wenk labtec - laboratory equipment, consumables …...429 4. stirring, shaking, mixing contents...

429

4. Stirring, Shaking, MixingContents

GENERAL CATALOGUE EDITION 20

Magnetic stirrers / HotplatesMagnetic stirrer overview.....................................................................................................................................................................................Without heating, with motor.................................................................................................................................................................................Without heating, with induction ............................................................................................................................................................................Without heating, cable free ..................................................................................................................................................................................With heating and motor.......................................................................................................................................................................................With heating and induction ..................................................................................................................................................................................Accessories, Magnetic stirring bars........................................................................................................................................................................

Overhead stirrersStirrers overview ................................................................................................................................................................................................Instruments.......................................................................................................................................................................................................Stirrer Heads .....................................................................................................................................................................................................Stirrers .............................................................................................................................................................................................................

Shakers and mixersShakers overview ...............................................................................................................................................................................................Vortexer ............................................................................................................................................................................................................Orbital shakers...................................................................................................................................................................................................Reciprocating shakers .........................................................................................................................................................................................Rocking shakers .................................................................................................................................................................................................Tumbling shakers ...............................................................................................................................................................................................Thermoshakers ..................................................................................................................................................................................................Overhead shakers...............................................................................................................................................................................................Roller mixers......................................................................................................................................................................................................Microtitre plate shakers .......................................................................................................................................................................................

430430432440447448460461

465465466474476

482482483490502506508511515520522

www.wen

k-lab

tec.co

m

www.wenk-labtec.com

Magnetic Stirrers OverviewHeating Max. stirring

capacity (H2O)

(l)

Rotation speed

(rpm)

Plate dimensions

(mm)

Max. temperature

(°C)

Stiring positions

Plate material Product Cat. No. Page

No 0,048 100-2000 140 x 102 - 96 stainless steel MIXdrive 96 MTP, 2mag 6.286 230 444No 0,084 100-2000 140 x 102 - 12 stainless steel MIXdrive 12 MTP, 2mag 6.286 228 444No 0,084 100-2000 140 x 102 - 24 stainless steel MIXdrive 24 MTP, 2mag 6.286 229 444No 0,12 100-2000 140 x 102 - 6 stainless steel MIXdrive 6 MTP, 2mag 6.286 227 441No 0,25 300-1800 Ø80 - 1 PP topolino, IKA 9.720 220 432No 0,4 0-1200 120 x 470 - 5 stainless steel RO 5, IKA 9.720 208 439No 0,4 0-1200 190 x 470 - 10 stainless steel RO 10, IKA 9.720 222 439No 0,4 0-1200 280 x 470 - 15 stainless steel RO 15, IKA 9.720 226 439No 0,5 100-2000 245 x 375 - 60 stainless steel MIXdrive 60, 2mag 9.645 967 443No 0,5 100-2000 245 x 375 - 60 stainless steel MIXdrive 60 HT, 2mag 9.645 968 443No 0,8 15-1500 94 x 94 - 1 stainless steel LLG-uniSTIRRER 1 6.263 420 440No 0,8 15-1500 Ø100 - 1 polyester lab disc, IKA 9.720 480 441No 1 0-2000 Ø120 - 1 stainless steel LLG-uniSTIRRER 2 6.263 430 432No 1 0-2500 Ø115 - 1 glass color squid, IKA 9.720 365 433No 1 0-2500 115 x 115 - 1 polyester Mini MR standard, IKA 9.645 297 433No 1 100-1200 48 x 48 - 1 stainless steel MIXdrive 1 XS, 2mag 9.645 985 443No 1 100-1200 48 x 48 - 1 stainless steel MIXdrive 1 XS HT, 2mag 9.645 986 443No 1,5 0-2500 Ø160 - 1 glass big squid, IKA 9.720 470 433No 1,5 0-1300 Ø150 - 1 ABS SM27, Stuart 9.950 408 447No 1,6 15-1200 122 x 385 - 4 stainless steel LLG-uniSTIRRER 1/M4 6.263 425 440No 3 5-200 - - 1 painted Al Microstir®, Wheaton Ind. 6.286 825 438No 3 5-200 - - 4 painted Al Microstir®, Wheaton Ind. 6.286 827 438No 3 80-2000 - - 6 - Cimarec i Multipoint 6, Thermo S. 9.720 624 446No 3 80-2000 - - 15 - Cimarec i Multipoint 15, Thermo S. 9.720 625 446No 3 100-2000 - - 1 PMMA luMIX, 2mag 9.645 992 442No 3 100-1200 120 x 120 - 1 stainless steel MIXdrive 1 eco, 2mag 9.645 961 443No 3 100-1200 120 x 120 - 1 stainless steel MIXdrive 1 eco HT, 2mag 9.645 962 443No 3 100-2000 245 x 375 - 6 stainless steel MIXdrive 6, 2mag 9.645 963 443No 3 100-2000 245 x 375 - 6 stainless steel MIXdrive 6 HT, 2mag 9.645 964 443No 3 100-2000 245 x 375 - 15 stainless steel MIXdrive 15, 2mag 9.645 965 443No 3 100-2000 245 x 375 - 15 stainless steel MIXdrive 15 HT, 2mag 9.645 966 443No 3 100-2000 245 x 425 - 4 stainless steel MIX 4 MS, 2mag 9.646 010 445No 3 100-2000 245 x 425 - 6 stainless steel MIX 6, 2mag 9.645 956 445No 3 100-2000 245 x 425 - 15 stainless steel MIX 15, 2mag 9.645 957 445No 3 100-1600 - - 8 stainless steel MIX 8 XL, 2mag 9.646 026 445No 3 100-1600 - - 12 stainless steel MIX 12 XL, 2mag 9.646 027 445No 3 100-1600 - - 1 stainless steel accuMIX, 2mag 9.646 011 447No 3 120-1200 245 x 425 - 15 stainless steel MIX 15 eco, 2mag 9.645 958 445No 3 120-1400 120 x 120 - 1 stainless steel MIX 1 eco, 2mag 9.645 955 442No 3 130-1200 - - 1 stainless steel Cimarec i Mono Direct, Thermo S. 9.720 501 441No 3 130-990 - - 15 - Cimarec i Poly 15, Thermo S. 9.720 650 446No 3 150-1200 - - 1 painted Al BioStir®, Wheaton Ind. 6.286 829 438No 3 150-1200 - - 4 painted Al BioStir®, Wheaton Ind. 6.286 831 438No 5 5-250 180 x 180 - 1 stainless steel bioMIXdrive 1, 2mag 9.645 950 436No 5 5-250 130 x 270 - 2 stainless steel bioMIXdrive 2, 2mag 9.645 978 436No 5 5-250 130 x 410 - 3 stainless steel bioMIXdrive 3, 2mag 9.645 979 436No 5 5-250 270 x 270 - 4 stainless steel bioMIXdrive 4, 2mag 9.645 980 436No 5 5-250 180 x 180 - 1 stainless steal bioMIX 1, 2mag 9.646 001 437No 5 100-1500 100 x 100 - 1 ceramic C-MAG MS 4, IKA 9.720 493 434No 10 100-1500 180 x 180 - 1 ceramic C-MAG MS 7, IKA 9.720 494 434No 10 100-2000 180 x 180 - 1 stainless steel MIX 1, 2mag 9.645 954 442No 10 100-1200 180 x 180 - 1 stainless steel MIXdrive 1, 2mag 9.645 959 443No 10 100-1200 180 x 180 - 1 stainless steal MIXdrive 1 HT, 2mag 9.645 960 443No 10 100-2000 180 x 180 - 1 stainless steel atexMIXdrive 1, 2mag 6.238 005 444No 15 100-2000 150 x 150 - 1 ceramic glass UC151, Stuart 9.645 297 433No 15 100-1500 260 x 260 - 1 ceramic C-MAG MS 10, IKA 9.720 495 434No 40 60-2000 - - 1 stainless steel MIXdrive 1 XL, 2mag 9.646 028 434No 40 70-2000 225 x 225 - 1 stainless steel MIX 1 XL, 2mag 6.236 109 435No 40 100-1200 140 x 140 - 1 stainless steel steriMIXdrive, 2mag 9.646 035 435No 40 100-2000 - - 1 - Cimarec Power Direct, Thermo S. 9.720 595 441

430

4. Stirring, Shaking, MixingMagnetic stirrer overview


E & OE.

www.wen

k-lab

tec.co

m

www.wenk-labtec.com

Magnetic Stirrers OverviewHeating Max. stirring

capacity (H2O)

(l)

Rotation speed

(rpm)

Plate dimensions

(mm)

Max. temperature

(°C)

Stiring positions

Plate material Product Cat. No. Page

No 50 0-1000 350 x 350 - 1 stainless steel Midi MR 1 digital, IKA 6.284 782 439No 150 100-1200 265 x 265 - 1 stainless steel maxMix, 2mag 9.645 975 436No 150 0-1000 350 x 350 - 1 stainless steel Maxi MR 1 digital, IKA 9.720 305 439No 250 100-1200 260×260 - 1 stainless steel MAXdrive, 2mag 9.645 976 435No 1000 80-990 180 x 180 - 1 stainless steel FABdrive, 2mag 9.645 990 435Yes 0,15 100-2000 Ø 55,7 x 48 200 15 Al alloy DRYBATH 15-100, 2mag 9.646 052 460Yes 0,25 100-2000 Ø 87,2 x 78 200 8 Al alloy DRYBATH 8-250 ERL, 2mag 9.646 025 460Yes 0,4 0-1000 110 x 495 120 5 Al alloy RT 5, IKA 9.720 603 459Yes 0,4 0-1000 180 x 495 120 10 Al alloy RT 10, IKA 9.720 606 459Yes 0,4 0-1000 270 x 495 120 15 Al alloy RT 15, IKA 9.720 609 459Yes 0,4 100-2000 Ø 71,5 x 78 200 15 Al alloy DRYBATH 15-250, 2mag 9.646 053 460

Yes 1 100-2000 - 200 15 PTFE coated Al alloy STIRRING HOTPLATE 15, 2mag 9.646 051 460

Yes 1,5 100-2000 - 200 6 PTFE coated Al alloy STIRRING HOTPLATE 6, 2mag 9.646 050 460

Yes 2 100-1600 - 200 1 Al alloy hotMIX 1, 2mag 6.238 077 460Yes 3 100-1500 Ø 135 280 1 stainless steel LLG-uniSTIRRER 3 6.263 410 448Yes 5 100-1500 100 x 100 500 1 ceramic C-MAG HS 4, IKA 9.720 490 455Yes 5 100-1500 100 x 100 500 1 ceramic C-MAG HS 4 digital, IKA 9.720 441 456Yes 10 100-1500 180 x 180 500 1 ceramic C-MAG HS 7, IKA 9.720 491 455Yes 10 100-1500 180 x 180 500 1 ceramic C-MAG HS 7 digital, IKA 9.720 443 456Yes 10 100-2000 Ø 125 350 1 stainless steel RH basic 2, IKA 9.720 402 452Yes 15 50-2000 Ø 135 320 1 stainless steel RH digital, IKA 9.720 414 453Yes 15 50-2000 Ø 135 320 1 glass lining RH digital white, IKA 9.720 418 453Yes 15 100-2000 150 x 150 325 1 Al/Si alloy US152, Stuart 9.645 295 452Yes 15 100-2000 150 x 150 325 1 Al/Si alloy US152D, Stuart 9.645 299 452Yes 15 100-2000 150 x 150 450 1 ceramic glass UC152, Stuart 9.645 296 452Yes 15 100-2000 150 x 150 450 1 ceramic glass UC152D, Stuart 9.645 298 452Yes 15 100-1500 160 x 160 325 3 Al/Si alloy SB162-3, Stuart 9.950 424 459Yes 15 100-2000 Ø 135 320 1 stainless steel RH basic, IKA 9.720 411 453Yes 15 100-2000 Ø 135 320 1 glass lining RH basic white, IKA 9.720 417 453Yes 15 100-1500 260 x 260 500 1 ceramic C-MAG HS 10, IKA 9.720 492 455Yes 15 100-1500 260 x 260 500 1 ceramic C-MAG HS 10 digital, IKA 9.720 445 456Yes 20 50-1500 Ø 135 360 1 Al alloy RCT standard safety control, LLG 9.720 250 451Yes 20 50-1700 Ø 135 340 1 stainless steel RET® basic control-visc, IKA 9.720 248 454Yes 20 50-1700 Ø 135 340 1 stainless steel RET® control-visc, IKA 9.720 261 457Yes 20 50-1700 Ø 135 340 1 glass lining RET® control-visc white, IKA 9.720 231 457

Yes 20 100-1500 Ø 135 340 1 ceramic coated stainless steel LLG-uniSTIRRER 5 6.263 440 449

Yes 20 100-1500 184 x 184 550 1 ceramic glass LLG-uniSTIRRER 7 6.263 450 450

431

4. Stirring, Shaking, MixingMagnetic stirrer overview


E & OE.

www.wen

k-lab

tec.co

m

www.wenk-labtec.com

432

4. Stirring, Shaking, MixingMagnetic stirrers / Hotplates/Without heating, with motor


E & OE.

IP Protection classesIP

0123456

Characteristic 1 for special protectionNo special protectionProtection from solid objects greater than 50 mm in diameterProtection from object greater than 12 mm in diameterProtection from object greater than 2.5 mm in diameterProtection from object greater than 1 mm in diameterComplete protection against contact, Protection against dust depositComplete protection against contact, Protection from infiltration of dust

IP

0123456789

Characteristic 2 for waterproofingNo waterproofingProtection from dripping waterProtection from vertically dripping water (tilted up to 15°)Protection from sprayed water (tilted up to 60°)Protection from splashed waterProtection from water projected from a nozzleProtection against heavy seas or powerful jets of water.Protection against immersionProtection against complete, continuous submersion in water.Protection against the ingress of water from all directions even under greatly high pressure on the housing. (High-pressure/steam cleaner, 80-100 bar)

Magnetic stirrer LLG-uniSTIRRER 2Compact and cost-efficient magnetic stirrer without heating for volumes up to 1000 ml. Adjustable speed from 0 to 2000 rpm. Plate diameter 120 mm. Body made of ABS.

Support rod, aluminium (Cat. No. 6.263 435) available as an optional accessory.

1

SpecificationsStirring quantity (H2O): 1000 mlSpeed range: 0 to 2000 rpmPermissible ambient temperature: 0 to 50 °CPermissible relative moisture: 85 %Material: ABS caseDimensions (W x D x H): 150 x 135 x 53 mmWeight: 0.5 kgPower supply: 100-230 V, 50/60 HzProtection class: IP 21Warranty: 3 years

Type PK Cat. No.

LLG-uniSTIRRER 2 with EU-plugLLG-uniSTIRRER 2 with UK-plugSupport rod, 25 cm, aluminum

111

6.263 4306.263 4316.263 435

1

Magnetic mini-stirrers topolinoWithout heating. Extremely convenient magnetic mini-stirrer for mixing volumes up to 250 ml.- Durable, brushless motor- Infinitely variable speed range- Strong magnetic coupling

2IKA

SpecificationsStirring quantity max. (H2O): 250 mlSpeed range: 300 rpm to 1800 rpmDimensions (W x H x D): 95 x 37 x 115 mmProtection category: IP 21Permissible ambient temperature: 5 °C to 40 °CPermissible relative humidity: 80 %Material: PPPower supply: 100-240 V

Type Dimensions PK Cat. No.mm

topolino 95 x 37 x 115 1 9.720 220

2

IP 64{6: Complete protection against contact, Protection from infiltration of dust

4: Protection from splashed water

www.wen

k-lab

tec.co

m

www.wenk-labtec.com

433



E & OE.

Magnetic stirrer color squid/big squidWithout heating. Small magnetic stirrers with digital speed display (LED).- Electronically controlled motor for more capacity- Higher range of speeds from 0 rpm to 2500 rpm- Excellent chemical resistance due to glass top and plastic base in TPC-ET- Manufactured in recyclable materials- Power supply with adapter for EU/CH/UK/USA

1

2

IKA

Specifications color squid/big squidStirring volume (H2O): 1 L/1.5 LSpeed display: digital (LED)Speed range: 0 to 2500 rpmTop plate dimensions: 115 mm diam./160 mm diam.Dimensions (W x D x H): 145 x 160 x 45 mm/185 x 205 x 45 mmPermissible ambient temperature: 5 to 40 °CPermissible relative humidity: 80 %Protection class acc. to DIN EN 60529: IP 54Supply requirements: 100-240 V, 50/60 HzTested to DIN EN IEC 61010-1.

Type PK Cat. No.

color squidbig squid

11

9.720 3659.720 470

Optional accessories: Ikaflon®- stirring bars, Trika®- stirring bars, RSE Stirring bar retrieverFurther models available on request.

1

2

9.720 470

Magnetic stirrer Mini MR standardWithout heating.- For stirring quantities up to 1 L (H2O).- Infinitely variable speed from 0 to 2500 rpm- White top plate suitable for observing colour reactions- Power supply with adapter for EU/CH/UK/USA

3IKA

SpecificationsMax. stirring volume, (H2O): 1LSpeed range: 0 to 2500 rpmTop plate: 115 x 115 mm Polyester filmSize (W x D x H): 114 x 127 x 37 mmProtection to DIN EN 60529: IP 42Supply requirements: 100-240 V, 50/60 Hz.Tested to DIN EN IEC 61010-1.

Type PK Cat. No.

Mini MR standard 1 9.720 211

3

Magnetic stirrer UC151Without heating. Glass ceramic top plate 150 x 150 mm. Electronic variable speed control with off position.

4Stuart

SpecificationsMax. stirring capacity (H2O): 15 lSpeed: 100 to 2000 rpmDimensions (W x D x H): 172 x 248 x 107 mmProtection category: IP 32Permissible ambient temperature: +5 to +40 °CPermissible relative humidity: < 80 %Plate material: glass ceramicPower supply: 230 V, 50 Hz

Type PK Cat. No.

UC151 1 9.645 297

4

www.wen

k-lab

tec.co

m

www.wenk-labtec.com

434



E & OE.

Magnetic stirrers C-MAG MS 4/C-MAG MS 7/C-MAG MS 10Without heating. With glass ceramic top plate which offers excellent chemical resistance.- powerful motor for stirring quantities of up to 5 l, 10 l, or 15 l (H2O)- raised control panel for protection against leaking liquids

123

IKA

SpecificationsMagnetic stirrerStirring volume max. (H2O)C-Mag MS 4 / MS 7 / MS 10: 5 l / 10 l / 15 lMotor rating input/output: 15 / 1.5 WSpeed range: 100 to 1500 rpmSpeed display: scaleMax. magnetic bar (L x dia.)C-MAG MS 4: 30 x 8 mmC-MAG MS 7/MS 10: 80 x 10 mmSet-up plateMaterial: glass ceramicDimensions (W x D)C-MAG MS 4: 100 x 100 mmC-MAG MS 7: 180 x 180 mmC-MAG MS 10: 260 x 260 mmDimensions (W x D x H)C-Mag MS 4: 150 x 260 x 105 mmC-Mag MS 7: 220 x 330 x 105 mmC-Mag MS 10: 300 x 415 x 105 mmWeightC-Mag MS 4 / MS 7 / MS 10: 3 kg / 5 kg / 6 kgProtection class acc. to DIN EN 60529: IP 21Tested to DIN EN IEC 61010-1.

Type PK Cat. No.

C-MAG MS 4C-MAG MS 7C-MAG MS 10

111

9.720 4939.720 4949.720 495

1

9.720 493

2

9.720 494

3

9.720 495

Magnetic stirrer MIXdrive 1 XLUltra flat, compact and strong magnetic stirrer with fully automatic stirring bar monitoringmixWATCH, up to 40 litres stirring volume, also suitable for highly viscous media, very strongmagnetic coupling, therefore predestined for magnetic power transmission over wide distances or for thick vesselbottoms. Maintenance-free 2mag-motor-drive with large speed range from 70 up to 2000 rpm, temperature resistantup to +150 °C, designed for use in ovens, extremely robust construction and performance, easy to clean and firm.

Control unit MIXcontrol XLPowerful control unit for MIXdrive 1 XL, wide speed range 70 to 2000 rpm, jerk-free, even and smooth stirring even atslow speeds, incl. mixWATCH, stirring bar monitoring with fully automatic trim of the maximum reachable speed, forreliable and unattended operation, digital display, 4-step power setting, high power setting for viscous liquids andreduced power setting for long-term operation without warming effect, adjustable SoftStart for differentvolumes/viscosities, adjustable interval times for automated restart, QuickStop against after-run and glass breakage,RS 232.

3 years warranty, Made in Germany.Please order control unit separately.

42mag

SpecificationsAmbient temperature: +5 to +150 °C (at 95 % humidity)Housing: stainless steel, hermetically sealedProtection class: IP 66

Type Stirringcapacity

Dimensions(W x D x H)

Rotationspeed

Power Weight PK Cat. No.

ml mm rpm W kgMIXdrive 1 XLMIXcontrol XL

1000 - 40000-

225 x 225 x 38200 x 155 x 48

-70 - 2000

2020

3.41.8

11

9.646 0289.646 029

4

www.wen

k-lab

tec.co

m

www.wenk-labtec.com

435



E & OE.

Magnetic stirrer MIX 1 XLWear-free 2mag motor drive, powerful, up to 40 liters, 70-2000 rpm, internal controllerwith 20 watts, incl. mixWATCH stirring bar monitoring with fully automatic trim of the max.Reachable speed for reliable and unattended operation, digital display, 4-step power setting for high power with regardto large and viscous media and reduced power for warming-free continuous operation, adjustable SoftStart for differentvolumes/viscosity, QuickStop against after-run and breakage, reliable sealed stainless-steel housing, 3 years warranty.Made in Germany.

12mag

SpecificationsOperating conditions: -10 °C to +50 °C at 95 % R.H. max.Housing: Stainless steelProtection category: IP 64



Rotationspeed


ml mm rpm W kgMIX 1 XL 500 - 40000 225 x 280 x 35 70 - 2000 20 (4-steps) 4.0 1 6.236 109

1

Magnetic stirrer steriMIXdrive with external controlPressure, steam, vacuum and temperature resistant.Maintenance-free 2mag-motor-drive with large speed range from 100 rpm up to 1200 rpm,fully encapsulated, pressure and vacuum resistant housing, IP 68, temperature resistant up to +150 °C, extremelyrobust construction and performance, easy to clean and firm. 3 years warranty. Made in Germany.Please order control unit separately.

22mag

SpecificationsOperating conditions: -10 to +150 °C at 100 % R.H. max.Housing: PPSU, hermetically sealedProtection category: IP 68/IP 20 (control)

2



Rotationspeed

Rating Weight PK Cat. No.

l mm rpm W kgsteriMIXdrivesteriMIXcontrol*

1 - 40-

140 x 140 x 32200 x 175 x 48

-100 - 1200

2020

9.01.8

11

9.646 0359.646 036

* Control unit.

Magnetic stirrer FABdrive/MAXdrive with external controlStirring Systems for Viscous Liquids or Volumes up to 1000 liters.

Outstanding powerful magnetic stirrer, up to 1000 liters, for stirring over larger distances or heavy-walled reservoirbases and for jacked reaction vessels, extremely powerful magnetic coupling, maintenance-free 2mag-motor-drive,speed range 80-990 rpm, adjustable SoftStart for different volumes/viscosities, QuickStop against motor overrun andglass breakage, closed stainless steel housing, sealed, IP 64, robust and reliable construction, easy to clean, separatecontrol unit with digital display, display of set speed and actual speed, 3 years warranty, made in Germany.

MAXdrive:Identical to FABdrive, but for 250 liters, speed range 100-1200 rpm, housing with large surface, load up to 300 kg,separate control unit identical to FABcontrol, but with display of set speed.

Please order control unit separately!

3

4

2mag

SpecificationsOperating conditions: -10 to +50 °C at 95 % R.H. max.Casing: Stainless steelProtection category: IP 64



Rotationspeed


l mm rpm W kgFABdriveFABcontrol*MAXdriveMAXcontrol*

1 - 1000-1 - 250-

180 x 180 x 75200 x 175 x 48260 x 260 x 68200 x 175 x 48

-80 - 990-100 - 1200

1001004040

9.02.09.02.0

1111

9.645 9909.645 9919.645 9769.645 977

* Control unit

3

9.645 990

4

9.645 976

www.wen

k-lab

tec.co

m

www.wenk-labtec.com

436



E & OE.

Magnetic stirrer maxMIXMaintenance-free 2mag motor drive. Without heating. For universal stirring applicationsin science and industry up to 150 L. Suitable for use with heavy-walled reservoir bases,round bottom flasks and jacketed reaction vessels. Can also stir over larger distances (max. 60 mm). With long range,extremely powerful magnetic field, which produces dual torque when starting up. Offers optimal operation safety byconsistent speed regulation and 3 second quick-stop without motor overrun. Adjuastable SoftStart, digital speeddisplay. Can be cleaned under running water. Supplied with mains adapter for 230 V, 50/60 Hz. 3 years warranty. Made in Germany.

12mag

SpecificationsSpeed accuracy: ±0.25 %Digital display: Adjustable SoftStart (10 to 60 sec.)Operating conditions: -10 to +50 °C at 80 % R.H. max.Housing: Stainless steelProtection category: IP 64



Rotationspeed


ml mm rpm W kgmaxMIX 1 to 150000 265 x 320 x 68 100 to 1200 40 9.3 1 9.645 975

1

Accessories for 2mag magnetic stirring systems

2

3

2mag

Description PK Cat. No.

Enlargement frame maxFRAME for MIX/MAXdrive,footprint 500 x 500 mm, loading capacity 1000 kgMobile stand mixCADDY for FABdrive,for vessels up to diam. 570 mm, loading capacity 250 kgExtension cable for MIXdrive, 3 mExtension cable for bioMIXdrive, 3 mExtension cable for MAXdrive/FABdrive, 3 m

1

1

111

9.646 056

9.646 045

9.646 0419.646 0429.646 043

2

9.646 056

3

9.646 045

Magnetic stirrer for cell cultures with external control, bioMIXdrive 1/2/3/4

Maintenance free motor drive. Magnetic stirrer with 1/2/3/4 stirring positions, for careful,protective and warming-free mixing of cell cultures and culture broths, also for viscouscultures, maintenance-free, large surface. 100 % jerk-free, speed range 5 rpm to 250 rpm, encapsulated stainless steelhousing, water-, dust-, germproof, IP 68, submersible, easy to clean, robust construction, flat design, suitable forpropeller and spinning ball culture flasks, individual measurement on request.

3 years warranty. Made in Germany. Suitable for underwater use.Please order control unit separately.

4

2mag

SpecificationsPermitted operation conditions: -10 up to +50 °C at 100 % H.R. max.

+50 °C submerged in waterHousing: Stainless steelProtection class: IP 68

4



Stirringcentredistances

Stirring positions

Rotationspeed


ml mm mm rpm W kgbioMIXdrive 1bioMIXdrive 2bioMIXdrive 3bioMIXdrive 4

5 to 50005 to 50005 to 50005 to 5000

180 x 180 x 38130 x 270 x 38130 x 410 x 38270 x 270 x 38

-140140140

1234

5 to 2505 to 2505 to 2505 to 250

5555

2.52.53.54.7

1111

9.645 9509.645 9789.645 9799.645 980

www.wen

k-lab

tec.co

m

www.wenk-labtec.com

437



E & OE.

Control units for stirring drives bioMIXdrivebioMIXcontrolControl unit for 1x bioMIXdrive 1/2/3/4, speed range 5 rpm to 250 rpm, power setting (10 steps) for high power with regard to largeand viscous media and reduced power for warming-free continuous operation e.g. in CO2 incubators, digital display, SoftStart, stainless steel housing. 3 years warranty. Made in Germany.

bioMIXcontrol SIdentical to bioMIXcontrol, but with stackable housing and vertical control panel.

bioMIXcontrol MS4Identical to bioMIXcontrol, but for 4x bioMIXdrive 1, individual and independent speed setting for each stirring drive, also ON-/OFF-function, synchronous speed mode for all drives with one touch.

12

2mag

SpecificationsOperation conditions: 0 to +50 °C at 80 % H.R. max.Operating voltage: 100-240 V, 50/60 Hz, 1.5 AHousing: Stainless steelProtection category: IP 20

Type Dimensions(W x D x H)

Rotationspeed


mm rpm W kgbioMIXcontrolbioMIXcontrol SbioMIXcontrol MS4*

200 x 155 x 38215 x 120 x 57200 x 155 x 38

5 to 2005 to 2005 to 200

4-40 (10-steps)4-40 (10-steps)

6

1.41.42.5

111

9.645 9519.645 9819.645 982

* only for bioMIXdrive 1

1

9.645 981

2

9.645 982

Magnetic stirrer for cell cultures with internal control bioMIX 1

Maintenance-free, 2mag stepper-motor drive for extremely slow and 100 % jerk-free,gentle mixing of cell cultures, with extended speed range from 5rpm up to 250 rpm, even andsmooth stirring at slow speeds, power setting (10-steps) for high power when stirring large and viscous media volumesand reduced power for non-warming, continuous operation. Digital display for speed and power setting, SoftStart forreliable and safe acceleration of the stirring bar, QuickSet for rapid setting of start and maximum speed, memory of lastworking status when switched off, suitable for culture flasks with spinning propeller or spinning ball systems. 3 years warranty. Made in Germany.

Please note: We recommend, due to reduced heat emission, the specially developed series bioMIXdrive for use inincubators.

3

2mag

SpecificationsPerm. operating temperature: -10 to +50 °C at 80 % R.H. max.

-40 to +50 °C, 10 to 95 %, 500 to 1060 hPaHousing: Stainless steelProtection class: IP 64



Rotationspeed


ml mm rpm W kgbioMIX 1 5 - 5000 188 x 230 x 38 5 - 250 6 (10-steps) 4.0 1 9.646 001

3

www.wen

k-lab

tec.co

m

www.wenk-labtec.com

438



E & OE.

Magnetic stirrers Microstir®

- Ideal for low speed shear sensitive mixing- 5 to 200 rpm, single and four place units- Programmable, remote control and alarm capable

1

Wheaton Industries

SpecificationsStirring quantity (H2O): 3 lSpeed range: 5 to 200 rpmPermissible ambient temperature: 15 to 40 °CPermissible relative moisture: 80 % to 31 °C/50 % at 40 °CMaterial: painted aluminiumDimensions (W x D x H)1 stirring position: 203 x 249 x 92 mm4 stirring positions: 394 x 445 x 102 mmWeight1 stirring position: 1.9 kg4 stirring positions: 4.5 kgPower supply: 200-240 VAC, 50/60 HzProtection class: IP 21Warranty: 2 years

Stirring positions


1144

with EU plugwith UK plugwith EU plugwith UK plug

1111

6.286 8256.286 8266.286 8276.286 828

1

6.286 825

Magnetic stirrers BioStir®

- Ideal for general mixing and difficult to dissolve solutes- 150 to 1200 rpm, single and four place units- Programmable, remote control and alarm capable

2

Wheaton Industries

SpecificationsStirring quantity (H2O): 3 lSpeed range: 150 to 1200 rpmPermissible ambient temperature: 15 to 40 °CPermissible relative moisture: 80 % to 31 °C/50 % at 40 °CMaterial: painted aluminiumDimensions (W x D x H)1 stirring position: 203 x 249 x 92 mm4 stirring positions: 394 x 445 x 102 mmWeight1 stirring position: 1.9 kg4 stirring positions: 4.5 kgPower supply: 200-240 VAC, 50/60 HzProtection class: IP 21Warranty: 2 years

Stirring positions


1144

with EU plugwith UK plugwith EU plugwith UK plug

1111

6.286 8296.286 8306.286 8316.286 832

2

6.286 831

Remote control unit for Magnetic stirrers MicroStir®/BioStir®

- Ideal for sensitive procedures or difficult to reach areas- Same interface layout as Micro-Stir® and BioStir® stirrers- Slim communication cord, no power cord required

Wheaton Industries

Type PK Cat. No.

Remote control unit for Magnetic stirrers MicroStir® / BioStir® 1 6.286 833

www.wen

k-lab

tec.co

m

www.wenk-labtec.com

439



E & OE.

Magnetic stirrers, MR 1 digitalWithout heating.- high power- flat stable stainless steel housing- non-locking motor- adjustable speed- LED digital speed display- 0 to 56 minute timer, or continuous operation

1IKA

SpecificationsMotor rating input/output: 70/19 WMax. volume stirred (H2O): 50 LSpeed range: 0 to 1000 rpmTop plate: 350 x 350 mm, Stainless steel (AISI 304)Interface: RS 232Dimensions W x D x H: 360 x 430 x 110 mmWeight: 10.7 kgProtection system to DIN EN 60529: IP 21Supply requirements: 230 V, 50/60 HzTested to DIN EN IEC 61010-1.

