wince development kit with arm11

5
WinCE Development kit with ARM 11 core Product Number: Ec95850 Emblitz WinCE ARM11 Highlights: · Source Code for winCE 6.0 · Processor: Samsung S3C6410, ARM1176JZF-S, up to 667MHz. · 128MB Mobile DDR SDRAM, 266MHz, Samsung K4X51163PC · 256MB SLC NAND Flash, Samsung K2F2G08, 1G Nand Flash optional · 2M Bytes NOR Flash, AMD AM29LV160DB · 1 EEPROM, support I2C, it can be soldered with AT88SC016 for encryption · SDIO WIFI Module, supporting IEEE802.11b/g · LCD/Touch Screen interface. Supporting 3.5" TFT LCD, 4.3" TFT LCD,7" TFT LCD and 10.4" LCD (current stock is available with only 7” TFT touch screen display) · Many modules are available for your choice- GPS, WIFI, Camera, USB HUB+4x4 Matrix Keyboard, USB 3G Modem.

Upload: paras-jain

Post on 11-Mar-2015

537 views

Category:

Documents


2 download

DESCRIPTION

WinCE Development kitwith ARM 11 coreProduct Number: Ec95850Emblitz WinCE ARM11 Highlights:· Source Code for winCE 6.0· Processor: Samsung S3C6410, ARM1176JZF-S, up to 667MHz.· 128MB Mobile DDR SDRAM, 266MHz, Samsung K4X51163PC· 256MB SLC NAND Flash, Samsung K2F2G08, 1G Nand Flash optional· 2M Bytes NOR Flash, AMD AM29LV160DB· 1 EEPROM, support I2C, it can be soldered with AT88SC016 for encryption· SDIO WIFI Module, supporting IEEE802.11b/g· LCD/Touch Screen interface. Supporting 3.5" TFT LCD, 4.3" TFT LCD,7" TFT LCD and 10.4" LCD(current stock is available with only 7” TFT touch screen display)· Many modules are available for your choice- GPS, WIFI, Camera, USB HUB+4x4 MatrixKeyboard, USB 3G Modem.· GPIO ,ADC, SPI,IIC, I/O, Interrupts and MMC are in 2 2x20 pin header· One audio input interface (3.5mm audio jack)· One 2-channel audio output interface (3.5mm audio jack)· One 100M Ethernet interface (RJ45)· One USB2.0 Host port (USB A/F type interface)· One USB2.0 Device port (Mini USB type interface)· Four serial ports (Two are five-wire interface, another two are three-wire TTL serial interface)· 2 SD/MMC interface (supports 3.3V and 1.8V logic voltage)· Camera interface (10x2 pins header, supporting the mode of ITU-R 601/656 8bit)· One 5x2 pins JTAG interface· Seven buttons (Reset, Boot, User defined, On/Off)· One TVOUT· Board Dimension: 116.6 x 76.8 x 17mm· Power supply: +12VSBC6410 Description:SBC6410 is based on Samsung S3C6410 - an advanced ARM11 CPU for running operating system and application code, and for dedicated video processing. Low voltage Mobile DDR enables very low power consumption in regular operation and in standby. For embedded applications,the SBC6410 provides a general purpose local bus, 100Mbit Ethernet, serial ports, I/O lines and other essential functions, while integrated WiFi interface implement industry standard wireless connectivity.The small size and low power consumption of the SBC6410 allows its integration into hand-held and mobile devices, while its low price makes it an ideal selection for cost-sensitive applications.The SBC6410 delivers a price / performance ratio significantly better than that of any other platform.WinCE6.0BootStepldrProviding Source code and STEPLDR.binEbootProviding Source code and EBOOT.bin Eboot main functions: 1. Ethernet download: Set static IP, HDCP gets Dynamic IP, Mac address setting, download kernel automatically by Ethernet when the system starts. 2. USB download: update the image via USB OTG 2.0 3. Format Nand Flash 4. Format BinFS 5. Low-level Format 6. Set boot-up delayed time 7. Booting process barSdboot1. SD Card boot-up and download Image via USB (can replace JTAG) 2. Replace booting LOGOSystemDriver1.3.5” ,4.3”,7” LCD,10.2” and 10.4”(LVDS) including Touch Screen, TVOUT, LEDs 2. Supporting 16/18/24Bpp 3. Supporting LCD display rotateSD card, High speed SD card, SPI, AC97, Camera, Ethernet, USB Host, USB Device, Serial ports, RTC,GPS, WIFI,IIC,JPEG, SPI,Keyboard, NandFlash, wavedev, CF_ATA, CMM, DMA, DrvLib, MFC, Powerbutton, Powercontrol, UA0Function220MB NAND Flash for userPower Management (backlight drive, battery-driven, sleep/wake-up function), Hive registry support, ROM file system supportApplicationMFC Video Encode/decodeProviding Source Code and user manual, supporting MPEG-4/H264/H263/VC-1 and API operation manualDirectShow FilterProviding Source Code including: AACDecoderFilter, FrameExtractFilter, MFCDecoderFilter, MP4testcode, mpeg4ip_mp4v2, SsapMP4ParserJPEGJPEG/JPG encoding and decoding, providing driver and test program.OpenGLOpenGL ES1.1&2.0, providing source code anduser manualCameraSupporting CMOS Image sensor-ov9650/9653/9655TCPMPHardware decode MPEG-4/H263/H264/VC-1, supporting avi,mp4, m4v, mov, 3gp, flv, MPG. Supporting DIVX, XVID Supporting MP1, MP2, MP3, AC3, AAC more audio kinds.OFFICEWord, Excel, PowerPoint, PDF,txt, Skype,WinCE Development kit with ARM 9 SBC6410 Contents:

TRANSCRIPT

Page 1: WinCE Development Kit With Arm11

WinCE Development kit with ARM 11 core

Product Number: Ec95850

Emblitz WinCE ARM11 Highlights:

· Source Code for winCE 6.0

· Processor: Samsung S3C6410, ARM1176JZF-S, up to 667MHz.

