Victor Taichung – an established ISO 9001 & 14001 companyVictor Taichung - an established ISO-9001 & 14001 company

Machine width 1.5 meters

Turning length 250 mm

Rapid feeds 30/30 m/min

Roller guideways

Servo turret

One-piece slant bed

Rear / Right chip disposal

Ready for unmanned operation

Art of recision & erformance

New & Narrow Lathe with High Performance

Vturn-NP16

R

VictorTaichungR

VictorTaichung

New & Narrow Lathe Machine width only Z-travel 250 mm High rapid feed 30 m/min 6" power chuck Rear chip disposal

Pursuit of Productivity

1488 mm (58.6")

1

Victor Taichung's own spindle Spindle output 11 kW (S3-15%)

1000 2000 3000 4000 5000 60001240 3722

Power (kW)

Speed (rpm)

S2 15min,S3 25%Operating Zone

7.5kW

5.5kW

S2 6

0min

,S3

40%

Ope

ratin

g Zo

ne

1654

S1 ContinuousOperating Zone2

4

6

8

10

12

14

16

11kW12.1kW

S3 15%Operating Zone

Max. acc. output

1000 2000 3000 4000 5000 6000

10

20

50

1240 3722

Speed (rpm)

Torque (Nm)

S2 15min,S3 25%Operating Zone

7.5

5.5

S2 6

0min

,S3

40%

Ope

ratin

g Zo

ne

1654

S1 ContinuousOperating Zone

57.8

42.4

70

84.8

93.2

11Kw12.1Kw

S3 15%Operating Zone

31.8

Max. acc. output

GM400GA350

Certificated Casting

35 mm (X/Z)Roller guides

Strong structure One piece slant bed

High rapid feeds 30/30 m/min

Roller type guideways

Meehanite casting

Servo driven Turret 3-piece coupling design without turret disk up/down

affords high pressure coolants without leakage

during indexing.

Turret indexing time 0.9 (T-T, opposite).

C-axis option is available with BMT-45 milling turret.

Coolants & chips disposal Coolant flush on Z-axis covers.

Cliff design minimizes chip built-up.

Rear disposal chip conveyor minimizes machine

width.

2

Standard &Optional Accessories

Fanuc 0i-TF (10.4") control

+ Manual Guide I (MGI) Right side for easy operation Manual Guide I for easy programming

Inverter type hydraulic tank reduces the temperature rise

Manual MT#3 tailstock(opt.)

Tool presetter & Part catcher (opt.)

Oil skimmer (opt.)

Fanuc 0i-TF (10.4")

Inverter hydraulic tankCoolant flush onto covers

3

O.D & Face tool

For direct mounting on turretTaper slice Mounting block

Face & O.D cutting tool holder

Face & I.D cutting tool holder Clamp blockI.D & Face tool

Turret disc

Boring bar / drill holder

Drill socket (MT#)

Boring bar sleeve

Boring bar sleeveLarge dia.boring bar

Drill

Small dia.boring bar

”U” Drill ”U” Drill socket ”U”-drill holder

Tooling accessories (Excl. BMT Turret)

C-axis ApplicationVturn-NP16CM with BMT-45 Milling Turret (Optional)

TOOLS \ MODEL Vturn-NP16Tool shank for turret disk 20 mm (3/4")

Maximum boring bar Dia. 32 mm (1 1/4")

Face + OD cutting tool holder 2Face + ID. cutting tool holder 1Boring bar holder32 mm (1 1/4") 640 mm (1 1/2") -Boring bar sleeve8 mm (5/16") 110 mm (3/8") 212 mm (1/2") 216 mm (5/8") 220 mm (3/4") 225 mm (1") 232 mm (1 1/4") -Drill socketMT1 Opt.MT2 1MT3 Opt.U drill holder32 mm (1 1/4") 140 mm (1 1/2") -U drill socket20 mm (3/4") 125 mm (1") 132 mm (1 1/4") -

O.D. tool : □20 (□3/4”)

Face & I.D. tool : □20 (□3/4”)

U-drillU-drill socket

Boring bar sleeve

Boring barsleeve

Drill socket

Live tool holder (0°)

