vector mechanics for engineers: statics - faculty of
TRANSCRIPT
VECTOR MECHANICS FOR ENGINEERS:
STATICSSTATICS
Statics of Particles
J. Walt OlerTexas Tech UniversityTexas Tech University
© 2007 The McGraw-Hill Companies, Inc. All rights reserved.
Vector Mechanics for Engineers: Statics
EighthEdition
Contents
Introduction Sample Problem 2.3IntroductionResultant of Two ForcesVectors
Sample Problem 2.3Equilibrium of a ParticleFree-Body Diagrams
Addition of VectorsResultant of Several Concurrent
Forces
Sample Problem 2.4Sample Problem 2.6R t l C t i SForces
Sample Problem 2.1Sample Problem 2.2
Rectangular Components in SpaceSample Problem 2.7
Rectangular Components of a Force: Unit Vectors
Additi f F b S iAddition of Forces by Summing Components
© 2007 The McGraw-Hill Companies, Inc. All rights reserved. 2 - 2
Vector Mechanics for Engineers: Statics
EighthEdition
Introduction
• The objective for the current chapter is to investigate the effects of forces on particles:on particles:
- replacing multiple forces acting on a particle with a single equivalent or resultant force,
- relations between forces acting on a particle that is in a state of equilibrium.
• The focus on particles does not imply a restriction to miniscule bodies. Rather, the study is restricted to analyses in which the size and shape of h b di i i ifi h ll f b d bthe bodies is not significant so that all forces may be assumed to be
applied at a single point.
© 2007 The McGraw-Hill Companies, Inc. All rights reserved. 2 - 3
Vector Mechanics for Engineers: Statics
EighthEdition
Resultant of Two Forces
• force: action of one body on another; characterized by its point of application, magnitude, line of action, and sense.
• Experimental evidence shows that theExperimental evidence shows that the combined effect of two forces may be represented by a single resultant force.
• The resultant is equivalent to the diagonal of a parallelogram which contains the two f i dj t lforces in adjacent legs.
• Force is a vector quantity.
© 2007 The McGraw-Hill Companies, Inc. All rights reserved. 2 - 4
Vector Mechanics for Engineers: Statics
EighthEdition
Vectors• Vector: parameters possessing magnitude and direction
which add according to the parallelogram law. Examples: di l t l iti l tidisplacements, velocities, accelerations.
• Scalar: parameters possessing magnitude but not direction Examples: mass volume temperature
• Vector classifications:- Fixed or bound vectors have well defined points of
direction. Examples: mass, volume, temperature
application that cannot be changed without affecting an analysis.
- Free vectors may be freely moved in space without ee vecto s ay be ee y oved space w t outchanging their effect on an analysis.
- Sliding vectors may be applied anywhere along their line of action without affecting an analysisline of action without affecting an analysis.
• Equal vectors have the same magnitude and direction.
N ti t f i t h th it d
© 2007 The McGraw-Hill Companies, Inc. All rights reserved. 2 - 5
• Negative vector of a given vector has the same magnitude and the opposite direction.
Vector Mechanics for Engineers: Statics
EighthEdition
Addition of Vectors• Trapezoid rule for vector addition
• Triangle rule for vector addition
C• Law of cosines,
B
C
C
QPRBPQQPR
rrr+=
−+= cos2222
• Law of sines,CBA sinsinsin
==B ARQ
• Vector addition is commutative,
PQQPrrrr
+=+
• Vector subtraction
© 2007 The McGraw-Hill Companies, Inc. All rights reserved. 2 - 6
Vector Mechanics for Engineers: Statics
EighthEdition
Addition of Vectors
• Addition of three or more vectors through repeated application of the triangle rulerepeated application of the triangle rule
• The polygon rule for the addition of three or more vectors.
• Vector addition is associative,
( ) ( )SQPSQPSQPrrrrrrrrr
++=++=++ ( ) ( )QQQ
• Multiplication of a vector by a scalar
© 2007 The McGraw-Hill Companies, Inc. All rights reserved. 2 - 7
Vector Mechanics for Engineers: Statics
EighthEdition
Resultant of Several Concurrent Forces• Concurrent forces: set of forces which all
pass through the same point. p g p
A set of concurrent forces applied to a particle may be replaced by a singleparticle may be replaced by a single resultant force which is the vector sum of the applied forces.
