weber silas hrc fuse-switch- disconnectors

E3.2

WEBERSILAS HRC fuse-switch-disconnectors

Contents

2

WEBERS ILAS

E3.2

Page

The new generation SILAS 3

Unique advantages of SILAS for mounting on busbars and on base plates 4 – 7

New connection technique 8

SILAS bus-mounting model for system with 40 mm busbar spacing 8

Accessories – Easy solutions to practical problems 9

Order details for SILAS models for mounting on base plates 10 – 11

Order details for SILAS models for bus mounting 12 – 13

Order details for accessories for SILAS size 00 14 – 15

Order details for accessories for SILAS sizes 1–3 16 – 17

Order details for current transformer installation for SILAS sizes 00–3 18 – 19

Overview of accessories 20

Type designation for base-plate mounting 20

Technical details 21

Dimensions 22 – 23

Edition 2002 Rights of technical changes reserved

The new generation SILAS

3

WEBERS ILAS

The new SILAS series sizes 00, 1, 2 and 3 was develop-ed on the basis of extensive market studies and with aholistic view of customer needs. The resulting advan-tages for users are readily apparent.

With this new SILAS generation, planners and switch-gear manufacturers are provided with a range of devic-es that will help them remain competitive in the face ofever tougher market requirements. After all, modern approaches to power distribution demand modularswitchgear that is simple to install and safe and reliablein operation. A cost-benefit ratio in line with the marketand ease of service are absolute musts.

SILAS for mounting on base plates

The disconnectors for mounting on base plates, sizes00, 1, 2 and 3, come with a number of predrilled fastening holes that allow these models to be used onbase plates or on profiles. With the appropriate acces-sories, the sizes 00 and 1 can be mounted on two top-hat rails.

SILAS offers innovative solutions

On the new SILAS models for mounting on base platesand for bus mounting, the entire covers can be easilyremoved while the switching cover is closed, thus eliminating the need for elaborate trim frames and extensions.

Integrated hand protection and a sliding viewing win-dow enable voltage tests to be conducted on contactblades or strap handles.

Types in the sizes 1, 2 and 3 can be retrofitted with anarc sheet to increase the switching capacity.

Besides reliable connection techniques such as cablelug, clamp connector for copper and aluminum, a newbox terminal was developed for SILAS size 00. It has thedual advantage of reducing the connection installationtime and eliminating the need for cable lugs.

All SILAS disconnectors can be sealed and fitted with alocking mechanism.

SILAS for bus mounting

What makes the bus-mounting disconnectors sizes 00,1, 2 and 3 unique is that they all have the same installa-tion height (32 or 70 mm). This eliminates the need forelaborate compensating parts and makes the coversvery easy to manufacture.

A new SILAS 00 with lower outgoing terminals was developed for installation next to D-bus-mounting fuseelements. This eliminates the fuss of having to bend thecables.

Another unique feature is the patented system for con-verting the outgoing arrangement from top to bottomand vice versa. A few simple adjustments are all that isneeded.

The fuse-switch-disconnectors can be attached, posi-tioned and tightened effortlessly.

Practical accessories

Laterally attachable support profiles for all disconnectorsizes enlarge the cut-out tolerances of the cover plateswhile also supporting these plates.

The electronic fuse monitor is directly attached to theswitching cover. The installation depth is 28 mm. Alight-emitting diode starts blinking red the moment thefuses fail. A test button and a 4-pole connector for re-mote indication are attached to the housing.

The user can install class 0.5s or 1 current transformersfor SILAS sizes 00, 1, 2 and 3 himself with the appro-priate assembly kits.

Further accessories like terminal housing cover, ter-minal extension, position indication for switching cover,etc., assist the user in finding the optimum approach.

