vensoft technologies secured wireless communication for industrial automation and control

VENSOFT Technologies www.ieeedeveloperslabs.in Email: [email protected] Contact: 9448847874 VENSOFT Technologies www.ieeedeveloperslabs.in Email: [email protected] Contact: 9448847874 Secured Wireless Communication for Industrial Automation and Control ABSTRACT: Wireless based industrial automation is a prime concern in our day-to-day life. The approach to Zigbee Based Wireless Network for Industrial Applications standardized nowadays. In this paper, we have tried to increase these standards by combining new design techniques to wireless industrial automation.o The personal computer based wireless network for industrial application using Zigbee can be adopted at micro and macro Industries, it has various types of Processors and Microcontrollers. Here Microcontrollers, FIRE Sensors, LPG gas detector, used. The system is fully controlled by the Personal Computer interfacing with Zigbee Protocol. All the processor and controllers are interconnected to personal computer through Zigbee. The Personal Computer will continuously monitor all the Data from remote processing unit. If any error is found the personal computer takes necessary action. Here star topology four node Zigbee network is tried. The first Zigbee is connected to the personal computer it acts as full function devices and is used to receive data from other nodes. The second, used to control the device and lamp i control respectively. All the Zigbee’s are interconnected with processing unit through RS232 protocol. This project uses regulated 5V, 750mA power supply. 7805 three terminal voltage regulator is used for voltage regulation. Bridge type full wave rectifier is used to rectify the ac output of secondary of 230/18V step down transformer.

Upload: vensoft-technologies

Post on 15-Nov-2014

334 views

Category:

Education

2 download

Report

Download

Tags:

Embed Size (px):

DESCRIPTION

IEEE Developers Labs (A Division of Vensoft Technologies) is a Electronic Design Services (EDS) for VLSI / EMBEDDED and MATLAB, delivering a wide variety of end- to -end services, including design, development, & testing for customers around the world. With proven expertise across multiple domains such as Consumer Electronics Market, Infotainment, Office Automation, Mobility and Equipment Controls. IEEE Developers Labs (A Division of Vensoft Technologies) is managed by Engineers / Professionals possessing significant industrial experience across various application domains and engineering horizontals.Our engineers have expertise across a wide range of technologies, to the engineering efforts of our clients. Leveraging standards based components and investments in dedicated test lab infrastructure, we offer innovative, flexible and cost-effective services and solutions.

TRANSCRIPT

VENSOFT Technologies www.ieeedeveloperslabs.in Email: [email protected] Contact: 9448847874

Secured Wireless Communication for Industrial Automationand Control

ABSTRACT:

Wireless based industrial automation is a prime concern in our day-to-daylife. The approach to Zigbee Based Wireless Network for Industrial Applicationsstandardized nowadays. In this paper, we have tried to increase these standards bycombining new design techniques to wireless industrial automation.o

The personal computer based wireless network for industrial applicationusing Zigbee can be adopted at micro and macro Industries, it has various types ofProcessors and Microcontrollers. Here Microcontrollers, FIRE Sensors, LPG gasdetector, used.

The system is fully controlled by the Personal Computer interfacing withZigbee Protocol. All the processor and controllers are interconnected to personalcomputer through Zigbee. The Personal Computer will continuously monitor allthe Data from remote processing unit. If any error is found the personal computertakes necessary action. Here star topology four node Zigbee network is tried.

The first Zigbee is connected to the personal computer it acts as full functiondevices and is used to receive data from other nodes. The second, used to controlthe device and lamp i control respectively. All the Zigbee’s are interconnected withprocessing unit through RS232 protocol.

This project uses regulated 5V, 750mA power supply. 7805 three terminalvoltage regulator is used for voltage regulation. Bridge type full wave rectifier isused to rectify the ac output of secondary of 230/18V step down transformer.