wheel loader liebherr 2plus2 l 550-l 586 - service manual
TRANSCRIPT
Service manual (20
Wheel loader (10 points)
L550 - L586 2plus2(10
en
����������
AddressAddress: LIEBHERR-WERK BISCHOFSHOFEN GMBH
Dr. Hans Liebherr – StraЯe 4 A – 5500 BISCHOFSHOFEN, AUSTRIA
Product identificationManufacturer: LIEBHERR-WERK BISCHOFSHOFEN GMBH
Product group: Wheel loader Type: L 550 L 556 L 566 L 576 L 580 L586
Construction number: 456 454 460 457 459 461Serial number: 99999 99999 14171 14171 14171 99999
Document identificationOrder number: xxxxxxxxx
Author: LBH / T-DOK department Document version: 01
Manual number: Owner:
Service manual (20
Wheel loader (10 points)
L550 - L586 2plus2(10
en
Foreword
Target group This Service Manual has been written for those whose job it is to make sure that the machines remain operational on a daily basis. This specifically includes the mechanics and workshop specialists at Liebherr dealers and Liebherr branch offices.
Contents In the first chapter you will find information about safety regulations as well as specifications of the special tools needed for maintenance and repair.
Chapter 2 provides an overview of all important technical data for the entire machine and the individual assemblies.
The following chapter, entitled Maintenance, contains the maintenance and inspection schedule, inspection and setting logs, lubrication schedules and filling quantity tables, a description of maintenance procedures and speci-fications for prescribed lubricants and fuels.
The technical description of the machine in the following chapters is divided into 15 functional groups. The design, function, and technical data for each group, component and part are explained.
Chapter 19 is new. In it, you will find a list of available repair manuals, troubleshooting hints, the service code table and a description of the BODEM service software.
How to use this manual This manual describes a variety of types and finished forms. In general, this information applies to the types and serial number groups specified in the footnotes. One exception is that specific type and serial number data are indicated at the beginning of each section (e.g. the technical specifications of the components).
Whenever possible, parts and components are supplemented by indication of the identification number in the heading.
This manual is available in German, English, French, Spanish and Italian.
Working instructions It is imperative that safety regulations be observed with all tasks done on the machine. You will find information on this in the General Informationchapter.
A complete set of tools in perfect condition is required for work on the machine, along with any special tools that might be needed. Absolute cleanliness must be observed with all tasks!
Sealing material such as O-rings and surface seals should be replaced whenever repairs are carried out.
DVD edition We would particularly like to draw your attention to the fact that this book is available not only in printed form, but also as an electronic document on DVD (Lidos).
General information 1
Product description 2
Maintenance 3
Diesel engine, pump distributor gear 4
Cooling system 5
Travel hydraulics 6
Working hydraulics 7
Steering system 8
Brake system 9
Electrical system 10
Transfer gear 11
Axles, drive shafts 12
Machine frame, ballast weight 13
Central lubrication system 14
Covering, cab access 15
Cab, heating, air-conditioning 16
Lift arm, quick-change device 17
Attachments, accessories 18
Repair work, troubleshooting 19
Options 20
L550 - 456 / from 99999 L576 - 457 / from 14171 1.0 -1 o f 2L556 - 454 / from 99999 L580 - 459 / from 14171 L566 - 460 / from 14171 L586 - 461 / from 99999
MJFCIFSS
1 General Information 1.0
Chapter contents
1 General Information ............................................................ 1.0-1
1.1 Safety regulations ...........................................................................1.1-1
1.1.1 Introduction...........................................................................1.1-1
1.1.2 Overview of the safety regulations .......................................1.1-2
1.2 Special tools for maintenance and repair work...............................1.2-1
1.2.1 Special tools in general ........................................................1.2-1
1.2.2 Special tools for Liebherr diesel engines..............................1.2-2
1.2.3 Special tools for hydraulic cylinders .....................................1.2-3
1.2.4 Special tools for electronics..................................................1.2-3
1.2.5 Special tools for axles...........................................................1.2-4
1.2.6 Special tools for the transmission.........................................1.2-5
1.2.7 Central lubrication system ....................................................1.2-5
1.2.8 Special tools for the air conditioning system ........................1.2-5
1.2.9 Special tools for cab windows ..............................................1.2-6
Service Manual General Information Special tools for maintenance and repair work
L550 - 456 / from 99999 L576 - 457 / from 14171 1.1 -1 o f 2L556 - 454 / from 99999 L580 - 459 / from 14171 L566 - 460 / from 14171 L586 - 461 / from 99999
MJFCIFSS
1.1 Safety regulations Working on the machine poses safety risks to the operator, driver or maintenance engineers. You can prevent risks and accidents by regularly reading and observing the various safety instructions.
This is especially important for personnel who only occasionally work on the machine, for example, carrying out rigging or maintenance work. The safety regulations listed below, if conscientiously followed, will ensure your own safety and that of others, and will prevent the machine from being damaged.
Whenever tasks which could cause danger to personnel or damage to the machine are described, the necessary safety precautions are explained in this manual.
These are indicated by the headings Danger, Warning or Caution.
1.1.1 Introduction
1. The symbols below have the following meanings:
Danger Warning that without appropriate precautions, certain procedures could result in fatal accidents.
WarningWarning that without appropriate precautions, certain procedures could result in severe physical injuries.
Caution Warning that without appropriate precautions, certain procedures could result in minor physical injuries or damage to the machine.
2. Observance of these instructions does not exempt you from following any additional rules and guidelines that may apply
The following should also be observed:
– The safety rules in force at the operating site – Legally enforceable road traffic regulations – Guidelines issued by trade associations
Danger
Warnin g
Caution
General Information Service Manual Safety regulations
1.1 -2 o f 2 L550 - 456 / from 99999 L576 - 457 / from 14171 L556 - 454 / from 99999 L580 - 459 / from 14171 L566 - 460 / from 14171 L586 - 461 / from 99999
MJFCIFSS
1.1.2 Overview of the safety regulations A detailed description of these can be read in the relevant section of the safety regulations chapter in the operating manual.
The following sections are included in the operating manual:
1 Introduction
2 General safety regulations
3 Proper use
4 Decals on the machine
5 Instructions on preventing crushing injuries and burns
6 Instructions on preventing fires and explosions
7 Safety instructions for start-up
8 Safety precautions during start-up
9 Instructions for safe working
10 Safety instructions for driving on slopes
11 Parking safely
12 Transporting the machine safely
13 Towing the machine safely
14 Measures for ensuring safe maintenance
15 Safety instructions for working on machines with hydro accumulators
16 Safety instructions for welding work on the machine
17 Instructions for working safely on the working attachment
18 Safety instructions for transporting the machine by crane
19 Safe maintenance of hydraulic hoses and hose lines
20 Attachments and accessories
21 Protection against vibrations
Service Manual General Information Special tools for maintenance and repair work
L550 - 456 / from 99999 L576 - 457 / from 14171 1.2 -1 o f 6L556 - 454 / from 99999 L580 - 459 / from 14171 L566 - 460 / from 14171 L586 - 461 / from 99999
MJFCIFSS
1.2 Special tools for maintenance and repair work
1.2.1 Special tools in general
Description ID no. Use Remarks
Anti-freeze and battery tester 7408922 All wheel loaders For checking the acid concentration (battery charging state) and anti-freeze
24 volt vacuum pump 7408148 All wheel loaders For preventing oil loss Filling and testing device with case 8145359 All wheel loaders For checking the hydro accumulator
Manometer 0-40 bar 7361288 All wheel loaders For checking the hydraulic pressure Manometer 0-250 bar 5002932 All wheel loaders For checking the hydraulic pressure Manometer 0-600 bar 5002866 All wheel loaders For checking the hydraulic pressure Manometer connection 7002436 All wheel loaders Connection for the manometer High pressure hose 1500 mm 7002475 All wheel loaders High pressure hose for manometer High pressure hose 4000 mm 7009134 All wheel loaders High pressure hose for manometer Screw connection M 10 x 1 5005180 All wheel loaders For checking the hydraulic pressure Draining hose 7005660 All wheel loaders For draining oil via a drain valve Drain piece 7402657 All wheel loaders For the drain hose
Safety cap SW 10 7009315 All wheel loaders For securing the valves on the variable adjustment motor
Safety cap SW 13 7615515 All wheel loaders For securing the valves on the pumps Safety cap SW 17 7615589 All wheel loaders For securing the valves on the pumps Safety cap SW 19 7009317 All wheel loaders For securing the valves on the pumps
Safety cap SW 17 7622068 All wheel loaders For securing the valves on the control block
USB dongle 10333608 L550 - L586 With SERVICE authorisation
Diagnostic data cable 10035410 L550 - L586 For adjusting the travel hydraulics, and testing the electrical system and options
Adapter cable RS232<>USB 693190714 All wheel loaders
For communicating with the wheel loader electronics if there is an error with the RS232 interface on the notebook.
Extraction tool size 20 for pin and bushing
8503630 All wheel loaders For DEUTSCH connectors
SDCF – 03 memory card adapter 10223098 L550 - L586 For writing to the compact flash card
Compact flash card 10223095 L550 - L586 Blank compact flash card. Data medium for application software
General Information Service Manual Special tools for maintenance and repair work
1.2 -2 o f 6 L550 - 456 / from 99999 L576 - 457 / from 14171 L556 - 454 / from 99999 L580 - 459 / from 14171 L566 - 460 / from 14171 L586 - 461 / from 99999
MJFCIFSS
1.2.2 Special tools for Liebherr diesel engines
Description ID no. Use Remarks
Mandrel 9078118 L550 - L556 engine For installing the mass equalisation shafts (D 934)
Mandrel 9078119 L550 - L556 engine For installing the mass equalisation shafts (D 934)
Rotary angle device 0524062 L550 - L586 engine For installing and removing the cylinder head
Holder 0528464 L550 - L586 engine For checking projection of the cylinder bushings
Dial gauge holder 10023885 L550 - L586 engine For checking projection of the cylinder bushings
Compression tester 8008782 L550 - L586 engine For checking the compression Compression tester insert 10012817 L550 - L586 engine For checking the compression Adapter 10297211 L550 - L586 engine For checking the compression Claw 10117612 L550 - L586 engine For checking the compression
Engine turner 0524045 L550 - L586 engine For installing and removing the pistons and rods
Holder 0528464 L550 - L586 engine For installing and removing the pistons and rods
Piston strap 8000592 L550 - L586 engine For installing and removing the pistons and rods
Rotary angle device 0524062 L550 - L586 engine For installing and removing the pistons and rods
Piston ring tongs 7009319 L550 - L586 engine For installing and removing the piston rings
Extractor tool 0526855 L550 - L586 engine For installing and removing the cylinder bushing
Extractor tool 0528462 L550 - L586 engine For installing and removing the cylinder bushing
Mounting pin 0528470 L550 - L586 engine For installing and removing crankshaft attachments
Hook and lever 7019858 L550 - L586 engine For installing and removing the front crankshaft seal
Inserter 10116249 L550 - L586 engine For installing and removing the front crankshaft seal
Mounting pin 0528470 L550 - L586 engine For installing and removing the flywheel
Inserter 10116250 L550 - L586 engine For installing and removing the rear crankshaft seal
Special spanner 10020852 L550 - L586 engine For installing and removing the injection line
Adapter 0524029 L550 - L586 engine For installing and removing the pressure pipe port and injection nozzles
Adapter 10220689 L550 - L586 engine For installing and removing the pressure pipe port and injection nozzles
Hammer puller 0524072 L550 - L586 engine For installing and removing the pressure pipe port and injection nozzles
Pusher tube 10289319 L550 - L586 engine For installing and removing the injection pump and roller tappet
Pusher tube 10289320 L550 - L586 engine For installing and removing the injection pump and roller tappet
Mounting pin 0528472 L550 - L586 engine For installing and removing the exhaust pipe
Service Manual General Information Special tools for maintenance and repair work
L550 - 456 / from 99999 L576 - 457 / from 14171 1.2 -3 o f 6L556 - 454 / from 99999 L580 - 459 / from 14171 L566 - 460 / from 14171 L586 - 461 / from 99999
MJFCIFSS
1.2.3 Special tools for hydraulic cylinders
Description ID no. Use Remarks
Assembly sleeve 80 mm 9227165 L550, L556 steering cylinder
For fitting the seals
Assembly sleeve 90 mm 9227161 L566, L576, L580 steering cylinder
For fitting the seals
Assembly sleeve 130 mm 9998624 L550, L556 lift cylinder For fitting the seals
Assembly sleeve 150 mm 9998622 L550, L556 tilt cylinder L566, L576, L580 lift cylinder
For fitting the seals
Assembly sleeve 170 mm 9107931 L566, L576, L580 tilt cylinder For fitting the seals
Expansion sleeve 80 mm 9227166 L550, L556 steering cylinder For fitting the seals
Expansion sleeve 90 mm 9227162 L566, L576, L580 steering cylinder For fitting the seals
Expansion sleeve 130 mm 9110408 L550, L556 lift cylinder For fitting the seals
Expansion sleeve 150 mm 9110410 L550, L556 tilt cylinder L566, L576, L580 lift cylinder
For fitting the seals
Expansion sleeve 170 mm 9110412 L566, L576, L580 tilt cylinder For fitting the seals
Bearing head assembly spanner 70/8 mm 9210219 L550, L556 steering
cylinder For fitting the piston rod bearing
Bearing head assembly spanner 75/12 mm
9239572 L566, L576, L580 steering cylinder
For fitting the piston rod bearing
1.2.4 Special tools for electronics
Description ID no. Use Remarks
Digital multimeter 8502956 All wheel loaders For measuring voltage, current, resistance and frequency
Test probe, red 884191214 All wheel loaders For testing DEUTSCH connectors Test probe, black 884191114 All wheel loaders For testing DEUTSCH connectors Magnet tester 8145743 All wheel loaders For checking solenoid valves Stripping and crimping pliers 0.5 - 6.0 mm2 8460263 All wheel loaders For MATE-N-LOK connectors
Crimping pliers 8503647 All wheel loaders For DEUTSCH connectors Wedge extractor tool 7026267 All wheel loaders For DEUTSCH connectors Extraction tool size 12 for pin and bushing 8145674 All wheel loaders For DEUTSCH connectors
Extraction tool size 16 for pin and bushing 8145673 All wheel loaders For DEUTSCH connectors
General Information Service Manual Special tools for maintenance and repair work
1.2 -4 o f 6 L550 - 456 / from 99999 L576 - 457 / from 14171 L556 - 454 / from 99999 L580 - 459 / from 14171 L566 - 460 / from 14171 L586 - 461 / from 99999
MJFCIFSS
1.2.5 Special tools for axles
Description ID no. Use RemarksHand pump 8145835 L550 - L586 axles For testing disc brakes for leaks
Collet 7009536 L550 - L586 axles For installing and removing the snap ring in the planetary drive
Spring hook 8145767 L550 - L586 axles For attaching and detaching the return springs
Slip bushing 260 mm 7017559 L556 front axle L556 rear axle
For fitting the brake piston
Slip bushing 315 mm 7017556 L566, L576 front axle L566, L576, L580 rear axle
For fitting the brake piston
Slip bushing M 90 x 1.5 mm
7017558 L556 rear axle For fitting ring gear carriers
Slip bushing M 110 x 1.5 mm
7017557 L556 front axle L566, L576 rear axle
For fitting ring gear carriers
Slip bushing M 130 x 1.5 mm
7017555 L566, L576, L580 front axle; L580 rear axle For fitting ring gear carriers
Handle 7017566 L550 - L580 axles Handle for mounting tool Handle 7011518 L550 - L580 axles Handle for various mounting tools Mounting tool 7017563 L556 rear axle For fitting cartridge seal ring
Mounting tool 7017560 L556, L566, L576, 580 front axle; L566, L576, L580 rear axle
For fitting cartridge seal ring
Centring bracket 7013775 L556 - L580 axles For groove nut spanner Groove nut spanner 111 mm 7009537 L556 rear axle For fitting the grooved nuts
Groove nut spanner 140 mm 7011251 L556 front axle L566, L576 rear axle
For fitting the grooved nuts
Groove nut spanner 169 mm 7013774 L566, L576, L580 front axle; L580 rear axle For fitting the grooved nuts
Measuring screw M 16 x 1.5
7019556 L556 front axle L556, L566, L576 rear axle
For measuring wear on the brake discs
Measuring screw M 16 x 1.5
8145771 L566, L576, L580 front axle; L580 rear axle For measuring wear on the brake discs
Clamp fork 7011522 L556 - L580 axles For fitting the drive flange Mounting tool 7013922 L556 - L580 axles For fitting the shaft seal ring Slotted nut spanner 81 mm
10017840 L550 - L580 axles For fitting the grooved nuts on the axle drive
Mounting tool (used with grip 7011518) 7624271 L550 axles, MT-L 3085 For fitting the dust protection axle insert
Mounting tool 7624272 L550 axles, MT-L 3085 For fitting the shaft seal ring axle insert
Centring bracket 10008138 L550 - L576 axles MT-L 3085-3105 For detaching the output
Socket wrench 10008139 L550 MT-L 3085 axles L556 rear axle
For detaching the output
Socket wrench 10218794 L550 MT-L 3085 front axle L556 - L576 axles For detaching the output
Clamp fork 10008140 L550 MT-L 3085 axles For removing and fitting the drive pinionSpecial tool kit for Hercules axles 10286181 L580 Hercules axles Contains the following items: 10286183
-10286198 Driver for lubrication and oil seal 10286183 L580 Hercules axles For fitting the lubrication and oil seal, to
be used with grip 10286788
Service Manual General Information Special tools for maintenance and repair work
L550 - 456 / from 99999 L576 - 457 / from 14171 1.2 -5 o f 6L556 - 454 / from 99999 L580 - 459 / from 14171 L566 - 460 / from 14171 L586 - 461 / from 99999
MJFCIFSS
Description ID no. Use Remarks3“ bushing driver with guide and grip 10286186 L580 Hercules axles For installing bushing, including grip
10286788
Grip for seal driver and shell 10286788 L580 Hercules axles For fitting the outer lip seal, to be used with appropriate driver
Driver for inner lip seal 10286189 L580 Hercules axles For fitting the inner lip seal, to be used with grip 10286788
Driver for wear bushing with guide
10286190 L580 Hercules axles For installing the wear bushing
Grooved nut socket 10286192 L580 Hercules axles For removing and fitting the grooved nuts
Seal holder installation tool 10286193 L580 Hercules axles For fitting the seal holder Driver for oil bearing casings, bevel gear 10286194 L580 Hercules axles For installing the bearing casings, bevel
gearDriver for grease seal and disc 10286195 L580 Hercules axles For fitting the grease seal and disc, to
be used with grip 10286788
Rolling apparatus 10286196 L580 Hercules axles For testing the rolling torque of the wheel hubs
Lifting tackle 10286197 L580 Hercules axles For removing the wheel hub Installation tool for Lifetime seal 10286198 L580 Hercules axles For fitting the Lifetime seal
1.2.6 Special tools for the transmission
Description ID no. Use Remarks
Fixing spanner 10016179 L550 - L586 For loosening and tightening the grooved nut on the coupling 1
Special socket 10016180 L550 - L586 For loosening and tightening the grooved nut on the coupling 1
Mounting tool 10016181 L550 - L586 For removing and attaching the snap ring on the couplings
1.2.7 Central lubrication system
Description ID no. Use Remarks
BEKA MAX filling press 10009239 All wheel loaders For quickly filling the BEKA Max reservoir
Groeneveld filling press 10333342 All wheel loaders For quickly filling the Groeneveld reservoir
Filling connection 7029283 All wheel loaders For filling the reservoir Grцneveld central lubricationdata cable 7624289 All wheel loaders For inspecting the central lubrication
system Grцneveld central lubricationplug adapter 7624290 All wheel loaders For inspecting the central lubrication
system
1.2.8 Special tools for the air conditioning system
Description ID no. Use Remarks
Vacuum pump 7027552 All wheel loaders For evacuating the air conditioning system
4-valve test fitting 7027558 All wheel loaders For testing, evacuating and filling the air conditioning system
Filling hose, blue 1500 mm 7027553 All wheel loaders For the test fitting
Filling hose, yellow 1500 mm 7027554 All wheel loaders For the test fitting
General Information Service Manual Special tools for maintenance and repair work
1.2 -6 o f 6 L550 - 456 / from 99999 L576 - 457 / from 14171 L556 - 454 / from 99999 L580 - 459 / from 14171 L566 - 460 / from 14171 L586 - 461 / from 99999
MJFCIFSS
Filling hose, red 1500 mm 7027555 All wheel loaders For the test fitting
Car coupling 253a 7027556 All wheel loaders For the test fitting
Car coupling 254a 7027557 All wheel loaders For the test fitting
1.2.9 Special tools for cab windows
Description ID no. Use Remarks
Complete tool box with suction pads 10021147 All wheel loaders For installing and removing windows
L566 - 460 / ab 14171 3.3L576 - 456 / ab 14171 L580 - 459 / ab 14171 MJFCIFSS
Customer:
Job site:
L566, L576, L580 Ser. Nr. /
Operating hours:
Type of application:
Checked by:
Checked on date:
Check / Adjustment UnitAdjust. values
Valuebefore adjust.