Boring bar/drill holderI.D.ø40 (I.D. ø1-1/2”)

U-drill holderI.D.ø40 (I.D. ø1-1/2”)

Face & I.D. tool holder □20 ( □3/4”)

O.D. tool holder □20 ( □3/4”)

O.D. tool holder □20 ( □3/4”)

Live tool holder (90°)

I.D.ø32 (I.D.ø1-1/4”)I.D.ø25 (I.D.ø1”)I.D.ø20 (I.D.ø3/4”)I.D.ø16I.D.ø30I.D.ø32 (I.D.ø1-1/2”)I.D.ø25 (I.D.ø1”)I.D.ø20 (I.D.ø3/4”)I.D.ø16 (I.D.ø5/8”)

I.D.ø12 (I.D.ø1/2”)I.D.ø10 (I.D.ø3/8”)I.D.ø 8 (I.D.ø5/16”)I.D.ø 6I.D.MT1# O.D.ø40I.D.MT2# O.D.ø40 (I.D.MT2# O.D.ø1-1/2”)I.D.MT3# O.D.ø40 (I.D.MT3# O.D.ø1-1/2”)

Boring bar

Boring bar

Drill

Drill/mill DIN 6499(ER25)Collet

A A

29 2991

77.7

129

0

16.5

4-M8XP1.25X18(depth)Ø8(coolants)

1540 51

5.5 41 45

2929

12

Ø36Ø45

A-A section

A A

29 2991

77.7

129

0

16.5

4-M8XP1.25X18(depth)Ø8(coolants)

1540 51

5.5 41 45

2929

12

Ø36Ø45

A-A section

4

Built for Unmanned OperationBuilt in articulated robot EWR-03 Maximum part weight: 3 kg

Maximum part size: Ø120 x L.100 mm

Part loading/unloading time along chuck: 7 seconds.

Flexible work feeders for unmanned operation.

Robot with grippers

Work feeder (multiple pallets)

Work feeder (single pallet) Work feeder (vibrator)

1775

1611

940

237

1488 957 131 1055 1052-2552

55

Gantry Robot Mounted on machine base composes a compact cell

Heavier parts (> 3 kg) can be loaded

Part changeover time: 15 seconds (including door open/close time)

One robot can take care two lathes.

Two robots for two lathes increase production for the parts with

short cutting time.

1929

1611 17

7535

3

1488 318 814 131 1055 1052-2552

1081

.691

A

4483.2

66

StandardITEM\SPECIFICATION DESCRIPTIONControlled Axes:1. Controlled axes 2 Axes (X, Z)2. Simultaneous controlled axes 2 Axes3. Least input increment 0.001mm4. Least command increment 0.0005mm (X) / 0.001mm (Z)5. Command system Incremental / Absolute6. HRV Control HRV3+7. Unexpected disturbance torque detection (AIR-BAG) Std.8. Backlash compensation Std.9. Stored pitch error compensation Std.

Operation & Program Input:

1. Input / Output interface RS-232,PCMCIA Card, USB

2. Tool offset 99 sets3. Sequence number N5-Digit4. Program number O8-Digit5. Program name 31-characters6. M code function M3-digit7. S code function S4-digit8. T code function T4-digit9. Positioning G0010. Linear interpolation G0111. Circular interpolation G02, G0312. Programmable data input G1013. Plane selection G17~G1914. Inch / Metric conversion G20 / G2115. Reference position return G28, G3016. Thread cutting G32, G3417. Threading retract Std.18. Tool nose radius compensation G40~G4219. Work piece coordinate system G52~G5920. Macro, Sub program call G65, M98, M99 (10 folds nested)21. Multiple repetitive cycle I & II G70~G7622. Canned cycle for drilling G80~G8923. Canned cycles G90, G92, G9424. Program stop / end M00~M02 / M3025. Rigid tapping (Spindle) M2926. Manual Guide I Std.27. Optional blocks skip 2-9 Std.

Feed Function:1. Manual handle feed rate X1, X10, X1002. Rapid traverse rate F0, 25%, 50%, 100%3. Cutting feed rate 0~150%4. Spindle override 50~120%5. Feed er Minute / Revolution G98 / G99

Edit Operation:1. Part Program Storage Length (in total) 1280m / 512kB (0i / 32iB)2. Number of Registerable programs (in total) 400.3. Part Program Editing Std.