Type PK Cat. No.

Midi MR 1 digitalMaxi MR 1 digital, Max. volume stirred 150 L

11

6.284 7829.720 305

1

Multi-position magnetic stirrers RO 5/10/15 seriesWithout heating. 5, 10 or 15-position digital magnetic stirrers, designed for synchronous stirring. The magnetic coil technologyprovides noiseless and consistent stirring on all positions. Speed remains constant, even when load changes. The closed and compactdesign allows easy cleaning and protects the equipment against the penetration of liquids. Additionally, a removable transparent anti-slip mat is included.

- Adjustable reverse operation- Eco-mode for a low self-warming of the surface- Wear free magnetic coils- Error Code Display- Easy operation with touch keypad- Suitable for continuous operation- Adjustable speed in increments of 10 rpm

2

3

IKA

SpecificationsMax. stirring quantity per stirring position (H2O): 0.4 lDistance between stirring places: 90 mmDeviation for individual stirring positions: 0 %Speed range: 0 to 1200 rpmSpeed display: LED lineSet-up plate material: stainless steel 1.4301Protection class acc. to DIN EN 60529: IP 40Power supply: 100-240 V, 50/60 Hz


Stirring positions

PK Cat. No.

mmRO 5RO 10RO 15

120 x 570 x 60190 x 570 x 60280 x 570 x 60

51015

111

9.720 2089.720 2229.720 226

2

9.720 208

3

9.720 226

Magnetic stirring bars and stirring bar retrievers please see page 448.

www.wen

k-lab

tec.co

m

www.wenk-labtec.com

1 2

440

4. Stirring, Shaking, MixingMagnetic stirrers / Hotplates/Without heating, with induction


E & OE.

Magnetic stirrer LLG-uniSTIRRER 1An ultra-flat inductive magnetic stirrer without heating with timer. The modern magnet coil technology consists only of non-moving parts and thereforeguarantees a wear-free drive.For a better mixing of samples it is possible to change the direction of rotation every 30 seconds.

- Timer (1 min to 99 min, infinetly)- 100 % wear- and maintenance-free inductive drive- LED-display for an exact adjustment of the rotation speed- Digital regulated rotation speed- Alteration of the stirring direction- Protection class IP 65- Stainless steel surface

Delivery includes: magnetic stirrer, power cable, adapters for UK and universal plug.

1

SpecificationsStirring quantity (H2O): 800 mlSpeed range: 15 to 1500 rpmPermissible ambient temperature: 5 to 40 °CMagnetic bar: max. 25 mmDisplay: LEDHeating plate: 94 mm diam./Stainless steelDimensions (W x D x H): 110 x 155 x 12 mmWeight: 0.5 kgPower supply: 100-230 V, 50/60 HzProtection class: IP 65Warranty: 3 years

Type PK Cat. No.

LLG-uniSTIRRER 1 1 6.263 420

4-Position-Magnetic Stirrer LLG-uniSTIRRER 1/M4An ultra-flat inductive magnetic stirrer without heating with timer. The modern magnet coil technology consists only of non-moving parts and therefore guarantees a wear-free drive.For a better mixing of samples it is possible to change the direction of rotation every 30 seconds.

- Max. stirring quantity per stirring position 400 ml- Timer (1 to 99 min, infinitely)- 100 % wear- and maintenance-free inductive drive- LED-display for an exact adjustment of the rotation speed- Digital regulated rotation speed- Alteration of the stirring direction- Protection class IP 65- Stainless steel surface

2

SpecificationsStirring positions: 4Distance between Stirring postions: 95 mmMax. Stirring quantity (H2O): 4 x 400 ml = 1600 mlSpeed range: 15 to 1200 rpmPermissible ambient temperature: 5 to 40 °CMagnetic bar: max. 25 mmDisplay: LEDHeating plate (W x D): 122 x 385 mmDimensions (W x D x H): 126 x 457 x 13.5 mmWeight: 1.9 kgPower supply: 100-240 V, 50/60 HzProtection class: IP 65Warranty: 3 years

Type PK Cat. No.

LLG-uniSTIRRER 1/M4 with EU-plugLLG-uniSTIRRER 1/M4 with-UK plug

11

6.263 4256.263 426www.w

enk-l

abtec

.com

www.wenk-labtec.com

441



E & OE.

Magnetic stirrers, lab discWithout heating. Lab disc is an innovative, very flat, magnetic stirrer. It's modern, toroidalcoil technology with no moving parts guarantees a maintenance-free drive. Lab disc canautomatically change it's rotational direction every 30secs. and therefore enhances mixing of the medium.- High IP protection class (IP 65)- Set-up plate and casing made from chemically resistant materials- Slip-proof, safe stand

1

IKA

SpecificationsMax. volume stirred (H2O): 800 mlMotor rating input/output: 5 W / 3 WSpeed range: 15 to 1500 rpmStirring bar length max.: 25 mmSet-up plate material: polyesterSet-up plate dimensions: Ø 100 mmDimensions (W x H x D): 117 x 12 x 180 mmPermissible ambient temperature: 5 °C to 40 °CPermissible relative humidity: 80 %Protection category: IP 65Voltage/Frequency 100-240 V, 50/60 Hz


lab disc white EU/CHlab disc white UK

11

9.720 4804.008 137

Optional accessories: Ikaflon®- stirring bars, Trika®- stirring bars, RSE Stirring bar retriever

1

9.720 480

Magnetic stirring bars and stirring bar retrievers please see page 448.

Magnetic stirrer, Cimarec i Mono DirectWith powerful magnets and no moving parts, these inductive-drive stirrers are the perfectchoice for your general laboratory needs.- Large, flat, easy to clean work surfaces- Compact, space saving design- Initital acceleration is gradual and gentle, ensuring optimum magnetic coupling- Adjustable power settings are separate from the speed control- Decreases power consumption- Lowers heat output- Easy-to-use rotary knob design- Rugged powder coated stainless steel housing

2

Thermo Scientific

SpecificationsOperating conditions: -10 to +40 °C at 95 % R.H. max.Housing: Stainless steelColour: Grey



Rotationspeed

Power Protection-level

PK Cat. No.

ml mm rpm WMono Direct 1 - 3000 180 x 215 x 35 130 - 1200 1-5 32 1 9.720 501

2

Magnetic stirrer, Cimarec Power DirectSuper flat, powerful magnetic stirrer for volumes from 100 ml up to 40 L, with long-range,magnetic field for stirring over long distances up to max. 40 mm, ideal for thick-walled,glass vessels, round bottom flasks or double-walled containers, wash- and abrasion-resistant, stainless steel housing,speed range 100 rpm to 2000 rpm with feedback control, quick stop within 2 sec., 4-step stirring power adjustment (5 W/10 W/15 W/20 W), digital speed display, bi-directional RS 232 interface allowing up to 14 units to be directly andindividually controlled by the user's PC and 24V d.c. output, a.c. adapter for 100 - 240V. Ambient operatingtemperature: -10 to +40 °C.Protection class: IP 22.

Thermo Scientific


Rotationspeed


mm rpm W kgPower Direct 240 x 295 x 35 100 - 2000 5/10/15/20 2.5 1 9.720 595

33

www.wen

k-lab

tec.co

m

www.wenk-labtec.com

442



E & OE.

Magnetic stirrer MIX 1 and MIX 1 ecoWear-free inductive drive, powerful, up to 10 liters, 100-2000 rpm, internal controller with 20 watts, digital display, 4-step powersetting for high power with regard to large and viscous media and reduced power for warming-free continuous operation, adjustableSoftStart for different volumes/viscosity. 3 years warranty. Made in Germany.

MIX 1 ecoIdentical to MIX 1, but price optimized, up to 3 liters, speed range 120-1400 rpm, extremely robust, simple operation by speed knob and scale.

12

2mag




Rotationspeed


ml mm rpm W kgMIX 1MIX 1 eco

1 - 100001 - 3000

188 x 238 x 38120 x 120 x 35

100 - 2000120 - 1400

20 (4-steps)10

4.01.7

11

9.645 9549.645 955

1

9.645 954

2

9.645 955

Magnetic stirrer luMIX with light functionUltra flat, 100 % maintenance-free and wear-free, 2mag magnetic induction drive concept. Magnetic stirrer with 1 large stirringposition and a luminescent plate, up to 3000 ml stirring volume, also suitable for viscous media. Stirring function and illuminationfunction separately switchable.

Light: Bright and warming-free luminescent PMMA plate, white LEDs with homogenous brightness and variable light intensity (4-step), non-reflectingillumination.

Stirring: 100 % maintenance-free and wear-free by inductive 2mag-Magnetic-Drive concept for powerful mixing of solutions, extremely wide speed range from100 rpm to 2000 rpm, jerk-free stirring even at low speeds, 4-step power settings for high power with regard to large and viscous stirring volumes and reducedpower for the warming-free continuous operation.Clear digital display for light-, speed- and power settings.

32mag

SpecificationsPerm. operating temperature: -10 to +50 °C at 80 % R.H. max.

-40 to +70 °C, 10 to 95 %, 500 to 1060 hPaHousing: Stainless steelProtection class: IP 64



Rotationspeed


ml mm rpm W kgluMIX 1 - 3000 188 x 238 x 44 100 - 2000 20 3.6 1 9.645 992

3

www.wen

k-lab

tec.co

m

www.wenk-labtec.com

443



E & OE.

Multi-position magnetic stirrers MIXdrive with external control use in waterbathand oven

Without heating. With non-mechanical, electronic inductive drive and dust/water tighthousing, 100 % wear-free and maintenance-free. Ideal for batch series stirring and foruse in water baths. Choice of 6-place stirring position models which can stir up to 6 x 1 L erlenmeyer flasks, 15-place models for up to 15 x 250 ml beakers (high form) and 60-place models for small sample containers andusing appropriate test tube stands, up to 60 test tubes or centrifuge tubes. Control units available as price-optimizedeco 10 W, high-power 20 W or ultra high-power 40W version. Preselectable mixing power. SoftStart. 3 years warranty. Made in Germany.

Please order control unit separately.

1

2mag

SprecificationsOperating conditions: -10 °C to +50 °C at 100 % R.H. max.Operating temp. rangeStandard: in air and water +50 °CHT-Version: in air (ovens) +200 °C, in water +95 °CStirrer unit housing: Stainless steelProtection category: IP 68

1




Stirring positions

Weight PK Cat. No.

ml mm mm kgMIXdrive 1 XSMIXdrive 1 XS HTMIXdrive 1 ecoMIXdrive 1 eco HTMIXdrive 1MIXdrive 1 HTMIXdrive 6MIXdrive 6 HTMIXdrive 15MIXdrive 15 HTMIXdrive 60MIXdrive 60 HT

1 - 10001 - 10001 - 30001 - 30001 - 100001 - 100001 - 30001 - 30001 - 30001 - 30001 - 5001 - 500

48 x 48 x 1848 x 48 x 18120 x 120 x 35120 x 120 x 35180 x 180 x 38180 x 180 x 38245 x 375 x 38245 x 375 x 38245 x 375 x 38245 x 375 x 38245 x 375 x 38245 x 375 x 38

130130656532.532.5

1111116615156060

0.30.31.51.53.33.38.98.99.59.59.59.5

111111111111

9.645 9859.645 9869.645 9619.645 9629.645 9599.645 9609.645 9639.645 9649.645 9659.645 9669.645 9679.645 968

Please order control unit MIXcontrol separately.

Control units for mixers MIXdriveMIXcontrol eco: Prize-optimized control unit, speed setting and ON/OFF by turning 2 units.

MIXcontrol 20: Stainless steel housing, digital speed display, 4-step power setting, 20 watts.

MIXcontrol 40: Identical to MIXcontrol 20, but 10-step power setting, 40 watts, 2 sockets for MIXdrive stirres.

2

2mag


Rotationspeed


mm rpm W kgMIXcontrol ecoMIXcontrol 20MIXcontrol 40

65 x 50 x 45200 x 155 x 38200 x 155 x 38

120 - 1200100 - 1600100 - 2000

102040

0.51.41.4

111

9.645 9699.645 9709.645 971

2

9.645 971

Magnetic stirrers cuvetteMIXdrive 1 for miniature volumesSmallest stirrer in the world. 100 % maintenance-free and wear-free, 2mag magnetic inductiondrive concept, Fully encapsulated and hermetically sealed stainless steel housing, IP 68, water-, dust-and germproof. Extremely robust construction and performance, easy to clean.


2mag

SprecificationsOperating conditions: -10 °C to +50 °C at 100 % R.H. max.Operating temp. range: in air and water +50 °CStirrer unit housing: PURProtection category: IP 68

Type Stirring positions

Stirringcapacity


Weight PK Cat. No.

ml mm kgcuvetteMIXdrive 1 1 1 to 25 13 x 13 x 6 0.1 1 9.645 987

33

www.wen

k-lab

tec.co

m

www.wenk-labtec.com

444



E & OE.

Stirring Drives for Microtiter Plates MIXdrive MTP

Ultra-flat, compact, wear-free, powerful magnetic stirring drive for microtiter plates with6/12/24/96 positions, external control unit, hermetically sealed, fully encapsulated stainlesssteel housing, IP 68, water-, dust- and germproof, robust construction, easy to clean, maximum resistance, submersiblein water- resp. oil baths, up to +50 °C. For use in CO2 incubators/ovens, removable centering pins, ideal for integrationinto robots. Individual dimensions and high temperature version up to +200 °C on request.

Please order control units separately.

1

2mag

SpecificationStirring power (max.): 10 WOperation conditions: -10 °C up to +50 °C in air, +50 °C in water (submersed)Operating voltage (max.): 48 VDCHousing material: stainless steelProtection category: IP 68

1




Stirring positions

Weight PK Cat. No.

ml mm mm kgMIXdrive 6 MTPMIXdrive 12 MTPMIXdrive 24 MTPMIXdrive 96 MTP

1 - 20*1 - 7*1 - 3,5*0,1 - 0,5*

140 x 102 x 26140 x 102 x 26140 x 102 x 26140 x 102 x 26

3926199

6122496

1.31.31.31.3

1111

6.286 2276.286 2286.286 2296.286 230

* per stirring point

Control Units for Stirring Drive MIXdrive MTPMIXcontrol 20 MTPStainless steel housing, digital speed display, 100-2000 rpm, 4-step power setting

MIXcontrol 20 RS232with RS 232 interface

22mag


Rotationspeed


mm rpm W kgMIXcontrol 20MIXcontrol 20 RS232

200 x 155 x 38200 x 155 x 38

100 - 2000100 - 2000

1010

1.41.4

11

6.286 2316.286 232

2

Magnetic stirring atexMIXdrive 1 with external controlExplosion protected.1 stirring position, 100 % maintenance-free and wear-free by inductive 2mag-Magnetic-Driveconcept for powerful mixing of solutions, jerk-free stirring even at low speeds. Fully encapsulated and hermeticallysealed stainless steel housing, IP 68, water, dust and germproof, extremely robust construction and performance. Easyto clean and maximum resistance, submersible in water, oil baths, suitable for the use in CO2 incubators and ovens,temperate range up to +40 °C. Certified according to ATEX II 2G Ex mb IIC T4.


3 42mag

SpecificationsOperating conditions: -10 °C to +40 °C at 100 % R.H. max.

+40 °C immersed in waterCasing: Stainless steelProtection category: IP 68

3

4




l mm W kgatexMIXdrive 1atexMIXcontrol cleanroom*

0.001 - 10-

180 x 180 x 38210 x 55 x 30

2020 (4 steps)

3.53.6

11

6.238 0059.646 000

* Control unit explosion protection zone 2.

www.wen

k-lab

tec.co

m

www.wenk-labtec.com

445



E & OE.

Multi-position Magnetic stirrer with internal control MIX 4 MSPowerful 4-position stirring, 100 % maintenance-free and wear-free, 2mag magnetic induction drive concept, with individual andindependent speed setting for each stirring position (Master-Slave-Technology). On-/Off function, synchronous speed mode forall positions, extremely wide speed range of 100 rpm to 2000 rpm, jerk-free stirring even at low speeds.

Clear digital display for settings of stirrer speeds, SoftStart procedure for reliable stirrer bar coupling/centring and safe acceleration, automatic memory functionto save the last settings, outstanding long working life of the hermetically sealed drive system and resistant stainless steel housing for easy and fast cleaning.

12mag

SpecificationsHousing: Stainless steelProtection class: IP 64

1



Stirring positions

Rotationspeed


ml mm rpm W kgMIX 4 MS 1 to 3000 245 x 425 x 38 4 100 to 2000 28 8.9 1 9.646 010

Multi-position magnetic stirrers MIX 6/15/8 XL/12 XLWithout heating. With non-mechanical, electronic induction drive, 100 % wear-free and maintenance-free. Ideal for batch seriesstirring. Choice of 6-place, stirring position models which can stir up to 6 x 1000 ml. Erlenmeyer flasks or 15-place models for up to15 x 250 ml (high form) or 8/12 x 600 ml beakers (high form). Digital stirring speed display and soft-start function. With 4 adjustable power level stirringspeeds (5 W to 20 W). Easy to clean, hermetically sealed casing which can be washed under running water, ultra flat, space-saving profile and 100 %synchronous speed control in all stirring positions. SoftStart. 3 years warranty, Made in Germany.

22mag


2




Stirring positions

Rotationspeed

Weight PK Cat. No.

ml mm mm rpm kgMIX 6MIX 15MIX 8 XLMIX 12 XL

1 - 30001 - 30001 - 30001 - 3000

245 x 425 x 38245 x 425 x 38185 x 420 x 38275 x 420 x 38

130659090

615812

100 - 2000100 - 2000100 - 1600100 - 1600

8.88.86.28.8

1111

9.645 9569.645 9579.646 0269.646 027

Multi-position magnetic stirrers MIX 15 ecoWithout heating. Non-mechanical, electronic induction drive, 100 % wear-free and maintenance-free. With 15 stirring positions, e.g.for 6 L x 1 L erlenmeyer flasks or 15 ml x 250 ml beakers (high form). Suitable for mass screening and biological applications, even inhumidity incubators. With built-in controller, digital speed indicator and SoftStart drive. Supplied with mains adapter.3 years warranty. Made in Germany.

32mag

SpecificationsOperating conditions: -10 °C to + 50 °C at 80 % R.H. max.Housing: Stainless steelProtection category: IP 64

3




Stirring positions

Rotationspeed


ml mm mm rpm W kgMIX 15 eco 1 - 1500 245 x 425 x 38 65 15 120 - 1200 10 8.8 1 9.645 958

www.wen

k-lab

tec.co

m

www.wenk-labtec.com

446



E & OE.

Multi-position magnetic stirrers, Cimarec i Poly 15With non-mechanical, electronic induction drive. With 15 stirring spaces, for e.g. 6 x 1 L erlenmeyer flasks or 15 x 250 ml beakers.For mass screening and biological applications, even in humidity incubators. With built-in controller, digital speed indicator and soft-start drive. With mains adaptor.

1Thermo Scientific

SpecificationsStirring positions: 15Protection class: IP 32Operating conditions: -10 to +40 °C at 95 % R.H. max.Housing: stainless steel, powder coatedColour: grey


Rotationspeed

Power PK Cat. No.

mm rpm WPoly 15 240 x 420 x 35 130 - 990 10 1 9.720 650

1

Multi-position magnetic stirrers, MultipointWith non-mechanical, electronic induction drive. Ideal for batch series stirring. Choice of 6-place, stirring position models which canstir up to 6 x 1liter erlenmeyer flasks or 15-place models for up to 15 x 250ml beakers. With digital stirring speed display and soft-start function. With 4 adjustable power level stirring speeds (5 to 20W), easy to clean, hermetically sealed casing which can be washed under running water,ultra flat, space-saving profile and 100 % synchronous speed control in all stirring positions. Supplied with mains adapter for 230 V, 50/60 Hz. Operating conditions: -10 to +40 °C at 95 % R.H. max. Housing: Stainless steel (240 x 420 x 35 mm).Protection class: IP 64Stirring capacity up to 3000 ml.

2

Thermo Scientific



Rotationspeed

PK Cat. No.

mm rpmMultipoint 6Multipoint 15

615

13065

80 - 200080 - 2000

11

9.720 6249.720 625

2

www.wen

k-lab

tec.co

m

www.wenk-labtec.com

447

4. Stirring, Shaking, MixingMagnetic stirrers / Hotplates/Without heating, cable free


E & OE.

Magnetic stirrer accuMIX, with battery operationMobile magnetic stirrer, 100 % maintenance-free and wear-free by inductive 2mag-Magnetic-Drive concept for mixing of solutions, speed range from 120 rpm up to 1600 rpm, jerk-freestirring also at low speeds, two-step power setting for high power with regard to large and viscous stirring amounts andreduced power for battery-saving long-term operation. Constructed for the independent battery- and stationary mainsoperation, equipped with 8 commercially available high performance rechargeable batteries (Mignon/AA), universalcharging/power supply device, intelligent battery charging station with single controlled charging slots as well as batteryservice function and 12 V adapter cable for the operation at cigarette lighter car sockets.

12mag

SpecificationsOperating conditions: -10 °C to +50 °C at 80 % R.H. max.Casing: Stainless steelProtection category: IP 30



Rotationspeed


l mm rpm W kgaccuMIX 1 - 3000 215 x 130 x 40 100 - 1600 2/10 (2-steps) 2.5 1 9.646 011

1

Accessories for magnetic stirrers, see page 436.

Magnetic stirrer SM27, with battery operation.For use in the field or inside incubators or glove boxes where external power supply isimpractical. With BioCote, silver-based, antimicrobial protection. Maximum speed1300 rpm. Maximum volume stirred 1.5 L (H2O). Top plate 150 mm x 160 mm. Variable speed control with batterystatus indicator. ABS casing 70 mm high. Maximum operating conditions +60 °C and 80 % R.H. Weight 1.3 kg.

Supplied with 4 x 1.5 V size 'D' alkaline batteries giving up to 600 hours operation, and a 25 mm PTFE coated follower.Accessory adapters are available for use on 230 V, 50 Hz mains or 12 V vehicle supply using the cigar lighter socket.

2Stuart

Type PK Cat. No.

SM27 1 9.950 408

2

Magnetic stirrer, operated by water/air pressurePP-ABS construction. This unique stirrer is operated either by water pressure between1 kg/cm² and 2.5 kg/cm² (15 psi to 40 psi) or by air pressure. No electrical supply is needed,thus eliminating heat, electric shock and explosion hazards. Corrosion-proof, all-plastic construction. Can be used on the bench or clamped to a stand with a 12 mm (½") diameter rod using the integral bosshead.

3Kartell

Diam. Height PK Cat. No.mm mm129 61 1 9.303 043

3

www.wen

k-lab

tec.co

m

www.wenk-labtec.com

448

4. Stirring, Shaking, MixingMagnetic stirrers / Hotplates/With heating and motor


E & OE.

Magnetic stirrer with heating LLG-uniSTIRRER 3, complete setUniversal magnetic stirrer with all essential functions and equipment features. A LED display to control all parameters,an integrated temperature control as well as an enclosed design (IP 42) are integrated features. The included PT1000sensor ensures an exact temperature control. A stand rod with a sensor holder is supplied with this instrument. Theintegrated HOT-sign warns the user of a hot plate even if the device is switched off.

- LED display to set the exact rotation speed and the temperature- Digital controlled rotation speed and temperature- 'HOT' warning sign, even if the device is switched off- Delivered as complete set: magnetic stirrer, sensor PT1000, stand rod and sensor holder- Integrated temperature control

Delivery includes: Magnetic stirrer with PT1000 probe, rod and holder

1 2

SpecificationsStirring quantity (H2O): 3000 mlSpeed range: 100 to 1500 rpmSetting accuracy: ±10 rpmMagnetic bar: max. 50 mmDisplay: LEDHeating plate: 135 mm diam./Stainless steelPermissible ambient temperature: 5 to 40 °CTemperature range: RT to 280 °CSetting accuracy: ±1 °CControl accuracy: ±2 °CHeat output: 500 WSafety temperature: 320 °CDimensions (W x D x H): 155 x 215 x 100 mmWeight: 1.5 kgPower supply: 200-240 V, 50/60 HzProtection class: IP 42Warranty: 3 years

Type PK Cat. No.

LLG-uniSTIRRER 3 with EU-plugLLG-uniSTIRRER 3 with UK-plugStand and sensor holder for LLG-uniSTIRRER 3

111

6.263 4106.263 4116.263 416

1

2

LLG-Magnetic stirring bars, cylindrical, PTFE, eco packCircular, smooth and PTFE-coated. Packaging size: 10 pieces

3

Diam. Length PK Cat. No.mm mm63666866888999

1012152025253035404550607080

1010101010101010101010101010

9.198 9109.198 7669.198 9199.198 9209.198 9259.198 7679.198 9309.198 9359.198 9409.198 9459.198 9509.198 9609.198 9709.198 980

3

www.wen

k-lab

tec.co

m

www.wenk-labtec.com

449



E & OE.

Magnetic stirrer with heating LLG-uniSTIRRER 5, complete packageUniversal magnetic stirrer with an outstanding price-performance ratio. Safety features include a "hot" warningdisplay and a stirring function that continues to run until the plate temperature is below 50 °C, even when the deviceis switched off. A digital timer enables unattended operation and can be set from 1 min to 99 h 59 min. When the settime has elapsed, the unit stops automatically. An integrated control function offers precise control of the heated fluidtemperature via a remote PT1000 temperature probe. The device is equipped with a Ø 135 mm ceramic plate, suitablefor the LLG-Universal reaction block systems.

- Latest generation magnetic stirrer/hotplate- Maintenance-free, brushless DC motor- Timer (1 min to 99 h 59 min)- Digital control and backlit display- Stirrer and display can be controlled remotely via an RS232 interface- Hot surface indicator- White ceramic-coated, stainless steel top plate- Sturdy metal housing- Powerful stirring- Connection for PT1000, integrated control function


1 2

SpecificationsStirring quantity (H2O): 20 lSpeed range: 100 to 1500 rpmAccuracy: ±1 rpmMagnetic bar: 80 mmDisplay: LCDHeating plate: diam. 135 mm/stainless steel with ceramic surfacePermissible ambient temperature: 5 to 40 °CTemperature range: ambient to 340 °CSetting accuracy: ±0.1 °CControl accuracy: ±0.2 °CHeat output: 550 WSafety temperature: 100 to 360 °CDimensions (W x D x H): 160 x 285 x 85 mmWeight: 2.8 kgPower supply: 200-240 V, 50/60 HzProtection class: IP 42Warranty: 3 years

Type PK Cat. No.

LLG-uniSTIRRER 5 with EU-plugLLG-uniSTIRRER 5 with UK-plugSilicone Protective cover for LLG-uniSTIRRER 5

111

6.263 4406.263 4416.263 445

1

2

LLG-Magnetic Stirring Bar Retrievers, PTFE

PTFE-encapsulated stirring bar retriever with strong permanent magnet (Alnico 5), universal chemical resistance. For the removal of stirring bars from aggressive liquids, prevents loss of stirring bars. Lower end diameter 10 mm.

3


150250300350

1111

9.197 7179.197 7254.008 5019.197 735

3www.wen

k-lab

tec.co

m

www.wenk-labtec.com

450



E & OE.

Magnetic stirrer with heating LLG-uniSTIRRER 7, complete package

Universal magnetic stirrer with an outstanding price-performance ratio. Safety features include a "hot" warningdisplay and a stirring function that continues to run until the plate temperature is below 50 °C, even when the deviceis switched off. An integrated control function offers precise control of the heated fluid temperature via a remotePT1000 temperature probe. The device is equipped with a square ceramic plate (184 x 184 mm).

- Latest generation magnetic stirrer/hotplate- Maintenance-free, brushless DC motor- Digital control and backlit display- Stirrer and display can be controlled remotely via an RS232 interface- Hot surface indicator- White ceramic-coated, stainless steel top plate- Sturdy metal housing- Powerful stirring- Connection for PT1000, integrated control function- Mountable rod on the left and on the right side of the stirrer


1 2

SpecificationsStirring quantity (H2O): 20 lSpeed range: 100 to 1500 rpmAccuracy: ±1 rpmMagnetic bar: 80 mmDisplay: LCDHeating plate: 184 x 184 mm/stainless steel with ceramic surfacePermissible ambient temperature: 5 to 40 °CTemperature range: ambient to 550 °CSetting accuracy: ±0.1 °CControl accuracy: ±0.2 °CHeat output: 1000 WSafety temperature: 100 to 580 °CDimensions (W x D x H): 215 x 360 x 112 mmWeight: 5.3 kgPower supply: 200-240 V, 50/60 HzProtection class: IP 42Warranty: 3 years

Type PK Cat. No.

LLG-uniSTIRRER 7 with EU-plugLLG-uniSTIRRER 7 with UK-plug

11

6.263 4506.263 451

1

2

Magnetic stirring bar behrotest, set 1 + 2Magnetic stirring bars behrotest ®, Set 1 in a transparent box with hinged lid Consisting of: 2x 20 x 6 mm, 2x 25 x 6mm, 2x 30 x 6 mm, 2x 40 x 8 mm, 1x 50 x 8 mm, 1x 60 x 9 mm.

Magnetic stirring bars behrotest®, Set 2 in a transparent box with hinged lid including magnetic stirring bar retriever,length 245 mm.Consisting of: 1x 15 x 6 mm, 2x 20 x 6 mm, 2x 25 x 6mm, 1x 30 x 6 mm, 2x 40 x 8 mm, 1x 50 x 8 mm, 1x 60 x 9 mm

3

behr


Set 1Set 2

11

6.267 3176.267 318

3

6.267 317

www.wen

k-lab

tec.co

m

www.wenk-labtec.com

451



E & OE.

LLG-RCT standard safety controlMagnetic stirrer with new technology and new functions:- integrated temperature control- incl. PT 1000 temperature sensor (PT 1000.60)- exact temperature and speed setting via digital display, even when switched off- digital display of set safety temperature limit- hot top indicator, hot surface warning to prevent burns- digital error code display- with adjustable safety circuit of heating plate temperature (50 to 360 °C)- safety magnetic stirrer with heating, suitable for unsupervised operation- DIN 12878 connector for attaching a contact thermometer, e.g. ETS-D5;

enables precise temperature control directly in the heated medium- enhanced safety due to improved heat control technology- enclosed assembly (IP 42) guarantees long service life- highly polished, aluminium hotplate for optimal heat transfer- improved magnetic coupling- supplied with housing protection cover H 98

1 2

SpecificationsDrive unitStirring quantity (H2O): 20 LMotor rating input/output: 16/9 WSpeed display: digitalSpeed range: 50 to 1500 rpmMax. magnetic bar (L x dia.): 80 x 10 mmHeating functionSpeed display: digitalHeat output: 600 WHeating rate (1 litre H2O in H 15): 6.5 K/minTemperature range: RT to 310 °CSetting accuracy: ±1 KTemp. variation without temp. sensor: ±2 KAdjustable safety circuit: 50 to 360 °CControl accuracy with sensor: PT 1000/±1 K

ETS-D5/±0.5 KETS-D6/±0.2 K

Heating plateMaterial: aluminium alloyDimensions: 135 mm dia.General dataDimensions (W x D x H): 160 x 270 x 85 mmWeight: 2.5 kgOperating temperature range: 5 to 40 °COperating humidity range: 80 % R.H.Protection class acc. to DIN EN 60529: IP 42Tested to DIN EN IEC 61010-1.

Type Connector PK Cat. No.

RCT Standard safety control incl. PT 1000RCT Standard safety control incl. PT 1000RCT Standard safety control incl. PT 1000

CEEUKCH

111

9.720 2506.242 0874.008 142

Optional accessories: Electronic contact thermometer ETS-D5, Ikaflon® stirring bars, Trika® stirring bars, RS 1 stirring bar set, RSE Stirring bar remover, Quarter System, Reaction block System

1 2

Universal reaction block system for magnetic stirrers please see page 461.

www.wen

k-lab

tec.co

m

www.wenk-labtec.com

452



E & OE.

Magnetic stirrer/hotplate RH basic 2Low-priced, magnetic stirrer/hotplate, with heating, with stainless steel top plate.

1IKA

SpecificationsStirring volume: 10 LMotor rating input/output: 15/2 WSpeed indication: Scale (0 to 6)Speed range 100 to 2000 rpmHeating power: 400 WHeating rate (1 litre water): 3 K/minTemperature range: Amb. to +320 °CHotplate surface: Stainless steel (AISI 304), 125 mm dia.Dimensions W x D x H: 168 x 220 x 105 mmWeight: 2.4 kgProtection class acc. to DIN EN 60529: IP 21Supply requirement: 230 V 50/60 HzTested to DIN EN IEC 61010-1.


