The V200 positioner incorporates the flexibility of converting from a pneumatic unit to severalversions of an electropneumatic unit, and the ability to add position feedback, in a matter ofminutes, all in one compact and rugged housing.

Maximum flexibility and versatility!!

With a rugged Nema 4X, IP 66, die cast aluminum housing, versatile polyester coating, andstandard features like external zero and span adjustment, this unit expands the VAC offering tocover this “all in one” market for positioners. Add to this the excellent performance yet simple design, and the combination equals a real value.

A product that offers it “all”….and all in one compact,simple, housing!!

V200 Series Positioners In a single compact and rugged housing

V200Options/Features:

Internal switches-Mechanical or Reed.

Internal 4/20 mA Feedback

External zero and span adjustment-withoutremoving the positioner cover

Five Pilot Options

Flexible mountingfor rotary or linearapplications

Internal Ip with simple loop test points.

Dome Indicator - Black/Yellow Red/Green

V200 Benefits

• Compact Design

• Quality components = rugged and accurate performance

• External zero and span (complete calibration) adjustment without removing cover

• Easily maintain all key components

• Clear, visible indicator with arrow indicator standard-beacon optional

• Field changeable to any available option

The V200 Positioner

V200 E (electropneumatic) Options

V200E-Standard Nema 4X Unit

V200-EX ExplosionProof Unit

V200-FF Fail Freeze Unit

V200E-0/10 Volt Unit

V200E-GA Gas Approved Unit

The V200 Positioner

121.

1 [4

25/

32"]

213.3 [8 13/32"]79.1 [3 1/8"]

61.1

[2 1

3/32

"]

122.

6 [4

13/

16"]

5 [3

/16"

]

45 [1

25/

32"]

45 [1

25/

32"]

Hex size:8.7 [11/32"]

172.

4 [6

25/

32"]

35 [1

3/8

"]

5 [3

/16"

]30

[1 3

/16"

]52

.5 [2

1/1

6"]

39.5 [1 9/16"]

40.5 [1 19/32"]

22.5 [7/8"] Air connections(5x)1/4" NPT

Gauge connections(4x)1/8" NPT

67 [2 5/8"]

132.7 [5 7/32"]

97.4

[3 2

7/32

"]

Rai

sed

Indi

cato

r12

7 [5

"]

31 [1 7/32"]

22

75 [2 15/16"]

57 [2 1/4"]25 [31/32"]

108 [4 1/4"]

62.5

[2 1

5/32

"]47

.5 [1

7/8

"]

15.5

[5/8

"]

Tapped(4x)1/2" NPT

47.5 [1 7/8"] 31 [1

7/3

2"]

25 [3

1/32

"]

62.5 [2 15/32"]

12.5 [1/2"]

Dimensional DrawingVAC Positioner V200 PP/EP

74.8 [2 15/16"]

74.8

[2 1

5/16

"]

5 [3

/16"

]

5 [3

/16"

]

15 [1

9/32

"]

67 [2 5/8"]

72 [2 27/32"]

35.4

[1 1

3/32

"]

57.2

[2 1

/4"]

35.4 [1 13/32"]

57.2 [2 1/4"]

Untapped(4x)UNC 5/16" - depth 15/32"(12mm)

Drilled(4x)M6 - depth 15/32" (12mm)

V200 Dimensional Drawings

V200P, E, -IS

13/32"

10

Hex size

6 13

/16"

173,

4

3/16

"5

4 3/

4"12

1

1 25

/32"

451

25/3

2"45

1 5/

8"41

5 7/

16"

137,

9

2 15/16"74,9

2 13

/32"

61

2 11/16"Ø68

11 9/16"294

8 3/16"207,7

Gauges 1/8" NPT(optional)

3 27

/32"

97,5

5/8"

15,5

1 7/

8"47

,5

2 15

/32"

62,5

4 27

/32"

123

7/16

"10

,82 1/4"57

31/32"25

2 7/32"56

2 31/32"75

5 1/4"133

6 11/32"161,3

5"127

Dome Indicator(optional) Conduit Entry1/2" NPT

V200-EX, E-GA

133.2 [5 1/4"]

270.8 [10 21/32"]

319.7 [12 19/32"]

162.

8 [6

13/

32"]

52.8

[2 1

/16"

]64

.1 [2

17/

32"]

45 [1

25/

32"]

45 [1

25/

32"]

122.

6 [4

13/

16"]

5 [3

/16"

]

61.1

[2 1

3/32

"]

97.3

[3 2

7/32

"]

208.

6 [8

7/3

2"]

Hex size:10 [13/32"]

67 [2 5/8"]

132.8 [5 7/32"]

187.1 [7 3/8"]

22∞

108 [4 1/4"]

57 [2 1/4"]

75 [2 15/16"]25 [31/32"]

Rai

sed

Indi

cato

r12

7 [5

"]

165.5 [6 17/32"]

97.5

[3 2

7/32

"]

12.5

[1/2

"]

33.1

[1 5

/16"

]

31 [1 7/32"]

47.5

[1 7

/8"]

62.5

[2 1

5/32

"]

