vmeca vvacuum

VMECAVacuumVacuumSpeeder Module

Vacuum speeder module

Select Vacuum speedermodule

• Select Vacuum Cartridge ‐ Choose the non‐return valve option for sealed system applications to prevent immediate

Specifications subject to change without notice. - 3 - www.vmeca.com / www.vtec.dk

• Select Vacuum Cartridge

▶ Select a VSM (Vacuum Speeder Module) without a vacuum cartridge when using as a slave to another vacuum source; typically sealed applications or where fast response time is not required.

▶ Select a VSM with VTEC 2‐stage VC202 Mini Cartridge to /

p y pp ploss of vacuum and resulting release of product, etc due to an interrupted air supply.

▶ Select a VSM with the VTEC 3‐stage VC203 cartridge (vacuum flow up to 85 Nl‐min) for quick response time in high volume, sealed applications (i.e. large vacuum cups) or

provide sufficient vacuum flow (up to 41 Nl/min) for sealed applications (i.e. sheet metal handling) or for low volume applications (i.e. small vacuum cups). Optional non‐return valve available*

high volume, sealed applications (i.e. large vacuum cups) or for non‐sealed applications (i.e. cardboard handling) where high vacuum flow is required. Optional non‐return valve is available*

• Select mounting and mounting position

▶ Option "F" - Direct Plate Mounting exm. ①

5EA

Mount directly to a plate (top mounting only) using the (4) 4m screws. (5) G1/8 plugs also included.

▶ Option "M.." - M8 Male Mounting exm. ②

4EA

Mount using M8 male fixed at factory in one of 3 specified positions (top, right, left). (4) G1/8 plugs are included. Left and right side mounting provides a lower profile vs. top mounting.

▶ Option "P.." - T-Slot Frame Mounting exm. ③,④

4EA

p g ,

Mount to appropriate t‐slot frame in one of (3) positions (top, right, left) using (1) M8 27mm or (1) M6 22mm screw as specified with supplied nut and washers. (4) G1/8 plugs are included. Optional non‐return valve is available.*

TOP SIDE

LEFT SIDE

RIGHT SIDE

① ② ③ ④



VSM Example


Compressed air Vacuum

Guide pin

▲ To prevent the Vacuum Speeder Module from rotating when mounted in the top p p g p

position use a guide pin inserted into the M5 port on the top of the VSM andextended into the t‐frame slot.

Slave units

▲ Use a VSM (Vacuum Speeder Module) as a slave unit with vacuum supplied by

another VSM in sealed applications or in applications where quick response timeis not required.



VSM Example

• VACUUM RELEASE


Compressed air Vacuum

• VACUUM RELEASE

Inflow device

Vacuum

Vacuum release

AIR OFFAIRON

▲ Automatic faster release(blow‐off) by inflow device of outside air is available without any release

control valve or line. ( Type VSMR / Patent pending)

Vacuum Vacuum release flow

▲ Faster release (blow‐off) and efficient cleaning of suction cup filters can be achieved by adding

controlled compressed air to extra vacuum ports.



Series VSM..M V l l 90 kP ( 26 57 i H )Max. Vacuum level : ‐ 90 kPa (‐26.57 inHg)

Max. Flow rate : 85.8 Nl/min (3.03scfm)

Supply air pressure : 3~6bar , max 7bar (43.5~87psi , max 101.5psi)

Air consumption : 20~32 Nl/min (0.7 ~ 1.13 scfm)

Supply air type : Dry compressed air

Working Temp : 20℃ ~ 80℃Working Temp. : ‐ 20℃ ~ 80℃

Noise level : 55 ~ 65dBA

Main Advantages

• Efficient individual and independent point-of-use vacuum.• Extremely quick response• Multiple connection ports available

Order No.

p p• Maintains vacuum despite fluctuations and drops in air pressure.• VMECA TWOFOLD SILENCERPT assures low noise levels (about 30% lower than conventional silencer)

① 203 - Vacuum cartridge VC203

incl twofold silencer

VSM 203 - PT8.. VBF80 PU - 38M

① ②▲ See page 10~24

Vacuum cartridge

• incl. holding plug 202 N - Vacuum cartridge VC202 with non-return valve incl. holding plug

incl. twofold silencer 203 N - Vacuum cartridge VC203 with non-return valve incl. twofold silencer 202 - Vacuum cartridge VC202

② Mount and mounting position

F - 4x screw M4 top,5x plug G1/8" (direct mount)

020 - No vacuum cartridge (slave unit)