Valueafter
adjust.
Adjust. point
Testpoint
Operating temperature
Operating temperature (Temperature sensor – hydraulic oil)
°C 58 5
Cooling system
Cooling System (fan control)
Fan at high Diesel engine RPM / Sensor unplugged
Fan at high Diesel engine RPM / Prop. solenoid valve current less
bar
bar
165 5
220 101
P
P
Diesel engine
Adjustment - pedals
Gas pedal – angle sensor
Inching pedal – angle sensor
SCULI
Diesel engine RPM
Low idle RPM
High idle RPM
min-1
min-1
900 10
2065 10
Travel hydraulic
Replenishing pressure
At high idle RPM bar 34 1 3 G
High pressure relief valves
Forward
Reverse
bar
bar
470 10
470 10
2
4
MA
MB
Pressure cut off
High pressure
Engine speed drop, max. difference to high idle RPM
bar
min-1
430 5
30
1 MA (MB)
Display
Block curve at 930 min -1
Diesel engine RPM
High pressure
min-1
bar
930
50 10
930 930
SCULI MA (MB)
Block curve at 1200 min -1
Diesel engine RPM
High pressure
min-1
bar
1200
230 10
1200 1200
SCULI MA (MB)
Block curve at 1400 min -1
Diesel engine RPM
High pressure
min-1
bar
1400
330 10
1400 1400
SCULI MA (MB)
Adjustment var. displ. motor
Automatically adjustment of the variable displacement motors
SCULI
High pressure L566
High pressure L576, L580
Diesel engine RPM
bar
bar
min-1
340 10
350 10
1980 30
MA
MA
= Blocked Machine
3.3 L566 - 460 / ab 14171 L576 - 457 / ab 14171 L580 - 459 / ab 14171MJFCIFSS
Check and adjust only if required
Check / Adjustment UnitAdjust. values
Valuebefore adjust.
Valueafter
adjust.
Adjust. point
Testpoint
Working hydraulic
Control valve block
Secondary pressure relief valve, lift
Secondary pressure rel. valve, tilt in
Secondary pressure rel. valve, tilt out
Primary pressure relief valve
bar
bar
bar
bar
420 5
400 5
400 5
380 5
3
4
6
5
P
P
P
P
Control valve block
LS-Pressure cut off bar 350 5 7 P
Working hydraulic pump
Power regulator bar 180 10 1 M / M1
Working hydraulic pump
Flow regulator-Pressure difference bar 22 2 2 M / LS
Stabilization module
Shut off pressure (LFD – turned off) bar 120 20 MX
Hydro accumulator LFD
Pretension pressure (nitrogen filling) bar 25 2 9 9
Steering system
Variable displacement pump
Pressure cut off bar 210 5 2 P
Variable displacement pump
Flow regulator – Pressure difference bar 22 2 1 P / LS
Brake system
Compact brake valve
Cut in pressure
Cut out pressure
Brake pressure in axles L566, L576
Brake pressure in axles L580
bar
bar
bar
bar
180 5
210 5
95 5
70 5
1
1
2
2
M3
M3
M4 / M5
M4 / M5
Accumulator
After 9 braking actions bar > 50 M4 / M5
Pressure switch - brake system
Switching point bar 120 5 M3
Transfer gear
Transfer gear
Switching pressure bar 20 3 P
Preload pressure (nitrogen filling) bar 12 2 1
Remarks: Signature:
Service Manual Maintenance Tests and adjustments
L550 - 456 / from XXXXX L580 - 459 / from 14171 1 of 3L556 - 454 / from XXXXX L586 - 461 / from XXXXX L566 - 460 / from 14171 L576 - 457 / from 14171
MJFCIFSS
Brief description of adjustment work, L566 - L580
Bringing the machine up to operating temperature
The operating temperature is 58 5 °C . The temperature is measured by the hydraulic oil sensor and can be seen in Sculi .
Procedure
Cover the hydraulic oil cooler 1 with a box 2 or something similar. Bring the machine up to operating temperature using the working hydraulics
and the travel hydraulics. Warming up using the working hydraulics creates a good mixture in the hydraulic tank so that the temperature can be accurately measured.
Checking the fan motor and the fan control
Procedure
Unplug the hydraulic oil temperature sensor. At upper idling speed, check that the pressure is 165 ±5 bar.
If it is correct, there is no need for the second test (220 ±10 bar).
If it is not correct: Select the parameter Cooling system – solenoid valve output currentand set the current to 0 mA.
At upper idling speed, check that the pressure is 220 ±10 bar. If it is not correct:
Adjust the proportional pressure relief valve When you switch off the ignition after testing or adjusting, the parameter Cooling system – solenoid valve output current is automatically reset to the previous value.
Checking the diesel engine speed The diesel engine speed is set by fixed parameters in the master electronics. It only needs to be checked.
Procedure
Check that the top and bottom engine speeds are correct. If they are not correct:
Calibrate the gas pedal angle sensor and check the speed again.
Calibrating the gas pedal angle sensor The teaching curve no longer has to be recorded. The master electronics only have to detect the end positions of the angle sensor.
Procedure
Set the parameter Gas pedal - start calibration to 1. Push the gas pedal all the way down.
The master electronics detect the position of the angle sensor. The para-meter Gas pedal – start calibration automatically switches back to 0 after 15 seconds, or you can do it manually. Then select Gas pedal – set value and check that 0 % and 100 %
are attained.
Maintenance Service Manual Battery installation
2 o f 3 L550 - 456 / from XXXXX L566 - 460 / from 14171 L556 - 454 / from XXXXX L576 - 457 / from 14171
L580 - 459 / from 14171 L586 - 461 / from XXXXX
MJFCIFSS
Calibrating the inch pedal angle sensor
Procedure
Set the parameter Inch pedal – start calibration to 1. Push the inch pedal all the way down.
The master electronics detect the position of the angle sensor. The para-meter Inch pedal – start calibration automatically switches back to 0 after 15 seconds, or you can do it manually. Then select Inch pedal – set value and check that 0 % and 100 %
are attained.
Calibrating the block curve
Procedure Set the parameter Inch pedal – function OFF to 1 (inching is deactivated). Select fixed gear 2 and forward travel, and hold the machine in the
blocked condition using the service brake. Increase the engine speed to 930 min-1, 1200 min-1 and 1400 min-1 and
check the high pressure according to the adjustment checklist. If it is not correct:
Adjust the parameter Travel pump – current at 900 / 1200 / 1400 1/min until the high pressure is correct.
Set the parameter Inch pedal – function OFF back to 0.
Calibrating the variable displacement motors
The variable displacement motors are calibrated automatically by the master electronics.
Procedure
Start up the engine. The parking brake must be activated. Set the parameter Travel motors – start calibration to 1.
The master electronics raise the engine speed to 1000 min-1 and adjust the cur-rent to the variable displacement motors until they reach the required speed. When the calibration is completed, you must switch the ignition off and
on again.
Checking the diesel engine power Before you check the power of the engine, you must carry out the follow-ing tasks: – Tasks in maintenance schedule (air filter, fuel filter etc.)
– Check the operating pressures according to the adjustment checklist – The machine must be at operating temperature
Procedure
Connect a manometer (600 bar) to the test connection MA. Set the parameter Inch pedal – function OFF to 1. Start the machine, select fixed gear 2 and forward travel direction. Hold the machine with the service brake and run it at full throttle. Slowly release the service brake until the machine moves at a speed
13 km/h. Check that the set values for pressure and engine speed are reached.
Service Manual Maintenance Tests and adjustments
L550 - 456 / from XXXXX L580 - 459 / from 14171 3 of 3L556 - 454 / from XXXXX L586 - 461 / from XXXXX L566 - 460 / from 14171 L576 - 457 / from 14171
MJFCIFSS
If they are not correct: Troubleshoot the engine: air filter, fuel filter etc. Troubleshoot the travel hydraulics: check the operating pressure etc.
Then set the parameter Inch pedal – function OFF back to 0.
© LIEBHERR WERK EHINGENforbidden.to third parties without express authority is strictlytion contained therein. Reproduction, use or disclosureWe reserve all rights in this document and in the informa-
© LIEBHERR WERK EHINGENsind ohne unsere ausdrьckliche Zustimmung verboten.Bekanntgabe an Dritte oder Verwertung seines Inhaltesstand behalten wir uns alle Rechte vor. Vervielfдltigung,Fьr dieses Dokument und den darin dargestellten Gegen-
PROJ:
© LIEBHERR WERK EHINGENforbidden.to third parties without express authority is strictlytion contained therein. Reproduction, use or disclosureWe reserve all rights in this document and in the informa-
© LIEBHERR WERK EHINGENsind ohne unsere ausdrьckliche Zustimmung verboten.Bekanntgabe an Dritte oder Verwertung seines Inhaltesstand behalten wir uns alle Rechte vor. Vervielfдltigung,Fьr dieses Dokument und den darin dargestellten Gegen-
PROJ:
Kl. 15
© LIEBHERR WERK EHINGENforbidden.to third parties without express authority is strictlytion contained therein. Reproduction, use or disclosureWe reserve all rights in this document and in the informa-
© LIEBHERR WERK EHINGENsind ohne unsere ausdrьckliche Zustimmung verboten.Bekanntgabe an Dritte oder Verwertung seines Inhaltesstand behalten wir uns alle Rechte vor. Vervielfдltigung,Fьr dieses Dokument und den darin dargestellten Gegen-
PROJ:
Input Modul 3
Input Modul 1
Output Modul 2
Output Modul 1
© LIEBHERR WERK EHINGENforbidden.to third parties without express authority is strictlytion contained therein. Reproduction, use or disclosureWe reserve all rights in this document and in the informa-
© LIEBHERR WERK EHINGENsind ohne unsere ausdrьckliche Zustimmung verboten.Bekanntgabe an Dritte oder Verwertung seines Inhaltesstand behalten wir uns alle Rechte vor. Vervielfдltigung,Fьr dieses Dokument und den darin dargestellten Gegen-
PROJ:
/26.B2Kl. 30.F08
/7.A4 Kl.30.F07
/5.E3 kl.61. /D+
/36.C6 A9 Kl.15
/37.B6 X Verb.
A9 Wegfahrsperre Kl. 15
© LIEBHERR WERK EHINGENforbidden.to third parties without express authority is strictlytion contained therein. Reproduction, use or disclosureWe reserve all rights in this document and in the informa-
© LIEBHERR WERK EHINGENsind ohne unsere ausdrьckliche Zustimmung verboten.Bekanntgabe an Dritte oder Verwertung seines Inhaltesstand behalten wir uns alle Rechte vor. Vervielfдltigung,Fьr dieses Dokument und den darin dargestellten Gegen-
PROJ:
/6.D3 Kl.58aL
/6.E4 Kl.58aL
/6.D3 Kl.58aL
/6.D6 Kl.58aR
/6.E5 Kl.58aR
/6.D7 Kl.58aR
/6.C8 Kl.58aR
/14.A4F15.2
/4.F5 kl.61. /D+ Reserve nur fьrextere Erregung
Kl.30
V10
Kl.15
V8
© LIEBHERR WERK EHINGENforbidden.to third parties without express authority is strictlytion contained therein. Reproduction, use or disclosureWe reserve all rights in this document and in the informa-
© LIEBHERR WERK EHINGENsind ohne unsere ausdrьckliche Zustimmung verboten.Bekanntgabe an Dritte oder Verwertung seines Inhaltesstand behalten wir uns alle Rechte vor. Vervielfдltigung,Fьr dieses Dokument und den darin dargestellten Gegen-
PROJ:
/5.E5Kl.58aL
/5.E5Kl.58aL
/5.E6Kl.58aL
/5.E6Kl.58aR
/5.E6Kl.58aR
/5.E6Kl.58aR
/5.E7Kl.58aR
/7.E5Kl.49
/7.E6Kl.49
/7.E5Kl.49
/7.E7Kl.49
/7.B5Kl.49aL
/7.B5Kl.49aR
/7.E7Kl.49a-S3.X2
/12.E4X1.37
/12.E4X1.37
/21.E8B12.1
Kl.15
© LIEBHERR WERK EHINGENforbidden.to third parties without express authority is strictlytion contained therein. Reproduction, use or disclosureWe reserve all rights in this document and in the informa-
© LIEBHERR WERK EHINGENsind ohne unsere ausdrьckliche Zustimmung verboten.Bekanntgabe an Dritte oder Verwertung seines Inhaltesstand behalten wir uns alle Rechte vor. Vervielfдltigung,Fьr dieses Dokument und den darin dargestellten Gegen-
PROJ:
© LIEBHERR WERK EHINGENforbidden.to third parties without express authority is strictlytion contained therein. Reproduction, use or disclosureWe reserve all rights in this document and in the informa-
© LIEBHERR WERK EHINGENsind ohne unsere ausdrьckliche Zustimmung verboten.Bekanntgabe an Dritte oder Verwertung seines Inhaltesstand behalten wir uns alle Rechte vor. Vervielfдltigung,Fьr dieses Dokument und den darin dargestellten Gegen-
PROJ:
V11
V12
V13
V15
V14
/6.A1 Kl.49a
/6.E5 Kl.49
/6.D2 Kl.49
/6.E4 Kl.49
/6.D7 Kl.49
Lenkstockschalter
E4 / H16 rechts vorne
E3 / H15 links vorne
E5 / H17 links hinten
E1 / H18 rechts hinten
F07a Kl. 30
F07b-KL. 15
© LIEBHERR WERK EHINGENforbidden.to third parties without express authority is strictlytion contained therein. Reproduction, use or disclosureWe reserve all rights in this document and in the informa-
© LIEBHERR WERK EHINGENsind ohne unsere ausdrьckliche Zustimmung verboten.Bekanntgabe an Dritte oder Verwertung seines Inhaltesstand behalten wir uns alle Rechte vor. Vervielfдltigung,Fьr dieses Dokument und den darin dargestellten Gegen-
PROJ:
ws-bl
sw-bl
bl
sw
ws-bl
sw-bl
bl
sw
664
-V2.X2
V59
Kl.15
Kl.15
© LIEBHERR WERK EHINGENforbidden.to third parties without express authority is strictlytion contained therein. Reproduction, use or disclosureWe reserve all rights in this document and in the informa-
© LIEBHERR WERK EHINGENsind ohne unsere ausdrьckliche Zustimmung verboten.Bekanntgabe an Dritte oder Verwertung seines Inhaltesstand behalten wir uns alle Rechte vor. Vervielfдltigung,Fьr dieses Dokument und den darin dargestellten Gegen-
PROJ:
V16
V17
Kl. 30
Kl. 15
Kl. 30
Kl. 15
© LIEBHERR WERK EHINGENforbidden.to third parties without express authority is strictlytion contained therein. Reproduction, use or disclosureWe reserve all rights in this document and in the informa-
© LIEBHERR WERK EHINGENsind ohne unsere ausdrьckliche Zustimmung verboten.Bekanntgabe an Dritte oder Verwertung seines Inhaltesstand behalten wir uns alle Rechte vor. Vervielfдltigung,Fьr dieses Dokument und den darin dargestellten Gegen-
PROJ:
V18
V19
Kl. 30
Kl. 15
Kl. 30
Kl. 15
/11.A7 X58
© LIEBHERR WERK EHINGENforbidden.to third parties without express authority is strictlytion contained therein. Reproduction, use or disclosureWe reserve all rights in this document and in the informa-
© LIEBHERR WERK EHINGENsind ohne unsere ausdrьckliche Zustimmung verboten.Bekanntgabe an Dritte oder Verwertung seines Inhaltesstand behalten wir uns alle Rechte vor. Vervielfдltigung,Fьr dieses Dokument und den darin dargestellten Gegen-
PROJ:
V20
V21
Kl. 30
Kl. 15
Kl. 30
Kl. 15
/10.C8 X58
© LIEBHERR WERK EHINGENforbidden.to third parties without express authority is strictlytion contained therein. Reproduction, use or disclosureWe reserve all rights in this document and in the informa-
© LIEBHERR WERK EHINGENsind ohne unsere ausdrьckliche Zustimmung verboten.Bekanntgabe an Dritte oder Verwertung seines Inhaltesstand behalten wir uns alle Rechte vor. Vervielfдltigung,Fьr dieses Dokument und den darin dargestellten Gegen-
PROJ:
/6.A8 X1.37
/6.A8 X1.37
Verb.