Unique advantages for SILAS bus-mounting models

4

WEBERS ILAS

Mounting depth of 32 mm

Suitable for D-bus mounting fuseelements

Same level as SILAS sizes 00–3

No additional parts

Mounting depth 70 mm

Mounting depth without D-bus mounting fuse elements

Same level as SILAS sizes 00–3

No additional parts

Very easy cut-outs for covers SILAS sizes 00, 1, 2 and 3

Low mounting depth

No adapter required

Direct contacting

Short current paths

Unique advantages for SILAS bus-mounting models

5

WEBERS ILAS

Sensational conversion

Conversion of outgoing top/bottomin no time at all

Reduced stocking costs

For all sizes 00–3

Patented solution

Mounting advantage

Attach effortlessly to the busbar

Position with ease

Tighten the screw

Busbar carrier can be covered over

Less space is lost

for SILAS sizes 00, 2 and 3

SILAS 00 with new connectiontechnique

Besides D-bus mounting fuse ele-ments, mounting depth of 32 mm

Box terminals up to 70 mm2 Cu

Separate model

Unique advantages of SILAS for mounting on busbars and on base plates

6

WEBERS ILAS

Covers removable without opening switch

Easy to detach cover

even without opening switch

Current is not interrupted

No need for expensive trim frames or extensions

Cost savings

No additional parts required

Ideal voltage test

Long test probe on contact blade

Short test probe on strap handle

Optimum labeling

Interchangeable

Protected label

Max. of A … can be entered

Technical data always visible

Unique advantages of SILAS for mounting on busbars and on base plates

7

WEBERS ILAS

Reliable switching with integrat-ed hand protection feature

Prevents fuse-unit contact

Protection against electric arc

Locking cover with sealing facility

Locking mechanism for switching cover for non-instructed individuals

Switching cover is sealable

Protection against accidentalcontact in the standard model

Terminal housing closed

Optimum knock-out features

Terminal housing cover usually not needed

Knock-out versions for connections

Standard model closed

Very simple break-out

for all versions

also those with terminal housing covers

New connection technique

8

WEBERS ILAS

for SILAS 00

Advantageous box terminalsSave timeCu conductor up to 70 mm2

No cable lug needed

or universal screw terminalfor M8 cable lugThis can be retrofitted…

for SILAS sizes 1–3

The standard versionSize 1 for M10 cable lugSize 2 for M10 cable lugSize 3 for M12 cable lug

Easy to change the various types of connection

Clamp connection for Cu conductorsPrism terminal for Al or Cu conductorsPrism terminal for two conductors

SILAS bus-mounting model for system with 40 mm busbar spacing

SILAS sizes 00 and 1

Mounting depth 70 mm

Outgoing connection as with bus-mounted disconnector 60 mm

Size 00 can be attached to busbar

Size 1 contacting as with bus-mounteddisconnector 60 mm

Accessories – Easy solutions to practical problems

9

WEBERS ILAS

Support surface for coverplates

Latchable bracket on the side Allows greater cutting tolerances

Attachment on top-hat rail

for sizes 00 and 1 with spacing of 125 or 150 mm

Terminal extensionsizes 1, 2 and 3, at mountingdepth of 32 mm for cable lugconnection

Switching cover positionindicator

Same micro switch as SILAS00–31 close contact and 1 opencontact

High switching capacityEasy to retrofit for higherswitching capacity withblow-out plates SILAS 1–3for AC – 23 B at 690 Vor to order as such ex works

Terminal housing covers

As compensation with SILAS 00 to SILAS 1–3As terminal housing coverfor SILAS 00–3 (pursuant to UVV-BGV A2)optional expanable

Current transformer designSILAS sizes 00–3Installation kit for mountingcurrent transformerCurrent transformer, class 0.5s or 1

Fuse monitoringDirectly mountedMinimum depth of 28 mmLED blinks if one, two, or threefuses failBuilt-in test key4-pole plug on housing forremote alarm

HRC fuse-switch-disconnectors

10

WEBERS ILAS

Technical details 21 Dimensions 22 Accessories 14 – 19

SILAS for mounting on base plates or profiles

ll5

ll4

ll3

ll1 ll2

ll10

ll6 ll7

ll9 ll8ll12

ll11

Order details

11

WEBERS ILAS


Description Size Item No Pack

screw connection M8box terminal for Cu up to 70 mm2

screw connection M10screw connection M10screw connection M12

screw connection M8box terminal for Cu up to 70 mm2



dimensions of cover 266 x 192 mmwith neutral disconnector N160with neutral disconnector NTK160

0000

123

0000

123

123

0000

Ie A

160160

250400630

160160

250400630

250400630

160160

S00S00R

S1S2S3

S00SUS00RSU

S1SUS2SUS3SU

SH1SH2SH3

S00NS00NTK

707.036.001707.036.002

707.037.001707.038.001707.039.001

707.036.007707.036.008

707.037.011707.038.011707.039.011

707.037.021707.038.021707.039.021

707.042.010707.042.020

11

111

11

111

111

11

Type Weight

0.6450.605

2.0303.0103.545

0.7300.690

2.1153.0953.630

2.1803.1793.733

1.3901.580

SILAS for mounting on base plates or profiles


Remarks:– SILAS with mounted clamp connection or prism terminal or other combinations on request

