wi oqc m2010 03 xx visual pcba
TRANSCRIPT
-
8/13/2019 Wi Oqc m2010 03 Xx Visual Pcba
1/2
Top Side
1) PCB crack, damage or broken.
2) Check for components high-up especially F1, C11 & L1
(0.5mm maximum).
3) Components (radial) not touch each other.
4) Components not out of PCB edge especially F1, C11, U1, D5,
Shield PCB, DZ2, C2, & L1.
5) Ensure no missing & correct for untestedparts:
C2, DZ2 & Shield PCB.
6) Ensure no missing Silicone Bond for Q1 & Shield PCB,
C2, ZR1 & ZR2, LED1 & R18.
7) Ensure no missing LED Spacer.
8) Ensure no Silicone Bond at unnecessary place (or dirty).
7 03
6 02
5 01
4 00
3 REV.
2 FILLER GAUGE 1
1 CALIPER 1
No. Qty Qty
REV DATE: 26 OCT. 05 FM-QAD-0010-REV-00
WORK INSTRUCTIONTITLE PCBA VISUAL INSPECTION MODEL
DOC. NO. WI-OQC-M2010-03-00PART NAME
CUSTOMER MASPRO
1 of 2
OQCPOWER SUPPLY
EFFECTIVE
DATE27-Feb-07
TKD003900STATION
PAGE
Visual /
INITIAL RELEASE27-Feb-07 MUKHZANI
Prepared by Reviewed by
REV. DATE Originator
Dept. Head Engineering
Part No. Description Description
Materials Jigs/ Fixtures/ Equipments
Visual
Production QA
REVISE CONTENT
Approval
Visual
Visual
Checking Point
Visual
Filler Gauge
Visual
Visual
Visual
Method
Top Side
Silicone Bond Condition
NG
OK Q1
Q1 Q1
C2C2
C2 C2
ZR2
F1
ZR1
L1
R18
C11
LED1
U1
D5
DZ2
C2ShieldPCB
Q1
SILICONE BOND
ZR2 ZR1
R18
LED1SILICONE BOND
ICT Test Mark
FCT Test Mark
HIPOT Test Mark
Powerware Test MarkOQC mark afterVisual Check
-
8/13/2019 Wi Oqc m2010 03 Xx Visual Pcba
2/2
Bottom Side
1) Check for lead length : 1.5mm ~ 2.5mm
2) Check for soldering condition overall.
3) Check for lifted pad, expose pad or broken trace.
4) Ensure no missing & correct for untestedparts: C6 & C7.
5)
6) Ensure no solder block the following hole:
a) GND(FG) pad c) N pad
b) +B(15.5V) pad d) L pad
7) Ensure no Silicone Bond at unnecessary place (or dirty).
* If all OK, re-pack and stamp OQC ACCEPTat the carton label.
If found 1 pc NG, return the lot (1 ctn) to Production forrescreen and action. QA Dept. Head may decide the affected
lots to rescreen based on the reject item and root cause.
Dimension (Pre-shipment Inspection)
1) Length, L: 89.5 ~ 89.8 mm
2) Width, W: 42.8 ~ 43.0 mm
3) Height, H: 25 mm max (F1).
4) Weight: 43.0 ~ 53.0 g
7 03
6 02
5 01
4 00
3 REV.
2 FILLER GAUGE 1
1 CALIPER 1
No. Qty Qty
REV DATE: 26 OCT. 05 FM-QAD-0010-REV-00
Part No. Description Description
Production QA
REVISE CONTENT
Balance
Visual
Visual
Visual
Visual
Materials Jigs/ Fixtures/ Equipments
Dept. Head Engineering
Approval
REV. DATE Originator
Prepared by Reviewed by
27-Feb-07 MUKHZANI INITIAL RELEASE
Checking Point
Electronic
Visual
Method
TKD003900STATION
PAGE 2 of 2
OQC
Caliper / Visual
PART NAMECUSTOMER MASPRO
POWER SUPPLYEFFECTIVE
DATE27-Feb-07
Caliper
Caliper
Caliper
Visual
WORK INSTRUCTIONTITLE PCBA VISUAL INSPECTION MODEL
DOC. NO. WI-OQC-M2010-03-00
Date Code: y m M d d *M for KAGA Malaysia
Eg: 27 Feb. 2007Date Code: 7 2 M 2 7Remark: Oct.: X, Nov.: Y, Dec.: Z
25mmmax.
Solder Ball UnnecessaryPin Hole Unnecessary
OtherNGcharacteristics
Bottom Side
7 2 M 2 7
DateCode
C6
C7
W = 42.8 ~ 43.0
L=8
9.5~89.8
GND(FG) Pad +B(15.5V) Pad
N Pad
L Pad
GND(FG) Pad
Y(Year) M(Month) M
7(2007) 2(Feb) KGM
Jan ~ Sep
Oct
Nov
Dec
1 ~ 9
X
Y
Z
DD(Day)
27