Kl. 30
V58
Kl. 15
V57
Rueckfahrscheinwerfer
© LIEBHERR WERK EHINGENforbidden.to third parties without express authority is strictlytion contained therein. Reproduction, use or disclosureWe reserve all rights in this document and in the informa-
© LIEBHERR WERK EHINGENsind ohne unsere ausdrьckliche Zustimmung verboten.Bekanntgabe an Dritte oder Verwertung seines Inhaltesstand behalten wir uns alle Rechte vor. Vervielfдltigung,Fьr dieses Dokument und den darin dargestellten Gegen-
PROJ:
/14.B6Kl.15 /7.A4Kl.30
/14.B6Kl.15
Kl. 15
© LIEBHERR WERK EHINGENforbidden.to third parties without express authority is strictlytion contained therein. Reproduction, use or disclosureWe reserve all rights in this document and in the informa-
© LIEBHERR WERK EHINGENsind ohne unsere ausdrьckliche Zustimmung verboten.Bekanntgabe an Dritte oder Verwertung seines Inhaltesstand behalten wir uns alle Rechte vor. Vervielfдltigung,Fьr dieses Dokument und den darin dargestellten Gegen-
PROJ:
/13.E3Kl.15
/13.E8Kl.15
Kl. 15
Kl. 15
© LIEBHERR WERK EHINGENforbidden.to third parties without express authority is strictlytion contained therein. Reproduction, use or disclosureWe reserve all rights in this document and in the informa-
© LIEBHERR WERK EHINGENsind ohne unsere ausdrьckliche Zustimmung verboten.Bekanntgabe an Dritte oder Verwertung seines Inhaltesstand behalten wir uns alle Rechte vor. Vervielfдltigung,Fьr dieses Dokument und den darin dargestellten Gegen-
PROJ:
/26.E3 Kl. 15
Kl. 15
© LIEBHERR WERK EHINGENforbidden.to third parties without express authority is strictlytion contained therein. Reproduction, use or disclosureWe reserve all rights in this document and in the informa-
© LIEBHERR WERK EHINGENsind ohne unsere ausdrьckliche Zustimmung verboten.Bekanntgabe an Dritte oder Verwertung seines Inhaltesstand behalten wir uns alle Rechte vor. Vervielfдltigung,Fьr dieses Dokument und den darin dargestellten Gegen-
PROJ:
/36.C6 A9 Kl.30
Kl. 30
Kl. 15
Kl. 30
Wegfahrsperre Kl.30
© LIEBHERR WERK EHINGENforbidden.to third parties without express authority is strictlytion contained therein. Reproduction, use or disclosureWe reserve all rights in this document and in the informa-
© LIEBHERR WERK EHINGENsind ohne unsere ausdrьckliche Zustimmung verboten.Bekanntgabe an Dritte oder Verwertung seines Inhaltesstand behalten wir uns alle Rechte vor. Vervielfдltigung,Fьr dieses Dokument und den darin dargestellten Gegen-
PROJ:
Kl. 15
Kl. 15
Kl. 15
© LIEBHERR WERK EHINGENforbidden.to third parties without express authority is strictlytion contained therein. Reproduction, use or disclosureWe reserve all rights in this document and in the informa-
© LIEBHERR WERK EHINGENsind ohne unsere ausdrьckliche Zustimmung verboten.Bekanntgabe an Dritte oder Verwertung seines Inhaltesstand behalten wir uns alle Rechte vor. Vervielfдltigung,Fьr dieses Dokument und den darin dargestellten Gegen-
PROJ:
/34.C1 Kl.15Verb.
Kl. 15
Kl. 15
Kl. 15
© LIEBHERR WERK EHINGENforbidden.to third parties without express authority is strictlytion contained therein. Reproduction, use or disclosureWe reserve all rights in this document and in the informa-
© LIEBHERR WERK EHINGENsind ohne unsere ausdrьckliche Zustimmung verboten.Bekanntgabe an Dritte oder Verwertung seines Inhaltesstand behalten wir uns alle Rechte vor. Vervielfдltigung,Fьr dieses Dokument und den darin dargestellten Gegen-
PROJ:
Kl. 15
Kl. 15
© LIEBHERR WERK EHINGENforbidden.to third parties without express authority is strictlytion contained therein. Reproduction, use or disclosureWe reserve all rights in this document and in the informa-
© LIEBHERR WERK EHINGENsind ohne unsere ausdrьckliche Zustimmung verboten.Bekanntgabe an Dritte oder Verwertung seines Inhaltesstand behalten wir uns alle Rechte vor. Vervielfдltigung,Fьr dieses Dokument und den darin dargestellten Gegen-
PROJ:
=H+H/18.C3Splice.X2.F43 KL. 15
Kl. 15
Kl. 15
© LIEBHERR WERK EHINGENforbidden.to third parties without express authority is strictlytion contained therein. Reproduction, use or disclosureWe reserve all rights in this document and in the informa-
© LIEBHERR WERK EHINGENsind ohne unsere ausdrьckliche Zustimmung verboten.Bekanntgabe an Dritte oder Verwertung seines Inhaltesstand behalten wir uns alle Rechte vor. Vervielfдltigung,Fьr dieses Dokument und den darin dargestellten Gegen-
PROJ:
=K+K/6.D1 B12.1Bremslicht
© LIEBHERR WERK EHINGENforbidden.to third parties without express authority is strictlytion contained therein. Reproduction, use or disclosureWe reserve all rights in this document and in the informa-
© LIEBHERR WERK EHINGENsind ohne unsere ausdrьckliche Zustimmung verboten.Bekanntgabe an Dritte oder Verwertung seines Inhaltesstand behalten wir uns alle Rechte vor. Vervielfдltigung,Fьr dieses Dokument und den darin dargestellten Gegen-
PROJ:
Verb.
Kl. 30
Kl. 30
Kl. 15
V216
© LIEBHERR WERK EHINGENforbidden.to third parties without express authority is strictlytion contained therein. Reproduction, use or disclosureWe reserve all rights in this document and in the informa-
© LIEBHERR WERK EHINGENsind ohne unsere ausdrьckliche Zustimmung verboten.Bekanntgabe an Dritte oder Verwertung seines Inhaltesstand behalten wir uns alle Rechte vor. Vervielfдltigung,Fьr dieses Dokument und den darin dargestellten Gegen-
PROJ:
Kl. 30
© LIEBHERR WERK EHINGENforbidden.to third parties without express authority is strictlytion contained therein. Reproduction, use or disclosureWe reserve all rights in this document and in the informa-
© LIEBHERR WERK EHINGENsind ohne unsere ausdrьckliche Zustimmung verboten.Bekanntgabe an Dritte oder Verwertung seines Inhaltesstand behalten wir uns alle Rechte vor. Vervielfдltigung,Fьr dieses Dokument und den darin dargestellten Gegen-
PROJ:
/25.F1 F19 Kl. 15.Kl. 15
Verb.
Kl. 30
Kl. 15
© LIEBHERR WERK EHINGENforbidden.to third parties without express authority is strictlytion contained therein. Reproduction, use or disclosureWe reserve all rights in this document and in the informa-
© LIEBHERR WERK EHINGENsind ohne unsere ausdrьckliche Zustimmung verboten.Bekanntgabe an Dritte oder Verwertung seines Inhaltesstand behalten wir uns alle Rechte vor. Vervielfдltigung,Fьr dieses Dokument und den darin dargestellten Gegen-
PROJ:
/24.E8 F19 Kl. 15.Kl. 15
© LIEBHERR WERK EHINGENforbidden.to third parties without express authority is strictlytion contained therein. Reproduction, use or disclosureWe reserve all rights in this document and in the informa-
© LIEBHERR WERK EHINGENsind ohne unsere ausdrьckliche Zustimmung verboten.Bekanntgabe an Dritte oder Verwertung seines Inhaltesstand behalten wir uns alle Rechte vor. Vervielfдltigung,Fьr dieses Dokument und den darin dargestellten Gegen-
PROJ:
=K+K/4.C4Kl. 30.F08
=K+K/15.E2 Kl. 15
GND ьber Masseband
© LIEBHERR WERK EHINGENforbidden.to third parties without express authority is strictlytion contained therein. Reproduction, use or disclosureWe reserve all rights in this document and in the informa-
© LIEBHERR WERK EHINGENsind ohne unsere ausdrьckliche Zustimmung verboten.Bekanntgabe an Dritte oder Verwertung seines Inhaltesstand behalten wir uns alle Rechte vor. Vervielfдltigung,Fьr dieses Dokument und den darin dargestellten Gegen-
PROJ:
B13 Steckverbindung DeutschL564 - L584
© LIEBHERR WERK EHINGENforbidden.to third parties without express authority is strictlytion contained therein. Reproduction, use or disclosureWe reserve all rights in this document and in the informa-
© LIEBHERR WERK EHINGENsind ohne unsere ausdrьckliche Zustimmung verboten.Bekanntgabe an Dritte oder Verwertung seines Inhaltesstand behalten wir uns alle Rechte vor. Vervielfдltigung,Fьr dieses Dokument und den darin dargestellten Gegen-
PROJ:
© LIEBHERR WERK EHINGENforbidden.to third parties without express authority is strictlytion contained therein. Reproduction, use or disclosureWe reserve all rights in this document and in the informa-
© LIEBHERR WERK EHINGENsind ohne unsere ausdrьckliche Zustimmung verboten.Bekanntgabe an Dritte oder Verwertung seines Inhaltesstand behalten wir uns alle Rechte vor. Vervielfдltigung,Fьr dieses Dokument und den darin dargestellten Gegen-
PROJ:
Kl.15
© LIEBHERR WERK EHINGENforbidden.to third parties without express authority is strictlytion contained therein. Reproduction, use or disclosureWe reserve all rights in this document and in the informa-
© LIEBHERR WERK EHINGENsind ohne unsere ausdrьckliche Zustimmung verboten.Bekanntgabe an Dritte oder Verwertung seines Inhaltesstand behalten wir uns alle Rechte vor. Vervielfдltigung,Fьr dieses Dokument und den darin dargestellten Gegen-
PROJ:
© LIEBHERR WERK EHINGENforbidden.to third parties without express authority is strictlytion contained therein. Reproduction, use or disclosureWe reserve all rights in this document and in the informa-
© LIEBHERR WERK EHINGENsind ohne unsere ausdrьckliche Zustimmung verboten.Bekanntgabe an Dritte oder Verwertung seines Inhaltesstand behalten wir uns alle Rechte vor. Vervielfдltigung,Fьr dieses Dokument und den darin dargestellten Gegen-
PROJ:
© LIEBHERR WERK EHINGENforbidden.to third parties without express authority is strictlytion contained therein. Reproduction, use or disclosureWe reserve all rights in this document and in the informa-
© LIEBHERR WERK EHINGENsind ohne unsere ausdrьckliche Zustimmung verboten.Bekanntgabe an Dritte oder Verwertung seines Inhaltesstand behalten wir uns alle Rechte vor. Vervielfдltigung,Fьr dieses Dokument und den darin dargestellten Gegen-
PROJ:
Kl. 15
© LIEBHERR WERK EHINGENforbidden.to third parties without express authority is strictlytion contained therein. Reproduction, use or disclosureWe reserve all rights in this document and in the informa-
© LIEBHERR WERK EHINGENsind ohne unsere ausdrьckliche Zustimmung verboten.Bekanntgabe an Dritte oder Verwertung seines Inhaltesstand behalten wir uns alle Rechte vor. Vervielfдltigung,Fьr dieses Dokument und den darin dargestellten Gegen-
PROJ:
© LIEBHERR WERK EHINGENforbidden.to third parties without express authority is strictlytion contained therein. Reproduction, use or disclosureWe reserve all rights in this document and in the informa-
© LIEBHERR WERK EHINGENsind ohne unsere ausdrьckliche Zustimmung verboten.Bekanntgabe an Dritte oder Verwertung seines Inhaltesstand behalten wir uns alle Rechte vor. Vervielfдltigung,Fьr dieses Dokument und den darin dargestellten Gegen-
PROJ:
=H+H/18.E1Kl.15
RD
RD
BN
BN
X56/11 F3475A
© LIEBHERR WERK EHINGENforbidden.to third parties without express authority is strictlytion contained therein. Reproduction, use or disclosureWe reserve all rights in this document and in the informa-
© LIEBHERR WERK EHINGENsind ohne unsere ausdrьckliche Zustimmung verboten.Bekanntgabe an Dritte oder Verwertung seines Inhaltesstand behalten wir uns alle Rechte vor. Vervielfдltigung,Fьr dieses Dokument und den darin dargestellten Gegen-
PROJ:
© LIEBHERR WERK EHINGENforbidden.to third parties without express authority is strictlytion contained therein. Reproduction, use or disclosureWe reserve all rights in this document and in the informa-
© LIEBHERR WERK EHINGENsind ohne unsere ausdrьckliche Zustimmung verboten.Bekanntgabe an Dritte oder Verwertung seines Inhaltesstand behalten wir uns alle Rechte vor. Vervielfдltigung,Fьr dieses Dokument und den darin dargestellten Gegen-
PROJ:
=K+K/16.E5A9 Kl.30
=K+K/4.A1A9 Kl.15
Verb.
F26 A4.X40:9
ZьndstartschloЯ S1.X1:6
Massepunkt MP6 Kabine
© LIEBHERR WERK EHINGENforbidden.to third parties without express authority is strictlytion contained therein. Reproduction, use or disclosureWe reserve all rights in this document and in the informa-
© LIEBHERR WERK EHINGENsind ohne unsere ausdrьckliche Zustimmung verboten.Bekanntgabe an Dritte oder Verwertung seines Inhaltesstand behalten wir uns alle Rechte vor. Vervielfдltigung,Fьr dieses Dokument und den darin dargestellten Gegen-
PROJ:
=K+K/4.F7X F8 10A Kl. 58 A4.X57/4
© LIEBHERR WERK EHINGENforbidden.to third parties without express authority is strictlytion contained therein. Reproduction, use or disclosureWe reserve all rights in this document and in the informa-
© LIEBHERR WERK EHINGENsind ohne unsere ausdrьckliche Zustimmung verboten.Bekanntgabe an Dritte oder Verwertung seines Inhaltesstand behalten wir uns alle Rechte vor. Vervielfдltigung,Fьr dieses Dokument und den darin dargestellten Gegen-
PROJ:
© LIEBHERR WERK EHINGENforbidden.to third parties without express authority is strictlytion contained therein. Reproduction, use or disclosureWe reserve all rights in this document and in the informa-
© LIEBHERR WERK EHINGENsind ohne unsere ausdrьckliche Zustimmung verboten.Bekanntgabe an Dritte oder Verwertung seines Inhaltesstand behalten wir uns alle Rechte vor. Vervielfдltigung,Fьr dieses Dokument und den darin dargestellten Gegen-
PROJ:
Input Modul 3
Input Modul 1
Output Modul 2
Output Modul 1
© LIEBHERR WERK EHINGENforbidden.to third parties without express authority is strictlytion contained therein. Reproduction, use or disclosureWe reserve all rights in this document and in the informa-
© LIEBHERR WERK EHINGENsind ohne unsere ausdrьckliche Zustimmung verboten.Bekanntgabe an Dritte oder Verwertung seines Inhaltesstand behalten wir uns alle Rechte vor. Vervielfдltigung,Fьr dieses Dokument und den darin dargestellten Gegen-
PROJ:
© LIEBHERR WERK EHINGENforbidden.to third parties without express authority is strictlytion contained therein. Reproduction, use or disclosureWe reserve all rights in this document and in the informa-
© LIEBHERR WERK EHINGENsind ohne unsere ausdrьckliche Zustimmung verboten.Bekanntgabe an Dritte oder Verwertung seines Inhaltesstand behalten wir uns alle Rechte vor. Vervielfдltigung,Fьr dieses Dokument und den darin dargestellten Gegen-
PROJ:
© LIEBHERR WERK EHINGENforbidden.to third parties without express authority is strictlytion contained therein. Reproduction, use or disclosureWe reserve all rights in this document and in the informa-
© LIEBHERR WERK EHINGENsind ohne unsere ausdrьckliche Zustimmung verboten.Bekanntgabe an Dritte oder Verwertung seines Inhaltesstand behalten wir uns alle Rechte vor. Vervielfдltigung,Fьr dieses Dokument und den darin dargestellten Gegen-
PROJ:
Input Modul 3
Input Modul 1
Output Modul 2
Output Modul 1
© LIEBHERR WERK EHINGENforbidden.to third parties without express authority is strictlytion contained therein. Reproduction, use or disclosureWe reserve all rights in this document and in the informa-
© LIEBHERR WERK EHINGENsind ohne unsere ausdrьckliche Zustimmung verboten.Bekanntgabe an Dritte oder Verwertung seines Inhaltesstand behalten wir uns alle Rechte vor. Vervielfдltigung,Fьr dieses Dokument und den darin dargestellten Gegen-
PROJ:
Input Modul 3
Input Modul 1
Output Modul 2
Output Modul 1
© LIEBHERR WERK EHINGENforbidden.to third parties without express authority is strictlytion contained therein. Reproduction, use or disclosureWe reserve all rights in this document and in the informa-
© LIEBHERR WERK EHINGENsind ohne unsere ausdrьckliche Zustimmung verboten.Bekanntgabe an Dritte oder Verwertung seines Inhaltesstand behalten wir uns alle Rechte vor. Vervielfдltigung,Fьr dieses Dokument und den darin dargestellten Gegen-
PROJ:
© LIEBHERR WERK EHINGENforbidden.to third parties without express authority is strictlytion contained therein. Reproduction, use or disclosureWe reserve all rights in this document and in the informa-
© LIEBHERR WERK EHINGENsind ohne unsere ausdrьckliche Zustimmung verboten.Bekanntgabe an Dritte oder Verwertung seines Inhaltesstand behalten wir uns alle Rechte vor. Vervielfдltigung,Fьr dieses Dokument und den darin dargestellten Gegen-
PROJ:
© LIEBHERR WERK EHINGENforbidden.to third parties without express authority is strictlytion contained therein. Reproduction, use or disclosureWe reserve all rights in this document and in the informa-
© LIEBHERR WERK EHINGENsind ohne unsere ausdrьckliche Zustimmung verboten.Bekanntgabe an Dritte oder Verwertung seines Inhaltesstand behalten wir uns alle Rechte vor. Vervielfдltigung,Fьr dieses Dokument und den darin dargestellten Gegen-
PROJ:
© LIEBHERR WERK EHINGENforbidden.to third parties without express authority is strictlytion contained therein. Reproduction, use or disclosureWe reserve all rights in this document and in the informa-
© LIEBHERR WERK EHINGENsind ohne unsere ausdrьckliche Zustimmung verboten.Bekanntgabe an Dritte oder Verwertung seines Inhaltesstand behalten wir uns alle Rechte vor. Vervielfдltigung,Fьr dieses Dokument und den darin dargestellten Gegen-
PROJ:
© LIEBHERR WERK EHINGENforbidden.to third parties without express authority is strictlytion contained therein. Reproduction, use or disclosureWe reserve all rights in this document and in the informa-
© LIEBHERR WERK EHINGENsind ohne unsere ausdrьckliche Zustimmung verboten.Bekanntgabe an Dritte oder Verwertung seines Inhaltesstand behalten wir uns alle Rechte vor. Vervielfдltigung,Fьr dieses Dokument und den darin dargestellten Gegen-
PROJ:
© LIEBHERR WERK EHINGENforbidden.to third parties without express authority is strictlytion contained therein. Reproduction, use or disclosureWe reserve all rights in this document and in the informa-
© LIEBHERR WERK EHINGENsind ohne unsere ausdrьckliche Zustimmung verboten.Bekanntgabe an Dritte oder Verwertung seines Inhaltesstand behalten wir uns alle Rechte vor. Vervielfдltigung,Fьr dieses Dokument und den darin dargestellten Gegen-
PROJ:
Input Modul 3
Input Modul 1
Output Modul 2
Output Modul 1
© LIEBHERR WERK EHINGENforbidden.to third parties without express authority is strictlytion contained therein. Reproduction, use or disclosureWe reserve all rights in this document and in the informa-
© LIEBHERR WERK EHINGENsind ohne unsere ausdrьckliche Zustimmung verboten.Bekanntgabe an Dritte oder Verwertung seines Inhaltesstand behalten wir uns alle Rechte vor. Vervielfдltigung,Fьr dieses Dokument und den darin dargestellten Gegen-
PROJ:
130.00
© C IM-Tea mforbidden .to third parties w itho ut expre ss auth ority is strictlytion contained there in. Reproduction, use or disclosureWe reserve all rights in this documen t and in the info rma -
© C IM-Tea msin d ohne u nse re au sd rьckliche Zu stimmun g ve rbote n.Bekanntg abe an D ritte oder Verwertu ng sein es In haltesstand beh alte n wir un s alle Re chte vor. Vervielfд ltigung ,Fь r dieses Dokumen t u nd den d arin dargestellte n Ge gen-
PROJEKT: 2222228920980
1
8
9
1
1
1
3
3
VERLEGERICHTUNG
VERLEGERICHTUNG
1
/
VERLEGERICHTUNG
/
/
/ /
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
C-cod.