RH basic 2 1 9.720 402

1

Magnetic stirrer with heating, US152/UC152 and US152D/UC 152D- Choice of top plate: Robust coated aluminium or chemically resistant ceramic- Flashing "Hot" warning light, mains independent- Accurate temperature control with LED indicator scale- Compact space saving design

Stylish and economical general purpose hotplate stirrers designed with safety as well as performance in mind. Thecompact shape takes up less bench space and makes storage easier. The hotplate has an innovative LED temperatureindicator scale and can also be used in conjunction with the SCT1 digital contact thermometer to accurately controlsample temperature. The "Hot" warning light will flash whenever the plate temperature is above 50 °C even when thehotplate is turned off and unplugged from the mains. Powerful magnets and motor give stirring speeds up to 2000 rpmand is capable of mixing large volumes (up to 15L).

Model US152 has a robust aluminium/silicon alloy top plate for excellent heat transmission. The top plate has a thinceramic coating for added chemical resistance. A 700 W element gives rapid heating and ensures even temperaturedistribution across the whole surface of the plate.

Model UC152 has a glass ceramic top which has excellent chemical resistance. The surface is easy to clean and thethermal properties allow very high plate temperatures while ensuring the edges stay cooler, reducing the chance ofaccidental burns. The white surface ensures good visibility of colour changes.

All models have an integral fitting for a retort rod and are supplied with 2 x 25 mm PTFE coated stirring bars.

Stuart

Specification US152(D) / UC152(D)Plate Material: Coated Aluminium and Silicon / Glass ceramicPlate Dimensions: 150 x 150 mmHeated Area: 150 x 150 mm / 120 x 120 mmHeater Power: 700 W / 500 WMax plate temp: 325 °C / 450 °CStirrer Speed: 100-2000 rpmMaximum Stirring Capacity: 15 LDimensions (W x D x H): 172 x 248 x 120 mm / 172 x 248 x 122 mmWeight: 2.9 kgElectrical supply: 230 V, 50 Hz, 750 W / 230 V, 50 Hz, 550 WIP Rating: IP 32

2

9.645 298

3

9.645 342

23

Type Description PK Cat. No.

US152US152DUC152UC152DSCT1SCT 1/2SCT 1/1SR1

Analog magnetic stirrer/hotplate, coated aluminium plateDigital magnetic stirrer/hotplate, coated aluminium plateAnalog magnetic stirrer/hotplate, glass ceramic plateDigital magnetic stirrer/hotplate, glass ceramic plateDigital contact thermometerPTFE probeProbe holderRetort rod, 600 x 12mm diameter

11111111

9.645 2959.645 2999.645 2969.645 2989.645 3429.645 3449.645 3439.645 335

www.wen

k-lab

tec.co

m

www.wenk-labtec.com

453



E & OE.

Magnetic stirrers RH basic/digitalEconomic magnetic stirrer with heating. High heat output of 600 watts and the steel-coppercompound hot plate ensures rapid heating. Adjustable safety temperature from 50 to 370 °C.Soft-start stirring motor. Includes M 10 thread for a support rod. Strong magnetic field and wide speed range forvolumes up to 15 litres. RH basic white/RH digital white with chemically resistant hot plate.

RH digital only: Bushing according to DIN 12878 for connecting an electronic contact thermometer, such as theETS-D5. Highly accurate temperature control is possible with the sensor placed directly in the medium.- Digital display of temperature and speed- Error code display- Easy operation with touch keypad

1

23

IKA

SpecificationsMax. stirring quantity (H2O): 15 lMotor rating input/output: 15/2 WSpeed range: 50 to 2000 rpmSpeed display RH basic/RH digital: scale/LEDHeat output: 600 WHeating rate (1l H2O): 6 K/minTemperature range min./max. 50 to 320 °CSetting accuracy RH digital: ±5 KAdjustable safety circuit min./max.: 50 to 370 °CConnection for ext. temp. sensor: DIN 12878Control accuracy with sensor: ±1 KETS-D5/ETS-D6: ±0.5 K/±0.2 KSet-up plate: Stainless steel 1.4301, diam. 135 mmDimensions (W x D x H): 160 x 246 x 90 mmWeight: 2.8 kgProtection class acc. to DIN EN 60529: IP 21Power supply: 220-240 V, 50/60 Hz

Type PK Cat. No.

RH basicRH basic S 2 UKRH basic whiteRH digitalRH digital white

11111

9.720 4119.720 4129.720 4179.720 4149.720 418

1

9.720 411

2

9.720 414

3

9.720 418

www.wen

k-lab

tec.co

m

www.wenk-labtec.com

454



E & OE.

Magnetic stirrer/hotplates, RET basicWide speed range from 0/50 to 1700rpm. Integrated temperature control. Incl. PT1000 temperature sensor (PT 1000.60). Exact temperature and speed setting via digital display, even when switched off. Set safety temperature limit displayed digitally. Hot Top indicator: hot surface warning to prevent burns. Digital error code display.

- With adjustable safety circuit of heating plate temperature (50 to 380 °C)- Safety magnetic stirrer with heating, suitable for unsupervised operation- Bushing according to DIN 12878 for connecting a contact thermometer, e.g. ETS-D5, enables precise temperature control- High level of safety thanks to improved heat control technology- Enclosed assembly (IP 42) guarantees long service life- Very broad temperature range (RT to 340 °C)- Extremely fast heating times- Electronic speed control- High magnetic adhesion- Incl. protection cover H 100

1 2IKA

SpecificationsMagnetic stirring:Volume stirred (water): 20 LMotor rating input/output: 16/9 WSpeed adjustment: DialSpeed range: 50 to 1700 rpmMaximum magnetic stirrer bar (L x dia.): 80 x 10 mmHeatingHeat output: 600 WHeating rate (1 l H2O in H15): 7 K/minTemperature range: Amb. to 340 °CAccuracy: ±1 KSpeed control: steplessAdjustable safety circuit: min 50 °C

max 360 °CConnection for ext. temperature sensor: DIN 12 878Control accuracy with temp. probe: PT 1000/ ±1 K

ETS-D 5/ ±0.5 KHotplate material: Stainless steelDimensions: dia. 135 mmDimensions (W x D x H): 160 x 270 x 95 mmWeight: 2.5 kgProtection system to DIN EN 60529: IP 42Tested to DIN EN IEC 61010-1.Supply requirements: 230V 50/60Hz

Type PK Cat. No.

RET® basic control-viscRET® basic control-visc UK

11

9.720 2484.008 113

Optional Accessories: Electronic contact thermometer: ETS-D5, IKAFLON®- Stirring bars, TRIKA®-Stirring bars, RS 1 Set of stirring bars, RSE Stirring bar remover, Protection cover H 100,Temperatur sensors: PT 1000.60, PT 1000.70

1 2

www.wen

k-lab

tec.co

m

www.wenk-labtec.com

455



E & OE.

Magnetic stirrer C-MAG HS 4/C-MAG HS 7/C-MAG HS 10With heating. Ceramic hotplate which offers excellent chemical resistance.- powerful motor for stirring quantities of up to 5 L, 10 L or 15 L (H2O)- fixed safety circuit of 550 °C- Hot Top indicator - hot surface warning to prevent burns- exact temperature setting via digital display (LED)- digital error code display- elevated control panel for protection against spilled liquids

C-MAG HS 7 and C-MAG HS 10:Connection acc. to DIN 12878 for attaching a contact thermometer, e.g. ETS-D5; enables precise temperature control.

1

2

3

IKA

SpecificationsMagnetic stirrerStirring quantity (H2O)C-MAG HS 4: 5 LC-MAG HS 7: 10 LC-MAG HS 10: 15 LMotor rating input/output: 15/1.5 WSpeed range: 100 to 1500 rpmProtection class according to DIN EN 60529: IP 21Speed display: scaleMax. magnetic bar (L x dia.)C-MAG HS 4: 30 x 8 mmC-MAG HS 7/HS 10: 80 x 10 mmHeating functionTemperature display: digitalHeat outputC-MAG HS 4: 250 WC-MAG HS 7: 1000 WC-MAG HS 10: 1500 WHeating rate (1 l H2O)C-MAG HS 4: 2.5 K/minC-MAG HS 7/HS 10: 5 K/minHeating temperature range: 50 to 500 °CHeat control accuracy: ±10 KFixed safety circuit: 550 °CControl accuracy with sensorC-MAG HS 4: -C-MAG HS 7/HS 10: ETS-D5/±0.5 KTop plateMaterial: glass ceramicDimensionsC-MAG HS 4: 100 x 100 mmC-MAG HS 7: 180 x 180 mmC-MAG HS 10: 260 x 260 mm


Weight PK Cat. No.

mm kgC-MAG HS 4C-MAG HS 4 UKC-MAG HS 7C-MAG HS 7 UKC-MAG HS 10C-MAG HS 10 UK

150 x 260 x 105150 x 260 x 105220 x 330 x 105220 x 330 x 105300 x 415 x 105300 x 415 x 105

335566

111111

9.720 4904.008 0879.720 4914.008 0909.720 4924.008 093

1

9.720 490

2

9.720 491

3

9.720 492

Magnetic stirrer C-MAG HS 7 PackageC-MAG HS 7 Package includes: Magnetic stirrer/hotplate C-MAG HS 7, ETS-D5 Electroniccontact thermometer, H 38 Holding rod, H 16 V Support rod and H 44 Bosshead.

4IKA

Type PK Cat. No.

C-MAG HS 7 Package 1 6.235 183

4www.wen

k-lab

tec.co

m

www.wenk-labtec.com

456



E & OE.

Magnetic stirrers C-MAG HS 4 digital/C-MAG HS 7 digital/C-MAG HS 10 digitalMagnetic stirrer with heating and ceramic heating plate which offers excellent chemical resistance.- Powerful motor for stirring quantities of up to 5 l, 10 l or 15 l (H2O)- Simultaneous digital display of target and actual temperatures via LCD display- Directly connection for a PT1000 temperature sensor enable a precise temperature control (included in delivery)- Control accuracy in medium ±0.5 K (in combination with PT1000)- Display of actual temperature value in medium with 0.1 K resolution when using PT1000 temperature sensor- 3 operating modes to choose (standard, safe, adjustment protection)- Fixed safety circuit of 550 °C- Hot Top indicator: hot surface warning to prevent burns!- Digital error code display- Elevated control panel for protection against leaking liquids

1

2

3

IKA

SpecificationsMagnetic driveMax. stirring quantity (H2O)C-MAG HS 4: 5 lC-MAG HS 7: 10 lC-MAG HS 10: 15 lMotor rating input/output: 15/1.5 WSpeed range: 100 to 1500 rpmSpeed display: ScaleMax. stirring bar lengthC-MAG HS 4: 30 mmC-MAG HS 7/HS 10: 80 mmHeating functionHeat output:C-MAG HS 4: 250 WC-MAG HS 7: 1000 WC-MAG HS 10: 1500 WHeating rate (1l H2O):C-MAG HS 4: 2.5 K/minC-MAG HS 7/HS 10: 5 K/minTemperature range min./max. 50 to 500 °CSetting accuracy: ±1 KTemperature display: LCDSafety circuit fixed: 550 °CConnection for ext. temp. sensor: DIN 12878Control accuracy with sensor: ±0.5 KSet-up plateMaterial: ceramicDimensionsC-MAG HS 4: 100 x 100 mmC-MAG HS 7: 180 x 180 mmC-MAG HS 10: 260 x 260 mmProtection class acc. to DIN EN 60529: IP 21Power supply: 230 V, 50/60 Hz


Weight PK Cat. No.

mm kgC-MAG HS 4 digitalC-MAG HS 4 digital S 2 UKC-MAG HS 4 digital S 3 CHC-MAG HS 7 digitalC-MAG HS 7 digital S 2 UKC-MAG HS 7 digital S 3 CHC-MAG HS 10 digitalC-MAG HS 10 digital S 2 UKC-MAG HS 10 digital S 3 CH

150 x 260 x 105150 x 260 x 105150 x 260 x 105215 x 330 x 105215 x 330 x 105215 x 330 x 105300 x 415 x 105300 x 415 x 105300 x 415 x 105

333555666

111111111

9.720 4419.720 4429.720 4479.720 4439.720 4449.720 4489.720 4459.720 4469.720 449

1

9.720 441

2

9.720 443

3

9.720 445

www.wen

k-lab

tec.co

m

www.wenk-labtec.com

457



E & OE.

Magnetic stirrer RET® control-visc with heating and integrated balance

Safety magnetic stirrer with heating and integrated balance. Clear, multilingual TFT displaymakes it easy to set all parameters. Integrated temperature control feature enablesconnection of a temperature probe, placed directly in the medium, to control medium temperature with a high degreeof precision. PT 1000 temperature sensor is included with purchase of RET control. The stainless steel composite hotplate, reaching a temperature of 340 °C, enables rapid heating. RS 232 and USB interfaces enable pc control of themagnetic stirrer and documentation of all test parameters. "Lock" function prevents inadvertent changes of speed andtemperature settings. As a safety feature, "HOT" sign flashes when the unit is switched off but surface is still hot.

RET® control-visc white with chemically resistant hot plate.

- BNC socket for connection of a pH electrode- Adjustable temperature control mode: rapid heating and very accurate temperature control- Dual sensor for simultaneous control of heat transfer fluid temperature and medium temperature- Timer and countdown functions- Display of viscosity change trend- Detached magnet detection- Intermittent operation- Several modes of operation available- Safety circuit adjustable from 50 to 380 °C- Transparent protective cover included- Error code display for easy troubleshooting- Exact temperature and speed adjustment by means of digital display; even when function switched off- Digital display of the safety temperature limit- Suitable for unsupervised operation- Sealed casing (IP 42) ensures a long service life

1

IKA

SpecificationsMax. stirring quantity (H2O): 20 lMotor rating input/output: 22/12 WSpeed: 50 to 1700 rpmSpeed display: TFTHeat output: 600 WHeating rate (1l H2O): 7 K/minTemperature range min./max. RT to 340 °CSetting accuracy: ±0.1 KAdjustable safety circuit min./max.: 50 to 380 °CConnection for ext. temp. sensor: DIN 12878Control accuracy with sensor: ±0.2 KInterface: USB/RS 232Weighing range: 10 to 5000 gWeighing accuracy: < 500 g : ±1 g , > 500 g: ±5 gSet-up plate: Stainless steel 1.4301, diam. 135 mmDimensions (W x D x H): 160 x 270 x 85 mmWeight: 3 kgProtection class acc. to DIN EN 60529: IP 42Power supply: 220-240 V, 50/60 Hz

Type PK Cat. No.

RET® control-viscRET® control-visc S 2 UKRET® control-visc S 3 CHRET® control-visc whiteRET® control-visc white S 2 UKRET® control-visc white S 3 CH

111111

9.720 2619.720 2629.720 2639.720 2319.720 2329.720 233

1

Overall accessories for IKA magnetic stirrersIKA

Type Formodel


PT 1000.60PT 1000.70H 104H 29H 30labworldsoft® V5

RCT basicRCT basicRET controlRET, RCTRET, RCTRET, RCT

Temperature sensorTemperature sensor, glass-coatedProtective coverOil bath attachment, i. d. : 136 - 180 mm, H: 81 mm, Vol. : 1 lOil bath attachment, i.d. : 136 - 190 mm, H: 110 mm, Vol. : 1.5 lSoftware for control and data collection

111111

6.229 7026.231 2839.910 3387.017 7967.017 7979.910 319

www.wen

k-lab

tec.co

m

www.wenk-labtec.com

458



E & OE.

Electronic Contact thermometer ETS-D5/ETS-D63 possible operation modes guarantee optimum adjustment to your application:

Operating mode A: Suitable for work with varying parameters (from -50 °C to 450 °C). Adjustable safety temperature

Operating mode B: Suitable for repeated operation under uniform conditions and parameters

Operating mode C: Suitable for unsupervised operation- with optimised PID control- reset function- includes stainless steel sensor probe H 62.51- for all magnetic stirrers with a DIN 12878 class 2 contact thermometer connection, e.g. IKA®, Heidolph and Corning with adapter AD-C1.

ETS-D6 additionally with integrated pH measuring instrument (without pH electrode) and large, graphic LCD display with multilingual user guide.

12

IKA

SpecificationsTemperatureMeasuring range: -50 to 450 °CResolution: ±0.1 KAccuracy*: ±0.2 KControl accuracy: 0.1 KControl accuracy (with sensor) ±0.5 KVoltage: 8 to 16 V d.c.Current (at 9V) 15 mAConnection: DIN 12878 Class 2Operating range: 0 to 60 °CMax. R.H.: 80 %Protection class: IP 54Connector: 6-pole, DIN 45322Weight: 0.2 kgTested to DIN EN IEC 61010-1.


PK Cat. No.

mmETS-D5ETS-D6

82 x 22 x 8396 x 45 x 98

11

9.720 2419.720 242

Dimensions without sensor.*Sensor: PT1000 DIN IEC 751 Class A

1

9.720 241

2

9.720 242

Accessories for ETS-D5/ETS-D6 contact thermometerIKA


H 44H 16 VH 62.51H 66.51H 70H 11H 38

BossheadStainless steel support rodReplacement sensor, stainless steelStainless steel sensor, glass sleevedExtension cable, 1 metreReplacement power cableHolding rod

1111111

9.232 9949.720 2579.232 9989.232 9999.233 0009.720 2769.232 996

www.wen

k-lab

tec.co

m

www.wenk-labtec.com

459



E & OE.

Magnetic stirrer with heating, 3-Position, SB162-3With 3 independently adjustable aluminium hotplates, Overheat protection mechanism andwarning light which switches on when the plate temperature exceeds 50 °C. With facility formounting a 12.5 mm retort rod at the rear of each plate and 3 mm x 25 mm PTFE coated followers.

With BioCote, silver-based, antimicrobial protection.

1Stuart

SpecificationsMax. stirring quantity (H2O): 15 lSpeed range: 100 - 1500 rpmHeat output: 3 x 700 WMax. plate temperature: 325 °CSet-up plate: AL/Si alloy, 3 x 160 x 160 mmDimensions (W x D x H): 600 x 270 x 110 mmWeight: 11 kgPower supply: 230 V, 50 HzProtection class: IP 32


PK Cat. No.

SB162-3 3 1 9.950 424

1

Magnetic stirrers/hotplates, multi-position, RT 5/10/15Digital magnetic hotplate stirrers with 5, 10 or 15 positions, designed for synchronousheating and stirring. The magnetic coil technology provides noiseless and consistentstirring on all positions. The surface temperature is infinitely adjustable up to 120 °C, producing a maximummedium temperature of 70 °C (depending on type of vessel). Speed remains constant, even when load changes.

- Homogeneous temperature distribution across heating plate- Adjustable reverse operation- Eco-mode for a low self-warming of the surface- Wear free magnetic coils- Error code display- Easy operation with touch keypad- Suitable for continuous operation- Adjustable speed in increments of 10 rpm

2

3

IKA

SpecificationsMax. stirring quantity per stirring position (H2O): 0.4 lDistance between stirring places: 90 mmDeviation for individual stirring positions: 0 %Speed range: 0 to 1000 rpmHeating rate (1 l H2O in H15): 3 K/minTemperature range heatig plate: RT to 120 °CMax. temperature medium (dep. on vessel): 70 °CTemperature display: LEDHeat control accuracy: ±1 KSpeed display: LED lineSet-up plate material: aluminium alloyProtection class acc. to DIN EN 60529: IP 40Power supply: 100-240 V, 50/60 Hz


DimensionsSet-up plate(W x D)

Stirring positions

Heatingpower

PK Cat. No.

mm mm WRT 5RT 5 S 2 UKRT 5 S 3 CHRT 10RT 10 S 2 UKRT 10 S 3 CHRT 15RT 15 S 2 UKRT 15 S 3 CH

120 x 610 x 60120 x 610 x 60120 x 610 x 60190 x 610 x 60190 x 610 x 60190 x 610 x 60280 x 610 x 60280 x 610 x 60280 x 610 x 60

110 x 495110 x 495110 x 495180 x 495180 x 495180 x 495270 x 495270 x 495270 x 495

555101010151515

175175175375375375580580580

111111111

9.720 6039.720 6049.720 6059.720 6069.720 6079.720 6089.720 6099.720 6109.720 611

2

9.720 603

3

9.720 609

www.wen

k-lab

tec.co

m

www.wenk-labtec.com

460

4. Stirring, Shaking, MixingMagnetic stirrers / Hotplates/With heating and induction


E & OE.

Heated magnetic stirrer hotMIX 1 with internal controlPrice-optimized magnetic stirrer, 100 % maintenance-free and wear-free by inductive 2mag magnetic driveconcept for mixing of solutions, speed range from 100 rpm up to 1600 rpm, jerk-free stirring even at lowspeeds. SoftStart for reliable catching/centering and safe accelerating of the stirring bar, resistant stainless steelhousing for fast and easy cleaning, spill-over protection, extremely robust construction. Hot plate made from resistantaluminium alloy, max. heating temperature +200 °C, socket for contact thermometer (accessory), warning-LED in caseof hot plate, 3 integrated over temperature protection loops against overheating.

12mag

SpecificationsOperating conditions: -10 °C to +40 °C at 80 % R.H. max.Casing: Stainless steelProtection category: IP 20

1



Rotationspeed

Hot-plate


ml mm rpm mm W kghotMIX 1 1 to 2000 120 x 140 x 80 100 to 1600 aluminum 10 2.0 1 6.238 077

Multiple stirring hotplate 2mag STIRRING HOTPLATE 6/15Stirring - Powerful 15 stirring points, maintenance-free and wear-free by 2maginductive drive, extremely wide speed range of 100 rpm to 2.000 rpm, 100 %synchronized speed, jerk-free stirring even at low speeds, 10-step power settings of the stirrer, high power setting forviscous liquids and reduced power setting for long-term operation without any heating effects caused by the stirrer,clear digital display for settings of stirrer speed, stirrer power and temperature of the integrated heater, SoftStartprocedure for reliable catching/centering and safe acceleration of the stirring bar.

Heating - Heating plate made of resistant aluminium alloy, PTFE-coated for increased chemical resistance and easiercleaning, fast heating-up by powerful integrated electrical heater, homogenous temperature distribution, maximumheating temperature +200 °C, Power Detect for automatic compensation of physically determined loss in stirring powerwhich can come up to 40 % at high temperatures, independent over-temperature protection inside the plate.

2mag2

9.646 051

2


Stirringcapacity


Stirring positions

Weight PK Cat. No.

mm ml mm kgHOTPLATE 6HOTPLATE 15

250 x 430 x 75250 x 430 x 75

1 to 1.5001 to 1.000

13065

615

15.015.0

11

9.646 0509.646 051

Multiple stirring heating blocks, STIRRING DRYBATHFor viscosity measurements, R&D, combinatorial chemistry, biological applications,testing the solution behaviour of synthetic materials, quality control in food, chemicaland waste water technology, simple and easy system integration.

Stirring - Maintenance-free and wear-free by 2mag inductive drive, extremely wide speed range of 100 rpm to 2.000 rpm, 100 % synchronized speed, jerk-free stirring even at low speeds, 10-step power settings of the stirrer, highpower setting for viscous liquids and reduced power setting for long-term operation without any heating effects causedby the stirrer, clear digital display for settings of stirrer speed, stirrer power and temperature of the integrated heater,SoftStart procedure for reliable catching/centering and safe acceleration of the stirring bar.

Heating - Massive heating block made of resistant aluminium alloy, PTFE-coated for increased chemical resistance andeasier cleaning, lowest possible temperature gradient inside the stirring vessels, integrated electrical heater, maximumheating temperature +200 °C, PowerDetect for automatic compensation of physically determined loss in stirring powerwhich can come up to 40 % at high temperatures.

32mag

3



Block hole Diam. x depth

Stirringcapacity


Weight PK Cat. No.

mm mm ml mm kgDRYBATH 15-100DRYBATH 15-250DRYBATH 8-250 ERL

15158

6584100

55,7/4871,5/7887,2/78

1 - 1501 - 4001 - 250

280 x 430 x 120335 x 515 x 150345 x 525 x 140

27.035.038.0

111

9.646 0529.646 0539.646 025

www.wen

k-lab

tec.co

m

www.wenk-labtec.com

461

4. Stirring, Shaking, MixingMagnetic stirrers / Hotplates/Accessories, Magnetic stirring bars


E & OE.

LLG-Universal reaction block system for magnetic stirrers

Universal alternative to oil bathThe reaction block allows syntheses to be carried out in round flasks at temperatures of up to 250 °C. As a result, with this system, oil as a heat transfer mediais made redundant and your lab is a safer place. The reaction block ensures safety at work and prevents oil baths and heating mantles from overheating in yourlab. The messy oil clean-ups that results from changing oil or removing flasks from an oil bath will be eliminated. Injuries and burns from hot oil will neverhappen again. Uniform mixing is also guaranteed because there is no interference to the magnetic field from the aluminium blocks. This system ensures optimalheat transfer from the heating plate directly into the medium.

- Universal model- For round plates of 135 to 145 mm diameter- With adapter plate for all square plates of min. 145 mm length side

- Reaction blocks are available in six standard sizes.- Delivered adapter allows the use with either IKA or Heidolph magnetic stirrers.- Syntheses in round flasks without oil bath up to 250 °C.- Uniform and constant mixing- High-precision thermal conduction directly into the reaction block- Safe and clean working- Made in Germany

1 2 3


LLG-Universal reaction block system 50 mlLLG-Universal reaction block system 100 mlLLG-Universal reaction block system 250 mlLLG-Universal reaction block system 500 mlLLG-Universal reaction block system 1000 mlLLG-Universal reaction block system 2000 mlSpare adapter ring for reduction from 145 mm to 135 mm, for attachment 50 to 500 mlSpare adapter ring for reduction from 145 mm to 135 mm, for attachment 1000 and 2000 mlAdapter plate for rectangular hotplates, for attachment 50 to 500 mlAdapter plate for rectangular hotplates, for attachment 1000 and 2000 ml2 spare screws and 1 wrench, for attachment 50 to 500 ml2 spare screws (countersunk), for attachment 1000 and 2000 ml

111111111111

9.728 8909.728 8919.728 8929.728 8939.728 8979.728 8989.728 8949.728 8999.728 8959.728 9009.728 8969.728 901

1 2 3

Safety cover for LLG-Universal reaction block system for magnetic stirrers

Safety cover for LLG-Reaction block system to protect against broken glass and for heat insulation.

4 5

For PK Cat. No.

Round flask attachement 250 mlRound flask attachement 500 mlRound flask attachement 1000 mlRound flask attachement 2000 ml

1111

9.728 8859.728 8869.728 8879.728 902

4

5

www.wen

k-lab

tec.co

m

www.wenk-labtec.com

462



E & OE.

LLG-Magnetic stirring bars, cylindrical, PTFE, eco packCircular, smooth and PTFE-coated. Packaging size: 10 pieces

1


1012152025253035404550607080

1010101010101010101010101010

9.198 9109.198 7669.198 9199.198 9209.198 9259.198 7679.198 9309.198 9359.198 9409.198 9459.198 9509.198 9609.198 9709.198 980

1

Magnetic stirring bar behrotest, set 1 + 2Magnetic stirring bars behrotest ®, Set 1 in a transparent box with hinged lidConsisting of: 2x 20 x 6 mm, 2x 25 x 6mm, 2x 30 x 6 mm, 2x 40 x 8 mm, 1x 50 x 8 mm, 1x 60 x 9 mm

Magnetic stirring bars behrotest®, Set 2 in a transparent box with hinged lid including magnetic stirring barretriever, length 245 mmConsisting of: 1x 15 x 6 mm, 2x 20 x 6 mm, 2x 25 x 6mm, 1x 30 x 6 mm, 2x 40 x 8 mm, 1x 50 x 8 mm, 1x 60 x 9 mm

2

behr


Set 1Set 2

11

6.267 3176.267 318

2

6.267 317

Magnetic stirring bars, cylindrical, PTFEPTFE-coated. Cylindrical. Round, smooth surface. Versatile. Autoclavable. Further sizes available on request.

3BRAND

Diam. Length PK Cat. No.mm mm2.53.52.03.02.03.03.06.04.53.06.04.56.06.06.06.08.08.08.09.09.09.0

2.53.55.06.07.08.0

10.010.012.013.015.015.020.025.030.035.040.045.050.060.070.080.0

1111111111111111111111

9.197 5029.197 5059.197 5039.197 5069.197 5049.197 5099.197 5079.197 5109.197 5129.197 5089.197 5159.197 5149.197 5209.197 5259.197 5309.197 5359.197 5409.197 5459.197 5509.197 5609.197 5709.197 580

3

Magnetic stirring bars, triangular, PTFETriangular. PTFE-coated. Wedge-shaped, ideal for dissolving solids and re-suspendingsediments due to scraping action. Angular surface produces high turbulence, even at lowstirring speeds.

4BRAND


25253540505580

1111111

9.197 6527.019 6727.019 6739.197 6547.019 6759.197 6559.197 658

4www.wen

k-lab

tec.co

m

www.wenk-labtec.com

463



E & OE.

Magnetic stirring bars ASTEROID, triangular, PTFE

More than 4x higher torque transmissible. Unbeatably enhanced mixing effect in comparison to conventional stirring bars. Strong, stable, long-lasting magnetic field, with nodemagnetization effect. Concave design for minimal surface contact and reliable rotation, triangular shape for powerfulshear force and enhanced mixing at lower rotational speeds. Significantly higher rotation speeds achievable, highquality, even and sealed PTFE encapsulation. Conform to FDA requirements, steam sterilisable at 121 °C. Multipleenhancements against all types of magnetic stirrers.

1

2mag


254070

111

9.646 0579.646 0409.646 058

1

Magnetic stirring bars SATELLITE 70/140Stirring Bar SATELLITE 70Extremely strong, abrasion-free and wear-free magnetic stirring bar, bearing on a tripod-construction, especially for the use in stainless steel vessels and in the case of media containing abrasive particles, e.g.sand or sediments, no direct contact between stirring bar and reaction vessel, therefore steady firm, wear-free,chemical resistance comparable to PTFE, recommended magnetic stirrers: 2mag MIX 1 XL and MIXdrive 1 XL.

Stirring Bar SATELLITE 140Identical to SATELLITE 70, but for larger volumes/vessels, recommended magnetic stirrers: 2mag maxMIX, MAXdrive,FABdrive.

23

2mag

Specifications SATELLITE 70/140Shape: round, tripodMaterial (cover): PTFE/ZEDEXNumber of bars: 2/1Dimension bar (D x L): Ø 13 x 70 mm/Ø 32 x 140 mmDimension tripod: Ø 99 mm/Ø 227 mmWeight: 0.1 kg/0.4 kg

Type PK Cat. No.

SATELLITE 70SATELLITE 140

11

9.646 0326.263 848

2

9.646 032

3

6.263 848

Magnetic stirring bar, octagonal, PTFE- Interrupted profile provides greater surface area and added turbulence when compared to

the smooth surface of cylindrical bars- Pivot ring aids in reducing friction and chattering- PTFE encapsulated Alnico magnet- Autoclavable

4Bel-Art Products


12.715.922.225.428.638.150.8

1111111

9.197 4609.197 4619.197 4629.197 4639.197 4649.197 4659.197 466

4

Magnetic stirring bars, dumbbell, PTFEPTFE-coated. Dumbbell-shaped. Excellent centring, low surface contact and highturbulence even at low stirring speeds, ends 20 mm diameter. Stem diameter 8 mm.

5BRAND

Length PK Cat. No.mm3755

11

9.197 6439.197 645

5www.wen

k-lab

tec.co

m

www.wenk-labtec.com

464



E & OE.

Magnetic stirring bars, oval, PTFEEncapsulated in PTFE. Oval. Ideal for round bottom flasks.

1BOLA


202530354050

111111

9.197 5909.197 5919.197 5929.197 5939.197 5949.197 595

1

LLG-Magnetic Stirring Bar Retrievers, PTFE

PTFE-encapsulated stirring bar retriever with strong permanent magnet (Alnico 5), universal chemical resistance. For the removal of stirring bars from aggressive liquids, prevents loss of stirring bars. Lower end diameter 10 mm.

