vs-tmc-ad-01 edirectedfolders$michael ... sheets/polypad 2.0-datas… · product technical...
TRANSCRIPT
Polypad 2.0Product Description and uses
Adjustable paving support for pedestrian accessible roofs. Polypad 2.0 with integrated dumber and 1 extension collar.
300 cm2
� 15 kN (load applied along plot axis over 100% plot surface)
� 7.5 kN {load applied over 25% plot surface) 40-60 mm; 60-100mm; 100-140mm
Composition
High resistance Polypropylene
Polypad 2.0Base Surface Mechanical resistance at -20° C, 23° C and 50°C
Dimension Polypad 2.0Dimension Extension Collar (Rehausse) 40mm
Product Technical Information
Page 2/4
Adjustement devices: nut dedicated tool
Integrated damper
extension collars with Large body and clips for stability
Polypad 2.0 adjustement with dedicated adjustment tool
The adjustment is always downwards and never upwards in order to not brake the internal damper.
Procedure: 1/ Polypad 2.0 is placed in its higher position 2/ Concrete pavement is installed. 3/Polypad 2.0 position is adjusted downwards using the dedicated tool.
Article : POLYPAD 2.0 CLEF REGLAGE 5MM.
Product Technical Information
Page 3/4
Polypad 2.0 range
Height
Lower position
Upper position
40-60 mm 60-100 mm
(1) Up to 6 extension collars can be applied over Polypad 2.0.
Other Accessories compatibles with Polypad 2.0
Plaque support 50-60 MM
Rondelle amortisseur concrete pavement
Rondelle amortisseur for Daile Boise/ IPE
100-140 mm
Caillebotis plaque support PZ2 -
Extension Collar
40 mm (1)
Placadal PZ2 -
Product Technical Information
Page 4/4
Other informations
Modification(s)
Hazardous classification
Divers
Our company reserves the right to modify its composition as a result of technologic and experiments improvements. This product data sheet supersedes the previous edition, to obtain the up-date technical data sheet, please contact our technical department. It is not classified as dangerous according to the international regulation (ADR, RID, IATA, et RTMDR) This product is only a product technical data sheet, regarding each waterproofing design, please, consult the concerned technical agreement and in case of doubt contact our technical department.