updated: 10/28/2008 gearless ac pm synchronous machines dave molnar president gary ward vice...
TRANSCRIPT
Updated: 10/28/2008
Gearless AC PM Synchronous Machines
DAVE MOLNARPresident
GARY WARDVice President
Sales
BILL KUHAREngineering
Manager
DENNIS RHODESSales Engineer
Gearless AC PM Synchronous Machines
SECTION ONE
3
Gearless AC PM Overview
Feature Overview
•AC Permanent Magnet Synchronous Design
•Machine, Traction Sheave, Brake, and Encoder provided
•Nearly Maintenance Free – No Brushes to maintain
•Sub Base with Secondary Sheave - Options
•Double Action - Brake Solenoid
•Self-Cooling Motor
•Accessible Lifting Lugs
•Thermal Sensing Device
400 Series
500 Series
800 Series
4
Gearless AC PM Overview
Top 10 Important Features about AC PM Technology
1. Instant start-up (pre-torque)– Because the rotor does not first have to be magnetized, as in an induction
motor, the PM motor is ready to go in milliseconds, potentially improving elevator response time.
2. No standby power required – Unlike a DC motor with a wound field, which may require a constant 500 to
1000 watts of power, the PMAC machine does not consume any power while at rest. This further reduces both the direct power cost and reduces the heat rejected by the elevator into the buildings thermal envelope.
3. High efficiency Operation – The PMAC machine is approximately 15% more efficient than an induction
motor of equal power output. The means lower heat rejection, and more actual mechanical work per kW/h of electricity consumed.
4. Total Enclosed Design– The PMAC motor is so efficient that it needs no internal ventilation. The
enclosed design eliminate the need for cooling fans (eliminating both a failure mechanism and a maintenance task), and keeps all foreign material out of the motor.
5
Gearless AC PM Overview
Top 10 Important Features about AC PM Technology
5. No brushes and or commutator– Eliminates major maintenance concerns, both with the direct replacement
of brushed and the generation of carbon dust. In DC systems, excessive buildup of carbon dust can lead to catastrophic failure of both a hoist motor and MG set.
6. Quiet Operation– The PMAC motor design allows for quieter operation as compared to an AC
induction motor. This is due to the design and construction, and the fact that very low, sub-audible AC frequencies are used. No external fan is used.
7. Responsive Operation– The combination of reduced moving mass and high torque capabilities
make the PMAC motor more responsive to the control system. The result is superior elevator ride quality as well as easier adjustment and maintenance.
8. Power Savings– The use of a regenative drive system further reduces operating costs by
returning energy back to the AC line when the elevator is decelerating or carrying a load.
6
Gearless AC PM Overview
Top 10 Important Features
9. Compact design (65% Smaller than Traditional Geared DC)• PMAC gearless hoists offer the lightest, most
compact package, as compared to traditional DC motor designs.
10. CSA Rated for use in North America
US CANADA
7
Gearless AC PM Overview
Technical Specifications Overview
Frame 800 (Models 805 and 808) at 50% CWT
•1:1 Applications: 2000 to 4500 pound car capacity @ 500 to 1400 fpm
•2:1 Applications: 3000 to 8000 pound car capacity @ 400 to 700 fpm
•Sheaves: 26, 22.5 Inch Based on Rating (5/8 or 9/16 Inch ropes respectively)
Frame 520 (Models 522 and 525) at 50% CWT
•1:1 Applications: 2000 to 3000 pound car capacity @ 100 to 700 fpm
•1:1 Sheave: 20 Inch (1/2 Inch rope)
•2:1 Applications: 1750 to 6500 pound car capacity @ 200 to 700 fpm
•2:1 Sheave: 20 Inch (1/2 Inch rope)
Frame 470 (Models 472, 475 and 478) at 50% CWT
•Applications: 1375 to 4000 pound car capacity @ 100 to 500 fpm
•Roping 2:1
•Sheave 400mm (10 mm ropes)
8
Gearless AC PM Overview
Gearless AC Dual Coil Brake
• Drum Brake
• Dual Coil Solenoid Operation
• Manual Brake Release
• Satisfies Unintended Car Movement for A17.2000
• Each Shoe Operates Independently
• Each Shoe Holds 125% of Capacity
• Ascending Car Protection A17
9
Gearless AC Heidenhain Encoder
Gearless AC PM Overview
Frame 800 Encoder HeidenhainECN113
Frame 520 and 472Encoder HeidenhainECN1313
10
Gearless AC Sub Assemblies
Gearless AC PM Overview
• Sub-Base with Secondary Sheave
• Isolation Under Sub Structure for Vibration
• Rope Guard or Cover
• Brake Switch
• Breakdown Crating 20% Less Weight
Frame 525 Frame 805
11
Gearless AC Sub Assemblies: Scale Dimensions
Gearless AC PM Overview
Gearless AC PM Overview• Gearless AC Efficiency Comparison
GearedAC AC DC AC
Frame 525 475 593 HW64Speed (FPM) 400 400 400 400Capacity (LBS) 3000 3000 3000 3000Counter Weight (%) 40 50 40 40Location Overhead Overhead Overhead OverheadRoped 1:1 2:1 1:1 1:1System Efficiency 90% 85% 90% 90%Gear Efficiency 60%System HP Required 24.2 21 24.2 40Motor Efficiency 90% 90% 90% 90%
Gearless
Gearless AC PM Product Line Summary
• Amazing growth of Gearless PM Machines in the past 15 years
• Revolutionary change to smaller Elevator Traction Products
• Broad range of product offering
• New design releases offered
• Superb Ride Quality
• Top Ten and more features Gearless AC PM
• Designed for New Construction as well as Modernization
800 Series Frame – Gearless AC PM Synchronous
SECTION TWO
15
800 Series Frame
Overview Specifications
Frame 800, 805 and 808 at 45% CWT
•1:1 Applications: 2000 to 4500 pound car cap. @ 500 to 1400 fpm
•2:1 Applications: 3000 to 8000 pound car cap. @ 400 to 700 fpm
•Sheaves: 26, 22.5 Inch 5/8 or 9/16 Inch ropes respectively
16
800 Series Frame
Overview Specifications
•44 poles
•40,000 pound suspended load
•2 Frame Lengths : – Frame 805 = 1911 ft-lbs.