Tapped(4x)1/2" NPT Tapped

1/2" NPT

V200-FF

V200E 0-10V NOTE: Inches appear in parentheses

Technical Specifications: Positioners: Pneumatic Electropneumatic V200P V200E & -IS V200-EX V200-FFInput Signal 3-15 PSI 4-20mA 4-20 mA 4-20 mASupply Pressure 145 PSI 145 PSI 100 PSI 145 PSILinearity error <0.7% f.s. <1.0% f.s. <0.8% f.s. <1.2% f.s.Hysteresis <0.4% f.s. <0.6% f.s. <0.5% f.s. <0.9% f.sRepeatability <0.3% f.s. <0.5% f.s. <0.4% f.s. <0.8% f.s.Weight P-3.2 lbs E-3.8 lbs. EX-5.3 lbs. FF-5.4 lbs. Temperature range -40 to 185 F -40 to 185 F -40 to 185 F -20 to 158 F -40 to 85 C -40 to 85 C -40 to 85 C -20 to 70 CExtra High Temp (EHT) -40 to 325 F -40 to 162 C Low Bleed Standard High Gain Super High Gain Super High Gain/FlowAir Delivery @87 PSI (600 kPa) 28 scfm 28.8 scfm 31.8 scfm 31.8 scfm 51 scfm Bleed Rate @87 PSI (600 kPa) .2 scfm .35 scfm .53 scfm .53 scfm .71 scfm Pressure Gain 240:1 300:1 800:1 1100:1 1100:1 Air connections 1/4” NPT Gauges 1/8” NPT Cable Entry 1/2” NPT Ingress & corrosion protection NEMA 4X and IP66 Standard coating Polyester

Feedback NEMA 4 Rated General: Plug-in components directly into V200 series positioner housing Can combine switches and 4/20 feedback Conduit connections 1/2” NPT Enclosure Nema 4X/IP 66 Operating temp -40 to +185° F (-40 to +85° C) Mechanical Switches: 2-Type: SPDT, V3 Max Load: Resistive (Inductive) Voltage 15 A (3) A 125/250 VAC 0.25 A (0.1) A 220 VDC 0.5 A (0.2) A 110 VDC 8 A (7) A 24 VDC Reed Switches: 2-Type: SPDT-CO , Form C Contact rating: max 3W Voltage: Switching max 100 VDC Breakdown min 200 VDC Current: Switching max 0.20 A Carry max 1.3 A Contact resistance: 0.2 ohms Contact capacitance: 0.3 pF 4/20 mA Position Feedback: Voltage supply: 7-30 VDC Output: 4-20 mA , 2 wire Loop Impedance: max 850 ohms @ 24 VDC Linearity error: <1.2% Hysteresis: <0.2% Temp. Sensitivity: < 0.1%/10°F (5.5°C)Others Options: Potentiometer-Namur Sensors - Third party EX mounting

Approvals Ratings for hazardous locations:

V200-EX Positioner enclosure is Nema 4X (IP 65)

ATEX-explosion protection1487X, intrinsically safe EEx ia IIC T4/T5/T6E121X, flameproof EEx d IIC T4/T5/T6

FM and CSAExplosion Proof CL I, II Div 1 Grp B-G

Intrinsically Safe FM CL I-II-III Div 1 Grp A-GCSA CL II Div 1&2 Grp E-G CL III

Non IncentiveFM CL 1 Div2 Grp A-C

Temperature Class Short circuit Ambient Temp Current-max maxT6 50 mA 140F (60C)T5 60 mA 158F (70C)T4 60 mA 185F (85C)

V200-IS (Intrinsically Safe)ATEXEEX ia IIcT4/T6

FMCL1 Div1 Grp A B C D

CSAEX ia CL1 Grp A B C DEX ia CL 1 Div2 Grp A B C D

Marketed by VAC (Valve Accessories & Controls), the V200 positioner line issupported by a knowledgeable and professional staff. Customer service is a key component to the VAC package. Local inventories and technical assistance are just a phone call away.

The V200 package includes a diverse mix of positioners and feedback options for mounting to various actuator applications, all in one compact Nema 4X housing. Quality design, manufacturing, and product performance are coupled withcompetitive pricing and excellent service, providing all process industries a cost effective alternative to accurate positioner control and position feedback.

VAC-UK Tel: +44 7815 188179 budenbergnc@btconnect.com

VALVE ACCESSORIES & CONTROLS12942 Bedford Falls DriveCypress, TX 77429TEL: 713-493-2624Cell: 713-253-7781FAX: 281-256-9399randye@vacaccessories.com

VALVE ACCESSORIES & CONTROLS 200 Jade Park Chelsea, AL 35043TEL: 205-678-0507 FAX: 205-678-0510 info@vacaccessories.com

vacaccessories.com

Ordering Codes: Pneumatic V200 P Electro-pneumatic V200 E Explosion Proof V200 EX Intrinsically Safe V200 IS Fail Freeze V200 FF

Spindle DX Front Cover 90 degree rotation 90 60 degree rotation 60 45 degree rotation 45 30 degree rotation 30 Blank scale 00 Indicator Arrow A Beacon B Cam (standard) 90° C145/90° C2 30/60° C3 60/120° (others available) C4 Spool Valve Options (shipped with standard spool)Low Bleed LB High Gain HGSuper High Gain SHGSuper High Gain/Flow SHGHFFeedback Options FB2 SPDT Mechanical Switches M2 SPDT Reed Switches R4-20 mA Transmitter mAMech Switches w/transmitter MmAReed Switches w/transmitter RmAI K potentiometer 1K10 K potentiometer 10KOptionExtra High Temp (Pneumatic only) EHT0/10 Volt I/P (V200E only) 0/10VGas Approved GAExample:V200E-D1-90-B-C1-FB-MmAElectropneumatic with namur spindle, 90 degree cover, raised indicator, 90 degree cam,feedback with mechanical switches and 4/20 mA transmitter.

Spindles (Drive):

D1 Namur - StandardD2 1/2” SquareD3 3/8” Square - ShortD4 Round – LinearD5 Double DD6 3/8” Square - LongD7 3/4” SlottedD8 12mm Dual PostD9 Old Namur - SpecialD10 Namur - SpecialD11 OctagonD12 3/8” Square - EX long

3M 10/10