MT8 - M8 16mm screw top, 4x plug G1/8" incl. mounting kit

•

PT6 - M6 22mm screw top, 4x plug G1/8" incl. profile kit with jam nut PL6 - M6 22mm screw left, 4x plug G1/8" incl. profile kit with jam nut

PT8 - M8 27mm screw top, 4x plug G1/8" incl. profile kit with jam nut PL8 - M8 27mm screw left, 4x plug G1/8" incl. profile kit with jam nut PR8 - M8 27mm screw right, 4x plug G1/8" incl. profile kit with jam nut

p, p g g

MR8 - M8 16mm screw right, 4x plug G1/8" incl. mounting kit ML8 - M8 16mm screw left, 4x plug G1/8" incl. mounting kit

, p g p j PR6 - M6 22mm screw right, 4x plug G1/8" incl. profile kit with jam nut



Series VSMR..M V l l 90 kP ( 26 57 i H )Max. Vacuum level : ‐ 90 kPa (‐26.57 inHg)

Max. Flow rate : 85.8 Nl/min (3.03scfm)

Supply air pressure : 3~6bar , max 7bar (43.5~87psi , max 101.5psi)

Air consumption : 20~32 Nl/min (0.7 ~ 1.13 scfm)

Supply air type : Dry compressed air

Working Temp : 20℃ ~ 80℃Working Temp. : ‐ 20℃ ~ 80℃

Noise level : 55 ~ 65dBA

Main Advantages

• Efficient individual and independent point-of-use vacuum.• Extremely quick response• Multiple connection ports available• Quick release system without release control valve• Maintains vacuum despite fluctuations and drops in air pressure.• VMECA TWOFOLD SILENCERPT assures low noise levels (about 30% lower than conventional silencer)

Order No.

VSMR 203 - PT8.. VBF80 PU - 38M

① ②▲ See page 10~24

①

•

202 - Vacuum cartridge VC202 incl. holding plug

203 - Vacuum cartridge VC203 incl. twofold silencer

Vacuum cartridge

② Mount and mounting position

F - 4x screw M4 top,5x plug G1/8" (direct mount)

MT8 - M8 16mm screw top, 4x plug G1/8" incl. mounting kit

•

PT6 - M6 22mm screw top, 4x plug G1/8" incl. profile kit with jam nut PL6 - M6 22mm screw left, 4x plug G1/8" incl. profile kit with jam nut

g g ML8 - M8 16mm screw left, 4x plug G1/8" incl. mounting kit MR8 - M8 16mm screw right, 4x plug G1/8" incl. mounting kit PT8 - M8 27mm screw top, 4x plug G1/8" incl. profile kit with jam nut PL8 - M8 27mm screw left, 4x plug G1/8" incl. profile kit with jam nut PR8 - M8 27mm screw right, 4x plug G1/8" incl. profile kit with jam nut

, p g p j PR6 - M6 22mm screw right, 4x plug G1/8" incl. profile kit with jam nut


Technical data


Vacuum flow for Cartridge VC202 P / VC203 S


Vacuum flow for Cartridge VC202 P / VC203 S

Evacuation time for Cartridge VC202 P / VC203 S

40

45

0.17 MPa 0.22 MPa0.314 MPa 0.4 MPa

90

100

0.17 MPa 0.22 MPa0.314 MPa 0.4 MPa

Vacuum flow VC202 P Vacuum flow VC203 S

5

10

15

20

25

30

35

40

Nl/m

10

20

30

40

50

60

70

80

Nl/m

0

0 10 20 30 40 50 60 70 80-kPa

0

0 10 20 30 40 50 60 70 80-kPa

8

0.17 MPa 0.22 MPa0.314 Mpa 0.4 Mpa

8

0.17 MPa 0.22 MPa0.314 MPa 0.4 MPa

Evacuation time VC202 P Evacuation time VC203 S

1

2

3

4

5

6

7

s/l

1

2

3

4

5

6

7

s/l

0

1

10 20 30 40 50 60 70 80-kPa

0

1

10 20 30 40 50 60 70 80-kPa


Dimension

▼ VSMR 203


▼ VSM 203


▼ VSMR 203..

25.2

[0.9

92]

A

25.2

[0.9

92]

A

▼ VSM 203..

84 [3.305] 26 [1.023]

2

76 [2.991] 41 [1.613]2

Mounting A

17 [

0.6

69]

30 [

1.1

81]

A

25.5

[1.0

03]

39 [

1.5

35]

A

22

Mounting

M□8

P□6

P□8

A

1627

1. Compressed air: 3 x G1/8"2. Vacuum: 1 x G3/8" and G1/8"3. Exhaust

▼ VSMR 202.. ▼ VSM 202..

