VaproShield LLC | 915 26th Ave. N.W. | Suite C5 | Gig Harbor, WA 98335 | Toll Free 1-866-731-7663 | www.VaproShield.com | 06/07/21 1 of 3

Vapro-SS Flashing™

a multi-purpose stainless steel self-adhered flashing. Product No.: 49854500, 49854800, 49856000, 49857700

PRODUCT DATA SHEET

Product DescriptionVapro-SS Flashing is a multi-purpose, flexible, stainless steel, self-adhered flashing for use in a variety of applications.

BASIC USE

Vapro-SS Flashing is a transition flashing that provides a watertight bond. It adheres to the majority of air barriers, WRB’s, sealants, insulations, below grade waterproofing and roofing membranes.

MATERIALSVapro-SS Flashing is a flexible 2 mil (0.05 mm) sheet of type 304 stainless steel, 8 mil ( 0.2032 mm) of butyl adhesive and a siliconized release liner.

BENEFITSUse in a variety of applications:

• Flexible 2 mil sheet of type 304 stainless steel

• 8 mils of butyl adhesive with a siliconized release liner

• Best in class puncture and tear resistance

• Install in temperatures ranging from 20°F to 170°F (-6°C to 75°C)

• Stable and air tight from -70°F to 250°F (-56°C - 121°C)

• Class A, ASTM E84 fire rated

• Resistant to mold, mildew and rot

• Sustainable design - manufactured from 60% recycled stainless steel

COMPATIBILITY

Contact VaproShield Technical – if you have additional compatibility questions.

SIZES

Vapro-SS Flashing available in 4, 6, 12, or 18 inches x 50 ft. (10, 15, 30 or 45 cm x 15.24 m)

• Through-Wall Flashing for masonry and stone structural components

• Transition membrane (air barriers, WRB, roofing membranes, plaza and below grade waterproofing)

• Curtain wall perimeter flashing

• Window and door pan fabrication

• Jamb closure flashing

• Roof to parapet transition flashing Installation

STORAGE AND HANDLING Store material in original packaging. Protect rolls from direct sunlight and inclement weather. Storage conditions: (0-100˚F) (-17.8˚ – 37.8˚C)

DETAILSVisit VaproShield.com to view details with multiple applications.

LIMITATIONS Vapro-SS Flashing should be covered within a few days of installation to protect it from damage from different trades, the environment and falling debris.

Avoid placing the adhesive with other materials that have high plasticizer contents.

AvailabilityVaproShield products are available throughout North America, Central and South America, and New Zealand.

WarrantyA 20-year material warranty is available

• All VaproShield materials • Spray Polyurethane

• Exterior Rigid Insulation • Exterior Gypsum

• Plywood • Concrete

• Metals

VaproShield LLC | 915 26th Ave. N.W. | Suite C5 | Gig Harbor, WA 98335 | Toll Free 1-866-731-7663 | www.VaproShield.com | 06/07/21 1 of 3

PRODUCT DATA SHEET

Typical Vapro-SS Flashing ApplicationsVapro-SS Flashing Product™ No.: 49854500, 49854800, 49856000, 49857700

Vapro-SS Flashing Product No.: 49854500, 49854800, 49856000, 49857700

Backup wall construction may vary per design

WrapShield SA Self-Adhered WRB/Air Barrier

Typical cavity insulation by others

Air space for drainage

Typical masonry veneer by others

Mech. fastened VaproTermination Bar w/ cont. bead of VaproBond sealant at top

Typical shelf angle anchored to structure by others

Typical drip edge by othersVapro-SS Flashing

Thru-wall Shelf Angle Detail with VaproTermination Bar

Exterior insultation

Anchored masonry veneer

Continuous mortar collection mesh

Vapro-SS Flashing installed under field membrane lap, shingled over lintel and metal head flashing

Hot dipped galvanized steel loose lintel

Vapro-SS Flashing installed over wood blocking, shingled over field membrane

Single-wythe CMU wall

WrapShield SA installed directly to CMU wall, behind exterior insulation

CMU Backup Wall with Brick Veneer and Post-Applied Ties

WrapFlashing SA Self-Adhered applied directly to sheathing + folded 2.75” inside of R.O.

Vapro-SS Flashing installed in shingle fashion (sill, jambs, head)

Window installation and sealant joints + backer rod (by others)

Head flashing (by others) over Vapro-SS Flashing embedded in VaproBond

Window Rough Opening

VaproShield LLC | 915 26th Ave. N.W. | Suite C5 | Gig Harbor, WA 98335 | Toll Free 1-866-731-7663 | www.VaproShield.com | 06/07/21

ACCESSORIESProduct Part No. Roll Sizes

WrapFlashing Roll (Mechanically Attached) 40105500 40108000

Roll Size: 11 3/4” x 164’ (298mm x 50m) 161 S/F (15 S/M) Roll Size: 19 2/3” x 164’ (500mm x 50m) (25 S/M) Weight: 9.5lbs (4.3kg)

WrapFlashing SA Self-Adhered Roll 4610559046108090

Roll Size: 11 3/4” x 164’ (298mm x 50m) 161 S/F (15 S/M) Roll Size: 19 2/3” x 164’ (500mm x 50m) 269 S/F (25 S/M)

RevealFlashing Roll (Mechanically Attached) 4730500047305500

Roll Size: 6 1/2” x 164’ (165mm x 50m) 88 S/F (8.2 S/M)Roll Size: 11 3/4” x 164’ (298mm x 50m) 161 S/F (15 S/M)

RevealFlashing SA Self-Adhered Roll 44305500 Roll Size: 11 3/4” x 102’ (298mm x 31.1m) 100 S/F (9.3 S/M)

VaproBond Modified Silicone Adhesive Sealant 60309800 20 oz (.57 kg) Sausage Coverage 100 Lin. Ft (30.5 Lin. M)

Outboard Vapor-permeable insulation

WrapShield SA Self-Adhered WRB/Air Barrier

3” overlap vertical seams

Air gap behind claddingWrapShield SA laps over flashing

Vapro-SS Flashing shingled under flashing and over roofing membrane

Flashing (by others)

Roofing membrane (by others)

Low Roof to Wall Detail

PRODUCT DATA SHEET

Typical Vapro-SS Flashing Applications

Vapro-SS Flashing Product™ No.: 49854500, 49854800, 49856000, 49857700

Vapro-SS Flashing Product No.: 49854500, 49854800, 49856000, 49857700

3 of 3

TESTING DATA

PROPERTY STANDARD RESULT

Application Temperature 20°F to 170°F (-6°C to 75°C)

Tensile Strength ASTM D882 Standard Test Method for Tensile Properties of Thin Plastic Sheeting 100,000 psi

Puncture ASTM E154 Standard Test Methods for Water Vapor Retarders Used in Contact with Earth Under Concrete Slabs, on Walls, or as Ground Cover

2,500 psi

Fire ResistanceASTM E84 Standard Test Method for Surface Burning Characteristics of Building Materials

PASS, Class A

Mold Resistance ASTM D3273 Standard Test Method for Resistance to Growth of Mold on the Surface of Interior Coatings in an Environmental Chamber

PASS