Intelligent Air Technology

V-Major, V-CompactReciprocating Compressors

Significant Energy Savings

with Lower Running

Costs

Efficient. R

&● LOW POWER CONSUMPTION

75% of the running cost of an aircompressor is energy cost. V-Majorand V-Compact use less energy thanrotary types, giving substantial costsavings every year.

● LONG TERM RELIABILITYHardwearing reliability under allconditions has been designed intoCompAir reciprocating compressors.

● OIL FREE OPTIONFor applications requiring reliable,clean, 100% oil free air.

● LOW COST MAINTENANCERobust design with low runningspeeds, large bearing surfaces and frictionless valves ensure low maintenance.

● SIMPLE SERVICINGRoutine maintenance does notrequire special tools or specialistpersonnel, reducing downtime and costs.

SHAFT POWER COMPARISON – V-MAJOR

Energy

Maintenance

Capital Cost

Cooling

COMPRESSORRUNNING

COSTS

t. Reliable. Built to last.

&

The V-Major compressor is a slow speed, double acting, watercooled design – lubricated or oilfree, and available for pressuresfrom 1.5 to 20.5 bar g, and powerfrom 55 to 280 kW.

OIL FREE OPTION

Available with oil free cylinders for applicationswhere oil cannot be tolerated in the gas or airbeing compressed. Extended piston rods havenon-lubricated packings and self-lubricatingPTFE piston rings run in corrosion resisting,replaceable, austenitic iron cylinder liners.

EFFICIENT REGULATION

The V-Major has three step regulation for full,part, or no load operation to reduce part loadpower consumption.

SUITABLE FOR HIGH AMBIENTS

These robust compressors work equally wellin ambients of up to 550C. The V-Major isequipped with water jackets and intercoolersto maintain correct running temperatures.Closed circuit cooling systems can beprovided for locations where cooling water is not available.

AVAILABLE OPTIONS

• Vee belt driven

• Direct coupled motor

• Suitable for gases other than air

• Custom built packages / specifications

PISTON RODS

Hard chromed to extendthe service life of rod

packings

Extend the service life ofrod packings.

CYLINDERS

Cross hatch honed forextended ring life.

Oil-free versions havereplaceable, corrosion

resisting liners.

Lubricated cylinders can be relined.

Versat i l e . D

3-STEP CONTROL PANEL

Provides comprehensivemonitoring, control and

protection of air pressureand temperature and

lubricating oil pressure toensure elimination of

unnecessary downtime.

CROSSHEAD GUIDES

Replaceable cast ironguides maintain perfectpiston rod alignment.

VALVES

All models have highefficiency, multi-port,

frictionless, plate valves.

Valve seats can bemachined to increase

service life.

PISTONS

Mass balanced pistons toensure low vibration levels.

. Dependable .

The V-Compact is a free standing,single acting, lubricated or oilfree unit set on anti-vibrationmounts and is suitable for air orwater cooling. Pressures rangefrom 1.5 to 10.5 bar g, andpower from 18 to 63 kW.

Vi r tuoso P

OIL FREE OPTIONAvailable with oil free cylinders, forapplications where oil cannotbe tolerated in the gas or airbeing compressed.

IN-BUILTRELIABILITYSubmerged GearType Oil Pump givespositive, force fedlubrication to mainbearing andcrossheads.

Discharge Pulsation Damperextends valve life.

Intercooler ensures cooldelivery air to the second stage.

An Automatic Drain Valve openswhen the compressor unloads.

Comprehensive, clear instrumentationprovides monitoring of machine conditionto plan maintenance.

Air Intake Filter has low resistance to intakeair flow and is combined with a silencer toreduce noise.

SIMPLE INSTA L L AT I O NCompact direct coupled designincorporating integral, anti-vibration mounts,requires no special foundations.

EFFICIENT REGULAT I O NAutomatic Valve Unloading matches outputto system requirements to reduce powerconsumption costs.