Дnderung auf 400
B40 wird ncht mehr benцtigt!
© C IM-Tea mforbidden .to third parties w itho ut expre ss auth ority is strictlytion contained there in. Reproduction, use or disclosureWe reserve all rights in this documen t and in the info rma -
© C IM-Tea msin d ohne u nse re au sd rьckliche Zu stimmun g ve rbote n.Bekanntg abe an D ritte oder Verwertu ng sein es In haltesstand beh alte n wir un s alle Re chte vor. Vervielfд ltigung ,Fь r dieses Dokumen t u nd den d arin dargestellte n Ge gen-
PROJEKT: 2222228920980
=K+K/1.Q23X
/ / / / / / /
/
/
/
/
/
////
VERLEGERICHTUNG
VERLEGERICHTUNG VERLEGERICHTUNG VERLEGERICHTUNG VERLEGERICHTUNG
VERLEGERICHTUNG
VERLEGERICHTUNG
VERLEGERICHTUNG
VERLEGERICHTUNG
VERLEGERICHTUNG
VERLEGERICHTUNGVERLEGERICHTUNGVERLEGERICHTUNG
VERLEGERICHTUNG
VERLEGERICHTUNG
VERLEGERICHTUNG
VERLEGERICHTUNG
/
/
/
/
/
/
A4.X40 A4.X41 A4.X42
A4.X49A4.X50A4.X51
A4.X58
A4.X55
Kabelbinder
© LIEBHERR WERK EHINGENforbidden.to third parties without express authority is strictlytion contained therein. Reproduction, use or disclosureWe reserve all rights in this document and in the informa-
© LIEBHERR WERK EHINGENsind ohne unsere ausdrьckliche Zustimmung verboten.Bekanntgabe an Dritte oder Verwertung seines Inhaltesstand behalten wir uns alle Rechte vor. Vervielfдltigung,Fьr dieses Dokument und den darin dargestellten Gegen-
PROJ:
© LIEBHERR WERK EHINGENforbidden.to third parties without express authority is strictlytion contained therein. Reproduction, use or disclosureWe reserve all rights in this document and in the informa-
© LIEBHERR WERK EHINGENsind ohne unsere ausdrьckliche Zustimmung verboten.Bekanntgabe an Dritte oder Verwertung seines Inhaltesstand behalten wir uns alle Rechte vor. Vervielfдltigung,Fьr dieses Dokument und den darin dargestellten Gegen-
PROJ:
© LIEBHERR WERK EHINGENforbidden.to third parties without express authority is strictlytion contained therein. Reproduction, use or disclosureWe reserve all rights in this document and in the informa-
© LIEBHERR WERK EHINGENsind ohne unsere ausdrьckliche Zustimmung verboten.Bekanntgabe an Dritte oder Verwertung seines Inhaltesstand behalten wir uns alle Rechte vor. Vervielfдltigung,Fьr dieses Dokument und den darin dargestellten Gegen-
PROJ:
© LIEBHERR WERK EHINGENforbidden.to third parties without express authority is strictlytion contained therein. Reproduction, use or disclosureWe reserve all rights in this document and in the informa-
© LIEBHERR WERK EHINGENsind ohne unsere ausdrьckliche Zustimmung verboten.Bekanntgabe an Dritte oder Verwertung seines Inhaltesstand behalten wir uns alle Rechte vor. Vervielfдltigung,Fьr dieses Dokument und den darin dargestellten Gegen-
PROJ:
© LIEBHERR WERK EHINGENforbidden.to third parties without express authority is strictlytion contained therein. Reproduction, use or disclosureWe reserve all rights in this document and in the informa-
© LIEBHERR WERK EHINGENsind ohne unsere ausdrьckliche Zustimmung verboten.Bekanntgabe an Dritte oder Verwertung seines Inhaltesstand behalten wir uns alle Rechte vor. Vervielfдltigung,Fьr dieses Dokument und den darin dargestellten Gegen-
PROJ:
© LIEBHERR WERK EHINGENforbidden.to third parties without express authority is strictlytion contained therein. Reproduction, use or disclosureWe reserve all rights in this document and in the informa-
© LIEBHERR WERK EHINGENsind ohne unsere ausdrьckliche Zustimmung verboten.Bekanntgabe an Dritte oder Verwertung seines Inhaltesstand behalten wir uns alle Rechte vor. Vervielfдltigung,Fьr dieses Dokument und den darin dargestellten Gegen-
PROJ:
© LIEBHERR WERK EHINGENforbidden.to third parties without express authority is strictlytion contained therein. Reproduction, use or disclosureWe reserve all rights in this document and in the informa-
© LIEBHERR WERK EHINGENsind ohne unsere ausdrьckliche Zustimmung verboten.Bekanntgabe an Dritte oder Verwertung seines Inhaltesstand behalten wir uns alle Rechte vor. Vervielfдltigung,Fьr dieses Dokument und den darin dargestellten Gegen-
PROJ:
© C IM-Tea mforbidden .to third parties w itho ut expre ss auth ority is strictlytion contained there in. Reproduction, use or disclosureWe reserve all rights in this documen t and in the info rma -
© C IM-Tea msin d ohne u nse re au sd rьckliche Zu stimmun g ve rbote n.Bekanntg abe an D ritte oder Verwertu ng sein es In haltesstand beh alte n wir un s alle Re chte vor. Vervielfд ltigung ,Fь r dieses Dokumen t u nd den d arin dargestellte n Ge gen-
PROJEKT: 99999998920980
Lдnge 03.03.06
/
/ /
/ /
2
2
Lдnge 03.03.06
/
© LIEBHERR WERK EHINGENforbidden.to third parties without express authority is strictlytion contained therein. Reproduction, use or disclosureWe reserve all rights in this document and in the informa-
© LIEBHERR WERK EHINGENsind ohne unsere ausdrьckliche Zustimmung verboten.Bekanntgabe an Dritte oder Verwertung seines Inhaltesstand behalten wir uns alle Rechte vor. Vervielfдltigung,Fьr dieses Dokument und den darin dargestellten Gegen-
PROJ:
© CIM-Teamforbidden.to third parties without express authority is strictlytion contained therein. Reproduction, use or disclosureWe reserve all rights in this document and in the informa-
© CIM-Teamsind ohne unsere ausdrьckliche Zustimmung verboten.Bekanntgabe an Dritte oder Verwertung seines Inhaltesstand behalten wir uns alle Rechte vor. Vervielfдltigung,Fьr dieses Dokument und den darin dargestellten Gegen-
Projekt: 8920980 9999999
© LIEBHERR WERK EHINGENforbidden.to third parties without express authority is strictlytion contained therein. Reproduction, use or disclosureWe reserve all rights in this document and in the informa-
© LIEBHERR WERK EHINGENsind ohne unsere ausdrьckliche Zustimmung verboten.Bekanntgabe an Dritte oder Verwertung seines Inhaltesstand behalten wir uns alle Rechte vor. Vervielfдltigung,Fьr dieses Dokument und den darin dargestellten Gegen-
PROJ:
© C IM-Tea mforbidden .to third parties w itho ut expre ss auth ority is strictlytion contained there in. Reproduction, use or disclosureWe reserve all rights in this documen t and in the info rma -
© C IM-Tea msin d ohne u nse re au sd rьckliche Zu stimmun g ve rbote n.Bekanntg abe an D ritte oder Verwertu ng sein es In haltesstand beh alte n wir un s alle Re chte vor. Vervielfд ltigung ,Fь r dieses Dokumen t u nd den d arin dargestellte n Ge gen-
PROJEKT: 99999998920980
////////
Aussentemp.Sensor entfдllt
© C IM-Tea mforbidden .to third parties w itho ut expre ss auth ority is strictlytion contained there in. Reproduction, use or disclosureWe reserve all rights in this documen t and in the info rma -
© C IM-Tea msin d ohne u nse re au sd rьckliche Zu stimmun g ve rbote n.Bekanntg abe an D ritte oder Verwertu ng sein es In haltesstand beh alte n wir un s alle Re chte vor. Vervielfд ltigung ,Fь r dieses Dokumen t u nd den d arin dargestellte n Ge gen-
PROJEKT: 2222228920980
Bei allen drei Stecker ist ein Gegenstecker zu Montieren
© C IM-Tea mforbidden .to third parties w itho ut expre ss auth ority is strictlytion contained there in. Reproduction, use or disclosureWe reserve all rights in this documen t and in the info rma -
© C IM-Tea msin d ohne u nse re au sd rьckliche Zu stimmun g ve rbote n.Bekanntg abe an D ritte oder Verwertu ng sein es In haltesstand beh alte n wir un s alle Re chte vor. Vervielfд ltigung ,Fь r dieses Dokumen t u nd den d arin dargestellte n Ge gen-
PROJEKT: 99999998920980
12
© CIM-Teamforbidden.to third parties without express authority is strictlytion contained therein. Reproduction, use or disclosureWe reserve all rights in this document and in the informa-
© CIM-Teamsind ohne unsere ausdrьckliche Zustimmung verboten.Bekanntgabe an Dritte oder Verwertung seines Inhaltesstand behalten wir uns alle Rechte vor. Vervielfдltigung,Fьr dieses Dokument und den darin dargestellten Gegen-
Projekt: 8920980 9999999
Gegenstecker
Gegenstecker
© LIEBHERR WERK EHINGENforbidden.to third parties without express authority is strictlytion contained therein. Reproduction, use or disclosureWe reserve all rights in this document and in the informa-
© LIEBHERR WERK EHINGENsind ohne unsere ausdrьckliche Zustimmung verboten.Bekanntgabe an Dritte oder Verwertung seines Inhaltesstand behalten wir uns alle Rechte vor. Vervielfдltigung,Fьr dieses Dokument und den darin dargestellten Gegen-
PROJ:
© LIEBHERR WERK EHINGENforbidden.to third parties without express authority is strictlytion contained therein. Reproduction, use or disclosureWe reserve all rights in this document and in the informa-
© LIEBHERR WERK EHINGENsind ohne unsere ausdrьckliche Zustimmung verboten.Bekanntgabe an Dritte oder Verwertung seines Inhaltesstand behalten wir uns alle Rechte vor. Vervielfдltigung,Fьr dieses Dokument und den darin dargestellten Gegen-
PROJ:
© LIEBHERR WERK EHINGENforbidden.to third parties without express authority is strictlytion contained therein. Reproduction, use or disclosureWe reserve all rights in this document and in the informa-
© LIEBHERR WERK EHINGENsind ohne unsere ausdrьckliche Zustimmung verboten.Bekanntgabe an Dritte oder Verwertung seines Inhaltesstand behalten wir uns alle Rechte vor. Vervielfдltigung,Fьr dieses Dokument und den darin dargestellten Gegen-
PROJ:
© LIEBHERR WERK EHINGENforbidden.to third parties without express authority is strictlytion contained therein. Reproduction, use or disclosureWe reserve all rights in this document and in the informa-
© LIEBHERR WERK EHINGENsind ohne unsere ausdrьckliche Zustimmung verboten.Bekanntgabe an Dritte oder Verwertung seines Inhaltesstand behalten wir uns alle Rechte vor. Vervielfдltigung,Fьr dieses Dokument und den darin dargestellten Gegen-
PROJ:
© LIEBHERR WERK EHINGENforbidden.to third parties without express authority is strictlytion contained therein. Reproduction, use or disclosureWe reserve all rights in this document and in the informa-
© LIEBHERR WERK EHINGENsind ohne unsere ausdrьckliche Zustimmung verboten.Bekanntgabe an Dritte oder Verwertung seines Inhaltesstand behalten wir uns alle Rechte vor. Vervielfдltigung,Fьr dieses Dokument und den darin dargestellten Gegen-
PROJ:
© LIEBHERR WERK EHINGENforbidden.to third parties without express authority is strictlytion contained therein. Reproduction, use or disclosureWe reserve all rights in this document and in the informa-
© LIEBHERR WERK EHINGENsind ohne unsere ausdrьckliche Zustimmung verboten.Bekanntgabe an Dritte oder Verwertung seines Inhaltesstand behalten wir uns alle Rechte vor. Vervielfдltigung,Fьr dieses Dokument und den darin dargestellten Gegen-
PROJ:
© CIM-Teamforbidden.to third parties without express authority is strictlytion contained therein. Reproduction, use or disclosureWe reserve all rights in this document and in the informa-
© CIM-Teamsind ohne unsere ausdrьckliche Zustimmung verboten.Bekanntgabe an Dritte oder Verwertung seines Inhaltesstand behalten wir uns alle Rechte vor. Vervielfдltigung,Fьr dieses Dokument und den darin dargestellten Gegen-
Projekt: 8920980 9999999
1
© LIEBHERR WERK EHINGENforbidden.to third parties without express authority is strictlytion contained therein. Reproduction, use or disclosureWe reserve all rights in this document and in the informa-
© LIEBHERR WERK EHINGENsind ohne unsere ausdrьckliche Zustimmung verboten.Bekanntgabe an Dritte oder Verwertung seines Inhaltesstand behalten wir uns alle Rechte vor. Vervielfдltigung,Fьr dieses Dokument und den darin dargestellten Gegen-
PROJ:
© CIM-Teamforbidden.to third parties without express authority is strictlytion contained therein. Reproduction, use or disclosureWe reserve all rights in this document and in the informa-
© CIM-Teamsind ohne unsere ausdrьckliche Zustimmung verboten.Bekanntgabe an Dritte oder Verwertung seines Inhaltesstand behalten wir uns alle Rechte vor. Vervielfдltigung,Fьr dieses Dokument und den darin dargestellten Gegen-
Projekt: 8920980 9999999
© C IM-Tea mforbidden .to third parties w itho ut expre ss auth ority is strictlytion contained there in. Reproduction, use or disclosureWe reserve all rights in this documen t and in the info rma -
© C IM-Tea msin d ohne u nse re au sd rьckliche Zu stimmun g ve rbote n.Bekanntg abe an D ritte oder Verwertu ng sein es In haltesstand beh alte n wir un s alle Re chte vor. Vervielfд ltigung ,Fь r dieses Dokumen t u nd den d arin dargestellte n Ge gen-
PROJEKT: 99999998920980
////////////
9
7
© LIEBHERR WERK EHINGENforbidden.to third parties without express authority is strictlytion contained therein. Reproduction, use or disclosureWe reserve all rights in this document and in the informa-
© LIEBHERR WERK EHINGENsind ohne unsere ausdrьckliche Zustimmung verboten.Bekanntgabe an Dritte oder Verwertung seines Inhaltesstand behalten wir uns alle Rechte vor. Vervielfдltigung,Fьr dieses Dokument und den darin dargestellten Gegen-
PROJ:
© LIEBHERR WERK EHINGENforbidden.to third parties without express authority is strictlytion contained therein. Reproduction, use or disclosureWe reserve all rights in this document and in the informa-
© LIEBHERR WERK EHINGENsind ohne unsere ausdrьckliche Zustimmung verboten.Bekanntgabe an Dritte oder Verwertung seines Inhaltesstand behalten wir uns alle Rechte vor. Vervielfдltigung,Fьr dieses Dokument und den darin dargestellten Gegen-
PROJ:
© LIEBHERR WERK EHINGENforbidden.to third parties without express authority is strictlytion contained therein. Reproduction, use or disclosureWe reserve all rights in this document and in the informa-
© LIEBHERR WERK EHINGENsind ohne unsere ausdrьckliche Zustimmung verboten.Bekanntgabe an Dritte oder Verwertung seines Inhaltesstand behalten wir uns alle Rechte vor. Vervielfдltigung,Fьr dieses Dokument und den darin dargestellten Gegen-
PROJ:
© LIEBHERR WERK EHINGENforbidden.to third parties without express authority is strictlytion contained therein. Reproduction, use or disclosureWe reserve all rights in this document and in the informa-
© LIEBHERR WERK EHINGENsind ohne unsere ausdrьckliche Zustimmung verboten.Bekanntgabe an Dritte oder Verwertung seines Inhaltesstand behalten wir uns alle Rechte vor. Vervielfдltigung,Fьr dieses Dokument und den darin dargestellten Gegen-
PROJ:
© CIM-Teamforbidden.to third parties without express authority is strictlytion contained therein. Reproduction, use or disclosureWe reserve all rights in this document and in the informa-
© CIM-Teamsind ohne unsere ausdrьckliche Zustimmung verboten.Bekanntgabe an Dritte oder Verwertung seines Inhaltesstand behalten wir uns alle Rechte vor. Vervielfдltigung,Fьr dieses Dokument und den darin dargestellten Gegen-
Projekt: 8920980 9999999
© LIEBHERR WERK EHINGENforbidden.to third parties without express authority is strictlytion contained therein. Reproduction, use or disclosureWe reserve all rights in this document and in the informa-
© LIEBHERR WERK EHINGENsind ohne unsere ausdrьckliche Zustimmung verboten.Bekanntgabe an Dritte oder Verwertung seines Inhaltesstand behalten wir uns alle Rechte vor. Vervielfдltigung,Fьr dieses Dokument und den darin dargestellten Gegen-
PROJ:
© LIEBHERR WERK EHINGENforbidden.to third parties without express authority is strictlytion contained therein. Reproduction, use or disclosureWe reserve all rights in this document and in the informa-
© LIEBHERR WERK EHINGENsind ohne unsere ausdrьckliche Zustimmung verboten.Bekanntgabe an Dritte oder Verwertung seines Inhaltesstand behalten wir uns alle Rechte vor. Vervielfдltigung,Fьr dieses Dokument und den darin dargestellten Gegen-
PROJ:
© LIEBHERR WERK EHINGENforbidden.to third parties without express authority is strictlytion contained therein. Reproduction, use or disclosureWe reserve all rights in this document and in the informa-
© LIEBHERR WERK EHINGENsind ohne unsere ausdrьckliche Zustimmung verboten.Bekanntgabe an Dritte oder Verwertung seines Inhaltesstand behalten wir uns alle Rechte vor. Vervielfдltigung,Fьr dieses Dokument und den darin dargestellten Gegen-
PROJ:
