wilcox’s rapid targeting & ranging module - s utilizes the same … and settings/39/site...
TRANSCRIPT
MODULAR BY DESIGN™WILCOX INDUSTRIES CORP. PHONE 603-431-1331 WWW.WILCOXIND.COM
Page 1
MODULAR BY DESIGN™
TDS232, A-2
WILCOX RAPID TARGETING & RANGING - S (RAPTAR-S™)
FEATURES
n Laser Range Finder (LRF)
n Infrared Aiming Laser/ Visible Aiming Laser
n Variable Infrared Illuminator (Flood to Spot)
n Intuitive User Interface
n Integrated Ballistic Engine
n Temperature/Humidity Reading
n Inclination, Cant, and Heading Reading
n Optional Bluetooth capability
Wilcox’s Rapid Targeting & Ranging Module - S utilizes the same proven technology as the original RAPTAR™ with an Infra-Red (IR) Laser, Visible Laser, IR Flood, and Laser Range Finder (LRF). In addition, the RAPTAR-S™ features an Applied Ballistics Solver for precise accuracy at extremely long ranges.
PRODUCT DESCRIPTION
PART NUMBERS
57300G01-LB RAPTAR-S, (Lusterless Brown)
57300G02-LB RAPTAR-S, ES (Lusterless Brown)
LEARN MORE
© Wilcox Industries Corp. 2014-2015. All rights reserved. WILCOX® is a Registered Trademark of Wilcox Industries Corp. Modular by DesignTM is a trademark of Wilcox Industries Corp. Specifications subject to change without notice. The Wilcox RAPTAR-S™ patent pending. Export of this publication is regulated by the U.S. Department of State in accordance with guidelines of “International Traffic in Arms Regulation (ITAR) per Title 22,Code of Federal Regulations, Parts 121-128.
Extremely accurate Fire Control Solutions for long range target engagements using the Applied Ballistics Solver.
n
Select either G1 or G7 Ballistic Coefficient or use one of the custom drag curves as measured by Bryan Litz for the most accurate solutions at extreme long range.
n
Accounts for all contributing environmental variables including Coriolis, spin drift, and aerodynamic jump.
n
“Train” (or calibrate) the software to match your specific rifle based on observed impacts at long range.
n
Expandable with emerging technology, producing an overall cost savings throughout the lifecycle.
n
MODULAR BY DESIGN™WILCOX INDUSTRIES CORP. PHONE 603-431-1331 WWW.WILCOXIND.COM
Page 2
MODULAR BY DESIGN™
TDS232, A-2
1. IR laser, VIS Laser, IR Flood, & Laser Rangefinder.
2. Menu Input & Selection Control Pad
3. Internal Battery Compartment Houses One (1) CR123
4. Hooded OLED Display
5. Mode Selector Knob
6. 12” & 20” Remote Cable Included
SPECIFICATIONSPRODUCT SPECIFICATIONS
WILCOX RAPID TARGETING & RANGING - S (RAPTAR-S™)
14
5
2
6
© Wilcox Industries Corp. 2014-2015. All rights reserved. WILCOX® is a Registered Trademark of Wilcox Industries Corp. Modular by DesignTM is a trademark of Wilcox Industries Corp. The Wilcox RAPTAR-S™ patent pending. Specifications subject to change without notice. Contact Wilcox for Warranty Statement. Export of this publication is regulated by the U.S. Department of State in accordance with guidelines of “International Traffic in Arms Regulation (ITAR) per Title 22,Code of Federal Regulations, Parts 121-128.
OVERALL SPECIFICATIONS
Total Operational Weight (Includes Battery, Rail and Remote): <388.0 gr ( 13.7 oz )Dimensions: 4.4” L x 3.3” W x 1.9” HSight Plane Above the Rail: 0.930”Color: TanWater Resistance: Waterproof to 1 MeterBattery Type: One (1) 3V CR123ABattery Life: Over 7 Hrs on Dual High IR Laser OnlyRanging Operation at 24C >2000 Ranges
LASER RANGE FINDER SPECIFICATIONS
Laser Range Finder: Eye Safe 1550 nmMinimum Range: 5 Meters
Max Range: Target Size Reflectivity 50% 0.5m x 2.0m 1500m
Range Accuracy: 1mDetection Probability: 90%Continuous Ranging: 1 Hz
LASER SPECIFICATIONS
RAPTAR-S (G01):Visible Aiming Laser Red (635) <.7 mW up to <5 mW Low, 25 mW Max High IR Aiming Laser <.7 mW Low, 100 mW Max High IR Illuminator <.7 mW Low, 100 mW Max High
RAPTAR-S, ES (G02):Visible Aiming Laser Red (635) <.7 mW, Low, 25 mW Max High IR Aiming Laser <.7 mW MaxIR Illuminator <.7 mW Max
USER INTERFACE SPECIFICATIONS
Display: 128x32 OLEDUser Interface: 5 Button Keypad
SENSOR SPECIFICATIONS
Temperature: +/- 1 degree CPressure: +/- 0.02 inHgHumidity: +/- 3 %RHInclination Measurement Accuracy: +/- 1 degreeCant Measurement Accuracy: +/- 1 degreeHeading Measurement Accuracy: +/- 5 degrees
BALLISTIC COMPUTER SPECIFICATIONS
Ballistics Solver: Full bullet flyout via 3DOF SolverAccuracy: 0.1 mils through Supersonic and Subsonic FlightDisplay: MILS, MOA, Clicks, InchesUnits: Metric, English, Mixed/DualCoriolis and Spin Drift: Computed using Heading and GPS CoordinatesDrag Curve Support: G1/G7/Applied Ballistics Custom Drag CurveBallistic Calibration: Muzzle Velocity and Drop Scale Calibration
3