to become the largest EDM Job Shop in the Southeast by combining state-of-the-art technology with an expert staff of specialists in Electrical Discharge Machining.




Woodstock, GA 30188

Wire EDM

EDM Technologies has the largest capacity for Wire EDM Machining in the Southeast: Wire EDM Diameters from .001” - .013” Maximum Taper Angle: 40º Maximum Cutting Height: 20.50” Best WEDM Surface finish: Steel: 2 Micro-Inch Best WEDM Surface finish: Aluminum: 6 Micro-Inch Tolerances can be held to .00004” Programming using Esprit 2015 by DP Technology Prototypes to High Volume Production ISO 9001:2008 Certified

EDM Technologies uses machines with the latest in EDM Technology from GF AgieCharmilles. Programming is done utilizing Esprit 2015 CAM Software by DP Technology, and we can accept the following file formats for easy integration into programs: dxf, dwg, iges, Solidworks, Solid Edge, Parasolid, acis, step, and catia.




Woodstock, GA 30188

Sinker EDM

EDM Technologies offers Sinker EDM Machining-also known as Conventional EDM, Ram EDM, Die-Sinker, and Plunge EDM. The Sinker EDM process is ideal for: Blind Cavities Intricate Details, Sharp Corners Thin Walls and Cross Sections Machining Threads into Hardened Parts Blind Keyways, Internal Splines, Squares, and Hexes Surface Finishes down to 4 Micro-Inch Tolerances can be held to .0001” Materials include: Aluminum, Brass, Carbide, Copper,

Hastalloy, Inconel, Steel, Stellite, and Titanium.

EDM Technologies has complete in-house electrode manufacturing capabilities. Our Sinker EDM machines are outfitted with a C-Axis for orbital and helical machining, as well as tool changers to increase unattended machine time and minimize cost to our customers.




Woodstock, GA 30188

Small Hole EDM

EDM Technologies specializes in Small Hole EDM Drilling or “Hole Popping”. Small Hole EDM Machining is ideal for: Small Holes In Turbine Blades and Fuel Injectors Ejector Holes In Hardened Punches Coolant Holes In Cutting Tools Vent Holes in Molds Start Holes for Wire EDM Part heights up to 12” can be EDM Drilled Small Hole Diameters range from .155mm to 3.0mm Materials include: Aluminum, Brass, Carbide, Copper,

Hastalloy, Inconel, Steel, Stellite, and Titanium.




Woodstock, GA 30188

Precision Machining

EDM Technologies offers a complete in-house precision machining department to complement our EDM Services: CNC Milling CNC Turning Grinding Engraving In-house Heat-Treatment Complete Build-to-print manufacturing We maintain an inventory of steels (hard/soft), aluminum, brass, and carbide to provide emergency tooling when need-ed.

RE G I STRATION C E RTI F ICATE

This document certifies thot the odministrotion systems of

EDM Technologies, lnc,325 Bell Park Drive, Woodstock, Georgia 30188, USA

have heen ossessed and opproyed by QAS lnternationolto the following monogement systems, stondords ond guidelines:

ISO 900 I:2008With the permitted exclusion of clause 7.3 Design and Development

The opproved odministration systems opply to the following:

An electrical discharge machine shop using state of the anmachines to manufacture precision tools.

O r i g i n a I A p p rova I ... _ _. _ _.. t.dh.. gstg b.e r.ZQ 9.2_

Current Certificate 27"t October 201i

C e r t i f i c a te E x p i ry .......... Z_1.:. g.c. lp _b.e. r..ZQ L g_

Certificate Number A1727US

,{tBN4 u

This certificate remains valid while the holder maintains their quality administration systems in

accordance with the standards and guidelines stated above, which will be audited annually by

OAS lnternatjonal. The holder is entitled to display the above registration mark for the duration

ofthis certmcate, which should be relurned to QAS lnternational upon reasonable request.

lssuing Office: QAS lntemational, 20A Oxford Street, Malmesbury, Wiltshire SN16 gAX, UK

;s,',.

YT'-^

a)

On behalf of OAS I

QAS International

wire edm sinker edm small hole edm precision machining · small hole edm precision machining iso...

Documents