© LIEBHERR WERK EHINGENforbidden.to third parties without express authority is strictlytion contained therein. Reproduction, use or disclosureWe reserve all rights in this document and in the informa-
© LIEBHERR WERK EHINGENsind ohne unsere ausdrьckliche Zustimmung verboten.Bekanntgabe an Dritte oder Verwertung seines Inhaltesstand behalten wir uns alle Rechte vor. Vervielfдltigung,Fьr dieses Dokument und den darin dargestellten Gegen-
PROJ:
© LIEBHERR WERK EHINGENforbidden.to third parties without express authority is strictlytion contained therein. Reproduction, use or disclosureWe reserve all rights in this document and in the informa-
© LIEBHERR WERK EHINGENsind ohne unsere ausdrьckliche Zustimmung verboten.Bekanntgabe an Dritte oder Verwertung seines Inhaltesstand behalten wir uns alle Rechte vor. Vervielfдltigung,Fьr dieses Dokument und den darin dargestellten Gegen-
PROJ:
© LIEBHERR WERK EHINGENforbidden.to third parties without express authority is strictlytion contained therein. Reproduction, use or disclosureWe reserve all rights in this document and in the informa-
© LIEBHERR WERK EHINGENsind ohne unsere ausdrьckliche Zustimmung verboten.Bekanntgabe an Dritte oder Verwertung seines Inhaltesstand behalten wir uns alle Rechte vor. Vervielfдltigung,Fьr dieses Dokument und den darin dargestellten Gegen-
PROJ:
© LIEBHERR WERK EHINGENforbidden.to third parties without express authority is strictlytion contained therein. Reproduction, use or disclosureWe reserve all rights in this document and in the informa-
© LIEBHERR WERK EHINGENsind ohne unsere ausdrьckliche Zustimmung verboten.Bekanntgabe an Dritte oder Verwertung seines Inhaltesstand behalten wir uns alle Rechte vor. Vervielfдltigung,Fьr dieses Dokument und den darin dargestellten Gegen-
PROJ:
© LIEBHERR WERK EHINGENforbidden.to third parties without express authority is strictlytion contained therein. Reproduction, use or disclosureWe reserve all rights in this document and in the informa-
© LIEBHERR WERK EHINGENsind ohne unsere ausdrьckliche Zustimmung verboten.Bekanntgabe an Dritte oder Verwertung seines Inhaltesstand behalten wir uns alle Rechte vor. Vervielfдltigung,Fьr dieses Dokument und den darin dargestellten Gegen-
PROJ:
© LIEBHERR WERK EHINGENforbidden.to third parties without express authority is strictlytion contained therein. Reproduction, use or disclosureWe reserve all rights in this document and in the informa-
© LIEBHERR WERK EHINGENsind ohne unsere ausdrьckliche Zustimmung verboten.Bekanntgabe an Dritte oder Verwertung seines Inhaltesstand behalten wir uns alle Rechte vor. Vervielfдltigung,Fьr dieses Dokument und den darin dargestellten Gegen-
PROJ:
© LIEBHERR WERK EHINGENforbidden.to third parties without express authority is strictlytion contained therein. Reproduction, use or disclosureWe reserve all rights in this document and in the informa-
© LIEBHERR WERK EHINGENsind ohne unsere ausdrьckliche Zustimmung verboten.Bekanntgabe an Dritte oder Verwertung seines Inhaltesstand behalten wir uns alle Rechte vor. Vervielfдltigung,Fьr dieses Dokument und den darin dargestellten Gegen-
PROJ:
© LIEBHERR WERK EHINGENforbidden.to third parties without express authority is strictlytion contained therein. Reproduction, use or disclosureWe reserve all rights in this document and in the informa-
© LIEBHERR WERK EHINGENsind ohne unsere ausdrьckliche Zustimmung verboten.Bekanntgabe an Dritte oder Verwertung seines Inhaltesstand behalten wir uns alle Rechte vor. Vervielfдltigung,Fьr dieses Dokument und den darin dargestellten Gegen-
PROJ:
© CIM-Teamforbidden.to third parties without express authority is strictlytion contained therein. Reproduction, use or disclosureWe reserve all rights in this document and in the informa-
© CIM-Teamsind ohne unsere ausdrьckliche Zustimmung verboten.Bekanntgabe an Dritte oder Verwertung seines Inhaltesstand behalten wir uns alle Rechte vor. Vervielfдltigung,Fьr dieses Dokument und den darin dargestellten Gegen-
Projekt: 8920980 9999999
2000mm
© LIEBHERR WERK EHINGENforbidden.to third parties without express authority is strictlytion contained therein. Reproduction, use or disclosureWe reserve all rights in this document and in the informa-
© LIEBHERR WERK EHINGENsind ohne unsere ausdrьckliche Zustimmung verboten.Bekanntgabe an Dritte oder Verwertung seines Inhaltesstand behalten wir uns alle Rechte vor. Vervielfдltigung,Fьr dieses Dokument und den darin dargestellten Gegen-
PROJ:
© CIM-Teamforbidden.to third parties without express authority is strictlytion contained therein. Reproduction, use or disclosureWe reserve all rights in this document and in the informa-
© CIM-Teamsind ohne unsere ausdrьckliche Zustimmung verboten.Bekanntgabe an Dritte oder Verwertung seines Inhaltesstand behalten wir uns alle Rechte vor. Vervielfдltigung,Fьr dieses Dokument und den darin dargestellten Gegen-
Projekt: 8920980 9999999
© LIEBHERR WERK EHINGENforbidden.to third parties without express authority is strictlytion contained therein. Reproduction, use or disclosureWe reserve all rights in this document and in the informa-
© LIEBHERR WERK EHINGENsind ohne unsere ausdrьckliche Zustimmung verboten.Bekanntgabe an Dritte oder Verwertung seines Inhaltesstand behalten wir uns alle Rechte vor. Vervielfдltigung,Fьr dieses Dokument und den darin dargestellten Gegen-
PROJ:
© CIM-Teamforbidden.to third parties without express authority is strictlytion contained therein. Reproduction, use or disclosureWe reserve all rights in this document and in the informa-
© CIM-Teamsind ohne unsere ausdrьckliche Zustimmung verboten.Bekanntgabe an Dritte oder Verwertung seines Inhaltesstand behalten wir uns alle Rechte vor. Vervielfдl tigung,Fьr dieses Dokument und den darin dargestellten Gegen-
Projekt: 8920980 9999999
200mm
© LIEBHERR WERK EHINGENforbidden.to third parties without express authority is strictlytion contained therein. Reproduction, use or disclosureWe reserve all rights in this document and in the informa-
© LIEBHERR WERK EHINGENsind ohne unsere ausdrьckliche Zustimmung verboten.Bekanntgabe an Dritte oder Verwertung seines Inhaltesstand behalten wir uns alle Rechte vor. Vervielfдltigung,Fьr dieses Dokument und den darin dargestellten Gegen-
PROJ:
© LIEBHERR WERK EHINGENforbidden.to third parties without express authority is strictlytion contained therein. Reproduction, use or disclosureWe reserve all rights in this document and in the informa-
© LIEBHERR WERK EHINGENsind ohne unsere ausdrьckliche Zustimmung verboten.Bekanntgabe an Dritte oder Verwertung seines Inhaltesstand behalten wir uns alle Rechte vor. Vervielfдltigung,Fьr dieses Dokument und den darin dargestellten Gegen-
PROJ:
© LIEBHERR WERK EHINGENforbidden.to third parties without express authority is strictlytion contained therein. Reproduction, use or disclosureWe reserve all rights in this document and in the informa-
© LIEBHERR WERK EHINGENsind ohne unsere ausdrьckliche Zustimmung verboten.Bekanntgabe an Dritte oder Verwertung seines Inhaltesstand behalten wir uns alle Rechte vor. Vervielfдltigung,Fьr dieses Dokument und den darin dargestellten Gegen-
PROJ:
© LIEBHERR WERK EHINGENforbidden.to third parties without express authority is strictlytion contained therein. Reproduction, use or disclosureWe reserve all rights in this document and in the informa-
© LIEBHERR WERK EHINGENsind ohne unsere ausdrьckliche Zustimmung verboten.Bekanntgabe an Dritte oder Verwertung seines Inhaltesstand behalten wir uns alle Rechte vor. Vervielfдltigung,Fьr dieses Dokument und den darin dargestellten Gegen-
PROJ:
© LIEBHERR WERK EHINGENforbidden.to third parties without express authority is strictlytion contained therein. Reproduction, use or disclosureWe reserve all rights in this document and in the informa-
© LIEBHERR WERK EHINGENsind ohne unsere ausdrьckliche Zustimmung verboten.Bekanntgabe an Dritte oder Verwertung seines Inhaltesstand behalten wir uns alle Rechte vor. Vervielfдltigung,Fьr dieses Dokument und den darin dargestellten Gegen-
PROJ:
© LIEBHERR WERK EHINGENforbidden.to third parties without express authority is strictlytion contained therein. Reproduction, use or disclosureWe reserve all rights in this document and in the informa-
© LIEBHERR WERK EHINGENsind ohne unsere ausdrьckliche Zustimmung verboten.Bekanntgabe an Dritte oder Verwertung seines Inhaltesstand behalten wir uns alle Rechte vor. Vervielfдltigung,Fьr dieses Dokument und den darin dargestellten Gegen-
PROJ:
© LIEBHERR WERK EHINGENforbidden.to third parties without express authority is strictlytion contained therein. Reproduction, use or disclosureWe reserve all rights in this document and in the informa-
© LIEBHERR WERK EHINGENsind ohne unsere ausdrьckliche Zustimmung verboten.Bekanntgabe an Dritte oder Verwertung seines Inhaltesstand behalten wir uns alle Rechte vor. Vervielfдltigung,Fьr dieses Dokument und den darin dargestellten Gegen-
PROJ:
© LIEBHERR WERK EHINGENforbidden.to third parties without express authority is strictlytion contained therein. Reproduction, use or disclosureWe reserve all rights in this document and in the informa-
© LIEBHERR WERK EHINGENsind ohne unsere ausdrьckliche Zustimmung verboten.Bekanntgabe an Dritte oder Verwertung seines Inhaltesstand behalten wir uns alle Rechte vor. Vervielfдltigung,Fьr dieses Dokument und den darin dargestellten Gegen-
PROJ:
Wie MassestьtzpunktLWE ausfьhren!
Wie MassestьtzpunktLWE ausfьhren!
© LIEBHERR WERK EHINGENforbidden.to third parties without express authority is strictlytion contained therein. Reproduction, use or disclosureWe reserve all rights in this document and in the informa-
© LIEBHERR WERK EHINGENsind ohne unsere ausdrьckliche Zustimmung verboten.Bekanntgabe an Dritte oder Verwertung seines Inhaltesstand behalten wir uns alle Rechte vor. Vervielfдltigung,Fьr dieses Dokument und den darin dargestellten Gegen-
PROJ:
© CIM-Teamforbidden.to third parties without express authority is strictlytion contained therein. Reproduction, use or disclosureWe reserve all rights in this document and in the informa-
© CIM-Teamsind ohne unsere ausdrьckliche Zustimmung verboten.Bekanntgabe an Dritte oder Verwertung seines Inhaltesstand behalten wir uns alle Rechte vor. Vervielfдltigung,Fьr dieses Dokument und den darin dargestellten Gegen-
Projekt: 8920980 9999999
/
/
© LIEBHERR WERK EHINGENforbidden.to third parties without express authority is strictlytion contained therein. Reproduction, use or disclosureWe reserve all rights in this document and in the informa-
© LIEBHERR WERK EHINGENsind ohne unsere ausdrьckliche Zustimmung verboten.Bekanntgabe an Dritte oder Verwertung seines Inhaltesstand behalten wir uns alle Rechte vor. Vervielfдltigung,Fьr dieses Dokument und den darin dargestellten Gegen-
PROJ:
© LIEBHERR WERK EHINGENforbidden.to third parties without express authority is strictlytion contained therein. Reproduction, use or disclosureWe reserve all rights in this document and in the informa-
© LIEBHERR WERK EHINGENsind ohne unsere ausdrьckliche Zustimmung verboten.Bekanntgabe an Dritte oder Verwertung seines Inhaltesstand behalten wir uns alle Rechte vor. Vervielfдltigung,Fьr dieses Dokument und den darin dargestellten Gegen-
PROJ:
© LIEBHERR WERK EHINGENforbidden.to third parties without express authority is strictlytion contained therein. Reproduction, use or disclosureWe reserve all rights in this document and in the informa-
© LIEBHERR WERK EHINGENsind ohne unsere ausdrьckliche Zustimmung verboten.Bekanntgabe an Dritte oder Verwertung seines Inhaltesstand behalten wir uns alle Rechte vor. Vervielfдltigung,Fьr dieses Dokument und den darin dargestellten Gegen-
PROJ:
© LIEBHERR WERK EHINGENforbidden.to third parties without express authority is strictlytion contained therein. Reproduction, use or disclosureWe reserve all rights in this document and in the informa-
© LIEBHERR WERK EHINGENsind ohne unsere ausdrьckliche Zustimmung verboten.Bekanntgabe an Dritte oder Verwertung seines Inhaltesstand behalten wir uns alle Rechte vor. Vervielfдltigung,Fьr dieses Dokument und den darin dargestellten Gegen-
PROJ:
© LIEBHERR WERK EHINGENforbidden.to third parties without express authority is strictlytion contained therein. Reproduction, use or disclosureWe reserve all rights in this document and in the informa-
© LIEBHERR WERK EHINGENsind ohne unsere ausdrьckliche Zustimmung verboten.Bekanntgabe an Dritte oder Verwertung seines Inhaltesstand behalten wir uns alle Rechte vor. Vervielfдltigung,Fьr dieses Dokument und den darin dargestellten Gegen-
PROJ:
© CIM-Teamforbidden.to third parties without express authority is strictlytion contained therein. Reproduction, use or disclosureWe reserve all rights in this document and in the informa-
© CIM-Teamsind ohne unsere ausdrьckliche Zustimmung verboten.Bekanntgabe an Dritte oder Verwertung seines Inhaltesstand behalten wir uns alle Rechte vor. Vervielfдltigung,Fьr dieses Dokument und den darin dargestellten Gegen-
Projekt: 8920980 9999999
6 4 2
5 3 1
8
7
12
11
14
13
10
9
© LIEBHERR WERK EHINGENforbidden.to third parties without express authority is strictlytion contained therein. Reproduction, use or disclosureWe reserve all rights in this document and in the informa-
© LIEBHERR WERK EHINGENsind ohne unsere ausdrьckliche Zustimmung verboten.Bekanntgabe an Dritte oder Verwertung seines Inhaltesstand behalten wir uns alle Rechte vor. Vervielfдltigung,Fьr dieses Dokument und den darin dargestellten Gegen-
PROJ:
© LIEBHERR WERK EHINGENforbidden.to third parties without express authority is strictlytion contained therein. Reproduction, use or disclosureWe reserve all rights in this document and in the informa-
© LIEBHERR WERK EHINGENsind ohne unsere ausdrьckliche Zustimmung verboten.Bekanntgabe an Dritte oder Verwertung seines Inhaltesstand behalten wir uns alle Rechte vor. Vervielfдltigung,Fьr dieses Dokument und den darin dargestellten Gegen-
PROJ:
© LIEBHERR WERK EHINGENforbidden.to third parties without express authority is strictlytion contained therein. Reproduction, use or disclosureWe reserve all rights in this document and in the informa-
© LIEBHERR WERK EHINGENsind ohne unsere ausdrьckliche Zustimmung verboten.Bekanntgabe an Dritte oder Verwertung seines Inhaltesstand behalten wir uns alle Rechte vor. Vervielfдltigung,Fьr dieses Dokument und den darin dargestellten Gegen-
PROJ:
ca.25
© CIM-Teamforbidden.to third parties without express authority is strictlytion contained therein. Reproduction, use or disclosureWe reserve all rights in this document and in the informa-
© CIM-Teamsind ohne unsere ausdrьckliche Zustimmung verboten.Bekanntgabe an Dritte oder Verwertung seines Inhaltesstand behalten wir uns alle Rechte vor. Vervielfдl tigung,Fьr dieses Dokument und den darin dargestellten Gegen-
Projekt: 8920980 9999999
4,75mm
4,75mm
4,75mm
4,75mm
40.26
50.57
60.00
50.00
42.00
© CIM-Teamforbidden.to third parties without express authority is strictlytion contained therein. Reproduction, use or disclosureWe reserve all rights in this document and in the informa-
© CIM-Teamsind ohne unsere ausdrьckliche Zustimmung verboten.Bekanntgabe an Dritte oder Verwertung seines Inhaltesstand behalten wir uns alle Rechte vor. Vervielfдltigung,Fьr dieses Dokument und den darin dargestellten Gegen-
Projekt: 8920980 9999999
230.00
230.00
25.00
11.00
11.00
25.00
11.00
11.00
25.00
© CIM-Teamforbidden.to third parties without express authority is strictlytion contained therein. Reproduction, use or disclosureWe reserve all rights in this document and in the informa-
© CIM-Teamsind ohne unsere ausdrьckliche Zustimmung verboten.Bekanntgabe an Dritte oder Verwertung seines Inhaltesstand behalten wir uns alle Rechte vor. Vervielfдltigung,Fьr dieses Dokument und den darin dargestellten Gegen-
Projekt: 8920980 9999999
197.00
185.00
30.0030.00 167.00
227.00
21.00
����������� ������ ������
�������������� ��������
��� ��������� ��� ������
����� �������� � ���
� ��� ����� � � ��� � ������� ��� ��������� � ����!
" #� ���� � ��$��� ������ � ��� ��������� � ����% �� ��� ����� &��
��� ������ �����!
