untitled-1 [] · 2016. 5. 27. · your flexible catv solution provider comtech tel.: +36 (96) 412...
TRANSCRIPT
GYŐR HUNGARY
COMTECHYour flexible CATV solution provider
Tel.: +36 (96) 412 299 | Fax: +36 (96) 511 200
E-mail: [email protected] | WEB: www.comtech.co.hu
DOCSIS3.1 compliantforward path
Fully electroniclocal management interface
Optional powering redundancy
HFA1200Headend amplifier
The HFA1200 forward path headend amplifier is designed to compensate the attenuation of the signal combining network and ensure the desired input level of an optical transmitter or a coaxial feeding line. The device is produced in standard Comtech style with local management interface, with RF testpoint and with an additional narrowcast input.
Connection to themonitoring system
Tel.: +36 (96) 412 299 | Fax: +36 (96) 511 200
E-mail: [email protected] | WEB: www.comtech.co.hu
COMTECH Kft. © 1990-2016
H-9028 Győr, Török Ignác u. 66.
HFA1200
POWERSUPPLY
MICROCONTROLLER
FRONTPANEL
BROADCASTINPUT
A SUPPLY
B SUPPLY
RS485
SUMMARY ALARM
NARROWCASTINPUT
TP
OUTPUT
ATT1 EQ ATT2
Technical specificationsForward path Slope setup [dB] 0...6 (0.5 dB steps)
Bandwidth [MHz] 1218 Communication
Gain (Broadcast) [dB] 24 Internal communication RS485
Gain (Narrowcast) [dB] -3 MAC (SCTE 25-2 HMS004) Optional (2)
Flatness [dB] ±0.5 SNMPv1 Optional (2)
Return loss [dB] >16 General
CTB [dBc] -64 (1) Current consumption [mA] 310
CSO [dBc] -70 (1) Power supply voltage [V] 24
XMOD [dBc] -60 (1) Power consumption [W] 7.5
Noise figure [dB] 4.0 Temperature range [C°] 0...+50
Input level setup [dB] 0...16 (0.5 dB steps) Dimensions [mm] 230x130x35
Output level setup [dB] 0...16 (0.5 dB steps) Weight [kg] 0.55
(1) Measured with 79 analog channels plus 75 digital channels at -6 dB offset, 99 dBµV output power, flat tilt.
(2) Depends on the used protocol (SNMP or ComMon).
Block diagram
Tel.: +36 (96) 412 299 | Fax: +36 (96) 511 200
E-mail: [email protected] | WEB: www.comtech.co.hu
COMTECH Kft. © 1990-2016
H-9028 Győr, Török Ignác u. 66.