Measure unit : mm [inch]

25.2

[0.9

92]

A

25.2

[0.9

92]

A

43 [1.692] 41 [1.613] 51 [2.007] 26 [1.023]

A

Mounting A

M□8 16

25.5

[1.0

03]

39 [

1.5

35]

A

17 [

0.6

69]

30 [

1.1

81]

A

1 Compressed air: 3 x G1/8"

P□6 22

M□8 16P□8 27

1. Compressed air: 3 x G1/82. Vacuum: 1 x G3/8" and G1/8"3. Exhaust



How to select vacuum pad



▶See page 11 ▶See page 15 ▶See page 13

▶See page 17,19

▶See page 21 ▶See page 23

Material and characteristic of vacuum pad


VB Type (Bellows)



O d NOrder No.

Pad ØAir

consumption,Lifting force (kg)-Perpendicular

Technical Data

at 0.314 MPa -20kPa -60kPa -90kPaVB30VB40VB50

VB75(B)

1.222.243.367.65

26 Nl/min(0.918 scfm)

2.243.976.6317.04

2.755

8.3623.06


Dimmension



397]

[1.7

51]

358]

1.7

12]

35.5

[1.

44.5

[

34 [1.338]Ø ?43 [1.692]

34.5

[1.3

43.5

[

Ø

VB30..38M VB40..38M

2]

086]

68]

.322]

?53 [2.086]

43 [

1.6

92

53 [

2.0

Ø ?78 [3.069]

50 [

1.9

6

59 [

2

Ø


VB50..38M VB75..38M



VBF Type (Bellows & Flat)

O d NOrder No.

Lifting force (kg)-Perpendicular

Lifting force (kg)-Parallel

Airconsumption,Pad Ø

Technical Data

14.9 27.1 30.9

-20kPa -60kPa -90kPa8.94 16.26 18.54

-90kPa6.84 12.84 16.92

11.92 21.68 24.72 9.12 17.12 22.5611.4 21.4 28.2

-20kPa -60kPa

VBF80

at 0.314 Mpa

VBF100



VBF 60


Dimmension



1.6

33]

[2.0

46]

5 [

1.9

48]

60 [

2.3

61]

?63 [2.479]

41.5

[1

52

Ø ?84 [3.305]

49.5

6

Ø

VBF60 P(U)‐38M VBF80 P(U)‐38M

2.1

64]

.5 [

2.5

77]

?103 [4.053]

55 [

2

65.

Ø


VBF100 P(U)‐38M



VBL Type ( Long Bellows )

O d NOrder No.

Pad ØAir


Technical Data


VBL30 0.06 0.16 -VBL40 0.11 0.22 -VBL50

at 0.314 MPa -20kPa -60kPa -90kPa

0.17 0.43 -


Dimmension



1.5

46]

[1.9

01]

[1.9

40]

8.3

[2.2

94]

?30 [1.181]

39.3

[1

48.3

Ø ?40 [1.574]

49.3

58

Ø

VBL30..38M VBL40..38M

2.3

22]

9 [

2.7

15]

?50 [1.968]

59 [

2

69

Ø


VBL50..38M



VF Type (Flat)

O d NOrder No.

Pad ØAir



Technical Data

6.12 11.22 14.288.84 15.98 19.72

VF 110

8.16 20.4 27.5510.2 27.83 37.41

14.28 42.58 57 14

1.53 2.55 3.06VF 30

2.44 4.08 5.126 Nl/min(0.918 scfm)VF 75

VF 90

VF 50 3.67 7.55 9.79

1.63 2.04VF 40 2.04 4.08 5.1

-20kPa -60kPa -90kPa1.22 2.55 3.16 1.12

14.28 25.51 30.61

at 0.314 Mpa -20kPa -60kPa -90kPa

VF 110 14.28 42.58 57.14 14.28 25.51 30.61


Dimmension



3 [

0.5

12]

22 [

0.8

66]

9.3

[0.7

59]

28.3

[1.1

14]

23.9

[0.9

40]

33.9

[1.3

34]

13

?32 [1.259]Ø

19

?42 [1.653]Ø ?53 [2.086]

2

Ø

VF30..38M VF40..38M VF50..38M

[1.0

23]

5 [

1.3

77]

[1.0

03]

.5 [

1.3

58]

77 [3.030]

26 [ 3

Ø 92 [3.620]25.5

34

Ø

VF75..38M VF90 P(U)..38M

41]

[1.7

71]

29 [

1.1

4

112 [4.407]

45 [

Ø

Measure unit : mm [inch]VF110..38M



VFC Type (Flat Curve)

O d NOrder No.

