ubvt0213uk
DESCRIPTION
ÂTRANSCRIPT
Storage tanks
UBVT
2
The new range of enameled vitrified steel UBVT is composed by 7 single or double coil models for the integration
with a BAXI heat generator granting the maximum flexibility of use in different plant configurations where DHW
production is required.*
(*) In case of integrated system with a heat pump or a solar, the specifier is supposed to choose the proper model of tank according to the installation type.
Comfort and flexibility of use
Model Coil Capacity
UBVT 200 SC Single 200
UBVT 300 SC Single 300
UBVT 400 SC Single 400
UBVT 200 DC Double 200
UBVT 300 DC Double 300
UBVT 400 DC Double 400
UBVT 500 DC Double 500
UBVT
3
• Internal tank made of enameled and 850° C vitrified steel that
guarantees a high anti-corrosion protection
• Coil thermal exchangers with a smooth and enameled surface are
welded in the tank
• Polyurethane foam insulation without CFC which grants minimum
heat losses
• ABS external covering
• Magnesium anodes to protect the internal surface of the tank from
corrosion
• 1500 W, 2300 W, 3000 W electrical resistance with adjustable
thermostat available as option
UBVT
UBVT 200 SC
UBVT 200 DC
UBVT 300 SC
UBVT 300 DC
UBVT 400 SC
UBVT 400 DC
UBVT 500 DC
Primary circuit: Solar exchanger
Maximum operating temperature °C 110 110 110 110 110 110 110
Maximum operating pressure bar 10 10 10 10 10 10 10
Exchanger capacity litres 8,1 8,1 10,1 10,1 12,1 12,1 16,8
Exchange surface m² 1,2 1,2 1,5 1,5 1,8 1,8 2,5
Pressure drop at 1 m³/h kPa 1,7 1,7 2 2 2,3 2,3 2,9
Primary circuit: Back-up exchanger
Maximum operating temperature °C - 110 - 110 - 110 110
Maximum operating pressure bar - 10 - 10 - 10 10
Exchanger capacity litres - 5,1 - 6,8 - 6,8 6,8
Exchange surface m² - 0,76 - 1 - 1 1
Pressure drop at 2 m³/h kPa - 4 - 5 - 5 5
Power exchanged kW - 24 - 30 - 30 30
Secondary circuit (DHW)
Maximum operating temperature °C 95 95 95 95 95 95 95
Maximum operating pressure bar 10 10 10 10 10 10 10
Water content litres 200 200 300 300 395 395 500
Number of anodes 1 2 1 2 1 2 2
Weight kg 95 106 113 128 140 159 186
Flow per hour (ΔT = 35 °C) litres per hour - 590 - 740 - 740 740
Heat losses at ΔT = 45 °C kWh/24h 1,8 1,8 2,2 2,2 2,6 2,6 3,0
Performance NL - 0,7 - 1,3 - 2,8 3,8
Dimensions
1- Domestic hot water outlet G1
2- Circulation G¾
3- Exchanger inlet G1
4- Domestic hot water sensor G1
5- Exchanger outlet G1
6- Domestic cold water inlet
+ Drain opening G1
7- Solar exchanger inlet G1
8- Solar exchanger outlet G1
9- Solar sensor positioning
10- Electrical resistance seat
11- Magnesium anode
12- Thermometer
UBVT 200 SC
UBVT 300 SC
UBVT 400 SC
A 287 286 304
B 753 887 858
C 70.5 70.5 66.3
E 1080 1397 1214
G 1323.5 1694 1560
H 1422.5 1795.5 1671.5
I (Ø) 610 610 710
UBVT 200 DC
UBVT 300 DC
UBVT 400 DC
UBVT 500 DC
A 287 286 304 302,6
B 753 887 858 948
C 70,5 70,5 66,3 71
D 900 1127 994 1133
E 1080 1397 1219 1358
F 1170 1487 1309 1448
G 1323,5 1694 1560 1665,7
H 1422,5 1795,5 1671,5 1787
I (Ø) 610 610 710 760
UBVT 200 SC - UBVT 300 SC
UBVT 200 DC UBVT 300 DC - UBVT 400 DC - UBVT 500 DC
UBVT 400 SC
QualityEnvironment
SafetyISO
900
1 - I
SO 14001 - OHSAS
18001
QualityEnvironment
Safetyare Baxi strategic aims and
the awarded certifications
ensure compliance with the
specific regulations
The Company assumes no responsibility for any possible contents mistakes, and reserves the right to make changes in products, due to technical or commercial demands, at any time without notice.
Baxi S.p.A. 02-13 (E)
36061 BASSANO DEL GRAPPA (VI) - ItalyVia Trozzetti, [email protected]