HRC fuse-switch-disconnectors with shroudingcover and neutral conductor disconnector

HRC fuse-switch-disconnectors with high switching capacity AC-23B

HRC fuse-switch-disconnectors with electronic fuse monitoring

ll1ll2

ll3ll4ll5

ll6ll7

ll8ll9ll10

ll11

ll12

40

40

60

60

60

60


12

WEBERS ILAS


SILAS for bus mounting on system with 40 mm busbar spacing

Bar width 12 mmBar thickness 5 and 10 mm

on system with 60 mm busbar spacing

Bar width 12–30 mmBar thickness 5–10 mm

on system with 60 mm busbar spacing

with fuse monitoring

ll9

ll8

ll7ll6 ll5

ll4

ll3ll1 ll2

ll15

ll14

ll13

ll11 ll12

ll10

Order details

13

WEBERS ILAS


HRC fuse-switch-disconnectors for bus mounting

Description Item NoSizeIe A Pack

HRC fuse-switch-disconnectors for bus mountingscrew connection M8box terminal for Cu up to 70 mm2

screw connection M10

HRC fuse-switch-disconnectors for bus mountingbox terminal for Cu up to 70 mm2



HRC fuse-switch-disconnectors for bus mountingbox terminal for Cu up to 70 mm2



HRC fuse-switch-disconnectors for bus mountingscrew connection M10screw connection M10screw connection M12

0000

1

00

0000

123

00

0000

123

123

160160

250

160

160160

250400630

160

160160

250400630

250400630

SR00TVSR00RTV

SR1V

SR00R

SR00TSR00RT

SR1SR2SR3

SR00RSU

SR00TSUSR00RTSU

SR1SUSR2SUSR3SU

SRH1SRH2SRH3

707.036.012707.036.013

707.037.031

707.036.016

707.036.017707.036.018

707.037.041707.038.041707.039.041

707.036.031

707.036.032707.036.033

707.037.051707.038.051707.039.051

707.037.061707.038.061707.039.061

11

1

1

11

111

1

11

111

111

Type Weight

0.7150.685

2.120

0.801

0.7800.750

2.1203.1803.820

0.886

0.8650.835

2.2053.2653.905

2.2703.3494.008

Remarks:– Installation depth = dimension of busbar up to cover plate – SILAS with mounted clamp connection or prism terminal or other combinations on request

On system with 40 mm busbar spacing, installation depth 70 mm

SILAS with fuse monitoring, on system with 60 mm busbar spacing, installation depth 32 mm

SILAS with fuse monitoring, on system with 60 mm busbar spacing, installation depth 70 mm

SILAS with high switching capacity AC-23B, on systemwith 60 mm busbar spacing, installation depth 70 mm



ll1ll2

ll3

ll4

ll5ll6

ll7ll8ll9

ll10

ll11

ll12

ll13

ll14

ll15

Accessories for SILAS size 00

14

WEBERS ILAS

Technical details 21 Dimensions 22 – 23

ll7

ll1 Standard version M8 screw-type terminal

ll2 ll3 ll4 Only possible on M8 screw-type terminal

ll10

ll6 ll1ll4

ll3ll2

ll8

ll7

ll5

ll6

ll9

Order details

15

WEBERS ILAS


Accessories for SILAS size 00


Screw connection M8 x 14with spring element for cable lug max. 95 mm2

set = 3 pieces

Clamp connectionfor copper, set = 3 pieces 6 – 50 mm2

Prism terminalfor copper and aluminium*, set = 3 pieces 6 – 70 mm2

Triple terminalfor 3 conductors, set = 3 pieces 3 x 1,5 – 16 mm2

PE/N terminationto be mounted left or rightfor M8 screws

Terminal coverprevents accidental contact (pursuant to UVV-BGV A2) or to compensate

Support profilelaterally attachable, set = 2 pieces

Attachment to top-hat railsfor use on two top-hat rails withspacing of 125 or 150 mm, set = 1 piece