• Vector force components: two or more force vectors which together have the same effectvectors which, together, have the same effect as a single force vector.
© 2007 The McGraw-Hill Companies, Inc. All rights reserved. 2 - 8
Vector Mechanics for Engineers: Statics
EighthEdition
Sample Problem 2.1p
SOLUTION:
• Graphical solution - construct a parallelogram with sides in the same direction as P and Q and lengths in Q gproportion. Graphically evaluate the resultant which is equivalent in direction and proportional in magnitude to the the
The two forces act on a bolt at A. Determine their resultant.
and proportional in magnitude to the the diagonal.
• Trigonometric solution - use the triangle g grule for vector addition in conjunction with the law of cosines and law of sines to find the resultant.to find the resultant.
© 2007 The McGraw-Hill Companies, Inc. All rights reserved. 2 - 9
Vector Mechanics for Engineers: Statics
EighthEdition
Sample Problem 2.1p
• Graphical solution - A parallelogram with sides equal to P and Q is drawn to scale. The magnitude and direction of the resultant or of the diagonal to the parallelogram are measured,g p g
°== 35N 98 αR
• Graphical solution - A triangle is drawn with Pand Q head-to-tail and to scale. The magnitude and direction of the resultant or of the third side of the triangle are measured,
°== 35N 98 αR
© 2007 The McGraw-Hill Companies, Inc. All rights reserved. 2 - 10
Vector Mechanics for Engineers: Statics
EighthEdition
Sample Problem 2.1p• Trigonometric solution - Apply the triangle rule.
From the Law of Cosines,
( ) ( ) ( )( ) °−+=−+=
155cosN60N402N60N40cos222
222 BPQQPR
N73.97=R
From the Law of Sines,
RB
QA=
sinsinFrom the Law of Sines,
RQBA
°
=
N60155sin
sinsin
AA
+°=°=
°=
2004.15
N73.97155sin
α
© 2007 The McGraw-Hill Companies, Inc. All rights reserved. 2 - 11
A+20α°= 04.35α
Vector Mechanics for Engineers: Statics
EighthEdition
Sample Problem 2.2pSOLUTION:• Find a graphical solution by applying the
Parallelogram Rule for vector addition. The parallelogram has sides in the directions of the two ropes and a diagonal in the direction
A barge is pulled by two tugboats.
p gof the barge axis and length proportional to 5000 lbf.
g p y gIf the resultant of the forces exerted by the tugboats is 5000 lbf directed along the axis of the
• Find a trigonometric solution by applying the Triangle Rule for vector addition. With the magnitude and direction of the resultant
a) the tension in each of the ropes
directed along the axis of the barge, determine
gknown and the directions of the other two sides parallel to the ropes given, apply the Law of Sines to find the rope tensions.a) the tension in each of the ropes
for α = 45o,
b) the value of α for which the • The angle for minimum tension in rope 2 is
determined by applying the Triangle Rule
Law of Sines to find the rope tensions.
© 2007 The McGraw-Hill Companies, Inc. All rights reserved. 2 - 12
)tension in rope 2 is a minimum. and observing the effect of variations in α.
Vector Mechanics for Engineers: Statics
EighthEdition
Sample Problem 2.2p
• Graphical solution - Parallelogram Rule p gwith known resultant direction and magnitude, known directions for sides.
lbf2600lbf3700 TT lbf2600lbf3700 21 == TT
T i t i l ti T i l R l• Trigonometric solution - Triangle Rule with Law of Sines
lbf500021 TT°
=°
=° 105sin30sin45sin
21
lbf2590lbf3660 21 == TT
© 2007 The McGraw-Hill Companies, Inc. All rights reserved. 2 - 13
lbf2590lbf3660 21 TT
Vector Mechanics for Engineers: Statics
EighthEdition
Sample Problem 2.2p• The angle for minimum tension in rope 2 is
determined by applying the Triangle Rule y pp y g gand observing the effect of variations in α.