���� ���� ����'
( ��� ��������� ����� ��� )��� ������� )���� ������� ��� ����!
( *� ����� ������% ����� ������� ��� �����% ���� ��� ������+� �����
����� � ���� ��� )��� �&����� ��!
� ��� ,����� � ����������
#� � ���� �$� ���� � ��� )� �����������!
" -&��� �� ��� ������+� ��������� � ���� )���� &���� � �$� �� �
�����!
" *� ����� ������% ���� �� ��� )����� ��� �&���!
��� � ���
. #� � ���� � ������ ��� �����'
� �� ��� ���� �����!
. /��$� ��� �$�� � ��� ���� )0�� �!
���� ����
� *��� *��
1 *��� *���
2 *��� *�2
� *��� *��
� *��� *��
3 *��� )0 �$�� 4���$��5
6������� ����������
� � ��
���������� � ������ ������
����������������������
� �� �� � ��� ����������� ����� ������
*�� �� 7 8�9��� &����� � ���� /��� ���� � ����� �� �������
*��� � 7 #��! ������ ������ /��� ���� � ����� �� �������
*�2 3� 7 :����& /��� ���� � ����� �� �������
*�� ��� 7 ��� ���� /��� ���� � ����� �� �������
*�� 1�� 7 6������� ������� �� /��� ���� � ����� �� �������
���� �� �� ������ ��������
. ;�� ��� ��)�� �)$� � ����� ��� ������$� ����!
. ���� �� ��� ������$� ���� ��� �� ���� � &�� � ��& �� &�� ���
���� �����!
� ���� � ��� �� !� "��# �$ � �� %�"$
��� ���
� *��� )0
1 <$��
2 -���&
6������� ����������
� � �&
����������� ������ ������
�������������� ��������
��� ����� )��� ��� ��� ���� �� &��� �� ��� ����� ����� ��� ������
)���� ��� ��$��+� ����!
����� ��� ���� �����
� �� �� � ��� ����������� ����� ������
*� �� 7 - ��� � ��� ���� )0
*1 �!� 7 ���� ��� )��� ( ## (
*2 �!� 7 /��� ��� )��� ( ## (
*� �!� 7 ���� �& )��� ( ## (
*� �!� 7 /��� �& )��� ( ## (
*3 2 7 ���� ���� ����� ����� ���� ( ## (
*� 2 7 /��� ���� ����� ����� ���� ( ## (
*��) �� 7 8�9��� &����� ����� ( ## (
*� �� 7 #����� ��������% ���% �������� ������ 4=��5 ( ## (
*�� �� 7 -��� �� ����� 4 ����5% ���� ������ 4 �
����5
( ## (
*� �� 7 �8 ����� ��$�� )����% �� ������� � ����%
���� �� )���
( ## (
*�� � 7 ,� �� ��� ( ## (
*�� �� 7 :������� �&����� >21% >1�% >2! >2� ( ## (
*�1 1� 7 - ��� ( ## (
*�2 1� 7 - ��� ( ## (
*�� 2� 7 -� �� ����� ��&����� � ���� ( ## (
*�� �� 7 �8 ����� ��$�� ? 4��&���5 � @ � / 4��$����5
�0����� A2! ������� ,B
( ## (
*�3 �� 7 ������� �� 4�7=# ����5 ( ## (
6������� ����������
� � �'
���������� � ������ ������
����������������������
� �� �� � ��� ����������� ����� ������
*�� �� 7 ������� �� 4�7=# ����5 ( ## (
*�� �� 7 >���� ����% ���� &�������� & �� ��� &�����
��
( ## (
*�� �� 7 8�����% �� ������� � ����% ������� �� ( ## (
*��7 1� 7 8�����% �� ������� � ����% ������� 2� ( ## (
*1� �� 7 *��� &������� & ���&����� �� % ��� ( ## (
*1� �� 7 �& )���% ��� )��� ( ## (*11 �!� 7 -&��� ������ ( ## (
*12 �� 7 - ��� ( ## (
*1� �� 7 #���� �@% ����� 6<; ( ## (
*1� �� 7 *������ )���� ( ## (
*13 �� 7 ,������ ��� ( ## (
*1� �� 7 :���� ����% ����� ���� ( ## (
*1� �� 7 - ��� ( ## (
*1� 1� 7 #���� ����� ��� ����� ( ## (
*2� �� 7 ?�� $����� ��$�����% ���% �1 ? ����� ( ## (
*2�� �� 7 *��� ���� &���� ������� ( ## (
*2�) �� 7 *��� ���� &���� ������� ( ## (
*21� �� 7 ���� &���� �������% ���� ����� ( ## (
*21) �� 7 /��� &���� �������% ���� ����� ( ## (
*22� �� 7 ���� &���� �������% ���� ��) �� 4 ����5 ( ## (
*22) �� 7 /��� &���� �������% ���� ��) �� 4 ����5 ( ## (
*2� 1� 7 /�������� �� 4 ����5 ( ## (
*2� �� 7 ?�� ������ ������� 2� ( ## (
*23 �� 7 7��!>� �8�6<;�;:�</ ( ## (
7��!>1 �8�6<;�;:�</ 4�7=# ����5 ������� 2�
*2� �� 7 /����$� 4�7=# ����5 ������� 2� ( ## (
*2� � 7 �8�6<;�;:�</ ?�� <������� ( ## (
*2� �� 7 <���% ��0��� ������ ( ## (
*�� 1� 7 ?�� ��0��� ������ ������� 2� ( ## (
*�� 1� 7 - ��� ( ## (
*�1 1� 7 - ��� ( ## (
*�2 � 7 ��� #� �� �B1% ��� #� �� �B1 ( ## (
*�� �� 7 #� �� ����� � ?�� ( ## (
*�� �� 7 #� �� ����� 1 ?�� ( ## (
*�3 �� 7 #� �� ����� 2 ?�� ( ## (
*�� �� 7 ��� �� ����� � ( >��� � C��% C��% C�% C�� ( ## (
*�� �� 7 ��� �� ����� � ( >��� 1 C��% C�2! 8��% C�� ( ## (
*�� �� 7 - ��� ( ## (
*�� �� 7 - ��� ( ## (
*�� �� 7 ��� �� ����� � ( ,� � �� �� ����� 1 ( C��!
C�1
( ## (
*�1 �� 7 ��� �� ����� � ( ,� � �� �� ����� 1 ( C1�%
C2�% C��! C�1
( ## (
*�2 �� 7 ��� �� ����� � ( ,� 2 C31 ������� ��)�����
� ����
( ## (
*�� � 7 ������� �� ������ ( ## (*�� �� 7 ��� �� ����� 1 ( >��� � C�3! C�2! C��! C��� ( ## (
*�3 �� 7 ��� �� ����� 1 ( >��� 1 D�����% C��% C1�%
C1�
( ## (
*�� �� 7 - ��� ( ## (
*�� �� 7 - ��� ( ## (
*�� �� 7 ��� �� ����� 1 ( ,� � �� �� ����� � (
C6:�! C6:1% C1% C2
( ## (
*3� �� 7 ��� �� ����� 1 ( ,� 1 �� �� ����� � ( ���!
C3!�!1!2
( ## (
*3� �� 7 ��� �� ����� 1 ( ,� 2 6�! 6� ��$����� ���� ( ## (
*31 �� 7 ��� �� ����� 1 ( ,� � >�3 )����� ����� ( ## (
6������� ����������
� � �(
����������� ������ ������
�������������� ��������
� �� �� � ��� ����������� ����� ������
*32 �� 7 ��� �� ����� 2 ?�� >��� � ( ## (
*3� �� 7 ��� �� ����� 2 ?�� >��� 1 ( ## (
*3� �� 7 ��� �� ����� 2 ?�� >��� 2 ( ## (
*33 �� 7 ��� �� ����� 2 ?�� >��� � ( ## (
*3� �� 7 ��� �� ����� 2 ?�� ,� � ( ## (
*3� �� 7 ��� �� ����� 2 ?�� ,� 1 ( ## (
*3� �� 7 ��� �� ����� 2 ?�� ,� 2 ( ## (*�� �� 7 ��� �� ����� 2 ?�� ,� � ( ## (
*�� �� 7 ?�� �� )���� ������� �� ( ## (
*�1 2� 7 - ��� ( ## (
*�2 �� 7 - ��� ( ## (
*�� �� 7 /��� &��& ������% ���� ������ 4 ����5 ( ## (
*�� �� 7 /�� ������� ��% �1 ? ����� ( ## (
*�3 �� 7 /�� ������� 2� ( ## (
���� �� �� �������� ��
. /��$� ��� �$�� �!
. ;�� ��� ��)�� �)$� � ����� ��� ������$� ����!
. ���� �� ��� ������$� ���� ��� �� ���� � &�� � ��& �� &�� ���
���� �����!
��� �� ��" �!��)��� !� �� ���� � ���
����� � �� �6, ��0� � �$�� ����� ����!
��� �6,� ��& � ��& ���� ��� ���� � ����� ����� ��� �6, ����!
"���$ "� ��" �!��)��� !� �� ���� � ���
��� ���&�� �6, ���� � ��)��'
( E�� ��� ���� �**'
7�� ����� ����� 4������� 2�5 ��� ������!
( E�� ��� ���� �**'
7�� ����� ����� 4������� �� ������� 2� ��� ������� ��5 ��� ������!
( E�� ��� ���� �@ ��� � ������ �&����� �'
7�� ����� ����� �������� ) ��� ����� ���� ������ ��� ������!
� >���� �6, ����
1 *��� 4�0�� ��5
2 �6, 4�0�� ��5
. E�� ��� ���� �@ ��� � ������ �&����� �'
��� )���� �6, ���� � ������ ��� ����4�5 ������ � �&����� �!
#� ��� ���� � �����% ��� ����� ���� �6, ����� � !
6������� ����������
� � ��
����������� ��������
� ����������
����� ��� ����� ��������
� � ����� � ���� �� ����� ��� �� ��� ������������� ������ ������ !����
���" �� �� ����� � ����������� �� ��� ���������� � ���#
$�� ��� ������� �� ��� ����� � ���� �� �� ���� %#
� $��� & ����� ��������� �� ����� ���� �� ������ & ����� ���� ��#
����� ��� ������� ������ ��� ����������
� ' ���� � � ����� �� �� ��� � �( �� ��������� ���� ���� �� ���!����� ��
��� � �����#
���������� ��������� ���� �� ��������� ����� �� �� �������
������ ���� �� � ���� �������
� ������� �� ����� �� �� ���� ��� ������ ���������
� )������� ��� � ��� �� �� ��� ��� �������� ���� � ���� ���� �
�������� �� ��� ���� �� ������ !"#�$�� #� %�!�#
*������ ������ ���� ����� �� ��� �� �� ������ �� ��� � ��� �� ��� � ���#
+��� �� �� �� � ��� �, �� ���� �� ���� � ������ �� ��� � ����� ����
�� �� �� ���#
� -�!�� ������� �� &��( ��� &���� ��� � !� ��� ���� �� ���� ��
����������#
&�� .� ��� � ���� ��������� ��� � ��� �� ��� � ��� ����� ��� ���!��� ����
� ���� �� � ���� ������� ��� � ���/
0 1��� �� �.234255 16$+7825 $25�.12#
� ' (
8 ���������� 7��� ���� 8 �� �
�������������������
��( #��)�� !��� ��*��
��(�( #��)�� ���� ������ �� �� ������
+�� ������� ������ �������� � �� �� ��� � �����9� ���������#
.� �������� ��� ����� ��������: � ��� �������: �,���� � !��� �� �� ���������
����� �� ������ ���� ��#
.� �������: ��� ���������� ������������ ����(� ��� ����� � ��;����� ��
�������� ���� &��� ��� ������� �������#
������� ��
$��!��� ���� �" ����� � < $+7* ����� �
.� � ��� ������ &���� ��� �� ������� �� �� ���� ���� ��� � �����: �� ��
���&� �� ��� ����� � ���� �� ������ �� ��� ���!��� ���� ������ �� ���
� �� ����������� 8=$+25"#
�� ���� ���� �������
��� �����+�� ��� *� �,�� �� ������-
� +�� ���!��� ���� �� ���&� �� ��� ������� ����� � ( ��� �������
����� �"#
� =�� ���!��� ����� �� ������ �� ��� ���!��� ���� ������ �� ��� � ��
����������� 8=$+25"#
� =�� ���!��� ����� � � �� �� � ��� &��� ��� �.234255 �� ������
����& ��#
� +�� ���������� �� �� ���!��� ����� �� ����� ���� �� ������ ����#
$��!��� 1��� + ���
� ' .
8 ����������7��� ���� 8 �� �
����������� ��������
���������� ��� ��� ������
2!��� � ��������� � � ������� ������#
$�� ��� 2������ ������ �� ��� ���!��� ���� � ���#
)�������� �� ��� � ��� �� ��� � ���: ��������� ���!��� � � ����� �� ��������#
.� � ���������� ����� &���� � � ��������� � � �� ��� � �����/
� +�� � ����� �� ���� ��&�#
� -���� � �� !�� ��������� �� ���� ��� ��� �������� �� ��� � �����
�� ��� �� � ��#
� +��� �� ����� ��� �� ��� $+7* ����� � . �� ��� ����� � ����#
&�� -��� ��� ���!��� ����#
0 =���� �&������� ��� ��� ��������: ��� ��!��� ���� �� ��� ������� ����� �
��� ����� � ����" �� �������#
4 !� �.234255 16$+7825 $25�.12 ������� ��� � ���#
#��)��'!��� #����� !���� #�����
� ./// -� ��������� ������
��� ��������#
2�������� �������� ����/
*������� �&���� 3% �� ������
�!�� ������ ��� ������ �� ���
�������
1��� �� �.234255 16$+78�
25 $25�.12
� .//( -� ��������� ������
��� ��������#
2�������� �������� ����/
*������� �&���� 3% ���� ���
�&���� ���� ��� ������ �� ���
1��� �� �.234255 16$+78�
25 $25�.12
� .//. -� ��������� ������
��� ��������#
2�������� �������� ����/
+��� � ���� 3% ���������
������� ���� ����( ��������
�&���� ��� ��� �&����"
1��� �� �.234255 16$+78�
25 $25�.12
� .//0 -� ��������� ������
��� ��������#
2�������� �������� ����/
2�������� �������� ����
�������� �&���� ����( 3%
������ &������ ����(
1��� �� �.234255 16$+78�
25 $25�.12
� ./(0 +�� ������ �� ��� �� !�
�� ���� �� �������
+�� ���� ���� ��� 3�" � �
�!���� ��� �� ���� �� �
�� >1
1�� � ��� ������� ������: ����
� �� �.234255 16$+7825
$25�.12
� ./(1 $����� ����� 4�
���&�: ���� < ���� ���
& ����� ���� ����������� ����: �� !�� ���
������� � ���� �� ���
������
3� (� ������ ��� ��������/
�������� ��� ��&
1��� �� �.234255 16$+78�
25 $25�.12
� ./(2 =�� ����� �2)� �� ���
������� ���� �&����
����� ��: ����� � ������
� ���� ������ ����
��� &��(
1���� � ������ ���� ������/
2������� � � ��� � ������ � ���
�������" �� ��� �� ������ ����
� ���
1���( ��� �����������: ��� ��
������ ����� �� ������ ����
������: ���� �� �.234255
16$+7825 $25�.12
$��!��� 1��� + ���
� ' 0
8 ���������� 7��� ���� 8 �� �
�������������������
#��)��'!��� #����� !���� #�����
� ./(3 ?������ �������� < ��
��������" �� �� ����
! ���
?������ �������� < �� ������
���"/ $��� � � ������ ���� ���
���������� �� ��� ���! ����
1��� �� �.234255 16$+78�
25 $25�.12
� �//4 )���� � ���� =%"
���� ��� &��(
1=-/ )���� � ���� =%" ����
���: ����� � ���� =%" � ���
& �� �������!�: ����� �� 1=-
&�����
1��� �� �.234255 16$+78�
25 $25�.12
� �//1 =�� ������������ ����
��� &��(
1=-/ =�� ������������ ������
�������: �� ������������ � ���
& �� �������!�: ����� �� 1=-
&�����
1��� �� �.234255 16$+78�
25 $25�.12
� �//2 7����� ������ ������
���� ��� &��(
1=-/ 7����� ������ ������
�������: � ��& �� �������!�:
����� �� 1=- &�����
1��� �� �.234255 16$+78�
25 $25�.12
� �//3 7����� ����� ������
���� ��� &��(
1=-/ 7����� ����� ������
�������: � ��& �� �������!�:
����� �� 1=- &�����
1��� �� �.234255 16$+78�
25 $25�.12
� �/./ )������ �� ��� � ��� 1 ���� ���� ����� �������: �����
������ # ������ � � ���� �
������ � ����� ����
1��� �� �.234255 16$+78�
25 $25�.12
� �/.( )������ �� ��� � ��� 1 ���� ���� ����� �������: ����
��� ������ # ������ � � ����
� ������ � ����� ����
1��� �� �.234255 16$+78�
25 $25�.12
� �/.0 )������ �� ��� � ��� 1 ���� ���� �����: ������ �
(��� � ������ � � ���� �
������ � ����� ����
1��� �� �.234255 16$+78�
25 $25�.12
� �/.� )������ �� ��� � ��� 1 ���� ���� �����: � �� (��� �
=" ������ � � ���� � ���
���� � ����� ����
1��� �� �.234255 16$+78�
25 $25�.12
� �/.4 )������ �� ��� � ��� 1 ���� ���� �����: ����� � ����
=%" ������ � � ���� � ���
���� � ����� ����#
1��� �� �.234255 16$+78�
25 $25�.12
� �/.1 )������ �� ��� � ��� 1 ���� ���� �����: ������
������ < =�": ������ � �
���� � ������ � ����� ����
1��� �� �.234255 16$+78�
25 $25�.12
� �/.2 )������ �� ��� � ��� 1 ���� ���� �����: ������ ����
��� = ": ������ � � ����
� ������ � ����� ����
1��� �� �.234255 16$+78�
25 $25�.12
� �/.3 )������ �� ��� � ��� 1 ���� ���� �����: ����� ������
<: ������ � � ���� � ������ �
����� ����#
1��� �� �.234255 16$+78�
25 $25�.12
$��!��� 1��� + ���
� ' �
8 ����������7��� ���� 8 �� �
����������� ��������
#��)��'!��� #����� !���� #�����
� �/.5 )������ �� ��� � ��� 1 ���� ���� �����: ����� ������
# ������ � � ���� � ������ �
����� ����#
1��� �� �.234255 16$+78�
25 $25�.12
� �/.� )������ �� ��� � ��� 1 ���� ���� �����: = � � ����
���� ������ � � ���� � ������
� � ����� ����#
1��� �� �.234255 16$+78�
25 $25�.12
� 0/// $+7* ������ �����
4<� �� ����: �� �����
����� �������� �����
���� ! �� ���
2�������� �������� ����/
*������� �&���� 3% ����( �
������� �� � ���
1��� �� �.234255 16$+78�
25 $25�.12
� 0//( $+7* ������ ����� 4�
�� ����: �� ��������
�� �������� ��������
! �� ���
2�������� �������� ����/
*������� �&���� 3% � �������
�� � ���
1��� �� �.234255 16$+78�
25 $25�.12
� 0//. $����� ����� 4�
������ ��: ��������� ��
��� � �(��� �� (� � ��
��� �� ��������
3� (� ������ ��� ��������/
*������� �&���� 3� � �������
�� � ���
1��� �� �.234255 16$+78�
25 $25�.12
� 0//0 -� ��� � �������� ! ���
���
'�� � ��������/ *������� �&����
3%< � ������� �� � ���
1��� �� �.234255 16$+78�
25 $25�.12
� 0//� -� ������� ��������
! �� ���
.������ ���� ������/ 1� ����
�������� � � ��� �!���������
@<��="
1��� �� �.234255 16$+78�
25 $25�.12
� 0//4 -� ������� ��������
! �� ���
.������ ���� ������/ 1� ����
�������� � � ��� ������������
A��="
1��� �� �.234255 16$+78�
25 $25�.12
� 0//1 +� !�� ��������� � ��
��� �� ��������
1������ ��!�� $<: ���& ���
�� !�� ��������� ���� �/ 1� ����
������� �� � ���
1��� �� �.234255 16$+78�
25 $25�.12
� 0//2 +� !�� ��������� � ��
��� �� ��������
1������ ��!�� $<: ��!����
�� !�� ��������� ���� �/ 1� ����
������� �� � ���
1��� �� �.234255 16$+78�
25 $25�.12
� 0//3 -� ���� (��(���� ! ���
���
���� (��(����/ .������!� �&����
3 ������� �� � ���
1��� �� �.234255 16$+78�
25 $25�.12
� 0//5 -� ���(�� ����������
��� ! �� ���
3��(�� �������������/ .������!�
�&���� 3� ������� �� � ���
1��� �� �.234255 16$+78�
25 $25�.12
� 0//� ?� � ��� ������ �����
4�" ������ ��
?� � ���/ 7!���� ���: �!���
�� ���� �&���� 3� ������� ��
� ���
1�� � ��� ������: ���� ��
�.234255 16$+7825 $25�
�.12
$��!��� 1��� + ���
� ' 4
8 ���������� 7��� ���� 8 �� �
�������������������
#��)��'!��� #����� !���� #�����
� 0//� '��� ������� ��!�� ���
�������� � �������
������� ��!�� ����� ���
+ �( ������ 3<�/ 2������� �
� ��� �����!��� �� A�"
1��� �� �.234255 16$+78�
25 $25�.12
� 0//! '��� ������� ��!�� ���
�������� � �������
������� ��!�� ����� ���
+ �( ������ 3<�/ 2������� �
� ��� �!��!��� �� @��"