– Frame 808 = 2530 ft-lbs.
•Dual circuit brake (2 coils, 2 springs and 2 brakes)
– Currently being tested
– Each circuit will provide 3392 Ft-lbs.
•Self Cooling, No Auxiliary Fan Required– Totally enclosed motor
•Absolute Shaft Encoder
•Heavy Duty Encoder Guard
17
800 Series Frame
Features
•Ribbed Frame to assist with temperature dissipation
•Cast Iron Frame to reduce Sound
•Rigid Base - Heavy Duty Mounting
•Heavy Duty Long-Life Bearings
•Drum Brakes & Shoes - Independently Activated
•Electrically Activated Brake Solenoid
•Flexible Rope Grooving - U or V Groove
•Multiple Sheave Diameters Available
•Removable Traction Sheave
•Double Wrap Capability
•Up to 12 Grooves
18
800 Series Frame
Removable Sheave and BrakesEnclosed and Self Cooling Motor
Up to 12 U or V Grooves
Hollow Shaft EncoderFour H-D Lifting LugsHeavy Duty Cast Encoder CoverLubrication Fittings Provided
Encoder HeidenhainECN113
19
805 Series Frame: Dimensional Scale
20
808 Series Frame: Dimension Scale
21
800 Series Frame Gearless AC PM Duty Tables
2:1 Roping Left1:1 Roping Below
500 Series Frame – Gearless AC PM Synchronous
SECTION THREE
23
500 Series Frame (1:1 Roping)
Overview Specifications
•Applications for 3000 pound car capacity, up to 700 fpm at 50% CW
•20 poles
•Dual circuit brake - 2215 Ft-lbs (3003 NM) each circuit
•20" sheave ( grooved for 7 1/2 Inch ropes), encoder, and encoder cable.
•Machine weight is 3,630 pounds (1,650 Kg.)
•1:1 Motor developed and tested: 36 HP, 115 rpm, 1667 ft-lb, 460 V (19.2 Hz.) Maximum torque = 3400 ft-lbs.
24
500 Series Frame (2:1 Roping)
Overview Specifications
•Applications for 2000 to 6500 pound car capacity, up to 700 fpm at 50% CW
•20 pole design
•Dual circuit brake - 2215 Ft-lbs (3003 NM) each circuit
•20” (508 mm) grooved for 1/2 Inch ropes, encoder, and encoder cable.
•Machine weight approximately 2,600-3,600 pounds (1,180-1,640 Kg.)
25
500 Series Frame
Important Features
•Designed to displace traditional DC geared machine running 350-500FPM; 2,500 /3,000lbs, 1:1 roping
•60% smaller than traditional geared DC
•No other competitive machine available to meet this Frames specifications
26
522 Series Frame: Dimensional Scale
27
525 Series Frame: Dimensional Scale
28
500 Series Frame Gearless AC PM Duty Tables
2:1 Roping Above1:1 Roping Below
29
400 Series Frame – Gearless AC PM Synchronous
SECTION FOUR
30
400 Series Frame (2:1 Roping)
Overview Specifications
•Frame 470 (Models 472, 475, and 478) at 50% CWT
•Applications: 1375 to 4000 pound car cap. @ 100 to 500 fpm
•Roping 2:1
•Sheave 400mm (10 mm ropes)
31
400 Series Frame
Features
•For Machine or Machine Roomless (MRL) applications
•Mount in any direction with ropes extending toward base
•Frame 472 is 20 poles and is rated at 435 Ft-lbs (590 Nm)
•Frame 475 is 20 poles and is rated at 590 Ft-lbs (800 Nm)
•Frame 478 is 20 poles and is rated at 810 Ft-lbs (1100 Nm)
•Dual circuit brake – Frame 472 is 682 Ft-lbs (925 NM) each circuit
•Dual circuit brake – Frame 475 is 734 Ft-lbs (995 NM) each circuit
•Dual circuit brake – Frame 478 is 1400 Ft-lbs (1875 NM) each circuit
•North American and Asian versions available
•Weight: 900 -1375 pounds
32
472 Series Frame: Dimensional Scale
33
475 Series Frame: Dimension
34
478 Series Frame: Dimension
35
470 Frame Gearless AC PM Duty Table
2:1 Roping
If you have questions, please contact us (330) 734-3600
DAVE MOLNARPresident
GARY WARDVice President Sales
BOB CAPUTO East Coast Sales
DENNIS RHODESSales Engineer