Th i i i i 2 h• The minimum tension in rope 2 occurs when T1 and T2 are perpendicular.
( ) °30ilbf5000T lbf2500T( ) °= 30sinlbf50002T lbf25002 =T
( ) °= 30coslbf50001T lbf43301 =T( )= 30coslbf50001T lbf43301 =T
°−°= 3090α °= 60α
© 2007 The McGraw-Hill Companies, Inc. All rights reserved. 2 - 14
Vector Mechanics for Engineers: Statics
EighthEdition
Rectangular Components of a Force: Unit Vectorsg p• May resolve a force vector into perpendicular
components so that the resulting parallelogram is a rrrectangle. are referred to as rectangular vector components and
FFFrrr
+=
yx FFrr
and
yx FFF +=
• Define perpendicular unit vectors which are parallel to the x and y axes
jirr
and
• Vector components may be expressed as products of
parallel to the x and y axes.
• Vector components may be expressed as products of the unit vectors with the scalar magnitudes of the vector components.
Fx and Fy are referred to as the scalar components of
jFiFF yxrrr
+=
Fr
© 2007 The McGraw-Hill Companies, Inc. All rights reserved. 2 - 15
Vector Mechanics for Engineers: Statics
EighthEdition
Addition of Forces by Summing Componentsy g p• Wish to find the resultant of 3 or more
concurrent forces,SQPRrrrr
++=
• Resolve each force into rectangular components
( ) ( ) jSQPiSQPjSiSjQiQjPiPjRiR
yyyxxx
yxyxyxyx rr
rrrrrrrr
+++++=+++++=+
Resolve each force into rectangular components
( ) ( ) jQQ yyyxxx
• The scalar components of the resultant are equal to the sum of the corresponding scalar
∑=++=
xxxxx
FSQPR
components of the given forces.
∑=++= yyyy
FSQPR
∑ xF ∑= yF
yR122 −θ
• To find the resultant magnitude and direction,
© 2007 The McGraw-Hill Companies, Inc. All rights reserved. 2 - 16
x
yyx R
RRR 122 tan−=+= θ
Vector Mechanics for Engineers: Statics
EighthEdition
Sample Problem 2.3p
SOLUTION:
• Resolve each force into rectangular components.
i h f h• Determine the components of the resultant by adding the corresponding force components.
Four forces act on bolt A as shown. • Calculate the magnitude and direction
of the resultant.Determine the resultant of the force on the bolt.
© 2007 The McGraw-Hill Companies, Inc. All rights reserved. 2 - 17
Vector Mechanics for Engineers: Statics
EighthEdition
Sample Problem 2.3pSOLUTION:• Resolve each force into rectangular components.
0.759.1291501 ++−−
Fcompycompxmagforce
r
9256961000.11001102.754.2780
3
2−+−
FFF
r
r
r
9.256.961004 −+F1.199+=xR 3.14+=yR
C l l t th it d d di ti
• Determine the components of the resultant by adding the corresponding force components.
22 3.141.199 +=R N6.199=R
• Calculate the magnitude and direction.
N314
© 2007 The McGraw-Hill Companies, Inc. All rights reserved. 2 - 18
N1.199N3.14tan =α °= 1.4α
Vector Mechanics for Engineers: Statics
EighthEdition
Equilibrium of a Particleq• When the resultant of all forces acting on a particle is zero, the particle is
in equilibrium.• Newton’s First Law: If the resultant force on a particle is zero, the particle will
remain at rest or will continue at constant speed in a straight line.
• Particle acted upon by two forces:
• Particle acted upon by three or more forces:- graphical solution yields a closed polygon
- equal magnitude- same line of action
- graphical solution yields a closed polygon- algebraic solution
0== ∑FRrr
© 2007 The McGraw-Hill Companies, Inc. All rights reserved. 2 - 19
- opposite sense 00 == ∑∑∑
yx FF
Vector Mechanics for Engineers: Statics
EighthEdition
Free-Body Diagramsy g
S Di A k t h h i F B d Di A k t h h iSpace Diagram: A sketch showing the physical conditions of the problem.
Free-Body Diagram: A sketch showing only the forces on the selected particle.