1��� �� �.234255 16$+78�
25 $25�.12
� 0//6 2����� � ���� ��
�� ����
$ �������� �&����/ $� �� ���� �
B. �� ������� �� � ���
1��� �� �.234255 16$+78�
25 $25�.12
� 0//� 2����� ����� � ����
�� �� ����: ���!���
��� ��������
? � ��� � ���� ������ 5�/
1� ���� # ������� ��� ���� �
��� ����� �� ��� ����� ������
@<��="
1��� �� �.234255 16$+78�
25 $25�.12
� 0//� 2����� ����� � ����
�� �� ����: ���!���
��� ��������
? � ��� � ���� ������ 5�/
1� ���� # ������� ��� ��& �
��� ����� �� ��� ����� ������
A��="
1��� �� �.234255 16$+78�
25 $25�.12
� 0/(/ $����� ����� 4<%
������ ��: ��������� � �
����� � ���� ���: ���!�
��� ���� �������� ��
��,�� �� � �� <
4��� ���� ���/ +����� ����
������ 3� ������� �� � ���
1��� �� �.234255 16$+78�
25 $25�.12
� 0/(( $����� ����� 4<%
������ ��: ��������� � �
����� � ���� ���: ���!���� ���� �������� ��
��,�� �� � �� <
4��� ���� ���/ +����� ����
������ 3� � ��� �������
1��� �� �.234255 16$+78�
25 $25�.12
� 0/(. 1�������� ���!��� ��
���� �������� �� ��,��
�� � <
� �� ��� ����� ������ �����
/ .������!� ������ 3< �������
�� � ���
1��� �� �.234255 16$+78�
25 $25�.12
� 0/(0 1�������� ���!��� ��
���� �������� �� ��,��
�� � <
� �� ��� ����� ������ �����
/ .������!� ������ 3< � ���
�������
1��� �� �.234255 16$+78�
25 $25�.12
� 0/(� -� ����� ����� � ����
��� �����" ! �� ���#
7����� �����/ .������!�
������ 3 ������� �� � ���
1��� �� �.234255 16$+78�
25 $25�.12
� 0/(4 -� ����� ����� � ����
��� �����" ! �� ���#
7����� �����/ .������!�
������ 3 � ��� �������
1��� �� �.234255 16$+78�
25 $25�.12
� 0/(1 -��� )��!��� �����/ C����� ������� ��
� ��� � ����� �� ��� ����� ����
���
1��� �� �.234255 16$+78�
25 $25�.12
$��!��� 1��� + ���
� ' 1
8 ����������7��� ���� 8 �� �
����������� ��������
#��)��'!��� #����� !���� #�����
� 0/(2 $����� ����� 4<
�� ����: ���� �� �
������ ��� ���������
�� �������
4��� �� �/ C����� ������� ��
� ��� � ����� �� ��� ����� ����
���
1��� �� �.234255 16$+78�
25 $25�.12
� 0/(3 $����� ����� 4�
������ ��: ����� ���
������ ��� ���������
�� �������
.���� ��� ���� �/ C����� �������
�� � ��� � ����� �� ��� �����
������
1��� �� �.234255 16$+78�
25 $25�.12
� 0/(5 �') ��� ! �� ��� 5��� �������/ *������� �&����
3<� ������� �� � ���
1��� �� �.234255 16$+78�
25 $25�.12
� 0/(� +� !�� ��������� � ��
��� �� ��������
1������ ��!�� $</ '��& ���
�� !�� ��������� ���� � �� ����
< ������� �� � ���
1��� �� �.234255 16$+78�
25 $25�.12
� 0/(� +� !�� ��������� � ��
��� �� ��������
1������ ��!�� $</ 5�!����
�� !�� ��������� ���� � �� ����
< ������� �� � ���
1��� �� �.234255 16$+78�
25 $25�.12
� 0/(! -� ������� ��������
! �� ���
.������ ���� ������ 5/
1� ���� < �������� � � ���
�!��������� @<��="
1��� �� �.234255 16$+78�
25 $25�.12
� 0/(6 -� ������� ��������
! �� ���
.������ ���� ������ 5/
1� ���� < �������� � � ��� ���
���������� A��="
1��� �� �.234255 16$+78�
25 $25�.12
� 0/(� 2����� ����� � ������ �� ����: ���!���
��� ��������
? � ��� � ���� ������ 5D/1� ���� < �������� � � ���
�!��������� @<��="
1��� �� �.234255 16$+78�25 $25�.12
� 0/(� 2����� ����� � ����
�� �� ����: ���!���
��� ��������
? � ��� � ���� ������ 5D/
1� ���� < �������� � � ��� ���
���������� A��="
1��� �� �.234255 16$+78�
25 $25�.12
� 0/./ B��(���&� ��������
��� ! �� ���
1������ ��!�� (��(���&� ������
$</ ������� �� � ���
1��� �� �.234255 16$+78�
25 $25�.12
� 0/.( 7����� < �������� ���
! �� ���
1������ ��!�� ������ < ������
$< / ������� �� � ���
1��� �� �.234255 16$+78�
25 $25�.12
� 0/.. 7����� % �������� ���
! �� ���
1������ ��!�� ������ % ������
$<�/ ������� �� � ���
1��� �� �.234255 16$+78�
25 $25�.12
� 0/.0 -� ������ & �����
���� ��: 4�� ������
� ���� �� ��������� ��
� �,���� � ��������
4�� ������/ .���� ������� ��
� ���
1��� �� �.234255 16$+78�
25 $25�.12
� 0/.� 1���� � ������ ����
������ ��� ! �� ���
1���� � ������ ���� ������ �����
��� ��!��/ .������!� �&���� 3��
������� �� � ���
1��� �� �.234255 16$+78�
25 $25�.12
$��!��� 1��� + ���
� ' 2
8 ���������� 7��� ���� 8 �� �
�������������������
#��)��'!��� #����� !���� #�����
� 0/.4 * ������ ������ � ����
�� ���������
* ������ ������/ .���� �������� �
� ��� ������� �� � ���"
1��� �� �.234255 16$+78�
25 $25�.12
� 0/.1 * ������ ������ � ����
�� ���������
* ������ ������ ����� < �������� �
� ��� ������� �� � ���"
1��� �� �.234255 16$+78�
25 $25�.12
� 0/.2 E������( �������� ���
! �� ���
E������( ��������/ ���� �����
���� � �������� � � ��� �!������
���� @<��="
1��� �� �.234255 16$+78�
25 $25�.12
� 0/.3 E������( �������� ���
! �� ���
E������( ��������/ ���� �����
���� � �������� � � ��� ������
������� A��="
1��� �� �.234255 16$+78�
25 $25�.12
� 0/.5 -� ���!��� ��������
! �� ���
� �� ��� ����� ������ �����
</ .������!� ������ 3< ������
�� �� � ���
1��� �� �.234255 16$+78�
25 $25�.12
� 0/.� -� ���!��� ��������
! �� ���
� �� ��� ����� ������ �����
</ .������!� ������ 3< � ���
�������
1��� �� �.234255 16$+78�
25 $25�.12
� 0/.� 1���� � ������ ����
������ ��� ! �� ���
1���� � ������ ���� �����/ .��
�����!� ������ 3�% ������� ��
� ���
1��� �� �.234255 16$+78�
25 $25�.12
� 0/.! 1���� � ������ ����
������ ��� ! �� ���
1���� � ������ ���� �����/ .��
�����!� ������ 3�% � ��� ����
����
1��� �� �.234255
16$+7825 $25�.12
� 0/.6 E������( �������� ���
! �� ���
E������( ��������/ 5���� �����
���� � �������� � � ��� �!������
���� @<��="
1��� �� �.234255 16$+78�
25 $25�.12
� 0/.� E������( �������� ���
! �� ���
E������( ��������/ 5���� �����
���� � �������� � � ��� ������
������� A��="
1��� �� �.234255 16$+78�
25 $25�.12
� 0/.� E������( �������� ���
! �� ���
E������( ��������/ *�������
�&���� ������� �� � ���
1��� �� �.234255 16$+78�
25 $25�.12
� 0/0/ E������( �������� ���
! �� ���
E������( ��������/ *�������
�&���� < ������� �� � ���
1��� �� �.234255 16$+78�
25 $25�.12
� 0/0( 3 �(�� ���� � �����
����� ��� �������� ���
! �� ���
2�������� ���/ .���� ���� �
������� �� � ���
1��� �� �.234255 16$+78�
25 $25�.12
� 0/0. 3 �(�� ���� � �����
����� ��� �������� ���
! �� ���
2�������� ���/ .���� ���� � <
������� �� � ���
1��� �� �.234255 16$+78�
25 $25�.12
� 0/00 3 �(�� ���� ��������
��� ! �� ���
3 �(�� ����/ .���� ���� �
������� �� � ���
1��� �� �.234255 16$+78�
25 $25�.12
$��!��� 1��� + ���
� ' 3
8 ����������7��� ���� 8 �� �
����������� ��������
#��)��'!��� #����� !���� #�����
� 0/0� 3 �(�� ���� ��������
��� ! �� ���
3 �(�� ����/ .���� ���� � <
������� �� � ���
1��� �� �.234255 16$+78�
25 $25�.12
� 0/04 E������( �������� ���
! �� ���
E������( ��������/ =���! ����
������ ������� �� � ���
1��� �� �.234255 16$+78�
25 $25�.12
� 0/01 E������( �������� ���
! �� ���
E������( ��������/ =�� ���� ���
�����!� �&���� ������� �� � ���
1��� �� �.234255 16$+78�
25 $25�.12
� �/// $����� ����� 4
�� ����: � �(��� �� (�
� ���� �� ���� ���:
���!��� ��� ��������
* �(��� �� (�/ 2������� � � ���
� ������ ����� �������"
1��� �� �.234255 16$+78�
25 $25�.12
� �//. C��(��� ���� �����
���(��� � ���� �� �����
��
C��(��� ���� ����� ���(���/
' ��� � ������ ����� �������"
1��� �� �.234255 16$+78�
25 $25�.12
� �//� -� ���(�� ����������
��� ! �� ���
3��(�� �������������/ ' ��� �
������ ����� �������"
1��� �� �.234255 16$+78�
25 $25�.12
� �//1 -� ���� (��(���� ! ���
���
���� (��(����/ ' ��� � ������
����� �������"
1��� �� �.234255 16$+78�
25 $25�.12
� �//3 -� ��� � �������� ! ���
���
'�� � ��������/ ' ��� � ������
����� �������"
1��� �� �.234255 16$+78�
25 $25�.12
� �//� ' � ���� ��� &��(
���� �����"
' �/ ' ��� � ������ ����� ����
����"
1��� �� �.234255 16$+78�
25 $25�.12
� �//� ' � ���� ��� &��(
���� �����"
' �/ ' ��� � ������ ����� ����
����"
1��� �� �.234255 16$+78�
25 $25�.12
� �//! ' � ���� ��� &��(
���� �����"
' �/ ' ��� � ������ � ��� ����
����"
1��� �� �.234255 16$+78�
25 $25�.12
� �//6 ' � ���� ��� &��(
���� �����"
' �/ ' ��� � ������ ��!� ����"
+�� �� ����� ������ �������
���� ��� � ��� ��� ������ ����
����
1��� �� �.234255 16$+78�
25 $25�.12
� �//� 3�FF�� � ���� ��
���! ���
3�FF��/ ' ��� � ������ �����
�������"
1��� �� �.234255 16$+78�
25 $25�.12
� �/(/ *������� �� ���,
� � ��: ��������
� � �� ������ ������
�����
$&�!�� ���� �����������/ 2����
���� � � ��� � ������ ����� ����
����"
1��� �� �.234255
16$+7825 $25�.12
� �/(. 5 ��� =<�% ���! ���:
(��(���&� ��� ������
���
�� �� � ��������/ ' ��� � ����
��� ����� �������"
1��� �� �.234255
16$+7825 $25�.12
$��!��� 1��� + ���
� ' 5
8 ���������� 7��� ���� 8 �� �
�������������������
#��)��'!��� #����� !���� #�����
� �/(� '�,�� �� � �� ���
� ��� �� ! �� ���
����� ������ �����
�� ��� �� &��� ����
�� ���!��� �!�������
<�� �� � ��������/ ' ��� �
������ ����� �������"
1��� �� �.234255 16$+78�
25 $25�.12
� �/(1 '�,�� �� � < �� ���
� ���
%�� �� � ��������/ ' ��� �
������ ����� �������"
1��� �� �.234255 16$+78�
25 $25�.12
� �/(3 1������� � � �� 8���� ���� ��������/ ' ��� �
������ ����� �������"
1��� �� �.234255 16$+78�
25 $25�.12
� �/(� '�,�� �� � < ��� ���:
(��(���&� ��� ������
���
� �� ��� ����� ������ �����
/ ' ��� � ������ ����� �������"
1��� �� �.234255 16$+78�
25 $25�.12
� �/(� '�,�� �� � < ��� ���:
(��(���&� ��� ������
���
� �� ��� ����� ������ �����
/ ' ��� � ������ ������������"
1��� �� �.234255 16$+78�
25 $25�.12
� �/(! '�,�� �� � < ��� ���:
(��(���&� ��� ������
���
� �� ��� ����� ������ �����
/ ' ��� � ������ � ��� �������"
1��� �� �.234255 16$+78�
25 $25�.12
� �/(6 '�,�� �� � < ��� ���:
(��(���&� ��� ������
���
� �� ��� ����� ������ �����
/ 2������� � � ��� � ������ ���
!� ����" +�� �� ����� ������
������� ���� ��� � ��� ���
������ �������
1��� �� �.234255 16$+78�
25 $25�.12
� �/(� '�,�� �� � �� ���
� ��� �� ! �� ���
����� ������ �����
�� ��� �� &��� ����
�� ���!��� �!�������
� �� ��� ����� ������ �����
</ ' ��� � ������ ����� �������"
1��� �� �.234255 16$+78�
25 $25�.12
� �/(� '�,�� �� � �� ���
� ��� �� ! �� ���
����� ������ �����
�� ��� �� &��� ����
�� ���!��� �!�������
� �� ��� ����� ������ �����
</ 2������� � � ��� � ������ ���
����������"
1��� �� �.234255 16$+78�
25 $25�.12
� �/./ '�,�� �� � ��
��� ��� �� ! �� ���
����� ������ �����
�� ��� �� &��� ����
�� ���!��� �!�������
� �� ��� ����� ������ �����
</ 2������� � � ��� � ������
� ��� �������"
1��� �� �.234255 16$+78�
25 $25�.12
� �/.( '�,�� �� � �� ���
� ��� �� ! �� ���
����� ������ �����
�� ��� �� &��� ����
�� ���!��� �!�������
� �� ��� ����� ������ �����
</ 2������� � � ��� � ������ ���
!� ����" +�� �� ����� ������
������� ���� ��� � ��� ���
������ �������
1��� �� �.234255 16$+78�
25 $25�.12
$��!��� 1��� + ���
� ' (/
8 ����������7��� ���� 8 �� �
����������� ��������
#��)��'!��� #����� !���� #�����
� �/.. 7��� ��!���� �� !��
��������
+� !�� ���� ���& �� ������
���� ! �!�/ 2������� � � ��� �
������ ����� �������"
1��� �� �.234255 16$+78�
25 $25�.12
� �/.� 7��� ���& �� �� !��
��������
+� !�� ���� ��!���� ������
���� ! �!�: �������� � � ��� �
������ ����� �������"
1��� �� �.234255 16$+78�
25 $25�.12
� �/.1 -� �� � ,�� �� (�
! �� ��� � �!�������
7!������� ����������/ ' ��� �
������ ����� �������"
1��� �� �.234255 16$+78�
25 $25�.12
� �/.3 G���( �� ��� ��!���
��� ! �� ���
G���(��� ��� ��!���/ ' ��� �
������ ����� �������"
1��� �� �.234255 16$+78�
25 $25�.12
� �/.� )��!��� �� ��� �������� *��������� � ! �!� �������
�������� �� !�� ���� / ' ���
� ������ ����� �������"
1��� �� �.234255 16$+78�
25 $25�.12
� �/.� )��!��� �� ��� �������� *��������� � ! �!� �������
�������� �� !�� ���� / ' ���
� ������ ������������"
1��� �� �.234255 16$+78�
25 $25�.12
� �/.! )��!��� �� ��� �������� *��������� � ! �!� �������
�������� �� !�� ���� / ' ���
� ������ � ��� �������"
1��� �� �.234255 16$+78�
25 $25�.12
� �/.6 )��!��� �� ��� �������� *��������� � ! �!� �������
�������� �� !�� ���� / ' ���
� ������ ��!� ����" +�� �� �
����� ������ ������� ���� ���� ��� ��� ������ �������
1��� �� �.234255 16$+78�
25 $25�.12
� �/.� )��!��� �� ��� �������� ���� ����" ���������� � ! �!�
������� �������� �� !�� ����
</ ' ��� � ������ ����� �������"
1��� �� �.234255 16$+78�
25 $25�.12
� �/.� )��!��� �� ��� �������� ���� ����" ���������� � ! �!�
������� �������� �� !�� ����
</ ' ��� � ������ ������������"
1��� �� �.234255 16$+78�
25 $25�.12
� �/0/ )��!��� �� ��� �������� ���� ����" ���������� � ! �!�
������� �������� �� !�� ����
</ ' ��� � ������ � ��� �������"
1��� �� �.234255 16$+78�
25 $25�.12
� �/0( )��!��� �� ��� �������� ���� ����" ���������� � ! �!�
������� �������� �� !�� ����
</ ' ��� � ������ ��!� ����"
+�� �� ����� ������ �������
���� ��� � ��� ��� ������ ����
����
1��� �� �.234255 16$+78�
25 $25�.12
� �/0. -� ���������
��������
2�������� �������� ����/
' ��� � ������ ����� �������"
1��� �� �.234255 16$+78�
25 $25�.12
$��!��� 1��� + ���
� ' ((
8 ���������� 7��� ���� 8 �� �
�������������������
#��)��'!��� #����� !���� #�����
� �/0� -� � � ��!��� � ! ���
���
' � ��!��� �/ ' ��� � ������
����� �������"
1��� �� �.234255 16$+78�
25 $25�.12
� �/01 -� ���� ������� ! ���
���
5��� �������/ ' ��� � ������
����� �������"
1��� �� �.234255 16$+78�
25 $25�.12
� �/03 -� ���� �������: ��� �
�������� �������� ! ���
���
5��� ������� � ��� � ��������/
' ��� � ������ ����� �������"
1��� �� �.234255 16$+78�
25 $25�.12
� �/0� 7��� ��!���� �� !��
��������
���� ����" �� !�� ���������
! �!� �� !�� ���� < ���& ���/
' ��� � ������ ����� �������"
1��� �� �.234255 16$+78�
25 $25�.12
� �/0! 7��� ���& �� �� !��
��������
���� ����" �� !�� ���������
! �!� �� !�� ���� < ��!����:
� ��� � ������ ����� �������"
1��� �� �.234255 16$+78�
25 $25�.12
� �/0� =������� � �;�������
� ���� �� ���! ���
=������� � �;������� / ' ���
� ������ ����� �������"
1��� �� �.234255 16$+78�
25 $25�.12
� �/�/ =������� � �;�������
< � ���� �� ���! ���
=������� � �;������� </ ' ���
� ������ ����� �������"
1��� �� �.234255 16$+78�
25 $25�.12
� �/�. -� H������( ��������
! �� ���
E������( ��������: ����/ ' ��� �
������ ����� �������"
1��� �� �.234255 16$+78�
25 $25�.12
� �/�� -� H������( ��������
! �� ���
E������( ��������: �����/ ' ���
� ������ ����� �������"
1��� �� �.234255 16$+78�
25 $25�.12
� �/�1 -� <�� ��������
?������ ��������"
! �� ���
?������ ��������/ ' ��� � ����
��� ����� �������"
1��� �� �.234255 16$+78�
25 $25�.12
� �/�3 E������( �������� ���
! �� ���
<# E������( �������� ���(��� <
�� ���! ���/ ' ��� � ������
����� �������"
1��� �� �.234255 16$+78�
25 $25�.12
� �/�� +� !�� ���� < ���
! �� ���
<# +� !�� ���� < ���(��� <
�� ���! ���/ ' ��� � ������
����� �������"
1��� �� �.234255 16$+78�
25 $25�.12
� �/�! 1���� � ������ ����
������ ���� ��� &��(
1���� � ������ ���� ������ ���
���/ ' ��� � ������ ����� ����
����"
1��� �� �.234255
16$+7825 $25�.12
� �/�� '� ����� � �(���
� �� ���� ��� &��(
'� ����� � �(��� � ��/ ' ���
� ������ ����� �������"
1��� �� �.234255 16$+78�
25 $25�.12
� �/4/ +� !�� ���� ���
! �� ���
<# )� ���! ���� �� �� �� !��
���� / ' ��� � ������ �����
�������"
1��� �� �.234255 16$+78�
25 $25�.12
$��!��� 1��� + ���
� ' (.