C Axis Function:1. Polar coordinate interpolation G112, G1132. Cylindrical interpolation G1073. CS contouring control Std.4. Spindle control with servo motor G96.45. Coordinate System Rotation Std.

OPTIONSWith hardware included 0i-TF1. Tool life management □

2. Program restart □

3. Data server (with PCB and ATA card) □

4. Fast Ethernet (100Mbps, available in Data server) □

5. CC Link (included Robot) □

6. PROFIBUS slave □

Without hardware included7. Part program storage length (5120m/2MB) □

8. Number of registerable programs 1000 □

9. Circular thread cutting (G35,G36) □

10. AICC-1 (G5.1 Q1, 40 blocks) □

11. AICC-2 (G5.1 Q1, 200 blocks) □

12. Helical interpolation (C-axis only) □

13. Arbitrary speed threading □

VICTOR Taichung’s FANUC 0i-TF 10.4” Control (Type I) Specifications

Milling Motor Output (2.2 kW)

0

5

10

15

20

25

Tbrq

ue (N

.m)

1000 2000 3000 4000

Speed--Torque Characteristics

Conti nuousOperating

IntermittentOperating

Speed (rpm) (opt.)(std.)

22

8

5000 6000

Optional Spindle Output (15 kW, S3-15%)

S2 15min,S3 25%Operating Zone

S2 60

min,S

3 40%

Opera

ting Z

one

S1 ContinuousOperating Zone

S3 15%Operating Zone

Max. acc. output

1000 2000 3000 4000 5000 60003722

Power (kW)

Speed (rpm)

2

4

6

8

10

12

14

16

12401654

7.5kW

11kW

15kW16.5kW

2481

S2 15min,S3 25%Operating Zone

S2 60min,S3 40%Operating Zone

S1 ContinuousOperating Zone

S3 15%Operating Zone

Max. acc. output

1000 2000 3000 4000 5000 6000

151240

Speed (rpm)

Torque (Nm)

1654

30

75

105

127115

85

57.7

43.3

77

Interference Chart / Operating Range

Machine Layout

35 35

20

25

20Ø490

Ø185

Ø205Ø185

Ø32

340

35 150(X-travel)

Ø260

Ø190

175

130 20

25.5

12.2

Ø420

20

(X-travel)

Ø420

Ø40

145 95 150

340

35 100 50

20

Ø200 Ø200

Ø177

6565 27

0.5

257.2

Ø180

Ø500

7.2

20.5

20(X

-axi

s ze

ro p

oint

)

(X-a

xis

stro

ke)

6" chuckMT#3

165

55

90

72.5

857 85

5

7

30

150130

125

35

250 (Z-axis stroke)220 (Z-axis zero point)

150 80

(Quill taper stroke of tailstock)

150(Stroke of tailstock)

200

Ø60

87

Vturn-NP16

Vturn-NP16CM

6"chuck

165

90

532 77 220(Z-axis zero point)30

250(Z-axis stroke)

7 20

150

3560

5(X

-axi

s ze

ro p

oint

)

(X-a

xis

stro

ke)

65

(Quill stroke) (Tailstock stroke)

MT#3150 80 150

Ø60

87

200

95 100

50

127.550

105

1275109

722

430 (door open)

14881718 (opt. 13kW motor)

1057-18731055

343

660 109

2108-3608

610

441

343

132

952

940

1511 17

7527

7

1082

940

237

1090

610 305 330 39

5149

850

510

5013

1

25025566040385

1488250

250

985

35

1988

100.5 97.5

1275109

722

430 (door open)

14881718 (opt. 13kW motor)

1057-18731055

343

660 109

2108-3608

610

441

343

132

952

940

1511 17

7527

7

1082

940

237

1090

88

16

08

04

01

TE

L: 0

4-2

47

33

32

6R

Machine Specifications

GB1GE16EAwas also marketed under the brand names (outside North America) andR

VictorTaichung

THE COMPANIESVICTOR-TAICHUNG

profile:Sales turnover: USD 138 mil’s (in 2015)*No. of employees: 831*Exchange rate: 1 USD=30 TWD.

