Developed specifi cally to address the needs of smaller well-pad sites across the shale plays, the Sentinel VariMach Flare provides high throughput capability in a small package, maintaining smokeless combustion at all fl ows. The high capacity of the Sentinel eliminates the need to couple-together multiple fl ares to handle the higher fl ows, reducing capital and maintenance costs, while minimizing operational problems due to unbalanced fl ows.

Fully compliant with 40 CFR 60.18, it meets/exceeds EPA "Quad O" requirements, amongst which requires >95% VOC Destruction Effi ciency and a Continuous Pilot. We however expect the Sentinel to deliver >99% VOC Destruction. Currently under development and to be released as a future upgrade is the AEREON Hot Surface Ignitor (HSI) system or a continuous sparking rod device (Continuum), which provides a redundant source of ignition if the pilot gas fl ows are interrupted for any reason, improving site safety and eliminating the need to shut in production if the pilot fl ame goes out.

The Sentinel VariMach Flare is sold standard as a 6 ft. long tip that can be quickly set up at ground level or mated to a riser for sites that require a taller fl are set-up. Spring-loaded nozzles at the fl are tip provide for higher velocities of exiting gas, that increase combustion effectiveness and reduce the potential for "Liquid rain" that some operations experience using conventional fl are systems.

AEREON can be your single source supplier for all of your gas and vapor combustion and/or recovery needs with high quality and cost effective options for:

• Flares• Enclosed Combustors• Vapor Recovery Units (VRUs)• Thermal Oxidizers• Air Defender Oxygen Removal Units for

battery tanks

Visit www.aereon.com for more information.

• Proven technology guarantees suffi cient inspiration of air plus rapid air/fuel mixing for clean burning

High Capacity• Double the capacity of typical wellpad fl ares, reducing

the need for multiple fl ares• Dual HP/LP tips can handle multiple streams, reducing

fl aring footprint

Safety First• Design by world class combustion engineering group

with a safety culture• Ignition system designed to eliminate electrical

exposure in order to keep personnel safe, reducing reportable incidents

Low, Simple Maintenance• Guaranteed extended working life of pilot, thereby

reducing component replacement and site downtime• High quality construction materials (310 stainless

steel) increase working life of fl are tips and pilot• Quick, easy installation for rapid onsite deployment,

reducing the number of required onsite personnel• Standardized inventory item for quick delivery allows

delivery of systems in less than 2 weeks

www.aereon.com | sales@aereon.com | 16310 Bratton Lane, Austin, TX 78728 USA | +1.512.836.9473 (4/15)

Unparalleled Performance:Emissions• Smokeless, effi cient combustion with no visible emission,

preventing fi nes• EPA "Quad O" compliant reducing emissions in order to keep

sites operating• 40 CFR 60.18 compliant for open elevated fl ares (>95% VOC

destruction effi ciently)

Reliability and Effi ciency• Proprietary ignition system designed specifi cally for combustion

products for a reliable source of ignition• Thousands of installed ignition systems prove reliability• Continuous pilot allowing you to meet "Quad O" regulations• Continuously sparking pilot with low power consumption (1.6

amps)• Optional solar powered ignition panel with 2-week battery

backup for reliable ignition when power is not available or for remote locations with no power on site

Infi nite Turndown• Operates from purge to 100% capacity; operates smokeless

throughout entire range of fl ows

Superior DesignSmokeless Combustion• Spring-actuated nozzles allow the exit area to vary with

pressure, ensuring high velocity of exiting waste gas and 100% smokeless combustion

Model Number CapacitySVM-3 3 MMSCFDSVM-6 6 MMSCFD