2


150250300350

1111

9.197 7179.197 7254.008 5019.197 735

2

www.wen

k-lab

tec.co

m

www.wenk-labtec.com

Overhead Stirrers OverviewMax. stirring

quantity (H2O)

(l)

Rotation speed

(rpm)

Max. torque at stirring shaft

(Ncm)

Max. viscosity

(mPas)

Chuck range

(mm)

IP class Product Cat. No. Page

15 30-2000 20 10000 0,5-10 IP42 EUROSTAR 20 digital, IKA 9.816 691 46720 50-2200 40 10000 0,5-10 IP21 LLG-uniSTIRRER OH2 6.263 455 46620 60-2000 150 10000 0,5-10 IP20 RW 20 digital, IKA 9.816 622 472

20 150-6000 20 10000 fixed IP40 EUROSTAR 20 high speed digital, IKA 9.816 694 467

20 150-6000 20 10000 fixed IP40 EUROSTAR 20 high speed control, IKA 6.265 592 468

25 30-2000 40 30000 0,5-10 IP43 EUROSTAR 40 digital, IKA 9.816 697 46840 30-2000 60 50000 0,5-10 IP42 EUROSTAR 60 digital, IKA 9.816 700 46940 30-2000 60 50000 0,5-10 IP40 EUROSTAR 60 control, IKA 9.816 703 46980 60-1680 900 50000 1-10 IP40 RW 28 digital, IKA 9.816 630 473100 4-530 660 150000 0,5-10 IP40 EUROSTAR 200 control P4, IKA 9.816 712 472100 6-2000 200 100000 0,5-10 IP40 EUROSTAR 200 digital, IKA 9.816 715 471100 6-2000 200 100000 0,5-10 IP40 EUROSTAR 200 control, IKA 9.816 718 471100 30-1300 100 70000 0,5-10 IP42 EUROSTAR 100 digital, IKA 9.816 706 470100 30-1300 100 70000 0,5-10 IP40 EUROSTAR 100 control, IKA 9.816 709 470200 57-1300 3 000 100000 3-16 IP54 RW 47 digital, IKA 9.816 633 473

465

4. Stirring, Shaking, MixingOverhead stirrers overview


E & OE.

www.wen

k-lab

tec.co

m

www.wenk-labtec.com

466

4. Stirring, Shaking, MixingOverhead stirrers/Instruments


E & OE.

Overhead stirrer LLG-uniSTIRRER OH2, digitalCost efficient laboratory stirrer designed for simple stirring tasks for quantities up to 20 l (H2O). Automatic speed adjustment in the range between 50 and 2200 rpm via microprocessor controlled technology. Safety circuits ensure automatic cut-off in an anti-stall or overload situations. Actual and set speed are constantlydetected ensuring no undesired speed variations even if the sample viscosity changes.

- Brushless, maintenance free motor- Digital speed display- Display for speed or torque changeable- Infinitely adjustable speed- Overload protection- Slim casing- Quiet operation- Error code display- RS232 port

Stand:Stainless steel stand incl. boss head, dimension (W x D x H): 200 x 310 x 780 mm

Stirrer:4-blade propeller stirrer, stainless steel, shaft length 400 mm, stirrer diameter 50 mm

Scope of delivery: Overhead stirrer LLG-uniSTIRRER OH2, stand and 4-blade-propeller stirrer.

1 2

SpecificationsMax. stirring quantity (H2O): 20 lSpeed range: 50 to 2200 rpmMax. viscosity: 10.000 mPasMotor rating input/output: 60/50 WSpeed display accuracy: 3 rpmMax. torque at stirring shaft: 40 NcmDisplay: LCDChuck range: 0.5 to 10 mmDimensions (W x D x H): 83 x 186 x 220 mmPower supply: 110-240 V, 50/60 HzProtection class: IP 21Warranty: 3 years

1

2

Type PK Cat. No.

LLG-uniSTIRRER OH2 with EU-plugLLG-uniSTIRRER OH2 with UK-plug4-blade propeller stirrer, diam. 50, shaft diam. 8, 400 mm2-blade propeller stirrer, diam. 60, shaft diam. 8, 400 mm3-hole paddle stirrer, diam. 67, shaft diam. 8, 400 mm2-blade centrifugal stirrer, diam. 80, shaft diam. 8, 400 mm

111111

6.263 4556.263 4566.263 4546.263 4576.263 4586.263 459

www.wen

k-lab

tec.co

m

www.wenk-labtec.com

467



E & OE.

Overhead stirrer EUROSTAR 20 digitalLaboratory stirrer designed for simple stirring tasks for quantities up to 15 l (H2O). It automatically adjusts the speed through microprocessor controlled technology within thespeed range of 0/30 to 2000 rpm. Safety circuits installed ensures automatic cut-off in an anti-stall or overloadconditions. Continuous comparison of shaft speed to desired speed is maintained and variations are adjustedautomatically. This guarantees a constant speed even with changes in viscosities of the sample.- Digital speed display- Infinitely adjustable speed- Push-through agitator shafts- Overload protection- Short-term overload operation

1IKA

SpecificationsStirring quantity max. (H2O): 15 lMax. viscosity: 10000 mPasMotor rating input/output: 70/42 WSpeed range: 0/30 to 2000 rpmMax. torque at stirring shaft: 20 NcmDisplay: LEDChuck range: 0.5 to 10 mmDimensions (W x D x H): 86 x 208 x 248 mmWeight: 4.4 kgProtection class DIN EN 60529: IP 42Power supply: 230 V, 50/60 Hz

Type PK Cat. No.

EUROSTAR 20 digitalEUROSTAR 20 digital S 2 UKEUROSTAR 20 digital S 3 CH

111

9.816 6919.816 6929.816 693

1

Overhead stirrer EUROSTAR 20 high speed digitalHigh speed laboratory stirrer designed for intensive stirring tasks for quantities up to 20 l (H2O).It automatically adjusts the speed through microprocessor controlled technology within the speedrange of 0/150 to 6000 rpm. Safety circuits installed ensures automatic cut-off in an anti-stall or overload conditions.Continuous comparison of shaft speed to desired speed is maintained and variations are adjusted automatically. Thisguarantees a constant speed even with changes in viscosities of the sample.- Digital speed display- Infinitely adjustable speed- Cone seat for precision shaft- Overload protection- Short-term overload operation

2IKA

SpecificationsStirring quantity max. (H2O): 20 lMax. viscosity: 10000 mPasMotor rating input/output: 176/125 WSpeed range: 0/150 to 6000 rpmMax. torque at stirring shaft: 20 NcmDisplay: LEDChuck range: fixedDimensions (W x D x H): 86 x 208 x 325 mmWeight: 5.3 kgProtection class DIN EN 60529: IP 40Power supply: 230 V, 50/60 Hz

Type PK Cat. No.

EUROSTAR 20 high speed digitalEUROSTAR 20 high speed digital S 2 UKEUROSTAR 20 high speed digital S 3 CH

111

9.816 6949.816 6959.816 696

2

Stirrers for overhead stirrer EUROSTAR 20 high speed digital/control

34

IKA

Type ForVolume

Description Rotor diam.

PK Cat. No.

l mmR 1401R 1405R 1402

1 - 300.25 - 301 - 30

PropellerPropellerDissolver

554542

111

9.197 0549.197 0539.197 055

3

9.197 053

4

9.197 055

www.wen

k-lab

tec.co

m

www.wenk-labtec.com

468



E & OE.

Overhead stirrer EUROSTAR 20 high speed controlHigh speed laboratory stirrer designed with a removable wireless controller and a digitalTFT display. It automatically adjusts the speed through microprocessor controlled technologywithin the speed range of 0/150 - 6000 rpm. The stirrer comes equipped with a RS 232 and a USB interface to controland document all parameters, and an update of the current firmware. An integrated torque trend display is provided forthe measurement of viscosity changes. The included precision stirrer shaft is 280 mm long and has a maximumimmersion depth of 220 mm.

- Multilingual TFT display- Programmable functions- Integrated temperature measurement- Interval operation- Timer function- Adjustable safety circuit- Locked function- Infinitely adjustable speed- Push-through agitator shafts- Overload protection

1IKA

SpecificationsStirring quantity max. (H2O): 20 lMax. viscosity: 10000 mPasMotor rating input/output: 176/125 WSpeed range: 0/150 to 6000 rpmMax. torque at stirring shaft: 20 NcmDisplay: TFTChuck range: special stirrer shaft (incl. in delivery)Dimensions (W x D x H): 86 x 230 x 325 mmWeight: 4.7 kgProtection class DIN EN 60529: IP 40Power supply: 230 V, 50/60 Hz

Type PK Cat. No.

EUROSTAR 20 high speed controlEUROSTAR 20 high speed control S 2 UKEUROSTAR 20 high speed control S 3 CH

111

6.265 5926.265 9006.265 901

1

Overhead stirrer EUROSTAR 40 digitalUniversal laboratory stirrer designed for simple stirring tasks for quantities up to 25 l (H2O).It automatically adjusts the speed through microprocessor controlled technology within thespeed range of 0/30 to 2000 rpm. Safety circuits installed ensures automatic cut-off in an anti-stall or overloadconditions. Continuous comparison of shaft speed to desired speed is maintained and variations are adjustedautomatically. This guarantees a constant speed even with changes in viscosities of the sample.

- Digital speed display- Infinitely adjustable speed- Push-through agitator shafts- Overload protection- Short-term overload operation

2IKA

SpecificationsStirring quantity max. (H2O): 25 lMax. viscosity: 30000 mPasMotor rating input/output: 118/84 WSpeed range: 0/30 to 2000 rpmMax. torque at stirring shaft: 40 NcmDisplay: LEDChuck range: 0.5 to 10 mmDimensions (W x D x H): 86 x 208 x 248 mmWeight: 4.4 kgProtection class DIN EN 60529: IP 42Power supply: 230 V, 50/60 Hz

Type PK Cat. No.

EUROSTAR 40 digitalEUROSTAR 40 digital S 2 UKEUROSTAR 40 digital S 3 CH

111

9.816 6979.816 6989.816 699

2

www.wen

k-lab

tec.co

m

www.wenk-labtec.com

469



E & OE.

Overhead stirrer EUROSTAR 60 digital/60 controlUniversally used strong laboratory stirrer for quantities up to 40 l (H2O). It automatically adjusts the speed through microprocessorcontrolled technology within the speed range of 0/30 to 2000 rpm. Safety circuits installed ensures automatic cut-off in an anti-stallor overload conditions. Continuous comparison of shaft speed to desired speed is maintained and variations are adjusted automatically. This guarantees a constant speed even with changes in viscosities of the sample.

EUROSTAR 60 digital:- Digital speed display- Infinitely adjustable speed- Push-through agitator shafts- Overload protection- Short-term overload operation- Slim casing- Quiet operation- Error code display

EUROSTAR 60 control additionally:- Multilingual TFT display- Programmable functions- Integrated temperature measurement- Interval operation- Timer function- Adjustable safety circuit- Locked function

1

2

IKA

SpecificationsStirring quantity max. (H2O): 40 lMax. viscosity: 50000 mPasMotor rating input/output60 digital: 176/126 W60 control: 168/131 WSpeed range: 0/30 to 2000 rpmMax. torque at stirring shaft: 60 NcmDisplay 60 digital: LEDDisplay 60 control: TFTChuck range: 0.5 to 10 mmDimensions (W x D x H) 60 digital: 86 x 208 x 248 mmDimensions (W x D x H) 60 control: 86 x 230 x 267 mmProtection class DIN EN 6052960 digital: IP 4260 control: IP 40Power supply: 230 V, 50/60 HzEUROSTAR 60 control only:Temperature measurement: PT 1000Temperature measuring range: -10 to +350 °C

Type PK Cat. No.

EUROSTAR 60 digitalEUROSTAR 60 digital S 2 UKEUROSTAR 60 digital S 3 CHEUROSTAR 60 controlEUROSTAR 60 control S 2 UKEUROSTAR 60 control S 3 CH

111111

9.816 7009.816 7019.816 7029.816 7039.816 7049.816 705

1

9.816 700

2

9.816 703

Accessories for the IKA overhead stirrers please see page 475.

www.wen

k-lab

tec.co

m

www.wenk-labtec.com

470



E & OE.

Overhead stirrer EUROSTAR 100 digital/100 controlPowerful laboratory stirrer for highly viscous applications and intensive mixing for quantities up to 100 l (H2O). It automaticallyadjusts the speed through microprocessor controlled technology within the speed range of 0/30 to 1300 rpm. Safety circuits installedensures automatic cut-off in an anti-stall or overload conditions. Continuous comparison of shaft speed to desired speed is maintained and variations areadjusted automatically. This guarantees a constant speed even with changes in viscosities of the sample.


EUROSTAR 100 control additionally:- Multilingual TFT display- Detachable remote control- Programmable functions- Integrated temperature measurement- Interval operation- Reverse function- Timer function- Adjustable safety circuit- Locked function

1

2

IKA

SpecificationsStirring quantity max. (H2O): 100 lMax. viscosity: 70000 mPasMotor rating input/output100 digital: 186/136 W100 control: 174/142 WSpeed range: 0/30 to 1300 rpmMax. torque at stirring shaft: 100 NcmDisplay 100 digital: LEDDisplay 100 control: TFTChuck range: 0.5 to 10 mmDimensions (W x D x H) 100 digital: 86 x 208 x 248 mmDimensions (W x D x H) 100 control: 86 x 230 x 267 mmProtection class DIN EN 60529100 digital: IP 42100 control: IP 40Power supply: 230 V, 50/60 HzEUROSTAR 100 control only:Temperature measurement: PT1000Temperature measuring range: -10 to +350 °C

Type PK Cat. No.


111111

9.816 7069.816 7079.816 7089.816 7099.816 7109.816 711

1

9.816 706

2

9.816 709

www.wen

k-lab

tec.co

m

www.wenk-labtec.com

471



E & OE.

Overhead stirrer EUROSTAR 200 digital/200 controlExtremely powerful laboratory stirrer for highly viscous applications and intensive mixing for quantities up to 100 l (H2O). It automatically adjusts the speed through microprocessor controlled technology within the speed range of 0/6 to 2000 rpm (two speed ranges). Safety circuits installed ensures automatic cut-off in an anti-stall or overload conditions. Continuous comparison of shaft speed to desiredspeed is maintained and variations are adjusted automatically. This guarantees a constant speed even with changes in viscosities of the sample.


EUROSTAR 200 control additionally:- Multilingual TFT display- Detachable remote control- Programmable functions- Integrated temperature measurement- Interval operation- Timer function- Adjustable safety circuit- Locked function

1

2

IKA

SpecificationsStirring quantity max. (H2O): 100 lMax. viscosity: 100000 mPasMotor rating input/output: 130/84 WSpeed range: 6 to 2000 rpmSpeed range I (at 50/60 Hz): 6 to 400 rpmSpeed range II (at 50/60 Hz): 30 to 2000 rpmMax. torque at stirring shaft: 200 NcmDisplay 200 digital: LEDDisplay 200 control: TFTChuck range: 0.5 to 10 mmDimensions (W x D x H) 200 digital: 91 x 209 x 274 mmDimensions (W x D x H) 200 control: 91 x 231 x 274 mmProtection class DIN EN 60529: IP 40Power supply: 230 V, 50/60 HzEUROSTAR 200 control only:Temperature measurement: PT1000Temperature measuring range: -10 to +350 °C

Type PK Cat. No.


111111

9.816 7159.816 7169.816 7179.816 7189.816 7199.816 720

1

9.816 715

2

9.816 718

www.wen

k-lab

tec.co

m

www.wenk-labtec.com

472



E & OE.

Overhead stirrer EUROSTAR 200 control P4Extremely powerful laboratory stirrer for highly viscous applications for quantities up to 100 l (H2O). It is designed with a removable wireless controller and a digital TFT display. Itautomatically adjusts the speed through microprocessor controlled technology within the speed range of 0/4 to 530 rpm(two speed ranges). The stirrer comes equipped with a RS 232 and a USB interface to control and document allparameters. An integrated torque trend display is provided for the measurement of viscosity changes. Safety circuitsinstalled ensures automatic cut-off in an anti-stall or overload conditions. Continuous comparison of shaft speed todesired speed is maintained and variations are adjusted automatically. This guarantees a constant speed even withchanges in viscosities of the sample.

- Multilingual TFT display- Detachable remote control- Programmable functions- Integrated temperature measurement- Interval operation- Timer function- Adjustable safety circuit- Locked function- Infinitely adjustable speed- Overload protection- Short-term overload operation

1IKA

SpecificationsStirring quantity max. (H2O): 100 lMax. viscosity: 150000 mPasMotor rating input/output: 134/76 WSpeed range: 0/4 to 530 rpmSpeed range I (at 50/60 Hz): 0/4 to 110 rpmSpeed range II (at 50/60 Hz): 0/16 to 530 rpmMax. torque at stirring shaft: 660 NcmDisplay TFTChuck range: 0.5 to 10 mmDimensions (W x D x H) 91 x 231 x 379 mmProtection class DIN EN 60529: IP 40Power supply: 230 V, 50/60 Hz

Type PK Cat. No.

EUROSTAR 200 control P4EUROSTAR 200 control P4 S 2 UKEUROSTAR 200 control P4 S 3 CH

111

9.816 7129.816 7139.816 714

1

Overhead stirrer RW 20 digital- Technical improvements on the trusted RW 20 series design, mechanically controlled- with digital display- robust, ergonomic design- constant power-drive- two speed ranges for universal use from 60 rpm to 2000 rpm- hollow-shafted chuck for rotor shaft height adjustment (only when stationary)

2IKA

SpecificationsStirring volume max. (H2O): 20 LViscosity range: up to 10000 mPasMotor rating input/output: 70/35 WOutput max. at stirring shaft: 26 WMax. stirring shaft torque (at 100rpm.): 150 NcmSpeed range I (at 50Hz): 60 to 500 rpm.Speed range II (at 50Hz): 240 to 2000 rpm.Chuck range: 0.5 to 10 mmDiameter/length of extension arm: 13 mm / 160 mmDimensions (W x D x H) 88 x 212 x 294 mmWeight: 3.1 kgProtection class acc. to DIN EN 60529: IP 20Supply requirements: 230 V, 50/60 HzTested to DIN EN IEC 61010-1.

Type PK Cat. No.

RW 20 digitalRW 20 digital UK

11

9.816 6226.227 717

Optional accessories: Stands: R 1825, R 1826, R 1827, R 182 Boss head, FK 1 Flexible coupling, RH 3 Strap clamp, R 301 Stirring shaft protection,Stirring elements: e.g. R 1342, R 1381

2

www.wen

k-lab

tec.co

m

www.wenk-labtec.com

473



E & OE.

Overhead stirrer RW 28 digitalPowerful, mechanically controlled laboratory stirrer designed for highly viscous applicationsfor quantities up to 80 l (H2O). It is suitable for intensive mixing for use in laboratories andpilot plants. The stirrer comes equipped with a protection for overheating of the motor by means of self-lockingtemperature limiter. Additionally, to secure bowls, a stirring shaft protection and clamping fixture are optionallyavailable.- Digital speed display- Infinitely adjustable speed in two speed ranges- Push-through agitator shafts- Overload protection- Error code display- Robust, ergonomic design- Quiet operation- With constant power-drive

1IKA

SpecificationsStirring quantity max. (H2O): 80 lMax. viscosity: 50000 mPasMotor rating input/output: 220/90 WSpeed range (at 50/60 Hz): 60 to 1400 rpm/72 to 1680 rpmSpeed range I (at 50/60 Hz): 60 to 400 rpm/72 to 480 rpmSpeed range II (at 50/60 Hz): 240 to 1400 rpm/288 to 1680 rpmMax. torque at stirring shaft: 900 NcmDisplay: LEDChuck range: 1 to 10 mmDimensions (W x D x H): 123 x 252 x 364 mmProtection class DIN EN 60529: IP 40Power supply: 220-240 V, 50/60 Hz

Type PK Cat. No.

RW 28 digitalRW 28 digital S 2 UKRW 28 digital S 3 CH

111

9.816 6309.816 6319.816 632

1

Overhead stirrer RW 47 digitalUniversal laboratory stirrer designed for simple stirring tasks for quantities up to 200 l (H2O).It automatically adjusts the speed through microprocessor controlled technology within thespeed range of 0/30 to 2000 rpm. Safety circuits installed ensures automatic cut-off in an anti-stall or overloadconditions. Continuous comparison of shaft speed to desired speed is maintained and variations are adjustedautomatically. This guarantees a constant speed even with changes in viscosities of the sample.

- Digital speed display- Infinitely adjustable speed- Push-through agitator shafts- Overload protection- Short-term overload operation- Slim casing- Quiet operation- Error code display

2IKA

SpecificationsStirring quantity max. (H2O): 200 lMax. viscosity: 100000 mPasMotor rating input/output: 513/370 WSpeed range: 57 to 1300 rpmSpeed range I (at 50 Hz): 57 to 275 rpmSpeed range II (at 50 Hz): 275 to 1300 rpmMax. torque at stirring shaft: 3000 NcmDisplay: LEDChuck range: 3 to 16 mmDimensions (W x D x H): 145 x 358 x 465 mmProtection class DIN EN 60529: IP 54Power supply: 3 x 400 V, 50/60 Hz

Type PK Cat. No.

RW 47 digital 1 9.816 633

2

www.wen

k-lab

tec.co

m

www.wenk-labtec.com

474

4. Stirring, Shaking, MixingOverhead stirrers/Stirrer Heads


E & OE.

Flexible clutchRequired for stirring tasks using glass stirring rods. The flexible coupling compensates for any structural variances.

1Buddeberg

Clamping range: 6 to 10 mmTorque max. 10 Ncm

Type PK Cat. No.

FK 1 1 9.197 060

1

Connection couplingsFixed-diameter connection between motor and stirring shaft.Suitable for use in potentially explosive atmospheres (ATEX).Material no. 1.4404

2Buddeberg

Type For PK Cat. No.

VK 7 x 8VK 7 x 10VK 14 x 10VK 14 x 12VK 14 x 14VK 14 x 20

MRKMRKBSR 64 with standBSR 64 with standBSR 64 with standBSR 64 with stand

111111

9.779 0109.779 0086.287 7166.287 7176.287 7189.779 059

2

Magnetic Stirrer Heads P-MRKIdeal stirrer head for PTFE-jacketed stirrer shafts from BOLA. Consisting of capsuled driveshaft (stainless steel) with ball bearings, rotor and lower bearing made of PTFE/PEEK and ahollow shaft made of borosilicate glass. Requires little space due to compact construction. No leakage or memoryeffects due to non-porous, welded rotor. Compression fittings for safe fixing of stirrer shaft and optimum powertransmission. Joint-Cone with nut (Safe-Lab) for easy locking and unlocking of the ground joint. Square size 6 mm foraccepting an agitator or a stirrer coupling. Insertion length of shaft 95mm. Drive shaft outside diameter 50 mm.

- gastight stirrer head for perfect vacuum- stirrer shaft's height adjustable, approx. 40 mm- also suitable for shortened stirrer shafts- powerful transmission of up to 90 Ncm- excellent chemical resistance- all products which are exposed to the medium do not contain any metals- no grease required/save to run dry- high speed of up to max. 1.500 rpm- drive shaft fixed for your safety- high durability- easy disassembly of all parts for cleaning

3BOLA

For diam.stirring rod

Height Joint size PK Cat. No.

mm mm NS81010

145145145

29/3229/3245/40

111

9.197 2059.197 2069.197 207

3

Magnetic stirrer bearing with ground jointStirrer head with a permanent magnetic coupling for mixing applications under vacuum.No straight-through shaft, no shaft sealing rings required as the torque is providedcontactless by magnetic force.

Rotational speed: 2500 rpmMaterial: 1.4435 (AISI 316 L)Seal: VitonBearings: Ball bearing steel

4

5

Buddeberg

Type Joint size Capacity Temp.range

For fluidviscosity

Torque PK Cat. No.

NS ml °C mPa. NcmMRK 1/20MRK 1/40MRK 1/60MRK 1/90MRK 2/20MRK 2/40MRK 2/60MRK 2/90

29/3229/3229/3229/3245/4045/4045/4045/40

500100030005000500

10005000

10000

240240240240240240240240

50015006000

10000500

15006000

10000

2040609020406090

11111111

9.779 2019.779 2029.779 2039.779 2049.779 0629.779 2119.779 2129.779 213

4

9.779 201

5

9.779 062

www.wen

k-lab

tec.co

m

www.wenk-labtec.com

475

4. Stirring, Shaking, MixingOverhead stirrers/Stirrer Heads


E & OE.

Bossheads for overhead stirrers

12

IKA

Type Jawopening

PK Cat. No.

mmR 182R 270R 271

Stand / extension arm: 6 to 16Stand / extension arm: 25 to 36 / 5 to 21Stand / extension arm: 34 / 16

111

9.224 2929.224 2939.224 266

1

9.224 292

2

9.224 293

Strap clamps for overhead stirrers

34

IKA

Type Roddiam.

Vessel diam.

PK Cat. No.

mm mmRH 3RH 5*

8 to 1625 to 36

40 to 30040 to 300

11

9.224 7619.224 762

*with R 270 bosshead

3

9.224 761

4

9.224 762

Stands for overhead stirrers

5

6

IKA

Type Description Roddiam.

Height Max. load

PK Cat. No.

mm mm kgR 1825R 1826R 1827R 2722R 2723R 474R 472

Stand with baseplateStand with baseplateStand with baseplateH-standTelescopic standTelescopic standFloor stand

16161634344880x80

560800

10001010

620 - 1010500 - 1000980 - 1860

555

10103030

1111111

9.224 0319.224 0329.224 0339.224 0269.224 0289.816 7359.816 736

Further stands available on request.

5

9.224 026

6

9.816 735

PLR compressed air laboratory stirrers up to 25 L for use in potentially explosiveatmospheres, without/with tachometer

PLR compressed air laboratory stirrers are designed for all kinds of standard mixing tasks.The vane type, air-driven motor offers a high power density and is significantly lighter andsmaller than an equivalent electric motor.

General specifications:- operating pressure max. 6 bar- air consumption 260 L/min. at 6 bar- power output 200 W at 6 bar- clockwise rotation- ATEX certification

Basic models include:- all-stainless steel housing- continuously adjustable speed control valve- support arm diam. 14 mm- snap connection for NW 5- output shaft L x diam. 26 x 10 mm

9

Buddeberg

7

9.778 950

8

9.778 960

9

7

8

Type Capacitymax.

Off-loadspeed

Loadspeed

Load torque

Torque For fluidviscosity

Rating ATEX certification

PK Cat. No.

litres rpm. rpm. Nm Nm mPa. WPLR 10PLR 11PLR 12PLR 28PLR 13PLR 10T*PLR 11T*PLR 12T*PLR 28T*PLR 13T*

3202525253

20252525

18000180087058080

18000180087058080

820090048029660

820090048029660

0.21.83.15.8

12.00.21.83.15.8

12.0

0.33.55.3

10.419.80.33.55.3

10.419.8

10005000070000

100000150000

10005000070000

100000150000

200200200200200200200200200200

Ex II 2G c T4Ex II 2G c T5Ex II 2G c T5Ex II 2G c T5Ex II 2G c T5Ex II 2G c T4Ex II 2G c T5Ex II 2G c T5Ex II 2G c T5Ex II 2G c T5

1111111111

9.778 9509.778 9519.778 9529.778 9549.778 9539.778 9609.778 9619.778 9629.778 9649.778 963

* analogue tachometerThe viscosity data are intended as a guideline.

www.wen

k-lab

tec.co

m

www.wenk-labtec.com

476

4. Stirring, Shaking, MixingOverhead stirrers/Stirrers


E & OE.

Compressed air industrial stirrers BSR 64 with floor standBSR series stirrers perform routine mixing tasks up to 200 l, mounted on a floor stand.

General specifications:- operating pressure max. 6 bar- air consumption 800 l/min. at 6 bar- power output 640 W at 6 bar- clockwise rotation- ATEX rating to EX II 2G c T5

Basic models include:- all-stainless steel housing- continuously adjustable speed control valve- spherical clamping device with support arm diam. 16 mm, length 200 mm- floor stand with rod (height 1000 mm, width 600 mm) and bosshead- clip connector- silencer- output shaft L 32 mm x diam. 14 mm

1Buddeberg

1

Type Capacitymax.

Off-loadspeed

Loadspeed

Load torque

For fluidviscosity

Rating PK Cat. No.

litres rpm. rpm. Nm mPa. WBSR64/160-VBSR64/65-VBSR64/30-V

200200200

26001300580

1300650290

4.79.4

21.0

2000050000

100000

640640640

111

9.779 1639.779 1649.779 165

Compressed air powered stirrers, PLR, accessoriesConnection couplings VK:Fixed-diameter connection for motor/magnetic coupling drive shaft and stirring rod.Suitable for use in potentially explosive atmospheres. Material No. 1.4404.

Flexible glass stirring shaft couplings PK:For stirring tasks using glass stirring rods. Elastic connector between motor and stirring shaft. Provides exact alignmentof motor and shaft, and evens out axial and height differences. Accepts 6mm to 10 mm diameter shafts.

Flexible glass stirring shaft couplings K:For stirring tasks using glass stirring rods. Elastic connector between motor and stirring shaft. Provides exact alignmentof motor and shaft, and evens out axial and height differences. Output drive accepts 6 mm to 10 mm diameter shafts,input shaft receiver fits 10 mm or 10/13 mm diameter drives, secured by allen screws.

Double-Cardan-Coupling DCK I:With 8mm dia. hexagonal input drive receiver and 6mm square socket drive output.

2

3

4

Buddeberg


VKVKPK 10PK 10/13K 10K 10/13DCK I

Connection couplings 10 x 8 mmConnection couplings 10 x 10 mmFlex coupling receiver i. d. 10 mmFlex coupling receiver i. d. 10/13 mmFlex coupling receiver i. d. 10 mmFlex coupling receiver i. d. 10/13 mmStainless steel, L = 110 mm

1111111

6.286 4266.285 8349.779 0139.779 0149.198 0109.197 4009.779 065

2

9.198 010

3

9.779 013

4

9.779 065

StandsFloor stand BSwith angled foot, side length 600 mm, rod diam. 34 mm.

Wall bracket WSRod diam. 34 mm, clearance from wall: 200 mm.

5

6

Buddeberg

Type Description Length PK Cat. No.mm

BS 1BS 2WS

Floor standFloor standWall bracket

100015001000

111

9.224 0006.206 3486.225 791

5

9.224 000

6

6.225 791

www.wen

k-lab

tec.co

m

www.wenk-labtec.com

477



E & OE.

Propeller stirring rotors, 3-blade, stainless steel 1.4305The 3-blade propellers produce axial flow, and reduce shear forces to a minimum, even at high stirring speeds, thanksto their optimised blade design. Recommended for medium to high speed operations.Other sizes available on request.

1 2

Øagitator

Ø agitatorshaft

Length PK Cat. No.

mm mm mm4555140140

88

1010

350350550800

1111

9.197 0219.197 0229.197 0239.197 024

1 2

Diagonal blade stirring rotors, 4-blade, stainless steel 1.4305

The 4-blade diagonal blade stirring rotor provides axial flow and creates increasing shear forces at higher stirringspeeds. Recommended for medium to high speed operations. Other sizes available on request.

3 4

Øagitator

Ø agitatorshaft

Length PK Cat. No.

mm mm mm50100100

88

10

350350550

111

9.197 0069.197 0099.779 320

3 4

Turbine stirring rotors, 3-blade with guide ring, stainless steel 1.4305

The 3-blade turbine stirring rotor produces radial flow; the guide ring surrounding the blades reduces shear forces, andoffers protection when contacting the wall or bottom of the vessel. Recommended for medium to high speed operations.

5 6

Øagitator

Ø agitatorshaft

Length PK Cat. No.

mm mm mm305070

88

10

350350400

111

9.197 0309.197 0319.197 032

5 6

Double blade stirring rotors, stainless steel 1.4404The double blade rotor creates two counter-currents. Vortices are prevented. Recommended for medium to high speedoperations. Other sizes available on request.

7

Øagitator

Ø agitatorshaft

Length PK Cat. No.

mm mm mm6080

88

500500

11

6.203 0959.779 321

7

Dissolver stirring rotors, stainless steel 1.4404The dissolver stirring rotor creates a radial flow with high turbulence. The mixture is drawn from top to bottom. Highshear forces are created at the dissolver disk, which provides effective particle reduction. Recommended for medium tohigh speed operations.

8 9

Øagitator

Ø agitatorshaft

Length PK Cat. No.

mm mm mm30405060708080100

8888888

10

350350550550550350550350

11111111

9.779 3229.197 0079.779 3236.050 9159.779 3249.197 0019.779 3259.197 003

8 9www.wen

k-lab

tec.co

m

www.wenk-labtec.com

478



E & OE.

