usl 100
TRANSCRIPT
üPredictive Maintenance
üEnergy Savings
üLeak Detection
üSteam Trap Assessment
üCritical Valve Diagnostics
üElectrical Arcing
üCorona DischargeThe USL-100 is an early warning system for detecting facility defects at a very early stage - before the damage
occurs.
The USL SERIES ULTRASONIC DETECTORS are designed for the Rapid, Reliable and Cost-Effective detection of seal
failures and minute leaks within compressed air systems and networks, vacuum systems, industrial equipment
and machinery. Predictive & systematic repairs can avoid expensive disturbances and unscheduled downtime.
Identifying the exact location of a defect entails a quick reaction time to prevent major damages.
With USL-100 it is possible to locate precisely the defects and estimate their magnitude. Its fast and easy
operation can save time, material, energy and condensate losses with a regular checking of fittings, valves and
gates, steam trap, ball bearings. The regular inspection of engines, pumps and gears using USL-100 leads to
increased operational reliability and guarantees a higher degree of availability of machinery. With the
monitoring and study of the flow noise the inspection of the leak tightness of valves, slide valves and steam
traps is also possible.
Compressed air is an environmentally conscious form of energy. However, leakages within the system usually
expand quickly and increase your long term energy costs. Detecting sound emissions in the ultrasonic frequency
range caused by compressed air leakages and electric partial discharges over longer distances reliably and
precisely is possible with the parabolic probes. Practical experiences show that periodic removals of Leaks in
compressed air systems reduce the energy costs by up to 30%. Defect induced noises and wear-tear to various
machinery components and rotating machinery can be recorded electronically. In addition to all individual and
serial testing procedures, all irregularities can be transferred to a PC online and presented and archived in
graphic and tabular format. An optional integrated data logger enables the rapid transfer of data between the
device and your computer via a USB interface.
Ultrasound is generated due to friction caused by the flow of gases, liquids and solids in pipes and leakages.
These signals are processed by the USL-100 and their intensity is displayed on the display screen as well as made
audible through speakers or headphones. This data can be stored and transferred to computer using the
integrated USB interface for further analysis.
ULTRASONIC DETECTORFor Detecting Leaks & Mechanical Malfunctioning
When powerful performance is needed and budgets are limited, choose the USL-100
USL 100
Probe : Airborne for external sound
Touch probe for internal sound
Sensitivity : -65Db / ubar at 40kHZ
Frequency Ranges : 40 1KHZ
Band Width : 2 KHZ
Displays : Alphanumeric Graphics LCD
Headset : Dynamic 32 ohm
Power Supply : 6 V Internal NiMH rechargeable battery
Weight : 175 grams
Dimension : 166 X 88 X 32
Case : High impact ABS Plastic
Operating Temp. : 0-50 deg c
Storage Temp. : -20 deg c to 60 deg c
±
±
DESCRIPTION SPECIFICATION
HNL Systems Pvt. Ltd.: 25/N, Laxmi Industrial Estate, New Link Road, Andheri (W), Mumbai - 400 053, India. Tel: +91 22 4295 2180 / 81.Webstie: | Email: www.hnlsystems.com [email protected]
2
DESCRIPTION APPLICATION
¤Locates leaks in compressed air, gases and vacuum systems.
¤Finds the source of bearing and gear wear.
¤Locates arcing in an electrical system.
¤Detects refrigeration and air conditioning system leaks.
¤Locates leaks in breaks systems, tubes, tire and radiators.
¤Senses cracks in moving rubber V-belts.
¤Check condition of engine seals, door seals.
Compressed Air Leaks
Bearing & Gears
Refrigerant leaks
The USL-100 can be used to detect leaks in pressure-less systems, such as vehicles, freight containers, other types of containers and ventilation technique systems, where no ultrasound is generated. The USL-100 generates ultrasonic waves which emerge at the leak points. Precise location is carried out from the outside with the USL-100. The option of an additional ultrasonic transmitter allows the control of the leak tightness of windows, doors, cabins and devices with little additional expense.
Ultrasound can be generated in a wide variety of processes, for example:¤ at leaks in compressed air, steam and vacuum systems¤ at steam traps¤ at leaky valves, gate valves, shut-offs and valves in piping¤ from roller bearing damages¤ from cavitation at pumps and compressors¤ from flashovers and corona discharges at electrical installations