CURRICULUM VITAE

VINAYAK NAIK B.E Mechanical Dubai – UAE Email: vinayaknaik007@gmail.comMobile No: +971 564894687 +91 7899253175

OBJECTIVE

Seeking a position as a Sr. Quality Assurance Engineer in a challenging environment where my education and 7.6 years of Technical and Manufacturing experience can be utilized. I am a dedicated and innovative individual, and am certain that I will prove an immediate asset any company where technical competence and perseverance are in demand.

PROFESSIONAL SKILLS

Responsible for the preparation and getting client approval of Project Quality Assurance Plan (PQAP), Inspection Test Plan (ITP), Work Method Statement (MS), Risk Assessment (RA), Inspection Report and Check List in accordance with contract specification and project quality management control system requirements.

ASNT Level II in Ultrasonic Testing (UT) and Magnetic Particle Testing (MPT). Certified Internal Quality Auditor of ISO 9001:2008. Preparation of Welding Procedure Specification (WPS), Procedure Qualification Record

(PQR), Welder Performance Qualification (WPQ) and Welding Manual. Checking weld joint preparation, fit up, alignment & dimensional inspection as per drawings. Monitoring Welding activities as per WPS and Review of approved WPS and PQR. Witness of Welder Qualification Test (WQT) and Procedure Qualification Test. Preparation of joints for NDE as per required Inspection Class. Interpretation of Radiographic films and NDT reports. Familiar with Welding processes as GTAW, SMAW, MIG and FCAW. Awareness of ASME codes & Materials. Knowledge of AWS D 1.1 Structural Welding Code. Gauges & instruments calibration planning and maintaining records. Thorough knowledge of Structural Material & Heavy Fabrication process. Knowledge about the Drawing, GD&T and Part measurement. Maintain the quality documents as per QMS requirements. Working with team in root cause analysis and instituting corrective & preventive action. Customer feedback information collection & analysis the root cause to customer satisfaction. 8-D Problem solving techniques. Possesses the “Right First Time” attitude. Contributing to 5S, QC Tools, SPC, TQM, KAIZEN, POKA-YOKE etc. Basic knowledge of Quality standards like ISO 9001, OHSAS etc. Participation in industrial training programs and other interpersonal development programs.

WORK EXPERIENCE1] Vision Tec LLC (Group of BW Interiors), Ras Al Khaimah, UAE.

Duration -From -21st May 2014 to till date Designation –Sr. QA/QC EngineerBW Interiors is well established Interiors contractor operating in the GCC Region with offices

in Dubai, Abu Dhabi and Doha. BW group in the enviable position of having its own Glass, Aluminum and Metal Works, Joinery, Marble, Stone and Electro Mechanical.

Roles and Responsibility:

Quality system implementation and maintenance as per company Quality policy. Stage wise inspection of fabrication, assembly, painting and coating activities as per the

specification & Quality standards. Follow ITP/QCP as sign off as applicable. Carryout the Welding inspection before, during and after welding operation as per approved

test plan, drawing, project specification and Verification of weld repair work. Develop a centralize data bank of company’s all WPS and supporting PQRs, LAB test reports

all available code & standards to fulfill timely need of any project. Planning / organizing and checking of work progress and schedules to meet the deadlines /

target dates and implementing QA/QC plans. Prepare Quality Control Procedure, Method Statement, and ITP’s according to project / client

requirements and follow-up for its approval. Keeping & maintaining record of IS/ISO/any other local/international standards. Verify the incoming material with MRQ, LPO and Purchase specification. Verify maintenance of the traceability by unique number for the accepted material and

document the same in martial traceability sheet as required for the project. Interface and co ordinate with clients and third party inspection for production, QC matters

and close-outs of Non Conformance Reports (NCR). Conduct snag inspection together with client and arrange schedules for rectification. Follow technical guidelines, inspection procedure and QA / QC manual to confirm materials

and installation in compliance with project specification. Verify that inspection and testing are carried out in accordance to the Inspection and Test

Plans (ITP), Method Statements and Specifications. Carry out site surveillance to ensure that only proper methods of working are used. Liaise with the Client /Consultants /Subcontractors /Suppliers on Quality related matters. Generate client Request for Inspection (RFI) where required providing sufficient notice for

hold, witness and inspection points. Carry out subcontractor audit and review of Quality management and control programs. Perform Internal Quality Audit as per the documented procedure and make the internal

Quality Audit analysis Report. Informing the production, production planning and sites about any revised drawing, make

sure to stamp the old one with obsolete. Preparing the material submittal samples through coordinating with concerned department. Prepare the daily reports and weekly assessment sheets & Participate in Quality meetings. Responsible to monitor the completion of inspection records and other Quality control

documents and preparation of final document dossier for final client submission.

