whmis training
DESCRIPTION
WHMIS TRAINING. INTRODUCTION. WHMIS Training will help employees gain the ability to recognize hazardous products used on the work site Once hazardous products are recognized training will assist employees how to: - PowerPoint PPT PresentationTRANSCRIPT
WHMIS TRAINING
INTRODUCTION
• WHMIS Training will help employees gain the ability to recognize hazardous products used on the work site
• Once hazardous products are recognized training will assist employees how to:
1. Locate information on the hazards and 2. Utilize proper handling techniques for
these materials
LEGISLATION
• WHMIS is enforced by a combination of federal and provincial legislation.
Federal legislation requires suppliers/importers of hazardous materials (controlled products) to provide adequate labels and MSDSs as a condition of sale and importation.
• Federal, provincial, and territorial Occupational Safety and Health (OSH) legislation requires employers to provide labels, MSDSs, and worker education programs in the workplace.
HAZARDOUS PRODUCT ACT The Hazardous Product Act has
issued regulations identifying:
1. What is a controlled product?2. Material Safety Data Sheets
[MSDS] required for the sale of controlled product
3. Information to be disclosed on an MSDS
4. Ingredient disclosure and identity5. Labeling requirements of
controlled products
CONTROLLED PRODUCTS REGULATIONS
A “Controlled Product” is defined as:Any product, material or substance
determined in accordance with Part IV of the Controlled Products Regulations to be included in the classes listed in Schedule II ofthe Hazardous Products Act.
WHMIS
WORKPLACE HAZARDOUS MATERIALS I NFORMATION SYSTEM
WHMIS OBJECTIVES
• Identify Hazardous materials on the work site
• Improve the communication of health hazard information of materials used on the work site
• Protect employees from exposure to hazardous materials through safety equipment, training, and procedures
CONSUMER PRODUCTS
• Consumer products can be controlled products under WHMIS
• Products such as Bleach, WD40, Paint and Glue are controlled products and therefore are subject to the WHMIS regulations
3 BASIC ELEMENTS OF WHMIS • Site Specific Training and Education
• Product Labels
• Material Safety Data Sheets [MSDS]
CONTROLLED PRODUCTS • WHMIS defines all substances
which fall within the WHMIS criteria as
“Controlled Products” whether they are substances which are brought into the worksite or are produced there.
• These products must have labels and a Material Safety Data Sheet [MSDS]
WHMIS SYMBOLS CONTROLLED PRODUCTS WILL BE IDENTIFIED BY ONE OR MORE OF THE FOLLOWING SYMBOLS
CLASS A: COMPRESSED GASThis class includes compressed
gases, dissolved gases, and gases
liquefied by compression or refrigeration
WHMIS SYMBOLS
CLASS B: FLAMMABLE AND COMBUSTIBLE MATERIAL
This class includes solids, liquids, and gases capable
of catching fire in the presence of a spark or open
flame under normal working conditions.
WHMIS SYMBOLS
CLASS C: OXIDIZING MATERIALThese materials increase the
risk of fire if they come in contact with flammable or combustible
materials.
WHMIS SYMBOLS
CLASS D: POISONOUS AND INFECTIOUS MATERIAL
Division 1: Materials Causing Immediate and Serious Toxic Effects
These materials can cause death or immediate
injury when a person is exposed to small amounts. Examples: sodium cyanide, hydrogen
sulphide
WHMIS SYMBOLS
CLASS D: POISONOUS AND INFECTIOUS MATERIAL
Division 2: Materials Causing Other Toxic EFFECTS
These materials can cause life-threatening and
serious long-term health problems as well as less
severe but immediate reactions in a person who
is repeatedly exposed to small amounts.
WHMIS SYMBOLS
CLASS D: POISONOUS AND INFECTIOUS MATERIAL
Division 3: Biohazardous Infectious MATERIAL
These materials contain harmful micro-organisms
that have been classified into Risk Groups 2, 3, and 4 as determined by
the World Health Organization (WHO) or the
MedicalResearch Council of Canada.
WHMIS SYMBOLS
CLASS E: CORROSIVE MATERIAL This class includes caustic and acid
materials that can destroy the skin or eat
through metals.