Centrifugal stirring rotors, 2-blade, stainless steel 1.4305

The folding blades of this 2-blade centrifugal stirring rotor open with increasing speed, allowing use with narrow-neckvessels. The stirring effect it provides is similar to a standard diagonal blade stirring rotor. Recommended for mediumto high speed operations.

1 2

Ø agitatoropen / closed

Ø agitatorshaft

Length PK Cat. No.

mm mm mm60/15100/24

88

350550

11

9.197 0119.197 013

1 2

Moebius stirrer, stainless steel 1.4571Generates axial flow. For drawing the material to be mixed from above. For circulating andhandling low to medium viscous liquids. Recommended for medium speed operations.

3 4IKA

Type Øagitator

Ø agitatorshaft

Length PK Cat. No.

mm mm mmR 3000.1R 3001.1

100100

1010

565575

11

6.265 5936.265 594

3 4

Spiral stirrer, stainless steel 1.4571Generates axial flow. Medium is conveyed from the bottom upwards. For homogeneousmixing and heat exchange of medium to high viscosity media. Recommended for mediumspeed operations.

5 6IKA

Type Øagitator

Ø agitatorshaft

Length PK Cat. No.

mm mm mmR 3003R 3003.1R 3003.2

50100150

81010

350550800

111

6.265 5956.265 5966.265 597

5 6

Blade stirrer, stainless steel 1.4571Generates a radial flow. For drawing the material to be mixed from the top and bottom.For aerating of low viscosity media and for homogenizing solids in liquids. Used at medium tohigh speeds.

7 8IKA

Type Øagitator

Ø agitatorshaft

Length PK Cat. No.

mm mm mmR 3004R 3004.1R 3004.2

305070

81010

359565819

111

6.265 5986.265 5996.265 700

7 8

Paddle stirring rotors, 6 holes, stainless steel 1.4305

The paddle stirring rotor creates a tangential flow with minimum turbulence. Its design ensures a gentle action onsensitive products and good heat exchange. Recommended for low to medium speed operations.Other sizes available on request.

9 10

Øagitator

Ø agitatorshaft

Length PK Cat. No.

mm mm mm70150

810

350550

11

9.197 0199.197 020

9 10

Anchor stirring rotors, stainless steel 1.4305The anchor-shape rotor creates a tangential flow and high shear forces between the vessel wall and stirring blades. This stirrer is especially suitable for medium to high viscosity fluids. Recommended for low speed operations.Other sizes available on request.

11 12

Øagitator

Ø agitatorshaft

Length PK Cat. No.

mm mm mm458090100150

8888

10

350350350550550

11111

9.197 0339.779 3269.197 0346.238 6729.197 036

11 12www.wen

k-lab

tec.co

m

www.wenk-labtec.com

479



E & OE.

BuddeMix Stirring System 1 - 4This novel stirring system has been conceived to mix low viscosity fluids as well as highly viscous media at slow speeds.Its special design creates inherent dynamic currents to produce perfectly homogeneous mixing results in very littletime. Additional components like baffles, bottom bearings, etc. are not needed.

Advantages at a glance:- suitable for low to highly viscous fluids- stirs media containing solids and fibres without any difficulty- gentle, low-shear stirring, due to slow stirring speed- constant product temperature, with no heating effect- short mixing times as the entire contents of the container are agitated- no air addition, no foaming- no baffles required- low gear wear due to balanced forces- minimal power consumption thanks to low speeds and short operation times- easy cleaning- material no. 1.4404

Particularly for potentially explosive atmospheres:- a single stirring zone, near to the container base, ensures easy mixing of settled residues,

e.g. in flow-through mixing containers- no baffles required, thus no additional sources of ignition

1 2

Type Ø agitator

Ø agitatorshaft

Length MaterialNo.

PK Cat. No.

mm mm mmBuddeMix 1BuddeMix 2BuddeMix 3BuddeMix 4

6080

120150

8101010

350350550850

1.44041.44041.44041.4404

1111

9.779 3319.779 3329.779 3339.779 334

Customised shaft length possible. Fine polishing Ra 0.6 to 0.8 µm and/or material certificate available on request.

1 2

Stirring rotors made of PTFEThe stirrer shafts consist of a PTFE-jacketed, stainless steel shaft and a stirrer paddle made of solid PTFE. The stainless steel core assures stability of the stirrershaft and allows safe attachment of the stirrer chuck. Thanks to the thick PTFE coat and the paddle made of solid PTFE, the medium will only come into contactwith PTFE. High chemical resistance makes it almost universally suitable. PTFE is extremely nonstick so that residues are repelled from shaft and paddle. Thestirrer shafts are similar in size to (KPG) glass stirring rods and are therefore interchangeable easily.

Operating temperature: -200 °C to +250 °C

Additional sizes and accessories are available on request.Information on the mixing effects of the different stirring geometries can be found in the descriptions of the stainless steel stirring rotors.

Propeller, 3 blades, PTFEThe blades are inclined at 45 °. Recommended for medium to high speed operations.

3

Øagitator

Ø agitatorshaft

To fitchuckdiam.

Length Blades PK Cat. No.

mm mm mm mm50757575140140200

68

1010101016

4.06.58.08.08.08.0

14.0

450350450800600800

1000

roundangularangularangularroundroundround

1111111

9.197 1389.197 1309.197 1409.197 1499.197 1949.197 1956.244 067

3

9.197 194

Crescent-shaped stirring rotors, PTFEThe semi-circular shape of the paddle is ideal for mixing in round-bottom flasks. The pivoting blade allows insertion into vessels with narrow necks and/or ground joints.

4BOLA

Øagitator

Ø agitatorshaft

To fitchuckdiam.

Length PK Cat. No.

mm mm mm mm659090909090125

88

1010101016

6.56.58.08.08.08.0

14.0

350450350450510600800

1111111

9.197 1219.197 1229.197 1279.197 1249.197 1289.197 1259.197 126

4www.wen

k-lab

tec.co

m

www.wenk-labtec.com

480



E & OE.

Anchor stirrer, PTFERecommended for low speed operations.

1

Øagitator

Ø agitatorshaft

To fitchuckdiam.

Length PK Cat. No.

mm mm mm mm6010080100

88

1010

6.56.58.08.0

350600350600

1111

9.197 1449.197 1459.197 1469.197 147

Additional wings available on request

1

Overhead stirrer rotors, centrifugal paddle, PTFEWith PTFE-coated, stainless steel shaft.

2

Shaftdiam.

To fitchuckdiam.

Ø Paddle

Length PK Cat. No.

mm mm mm mm681010

4.76.58.08.0

50909090

350450350450

1111

9.197 1769.197 1779.197 1789.197 179

2

Propeller stirring rotors, PP/PEPP propeller, stirring shaft PE-coated. Good operating characteristics thanks to the steel core of the stirring shaft. Highly resistant to breakage and reduced scratching effect when contacting the vessel wall.

3

Øagitator

Ø agitatorshaft

Length PK Cat. No.

mm mm mm45 6 380 1 9.197 101

3

Paddles, 2 blade propellerFor stirrer rotors with M6 thread. Stainless steel 1.4301.

4

Type Blade PK Cat. No.

mm2 blades, M62 blades, M62 blades, M62 blades, 90° offset, M62 blades, 90° offset, M62 blades, 90° offset, M6

50701005070100

111111

9.156 1649.156 1659.156 1669.156 1679.156 1689.156 169

4

Paddles, 3 blade propeller.Stainless steel 1.4301. With screwthread fitting as outlined below.

5


mm3 blades, M6 thread3 blades, M6 thread3 blades, M6 thread3 blades, M6 thread3 blades, M10 thread

5070100140140

11111

9.156 1709.156 1719.156 1729.156 1739.156 148

5

Paddles, 4 blade propellerStainless steel 1.4301. With screwthread shaft connection as outlined below.

6

Description Blade PK Cat. No.

mm4 blades, M6 thread4 blades, M6 thread4 blades, M6 thread4 blades, M6 thread4 blades, M10 thread4 blades, 90° offset, M6 thread4 blades, 90° offset, M6 thread4 blades, 90° offset, M6 thread

50701001501505070100

11111111

9.156 1749.156 1759.156 1769.156 1779.156 1429.156 1789.156 1799.156 180

6www.wen

k-lab

tec.co

m

www.wenk-labtec.com

481



E & OE.

Paddles, flask with holesStainless steel 1.4301. With screwthread fitting as outlined below.

1

Description Blade PK Cat. No.

mm3 hole, M6 thread6 hole, M6 thread10 hole, M6 thread14 hole, M6 thread

70 x 7070 x 7070 x 10070 x 150

1111

9.156 1859.156 1869.156 1879.156 188

1

Centrifugal stirrer headsStainless steel 1.4301. With screwthread fitting as outlined below.

2


mm1 blade, M6 thread2 blade, M6 thread2 blade, M6 thread2 blade, M6 thread

606090100

1111

9.156 1819.156 1829.156 1839.156 184

2

Rods for stirrer rotor shafts, M6 and 2 M10 screwthread endStainless steel 1.4301. With screwthread fitting as outlined below.For subsequent stirrer heads.

3

Description Diam. Length PK Cat. No.mm mm

Rod, screwthread M 6Rod, screwthread M 6Rod, screwthread M 6Rod, screwthread M 6Rod, screwthread M 6Rod, screwthread M 6Rod, screwthread M 6Rod, screwthread M 6Rod, screwthread M 6Rod, screwthread M 10Rod, screwthread M 10Rod, screwthread M 10Rod, screwthread M 10Rod, screwthread M 10Rod, screwthread M 10Rod, screwthread M 10Rod, screwthread M 10Rod, screwthread M 10Rod, screwthread M 10

666666666

10101010121212121212

150300350400450500600700800550750

10001300550750800

100013001500

1111111111111111111

9.156 1009.156 1019.156 1029.156 1039.156 1049.156 1059.156 1069.156 1079.156 1089.156 1299.156 1309.156 1319.156 1329.156 1339.156 1349.156 1359.156 1369.156 1379.156 138

3

www.wen

k-lab

tec.co

m

www.wenk-labtec.com

Movement Load capacity

(kg)

Rotation speed (rpm)

Orbit

(mm)

Variable speed range

IP class Product Cat. No. Page

orbital, vibrating 0,1 2800 4,5 No IP40 lab dancer, IKA 9.729 936 483orbital, vibrating 0,1 0-4500 4,5 Yes IP43 LLG-uniTEXER 1 6.263 490 483orbital, vibrating 0,1 1000-2800 4,5 Yes IP40 VORTEX 1, IKA 9.729 931 484orbital, vibrating 0,1 300-1800 2 Yes - LLG-uniPLATESHAKER 1 6.263 488 522orbital, vibrating 0,1 750-3000 4 Yes - Mini-Vortex Mixer PV-1, Grant 9.721 000 483orbital, vibrating 0,15 1000, 2000, 3000 3,7 No IP20 LLG-uniTEXER 6.261 826 485orbital, vibrating 0,3 500-2500 4 Yes IP21 VORTEX 3, IKA 9.729 950 487orbital, vibrating 0,3 500-2850 - Yes - Digital Vortex-Genie® 2, Scientific Industries 6.242 793 486orbital, vibrating 0,3 600-2700 - Yes - Vortex Genie® 2, Scientific Industries 9.730 060 486orbital, vibrating 0,3 600-2700 - Yes - Vortex-Genie® 2T, Scientific Industries 6.252 823 486orbital, vibrating 0,4 500-2500 4 Yes IP21 VORTEX 2, IKA 7.971 443 484orbital, vibrating 0,5 0-3000 4,5 Yes IP21 VORTEX 4 basic, IKA 9.729 932 484orbital, vibrating 0,5 0-3000 4,5 Yes IP21 VORTEX 4 digital, IKA 9.729 933 484orbital, vibrating 0,5 0-3000 4,5 Yes IP21 MS 3 basic, IKA 9.729 938 488orbital, vibrating 0,5 0-3000 4,5 Yes IP21 MS 3 digital, IKA 9.729 939 488orbital, vibrating 2 0-2200 4 Yes IP21 VXR basic, IKA 9.729 900 489orbital, vibrating 2 200-950 - Yes - Multi Vortex-Genie®, Scientific Industries 9.730 090 490orbital, vibrating 8 20-250 20 Yes - PSU-20i, Grant 6.256 816 492

orbital 0,3 100-1200 3 Yes - OrbitTM P2, Labnet 9.595 328 522orbital 0,6 100-1200 3 Yes - OrbitTM P4, Labnet 6.285 556 522orbital 2 5-220 20 Yes IP21 Orbital shaker KM CO2, Bühler 6.285 189 493orbital 2 30-420 8 Yes - Combi shaker KL 2, Bühler 9.838 320 493orbital 2 80-800 4 Yes IP21 KS 130 basic, IKA 9.838 150 494orbital 2,5 100-800 4 Yes IP21 RS-OS 10, Phoenix Instrument 9.852 120 491orbital 3 30-300 16 Yes - SSM1, Stuart 9.728 830 491orbital 3 50-450 10 Yes - PSU-10i, Grant 9.721 019 490orbital 4,5 20-300 19 Yes - Orbital shaker, Heathrow Scientific 6.270 566 492orbital 7,5 100-500 4 Yes IP21 RS-OS 20, Phoenix Instrument 9.852 121 491orbital 7,5 10-500 10 Yes IP21 KS 260 control, IKA 9.838 175 495orbital 7,5 20-500 10 Yes IP21 KS 260 basic, IKA 9.838 074 495orbital 8 20-500 10 Yes IP20 3005, GFL 9.837 905 496orbital 10 30-300 16 Yes IP31 SSL1, Stuart 9.728 840 494orbital 15 0-300 30 Yes IP21 KS 501 digital, IKA 6.285 448 499orbital 15 20-300 30 Yes IP20 3015, GFL 9.837 915 496orbital 15 20-300 30 Yes - 3017, GFL 9.837 917 496orbital 25 50-500 25 Yes - LLG-uniSHAKER 25 6.263 590 500orbital 30 20-250 32 Yes - 3019, GFL 9.837 919 497orbital 30 20-250 32 Yes - 3020, GFL 9.837 920 497

reciprocating 7,5 100-350 10 Yes IP21 RS-LS 20, Phoenix Instrument 9.852 123 502reciprocating 8 20-300 20 Yes IP20 3006, GFL 9.837 906 503reciprocating 15 0-300 30 Yes IP21 HS 501 digital, IKA 6.270 850 504reciprocating 15 20-300 30 Yes IP20 3016, GFL 9.837 916 504

tumbling 2 5-80 - - IP21 Rocker 2D basic, IKA 9.729 984 506tumbling 2 5-80 - - IP21 Rocker 2D digital, IKA 9.729 985 506tumbling 3 5-70 - - - SSM4, Stuart 9.728 821 507tumbling 5 1-99 - Yes IP20 PMR-100, Grant 9.721 015 508tumbling 5 10-120 - Yes - 35 EZ, Labnet 6.283 296 506tumbling 10 5-70 - - - SSL4, Stuart 9.728 801 507tumbling 0,5 5-30 - - - PMR-30, Grant 9.721 011 508tumbling 0,5 5-60 - - - PS-3D, Grant 9.721 014 509tumbling 1 1-100 22 Yes - PS-M3D, Grant 9.721 017 509tumbling 1,6 20 - - - LLG-uniSHAKER 2, LLG 6.263 640 508tumbling 2 30 - - IP21 Rocker 3D basic, IKA 9.729 986 509tumbling 2 5-80 - - IP21 Rocker 3D digital, IKA 9.729 987 509tumbling 3 5-70 - - - SSM3, Stuart 9.728 820 510tumbling 10 5-70 - - - SSL3, Stuart 9.728 800 510overhead 0,4 10-40 - - - RotoFlexTM Plus, Argos TechNologies 6.281 561 516overhead 0,5 5-30 - Yes - PTR-25, Grant 9.721 016 517overhead 0,5 10-100 - Yes - PTR-35, Grant 9.721 028 517overhead 0,8 20 - No - SB2, Stuart 9.645 322 519overhead 0,8 2-40 - Yes - SB3, Stuart 9.645 323 519overhead 0,8 10-100 - Yes - PTR-60, Grant 9.721 030 517overhead 2 20 - No IP21 Trayster basic, IKA 9.837 870 517overhead 2 5-80 - Yes IP21 Trayster digital, IKA 9.837 871 517overhead 2 0-80 - Yes IP21 LLG-uniROTATOR 2 6.263 660 516overhead 2 0-80 - Yes IP21 LLG-unio 2 6.263 665 519overhead 8 6-60 - - - STR4, Stuart 9.950 375 518overhead 20 1-20 - Yes - 3040, GFL 9.837 931 517

rolling, rocking 2 30 24,5 No IP21 Roller 6 basic, IKA 9.729 970 521rolling, rocking 2 30 24,5 No IP21 Roller 10 basic, IKA 9.729 972 521rolling, rocking 2 5-80 24,5 Yes IP21 Roller 6 digital, IKA 9.729 971 521rolling, rocking 2 5-80 24,5 Yes IP21 Roller 10 digital, IKA 9.729 973 521rolling, rocking 5 33 16 No IP20 SRT6, Stuart 9.728 810 520rolling, rocking 5 33 16 No IP20 SRT9, Stuart 9.728 812 520rolling, rocking 5 5-60 16 Yes IP20 SRT6D, Stuart 9.728 811 520rolling, rocking 5 5-60 16 Yes IP20 SRT9D, Stuart 9.728 813 520

Shakers Overview

482

4. Stirring, Shaking, MixingShakers overview


E & OE.

www.wen

k-lab

tec.co

m

www.wenk-labtec.com

483

4. Stirring, Shaking, MixingShakers and mixers/Vortexer


E & OE.

Test tube shaker LLG-uniTEXER 1Compact and cost-efficient test tube shaker with brushless motor drive and touch function for short-term operation.

Adjustable speed control up to 4500 rpm for excellent mixing results in a very short time. Especially for small volumes.

1

SpecificationsType of movement: orbitalOrbit: 4.5 mmSpeed range: 0 to 4500 rpmPermissible ambient temperature: 5 to 40 °CPermissible relative moisture: < 80 %Dimensions (W x D x H): 100 x 100 x 70 mmWeight: 0.55 kgPower supply: 100-240 V, 50/60 HzProtection class: IP 43Warranty: 3 years

Type PK Cat. No.

LLG-uniTEXER 1 with EU-plugLLG-uniTEXER 1 with UK-plug

11

6.263 4906.263 491

1

Vortex mixer PV-1With low profile and small footprint for gentle mixing to vigorous re-suspension of cell orchemical pellets.- variable speed: 750 rpm to 3000 rpm- continuous or touch operation- for tubes up to 28.5 mm (50 ml) diameter

2Grant

SpecificationsType of movement: orbitalOrbit: 4 mmSpeed range: 750 to 3000 rpmDimensions (WxDxH): 90 x 150 x 80 mmTemperature range: 4 to 40 °C

Type PK Cat. No.

PV-1 1 9.721 000

2

Test tube shaker, lab dancerInexpensive, compact, attractively designed, test tube vortex shaker. Designed for mixingsmall test samples by touch function.- Small, compact and reliable- For small containers up to 30 mm in diameter, e.g. test tubes, centrifuge tubes, Eppendorf tubes- Fixed speed (2800 rpm)- Excellent mixing- Top of housing and the test tube accessories are made from chemically inert plastic.

The bottom section is a coated, zinc die-casting.- Includes lightweight 12 V mains adapter

3IKA

SpecificationsMixing: orbital/vortexOrbit: 4.5 mmCapacity, volume: 1 tube, max. 50 mlMotor rating input/output: 1.2/0.8 WSpeed: 2800 rpm (fixed)Dimensions (Diam. x H): 100 x 70 mmWeight: 550 gMaterial housing: PPMaterial attachment: TPUMaterial base: Zinc, coatedEnclosure according to DIN EN 60529: IP 40Supply requirements: 100-240 V 50/60 HzTested to DIN EN IEC 61010-1.

Type PK Cat. No.

lab dancer EU/CHlab dancer UK

11

9.729 9364.008 065

3

www.wen

k-lab

tec.co

m

www.wenk-labtec.com

484



E & OE.

Shaker VORTEX 1Test tube shaker with infinitely adjustable speed range. Specially for mixing small samplevolumes with touch function.

1IKA

SpecificationsType of movement: orbital/vortexOrbital diameter: 4.5 mmMax. shaken quantity (1 test tube) 100 mlMotor rating input/output: 1.2/0.8 WSpeed range: 1000 to 2800 rpmDimensions (W x H x D): 95 x 110 x 70 mmWeight: 0.55 kgEnclosure according to DIN EN 60529: IP 40

Type PK Cat. No.

VORTEX 1 1 9.729 931

1

Shaker VORTEX 2Vortex shaker especially for short time operation (Touch function) or continuous operation.

2IKA

SpecificationsType of movement: orbital/vortexOrbital diameter: 4 mmMax. shaken quantity: 400 gMotor rating input/output: 39/9 WSpeed range: 500 to 2500 rpmDimensions (W x H x D): 120 x 138 x 140 mmWeight: 3.9 kgEnclosure according to DIN EN 60529: IP 21

Type PK Cat. No.

VORTEX 2 1 7.971 443

2

Shaker VORTEX 4 basic/digitalCompact, universal small shaker suitable for shaking tasks with small vessels and microtiterplates

34

IKA

SpecificationsType of movement: orbital/vortexOrbital diameter: 4.5 mmMax. permitted shaking weight (incl. attachment) 0.5 kgMotor rating input/output: 10/8 WSpeed range: 0 to 3000 rpmTimer: only for VORTEX 4 digital (1 sec. - 999 min)Dimensions (W x H x D): 176 x 190 x 63 mmWeight: 3.0 kgEnclosure according to DIN EN 60529: IP 21

Type PK Cat. No.

VORTEX 4 basicVORTEX 4 digital

11

9.729 9329.729 933

3

9.729 932

4

9.729 933

www.wen

k-lab

tec.co

m

www.wenk-labtec.com

485



E & OE.

Vortexer LLG-uniTEXER with universal attachment

One head - multiple usesVortexer with single carrier head, accommodating the most popular consumables and tubes:for 1 x assay plate, 2 x 50 ml conical tubes, 2 x 15 ml conical tubes, 2 x 5 ml conical tubes, 4 x 1.5/2 mlmicrocentrifuge tubes, 6 x 0.5 ml and 24 x 0.2 ml microcentrifuge tubes.

- Touch function for short-term operation- Very easy to clean- Elastomeric feet ensure excellent stability on the bench- Modern design- Robust housing made of ABS

1 2 3 4

SpecificationsType of movement: orbital/vortexOrbital diameter: 3.7 mmSpeed: 1000, 2000 und 3000 rpmDimensions (W x D x H): 173 x 198 x 198 mmWeight: 3.8 kgPower supply: 220 V, 50/60 HzProtection class: IP 20Warranty: 3 years

Type PK Cat. No.

LLG-uniTEXER 1 6.261 826

1

2 3 4

Mixing head with multiple loading possibilities5abcdefgh

Center pad area for hand held mixingAssay plate x 1 (to be used with retention cords)50 ml conical tubes x 2 (horizontally mounted)15 ml conical tubes x 2 (horizontally mounted)5 ml tubes x 2 (horizontally mounted in the same retention space as 15 ml)1.5/2 ml microfuge tubes x 4 (vertically mounted)0.5 ml microfuge tubes x 6 (vertically mounted)0.2 ml microfuge tubes (strip tubes) x 24 (vertically mounted)

5

0.2 ml Tubes x 24

0.5 ml Tubes x 6

1.5/2 ml Tubes x 4

5 ml Tubes x 2

15 ml Tubes x 2

50 ml Tubes x 2

Assay Plate x 1www.wen

k-lab

tec.co

m

www.wenk-labtec.com

486



E & OE.

Vortex-Genie®-seriesRobust and reliable shakers for speedy mixing and shaking of samples. Multiple accessories:e.g. adapter tops for test tubes, beakers, centrifuge tubes etc. Adapter tops can be changedeasily with the snap fit system.

Vortex-Genie® 2: Variable speed for precise mixing from gentle to vigorous. Broad range of attachments for mosttubes, plates and other containers. Hands-Free or Touch On control.

Vortex-Genie® 2T with an integrated timer: Timer function: (Touch On) 1-60 seconds, (Hands-Free) 1-60 minutesor continuous. Unit automatically stops at the end of user programmed time.

Digital Vortex-Genie® 2 with digital control and display of speed and time: Digital display provides accuracy,reproducibility and repeatability. Timer function: (Touch On) 1-99 seconds, (Hands-Free) 1-99 minutes or continuous.Specially configured unit for Applied Biosystems protocol available.

Vortex Genie® Pulse: Fully programmable vortex mixer with ON/OFF feature. Pulse 0.1 sec to 99 min.

1Scientific Industries

Specifications Vortex-Genie® 2 / Vortex-Genie® 2T / Digital Vortex-Genie® 2 /Vortex Genie® Pulse

Shaking movement: orbitalSpeed display/Timer: Scale/No / Scale/Scale / Digital/DigitalSpeed range: 600-2700 rpm/600-2700 rpm/500-2850 rpm/500-2850 rpmTimerInterval operation: -/ 1 to 60 s/1 to 99 s/0.1 s to 99 minHands-free mode: -/ 1 to 60 min/1 to 99 min/1 to 99 minDimensions (L x W x H): 165 x 122 x 165 mmPermissible ambient conditions: 0 to 38 °C at 95 % rhWeight: 4 kgPower supply: 230 V, 50/60 Hz


Vortex Genie® 2Vortex Genie® 2Vortex Genie® 2Vortex-Genie® 2TVortex-Genie® 2TVortex-Genie® 2TDigital Vortex-Genie® 2Digital Vortex-Genie® 2Digital Vortex-Genie® 2Vortex Genie® PulseVortex Genie® PulseVortex Genie® Pulse

EUUKCHEUUKCHEUUKCHEUUKCH

111111111111

9.730 0606.251 9396.235 6846.252 8236.252 9469.730 1216.242 7939.730 1206.240 5996.287 6716.287 6746.287 675

1

Accessories for Vortex-Genie®-series

2

3

4

5

Scientific Industries


Standard shaking attachment, diam. 25 mmMicrotube holder for 12 x 1.5 or 2.0 ml tubesTurboMix® attachmentRecessed platformElastic bands for recessed platformFoam inserts for 9-16 mm tubes, for recessed platformPlatform (diam. 150 mm)Foam inserts for microtubes, for platform (diam. 150 mm)Foam inserts for microplates, for platform (diam. 150 mm)Platform (diam. 75 mm) with rubber coverSpare rubber cover (diam. 75 mm)Attachment, horizontal, for 24 microtubesAttachment, horizontal, for 12 x 15 ml tubesAttachment, vertical, for 6 x 50 ml tubesAttachment, vertical, for 24 microtubesAttachment, vertical, for 6 x 50 ml, 6 x 15 ml and 12 x microtubesHigh speed attachment, vertical, for 3 x 50 ml tubes

11112212111111111

9.730 0516.253 2817.400 0457.301 3826.235 2267.510 2957.091 2206.252 9449.730 0586.254 0169.730 0536.252 8147.970 7406.252 9426.257 9927.930 2156.259 054

2

6.259 054

3

7.301 382

4

6.252 944

5

6.252 814

www.wen

k-lab

tec.co

m

www.wenk-labtec.com

487



E & OE.

Shaker Vortex 3Vortex shaker suitable for intermittent operation (touch function), activated by pressingshaker attachment, or for continuous operation.

- Wide speed range, infinitely adjustable- Versatile, due to 3 accessory interchangeable attachments and 7 inserts (e.g. Eppendorf tubes, microtitre plates,

250 ml Erlenmeyer flasks etc.), please order separately- Attachments securely click onto shaker in any position- Strap clamp (VG 3.36) ensures easy holding of round/Erlenmeyer flasks- Sturdy, die cast zinc casing- Stable at high speeds due to special feet (silicone base with ultra-high vibration damping)- Eccentric drive with ball bearings- Self-ventilated motor allows continuous operation with minimal warm-up of the housing

Supplied with standard attachment.

1IKA

SpecificationsType of movement: orbital/vortexOrbital diameter: 4 mmMotor rating input/output: 58/10 WSpeed range: 500 rpm to 2500 rpmSpeed indication: scale 0 to 6Dimensions (W x D x H): 127 x 149 x 136 mmWeight: 4.5 kgProtection class acc. to DIN EN 60529: IP 21Supply requirements: 230 V, 50/60 HzTested to DIN EN IEC 61010-1.

Type PK Cat. No.

VORTEX 3 EUVORTEX 3 CHVORTEX 3 UK

111

9.729 9504.008 0624.008 061

1

www.wen

k-lab

tec.co

m

www.wenk-labtec.com

488



E & OE.

Accessories for shaker Vortex 3

1

IKA


VG 3.1VG 3.2VG 3.3VG 3.31VG 3.32VG 3.33VG 3.34VG 3.35VG 3.36VG 3.37

Standard attachment, for test tubes, small vessels*One-hand attachment 88 mm, rubber inletStandard tray 150 mm, rubber inletInsert for 54 Eppendorf tubesInsert for 18 x 10 mm diameter test tubesInsert for 12 x 12 mm diameter test tubesInsert for 8 x 16 mm diameter test tubesInsert for 8 x 20 mm diameter test tubesAttachment for Erlenmeyer and round vessels 100 to 250 mlHolder for 1 standard microtitre plate

1111111111

9.729 9549.729 9559.729 9519.729 9569.729 9579.729 9589.729 9599.729 9529.729 9539.729 960

*included in delivery

1

9.729 951

Shaker MS3 basic/digitalCompact, universal small shaker suitable for shaking tasks with all small vessels and microtitre plates.- Continuous or touch operation (with standard attachment)- Two operating modes available:

Mode A (safe mode with attachment detection)the maximum speed of 3000 rpm is only attained with the standard attachment in touch mode. When using otherattachments the speed is limited to 1300 rpm.

Mode B (without attachment detection)a speed of 3000 rpm is possible with all attachments.- Stable in all speed ranges- Sturdy, zinc, die-cast casing

MS 3 digital additionally with countdown function timer (1 sec to 999 min).Items supplied with MS3 basic + digital: Standard attachment, universal attachment, one-hand insertAdditional items supplied with MS3 digital: Microtitre plate attachment, test tube insert with 6 holes for 12 mmdiameter tubes

IKA

Specifications:Type of movement: orbitalOrbit: 4.5 mmMax. permitted shaking weight (incl. attachment): 0.5 kgMotor rating input/output: 10/8 WSpeed display: ScaleSpeed range: 0 to 3000 rpmDimensions (W x D x H): 148 x 205 x 63 mmWeight: 2.9 kgProtection class acc. to DIN EN 60529: IP 21Supply requirements: 100-240 V, 50/60 HzTested to DIN EN IEC 61010-1.

2

9.729 938

3

9.729 939

23

Type Operating mode PK Cat. No.

MS 3 basic EU/UK/CH/USMS 3 digital EU/UK/CH/US

Continuous mode and touch operationTimer and continous mode, touch operation

11

9.729 9389.729 939

Microplate shakers please see page 522.

Accessories for Shaker MS 3

4

IKA


MS 3.1MS 3.4MS 3.5

Standard attachmentMicrotitre plate attachmentPCR attachment

111

9.729 9429.729 9436.237 469

4

9.729 942

www.wen

k-lab

tec.co

m

www.wenk-labtec.com

489



E & OE.

Vibrating shaker, VXR basic Vibrax®

Optoelectronically controlled small shaker with a very wide speed range.- Suitable for continuous operation- New design and improved drive system- Circular shaking motions- Slow speeds are well maintained- Attachments are interchangeable

Please order the required shaker attachment separately.

1IKA

Specifications:Shaking motion: OrbitalOrbit: 4 mmMotor rating input/output: 35/13.2 WSpeed range: 0 to 2200 rpmDimensions (W x D x H): 157 x 247 x 130 mmWeight (without attachment): 6.1 kgMax. loading: 2 kgProtection class DIN EN 60529: IP 21Supply requirements: 230 V, 50/60 HzTested to DIN EN IEC 61010-1.

Type PK Cat. No.

VXR basicVXR basic UK

11

9.729 9006.202 467

Optional accessories: Attachements: VX 1, VX 2, VX 2E, VX 7, VX 8, VX 11, VX 11.1, VX11.2, VX 11.3, VX 11.4

1

Vibrating shaker, VXR basic Vibrax®, accessory attachmentsVX 1 one-hand attachment: For shaking single vessels 1 ml to 250 ml.

VX 2 test tube attachment:For up to 36 test tubes or centrifugal tubes with a diam.of 16 mm.