Indication switch for covermicro switch with opener and closer2 A 250 V tab 2.8 x 0.5

Locking windowmountable from the inside, set = 3 pieces

00

00

00

00

00

00

00

00

00

00

V00-S

S-00C

S-00A

S-00DK

S-00PEN

S-00ARA

S-00AP

S-UD

S-US

S-UV

708.121.010

707.001.010

707.007.010

707.057.010

707.050.010

707.041.010

707.056.010

707.049.010

707.055.010

707.062.010

Set

Set

Set

Set

1

1

Set

Set

1

Set

Type Weight

0.042

0.033

0.075

0.147

0.034

0.031

0.022

0.053

0.006

0.005

ll1

ll2

ll3

ll4

ll5

ll6

ll7

ll8

ll9

ll10

* = Aluminum conductor connections should be checked at regular intervals

Accessories for SILAS sizes 1–3

16

WEBERS ILAS


ll4

ll1ll2

ll3

ll5

ll5

ll4

ll6

ll10

ll7

ll9

ll6

ll8

Order details

17

WEBERS ILAS


Accessories for SILAS sizes 1–3


Clamp connectionfor solid rm, sm and laminated copper, set = 3 piecesconnection 70–150 mm2 / 18 x 7–18 mm

120–240 mm2 / 21 x 5–19 mm150–300 mm2 / 25 x 7–20 mm

Prism terminalfor copper and aluminium*, set = 3 piecesconnection 70–150 mm2 / 18 x 10 mm

120–240 mm2 / 21 x 15 mm150–300 mm2 / 25 x 20 mm

Prism terminal for 2 conductorsfor copper and aluminium*, set = 3 piecesconnection 2 x 35– 70 mm2

2 x 70–120 mm2

2 x 150–185 mm2

Terminal housing coverprevents accidental contact (pursuant to UVV-BGV A2) or to compensate

Support profilelaterally attachable, set = 2 pieces

Attachment to top-hat rails, set = 1 piecefor use on two top-hat rails with spacing of 125 or 150 mm

Indication switch for covermicro switch with opener and closer2 A 250 V tab 2.8 x 0.5

Locking windowmountable from the inside, set = 3 pieces

Terminal extensionfor installation depth of 32 mm, set = 3 pieces

Retrofit kit for increased switching capacity, set = 3 pieces

Busbar adaptersfor mounting SILAS on 100 mm busbar systemsBusbar adaptersBusbar adaptersBusbar adapters

123

123

123

123

1–3

1

1–3

123

123

123

250400630

S-1CS-2CS-3C

S-1AS-2AS-3A

S-1ADS-2ADS-3AD

S-1ARAS-2ARAS-3ARA

S-UAP

S-UD

S-US

S-UV

S-1AVS-2AVS-3AV

S-1HS-2HS-3H

S-1SAS-2SAS-3SA

907.910.063907.910.064907.910.065

907.910.049907.910.050907.910.051

907.910.070907.910.071907.910.072

707.041.020707.041.030707.041.040

707.056.020

707.049.010

707.055.010

707.062.010

707.059.010707.059.020707.059.030

707.058.010707.058.020707.058.030

707.063.010707.063.020707.063.030

Set Set Set

Set Set Set

Set Set Set

111

Set

Set

1

Set

Set Set Set

SetSetSet

111

Type Weight

0.1800.3060.378

0.3330.5850.735

0.6571.1641.461

0.0630.0920.108

0.042

0.053

0.006

0.005

0.1980.3390.462

0.1540.1730.192

ll1

ll2

ll3

ll4

ll5

ll6

ll7

ll8

ll9

ll10

* = Aluminum conductor connections should be checked at regular intervals

Current transformer installation for SILAS sizes 00–3

18

WEBERS ILAS

Technical details 21 Dimensions 23

ll5

ll6

ll7

ll8

ll9

ll1

ll3ll2

ll4

For SILAS sizes 1–3 base-plate or bus-moun-ting disconnector with screw-type terminal

For SILAS size 00 base-plate or bus-mountingdisconnector with screw-type terminal

ll12

ll13

ll11

ll10

Order details

19

WEBERS ILAS

Technical details 21 Dimensions 23

Current transformer installation for SILAS sizes 00–3


Assembly kit complete, without current transformersassembly kit for installation of current transformersassembly kit for installation of current transformersassembly kit for installation of current transformersassembly kit for installation of current transformersset = 3 pieces