UK ☐ Victor CNC (UK) Ltd. TEL : 44-1-706-648485 FAX : 44-1-706-648483

FRANCE ☐ Victor France TEL : 33-1-64772000 FAX : 33-1-64772063

GERMANY ☐ Victor GmbH TEL : 49-2261-478434 FAX : 49-2261-478327

MALAYSIA☐ Victor Machinery (M) SDN. BHD. TEL : 60-3-56337180 FAX : 60-3-56337191

THAILAND☐ Victor (Thailand) Co. Ltd. TEL : 66-2-9263735 FAX : 66-2-9032373

INDONESIA☐ PT. Victor Machinery Indonesia TEL : +62-21-88958504 FAX : +62-21-88958513

USA☐ Fortune International Inc. TEL : 1-732-2140700 FAX : 1-732-2140701

SOUTH AFRICA☐ Victor Fortune (PTY) Ltd. TEL : 27-11-3923800 FAX : 27-11-3923899

CHINA☐ Victor Taichung Machinery (Shanghai) TEL : 86-21-59768018 FAX : 86-21-59768009

TAIWAN http://www.or.com.tw E-mail :info@mail.or.com.tw☐ Victor Taichung Machinery Works Co., Ltd. Headquarters: 2088, Sec. 4, Taiwan Blvd., Taichung, Taiwan, R.O.C.

TEL : 886-4-23592101 FAX : 886-4-23592943

Overseas Marketing Division: TEL : 886-4-23580701 FAX : 886-4-23584541

PIMHTL VTL VMC HMC XMT

Item Unit Vturn-NP16 (CM)

CapacitySwing over bed dia. mm Ø570Standard turning dia. mm Ø185 (Ø200)Maximum turning dia. mm Ø260 (Ø200)Swing over carriage dia. mm Ø325Between centers mm 270Bar capacity (Hole thru draw bar) mm Ø42

Axis FeedsX axis travel mm 20+130 (50+100)Z axis travel mm 250Rapid feed - X / Z axis m/min 30 / 30Feed motor - X / Z axis kW 1.8 / 1.8JOG feed m/min X/Z: 0~1260

Ball screw dia. x pitch mm Ø25 x P10 (X)Ø40 x P10 (Z)

Guideway width - X / Z axis mm 35 / 35

SpindleSpindle speed rpm 6000Spindle nose (chuck) inch A2-5 (6")

Spindle motor power (cont./30min/15%) kW 5.5 / 7.5 / 11(opt. 7.5 / 11 / 15)

Spindle bearing inside dia. mm Ø90Spindle taper 1/20

TurretNo. of tools (live) 12 (12)Tool shank size mm □20Max. boring bar dia. mm Ø32 (BMT-45)Exchange time (T-T) sec 0.9 (opposite)Milling speed rpm 4000 (opt. 6000)Milling motor kW 2.2

Tailstock (Optional)Tailstock quill dia. mm Ø60Quill stroke mm 80Quill taper M.T. #3

MachineNC controller Fanuc 0i-TF (10.4")Coolant tank capacity L 160Power requirement kVA 23.8Machine dimension L x W x H(with chip conveyor) mm 1488 x 1956 (2108) x 1775Net weight kgs 2800

* Machine and controller specifications are subject to change without notice.

Standard accessories:‧Fanuc 0i-TF (10.4") with Manual Guide i‧Hydraulic chuck with soft jaws‧Chip conveyor (rear disposal)‧Fully enclosed splash guarding‧Tool holders (only for standard turret)‧Coolant flush on Z-axis cover‧3 step warning light

Optional accessories:‧Manual tailstock with power quill‧Chip conveyor (right disposal)‧Manual tool presetter‧Auto tool presetter‧Parts catcher (swing type)‧KITAGAWA® power chuck‧ Air conditioner for electrical cabinet (Panel

cooler)‧Higher pressure coolants‧Bar feeder interface‧Air blow‧Oil skimmer‧Oil mist collector‧Hard jaws‧Tailstock center‧Auto door‧ Separable chip conveyor (to save floor space

when drawn out)‧C-axis (Vturn-NP16CM)‧Robot system