VX 2E "Eppendorf" attachment: For shaking of max. 64 "Eppendorf" tubes (1.5 ml).

23

IKA

IKA

Type Width Depth Height PK Cat. No.mm mm mm

VX 1VX 2VX 2E

130140210

135145210

4011565

111

9.729 9019.729 9029.729 914

2

9.729 901

3

9.729 902

Accessories for Shaker VXR basic Vibrax®

VX 11 Basic holder: Attachment for test tube inserts.

VX 11.1 Test tube insert: Attachment for Eppendorf tubes or test tube inserts.

VX 11.2/ VX 11.3/VX 11.4 Test tube inserts: For test tubes.

4

5

Type Diam.of holes

No.of holes

PK Cat. No.

mmVX 11VX 11.1VX 11.2VX 11.3VX 11.4

10121620

70413218

11111

6.231 2846.232 8136.231 2856.228 2469.729 915

4

6.231 284

5

9.729 915

www.wen

k-lab

tec.co

m

www.wenk-labtec.com

490

4. Stirring, Shaking, MixingShakers and mixers/Vortexer-Orbital shakers


E & OE.

Shaker Multi Vortex Genie®

Robust and reliable shaking device for mixing and shaking of samples in Erlenmeyerflasks or vials.- Digital display for speed and time- Speed increase in steps of 10 rpm Robust metal case- Secure stand at high speed thanks to supports with high vibration damping- Can be loaded with e. g. max. 6 Erlenmeyer flasks 250 ml or 2 multi racks each for 12 test tubes

(max. tube diameter 29 mm, length min. 85 mm)- After 10 minutes of non use, the mixer switches to "sleep" mode

Supplied with: incl. platform with clamp/tension roller (for securely attaching standing vessels) and 2 multi-racks.

1Scientific Industries

SpecificationsType of movement: vibratingDimensions (W x D x H): 310 x 270 x 195 mmWeight: 11.3 kgSupply requirements: 230 V, 50 HzSpeed range: 200 rpm to 950 rpm


Multi Vortex-Genie®



EUUKCH

111

9.730 0906.265 2216.265 222

1

Orbital Shaker PSU-10iMicroprocessor controlled shaking platform providing smooth and quiet horizontal orbitalmotion for mixing in bottles, flasks and beakers.- Continuous or timed operation with automatic switch-off- Reliable direct drive system- Automatic load balancing system- The five interchangeable accessory platforms enable a wide choice of vessels to be used,

including bottles, flasks and beakers, dishes, boxes and petri-dishes.

2Grant

SpecificationsType of movement: orbitalOrbit: 10 mmMax. Load: 3 kgSpeed range: 50 to 450 rpm / 10 rpm incrementsTimer range: 1 min to 96 hours or continuousOverall dimensions (W x D x H): 220 x 205 x 90 mmPower supply: 100-240 V, 50/60 Hz

Type Max.Load

PK Cat. No.

kgPSU-10i 3.0 1 9.721 019

2

Accessories for Orbital shaking platform PSU-10i

3

Grant


Bio PP-4PUP-12P12-100

P6-250

P16-88

Flat platform, working area 230 x 230 mmUniversal platform, working area 270 x 195 mmPlatform with clamps for 12 x 100 mlflasks / 150 ml beakersPlatform with clamps for 6 x 250 mlflasks / 300 ml beakersPlatform with spring holders for 88 tubes up to 30 mm

111

1

1

9.721 0189.721 0219.721 023

9.721 024

9.721 049

3

9.721 021

www.wen

k-lab

tec.co

m

www.wenk-labtec.com

491

4. Stirring, Shaking, MixingShakers and mixers/Orbital shakers


E & OE.

Orbital shaker RS-OS seriesA compact, orbital shaker with ideal swivel motion. The shakers can be set up individually byusing the comprehensive range of accessories.Features at a glance RS-OS 10/20:- compact shaker for a maximum shaking weight of 2.5 and 7.5 kg- Backlight LCD display for speed and timer adjustment.- Speed, time and operating mode can be viewed simultaneously- Comprehensive accessories- Electronic time switching clock: control time or continuous operation mode- PC control via RS232 interface, the special Shaker PC software can realise the setting of instrument

parameters on the PC and the display of working curves real-time.- 2 years warranty

Please order attachments and further accessories separately.

1Phoenix Instrument

SpecificationsType of movement: orbitalOrbit: 4 mmSpeed range: 100 to 800 rpmMax. Load RS-OS10/ RS-OS 20: 2.5kg/7.5 kgVoltage: 100 to 240 VAC, 50/60 HzPower consumption: 30 WSpeed display: digitalInterface: RS 232Platform dimensions (W x D): 240 x 240 mmOverall dimensions (W x D x H): 340 x 300 x 100 mmHousing IP rating IP 21

Type Dimensions Rotationspeed

Max.Load

Weight PK Cat. No.

mm rpm kg kgRS-OS 10RS-OS 20

340 x 300 x 100420 x 370 x 100

100-800100-500

2.57.5

8.113.5

11

9.852 1209.852 121

1

Accessories linear and orbital shaker RS-OS/RS-LR series2Phoenix Instrument


RSS-E 100RSS-E 110RSS-E 200RSS-E 220

universal attachment with clamping rolls for OS/LS 10universal attachment with vertical adjustable clamping rolls for OS/LS 10universal attachment with clamping rolls for OS/LS 20dish attachment with tensioning belt for OS/LS 20

1111

9.852 1259.852 1279.852 1299.852 146

2

Orbital shaker SSM1- Smooth orbital shaking action- Built-in digital timer- Variable speed control 30 to 300rpm- Supplied with non-slip mat for microplates etc.- Optional accessory cradle system for flasks and bottles

The compact SSM1 provides a smooth uniform circular motion with an orbit of 16mm. It is supplied with a non-slipmat that can hold up to four microplates or diagnostic cards. Alternatively, an accessory cradle system is availablethat can accommodate a variety of vessels including flasks, bottles or beakers via four rubber securing bars. It willhold up to: 4 x 250 ml or 2 x 500 ml or 1 x 1000 ml Erlenmeyer Flasks or bottles.

Speed is variable from 30 rpm to 300 rpm. Once set on the digital display, the shaking speed is effectively maintainedeven over long periods of time. Shaking times can be set to run for 1 second to 9 hours on the built-in digital timer,or the unit can also be set for continuous operation.With BioCote, silver-based, antimicrobial protection.

34

Stuart

SpecificationsType of movement: orbitalOrbit: 16 mmSpeed range: 30 to 300 rpmMax. Load: 3 kgPlatform dimensions (W x D): 220 x 220 mmOverall dimensions (W x D x H): 240 x 300 x 140 mmNet weight: 5 kgSupply requirement: 230 V, 50 Hz, 50 W

Type Description Max.Load

PK Cat. No.

kgSSM1SSM1/1

Shaker, orbital, miniAccessory cradle with 4 securing bars

3.0 11

9.728 8309.728 831

Attachments are not included. - Please order separately.

3

9.728 830

4

9.728 831

www.wen

k-lab

tec.co

m

www.wenk-labtec.com

492



E & OE.

Digital Orbital Shaker- Electronically controlled and programmable shakers- Slow, soft-start greatly decreases the risk of spills- Erlenmeyer flasks, beakers, culture flasks and micro plates can easily be fixed using 8 rubber strips- Digital LCD display for speed and run time control- Integrated overload shutdown- Permanent motor feedback, which automatically adjusts the speed even if the load is changed during operation- Continuous mode or timer for up to 49 hours- Soft rubber feet minimise system movement- Platform with non-slip surface

Platform capacity: Erlenmeyer Flasks e.g.: 25 ml x 50 ml, 16 ml x 125 ml, 9 ml x 250 ml , 4 ml x 500 ml, 4 ml x 1000 ml, 1 ml x 2000 mlBeakers e.g.: 36 ml x 50 ml , 25 ml x 100 ml, 16 ml x 250 ml, 9 ml x 400 ml, 4 ml x 1000 mlDeep well assay plates e.g.: 6 x standard (more if stacking is an option)

Supplied with: Orbital Shaker incl. universal attachment, universal power supply, non-slip rubber mat and 8 elasticties

1Heathrow Scientific

SpecificationsType of movement: orbitalOrbit: 19.0 mmSpeed range: 20 to 300 rpm (adjustable) / 1 rpm incrementsMax. Load: 4.5 kgTimer range: 0 to 49 hours / 1 second incrementsSpeed display: digitalAmbient conditions: 4 to 40 °C; 20 % to 80 % RH, non-condensingPlatform interior dimensions: 279 x 279 mmOverall dimensions (W x D x H): 314 x 310 x 197 mmWeight: 8.2 kgPower supply: 100 to 240 V, 50/60 Hz


Digital Orbital Shaker 1 6.270 566

1

Orbital Shaker PSU-20iPowerful and efficient microprocessor controlled, multi-functional orbital shaker providing allthat is required to mix your samples: rotation, reciprocation and vibration. This enables optimisation of the mixing whether in flasks, beakers, Petri dishes or other laboratory vessels.

- Orbital motion, orbital reciprocation and vibration functions all in one product- Reciprocal rotation: 0 to 360° turning angle, in 30 degree steps- Vibration: 0 to 5° turning angle, 1 degree steps- Loading capacity: 8 kg- Fully programmable sequence that can use one or all the functions- 6 interchangeable platforms for vessels up to 1000 ml including a multi-level platform to hold a large number of

various microplates, Petri dishes and culture bags.

2Grant

SpecificationsType of movement: orbital/reciprocal/vortexOrbit: 20 mm/0 to 360°/0 to 5°Speed range: 20 to 250 rpmMax. Load: 8 kgTimer: 1 min to 96 hPermissible ambient temperature: 4 to 40 °CDimensions (W x D x H): 410 x 410 x 130 mmWeight: 13 kgPower supply: 240 V, 50/60 Hz

Type Max.Load

PK Cat. No.

kgPSU-20i 8.0 1 6.256 816

2

Accessories for Orbital shaker PSU-20i

3

Grant


PUP-330PP-20P30-100P16-250P9-500P6-1000

Universal plattform with adjustable barsFlat platform with non-slip mat, 480 x 380 mmPlatform with clamps for 30 x 100 ml flasksPlatform with clamps for 16 x 250 ml flasksPlatform with clamps for 9 x 500 ml flasksPlatform with clamps for 6 x 1000 ml flasks

111111

9.721 0816.256 8099.721 0619.721 0629.721 0639.721 064

3

9.721 063

www.wen

k-lab

tec.co

m

www.wenk-labtec.com

493



E & OE.

Orbital shaker KM CO2/KM 2KM CO2: Stainless Steel Shaker especially for incubators with CO2 concentration.Scope of supply: Shaker incl. basic platform with rubber mat and external control unit.

KM 2: Highly reliable shaker which requires little space.Scope of supply: Basic device incl. basic platform and rubber mat.

12

Bühler

Type of movement: orbitalOrbit: 20 mmSpeed range: 5 to 220 rpm, in steps of 5Max. Load: 2 kgCO2 concentration: 20 %Timer: 0 to 99 h 59 min/continuousPower consumption: 4 WPermissible ambient temperature: 4 to 45 °CPower supply: 100-240 V, 50/60 HzProtection class: IP 21


Weight PK Cat. No.

mm kgOrbital shaker KM CO2

Orbital shaker KM 2230 x 340 x 145250 x 415 x 145

7.68.1

11

6.285 1899.838 140

1

6.285 189

2

9.838 140

Accessories for Orbital shaker KM CO2/KM 2

3

Bühler


Universal tray KM Mini for KM 2 (without spring clamps)Universal tray KM (without spring clamps)Clamping strips KM

111

6.070 2766.900 3486.070 277

3

6.900 348

Komto shaker KL 2Mini shaker which can be switched between orbital and reciprocating motions. Includes flask attachment system with 3 clamping rollers. Versatile, for use in medicaldiagnostics, haemotology, for cell cultivation or analysis.

Scope of supply: Shaker and accessory platform with 3 clamping rollers and anti-slip mat.

4Bühler

Speed range: 30 to 420 rpm. with stepless electronic adjustment8 mm

Max. loading: 2 kgPlatform (W x D): 300 x 300 mmOverall (W x D x H): 355 x 455 x 195 mmWeight: 13.5 kgSupply requirements: 230 V, 50/60 Hz, 125 W.

Orbit or stroke:

Type PK Cat. No.

Komto shaker KL 2 1

4

9.838 320

www.wen

k-lab

tec.co

m

www.wenk-labtec.com

494



E & OE.

Orbital shakers SSL1- available with orbital or reciprocating action- digital speed selection up to 300 rpm with soft start- built-in digital timer- reliable, quiet running mechanism- fully adjustable cradle system

This lab scale platform shaker has powerful yet quiet shaking mechanisms and has been designed for trouble-free,continuous use. The cradle type platforms have four rubber cushioned horizontal securing bars which can be easilyadjusted both vertically and horizontally to hold most sizes and types of vessel, including flasks, bottles and beakers.For example, they will accommodate the following Erlenmeyer flasks or bottles: 12 x 250 ml or 9 x 500 ml or 6 x 1000 ml or 2 x 2000 ml. Speed is continuously adjustable and is set digitally. The speed is accurately maintained,even over long runs. A built-in digital timer allows shaking times from 1 to 999 minutes to be set. Alternatively the unitcan be set for continuous operation.

With BioCote silver based antimicrobial protection.

1

Stuart

SpecificationsType of movement: orbitalOrbit: 16 mmSpeed range: 30 to 300 rpmMax. Load: 10 kgTimer: 1 to 999 minPower consumption: 50 WWorking temperature: 4 to 40 °CPlatform dimensions (W x D): 335 x 335 mmOverall dimensions (W x D x H): 360 x 420 x 270 mmNet weight: 11 kgSupply requirements: 230 V, 50 Hz


PK Cat. No.

kg

SSL1SSL1/1

SSL1/2

Shaker, orbital, large platformAccessory platform 510 x 510 mmwith 6 rubber securing barsAccessory flat platform 350 x 350 mm without cradle

10.0 11

1

9.728 8409.728 842

9.728 843

1

9.728 840

Orbital shaker, KS 130 basic/ PackageSmall, quiet running, low-friction shaker with effective orbital movement and a maximumloading of 2 kg.- Electronic speed control and timer adjustment- LED scale bar speed and time display- Large selection of attachments for different container types and sizes- Attachments not included - Please order separately.

Package includes: KS 130 basic, adhesive mat STICKMAX, AS 130.3 Dish attachmentKS 130 control available on request.

2 3IKA

SpecificationsType of movement: orbitalOrbit: 4 mmMax. Load (incl. attachment): 2 kgMotor rating input/output: 45 /10 WSpeed range: 80 to 800 rpmSpeed indication: LED scale barTimer: 5 to 50 min/continuousDimensions (W x D x H): 270 x 316 x 98 mmWeight: 8.8 kgHousing IP rating to DIN EN 60529: IP 21Power supply: 230 V, 50/60 HzTested to DIN EN IEC 61010-1.

Type Max.Load

PK Cat. No.

kg

KS 130 basicKS 130 basic Package (incl. adhesive mat STICKMAX, AS 130.3 Dish attachment)

2.02.0

11

9.838 1509.838 151

2

3

www.wen

k-lab

tec.co

m

www.wenk-labtec.com

495



E & OE.

Orbital shaker, KS260 control/ PackageCompact, low-level, platform shaker with highly effective, orbital motion, maximum capacity 7.5 kg.

- Electronic speed control and timer adjustment- Separate digital speed and timer displays with operating mode indication- Timer: 0 to 9 h 59 min or continuous operation- Controlled stop-point positioning function (enables use in automated robotic sampling routines)- All functions can be controlled and documented using labworldsoft® software- Special variant with reverse rotation function available on request- Large selection of attachments enable use with a wide variety of vessel shapes and sizes- Attachments are not included - Please order separately

IKA

SpecificationsType of movement: orbitalOrbit: 10 mmMax. Load (incl. attachment): 7.5 kgMotor rating input/output: 45/10 WSpeed range KS 260 basic/KS 260 control: 20 to 500 rpm/10 to 500 rpmSpeed indication KS 260 basic/KS 260 control: LED/digitalTimer KS 260 basic/KS 260 control: 5 to 50 min/continuous/1 to 599 min/continuousDimensions (W x D x H): 360 x 420 x 98 mmWeight KS 260 basic/KS 260 control: 8.5 kg/8.8 kgHousing IP rating to DIN EN 60529: IP 21Interface: RS 232/analogueSupply requirements: 230 V, 50/60 HzTested to DIN EN IEC 61010-1.

1

9.838 074

2

9.838 075

3

9.838 175

4

9.838 176

1234

Type Max.Load

PK Cat. No.

kg

KS 260 basicKS 260 basic Package (incl. 2 x STICKMAX, AS 260.3 Dish attachment)KS260 controlKS 260 control Package (incl. 2 x STICKMAX, AS 260.3 Dish attachment)

7.57.57.57.5

1111

9.838 0749.838 0759.838 1759.838 176

Accessories for KS260 can be found in our webshop.

Accessories for orbital and reciprocating shakersClamps for orbital shakers Ika KS 130 basic/control, KS 260 basic/control and reciprocatingshakers Ika HS 260 basic/control, HS 501 digital, KS 501 digital, KS 4000 i/ic control.

5IKA

Type Forvolume

PK Cat. No.

mlAS 2.1AS 2.2AS 2.3AS 2.4AS 2.5

2550100200/250500

11111

9.838 0919.838 0929.838 0939.838 0949.838 095

5

www.wen

k-lab

tec.co

m

www.wenk-labtec.com

496



E & OE.

Shakers, 3000 seriesHousing made of high impact strength polystyrene, finished in off-white. The base plate ismade of electrolytically galvanized, powder-coated sheet steel, the shaking platform ofanodised aluminium, equipped with four plastic pins (models 3005 to 3018 and 3023) for secure attachment ofaccessory equipment (holds almost all shapes of vessels used in standard laboratory applications). Models 3019/3020: Shaking platform made of electrolytically galvanized, powder-coated sheet steel, equipped with foursupport rods with screw-type clamps made of stainless steel. Clearly laid out control panels for easy operation and ana.c. motor with overload protection drives the unit. Stepless, electronic speed control, with soft-start and quietoperation. Constant speed maintained during continuous operation, independent of load. Suitable for use inlaboratories, incubation and controlled environment rooms at ambient temperatures between +10 °C and +50 °C. The devices are maintenance-free and have the CE mark.Analogue control models (1)

3005/3006/3015/3016/3019/3023.Timer for operations up to 60min. and continuous operation. Digital control models (2)

3017/3018/3020.Microprocessor controlled, with interface RS 232. Timer: 1 min. up to 99:59 h or continuous operation. Speed andremaining time indicated by two LCD readouts.

The following shaker types are available: Orbital shakers, reciprocating shakers, rocking shakers, tumblingshakers and overhead shakers. Please see the different motion types of the 3000 series shakers in therelevant chapters.

1 2GFL

1

2

Orbital shaker 3005Space-saving, universally applicable. Either for gentle movement of liquids or vigorous mixing.Applications are in biology and microbiology laboratories and in diagnostic test reactions. Compact, low-wear counterbalanced drive mechanism, ensuring high stability for continuous operation.

3GFL

SpecificationsType of movement: orbitalOrbit: 10 mmSpeed range: 20 rpm to 500 rpmMax. Load: max. 8 kgPlatform (W x D): 330 x 330 mmDimensions (W x D x H): 380 x 510 x 140 mmSupply requirements: 230 V, 50/60 Hz, 65 WNet/Gross weight: 10 kg / 12 kgTimer: up to 60 min or continuous operation

Type Max.Load

PK Cat. No.

kg3005 8.0 1 9.837 905

3

Orbital shakers 3015 and 3017For gentle motion or vigorous shaking of liquids. Quiet operation. For universal application, e.g. inbiochemistry, biotechnology, microbiology, bacteriology and virology, especially suitable for growingmicroorganisms, cell and tissue cultures. Compact, low-wear counterbalanced drive mechanism for orbital shaking motion.

4GFL

SpecificationsType of movement: orbitalOrbit: 30 mmSpeed range: 20 to 300 rpmMax. Load: 15 kgPlatform (W x D): 450 x 450 mmOverall (W x D x H): 510 x 625 x 142 mmSupply requirements3015: 230 V, 50/60Hz, 65 W3017: 230 V, 50 or 60Hz, 65 W*Net/gross weight: 18/22 kgTimer:3015: up to 60 min. or continous operation3017: 1 min up to 99:59 hours or continous operationModel 3017: microprocessor controlled,

with RS-232 interfaceType Max.

LoadPK Cat. No.

kg30153017**

15.015.0

11

9.837 9159.837 917

* Please specify when placing your order!**Speed and remaining time indicated by 2 LC-displays.

4

www.wen

k-lab

tec.co

m

www.wenk-labtec.com

497



E & OE.

Orbital shakers 3019 and 3020With a large shaking tray for accommodating heavier loads. Well-suited for gentle motion orvigorous mixing of the most varying liquids, thanks to its useful shaking amplitude and theoption of adjusting its speed. Quiet, universally applicable, e.g. for analytical or diagnostic applications in thepharmaceutical industry, chemistry, biology, or in plant breeding or nutritional applications, in the growing ofmicroorganisms, cell and tissue cultures. Compact, low-wear counterbalanced drive mechanism, ensuring high stabilityand dependability. (3020 with RS 232 interface)

1GFL

SpecificationsType of movement: orbitalOrbit: 32 mmMax. Load: 30 kgSpeed range: 20 to 250 rpm, when the rack

frame is used 20 to 200 rpmPlatform dimensions (W x D): 676 x 540 mmOverall dimensions (W x D x H):Supply requirements:3019: 230 V, 50/60 Hz, 90 W3020: 230 V, 50 or 60 Hz, 90 W*Net/gross weight:Timer:3019: Up to 60 min. or continuous operation3020: 1 min. up to 99:59 h. or continous operation

microprocessor controlled,

745 x 730 x 135 mm

34/40 kg

Model 3020:with a built-in RS 232 interface

Type Max.Load

PK Cat. No.

kg30193020**

30.030.0

11

9.837 9199.837 920

* Please specify when placing your order.**Speed and remaining time indicated by 2 LC-displays.

1

Shaking TraysMade of stainless steel with holes to accommodate clamps for Erlenmeyer flasks and otheraccessory equipment.

Type 3950: for Shakers 3005 and 3006.

Type 3966: for Shakers 3011 to 3018 (see also Shaking Incubator 3031).

Type 3980: for Shakers 3019/3020 (see also Shaking Incubator 3033).

Made of 3 mm thick anodised aluminium, with holes to accommodate clamps for Erlenmeyer flasks and otheraccessory equipment.

2GFL

Type ForType

PK Cat. No.

396639503980

3031 / 3011 to 30183005 / 30063019 / 3020 / 3033

111

9.837 9369.837 9729.837 980

2

Clamps for Erlenmeyer FlasksStainless steel, for screwing onto shaking tray 3950, 3966 and 3980, supplied withattachment fittings (see also Shaking Incubators 3031-3033).

3GFL

Type Forflasks

Clips requiredshaker Model



PK Cat. No.

ml 3005, 3006 3011 to 3018 3019, 302039833984398539863987398839893990

2550

100200

250-300500

10002000

452516129942

79493622161294

999950262626129

11111111

9.837 9839.837 9849.837 9859.837 9869.837 9879.837 9889.837 9899.837 991

Other clamps on request

3www.wen

k-lab

tec.co

m

www.wenk-labtec.com

498



E & OE.

Test tube rackFor Shakers 3005 and 3006, 3015 to 3020 and Shaking Incubator 3031 (Tray 3966),3032 (Tray 3970/3 racks) and 3033 (Tray 3980).Stainless steel, for max. 24 test tubes, 12mm to 17mm diameter, perforated section can be tilted by 90°, with clampingsprings for secure grip and silent shaking of tubes. For screwing onto shaking trays 3950, 3966 and 3980.

1GFL

For trays: Number of racks:3950 33966 63980 9

Type PK Cat. No.

3953 1 9.837 974

1

Clamps for Separating FunnelsStainless steel, for screwing onto base trays 3950 and 3966.

2GFL

Type Capacity Max. clipsper platform

Neckwidth

PK Cat. No.

ml39573958395939553956

50100250250500

6 / 116 / 114 / 84 / 83 / 6

19 / 26 (ISO / Squibb)19 / 26 (ISO / Squibb)19 / 26 (ISO / Squibb)29 / 32 (ISO / Squibb / conical)29 / 32 (ISO / Squibb)

11111

9.837 9759.837 9769.837 9779.837 9709.837 978

Other clamps on request

2

Non-slip MatsUsed as a shaking platform. For the slow moving of e.g. nutrient media solutions in Petridishes and flasks. Type 3965 also for Shaking Incubator 3031.

3GFL

Type ForType

Width Length PK Cat. No.

mm mm39513965

3005 / 30063011 - 3018 / 3031

300420

300420

11

9.837 9719.837 935

3

Universal MountsFor secure attachment of various shaking vessels.Type 3952 for Shakers 3005 and 3006. With 4 rubber coated bars.

Type 3967 for Shakers 3011/3012, 3013/3014, 3015/3017, 3016/3018 (see also Shaking Incubator 3031). With 6 rubber coated bars.

Type 3982 for Shakers 3019/3020. It consists of 2 longitudinal bars and 6 transverse bars. Screw-type clamps are used for adjusting the longitudinal bars vertically and the transverse bars horizontally.

4GFL

Type ForType

PK Cat. No.

395239673982

3005 / 30063011 - 3018 / 30313019 / 3020

111

9.837 9739.837 9379.837 982

4

Rack FrameFor Shakers 3019/3020.For doubling the capacity by accomodating 2 shaking trays 3980. Distance betweentrays 205 mm. The bottom tray can be loaded with flasks up to a max. of 500 ml.

5GFL

Type ForType

PK Cat. No.

3981 3019 / 3020 1 9.837 981

5www.w

enk-l

abtec

.com

www.wenk-labtec.com

499



E & OE.

Orbital shaker KS501 digitalLow-profile laboratory shaker with large platform and 15kg load capacity. With continuouslyadjustable speed range: 0 to 300 rpm, digital display and timer. Continuous operation isguaranteed even under extreme loads. Requires accessory attachments for operation (these are not supplied)

Ideally suited for vessel sizes over 250 ml, e.g. round bottom flasks, erlenmeyer flasks, culture flasks, bottles etc.Developed for biological and microbiological growth tests and for production of stock solutions.

1IKA

SpecificationsType of movement: orbitalOrbit: 30 mmMax. Load (incl. attachment): 15 kgMotor rating input/output: 70/19 WSpeed range: 0 to 300 rpmTimer: 0 to 56 min./continuousInterface: RS 232Dimensions (W x D x H): 505 x 585 x 120 mmWeight (without attachment): 26 kgProtection class acc. to DIN EN 60529: IP 21Supply requirements: 230 V, 50/60 HzTested to DIN EN IEC 61010-1.

Type PK Cat. No.

KS 501 digital 1 6.285 448Optional accessories: Shaking attachments: AS 501.1, AS 5014, AS 501.5, Non-slip mat STICKMAX

1

Shakers, KS/HS501 digital, accessoriesFor orbital shaker Ika KS501 digital and reciprocating shaker Ika HS501 digital.

AS 501.1 Universal attachmentFor a variety of vessels (flasks, beakers etc.) with volumes of at least 50 ml (ideally greater than 250 ml). With tension rollers that can be mounted on 2 levels.Usable area: 420 mm x 420 mm.Dimensions (W x D x H) 480 mm x 500 mm x 120 mm.

AS 501.4 Gridded clip attachment(Without spring clips). For shaking round bottom, flat-bottom, pear-shaped, volumetric and erlenmeyer flasks etc. Minimum volume 25 ml. Dimensions (W x D x H) 475 mm x 460 mm x 95 mm, weight 2640 g.Capacity: Number of fixing clips (volume held) 110 x AS 2.1 (25ml), 55 x AS 2.2 (50 ml), 35 x AS 2.3 (100 ml), 16 x AS 2.4 (250 ml), 12 x AS 2.5 (500 ml), 8 x AS 2.6 (1000 ml)

AS 501.5 Dish attachmentFor the gentle movement of petri dishes, but also suitable for gentle mixing in vessels with large, flat bottoms (wide mouth erlenmeyers, beakers). Fitted with a non-slip, plastic mat. Dimensions (W x D x H) 450 mm x 450 mm x 45 mm, weight 1120 g. 4 clamping devices with rod AS 1.7.Suitable for 4 x 500 ml, 3 x 1000 ml or 2 x 2000 ml separating funnels.

Further accessories on request.

234

IKA


AS 501.1AS 501.4AS 501.5

Universal attachmentGridded clip attachment*Dish attachment

111

9.838 0469.838 0509.838 049

* Clips AS 2.1 (9.838 091), AS 2.2 (9.838 092), AS 2. 3 (9.838 093), AS 2.4 (9.838 094), AS 2.5 (9.838 095) please order separately.

2

9.838 046

3

9.838 050

4

9.838 049

www.wen

k-lab

tec.co

m

www.wenk-labtec.com

500



E & OE.

Orbital shaker LLG-uniSHAKER 25Powerful, smooth running orbital shaker for loads up to 25 kg. The maintenance free brushless motor and the shakingmechanism with counter weight allow any time smooth and stable operation. Digital display for speed and time.Adjustable speed from 50 to 500 rpm, built-in timer from 1 to 99 minutes or continuous. Two different platforms (610 x 460 mm or 760 x 460 mm) and 7 clamps for vessels from 25 to 2000 ml available. Platforms and clamps mustbe ordered separately.

- Stable and robust metal housing- Maximum load capacity 25 kg- Shaking orbit 25 mm- Different platforms and clamps available

1 2

SpecificationsType of movement: orbitalOrbit: 25 mmSpeed range: 50 to 500 rpmMax. Load: 25 kgMotor: brushless DC motorTimer: 0 - 99 minutes, continuousPower consumption: 250 VAPermissible ambient temperature: 4 to 75 °CDimensions (W x D x H): 600 x 550 x 150 mmWeight: 48 kgPower supply: 230 V, 50 HzWarranty: 3 years

Type PK Cat. No.

LLG-uniSHAKER 25 with EU-plugLLG-uniSHAKER 25 with UK-plugUniversal attachment, 610 x 460 mmUniversal attachment, 610 x 460 mm, with securing barsUniversal attachment, 760 x 460 mmClamp, 25 mlClamp, 50 mlClamp, 100 mlClamp, 250 mlClamp, 500 mlClamp, 1000 mlClamp, 2000 mlAdhesive rubber mat, blue, 150 x 150 x 3 mm

1111111111112

6.263 5906.263 5996.263 5916.263 5896.263 5926.263 6996.263 7006.263 5936.263 5946.263 5956.263 5966.263 5976.263 598

1

2

Multi-Flask Shaker VKS 75 controlBig heavy-duty shaker for high loads also during continuous operation (floor installation only).Further accessories on request.

Scope of supply: Basic device without shaking plate, without rack system With digital display and programmable control.

3Bühler

Speed range: 30 to 200 rpm steplessOrbit or stroke: 26 mm (model A)

50, 36, 60 or 80 mm (model B)Max. loading: max. 75 kgPlatform (W x D): 760 x 600 mmOverall (W x D x H): 1050 x 835 x 250 mmWeight: 110 kgSupply requirements: 230 V, 50/60 Hz, 125 W

Type PK Cat. No.

VKS 75 A controlVKS 75 B controlShaking plate VKS (1-storey)Rack system Combifix VKS, Set ARack system Combifix VKS, Set BUniversal tray VKS (1-storey, without spring clamps)

111111

9.838 4009.838 4039.838 4059.838 4119.838 4129.838 451

3

www.wen

k-lab

tec.co

m

www.wenk-labtec.com

501



E & OE.

Universal shakers, SM 30 series /SM 30 controlPowerful shakers for large loads. Choice of orbital or reciprocating action models.Suitable for continuous operation. For analytical or diagnostic processes in biology, chemistry or pharmacy, plant culture or in the foodindustry, e.g. for transport simulations. Various attachments for different requirements are available as accessories. Programmable controller with advancedfeatures for control devices.

Scope of supply: supplied with shaking rack and rubber mat.

Attachments required, please order separately.