· 128MB Mobile DDR SDRAM, 266MHz, Samsung K4X51163PC

· 256MB SLC NAND Flash, Samsung K2F2G08, 1G Nand Flash optional

· 2M Bytes NOR Flash, AMD AM29LV160DB

· 1 EEPROM, support I2C, it can be soldered with AT88SC016 for encryption

· SDIO WIFI Module, supporting IEEE802.11b/g

· LCD/Touch Screen interface. Supporting 3.5" TFT LCD, 4.3" TFT LCD,7" TFT LCD and 10.4" LCD

(current stock is available with only 7” TFT touch screen display)

· Many modules are available for your choice- GPS, WIFI, Camera, USB HUB+4x4 Matrix

Keyboard, USB 3G Modem.

Page 2: WinCE Development Kit With Arm11

· GPIO ,ADC, SPI,IIC, I/O, Interrupts and MMC are in 2 2x20 pin header

· One audio input interface (3.5mm audio jack)

· One 2-channel audio output interface (3.5mm audio jack)

· One 100M Ethernet interface (RJ45)

· One USB2.0 Host port (USB A/F type interface)

· One USB2.0 Device port (Mini USB type interface)

· Four serial ports (Two are five-wire interface, another two are three-wire TTL serial

interface)

· 2 SD/MMC interface (supports 3.3V and 1.8V logic voltage)

· Camera interface (10x2 pins header, supporting the mode of ITU-R 601/656 8bit)

· One 5x2 pins JTAG interface

· Seven buttons (Reset, Boot, User defined, On/Off)

· One TVOUT

· Board Dimension: 116.6 x 76.8 x 17mm

· Power supply: +12V

SBC6410 Description:

SBC6410 is based on Samsung S3C6410 - an advanced ARM11 CPU for running operating

system and application code, and for dedicated video processing. Low voltage Mobile DDR

enables very low power consumption in regular operation and in standby. For embedded

applications,the SBC6410 provides a general purpose local bus, 100Mbit Ethernet, serial ports,

I/O lines and other essential functions, while integrated WiFi interface implement industry

standard wireless connectivity.The small size and low power consumption of the SBC6410

allows its integration into hand-held and mobile devices, while its low price makes it an ideal

selection for cost-sensitive applications.The SBC6410 delivers a price / performance ratio

significantly better than that of any other platform.

Page 3: WinCE Development Kit With Arm11

WinCE6.0

Boot

Stepldr Providing Source code and STEPLDR.bin

Eboot

Providing Source code and EBOOT.bin Eboot main functions: 1. Ethernet download: Set static IP, HDCP gets Dynamic IP, Mac address setting, download kernel automatically by Ethernet when the system starts. 2. USB download: update the image via USB OTG 2.0 3. Format Nand Flash 4. Format BinFS 5. Low-level Format 6. Set boot-up delayed time 7. Booting process bar

Sdboot 1. SD Card boot-up and download Image via USB (can replace JTAG) 2. Replace booting LOGO

System

Driver

1.3.5” ,4.3”,7” LCD,10.2” and 10.4”(LVDS) including Touch Screen, TVOUT, LEDs 2. Supporting 16/18/24Bpp 3. Supporting LCD display rotate

SD card, High speed SD card, SPI, AC97, Camera, Ethernet, USB Host, USB Device, Serial ports, RTC,GPS, WIFI,IIC,JPEG, SPI,Keyboard, NandFlash, wavedev, CF_ATA, CMM, DMA, DrvLib, MFC, Powerbutton, Powercontrol, UA0

Function

220MB NAND Flash for user

Power Management (backlight drive, battery-driven, sleep/wake-up function), Hive registry support, ROM file system support

Application

MFC Video Encode/decode

Providing Source Code and user manual, supporting MPEG-4/H264/H263/VC-1 and API operation manual

DirectShow Filter

Providing Source Code including: AACDecoderFilter, FrameExtractFilter, MFCDecoderFilter, MP4testcode, mpeg4ip_mp4v2, SsapMP4Parser

JPEG JPEG/JPG encoding and decoding, providing driver and test program.

OpenGL OpenGL ES1.1&2.0, providing source code and

Page 4: WinCE Development Kit With Arm11

user manual

Camera Supporting CMOS Image sensor-ov9650/9653/9655

TCPMP

Hardware decode MPEG-4/H263/H264/VC-1, supporting avi,mp4, m4v, mov, 3gp, flv, MPG. Supporting DIVX, XVID Supporting MP1, MP2, MP3, AC3, AAC more audio kinds.

OFFICE Word, Excel, PowerPoint, PDF,txt, Skype,

Page 5: WinCE Development Kit With Arm11

WinCE Development kit with ARM 9 SBC6410 Contents: . One ARM11 SBC6410 Board with 7” touch screen . One CD-ROM (WinCE 6.0, Documents, tools, Schematic Drawing, datasheets) . One Serial cable (IDC10-to-DB9) . One 12V@2A Power adapter . One USB cable . One Cross Ethernet cable Warrenty: One Year Technical Support: Dedicated team will support for one complete year ASK FOR QUOTE OR FOR MORE DETAILS: Emblitz Technologies Pvt Ltd, #738/33, 12th Main, 3rd Blk, Rajajinagar, Bangalore 560010 India, www.emblitz.com, [email protected] Phones: 90 80 23140344, 90 80 23146229, Mobile: 09449104615 09980562847