AVAILABLE OPTIONS

• Air or Water Cooled Intercooler

• Direct coupled motor or Vee belt driven

• Custom built packages / specifications

TYPICAL APPLICATIONS FORV-MAJORS AND V- C O M PA C T S :

● Power St a t i o n s● Petrochemical Plants● Bulk Powder and Fluid Ha n d l i n g● Steel Works and Fo u n d r i e s● Biogas Recovery at Landfill Si t e s● Desalination Pl a n t s● Cement Manufacturing● C O2 Recovery in Br e w e r i e s● Air Bo o s t i n g● Nitrogen and Natural Gas

Co m p r e s s i o n● Instrument Air● Service/Utility Air● Process Air:-

Nitrogen GenerationFe r m e n t a t i o nAir LiftingSpray Pa i n t i n g

● PET and PEN Bottle Bl o w i n g( H 5 2 8 1 - H 5 2 8 3 )

High pressure

compressors are available for

pressures up to

414 bar g, and powerup to 450 kW

H 5 2 8 2

o Per f o r m a n c e

V-Major and V-Compact – a range to suit all needsCompAir reciprocating compressors have been in

production since the 1920's with a policy of constantimprovements in design and materials. Many

thousands are in service around the world,providing long term, reliable, energy

efficient compressed air in every industryand environment.

With over twenty models available, theV-Major and V-Compact have theversatility to meet a wide range of

applications.

Machines can be supplied for use asvacuum pumps, booster compressors, and for

the compression of gases, including, carbondioxide, nitrogen, methane and biogas.

The product can be suitably adapted to perform inhostile environments.

Additional instrumentation can be fitted quickly andeasily to suit particular requirements.

Compressors can use a variety of power sources,including high or low voltage motors, steam turbines ordiesel engines via a variety of drives. Speeds can beadjusted to match compressor outputs for anyrequirements.

LONG TERM RELIABILITYAND ENERGY EFFICIENCY

Hard wearing reliability under all conditions has beendesigned into CompAir reciprocating compressors.

Accurate manufacturing tolerances and advancedrunning systems make the range exceptionally efficient.Energy consumption is minimised, using automaticvalve unloading to match variable air demand.

FLEXIBLE INSTALLATION AND ACCESSORIES

The whole range is available with vibration absorbingmounts, and baseplate mounted units orcomprehensive packages, including piping and wiringto minimise installation costs.

A complete range of complementary equipment such asintake filters, silencers, aftercoolers, check valves, anddrive systems are available.

CompAir compressed air product range

Advanced Compressor TechnologyLubricated• Rotary Screw > Fixed and Regulated Speed• Piston• Portable

Oil-Free• Water Injected Screw > Fixed and Regulated Speed• Two Stage Screw > Fixed and Regulated Speed• Piston• High Speed Centrifugal - Quantima ®

• Rotary Scroll

Complete Air Treatment Range• Filteration• Refrigerant and Desiccant Dryer• Condensate Management• Heat of Compression Dryer• Nitrogen Generator

Modern Control Systems• CompAir DELCOS Controllers• SmartAir Master Sequencer

Value Added Services• Professional Air Audit• Performance Reporting• Leak Detection

Leading Customer Support• Custom Engineered Solutions • Genuine CompAir Parts

and Lubricants

Global experience ‒truly local service

With over 200 years of engineering excellence, theCompAir brand offers an extensive range of highlyreliable, energy efficient compressors and accessoriesto suit all applications.

An extensive network of dedicated CompAir Salescompanies and distributors across all continents provideglobal expertise with a truly local service, ensuring ouradvanced technology is backed up with the right support.

As part of the worldwide Gardner Denver operation, CompAir has consistently been at the forefront of compressed air systemsdevelopment, culminating in some of the most energy efficient and low environment impact compressor on the market today,helping customers achieve or surpass their sustainability targets.

2018

Our Sales and Service trade counter in High Wycombe.

Subject to our Terms and Conditions of Sale. All prices plus Carriage and VAT