1 2Bühler

Speed range: 15 to 300 rpm.with stepless, electronic adjustment

Orbit or travel: 26 mm (A + C models)30, 46 or 50 mm (B models)

Max. loading: 30 kgTimer: Programmable/continuous operation ("control" devices) or 0 to 120 mins.

or continuous operation (rest of range)Platform (W x D): 560 x 400 mmOverall (W x D x H): 680 x 610 x 160 mmWeight: 33 kgSupply requirements: 230 V, 50/60 Hz, 35 W


SM 30 ASM 30 BSM 30 CSM 30 A controlSM 30 B controlSM 30 C control

OrbitalReciprocatingOrbital/reciprocating switchableOrbital / digital displayReciprocating / digital displayOrbital / reciprocating switchable, digital display

111111

9.838 1019.838 1119.838 1159.838 1219.838 1319.838 135

1 2

Accessories for universal shaker SM 303 4Bühler

Type PK Cat. No.

Rack system Combifix SM, Set ARack system Combifix SM, Set BRack system Combifix SM, Set CUniversal tray SM (without spring clamps)Sliding plate for top frame with Combifix SM, Set ASliding plate for top frame with Combifix SM, Set BSliding plate for top frame with Combifix SM, Set CMounting set for universal trays or sliding plates2-storey top frame SM (without platforms)2-storey top fram SM/TH (for using SM with TH)Incubator Hood TH 30

11111111111

9.838 2019.838 2059.838 2089.838 2106.231 5766.285 1906.285 1916.255 2389.838 2116.510 5729.838 470

3 4www.wen

k-lab

tec.co

m

www.wenk-labtec.com

502

4. Stirring, Shaking, MixingShakers and mixers/Reciprocating shakers


E & OE.

Reciprocating shakers RS-LS seriesA compact shaker with ideal swivel motion. The shakers can be set up individually byusing the comprehensive range of accessories.

Features at a glance RS-LS10/20:- compact shaker for a maximum shaking weight of 2.5 and 7.5 kg- Backlight LCD display for speed and timer adjustment.- Speed, time and operating mode can be viewed simultaneously- Comprehensive accessories- Electronic time switching clock: control time or continuous operation mode- PC control via RS232 interface, the special Shaker PC software can realise the setting of instrument

parameters on the PC and the display of working curves real-time.- 2 years warranty

Please order attachments and further accessories separately.

1Phoenix Instrument

SpecificationsType of movement: reciprocalShaking diameter: 10 mmMax. Load RS-LS10/ RS-LS 20: 2.5 kg / 7.5 kgVoltage: 100 to 240 VAC, 50/60 HzPower consumption: 30 WSpeed display: digitalInterface: RS 232Housing IP rating IP 21

Type Dimensions Rotationspeed

Max.Load

Weight PK Cat. No.

mm rpm kg kgRS-LS 10RS-LS 20

340 x 300 x 100420 x 370 x 100

100-350100-350

2.57.5

8.113.5

11

9.852 1229.852 123

1

Accessories linear and orbital shaker RS-OS/RS-LR series2Phoenix Instrument


RSS-E 100RSS-E 110RSS-E 200RSS-E 220

universal attachment with clamping rolls for OS/LS 10universal attachment with vertical adjustable clamping rolls for OS/LS 10universal attachment with clamping rolls for OS/LS 20dish attachment with tensioning belt for OS/LS 20

1111

9.852 1259.852 1279.852 1299.852 146

2

Komto shaker KL 2Mini shaker which can be switched between orbital and reciprocating motions. Includes flask attachment system with 3 clamping rollers. Versatile, for use in medicaldiagnostics, haemotology, for cell cultivation or analysis.

Scope of supply: Shaker and accessory platform with 3 clamping rollers and anti-slip mat.

3Bühler

Speed range: 30 to 420 rpm. with stepless electronic adjustment8 mm

Max. loading: 2 kgPlatform (W x D): 300 x 300 mmOverall (W x D x H): 355 x 455 x 195 mmWeight: 13.5 kgSupply requirements: 230 V, 50/60 Hz, 125 W.

Orbit or stroke:

Type PK Cat. No.

Komto shaker KL 2 1 9.838 320

3

www.wen

k-lab

tec.co

m

www.wenk-labtec.com

503



E & OE.

Reciprocating shakers, large platform, SSL2- available with orbital or reciprocating action- digital speed selection up to 250 rpm with soft start- built-in digital timer- reliable, quiet running mechanism- fully adjustable cradle system

This lab scale platform shaker has powerful yet quiet shaking mechanisms and has been designed for trouble-free,continuous use. The cradle type platforms have four rubber cushioned horizontal securing bars which can be easilyadjusted both vertically and horizontally to hold most sizes and types of vessel, including flasks, bottles and beakers.For example, they will accommodate the following Erlenmeyer flasks or bottles: 12 x 250 ml or 9 x 500 ml or 6 x 1000 ml or 2 x 2000 ml. Speed is continuously adjustable and is set digitally. The speed is accurately maintained,even over long runs. A built-in digital timer allows shaking times from 1 to 999 minutes to be set. Alternatively the unitcan be set for continuous operation. With BioCote silver based antimicrobial protection.

1Stuart

SpecificationsType of movement: reciprocalShaking diameter: 20 mmSpeed range: 25 to 250 rpmMax. Load: 10 kgTimer: 1 to 999 minPower consumption: 50 WWorking temperature: 4 to 40 °CPlatform dimensions (W x D): 335 x 335 mmOverall dimensions (W x D x H): 360 x 420 x 270 mmNet weight: 11 kgSupply requirements: 230 V, 50 Hz


PK Cat. No.

kgSSL2 Shaker, reciprocating, large platform 10.0 1 9.728 841

1

Shakers, 3000 seriesHousing made of high impact strength polystyrene, finished in off-white. The base plate ismade of electrolytically galvanized, powder-coated sheet steel, the shaking platform ofanodised aluminium, equipped with four plastic pins (models 3005 to 3018 and 3023) for secure attachment ofaccessory equipment (holds almost all shapes of vessels used in standard laboratory applications). Models 3019/3020: Shaking platform made of electrolytically galvanized, powder-coated sheet steel, equipped with foursupport rods with screw-type clamps made of stainless steel. Clearly laid out control panels for easy operation and ana.c. motor with overload protection drives the unit. Stepless, electronic speed control, with soft-start and quietoperation. Constant speed maintained during continuous operation, independent of load. Suitable for use inlaboratories, incubation and controlled environment rooms at ambient temperatures between +10 and +50 °C. The devices are maintenance-free and have the CE mark.Analogue control models (1)3005/3006/3015/3016/3019/3023.Timer for operations up to 60min. and continuous operation.Digital control models (2)3017/3018/3020.Microprocessor controlled, with interface RS 232. Timer: 1 min. up to 99:59 h or continuous operation. Speed and remaining time indicated by two LCD readouts.

The following shaker types are available: Orbital shakers, reciprocating shakers, rocking shakers, tumblingshakers and overhead shakers. Please see the different motion types of the 3000 series shakers in therelevant chapters.

2 3GFL

2

3

Reciprocating shaker 3006For gentle back and forth motion as well as intensive shaking of liquids, especially inseparating funnels. Applications are in medical diagnostics or analysis, as well as for culturingmicro-organisms, cell and tissue cultures. The stable, low-friction, counterbalanced drive mechanism ensures a reliable,continuous operation.

4GFL

SpecificationsType of movement: reciprocalShaking diameter: 20 mmSpeed range: 20 to 300 rpmMax. Load: 8 kgPlatform (W x D): 380 x 510 x 140 mmOverall (W x D x H): 330 x 330 mmSupply requirements: 230 V, 50/60 Hz, 65 WNet/gross weight: 10/12 kgTimer: up to 60 min. or continuous operation

Type Max.Load

PK Cat. No.

kg3006 8.0 1 9.837 906

4

www.wen

k-lab

tec.co

m

www.wenk-labtec.com

504



E & OE.

Reciprocating shakers 3016 and 3018For vigorous and intensive shaking e.g. of clamped, recumbent flasks, mixing flasks orseparating funnels. Quiet operation. The shaking platform's jerky, back and forth motioncreates high turbulence, thus thoroughly mixing the media, e.g. when producing suspensions and emulsions.Applications are varied, e.g. medical diagnostics, foodstuffs or environmental analyses. Compact, low-wear,counterbalanced drive mechanism for reciprocal shaking motion. (3018 supplied with RS 232 interface)

1GFL

SpecificationsType of movement: reciprocalShaking diameter: 30 mmSpeed range: 20 to 300 rpmMax. Load: 15 kgPlatform (W x D): 450 x 450 mmOverall (W x D x H): 510 x 625 x 145mmNet/gross weight: 18/22kgSupply requirements3016: 230 V, 50/60 Hz, 65 W3018: 230 V, 50 or 60 Hz, 65 W*Timer:3016: Up to 60 min. or contiunous operation3018: 1 min. up to 99:59 h. or continous operation

Type Max.Load

PK Cat. No.

kg30163018**

15.015.0

11

9.837 9169.837 918

* Please specify when placing your order!**Speed and remaining time indicated by 2 LC-displays.

1

Accessories for Model 3006/3016/3018 - please see page 497.

Reciprocating shaker HS 501 digitalLow-profile laboratory shaker with large platform and 15 kg load capacity. With continuouslyadjustable speed range: 0 to 300 rpm, digital display and timer. Continuous operation isguaranteed even under extreme loads. Requires accessory attachments for operation (these are not supplied). Ideally suited for flasks, measuring cylinders and particularly separating funnels. Developed for universal applications.

2IKA

SpecificationsType of movement: reciprocalShaking diameter: 30 mmMax. Load (with attachment): 15 kgMotor rating input/output: 70/19 WSpeed range: 0 to 300 rpmTimer: 0 to 56 mins./continuousDimensions (W x D x H): 505 x 585 x 120 mmWeight (without attachment): 26 kgProtection class acc. to DIN EN 60529: IP 21Supply requirements: 230 V, 50/60 HzTested to DIN EN IEC 61010-1.

Type Max.Load

PK Cat. No.

kgHS 501 digital 15.0 1 6.270 850

2

Accessories for Model HS 501 - please see page 499.

www.wen

k-lab

tec.co

m

www.wenk-labtec.com

505



E & OE.

Flask shaker SF1Creates a vigorous shaking action. With clamps to accept 8 flasks up to 500 ml capacity.With stepless variable speed control from 80 to 800 oscillations/min. and 10 to 60 minute timer withoff and continuous run settings. Electronic feedback control ensures a constant speed irrespective of the load.

Overall 780 x 270 x 240 mm (W x D x H). Weight 8.3 kg. For 230 V, 50 Hz single phase supplies.

Accessory side-arms are available for converting 9.950 372 to shake up to 12 flasks. Maximum load: 3 L. Each side arm accepts six clamps. Supplied with 4 clamps.


1Stuart

Type PK Cat. No.

SF1Spare clampAccessory side arm

111

9.950 3729.950 3739.950 374

1

Universal shakers, SM 30 series /SM 30 controlPowerful shakers for large loads. Choice of orbital or reciprocating action models.Suitable for continuous operation. For analytical or diagnostic processes in biology,chemistry or pharmacy, plant culture or in the food industry, e.g. for transport simulations. Various attachments fordifferent requirements are available as accessories. Programmable controller with advanced features for controldevices.

Scope of supply: supplied with shaking rack and rubber mat.Attachments required, please order separately.

2 3Bühler

Speed range: 15 to 300 rpm.with stepless, electronic adjustment

Orbit or travel: 26 mm (A + C models)30, 46 or 50 mm (B models)

Max. loading: 30 kgTimer: Programmable/continuous operation ("control" devices) or 0 to

120 mins. or continuous operation (rest of range)Platform (W x D): 560 x 400 mmOverall (W x D x H): 680 x 610 x 160 mmWeight: 33 kgSupply requirements: 230 V, 50/60 Hz, 35 W


SM 30 ASM 30 BSM 30 CSM 30 A controlSM 30 B controlSM 30 C control

OrbitalReciprocatingOrbital/reciprocating switchableOrbital / digital displayReciprocating / digital displayOrbital / reciprocating switchable,digital display

111111

9.838 1019.838 1119.838 1159.838 1219.838 1319.838 135

2

3

Accessories for universal shaker SM 304 5Bühler

Type PK Cat. No.

Rack system Combifix SM, Set ARack system Combifix SM, Set BRack system Combifix SM, Set CUniversal tray SM (without spring clamps)Sliding plate for top frame with Combifix SM, Set ASliding plate for top frame with Combifix SM, Set BSliding plate for top frame with Combifix SM, Set CMounting set for universal trays or sliding plates2-storey top frame SM (without platforms)2-storey top fram SM/TH (for using SM with TH)Incubator Hood TH 30

11111111111

9.838 2019.838 2059.838 2089.838 2106.231 5766.285 1906.285 1916.255 2389.838 2116.510 5729.838 470

4

5

www.wen

k-lab

tec.co

m

www.wenk-labtec.com

506

4. Stirring, Shaking, MixingShakers and mixers/Rocking shakers


E & OE.

Rocking shaker Rocker 2D basic/2D digitalRocking shaker with fixed speed for smooth mixing tasks. For homogeneous mixing in flasks, culture flasks, Petri dishes and tubes.Even with load and voltage fluctuations the shaking speed remains constant. A fixed tilt angle ensures reproducible test results.

- Different attachments allow a variety of applications- Usable at 4 to 50 °C in incubators- Anti-slip rubber mat included- Easy operation by foil keypad- Suitable for continuous operation

Rocker 2D digital only:- Timer: Countdown, adjustable from 1 s to 99 h 59 min- Counter: Display of shaking time- Error code display

1

IKA

SpecificationsType of movement: rockingRocking angle Rocker 2D basic/2D digital: 8° / 0 - 15°Max. Load (incl. attachment): 2 kgMotor rating input/output: 16/9 WSpeed range: 5 to 80 rpmSpeed display: 7 segment LEDDimensions (W x D x H): 280 x 330 x 150 mmWeight: 2.2 kgProtection class acc. to DIN EN 60529: IP 21Power supply: 100-240 V, 50/60 Hz

Type Max.Load

PK Cat. No.

kgRocker 2D basicRocker 2D digital

2.02.0

11

9.729 9849.729 985

1

9.729 984

Rocking shaker 35 EZThe Rocker 35 EZ is the next generation large capacity rocker from Labnet. This upgraded Rocker 35 is designed for durability inlaboratories requiring a larger platform area and precise control over rocking parameters. It is backed by a 5 year warranty. Bothspeed and time are easily selectable and the analog control has been upgraded to display discreet values. The tilt is now easily adjustable with knob on side.This system can easily handle up to 5 kg of load so a double platform can be fully loaded without any variation to speed. This unit comes in both single and dualplatform models and includes a ribbed non-slip rubber mat to keep containers in place.

2

Labnet

SpecificationsType of movement: rockingRocking angle: adjustable, ±20°Max. Load (incl. attachment): 5 kgTimer: 10 to 120 min or continuousSpeed range: 10 to 120 rpmPower: 6 WDimensions (W x D x H )single/double platform: 360 x 360 x 170 mm/360 x 360 x 260 mmWeight single/double platform: 6.5 kg/7.8 kgPower supply: 230 V, 50/60 Hz

Description Max.Load

PK Cat. No.

kgSingle platformDouble platform

5.05.0

11

6.283 2966.283 298

2

6.283 296

www.wen

k-lab

tec.co

m

www.wenk-labtec.com

507

4. Stirring, Shaking, MixingShakers and mixers/Rocking shakers


E & OE.

Rocking Shaker, Mini, SSM4This compact rocker is ideal where gentle mixing is required. It has a see-saw rocking action that creates a wave motion withinvessels such as culture flasks, Petri dishes etc.- Small space saving design, ideal for personal use- Gentle rocking action- Digital speed control and built-in timer- Optional tier system available to increase capacity- supplied with a non-slip mat- digital selection of both speed and time

An accessory tier system is available. Fitted in seconds, without the need for tools, it triples the available space for samples.


1Stuart

SpecificationsType of movement: rockingRocking angle: 7°Angle adjustable: NoSpeed range: 5 to 70 rpmMax. Load: 3 kgPlatform dimensions (W x D): 235 x 235 mmOverall dimensions (W x D x H): 240 x 300 x 150 mmNet weight: 5 kgPower supply: 230 V, 50 Hz, 50 W


PK Cat. No.

kgSSM4 Rocker, see-saw, mini 3.0 1 9.728 821

1

Rocking shaker SSL4, large platform- Large platform rockers - ideal for multiple users- Gentle rocking action- Digital speed control and built-in timer- Optional tier system available to increase capacity- incl. non-slip mat

This rocker has large platform able to accommodate a number of samples, ideal for a busy lab. It is very quiet in operation and designed to be run continuously.

The see-saw rocking action creates a wave motion within vessels such as culture flasks, petri dishes etc.

An accessory tier system is available. Fitted in seconds, without the need for tools, it triples the available space for samples.With BioCote, silver-based, antimicrobial protection.

Stuart

SpecificationsType of movement: rockingRocking angle: 7°Angle adjustable: NoSpeed range: 5 to 70 rpmMax. Load: 10 kgPlatform dimensions (W x D): 355 x 355 mmOverall dimensions (W x D x H): 360 x 420 x 160 mmNet weight: 10 kgSupply requirements: 230 V, 50 Hz, 50 W

2

9.728 801

2


PK Cat. No.

kgSSL4SSL3/1

Rocker, see-saw, lab scaleTier system (2 platforms plus 8 bars)

10.0 11

9.728 8019.728 802

Attachments are not included - Please order separatelywww.wen

k-lab

tec.co

m

www.wenk-labtec.com

508

4. Stirring, Shaking, MixingShakers and mixers/Rocking shakers-Tumbling shakers


E & OE.

Rocking shaker PMR-100Large capacity, adjustable angle and speed platform rocker, providing soft or intensive side toside rocking for optimal mixing of samples. For use in cold rooms or incubators with ambientoperating temperature range +4 to +40 °C. Continuous or timed operation, with automatic switch-off. Integral timer: 1 min to 99 h 59 min.

1Grant

SpecificationsType of movement: rockingRocking angle (adjustable): 0 to 10° (fixed at 10° over 50 rpm)Max. Load (incl. attachment): 5 kgPower consumption: 13 WSpeed range: 1 to 99 rpmSpeed display: LCDDimensions platform (W x D x H): 460 x 360 mmDimensions (W x D x H): 400 x 480 x 250 mmWeight: 12 kgProtection class acc. to DIN EN 60529: IP 20Power supply: 12 V

Type Max.Load

PK Cat. No.

kgPMR-100 5.0 1 9.721 015

1

Tumbling Shaker LLG-uniSHAKER 2Multi-functional shaker with dimpled mat, perfect for foam-free mixing of blood and other biological samples incentrifuge tubes. Suitable for a variety of tubes and dishes.

2

SpecificationsType of movement: tumblingTumbling angle: 20°Speed: fixed, 20 rpmMax. Load: 1.6 kgAmbient Temperature: 4 to 45 °CPlatform Dimensions (W x D): 202.5 x 152.5 mmDimensions (W x D x H): 202.5 x 152.5 x 202.5 mmWeight: 2 kgPower supply: 230 V, 50 Hz, 0.2 AWarranty: 3 years

Type PK Cat. No.

LLG-uniSHAKER 2 with EU-plugLLG-uniSHAKER 2 with UK-plug

11

6.263 6406.263 641

2

Platform tumbling shaker PMR-30Smooth rocking motion for gentle sample agitation in tubes, culture flasks, dishes and boxes.Continuous or timed operation with automatic switch-off.

3Grant

SpecificationsType of movement: tumblingTumbling angle: 7°Speed range: 5 to 30 rpmMax. Load: 1.0 kgTimer: 1 min to 23 h 59 minAmbient Temperature: +4 to 40 °CDimensions Platform (W x D): 210 x 210 mmDimensions (W x D x H): 220 x 205 x 120 mmWeight: 2 kgPower supply: 12 V

Type Max.Load

PK Cat. No.

kgPMR-30 0.5 1 9.721 011

3

www.wen

k-lab

tec.co

m

www.wenk-labtec.com

509

4. Stirring, Shaking, MixingShakers and mixers/Tumbling shakers


E & OE.

Platform tumbling shaker PS-3DSmooth tumbling orbital motion for mixing in tubes, fixed tilt, culture flasks, dishes and boxes. Ideal size for personal use.

1Grant

SpecificationsType of movement: tumblingTumbling angle: 7°Speed range: 5 to 60 rpmMax. Load: 1.0 kgAmbient Temperature: +4 to 40 °CDimensions Plattform (W x D): 215 x 215 mmDimensions (W x D x H): 85 x 150 x 80 mmWeight: 1.2 kgPower supply: 12 V

Type Max.Load

PK Cat. No.

kgPS-3D 0.5 1 9.721 014

1

Multi-function tumbling shaker PS-M3DWith consistent and reproducible agitation throughout the speed range, multi segmentprogram.

2Grant

SpecificationsType of movement: orbital (diam. 22 mm)

reciprocal (0 to 360°, 30° steps)vibrating (0 to 5°, 1° steps)

Tumbling angle: 7°Speed range: 1 to 100 rpmMax. Load: 1.0 kgTimer Type of movement orbital and reciprocal/vibrating: 0 to 250 sec/0 to 5 secAmbient Temperature: +4 to 40 °CDimensions Plattform (W x D): 210 x 210 mmDimensions (W x D x H): 225 x 170 x 125 mmWeight: 2 kgPower supply: 12 V

Type Max.Load

PK Cat. No.

kgPS-M3D 1.0 1 9.721 017

2

Tumbling shakers Rocker 3D basic/3D digitalShaker with three-dimensional tumbling motion and a fixed speed for smooth mixing tasks. A fixed angle ensures reproducible test results.- Different attachments allow a variety of applications- Usable at 4 to 50 °C in incubators- Anti-slip rubber mat included- Easy operation by foil keypad- Suitable for continuous operation

Rocker 3D digital only:- Timer: Countdown, adjustable from 1 s to 99 h 59 min- Counter: Display of shaking time- Error code display

3

IKA

SpecificationsType of movement: tumblingTumbling angle Rocker 3D basic/3D digital: 8°/0 - 15°Max. Load (incl. attachment): 2 kgMotor rating input/output: 16/9 WSpeed range Rocker 3D basic/3D digital: 30 rpm (fixed)/5 to 80 rpmSpeed display (Rocker 3D digital only): 7 segment LEDDimensions (W x D x H) Rocker 3D basic/3D digital: 280 x 330 x 165 mm / 280 x 330 x 185 mmWeight: 2.2 kgProtection class acc. to DIN EN 60529: IP 21Power supply: 100-240 V, 50/60 Hz

Type Max.Load

PK Cat. No.

kgRocker 3D basicRocker 3D digital

2.02.0

11

9.729 9869.729 987

3

9.729 986

www.wen

k-lab

tec.co

m

www.wenk-labtec.com

510

4. Stirring, Shaking, MixingShakers and mixers/Tumbling shakers


E & OE.

Tumbling Shaker, Mini, SSM3Ideal for low foaming agitation, DNA extractions, staining and de-staining procedures etc. The tilt angle can be adjusted to any position by hand to optimise mixing of vessels. This compact rocker is ideal where gentle mixing is required.- Small space saving design, ideal for personal use- Gentle rocking action- Digital speed control and built-in timer- Optional tier system available to increase capacity- supplied with a non-slip mat- digital selection of both speed and time

An accessory tier system is available. Fitted in seconds, without the need for tools, it triples the available space forsamples.


1Stuart

SpecificationsType of movement: tumblingTumbling angle: 3 to 12°Angle adjustable: Yes by handSpeed range: 5 to 70 rpmMaximum load: 3 kgPlatform dimensions (W x D): 235 x 235 mmOverall dimensions (W x D x H): 240 x 300 x 165 mmNet weight: 5 kgPower supply: 230 V, 50 Hz, 50 W


PK Cat. No.

kgSSM3 Rocker, gyratory, mini 3.0 1 9.728 820

1

Tumbling shaker SSL3, large platform- Large platform rocker - ideal for multiple users- Gentle rocking action- Digital speed control and built-in timer- Optional tier system available to increase capacity- incl. non-slip mat

This rocker has a large platform able to accommodate a number of samples, ideal for a busy lab. Designed to be runcontinuously, they are very quiet in operation. The tumbling gyratory motion is ideal for low foaming agitation, DNAextractions, staining and de-staining procedures etc. The tilt angle can be adjusted to any position by hand to optimisemixing of vessels.

An accessory tier system is available. Fitted in seconds, without the need for tools, it triples the available space forsamples.


Stuart

SpecificationsType of movement: tumblingTumbling angle: 3° to 12°Angle adjustable: Yes by handSpeed range: 5 to 70 rpmMax. Load: 10 kgPlatform dimensions (W x D): 355 x 355 mmOverall dimensions (W x D x H): 360 x 420 x 170 mmNet weight: 10 kgSupply requirements: 230 V, 50 Hz, 50 W

2

9.728 800

2


PK Cat. No.

kgSSL3SSL3/1

Rocker, gyratory, lab scaleTier system (2 platforms plus 8 bars)

10.0 11

9.728 8009.728 802

Attachments are not included - Please order separately

www.wen

k-lab

tec.co

m

www.wenk-labtec.com

511

4. Stirring, Shaking, MixingShakers and mixers/Thermoshakers


E & OE.

Thermo shaker LLG-uniTHERMIX 1 and 2The LLG-uniTHERMIX is ideal for shaking and temperature control of a variety of tubes or plates (depending on the block used). With its high temperarture uniformity, fast heating rate and excellent mixing resultsthe LLG-uniTHERMIX is perfect for the incubation of samples of any kind, in particular for Life Science applications,e.g. Enzyme reactions, transformations, denaturation of DNA and RNA.- Precise temperature control system- Temperatures up to 100 °C- Temperature accuracy of ±0.5 °C (20 to 45 °C)- Efficient mixing up to 1500 rpm (depending on the heating block)- Up to 9 storable programs- Many block options available (see below)- Automatic block recognition

LLG-uniTHERMIX 1: with shaking and heating function,Temperature range: RT +5 °C to approx. +100 °C

LLG-uniTHERMIX 2: with shaking, cooling and heating function, Temperature range: 15 °C below RT to approx. +100 °C

Blocks must be ordered separately.

1

SpecificationsTemperature rangeLLG-uniTHERMIX 1: RT +5 °C to approx. +100 °CLLG-uniTHERMIX 2: 15 °C below RT to approx. +100 °CTemperature control: ±0.5 °C (at 20 to 45 °C)Uniformity: Max. ±0.5 °C (at 20 to 45 °C)Max. heating rate: 5.5 °C/minMax. cooling rate (LLG-uniTHERMIX 2 only): 5 °C/min (100 °C to RT)

0.5 °C/min (below RT)Speed range: 300 to 1500 rpmOrbit: 3 mmDisplay: LCDPrograms: 6 stages, 9 programsTimer: 1 to 99 min or continuousCapacity: 1 exchangeable block*Dimensions (W x D x H): 200 x 235 x 120 mmWeight: 7.3 kgElectrical heating/cooling power: 200 WPower supply: 220-240 V, 50/60 HzWarranty: 3 years

Type PK Cat. No.

LLG-uniTHERMIX 1 with EU-plugLLG-uniTHERMIX 1 with UK-plugLLG-uniTHERMIX 2 with EU-plugLLG-uniTHERMIX 2 with UK-plug

1111

6.263 4706.263 4716.263 4726.263 473

*Exchangeable blocks are not included in delivery.

1

Heating blocks for Thermo shaker LLG-uniTHERMIX 1 and 2

2

For PK Cat. No.

96 well PCR plates non-skirted, 0.2 ml tubes*96/384 micro plate*24 tubes, 0.5 ml*24 tubes, 1.5 ml*24 tubes, 2.0 ml*8 tubes, 5 ml8 tubes, 15 ml, max. 800 rpm4 tubes, 50 ml, max. 600 rpm

11111111

6.263 4746.263 4806.263 4756.263 4766.263 4776.263 4816.263 4786.263 479

*with lid

2

6.263 476

www.wen

k-lab

tec.co

m

www.wenk-labtec.com

512



E & OE.

Thermoshaker PCMT for microtubes and PCR platesVariable speed, variable temperature heating and cooling thermoshaker with a choice of blocks formicrotubes and microplates. The PMCT can cool down to 15 °C below ambienttemperature.- Fast heat-up and cooling times- Temperature setting range +4 °C to +100 °C- Temperature control range 15 °C below ambient to +100 °C- Shaking speed: 250 to 1400 rpm- Temperature uniformity at 37 °C: ±0.1 °C- Choice of 5 interchangable blocks

Block is required and not included in delivery. Please order separately.

Applications:- Genetic analyses, extraction of DNA, RNA and further sample preparation- Biochemical studies of enzymatic reactions and processes- Extraction of metabolites from cellular material

1Grant

Type PK Cat. No.

PCMT 1 9.721 050

1

Accessory blocks for Thermoshaker PCMT

2

Grant


HC24NHC18HC24HC32HC96

24 x 1.5 ml microtubes20 x 0.5 + 12 x 1.5 ml microtubes24 x 2.0 ml microtubes20 x 0.2 + 12 x 1.5 ml microtubes96-well microplates (0.2 ml)

11111

9.721 0739.721 0529.721 0539.721 0549.721 055

2

9.721 052

Microtube thermoshaker PHMTThe PHMT is a compact and versatile thermoshaker, ideal for applications requiring heating and shaking in microtubes and suitable for use in cold rooms and incubators (operating temperature range 4 to 40 °C). It is effectively three instruments in one: a microtube thermoshaker, a compact benchtop incubator without shaking, a microtube shaker without temperature control. By combining themixing operation with the incubation phase, reaction process times and operator workload are reduced and efficiency ofmany procedures is increased, resulting in a higher throughput.- temperature range: ambient +5 to 100 °C- uniformity at 37 °C: ±0.1 °C- shaking speed: 250 rpm to 1400 rpm- timed shaking operation: 1 min to 96 hours- rapid heat-up- continuous or timed operation, with alarm buzzer and automatic switch-off facility- incl. interchangeable block- mixing and incubation phases are combined reducing reaction processing times

Scope of supply: Thermoshaker with one block as indicated. Further blocks on request.

34

Grant


PHMT-PSC18PHMT-PSC32PHMT-PSC24PHMT-PSC24NPHMT-PSC96

20 x 0.5 ml + 12 x 1.5 ml20 x 0.2 ml + 12 x 1.5 ml24 x 2.0 ml24 x 1.5 ml1 x 96 well

11111

6.234 7259.721 0799.721 0419.721 0729.721 080

3

6.234 725

4

9.721 079

www.wen

k-lab

tec.co

m

www.wenk-labtec.com

513



E & OE.

Thermo shaker AccuThermThe AccuTherm is a temperature controlled mixer that uses peltier technology to rapidlyheat and cool precious samples. The combination of heating/cooling with mixing makesthe AccuTherm ideal for many life science research applications in the fields of molecular biology, biochemistry andclinical chemistry. It's compact footprint incorporates an intuitive control panel with a large multicolor display, whichallows users to easily program and view temperature, time and speed settings. Eight interchangeable aluminum blocksaccommodate PCR plates and tubes ranging in size from 0.2 ml to 15 ml.

1

2

3

Labnet

SpecificationsTemperature operation range: Amb. -14 °C to +100 °CTemperature adjustable range: 0 °C to +105 °CAccuracy/resolution: ±0.5 °C/0.5 °CMax. heating time: 6.5 °C/minMax. cooling time: 1.5 °C/minShaking frequency: 300 to 1500 rpmOrbit: 3 mmDimensions (W x D x H): 330 x 166 x 240 mmCapacity: 1 exchangeable block*Weight: 8.5 kgElectrical heating/cooling power: 150 WPower supply: 230 V, 50/60 Hz


Shaking incubator AccuThermBlock A for 40 x 1.5 ml reaction tubesBlock B for 54 x 0.5 ml reaction tubesBlock C for 96 x 0.2 ml reaction tubesBlock D for 24 x 15 ml reaction tubesBlock E, water bath (115 x 73 x 38 mm)Block G for 26 x 0.5 ml and 24 x 1.5 ml reaction tubesBlock H for 40 x 2.0 ml reaction tubesBlock J for 96 well Elisa plates

111111111

6.261 4116.261 6956.261 6966.261 6976.261 6986.261 6996.261 7066.261 7076.261 708

*Exchangeable blocks are not included in delivery.

