WHY  YOU  SHOULD  CONSIDER  BUYING  A  XDP Recreation,  LLC Product

Each  of  the  founders of  this  company,  have  over  30  years  experiencein  Outdoor  Play  and  Exercise  Equipment  – From  Backyard  Swing  Sets  to  Trampolines  to  Home  Exercise  Equipment,  in  the  USA.  Strong  Steel  Tubing,  Plastic  Resin  components  and  inspected  parts  with  an  understanding  of  the  need  for  Child  Safety  and  Fun,  on  a  very  durable  product.  They  raised  children,  so  they  have  a  true  understanding.

We  are  proud  of  our  Swing  Set  products.  Inside  the  carton  are  individual  swing  set  components  and  parts  that  are  individually  wrapped,  covered  and  packaged.  Nestled  tightly  together  to  eliminate  the  potential  ‘travel’  damage  that  might  occur  from  factory,  to  retailers  DC/Warehouse,  to  you.  We  use  Blow  Molded  – Double  Wall,  1  piece  slides,  with  a  ‘landing’  zone  for  safe  stopping  – just  like  at  the  School  Playground.  We  weld  the  top  bar  to  the  corner  bracket/component  to  enhance  the  strength  and  durability  of  the  FRAMES.  Clean  and  clear  holes  in  the  frame  assembly  for  self  alignment  and  easy  assembly.  Powder  coat  painted  Steel  Tubing.    UV  Protected  Plastic  Resin  components.  Detailed  Assembly  Manuals  with  complete  Customer  Service  backup,  just  for  you.  From  Swings  to  a  See-­‐Saw  to  Slides  to  Gliders  and  Trapeze  Swings,  and  more.  Safety  and  Fun  is  combined  in  all  our  Products  !  Please  see  more  about  our  products  on  our  website  at  www.xdp-­‐recreation.com .

Thank  you  for  giving  us  the  time  to  tell  you  about  XDP  Recreation  Products,  with  the  complete  understanding  of  Child  Safety  and  FUN,  built  into  these  Products.  

Safety,  Quality, FUN !  That’s XDP  Recreation,  LLC

BLOW  MOLDED,  1  pc,  Double  Wall,  Slide  with  “Landing”  Station.  Dual  

Handrails  and  Legs  

5’  Slide

6’  6”  Slide

“LANDING”Station.

6”  above  the  ground.Like  at  the  playground.

WELDED  Corner  /  Leg  Fitting  with  Self  Aligned  Hardware

Blow  Molded  “STAND  N  SWING”  And

Blow  Molded  Kid  Swing  with  ‘grip’  texture,  Non  

Slip,  on  seat  area.Both  with

Double  Loop  Chain  with  “Safe-­‐Touch”  Chain  Cover.

SEE-­‐SAW  for  two,  Firmly  attached  to  Frame  Leg,  with  Metal  Tube  “GRIP”  Handles  attached  to  SEAT

FOAM  LEG  PADDINGFor  User  Protection  on  all  Legs  on  XDP  Recreation    Swing  Sets

WHAT  WE  “DO”  and  “DON’T  DO”  – for  the  SAFETY and  good  of  kids  aged  3-­‐8

-­‐ WE  try  to  create  the  easiest  assembly  Process  to  the  Swing  Set  in  General-­‐ ONE  pc  Slide  for  STRENGTH  and  Easy  Assembly  with SAFE  “LANDING  ZONE”  – like  

at  the  School  yard.  Versus  a  Multi  Pc  1  hour-­‐ 20  minutes  assembly  process  JUST  FOR  A  SLIDE  that  lands  kids  into  the  ground  jamming  their  ankles.  NOT  SAFE  !

Or  a  Multi  Pc  Slide  that  has  your  kids  ankles  get  jammed  into  the  ground  to  stop  them  vs a  ‘safe  landing’  like  playground  designs  and  What  XDP  features  – feet  6-­‐10”  inches  above  the  ground  

XDP  Slide  with  LANDING  Spot

Multi  Piece  “Slide”    -­‐ with  more  than  15  pcs  to  assemble  – SLIDE  only

Imagine  if  not  assembled  properly  ??

OR  a  Fold-­‐Up  Slide  that  minimizes  the  strength  of  the  Slide  itself  as  well  as  challenges  the  consumer  to  put  it  together  correctly.  SAFE  FOR  YOUR  CHILD  ????