we like the tough jobs! separator.pdftrap rock, sand, and gravel ap- ... louvers fan assembly top...
TRANSCRIPT
We like the tough jobs!
And we’re good at them. As a leader in air separation technol-ogy, we’ll work with you to clean up your aggregates and meet tough Super-pave specifications. In many cases, the Fisher Air Separator eliminates the need for wash plants and has proven itself effective in granite, limestone, trap rock, sand, and gravel ap-plications.
Where water is in limited supply, the Fisher Air Separator is an ef-fective and economical tool.
Whether you’re producing manufactured sand for asphalt or concrete, the Fisher Air Sep-arator helps you meet the tough specification jobs. Its ability to “dry” process materials and remove excess fines promotes a clean and efficient operation.
Triple Axles
18” x 24’ DischargeConveyor
18” x 24’ DischargeConveyor
18” x 34’ Feed Conveyor
Electrical Panel with Hood
Grease SystemThree on-plant conveyors for material feed and discharge
On-plant, automatic grease-lubrication system
On-plant hydraulic system for ease and safety of setup/tear down
75 HP electric motor with Cutler Hammer AC Inverter
US Patent Number: 6,290,071
Available as portable or stationary units, the Fisher Air Separator is a field-proven machine that effectively removes unwanted fines from abrasive and non-abrasive aggregate appli-cations. The Fisher Air Separator helps you tackle the tough jobs efficiently while promot-ing a clean operation.
1.
2.
3.
4.
5.
6.
Step 1: Level the ground
Step 2: Block and level the separator
Step 3: Remove the conveyors and electrical panel
Step 4: Connect the electrical panel to the electrical source
Step 5: With proper motor ro-tation obtained, turn on the hydraulic system, lifting the separator into position
Step 6: Mount the conveyors and you are ready to begin separating!
Designed with the portable contractor in mind, the Fisher Air Separator is easily set up, disassembled, and transported. In a couple of hours, the Fisher Air Separator will be ready to clean and classify your aggregate materials.
Side Conveyor Portal
Out Conveyor Portal
Lower ConeAssembly
Louvers
FanAssembly
Top CylinderAssembly
Hopper, Chute & Feed Tube
Drive Assembly
Top Lid Assembly
Spindle Assembly
Reversal BearingAssembly
Fan Assembly
Feed Material
Fine Discharge
Course Discharge
Return AirLouvers
Air Currentwith Fines
Up-lifting ReturnAir Circulation
Top Cylinder Assembly
Operation is simple, effective, and requires very little training
A properly adjusted and fed Air Separator will maintain 100% of circulating air in the machine
The only air discharge from the machine is the air displace-ment from the material
Every separator built by Fisher Industries, whether it’s portable or stationary, receives the same careful craftsmanship and attention to detail. Utilizing rugged, bolt-on wear liners, the Fisher Air Separator is designed for minimal downtime.
0
20
40
60
80
100
3/8 #4 #8 #16 #30 #50 #100 #200
Perc
ent P
assi
ng
Product Size
Trap Rock
Separated Material
Feed Material0
20
40
60
80
100
3/8 #4 #8 #16 #30 #50 #100 #200
Perc
ent P
assi
ng
Product Size
Limestone
Separated Material
Feed Material
Product Size Feed Material Separated Material3/8#4#8
#16#30#50
#100#200
135 TPH at 1.5% moisture; Speed at 62 HzSand and Gravel Results:
10095.368.746.633.825.318.311.9
10094.867.642.126.716.6106.5
0
20
40
60
80
100
3/8 #4 #8 #16 #30 #50 #100 #200
Perc
ent P
assi
ng
Product Size
Sand & Gravel
Separated Material
Feed Material
Product Size Feed Material Separated Material3/8#4#8
#16#30#50
#100#200
90 TPH at 3% moisture; Speed at 70 HzLimestone Results:
10096.569.344.130
22.217.312.8
10096.966.435.717.89.26.55.1
In granite, limestone, trap rock, or sand and gravel, the Fisher Air Separator effectively removes unwanted fines from your aggregate material. In some cases, the Fisher Air Separator has cut the amount of #200 fines in half.
Product Size Feed Material Separated Material3/8#4#8
#16#30#50
#100#200
150 TPH at 2.5% moisture; Speed at 70 HzTrap Rock Results:
10095735440311812
10094.765.541.226.115.89.55.7
0
20
40
60
80
100
3/8 #4 #8 #16 #30 #50 #100 #200
Perc
ent P
assi
ng
Product Size
Granite
Separated Material
Feed MaterialProduct Size Feed Material Separated Material
3/8#4#8
#16#30#50
#100#200
70 TPH at 1% moisture; Speed at 60 HzGranite Results:
10010096.573.456.441.828.617.6
10010093.358.934.819.812.27.8
When processing natural fines with the Fisher Air Separator, a moisture content of three percent or less will provide the best results. In processing crusher fines, the Air Separator will run effectively at three to five percent moisture content.
Fisher Sand & Gravel Co. | General Steel & Supply Co. | Fisher Sand & Gravel - New Mexico, Inc. | Arizona Drilling & BlastingSouthwest Asphalt | Southwest Asphalt Paving | Fisher Grading & Excavation | Fisher Ready Mix3020 Energy Drive | Dickinson, ND 58601 | [email protected] | 701-456-9184 | 1-800-932-8740 | (fax) 701-456-9193
www.fisherind.com