Pad ØAir

consumption,t 0 314 M

Lifting force (kg)-Perpendicular


Technical Data

28.57


VFC 100 12.75 35.71 46.93 12.24 23.97

8.16 20.4 27.55VFC 90 9.35 24.82 32.65 9.52 21.59 28.89

8.67 11.12VFC 60 5.5 14 18.5 5.4 14 18.9VFC 50 3.57 8.67 12.75 3.57

VFC 75 7.65 19.37 25.51

at 0.314 Mpa -20kPa -60kPa -90kPa -20kPa -60kPa -90kPa


Dimmension



]

?50 [1.968]

16.5

[0.6

49]

26.5

[1.0

43]

Ø ?60 [2.361]

21.5

[0.8

46]

31.5

[1.2

40

Ø

VFC50..38M VFC60..38M

[ ]

22 [

0.8

66]

32 [

1.2

59]

Ø [ ]

34.5

[1.3

58]

43.5

[1.7

12]

Ø

?75 [2.951]Ø ?90 [3.542]Ø

VFC75..38M VFC90 P(U)..38M

40 [

1.5

74]

49 [

1.9

28]

?100 [3.935]Ø


VFC100..38M



VOU Type ( Oval Universal )

O d NOrder No.

Pad ØAir


Technical Data

at 0.314 MPa

VOU 15X4526 Nl/min

(0.918 scfm)VOU 20X60

3.27

2.05 4.85 6.35

-20kPa -60kPa -90kPa

1.02 2.1

Specifications subject to change without notice. - 21 - www.vtec.dk

Dimmension



24 [

0.9

44]

33 [

1.2

99]

15 [

0.5

90]

45 [1.771]

VOU 15X45 38MVOU 15X45..38M

25.7

[1.0

11]

34.7

[1.3

65]

[0.7

87]

20

60 [2.361]

Measure unit : mm [inch]VOU 20X60..38M



VOC Type ( Oval Curve )


O d NOrder No.

Pad ØAir



Technical Data

28 52VOC 60X180 19.1 54.2 75.7 27 54.2 74

16.4 21VOC 35X110 6.25 16.7 21.7 8.6 20.5 26VOC 35X90 5 13.4 17.4 6.9

VOC 60X140 13.4 38 5326 Nl/min

(0.918 scfm) 18.9

at 0.314 Mpa -20kPa -60kPa -90kPa -20kPa -60kPa -90kPa


Dimmension



23.5

[0.9

25]

32.5

[1.2

79]

23.5

[0.9

25]

32.5

[1.2

79]

114 [4.486]

37 [

1.4

56]

94 [3.699]

37 [

1.4

56]

31.5

[1.2

40]

40.5

[1.5

94]

VOC 35X90..38M VOC 35X110..38M

60 [

2.3

61]

140 [5.509]

VOC 60X140..38M

31.5

[1.2

40]

40.5

[1.5

94]

180 [7.083]

60 [

2.3

61]


VOC 60X180..38M


VMECA Products Line-up

Vacuum Pads(Suction Cups)(Suction Cups)

• VMECA Service Networks

Germany Asia USAEast: VtecUSA Inc.2967 Nationwide Pkwy., Unit#3Brunswick, OH 44212, USATel: +1-330-220-8983Fax: +1-330-220-6230http://www.vtecusa.come-mail: [email protected]

V’tec Vakuum Technologie GmbHAuf dem Brühl6D-72658 Bemflingen, GermanyTel: +49(0)7123/932834Fax: +49(0)7123/932865http://www.vtec.dke-mail: [email protected]

W t Vt USA I

VTEC/KPS Co., Ltd.RM206.Saehan Venture World B/D113-15, Shiheung-dong, Keumchun-guSeoul, KoreaTel: +82-2-2617-5008 (Rep.)Fax: +82-2-2617-5009http://www.vtec.dke-mail: vtec@vtec dk

Germany Asia USA

West: VtecUSA Inc.2965 San Marino ST.Los Angeles, CA 90006Tel: +1-213-258-7114Fax: +1-213-738-1980http://www.vtec.dke-mail: [email protected]

e mail: [email protected]

Distributor

• Argentina • Australia • Austria • Belgium • Canada • China • Colombia •Denmark • France • India • Iran • Israel • Italy • Lebanon •Malaysia • Mexico• Netherlands • New Zealand • Norway • Poland • Sweden • Switzerland • Singapore • Taiwan

Thailand Turkey UK Japan• Thailand • Turkey • UK • Japan

Copyright © KPS.,Co.Ltd. All Right Reserved. Sept.2008 (0809024 US)

vmeca vvacuum

Documents