valve mechanism
TRANSCRIPT
-
7/26/2019 Valve Mechanism
1/2
Especificaciones3406E Marine Engine
Valve Mechanism
SMCS -1102
Cerrar SIS
Pantalla anterior
Producto: MARINE ENGINEModelo: 3406E MARINE ENGINE 9WR
Configuracin: 3406E Marine Engine 9WR00001-UP
Nmero de medio -SENR1167-05 Fecha de publicacin -01/03/2005 Fecha de actualizacin -15/03/2005
i01157325
Illustration 1 g00579258
Typical example
Page 1 of 23406E Marine Engine 9WR00001-UP(SEBP2555 - 28) - Estructura del documento
30/11/2005https://sis.cat.com/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sisw...
-
7/26/2019 Valve Mechanism
2/2
(1) Valve rocker arm assembly
(2) Adjusting screw locknut
Tighten the adjusting screw locknut to the following torque. ... 30 7 Nm (22 5 lb ft)
Note: If the engine is equipped with a compression brake, the mounting bolts for the compression brake
replace bolts (3). Refer to Specifications, "Compression Brake".
(3) Bolt
Tighten the bolts to the following torque. ... 109 15 Nm (80 11 lb ft)
(4) Rocker arm shaft
Diameter of a new rocker arm shaft ... 40.000 0.010 mm (1.5748 0.0004 inch)Bore in a new rocker arm bearing for the rocker arm shaft ... 40.065 0.015 mm (1.5774 0.0006inch)
Maximum dimension for the bore in a worn rocker arm bearing for the rocker arm shaft ... 40.193mm (1.5824 inch)
(5) Valve lash
Inlet valves ... 0.38 0.08 mm (0.015 0.003 inch)Exhaust valves ... 0.76 0.08 mm (0.030 0.003 inch)
Note: Refer to Testing and Adjusting, "Engine Valve Lash - Inspect/Adjust" for the correct procedureon setting the engine valve lash.
(6) Camshaft
(7) Valve bridge assembly
Copyright 1993 - 2005 Caterpillar Inc.Todos los derechos reservados.Red privada para licenciados del SIS.
Wed Nov 30 14:53:14 CST 2005
Page 2 of 23406E Marine Engine 9WR00001-UP(SEBP2555 - 28) - Estructura del documento
30/11/2005https://sis.cat.com/sisweb/sisweb/techdoc/techdoc print page.jsp?returnurl=/sisweb/sisw...