Terminalfor voltage overcurrent interrupter, set = 3 piecessize 00 for M8, tab 6,3 x 0,8sizes 1–3 for M10/M12, tab 6,3 x 0,8

Sep. current transformers class 1incl. designation materialRange Output 100/5 class 1 2 VA150/5 class 1 2,5 VA250/5 class 1 3,75 VA400/5 class 1 3,75 VA600/5 class 1 5 VA

Sep. current transformers class 0,5s non-calibratedincl. designation materialRange Output 300/5 class 0,5s 2,5 VA600/5 class 0,5s 2,5 VA

Sep. current transformers class 0,5s calibratedincl. designation materialRange Output 300/5 class 0,5s 2,5 VA600/5 class 0,5s 2,5 VA

Terminal housing coverto cover cable lugfor SILAS size 00 2 are requiredfor SILAS size 1 2 are requiredfor SILAS size 2 3 are requiredfor SILAS size 3 3 are required

00123

001–3

00123

150250400600

100150250400600

300600

300600

S-00SWBS-1SWBS-2SWBS-3SWB

AST125V-AT12

100K1150K1250K1400K1600K1

300K05600K05

300K05G600K05G

S-00ARAS-1ARAS-2ARAS-3ARA

707.043.010707.044.010707.045.010707.045.020

745.015.010706.070.010

706.992.010706.992.020706.992.030706.992.040706.992.050

706.992.100706.992.110

706.992.120706.992.130

707.041.010707.041.020707.041.030707.041.040

SetSetSetSet

SetSet

11111

33

33

1111

Type Weight

0.4530.6850.8770.960

0.0090.015

0.2400.2400.2400.2400.240

0.3800.380

0.3850.385

0.0310.0630.0920.108

ll1ll2ll3ll4

ll5ll6

ll7

ll8

ll9

ll10

ll11

ll12

ll13

Overview of accessories

20

WEBERS ILAS

Size 00 Size 1 Size 2 Size 3

Attachment on top-hat rail • •Bracing profile, lateral • • • •Terminal housing cover • • • •Clamp connector for Cu conductors • • • •Prism terminal for Cu/Al conductors • • • •Prism terminal for 2 conductors • • •Installation kit for current transformer • • • •Installation kit for AC 23 • • •Positional indicator for switching cover • • • •Electronic fuse monitoring • • • •Terminal extension • • •

00–3 SILAS S

00–3 Device sizes 00, 1, 2, 3

00–3 NH 00–3 mounted on base plates empty00–3 Bus-mounting disconnectors R

00–3 Standard with blow-out plate empty1–3 High switching capacity H

00–3 Screw-type terminal empty00 Box terminal R

00 Installation depth 32 mm* empty00 Installation depth 70 mm* T

00–3 60 mm busbar spacing empty00–1 40 mm busbar spacing V

00–3 Without fuse monitoring empty00–3 With fuse monitoring SU

The materials used in SILAS are free of asbestos and of ceramic fibers. They contain neither chlorofluorocarbons (CFC),polychlorobiphenyl (PCB) and their isomers nor radioactive materials or mercury. All plastic parts are halogen free, flame retardant and release no hydrochloric acid when exposed to external sources of fire.

S RSize H R T V SU

Type designation for base-plate mounting

* = Sizes 1–3 same model for 32 and 70 mm

Technical details

21

WEBERS ILAS

SILAS HRC fuse-switch-disconnectors sizes 00–3 for mounting on base plates and for bus-mounting

Size Unit

Rated operational currents Ie A

Rated operational voltage Ue Vac

Rated insulation voltage Ui Vac

Rated surge withstand capacity Uimp kV

Ratedfrequence Hz

Categorie of useaccording to EN 60947-3at 500 Vacat 690 Vac

Rated conditional short-circuit currentwith fuse protection kA

Rated short-circuit making capacity Icm

with fuse kA

Mechanical lifenumber of switching cycles n

Electrical lifenumber of switching cycles n

Fuse linkmax. permissible powerloss W

Ambient temperature Tv °C

Degree of protection according to IEC 529On front side Operating state ET 32 mmOn front side Operating state ET 70 mmOn front side Switching cover open

Terminals:

Screw-type terminal

Clamp connector Cu mm2

Prism terminal Al/Cu mm2

Box terminal mm2

Tightening torque levels:

Screw-type terminal Nm

Clamp connector/Prism terminal Nm

Input terminal busbar Nm

Box terminal Nm

DIN00

160

690

1000

8

50…60

S

AC-23BAC-21B

50

50

1400

200

12

–20 bis 60

IP20IP30IP10

M8

6 – 70

6 – 70

4 – 70

12

3

6

4.5

DIN1

250

690

1000

8

50…60

S SH

AC-22B AC-23BAC-22B AC-23B

50

50

1400

200

23

–20 bis 60

IP20IP30IP10

M10

70 – 150

70 – 150

–

20

6

6

–

DIN2

400

690

1000

8

50…60

S SH


50

50

800

200

34

–20 bis 60

IP20IP30IP10

M10

120 – 240

120 – 240

–

20

8

8

–

DIN3

630

690

1000

8

50…60

S SH


50

50

800

200

48

–20 bis 60

IP20IP30IP10

M12

150 – 300

150 – 300

–

30

8

8

–

S = Standard SH = high switching capacity ET = Installation depth

Dimensions

22

WEBERS ILAS

SILAS for mounting on base plates, sizes 1–3

* = Fuse monitoring = in sizes 00–3

Fastening massType A

S1S2S3

184210250

474742

576580

150166195

B C D S1 S2/S3

33 33

37

106

194

37

67

6146

106

194

27

16

7.5ø8

46 3

80

194

28*

8

130

326

6

16 M8

184

6640

25

ø7

9712.5

7513

C C

B

A

B

32

70

110

298

4

M10

185

72

423

90

70

130

298

30

4

32

209

59

4

288

Gr. 2 = M10Gr. 3 = M12 D

25

164

25

ø11

57 33

184 106

40

57 33

40

104

70

40

194

M8

6

6

3

32

97

65

40

40

6

110

70

M10

298

23

4

4

32

21

158

97

40

40

SILAS for bus mounting with 40 mm busbar spacing

SR00TVSR00RTV

SR1V

S00/S00R S00-PEN, …SU …SU Fastening mass

SILAS for mounting on base plates, size 00

Dimensions

23

WEBERS ILAS

SILAS 00 for bus mounting with 60 mm busbar spacing

Current transformer installation, sizes 1–3

SR… SR1 SR2/SR3

33 33

194

37

37

60

60

21 104

40

194

M8

70 3

60

6071

91

6

6

184

21 104

6

6

32

194

91

60

60

21 110

23

298

M10

70

32

158

60

6098

4

4

21 130

30

298

Gr. 3 = M12

4

4

90

7032

60

60288

110

158

Gr. 2 = M10

10

116

68

30

44

70

37A

12 33

Type A

SR1SR2SR3

184210250

424747

576580

B C

Type A

SR1SR2SR3

456060

SR00… Installation depth 70 mm Installation depth 32 mm

C C

A

B

60

60

B

Current transformer installation, size 00

SILAS 1–3 for bus mounting with 60 mm busbar spacing

WEBER

WEBER AGElektrotechnikSedelstrasse 2CH-6021 EmmenbrückeSchweiz/SwitzerlandTel. +41 41 269 90 00Fax +41 41 269 92 97Internet: www.weber.chEmail: [email protected]

Office

WEBER SAElectrotechniqueVerdeaux 4CH-1020 RenensSchweiz/SwitzerlandTel. +41 21 671 16 16Fax +41 21 671 16 17Internet: www.weber.chEmail: [email protected]

Other companies

WEBER Nederland B.V.Postbus 30NL-7740 AA CoevordenNiederlande/NetherlandsTel. +31 524 59 58 00Fax +31 524 51 22 49

WEBER DeutschlandWemat GmbHBahnhofstrasse 30DE-49824 LaarDeutschland/GermanyTel. +49 594 79 20 22Fax +49 594 79 20 21

KAWETRA Kft.HU-7400 Kaposvár, Guba S. u. 38.HU-7401 Kaposvár, Pf.: 28Ungarn/HungaryTel. +36 82 416 020Fax +36 82 410 419

WEBER Myslakowice Sp.z o.o.ul. Jeleniogórska 4PL-58-533 MyslakowicePolen/PolandTel. +48 75 713 1024Fax +48 75 713 1018

Traders:

weber silas hrc fuse-switch- disconnectors

Documents