PROJECT PERFORMED / CLIENTS S.S Metal Works - Client: The H hotel, Dusty’s , Cocktail Kitchen and Nusret Burger. 2 Ton Capacity Trailers – Client :Arc International Middle East LLC (Ras Al Khaimah) Stainless Steel Works at Restaurant - Client :Zuma ,Rosewood, Four seasons, Bu Berger S.S Metal Works - Client: Embassy Garden, One Tower Bridge (U.K) & Shangri-La, Dubai. S.S Metal Works - Client: Currency House, Trilogy, Katana Restaurant and Irish Village. Elevator Bucket Shaft Casing- Client :Albana Cement Factory (Ras Al Khaimah) Belt Conveyor 24 Mtr Length- Client :Siji Engineering (Fujairah) Staircase & Platforms - Client :Lafarge Emirates Cement Co. (Fujairah) M S Structural Works – Client :Falcon Breeding Building (Fujairah) , German Steel (Ajman),

MAEG Construction Spa (Italy) and Engineer’s Office- Dubai2] Sparkline Equipments Private Limited, Pune (3 Yr. 10 Months)

Duration -From -3rd July 2010 to 14th May 2014. Designation –Sr. Quality Assurance EngineerSparkline Equipments PVT Ltd is a manufacturer of Industrial Material Handling Equipments

such as Cranes, Conveyors, Manipulators, EMS, and Fixtures etcRoles and Responsibility:

Study and understand the standards for material, fabrication, assembly, painting & testing and keep proper documentation of the same.

Stage wise inspection of fabrication, assembly and painting activities as per the specification

and quality standards. Marking of same and getting them rectified. Carryout the Welding inspection before, during and after welding operation as per approved

test plan, drawing, international standard and project specification. Verification of weld repair work. Planning / organizing and checking of work progress and schedules to meet the

deadlines/target dates & implementing QA/QC plans. Ensure launch programs meet all timelines with final customer pre buy off inspection.  Monitoring shop floor activity through audits and supervision. Prompt rectification and remedial action as per quality standard whenever deviations from

the specification. Dimensional Inspection of Machine components received from various parties. Keeping and maintaining record of IS/ISO/any other local/international standards. Set the process for self-inspection by workers. Supplier Quality development and control, Process audits. Vendor evaluation audit and Vendor rating. Verifying inward material inspection, material TCs, RT & UT reports and documentation. Keeping coordination regarding Acceptance, Rework or Rejection if any between Vendors

and Purchase / Vendor Development Department. Prepare work instruction and checklist. Assist production team in resolving engineering issues. Inspection Reports / GRN clearance in SAP System. Interaction with customer for inspection, trials and feedback to Engineering. Continues improvement in product Quality.

PROJECT PERFORMED (Pre buy off Inspection): Ford India Pvt Ltd (Sanand) Daimler India Commercial Vehicles Pvt. Ltd (Chennai) ABB India Pvt Ltd ( Baroda ) Tata motors (Pune, Lucknow, Dharwad) JCB (Pune) Siemens rolling stock Pvt Ltd (Aurangabad)

3] Arvind Motors Private Limited, Mangalore. (1 Yr. 2 Months)Duration -From -1st July 2005 to 5th August 2006Designation – Workshop Supervisor

This company is authorized dealers of TATA commercial vehicle Dealers.

Roles and responsibility:

Provide engineering support for the workshop overhaul activities to ensure that components are refurbished correctly and returned to service safely and reliably.

Diagnose faults in Components / System of the Vehicle. Servicing & testing of Automobile as well as components.

SOFTWARE SKILLSMICROSOFT OFFICEAUTO CADANSYSMASTERCAM XERP

KEY DELIVERABLES

Continuous monitoring of Quality of incoming components and process through IPQP (In Process Quality Control Plan), Process Audits, various tools and techniques like 7 QC Tools.

Responsible for reduce rework and rejection. (Rejection review & Inspection of Such parts or Analysis)

Adequate knowledge in ASME code (ASME Sec. IX, ASME Sec. V, and AWS D1.1). Non-conformance report maintaining and analyzing problem.

ACADEMIC CREDENTIALS

B.E in Mechanical Engineering from Bahubali College of Engineering (affiliated to VTU), Shravanabelagola, secured 1st class with 62.14%. Certificate attested for embassy of the United Arab Emirates -UAE

DIPLOMA in Automobile Engineering from S V Polytechnic, Kumta with 56.16% II PUC in Commerce from SDM College, Honnavar. S.S.L.C from New English School, Honnavar.

QUALITY CERTIFICATES

Qualified in NDT level II in Ultrasonic Test (UT) and Magnetic Particle Test (MPT) as per SNT-TC-1A at Quality NDT institute ,Pune with 84.25 % Aggregate (Certification valid up to 2017)

Certified Internal Quality Auditor of ISO 9001:2008 from Integrated Management Consultants FZE , Sharjah , UAE

LANGUAGES KNOWN

Fluent in English, Hindi and Kannada.

PERSONAL DETAILS Name Vinayak NaikFather’s Name Venkatraman NaikDOB 07th Jan 1985Gender MaleMarital Status SingleNationality IndianPassport No G9792862 (Date of issue : 24/07/2008)

(Date of exp : 23/07/2018)Present Address P.O.Box No.9027, Al Ghail Industrial Area,

Ras Al Khaimah-UAEPermanent Address A/P:Mugwa,Tq:Honnavar

Dist: Uttar Kannada,KARNATAKA-581334INDIA

I hereby declare that the above furnished details are true to the best of my knowledge and belief.

DATE: 09/01/2017 Yours Faithfully,

PLACE: Ras Al Khaimah -UAE (VINAYAK NAIK)