© 2007 The McGraw-Hill Companies, Inc. All rights reserved. 2 - 20
Vector Mechanics for Engineers: Statics
EighthEdition
Sample Problem 2.4p
SOLUTION:
• Construct a free-body diagram for the particle at the junction of the rope and cable.
• Apply the conditions for equilibrium by creating a closed polygon from the f li d h i lforces applied to the particle.
• Apply trigonometric relations to determine the unknown force
In a ship-unloading operation, a 3500-lb automobile is supported by
bl A i ti d t th bl
determine the unknown force magnitudes.
a cable. A rope is tied to the cable and pulled to center the automobile over its intended position. What is
© 2007 The McGraw-Hill Companies, Inc. All rights reserved. 2 - 21
the tension in the rope?
Vector Mechanics for Engineers: Statics
EighthEdition
Sample Problem 2.4p
SOLUTION:
• Construct a free-body diagram for the particle at A.
• Apply the conditions for equilibrium.
• Solve for the unknown force magnitudes.
°=
°=
° 58sinlb3500
2sin120sinACAB TT
lb3570=ABT
lb144=ACT
© 2007 The McGraw-Hill Companies, Inc. All rights reserved. 2 - 22
Vector Mechanics for Engineers: Statics
EighthEdition
Sample Problem 2.6p
SOLUTION:
• Choosing the hull as the free body, draw a free-body diagram.
• Express the condition for equilibrium
It is desired to determine the drag force
• Express the condition for equilibrium for the hull by writing that the sum of all forces must be zero.
It is desired to determine the drag force at a given speed on a prototype sailboat hull. A model is placed in a test h l d h bl d
• Resolve the vector equilibrium equation into two component equations Solve for the two unknownchannel and three cables are used to
align its bow on the channel centerline. For a given speed, the tension is 40 lb
equations. Solve for the two unknown cable tensions.
in cable AB and 60 lb in cable AE.
Determine the drag force exerted on the h ll d th t i i bl AC
© 2007 The McGraw-Hill Companies, Inc. All rights reserved. 2 - 23
hull and the tension in cable AC.
Vector Mechanics for Engineers: Statics
EighthEdition
Sample Problem 2.6p
SOLUTION:
• Choosing the hull as the free body, draw a free-body diagram.
ft7 ft1 5
°=
==
25.60
75.1ft 4ft 7tan
α
α
°=
==
56.20
375.0ft 4ft1.5tan
β
β
• Express the condition for equilibrium for the hull by writing that the sum of all forces must be zero.
rrrrr0=+++= DAEACAB FTTTR
© 2007 The McGraw-Hill Companies, Inc. All rights reserved. 2 - 24
Vector Mechanics for Engineers: Statics
EighthEdition
Sample Problem 2.6p• Resolve the vector equilibrium equation into
two component equations. Solve for the two p qunknown cable tensions.
( ) ( ) jiTABrrr
26.60coslb 4026.60sinlb 40 °+°−=
( ) ( )jTiTT
ji
ACACACrrr
rr
56.20cos56.20sinlb 84.19lb 73.34
°+°=
+−=
( )iT
jTiT ACAC
rr
rr
rr
lb 06
9363.03512.0
−=
+=
R
iFF DD
r
rr
0
=
( )( ) jT
iFTR
DACr
r
609363084193512.073.34
0
++
++−=
=
© 2007 The McGraw-Hill Companies, Inc. All rights reserved. 2 - 25
( ) jTAC 609363.084.19 −++
Vector Mechanics for Engineers: Statics
EighthEdition
Sample Problem 2.6p
( ) iFTR
r
r
3512073340
++
=
( )( ) jT
iFT
AC
DACr
609363.084.193512.073.34
−++
++−=
This equation is satisfied only if each component of the resultant is equal to zero
( )( ) 609363.084.1900
3512.073.3400−+==++−==
∑∑
ACy
DACxTF
FTF
lb6619lb 9.42
+=+=
D
ACFT
lb 66.19+=DF
© 2007 The McGraw-Hill Companies, Inc. All rights reserved. 2 - 26
Vector Mechanics for Engineers: Statics
EighthEdition
Rectangular Components in Spaceg p p
• The vector is Fr
• Resolve into Fr
• Resolve intohFcontained in the plane OBAC.
horizontal and vertical components.
