unique jewelry for mom diy dainty rings out of gauges of wires
DESCRIPTION
If you are planning on designing a unique jewelry for mom, I may recommend this project about how to diy dainty rings out of different gauges of wire only. It does actually look easy enough!TRANSCRIPT
Unique jewelry for mom-diy dainty rings out of gauges of wires
A unique jewelry for mom celebrates her love for
children and usually it typically features the
birthstone of each of her babies. However, in this
post, I may show you another design for the diy
dainty rings. It made use of strands of soft wire and
the only thing you need to do is rotate them in
consistent direction.
Supplies needed in diy dainty rings:
0.5mm (or other size ones) Brass Wire
Cylindrical Stick
Side Cutting Plier
Flat Nose Plier
Instructions on the unique jewelry for mom:
If you are planning on designing a unique jewelry for mom, I may recommend this project about how to diy
dainty rings out of different gauges of wire only. It does actually look easy enough!
: Prepare three strands of the wire, each Step1
about 20cm long. The length may determine the
size of decorative “rose” on upon your ring;
: Wrap both three strands around the Step2
stick once;
: Rotate the two wire ends in clock-wire Step3
direction. Pull them as tautly as you can;
: Keep rotating the two ends in same Step4
direction;
: Stop until the focal “rose” reaches Step5
your desire pattern;
: Take the ring off the stick; Step6
: Wrap the excess wire tails to hold Step7
the ring blank coils together;
: Do the same process on the other Step8
side;
: Try with other gauge of wire you want!Step9
Did the diy dainty rings spark more thoughts about
unique jewelry for mom? Whether an item adorned
with birthstone or include someone’s name, the
handcrafts can definitely embody the unspeakable
emotions and feelings deep in heart.
Jewelry tools needed in your handcraft making please click:
http://www.pandahall.com/beads/wholesale-Jewelry-Tools/0-109-1.html