unit 16 part 2

7/27/2019 Unit 16 part 2

http://slidepdf.com/reader/full/unit-16-part-2 1/14

7/27/2019 Unit 16 part 2


TARIF A When the wage type with these values are using ininfotype 0008, it will look up for payscale group andpayscale level in configuration ‘Revise payscale groupsand level’.* No need to maintain wagetype in the aboveconfiguration in this case

TARIF B When the wage type with these values are using in

infotype 0008, it will look up for wagetype,payscalegroup and payscale level in configuration ‘Revisepayscale groups and level’.* Maintain wagetype in the above configuration in thiscase

Amount : +

Number /Unit : -

Indirect valuation module : TARIF

Module variant : A

7/27/2019 Unit 16 part 2


With Indirect evaluation module = TARIF and Module variant A, when the wagetype 0110 is used in infotype 8: it will select the amount corresponding to the selected

payscale group and level from the table where amounts are maintained for them.

7/27/2019 Unit 16 part 2


7/27/2019 Unit 16 part 2


Amount : -

Number/Unit : +

Amount Number/Unit Meaning

X X Either amount or number/unit

- - Neither amount nor number/unit+ - Amount essential, no number/unit

- + No amount, number/unit essential

* * At least amount or number/unit

+ . Amount essential, number/unit optional

. + Amount optional, number/unit essential

+ + Amount essential, number/unit essential

. . Amount optional, no number/unit

Time unit/meas : Percent

Indirect evaluation module : PRZNTModule variant : I

Rounding type : B

Rounding divisor : 100

7/27/2019 Unit 16 part 2


Rewritable if this is checked, the calculated amount can be overwritten in IT0008

7/27/2019 Unit 16 part 2


Indirect

valuation

module

Module

Variant

Meaning

PRZNT I - Additional configuration : ‘Define valuation for base wagetypes’

- Number/unit must be +- It calculates the amount based on the percentages and wage

types maintained in the above configuration mentioned ,

calculated to the percentage mentioned in infotype 0008.

- The wagetypes mentioned in the above configuration

should also be maintained in infotype 0008 inorder tocalculate the amount indirectly.

Define valuation of base wage types

Enter the wagetypes and percentages which need to be used for amount calculation. In

this case 50% of 0110 wagetype and 100% of 0120.

7/27/2019 Unit 16 part 2


7/27/2019 Unit 16 part 2


Now create infotype 0008 and enter wagetypes. Remember to 0110 and 0120 beforemaintaining 0130 in IT0008. No need to enter percentage in the number/unit column.

This indirect valuation mode (SUMME and D) will directly calculate the amounts from

the above configuration.

Calculate Amount for wage type 0130 = [50% of wagetype 0110 + 100% of wagetype

0120 ] = [50% of 35 + 100% of 35] == 52,5.

Default wage types

7/27/2019 Unit 16 part 2


Revise Default wage types

Create a new wage type model with the wage types which need to be included and thesequence number.

Mode for wage type assignment

• F: Wage type is assigned in basic pay and cannot be overwritten.

• O: Wage type can be entered and/or overwritten.

Enterprise Structure for Wage Type Model

7/27/2019 Unit 16 part 2


Maintain the feature LGMST, for the personnel area and subarea which you have used.

Return the value 03/HRLY01. Where 03 = number of wagetypes , HRLY01 = wage typemodel

LGMST = Feature to set wage type model for infotype 0008

Now create an IT0008 record. It will default the wage types maintained in wage typemodel.

7/27/2019 Unit 16 part 2


unit 16 part 2

Documents