FF θ
Resolve into rectangular components
hF
φcoshx FF =
yh FF θsin=
yy FF θcos=
φ
φθ
sin
cossin
hy
y
FF
F
=
=
© 2007 The McGraw-Hill Companies, Inc. All rights reserved. 2 - 27
φθ sinsin yF=
Vector Mechanics for Engineers: Statics
EighthEdition
Rectangular Components in Spaceg p p
• With the angles between and the axes,Fr
FFFFFF θθθ coscoscos ===
( )kjiF
kFjFiFF
FFFFFF
zyx
zzyyxx
rrr
rrrr
θθθ
θθθ coscoscos
++=
===
( )F
kjiF zyx
rrrr
rλ
θθθ coscoscos
=
++=
kji zyxrr
θθθλ coscoscos ++=
• is a unit vector along the line of action ofand are the direction
Fr
λr
θθθ cosandcoscos
© 2007 The McGraw-Hill Companies, Inc. All rights reserved. 2 - 28
and are the direction cosines for F
r zyx θθθ cosand,cos,cos
Vector Mechanics for Engineers: Statics
EighthEdition
Rectangular Components in Spaceg p p
Direction of the force is defined by the location of two points,
( ) ( )222111 and zyxNzyxM ( ) ( )222111 ,,and ,, zyxNzyxM
kdjdid
NMd
zyx ++=
=rrr
r and joining vector
FF
zzdyydxxd zyx
=
−=−=−=rr
121212
λ
( )FdFdFd
kdjdidd zyx ++=
rrrr 1λ
© 2007 The McGraw-Hill Companies, Inc. All rights reserved. 2 - 29
dFdF
dFd
Fd
FdF zz
yy
xx ===
Vector Mechanics for Engineers: Statics
EighthEdition
Sample Problem 2.7pSOLUTION:
• Based on the relative locations of the• Based on the relative locations of the points A and B, determine the unit vector pointing from A towards B.
• Apply the unit vector to determine the components of the force acting on A.
• Noting that the components of the unit vector are the direction cosines for the
t l l t th diThe tension in the guy wire is 2500 N. Determine:
a) components F F F of the force
vector, calculate the corresponding angles.
a) components Fx, Fy, Fz of the force acting on the bolt at A,
b) the angles θ , θ , θ defining the
© 2007 The McGraw-Hill Companies, Inc. All rights reserved. 2 - 30
b) the angles θx, θy, θz defining the direction of the force
Vector Mechanics for Engineers: Statics
EighthEdition
Sample Problem 2.7pSOLUTION:• Determine the unit vector pointing from A
t d Btowards B.
( ) ( ) ( )
( ) ( ) ( )
m30m80m40222
++−= kjiABrrr
( ) ( ) ( )m 3.94
m30m80m40 222
=
++−=AB
kji
kjirrr
rrrr
3180848042403.94
303.94
803.94
40
++
⎟⎠⎞
⎜⎝⎛+⎟
⎠⎞
⎜⎝⎛+⎟
⎠⎞
⎜⎝⎛ −=λ
• Determine the components of the force.rrλ
kji 318.0848.0424.0 ++−=
( )( )( ) ( ) ( )kji
kji
FF
rrr
rrr
N795N2120N1060
318.0848.0424.0N 2500 ++−=
= λ
© 2007 The McGraw-Hill Companies, Inc. All rights reserved. 2 - 31
( ) ( ) ( )kji N795N2120N1060 ++−=
Vector Mechanics for Engineers: Statics
EighthEdition
Sample Problem 2.7p• Noting that the components of the unit vector are
the direction cosines for the vector, calculate the corresponding angles.
kji zyxrrrr
coscoscos ++= θθθλ
kjizyxrrr
318.0848.0424.0 ++−=
o
o
0.32
1.115
=
=
y
x
θ
θ
o5.71=zθ
© 2007 The McGraw-Hill Companies, Inc. All rights reserved. 2 - 32