1

6.261 411

2

6.261 697

3

6.261 708

Shaking Incubators VorTemp™ 56/ 1550VorTemp™ 56 is supplied with interchangeable platforms for microtubes (56 x 1.5 ml tubes, orsmall tubes with adapters) or microplates (accepts standard and deepwell plates, up to 2.0 ml). VorTemp™ 1550 includes platforms for 8 x 50 ml and 18 x 15 ml tubes.The shaker in the VorTemp™ 56 may be turned off, allowing the unit to be used as a static incubator.- shake and incubate samples simultaneously- interchangeable platforms- broad temperature and speed range- intelligent control with digital LED display

4Labnet

SpecificationsTemperature range: Ambient + 5 °C to 99 °CTemperature accuracy: ±0.5 °CSpeed rangeVortemp 56: 200 to 1200 rpmVorTemp™ 1550: 200 to 900 rpmMotion/orbit: Circular/3 mmTimer: 1 to 99 minutes or continuousCapacityVortemp 56: 56 x 1.5/2.0 ml tubes, 4 standard or 2 deep well microplatesVorTemp™ 1550: 18 x 15 ml, 8 x 50 ml tubesDimensions (W x D x H)VorTemp™ 56: 23 x 31 x 23 cmVorTemp™ 1550: 26 x 31 x 31 cmWeightVorTemp™ 56: 11 kgVorTemp™ 1550: 12 kgPower supply: 230 V, 50 Hz or 120 V, 60 Hz


VorTemp™ 56VorTemp™ 1550Additional platform for microtubes

111

9.945 7609.945 7619.945 762

4

www.wen

k-lab

tec.co

m

www.wenk-labtec.com

514



E & OE.

Eppendorf ThermoMixer™ F1.5/Eppendorf ThermoMixer™ FPTo simplify your lab routines. Whether you regularly work with 1.5 mL reaction vesselsor microplates (MTP and DWP), our customized systems offer you the perfect solution foryour special applications. From 4 °C above RT to 100 °C, there are no limits to the application possibilities. The ThermoMixer F1.5 is equipped with block for 1.5 mL reaction vessels and the ThermoMixer FP has a block formicroplates

- Efficient mixing thanks to 2DMix-Control and anti-spill technology- Simple and intuitive operation using predefined temperature keys (37 °C, 42 °C, 56 °C and 95 °C)- Improved temperature homogeneity with the new ThermoTop

1Eppendorf AG

SpecificationsTemperature operation range: min: +4 °C above RT, max: +100 °CTemperature adjustable range: +1 °C/+100 °CAccuracy/Resolution ThermoMixer™ F1.5: ±0.5 °C at +20 to +45 °CAccuracy/Resolution ThermoMixer™ FP: ±1.0 °C at +20 to +45 °CMax. heating time ThermoMixer™ F1.5: 11 °C/minMax. heating time ThermoMixer™ FP: 18 °C/minShaking frequency ThermoMixer™ F1.5: 300 to 1500 rpmShaking frequency ThermoMixer™ FP: 300 to 2000 rpmOrbit: 3 mm orbitalDimensions (W x D x H): 206 x 304 x 131 mmCapacity ThermoMixer™ F1.5: 24 tubes 1.5 mlCapacity ThermoMixer™ FP: Microplates/Deepwell platesWeight ThermoMixer™ F1.5: 6.0 kgWeight ThermoMixer™ FP: 5.8 kgElectrical heating power: 200 W (max.)Power supply: 220-240 V ±10 %, 50/60Hz

Type PK Cat. No.

ThermoMixer™ F1.5ThermoMixer™ FP

11

9.776 9049.776 905

1

Eppendorf ThermoMixer CThe Eppendorf ThermoMixer C combines unique mixing performance with excellenttemperature control to consistently guarantee complete, dependable and reproducibletest results. Improve your assay results by mixing and incubating samples at the same time.- Excellent mixing performance due to unique 2DMix-Control technology- Prevent condensation and improve temperature homogeneity with the new ThermoTop- Ergonomic design- Eppendorf QuickRelease™ Technology for fast and simple block exchange of Eppendorf SmartBlocks™- Highest flexibility thanks to broad choice of exchangeable SmartBlocks™- Heating, mixing and cooling of all common tubes and microplates with a volume range of 5 µl to 50 ml

Now you can control the temperature of your samples with ease: The ThermoTop, with unique condensation protectiontechnology, reliably prevents condensation formation on the tube lid and wall. It also improves temperaturehomogeneity. The Eppendorf ThermoTop does not have a cable connection. It is detected by the device as soon as it ispositioned, via inductive signal transmission, and thermo-regulation starts automatically. The sample temperature is notaffected: optimal sample protection with optimal reaction conditions produce optimal results.

2Eppendorf AG

SpecificationsTemperature operation range: min: 15 °C below RT, max: +100 °CTemperature adjustable range: +1 to +100 °CAccuracy/Resolution: ±0.5 °C at +20 to +45 °CMax. heating time: 6 °C/minMax. cooling time: 2.5 °C/min between +100 °C and RTShaking frequency: 300 to 3000 rpmOrbit: 3 mmDimensions (W x D x H): 206 x 304 x 131 mmCapacity: dependent on Eppendorf SmartBlock™Weight: 6.2 kgElectrical heating power: 200 W (max.)Power supply: 220-240 V ±10 %, 50/60Hz

Type PK Cat. No.

Eppendorf ThermoMixer™ C 1 9.776 902

2

www.wen

k-lab

tec.co

m

www.wenk-labtec.com

515

4. Stirring, Shaking, MixingShakers and mixers/Thermoshakers-Overhead shakers


E & OE.

Exchangeable blocks Eppendorf SmartBlocks™ and accessories for Eppendorf ThemoMixer™ C and ThermoStat C

Exchangeable blocks:Flexibility has never been this easy. Eppendorf offers a variety of SmartBlocks™ for tubes from 5 ml to 50 ml.- Fast and simple block exchange due to Eppendorf Quick Release- Optimized block design guarantees maximum temperature transfer to the sample

Transfer Racks:- Autoclavable transport aid for tubes from 0.5 to 2.0 ml- For transferring up to 24 tubes in/from the heating block at the same time- Offers protection against burns when transferring hot samples

1

1


Eppendorf SmartBlock™ 0.5 mLEppendorf SmartBlock™ 1.5 mLEppendorf SmartBlock™ 2.0 mLEppendorf SmartBlock™ 5.0 mLEppendorf SmartBlock™ 15 mLEppendorf SmartBlock™ 50 mLEppendorf SmartBlock™ 12 mmEppendorf SmartBlock™ cryoEppendorf SmartBlock™ platesEppendorf SmartBlock™ PCR 96Eppendorf SmartBlock™ PCR 384Transfer RackTransfer Rack

24 tubes, 0.5 ml24 tubes, 1.5 ml24 tubes, 2.0 ml8 Eppendorf Tubes®, 5.0 ml8 conical tubes, 15 ml4 conical tubes, 50 ml24 tubes, diam. 11 to 11.9mm24 cryogenic tubes, 1.5 to 2.0 ml, all bottom formsFor micro plates and Deepwell plates, incl. lidPCR plates 96, incl. lidPCR plates 384, incl. lidFor 24 tubes, 0.5 mlFor 24 tubes, 1.5 to 2.0 ml

1111111111111

9.776 9069.776 9079.776 9089.776 9099.776 9109.776 9119.776 9129.776 9139.776 9149.776 9159.776 9166.280 9366.280 935

Accessories for Eppendorf Thermomixer ™Eppendorf ThermoTop® with condens.protect® technology avoids condensation and improvestemperature uniformity.

Lid for Eppendorf Thermomixer ™ F1.5 and FP, for Eppendorf Smart Blocks ™ 0.5-2.0 mL, plates, PCR 96 and PCR 384

2Eppendorf AG

Type PK Cat. No.

Eppendorf ThermoTop®

Lid11

9.776 9189.776 917

2www.wen

k-lab

tec.co

m

www.wenk-labtec.com

516

4. Stirring, Shaking, MixingShakers and mixers/Overhead shakers


E & OE.

Overhead mixer LLG-uniROTATOR 2Analogue overhead mixer with vertical rotary motion for gentle but effective mixing. Ideal for biological samples. Suitable for cutting and mixing processes of powdered and liquid samples in tubes up to 50 ml. With easily interchangeable clamps that allow a quick cleaning of the mixer.

- Compact design- Housing easy to clean- Non-slip, adjustable screw feet

Scope of delivery: Overhead mixer incl. 12 clamps each for 2 ml, 15 ml and 50 ml tubes

1

SpecificationsType of movement: overheadVariable speed: 0 - 80 rpmRotation angle: 360°Permissible shaking weight (incl. attachment): 2 kgMotor rating input: 20 WDimensions (W x D x H): 530 x 150 x 190 mmPower supply: 100-240 V, 50/60 HzProtection class: IP 21Warranty: 3 years

Type PK Cat. No.

LLG-uniROTATOR 2 with EU-plugLLG-uniROTATOR 2 with UK-plugClamp for 2 ml centrifuge tubeClamp for 15 ml centrifuge tubeClamp for 50 ml centrifuge tube

11

121212

6.263 6606.263 6616.263 6626.263 6636.263 664

1

Vertical mini rotator PTR-25Compact, economy solution with simple to use controls, providing thorough mixing ofsamples in tubes up to 50 ml. Suitable for preventing blood coagulation in tubes and forfulfilment of procedures of extraction of biological components. For use in cold rooms and incubators.

- 360° vertical rotation- Vertical rotation speed range: 5 rpm to 30 rpm- Timer: 1 min to 24 hours, with audible alarm and automatic switch-off- Simple to use controls- Platform accommodating 22 tubes (up to 15 mm diameter) is included as standard

2Grant


PK Cat. No.

kgPTR-25 for 22 microtubes 0.5 1 9.721 016

2

Vertical mini rotator RotoFlex™ PlusThis simple benchtop rotator is ideal for a number of laboratory applications includingDNA purification, hybridization or sample mixing. It is digitally controlled and can also beset in an oscillating mode to increase mixing efficiency. This tube rotator accepts tubes from 0.5 to 50 ml. The rotisseries to hold each of the tubes are included in the set.

Features:- 360° revolution, adjustable angle from 0 to 90°- Speed: 10 to 40 rpm, adjustable- For tubes of 0.5 to 50 ml, interchangeable tube racks- Can be used in a cold room or incubator (4 °C to 60 °C)

3Argos Technologies

Type PK Cat. No.

Vertical mini rotator RotoFlex™ Plus 1 6.281 561

3

www.wen

k-lab

tec.co

m

www.wenk-labtec.com

517



E & OE.

Multi-function rotator PTR-35/PTR-60Vertical multi-function rotator for thorough mixing in tubes, with multi-segment programme.- Multi-function: vertical rotation, reciprocation, vibration- Continuous or timed operation for each phase- Choice of two models with different microtube capacities- Speed: 1 rpm to 100 rpm- Reciprocal rotation: 1° to 90° turning angle- Vibration: programmable in a burst of 1 to 5 seconds- Fully programmable sequence of functions, including pause- Alternative platforms for larger tubes

1

Grant


PTR-35PTR-60

for 26 microtubes with 15 mm dia.for 48 microtubes with 15 mm dia.

11

9.721 0289.721 030

1

9.721 028

Overhead shaker Trayster basic/digitalOverhead shaker with vertical rotation for smooth but effective mixing with a fixed speed.Ideal for biological samples, particularly blood samples. Suitable for separating and mixingprocesses of powdered and liquid samples in Eppendorf tubes and Greiner tubes up to 50 ml. The easy removable attachments allow simple and quick cleaning of the unit of spilled samples.- Different attachments allow a variety of applications- Usable at 4 to 50 °C in incubators- Suitable for continuous operation- Easy operation by foil keypad- Suitable for continuous operationTrayster digital only:- Timer: Countdown, adjustable from 1s to 99h 59min- Counter: Display of shaking time- Error code display

Attachments are not included. Please order separately.

2

IKA

SpecificationsType of movement: overheadShaking diameter: vertical or horizontalPermissible shaking weight (incl. attachment): 2 kgMotor rating input/output: 16/9 WDimensions (W x D x H): 460 x 140 x 180 mmProtection class acc. to DIN EN 60529: IP 21Power supply: 100-240 V, 50/60 Hz

Type Rotationspeed

PK Cat. No.

rpmTrayster basicTrayster digital

205 - 80

11

9.837 8709.837 871

2

9.837 871

Rotating Shaker 3040The specialist shaker with uniform rotating motion. Various applications, e.g. for mixingand processing of soil samples. Compact, low-wear drive mechanism. External housing ismade of electrolytically galvanized, powder-coated sheet steel. Clearly laid out control panel for easy operation. With LED speed display. Holding device guarantees easy clamping of sample vessels on the shaking rack. Electronic,stepless speed control, constant speed during continuous operation. Rotating rack incorporates ball bearings on bothsides, accommodating a max. of 12 flasks/vessels, round or rectangular, up to 110 mm max. dia. and 270 mm max.height, stacked in 4 levels, each level with 3 holding frames. Drive motion is achieved by an overload protected DCmotor. With stainless steel clamping frame for safe securing of the sample vessels. For ambient temperatures from 10 to 40 °C. Maintenance-free, CE marked.

3GFL

SpecificationsMotion: orbital rotatingSpeed range: 1 to 20 rpm.Speed control: Electronic, steplessSpeed display: DigitalCapacity: 12 bottles/vesselsBottle height range: to max. 270 mm heightMax. bottle dims.: 110 mm, round or squareDrive: d.c. motor with overload protectionDimensions (W x D x H): 770 x 700 x 715 mmSupply requirements: 230 V 50/60 Hz, 100 WMax. load: 20 kgNet/gross weight: approx. 62/78 kg

Type PK Cat. No.

3040 1 9.837 931

3

www.wen

k-lab

tec.co

m

www.wenk-labtec.com

518



E & OE.

Overhead shakers STR4For use with the STR4/1 drum, STR4/2 flask/bottle rotator Drum, STR4/3 figure 8 drum,STR4/4 bottle holder or STR4/5 eppendorf-type tube rack holder. Fitted with illuminatedmains On/Off switch. Has variable speed with electronic speed control, range 6rpm to 60rpm, fitted with 10 to 60 minute timer with Off option and manual over-ride position. Fitted with panel mounted fuse. For use on 230 V, 50 Hzsingle phase supplies. Overall dimensions (W x D x H) 650 x 250 x 250 mm. Net weight 6.4 kg. Requires accessorydrums for operation.

With BioCote, silver-based, antimicrobial protection.Drum and accessories sold separately.

1Stuart

Type PK Cat. No.

STR4 1 9.950 375

1

Drum STR4/1 for overhead shakersSTR4Square drum which accepts one plate of clips on each side. The plates plug into the drumwhich is fitted with a push button release/lock mechanism. Without accessory plates.Drive cat. no. 9.950 375 separately.

2Stuart

Type PK Cat. No.

STR4/1 1 9.950 376* Tubes not included

2

Accessory plates for STR4/1To fit drum 9.950 376. Fitted with clips to accept tubes vertically. Supplied in pairs.Drive cat. no. 9.950 375 separately.

Stuart

Diam. No. of tubes

PK Cat. No.

mm12161924

121087

2222

9.950 3789.950 3799.950 3809.950 381

Drum, Flask, STR4/2 for overhead shakers STR4Drum with two platforms for STR4. Accepts two 500 ml conical flasks or reagent bottles.The support columns can be detached to give two platforms 10.5 cm x 17.5 cm each forseparating funnels, jars or test tube racks.

With BioCote, silver-based, antimicrobial protection.Drive cat. no. 9.950 375 separately.

3Stuart

Type PK Cat. No.

STR4/2 1 9.950 382

3

Drum figure-of-8 STR4/3 for overhead shakers STR4The drum has a platform which can be adjusted within the drum from horizontal to 45°.In this way the sample container can be rolled and turned end over end at the same time.Suitable for extractions, paint mixing, powders and granular samples. The sample container is held by an adjustablevelcro strap. With BioCote, silver-based, antimicrobial protection.Drive cat. no. 9.950 375 separately.

4Stuart

Type PK Cat. No.

STR4/3 1 9.950 384

4

Bottle holder STR4/4 for overhead shakers STR4Perspex four segment cradle with velcro straps for STR4. Holds 2 to 4 bottles each up to 1000 ml capacity.

With BioCote, silver-based, antimicrobial protection.Drive Art. no 9.950 375 separately.

5Stuart

Type PK Cat. No.

STR4/4 1 9.950 385

5

For our range of environmental analysis please see chapter 12.

www.wen

k-lab

tec.co

m

www.wenk-labtec.com

519



E & OE.

Disc rotator LLG-uniLOOPMIX 2Analogue Disc rotator for gentle and effective sample mixing. Suitable for all biological samples. With easilyinterchangeable clamps that allow a quick cleaning of the rotator. For a maximum of 48 x 1.5 ml, 16 x 5 or 15 ml, 8 x 50 ml tubes. Also for parallel use of different sizes, can beequipped individually.

- Variable speed 0 - 80 rpm- Compact design- Housing easy to clean- Non-slip, adjustable screw feet

Scope of delivery: Disc rotator incl. 12 clamps each for 2 ml, 15 ml and 50 ml tubes

1

SpecificationsType of movement: rotatingVariable speed: 0 - 80 rpmRotation angle of disc: 360°Permissible shaking weight (incl. attachment): 2 kgrel. Moisture: up to max 80 %Working temp.: +5 to +40 °CMotor rating input/output: 20 WDimensions (W x D x H): 220 x 300 x 310 mmPower supply: 100-240 V, 50/60 HzProtection class: IP 21Warranty: 3 years

Type PK Cat. No.

LLG-uniLOOPMIX 2 with EU-plugLLG-uniLOOPMIX 2 with UK-plugClamp for 2 ml centrifuge tubeClamp for 15 ml centrifuge tubeClamp for 50 ml centrifuge tube

11

121212

6.263 6656.263 6666.263 6626.263 6636.263 664

1

Rotators SB2/SB3The Stuart rotators give gentle but effective mixing, ideal for life sciences applications such askeeping blood samples in suspension. The angle of tilt is fully adjustable. The Rotators can beused in incubators up to 60 °C and in cold rooms down to 4 °C.

SB2: Fixed speed of 20 rpm.SB3: Variable speed of 2 rpm to 40 rpm. Additional digital timer of 1 to 999 minutes. Digital speed control.

There are six types of tube holder available. Please order separately.

2

Stuart

Specifications:Dimensions (W x D x H): 200 x 270 x 230 mmSupply: 230 V/50 Hz, 50 WWeight: 3.2 kg

Type PK Cat. No.

SB2SB3

11

9.645 3229.645 323

2

9.645 323

Tube holders for rotators SB2/SB33Stuart

Type For No. ofvessels

PK Cat. No.

SB3/1SB3/2SB3/3SB3/4SB3/5SB3/6

Micro tubes, 10 to 11.5 mm dia.Test/blood tubes, 9 to 20 mm dia.50 ml centrifuge tubes, 25 to 35 mm dia.Culture tubes, 12 mm dia.Culture tubes, 16 mm dia.Culture tubes, 26 mm dia.

462012636330

111111

9.645 3249.645 3259.645 3269.645 3279.645 3289.645 329

Additional accessories on request.

3www.wen

k-lab

tec.co

m

www.wenk-labtec.com

520

4. Stirring, Shaking, MixingShakers and mixers/Roller mixers


E & OE.

Roller Mixers LLG-uniROLLER 6 and 10, digitalDigital tube rollers with 6 or 10 rolls for the efficient mixing of biological samples, viscous substances and liquid-solid suspensions. The LLG-uniROLLER 6 and 10 are equipped with very easily detachable rollers enabling theuser to adjust the space to hold tubes and bottles of different diameter and to quickly clean and decontaminate the unitin case of sample spillage.

- Detachable rollers for very easy cleaning in case of sample spills- Speed ranging from 10 to 80 rpm- Timer from 1 min to 99 min and continuous mode- Pulse mode feature for increased mixing efficiency- Microprocessor controller for accurate speed under variable load- Brushless DC motor for quiet operation and maintenance free long life- Digital display- Save up to 9 user defined programs- Can be used in incubators up to 40 °C and humidity up to 80 %- Stackable design- Tilting and rolling movement for ideal mixing

1

SpecificationsType of movement: rocking and rollingAmplitude: 24 mmLoad max.: 2 kgAmbient temperature: up to + 40 °CMax. humidity: up to 80 %Roller size (l x Ø): 330 x 30 mmPower supply: 100-240 V, 50/60 HZProtection class: IP 21Warranty: 3 years


Rollers PK Cat. No.

mmLLG-uniROLLER 6, with EU plugLLG-uniROLLER 6, with UK plugLLG-uniROLLER 10, with EU plugLLG-uniROLLER 10, with UK plug

502 x 301 x 92.5502 x 301 x 92.5502 x 448 x 92.5502 x 448 x 92.5

66

1010

1111

6.263 6506.263 6516.263 6526.263 653

1

6.263 652

Tube Roller Mixer, SRT6, SRT6D, SRT9, SRT9DThese roller mixers provide a gentle, but highly efficient, rocking and rolling action. There are four models available, two analogue models with either 6 or 9 rollers, with a fixedspeed of 33 rpm. Or two more advanced digital models with either 6 or 9 rollers, with digitally controlled speed between5 and 60 rpm and programmable timer.

The roller mixers feature easy to remove side panels. The side panels provide the user with complete peace of mindthat samples will remain on the roller during continuous use. The rollers conveniently detach to accommodate largervessels and therefore allow the user to mix a wide variety of differently sized tubes and bottles. Recommended formixing blood samples, viscous substances and liquid-solid suspensions where minimum aeration is required. Units canbe used in incubators up to 60 °C and humidity up to 80 %, or in cold rooms down to 4 °C.

- Rocking and rolling action for complete mixing- Choice of analogue fixed speed or digital variable speed model- 6 or 9 roller design with footprint- Designed for continuous quiet operation- Removable side panels to keep tubes on the roller- With BioCote antimicrobial protection

2

Stuart


Rotationspeed

Rollers Loadmax.

PK Cat. No.

mm rpm kgSRT6SRT6DSRT9SRT9D

565 x 240 x 110565 x 240 x 110565 x 360 x 110565 x 360 x 110

33 (fixed)5 to 6033 (fixed)5 to 60

6699

5.05.05.05.0

1111

9.728 8109.728 8119.728 8129.728 813

2

9.728 811

Stacking system for roller mixers Stuart

Type PK Cat. No.

SRT/STACK 4 9.728 815

www.wen

k-lab

tec.co

m

www.wenk-labtec.com

521

4. Stirring, Shaking, MixingShakers and mixers/Roller mixers


E & OE.

Tube roller Roller 6 basic/6 digital/10 basic/10 digitalRoller shaker with 6 or 10 rolls, with smooth rocking and rolling action and a fixed speed.Particularly for mixing blood samples, solid and liquid suspensions and viscous samples. The unit can be used for all conventional tubes and cylindrical bottles. The easy removable rolls allow simple and quickcleaning of the unit from spilled samples.

- Usable from 4 to 50 °C in incubators- Suitable for continuous operation- Removable rolls make it suitable for larger tubes- Easy operation by foil keypad- Easy removable rolls

Roller 6 digital/10 digital only:- Timer: Countdown, adjustable from 1 s to 99 h 59 min- Counter: Display of shaking time- Error code display

1

2

IKA

SpecificationsType of movement: rocking and rollingShaking diameter 24.5 (height)Roller size (l x Ø): 310 x 32 mmAmbient temperature: +4 °C to +50 °CMax. humidity: 80 %Protection class: IP 21Power supply: 100-240 V, 50/60 Hz


Rotationspeed

Rollers Loadmax.

PK Cat. No.

mm rpm kgRoller 6 basicRoller 6 digitalRoller 10 basicRoller 10 digital

240 x 545 x 115240 x 545 x 115380 x 545 x 115380 x 545 x 115

30 (fixed)5 - 8030 (fixed)5 - 80

66

1010

2.02.02.02.0

1111

9.729 9709.729 9719.729 9729.729 973

1

9.729 970

2

9.729 973

www.wen

k-lab

tec.co

m

www.wenk-labtec.com

522

4. Stirring, Shaking, MixingShakers and mixers/Microtitre plate shakers


E & OE.

Microtitre shaker LLG-uniPLATESHAKER 1The LLG-uniPLATESHAKER 1 has been designed for accommodating and mixing a single micro plate. Due to its small footprint it can be used in working areas with limited space such as fume hoods and bio safetycabinets. It can also be used inside a cold-room.

- Digital Display with Speed and Time settings- Variable speed from 300 to 1800 rpm- Maintenance free brushless DC motor- Orbital Diameter of 2 mm for thorough mixing- Timer setting from 1 to 99 min and continuous mode- Universal fit; comes with interchangeable clamps for different micro plate sizes- Comes with foam attachment for 20 x 1.5/2 ml microtubes

1 2

SpecificationsType of movement: orbitalOrbital diameter: 2 mmSpeed range: 300 to 1800 rpmMotor: brushless DC motorTimer: 1 to 99 min, continuousPower consumption: 15 WPermissible ambient temperature: 4 to 40 °CDimensions (W x D x H): 127 x 85 x 86 mmWeight: 1.4 kgPower supply: 100-230 V, 50/60 HzWarranty: 3 years

Type PK Cat. No.

LLG-uniPLATESHAKER 1 with EU-plugLLG-uniPLATESHAKER 1 with UK-plug

11

6.263 4886.263 489

1

2

Microtitre shaker PMS-1000iReliable, regulated shaking for two or four microplates. Simple screw attachments allow quickand easy fitting of any standard depth 96 or 384 well plates, holding the plate securely in place.- direct drive- brushless motor- RPM set and display- variable speed: 150 rpm to 1200 rpmorbit: 2 mm- continuous or timed operation- integral timer: 1 min to 24 hours- standard option for two microplates- optional platform MPP-4 for four microplates- ambient 4 °C to 40 °C

3Grant


PMS-1000iMPP-4

Microplate shakerPlatform for 4 micro plates

11

9.721 0749.721 026

3

Digital Shakers Orbit™ P2/P4 for 2 or 4 microplatesThese vortexers accept all standard microplates. Retaining springs on the contoured steelplatform hold samples in place. Shaker P2 holds two microplates, P4 four microplates- large digital display with single knob control- suitable for cold room or incubator use- electrical: 230V, 50Hz

Scope of supply: Shaker with platform for 2 or 4 microplates.

4Labnet

SpecificationsSpeed range 100 to 1200 rpmTimer 0 to 99 minutes or continuousMotion CircularOrbit size 3 mmMaximum load: 0.3 kgAmbient operating range +4 to 65 °CBase dimensions (W x D x H) 168 x 279 x 153 mmWeight 4.3 kgPower supply: 230 V, 50 Hz


Orbit™ P2Orbit™ P4

2 microplates4 microplates

11

9.595 3286.285 556

4

www.wen

k-lab

tec.co

m

www.wenk-labtec.com

523



E & OE.

Microtitre shaker MTS 2/4 digitalDedicated shaker for two or four microtitre plates. Orbital movement.- Electronic speed regulation- Digital timer- Acoustic signal at end of timed period- With attachment but without plates

1IKA

SpecificationsMotor rating input/output: 35/13.2 WOrbit: 3 mmCapacity: 2 or 4 microtitre platesSpeed range: 0 to 1100 rpmSpeed range: Analogue scaleTimer: 1 to 99 min/continuousDimensions (W x D x H): 185 x 320 x 105mmWeight: 2.7 kgHousing IP rating to DIN EN 60529: IP 21Supply requirements: 230 V, 50/60 HzTested to DIN EN IEC 61010-1.

Type PK Cat. No.

MTS 2/4 digital with EU-plug 1 9.838 195

1

Incubator- and Thermo shaker please see page 512.

Shaker, microtitre plate, SSM5/SSL5- Vibrational mixing action - ideal for microtitre plates- Digital selection of mixing speed- Built-in digital timer or continuous operation- Optional tube holders available for mixing microcentrifuge tubes

Designed for use with microtitre plates and microcentrifuge tubes. The aluminium tray is fitted with a specially designedmat that securely holds in place up to four wellplates. High speed combined with a tiny orbit creates the vibrationalshaking action required for mixing the very small volumes contained in the wells or in microcentrifuge tubes. Speed isvariable from 250 to 1250 rpm and is easily set via the digital display. Shaking times can be set from 1second to 9999minutes on the built in digital timer. The unit can also be set for continuous operation. Tube holders are available asoptional accessories. They fit securely onto the platform turning the unit into an effective tube mixer.With BioCote, silver-based, antimicrobial protection.

2Stuart

Specifications SSM5 | SSL5Platform dimensions (W x D): 220 x 220 mm | 306 x 306 mmNumber of plate positions: 4 | 8Speed range: 250 to 1250 rpmOrbit diameter: 1.5 mm | 1.5 mmMaximum load: 1 kg | 2 kgOverall dimensions (W x D x H): 240 x 300 x 160 mm | 360 x 420 x 160 mmSupply requirements: 230 V, 50 Hz (50 W)


SSM5, shaker, microtitreSSL5, shaker, microtitreSSM5/1, tube holder for 1.5 ml tubesSSM5/2, tube holder for 0.5 ml tubesSSM5/3, tube holder for 0.2 ml tubes

11111

9.728 8509.728 8539.728 8519.728 8529.728 854

2

www.wen

k-lab

tec.co

m

www.wenk-labtec.com

524



E & OE.

Mixer MixMate®

The MixMate is a compact and versatile mixer, specially designed for mixing smallvolumes (5 μl to 2 ml) in numerous plate and tube formats. The fast and preciselycontrolled mixing movements (2DMix-Control) enable efficient and homogeneous mixing of samples in all vesselformats, allowing MixMate to be used for virtually any application. It accommodates micro test tubes, PCR plates, PCRstrips, deepwell plates and MTPs. The integrated touch vortex function, with minimal hand/arm vibration transfer(Eppendorf PhysioCare Concept), completes this unique product profile. The innovative additional 2 second run timerallows vortexing of your next sample without restarting. Incl. 3 tube holders: PCR 96; 0.5 ml; 1.5/2.0 ml

1Eppendorf AG

SpecificationsMixing frequency: 300 to 3000 rpmTouch vortexing frequency: 3500 rpmAdjustable mixing time: 15 s to 99.5 h; continuousMixing and vortexing radius: 1.5 mm (3 mm mixing stroke)Noise level: < 50 dB(A)Power supply: 230 V, 50/60 Hz


Weight Power PK Cat. No.

mm kg WMixMate® 170 x 230 x 130 4.2 40 1 9.776 660

1

Microplate thermoshaker PHMP/PHMP-100/PHMP-4

For 96- and 384-well plates. The PHMP is a variable speed, variable temperature microplateshaker incubator with excellent temperature uniformity across the microplate. The patented heated lid and base which completely cover the plate produce a controlled micro-environment. This is combined with powerful orbital shaking to produce the maximum yield from your incubations.- Stability ±0.1 ºC, uniformity ±0.25 ºC, rapid heat-up- For standard 96 or 384-well plates (max. 14 mm height)- Choice of models with a capacity of 2 microplates (PHMP/PHMP-100) or 4 microplates (PHMP-4)- Variable speed: 250 rpm to 1200 rpm- 2mm shaking orbit for effective mixing- Temperature setting range: +25 to 60 °C, PHMP-100: +25 to 100 °C- Temperature control range: RT +5 to 60 °C, PHMP-100: RT +5 to 100 °C- Timed operation: 1 min to 96 hours

2

3

Grant

Type Temp.range

PK Cat. No.

max. °CPHMPPHMP-100PHMP-4

RT +5 to 60RT +5 to 100RT +5 to 60

111

9.721 0336.280 0736.227 761

2

9.721 033

3

6.227 761

Deep well plate thermoshaker TS-DWA thermoshaker designed for shaking and heating of deep well plates. A multisystemprinciple, used in the design of the thermoshaker allows it to operate as 3 independentdevices: Incubator, Plate shaker and Thermoshaker- Profiled platform for perfect plate fit and maximum heat transfer- Temperature setting range: +25 to 100 °C- Temperature control range: +5 °C above ambient to 100 °C- Shaking speed: 250 to 1400 rpm- Rapid heat-up speed- Very small footprint

Applications: Life science applications, molecular biology, cell biology lab, cell lysis, DNA isolation and purification,sample preparation for PCR, pellet re-suspension, or any other method where you have many samples that need mixingin deep well plates.

4Grant

Type PK Cat. No.

TS-DW 1 6.280 074

4

Heating Blocks for Deep well plate thermoshaker TS-DW

5

Grant


B-2AB-2EB-25B-2SL

1 Axygen® deep well plate 96/2000 µl1 Eppendorf® deep well plate 96/1000 µl1 Sarstedt® deep well plate 96/2200 µl1 Starlab® deep well platte 96/1200 µl

1111

6.280 0686.280 0706.280 0716.280 072

5

6.280 070

www.wen

k-lab

tec.co

m

www.wenk-labtec.com

wenk labtec - laboratory equipment, consumables …...429 4. stirring, shaking, mixing contents...

Documents