8 ����������7��� ���� 8 �� �
����������� ��������
#��)��'!��� #����� !���� #�����
� �/4. ?� ���, ��� ! �� ��� <# ?� ���, ���(���/ ' ��� �
������ ����� �������"
1��� �� �.234255 16$+78�
25 $25�.12
� �/4� 5�!������ ����� ����
��� &��(
5�!������ ����� 2# 2�/ ' ���
� ������ ����� �������"
1��� �� �.234255 16$+78�
25 $25�.12
� �/41 3 �(��� � �� ����
��� &��(
3 �(��� � �� 3D/ ' ��� �
������ ����� �������"
1��� �� �.234255 16$+78�
25 $25�.12
� 4/.� )��!��� ���� ��������
�� �� �� �
.��� ������ ���� � �� 3 ������
����� ������: ������ �����
���� ��� ���������� ��
���������� ����� ����������
���� �� �� �� �"
1��� �� �.234255 16$+78�
25 $25�.12
� 4/.� -� (��(���&� ��������
! �� ���
B��(���&� ������ �� �������
������ �� � � ����# ��
H ����" ���� ������� ��
������� ������ �� � < �������
�� H ����" �� ���� � ���� �
����
1���( (��(���&� ������: ����
� �� �.234255 16$+7825
$25�.12
� 4/.! -� ������� ��������
! �� ���
.������ ���� ������ ����&
��I: ���� ��� � ����� ����
���� �� � ��I ��� ������ �� �
< ������� ���� ��� � �����"
1�� � ��� ���� ��� � �� �� � ��
��!�� ��������
� 4/.0 2����� ���� ��� � (�
�� ����
? � ��� � ���� ������ 5�/
3 � ��� ��� ����� �� ��� ����
������ &��� � � �����
1��� �� �.234255 16$+78�
25 $25�.12
� 4/.� .������ �������� ���
! �� ���
.��� ��� � ���� ������ 5/
3 � ��� ��� ����� �� ��� ����
������ &��� � � �����
1��� �� �.234255 16$+78�
25 $25�.12
� 4/.4 1�������� ���� ��@
���!��� �� ��� ��������:
�� ������� ��� �� (�
������
� �� ��� ����� ������ �����
������� � � ��� ��� ����� ��
��� ��������� &��� � � �����
1��� �� �.234255 16$+78�
25 $25�.12
� 4/.1 2����� ����� � ����
�� �� ����: ���!���
��� ��������
2���� �� ���� ������ 5� � �
��� �: ! ���� �� ������ ��
������ < ������
1��� �� �.234255 16$+78�
25 $25�.12
� 4/.2 -� ������� ��������
! �� ���
2���� �� ���� ������ 5 ����
��� �: ! ���� �� ������ ��
������ < ������
1��� �� �.234255 16$+78�
25 $25�.12
� 4/.3 ������ ��� ����� ��
<� (��� : ���!��� ����
�������� �� �� �� <��
�� �
?� � ��� ������ �&���� 3�
� � ���������: �� � ������ �
���� ��!� <� >1 : ��� ��!��
��� ����: ������ ���� �&����
�������!�
1�� � ������� ������: ����(
��� ��!��: ���� �� �.234255
16$+7825 $25�.12
$��!��� 1��� + ���
� ' (0
8 ���������� 7��� ���� 8 �� �
�������������������
#��)��'!��� #����� !���� #�����
� 4/.5 -��� 5� � ,�� �� (� �����/ �� �
,�� �� (� ���! ��� ��� ������
�� � % ������� � ���� �� ���
���� �� � DI ��������������
1��� �� �.234255 16$+78�
25 $25�.12
� 4/0� 2����� � � �� 2����� ��� �������� ��� ��&/
' ��� �� �������� ������ 3�
�� ��� &�����
1���( ������ ��� ��!��: ���� ��
�.234255 16$+7825 $25�
�.12
� 4/04 +� !�� ��������� ������
���� � ���� �� ��� ���
��������
�4 ������� ��!�� $</ .�! ���
�&������� ���������
1��� �� �.234255 16$+78�
25 $25�.12
� 1/(. 2�������� ������&�
��������# 2����� � ��
��� �� �� ����
+�� ��������� ������&� � �
�� ��������� �� ��� �����&���
���!��� �����/ 2 ���1: 2
���): 2 ���2: 2 ���'
1��� �� �.234255 16$+78�
25 $25�.12
� 1/(2 )������ �� ��� � ��� 1 ���� ���� �����: ������ ���
���� ������ � � ���� �
������ � ����� ����# +��� ��
���&� �� ��� ����� � ���� ���
��� � �� ��� ������ ���!���
����#
1��� �� �.234255 16$+78�
25 $25�.12
��(�. %�*�� ��� ���*�� +����� ������
+�� �����&��� � ��� ���� ��� ��� & ����� ���� �� &���� � !� � ������� �
������ ���� �� &���� �� ���� ����� ��� !��� ���: ���� &��� ����� � ����
�� ��������#
����� ��� ���� ������� ���*�� +����� ������-
� 1��������� ����
� .����! � ���� ������ ���� �����&�� �� � ������ � ���"
� .����! � ���� < ������ ���� �����&�� �� % ������ � ���"
� $����� ������ ����
$��!��� 1��� + ���
� ' (�
8 ����������7��� ���� 8 �� �
����������� ��������
����� ����� !���� �����
$��!��� ���� 2 D�: ���� �� ����
��� ���� ������ ����� 4%" �� ����
1��� �� ������ ���� ��!� �� >1
3��"
1�� � ��� ������� ������
�� $+7* ������ ����� ������ ��: 1���( ��� � � �����
1��������� & ����� ��FF�� 2���� �� ��� ������� �� �������� � ������ 1���( ��� ������ ���� ������
3��
1��� �� ��� ������ ���� ���
�&��� 3�� �� 3<# .� ��� ������� ���� � 3< �� ��� ��&: ����(
��� ������ ������ �������� �
$��!��� ���� 2 D�: ���� �� ����
��� ���� ������ ����� 4%"
1��� �� ��!�� ��� ��& 3�" 1���( ��� ���� �� ��!��
�� $+7* ������ ����� ����� ��: ����
������� & ����� ��FF��
' ��� �� ��� �������� � ������ 1���( ��� ���� �� ��!��
�� �������� 3�
$��!��� ���� 2 <�% 4��� ���� ��� ������ ���� ��!� �� >1
3�"
1�� � ��� ������� ������
4��� ���� ��� �!���� ���� ������
����� 4<%" ������ ��
1���( ��� � � �����
C ����� ��FF�� &��� �����! � ���� ' ��� �� ��� ������� � ���� ���� � �����
���� � ������
1���( ��� ������ ���� ������
3�
+��� ��;�����/ � 1���( ��� &�����
������ ���� �����&�� �� � ����
���� � ���
1���( ��� &��(��� ���� �����
�������� ������ ! �!�� �������
! �!� ����("
+�� ������ �� ��� �� !�� ���� ��
�������
1���( ��� �� !�� ���� ����� �����
���� ������ ! �!�� ! �� ��� ��
H������� ����"
C ����� ��FF�� &��� �����! � ���� 1��� �� ������ ���� ��!� � >1
3<"
1�� � ��� ������� ������
+��� ��;�����/ ������ ���� 1���( ��� � � �����
�����&�� �� � ������� � ��� ' ��� �� ��� �������� � ������ 1���( ��� ������ ���� ������
3<
+�� ������ �� ��� �� !�� ���� ��
�������
� 1���( ��� &�����
$��!��� ���� 2 <��< 2�������� �������� ���� ����( ���
������������ ��������� 3% "
1���( ��� ��������� ��������
����
2�������� �������� ����( ������
����� 4<�" ������ ��
2���� �� ��� �������� � � ���� ���� ������ 1���( ��� �������� �&���� 3%
� 1���( ��� &�����
1���( ��� ��������� ��������
���� ��������
$��!��� ���� 2 <�� 2�������� �������� �������� ���! ���
��� �� � ����� �� �������� ���� 3%"
1���( ��� �������� ����
2�������� �������� ������ �����
4�" ������ ��: & ����� ��FF�� &���
����� �� ����
2���� �� ��� �������� � � ���� ���� ������ 1���( ��� �������� �&���� 3%
$��� ������ ����� 4%D" ������ ��:
�� !�� ��������� � ���
1���( ��� �������� ���� �� ��
��� ��������$��!��� ���� 2 D� 2����� ��� �������� ��� ��& ������ ��
��������� �� ������ 216"
1���( ��� ��� ��!��
2����� ��� �������� ������ �����
4�" �� ����
2���� �� ��� ������ ������ ������ ���� ���
������
1���( ��� �������� ������ ! �!�
$��� ������ ����� 4%D" ������ �� ' ��� �� ��� �������� � ������ 1���( ��� �������� �&���� 3�
=���� � ������� ������� � & �����
��FF��
� 1���( ��� &�����
$��!��� 1��� + ���
� ' (4
8 ���������� 7��� ���� 8 �� �
�������������������
����� ����� !���� �����
$��!��� ���� 2 ��<� ?� ���, ��� ������ ���� ��!� <�
>1 3�"
1�� � ��� �� � ��� ������
?� � ��� �!���� ���� ������ �����
4�" ������ ��
7�� ��!�� ��� ���� 1������ ��� ��� ��!��
)��!��� ���� �������� �� �� �� <��
�� �
' ��� �� ��� �������� � ������ 1���( ��� ������ �&���� 3�
1���( ��� &����� �� ��� �� ������������ =<
$��!��� ���� 2 <�D 3� (� ������ ��� �������� ��� ��&
3�"
$� �� ��� ������/ ��� �� (� ����
��� ���� �� ������ &���� ��� ���
���� ����
=������ ��� �������� ������ �����
4�" ������ ��
2���� �� ��� �������� � � ���� ���� ������ 1���( ��� �������� �&���� 3�
-� �� !�� ��������� � � �� ��������: � 1���( ��� &�����
���� < ������� ������� � & �����
��FF��
1���( ��� ������ ��� �� ���
! �!�
1���( ��� �� � ����
$��!��� ���� 2 D� +��� ������ '�� ��& ������
3 ����� �� ��� ������ ����� 4D"
������ ��
)������!� ����� ��� � $��!��� ��� ����� ���
+�� � �(��� �� (� � ���� �� ���
�� ���
� 1���( ��� &�����
$��!��� ���� ������� ����� � *"
���&� ��� ���!��� ����: ������
������� ����
� 5���� �� ��� ���!��� ���� � �
����
$��!��� 1��� + ���
� ' (1
SCULI operating manual
1 o f 1
MJFCIFSS
SCULI operating manual
1. Creating a data connection to the machine
Procedure Connect the EMT data cable to the machine and the laptop (use an adapter if
you have a USB port). Connect the dongle to the USB port. Turn the ignition switch on the machine to position 1. Start SCULI. Make the data connection to the machine.
- Click the New button.- Select the appropriate COM port. - Click Connect the message Status: Dongle OK briefly appears. The blue
progress bar Gathering variables… should then appear.
The variable editor 5 opens. The variables 6 are shown in a table. The entry 7 Active and the green flashing lamp 8 show that data is being loaded from the master board.
1
5
6
78
2
3
Gathering variables from Master4 4
SCULI operating manual
2 o f 2
MJFCIFSS
2. Modifying the view in SCULI
The first time you open SCULI, the view will still be unclear. You can customise the settings to improve the view.
Procedure Open the hierarchy 1 Standard English Wheel Loader Series 6. Adjust the column width 2 for the hierarchy structure. Hide any columns 3 which are not needed. Right-click the column header and
uncheck Address, Name and Forced.
Adjust all the columns 4 to the right width. When the view is as you want it, click the Options button 5. Click Save Column Layout 6 and then click OK 7 to save the settings.
All settings are stored and remain in place the next time you open SCULI.Even if you reinstall the program, the settings are retained.
12
3
5
4
6
7
3
SCULI operating manual
3 o f 3
MJFCIFSS
3. Information on the variablesThe first time you open SCULI, the view will still be unclear. You can customise the settings to improve the view.
Column functions Click the column headers to sort the columns in ascending or descending order. This view shows the Category column in ascending order.
1. Status: shows the status of the variables.The variable is being loaded by the master electronics. The value of the variable has not been updated. If the field is white, the current value is present.
2. Description: shows the name of the variable in German, English and French.
3. Category: the category assigns the variables to groups.Output: output signal from the master electronics to the output module. The output module attempts to adjust to the specified value. You can alter the value manually. After the ignition is turned off/on, the original value is used again. Input: input signal to the master electronics from the CAN modules (input module, sensors). You can alter the value manually. After the ignition is turned off/on, the original value is used again. Persistent: configurable value which is retained after the ignition is switched off/on. Retain: value calculated by the master electronics, which can also be changed. The value is retained after the ignition is switched off/on.Initialized: value calculated by the master electronics. You can alter the value manually. After the ignition is turned off/on, the originally calculated value is used again.
4. Value: the value is refreshed in SCULI every 1000 ms. If a line is marked with the cursor, the value is refreshed every 200 ms. You can change these settings under Options. SCULI refreshes the value internally every 100 ms.
There are two ways to change a value manually:
Click the line twice. The value is highlighted in blue and the cursor flashes. You can change the value by entering a different number or using the up/down cursor keys. Press the Enter key to accept and save the altered value.
Click the line once and press the space bar. The line is highlighted pink. Now you can alter the value using either the up/down cursor keys (slow) or the page up/down keys (fast). These altered values are applied immediately. Press the Enter key to save them.
SCULI operating manual
4 o f 4
MJFCIFSS
This method is recommended for setting the block curve, because the display on the manometer changes at the same time the value is adjusted.
5. Unit: if a value has a unit, this is shown in the Unit column.
6. Range: the range stated the possible adjustment range where applicable. Only values which correspond to a machine type can be entered as the Machine type variable.
7. Default: default values are normally specified for variables in the category Correction. The defaults are already set on new master electronics.