Examples: sodium hydroxide, hydrochloric acid,
nitric acid
WHMIS SYMBOLS
CLASS F: DANGEROUSLY REACTIVE MATERIAL
These products may self-react dangerously
(for example, they may explode) upon
standing or when exposed to physical shock
or to increased pressure or temperature, or
they emit toxic gases when exposed to
water.
WHMIS SYMBOLS
http://youtu.be/rOgS8gTATv8
MULTIPLE HAZARDS A controlled product can have
multiple hazards associated with it
Example: Methanol
SUPPLIER LABELS• All WHMIS content in a Supplier Label must
be within the standard dashed WHMIS border.
• Information contained on a Supplier Label must be in English and French, and include:
1. Product Identifier2. Supplier Identifier3. Hazard Symbols4. MSDS Statement5. Risk Phrases6. First Aid Measures7. Precautionary Measures
May also include
Trade Secret Exemption (if applicable) 3yr exemption
WORKPLACE LABELS
• Product Identifier
• Information on the Hazards and Safe Handling
• Statement that an MSDS is Available
• Workplace labels are required on containers for each controlled product
produced and used on-site,
• On secondary containers after a product has been transferred from the
original container, and
• On containers where the supplier label is missing or not readable
Information on a Workplace Label includes:
OTHER LABELS Other labels that may indicate that
a product is controlled can include:
NFPA or HMIS labels
Transportation of Dangerous Goods [TDG] labels
MATERIAL SAFETY DATA SHEETS [MSDS]
Material Safety Data Sheets [MSDS] are technicaldocuments that provide detailed and
comprehensiveinformation on controlled products.
Information provided includes:• Health Effects of Exposure• Hazard Evaluation regarding handling, storage
and use• Measures to protect employees who may be at
risk of exposure• Emergency Procedures
1. Product Identity2. Hazardous
Ingredients3. Physical and Chemical
Data4. Fire and Explosive
Data5. Reactivity Data6. Toxicological
Properties7. Preventative
Measures8. First Aid Measures9. Preparation Data
A properly prepared WHMIS Material Safety Data Sheet must have the following information
MATERIAL SAFETY DATA SHEETS [MSDS]
• When there is a change in the information or
new information is added, the Material Safety Data Sheet [MSDS] must be revised. This is the responsibility of the producer of the controlled product.
• A Material Safety Data Sheet [MSDS] must be
updated and replaced every three years,
whether or not there are any changes in the
information
MATERIAL SAFETY DATA SHEETS [MSDS]
• Material Safety Data Sheet format will vary from supplier to supplier
• A Material Safety Data Sheet [MSDS] is compliant with WHMIS as long a s all necessary information is disclosed.
• You may have a 9-section or a 16-section Material Safety Data Sheet
• Familiarize yourself where the Material Safety Data Sheets are kept within your worksite
MATERIAL SAFETY DATA SHEETS [MSDS]
SUPPLIER’S RESPONSIBILITIES
• To classify a product as a controlled or uncontrolled product
• Apply supplier label to all controlled products sold
• Provide a Material Safety Data Sheet [MSDS] for controlled products provided
EMPLOYER’S RESPONSIBILITIES
To provide the employee with:
• Material Safety Data Sheets [MSDS]
• Workplace Labels
• WHMIS Training
EMPLOYEE’S RESPONSIBILITY
• To participate in WHMIS training
• To apply the knowledge in the workplace
PHYSICAL STATES OF CHEMICALS
• Solids
• Liquid / Mists / Vapours
• Gases
ROUTES OF ENTRY
Hazardous Materials can enter the body through
• Inhalation
• Ingestion
• Absorption
• Injection
CONTROL OF HAZARDS
Hazards in the workplace can be controlled
• At the Source
• Along the Path
• At the Worker
TYPES OF PERSONAL PROTECTIVE EQUIPMENT
• Eye Glasses• Face Shields• Apron• Dust Mask• Cartridge
Respirator• Gloves• Supplied Air
Respirator• Chemical Footwear• Full Body Suit
CHOOSING THE CORRECT PERSONAL PROTECTIVE EQUIPMENT
• Consult the Materials Safety Data Sheet [MSDS]
• Review Supplier Label or Workplace Label on the controlled product being used
• Ask your supervisor for assistance if necessary
• http://www.worksafebc.com/publications/health_and_safety/whmis/assets/pdf/whmis_core_5.pdf