Tutorials for coloring and engine assembly The engine compartment is PETg 0.5 mm transparent WITHOUT film. The product is to be cut and color. The package also includes the Duomi Bar

Coloring

Wash the part with soap and

water.

It starts with the coloring on the

back of the motor head (in this

case red).

No need to mask anything, just

make sure not to get the other

side.

Now, on the upper side mask

the motor head that has just

behind and colored by coloring

entire piece.

Usually the real machines have

the inside of the engine

compartment of the same color

of the body.

Color on the top part of the

whole on the engine (hoses,

filter, radiator, etc. ..) with BLACK

opaque.

Use color model or acrylics, apply

with a brush.

Now with markers or paint brush colors refine the details of the various components of the engine.

Cut

Bend the tabs

Attach to the body with adhesive tape or micro screws.

…Good job!

Gallery

All parts are original (no clones) and made by hand, it is possible that you

may be small differences from one to another

tarlo.rc@gmail.com

TaRLo.RC STORE: http://www.rcdrift.it/public/forum/viewtopic.php?f=4&t=35999 Tarlo YouTube Channel: http://www.youtube.com/user/Tarlosky?feature=mhee Tarlo’s Garage: http://www.rcdrift.it/public/forum/viewtopic.php?f=135&t=33453

Tarlo-Rc © 2012